LABEXIA 810 LX Glassware Washer

Transcription

1 LABEXIA 80 LX Glassware Washer

2 Construction and Design The 80 LX Undercounter Washer fits in the same space as a standard, domestic dishwasher but has professional features and stainless steel construction for durability. Complete cleaning is obtained with water circulated in the chamber via spray arms as well as through injectors directly inside of glassware. Chamber and exterior: AISI-0 L stainless steel (ss on all six sides - standalone or undercounter installation ready) Double wall insulation: provides thermal and sound protection Telescopic rails are load bearing for easy loading and unloading Detergent delivery system: liquid detergent automatically injected into wash chamber via peristaltic pump according to programmable parameters. Acid neutralizer delivery system: liquid acid neutralizer automatically injected into wash chamber via peristaltic pump according to programmable parameters. Low level chemical alarms (visual and audible alerts) indicate when chemical levels are low. Two independent wash levels: Provides automatic connection of loading accessories (basic basket, injector racks) Racks interchangeable between levels Glassware determines rack placement and position Microprocessor Control Easy selection of 0 standard washing programs for numerous applications including: Chemistry glassware Bacteriology/virology (high temperature) Stubborn stains (agar) Volumetric glassware (low-temp) Many others Multi Function Rack Easily adjustable parameters (password-protected access) including: program phases, temperature and time of each phase and cleaning chemical dosing. Self-diagnostic program, with visual and audible alarms, alerts the user in the event of a malfunction enabling quick troubleshooting and maintenance. PST Basket Mechanical Washing System Cleaning Chemicals Washing system provides uniform wash/rinse solution on all levels. Superior hydraulic design: Racks connect to hydraulic circuit via automatic, low profile valves Rear rack connections allow for maximum use of chamber volume Door holds racks in place ensuring positive rack connection and efficient flow of wash/rinse solution Top and bottom spray arms ensure complete washing and rinsing of glassware exterior, interior of large mouthed glassware and wash chamber. Programmable water rinses for hot, cold and hot/cold DI water. Available exclusively from Lancer, our premixed detergents and acid neutralizers are specifically made for use in all high pressure washers. LANCERCLEAN Detergent: Formulas (Potassium Hydroxide Based, Sodium Hydroxide Based, ph Neutral) LANCERACID Rinse: Formulas (Acetic Acid Based, Citric Acid Based, Phosphoric Acid Based)

3 Overall Dimensions. H x.6 W x 7. D (in) 8 H x 600 W x 700 D (mm) Total Electric Power Technical Data and Utilities 7 kw Chamber Dimensions 0 H x W x 0 D (in) 08 H x W x 0 D (mm) Drainage Drain pipe diameter. inches, 0 to 7 inches from floor Wash Levels to Voltage 08 V- Ph, 08 V- Ph Water Consumption. gal ( L) per fill Net Weight 88 lbs Recirculation Pump (flow rate) 9 gal/min (0 L/min) Heat Loss,80 Btu/hr (600 Kcal/hr) Heating 6 kw Noise Level <6 dba Water Supply (Cold, DI) Connection Flow Pressure ¾ inch hose thread 0 L/min ( ¼ gal/min) 9-87 psig Multiple Loading Configurations Two Independent Wash Levels allow for flexibility of multiple types of glassware, in a single load, to fit your specific application. Upper level rack can be removed to accommodate for taller glassware on lower level. Configuration Configuration Features and Options Steam condenser is a standard feature which: Prevents build up of condensation Prevents damage to casework Extracts residual moisture from glassware reducing drying time Plinth (stainless steel base cabinet - optional) increases the loading height of the washer by 9. inches and allows for chemical storage under the washer chamber. PS 7/IXLC allows for washing a variety of different types of glassware (such as narrow neck bottles, open-mouth glassware and test tubes) in a single load. The flexibility of this rack reduces the amount of necessary wash cycles. Other available options include: Drain discharge cool down, low pressure valve, door lock, external printer, ph neutralization and IQ/OQ protocol. Contact Lancer for further details on these and other accessories and options. Injector Rack with Lid Accessories Wide range of accessories: If your lab needs higher throughput, the Labexia 80 LX will easily adapt to your needs, as a myriad of accessories will enable you to wash on independent levels pipettes, volumetric flasks, etc. Lancer has the optimal accessory for your application. (See rack catalog for further accessory options.) Multi Function Rack Chamber View Top Available height by rack position PSBT with Small Baskets 9.7 ( mm) PST: Basic Basket, PSBT: Basic Basket with spray arm, IXL: Injection Rack (long jets), IXC: Injection Rack (short jets) Half Rack 9.7 (9 mm) Inches and mm shown

