TEVHR HEAT RECOVERY UNITS

Transcription

1 TEVHR HEAT RECOVERY UNITS

2 CONTENTS 1. TEVHR HEAT RECOVERY UNITS DESCRIPTION 2. TEVHR HEAT RECOVERY UNITS ADVANTAGES AND FEATURES 3. TEVHR HEAT RECOVERY UNITS COMPONENTS 4. TEVHR HEAT RECOVERY UNITS TECHNICAL SPECIFICATIONS 5. TEVHR HEAT RECOVERY UNITS CONTROL FEATURES 6. TEVHR HEAT RECOVERY UNITS TESTS

3 TEVHR Heat Recovery Units, are manufactured for ambience in which fresh air is required on the purpose of energy saving. System is based on transferring the thermal energy between exhaust air with fresh air. Units are designed as 9 models in air flow range from,800mᶟ/h to 6000 mᶟ/h.

4 ADVANTAGES & SPECIFICATIONS Heat Recovery and energy saving with high efficiency. Maintainability with the help of unique slim and compact design. Fresh Air or Exhaust Air inlets are compatible with different operating Easy maintainance without disassembling of all components. conditions. Thermal and sound insulation with flame retardant and acoustic insulation material.

5 Carcass Steel carcass improved its corrositon resistance with RAL 9002 paint. Easy Maintainability with service access. Flame Repellant,sound and thermal insulation. Heat Recovery Exchanger: Aluminium plate heat recovery exchanger with long service life. High Thermal transfer Low Pressure Easy Maintainability with service access. Washability.

6 COMPONENTS High Quality indoor air with G4 class synthetic fiber filters. High Thermal and energy efficiency with eurovent certified Heatex and Klingenburg heat recovery exchangers. High Efficiency and Low sound level with aerodynamic fan blades of AC EBM Papst plug fans. EBM labelled plug fan is used in range between 650 with 5000, S&P labelled is used in TEVHR 6000 Unit Control with functional control device.

7 Filters: G4 class filter,which is in conformity with EN 779 Cleanable Support frame filter Easy Maintainability with side and bottom lids. Plug Fan High aerodynamic efficiency with recurvate blades. Low power Consumption Low Noise Level Protecting against overheating Easy maintainability with service access

8 2. Fresh Air and Exhaust Air Fans 1. Heat Recovery Exchanger 3. Filters 6. Sub Hanger 7. Duct Connectors 5. Electrical Box 4. Filter and Fan service cover

9 TECHNICAL SPECIFICATIONS

10 AIR FLOW DIRECTIONS Fanlar, cihazın uç kısımlarına yerleştirilmiş. Egzost ve Taze hava yönleri, cihazın yüz seksen derece döndürülmesi ile şantiye şartlarına göre değiştirilebilir durumdadır.

11 CONTROL SYSTEM ODA KONTROL PANELİ KONTROL KARTI Special design control cards are used in TEVHR; 1. STANDARD (CEILING TYPE OF HEAT RECOVERY UNITS) 2. ADVANCE 3. PRO

12 CONTROL PANEL Control Device which comes with the unit is placed in the enviroment to control the Heat Recovery Unit in required conditions.

13 CONTROL DEVICE STANDARD CONTROL FEATURES: 1. Adjustable fan speed of exhaust and fresh air in 5 different levels, hours filter dustiness setting, 3. Thermic protection for fan motors,

14 ADVANCE CONTROL FEATURES: 1. Adjustable fan speed of exhaust and fresh air in 5 different levels, hours filter dustiness setting, 3. Thermic protection for fan motors, 4. Heater Outlets, 5. Water cooling coil outlets, 6. Heater thermal protection. Incase of overheating the heaters will be deactivated. 7. Boost Function,

15 PRO CONTROL FEATURES: 1. Adjustable fan speed of exhaust and fresh air in 5 different levels hours of dustiness setting, 3. Thermic protection for fan motors, 4. Heater Outlets up to 5 steps, 5. Heater thermal protection.(incase of overheating the heaters are getting deactivated. ) 6. Room temperature control. 7. Temperature control with temperature sensor, placed in duct. 8. CO2 sensor connection, 9. Damper actuator control, 10. BMS control 11. Cooling coil and heating valve control, 12. Fire Alarm signal, 13.Weekly programming, 14. Boost Function,

16 ELECTRICAL HEATERS Limit Thermostats: Automatic Ins brand 70 C is used on spigot duct type of heaters for safety and control. Tecasa brand 110 C Manual Reset Thermostat is also used. Electrical Heater: To increase the temperature of blowing air in cold climates, Circular geometry, Galvanized casing.

17 TESTS : For conformity of EN standarts ; Grounding continuity Test Megger Test Puncture resistance test are applied. For conformity of determination EN 308 Standarts ; Internal Leakage External Leakage Pressure Drop Temperature and Humidity rate tests are applied.

18 THANK YOU