4 LANCER USA Inc. State Rd. 9 Winter Springs, FL 708 Toll Free: (800)-8 Phone: (07)7-888 Fax: (07)7-9 sales@lancer.com JJDE Lancer Sales USA Inc. Lancer is a registered trademark. Lancer is constantly reviewing its products for improvements. Consequently, the actual products may slightly differ from the products pictured and described here. Printed in the USA.

5 LANCER 80 LX Laboratory Glassware Washer Description: The 80 LX fully automatic undercounter or freestanding washer has an electronic programmable microprocessor capable of storing up to 0 programs with 0 user definable functions for pre-wash, wash, rinse and purified/di rinse. These units are capable of injection cleaning on to levels, providing maximum capacity through multiple chamber configurations. Each level has telescopic, load bearing runners to house the racks, eliminating the need to handle loaded racks. Drop down door provides loading platform for lower level. Contact LANCER: LANCER Sales USA Inc State Rd 9 - Winter Springs, FL 708 Toll Free: (800)-8 Phone: (07)7-888 Fax: (07)7-9 sales@lancer.com - Standards: Manufactured under ISO 900 accreditation. Specifications: Dimensions: External:. H x.6 W x 7. D (inches) 8 H x 600 W x 700 D (mm) Chamber: 0 H x W x 0 D (inches) 08 H x W x 0 D Wash chamber load area: Wash Levels - 60 square inches per level, 70 square inches total levels Loading Height: 0 (0 mm) Undercounter Spacing: Fits in standard casework opening Water Consumption:. gal per fill ( L per fill) Heat Loss:,80 Btu/600 Kcal/h Sound Level: <6 dba Cycles: pre-programmed, 0 adjustable Injection Cleaning: to levels Dosing: Automatic detergent and acid dosing via peristaltic pump Steam Condenser: Optional (Standard in US) Standard Features: Drop Down Door Counterbalanced for ease of operation Ensures proper rack placement and connection to manifold Manufactured of solid 0L stainless steel Fully insulated to reduce heat loss and noise Provides loading platform eliminating need for loading cart Fully Extendable, Load Bearing Arms Support jet racks for loading and unloading of glassware Eliminate need for loading cart Spray System Includes one rotary spray arm in top of chamber / one rotary spray arm in bottom of chamber Spray arms made of # sanitary high-grade 0L stainless steel Easily disassembled for cleaning and maintenance System Wash Levels to levels Rack actuated via automatic manifold connections when door is closed Rack accessories independent and easily removable for use on all levels Main Recirculation Pump / HP with capacity of 9 gal/min (0 l/min) Filter System Two stainless steel filters protect recirculation and drain pumps from debris Filters easily removed for cleaning Filters on all incoming water lines Steam Condenser Removes steam vapor when chamber temperature exceeds 0 C Directs all condensate to drain Peristaltic Detergent and Acid Pumps Provides precise addition of chemical agents Wash Solution Heating System 6 kw electric heating elements provides heating up to 9 C Electronic Thermostat Independent selection of temperature for pre-wash, wash and final rinse between ambient and 9 C Microprocessor Control System User programmable with 0 storable programs and 0 user definable functions Version - / Systems Control Panel -½ inch LCD display window 7 Button touch pad is waterproof and glove friendly System Monitoring Audible and visual alarms provide quality control for each wash cycle Water Level Sensors Two independent sensors control chamber water level and prevent overflow Seismic Tie Down Predrilled anchor points for seismic anchoring Programming and Cycle Operation: Pre-Wash - Select number of Pre-Washes (0 to ), length of Pre- Wash (up to 0 minutes), temperature of water (up to 9 C) and detergent. User can select cold or purified water. Wash - Select length of Wash (up to 0 minutes), detergent dosing time and temperature of water (up to 9 C) User can select cold or purified water. Running Water Rinse - Select number of rinses (0 to 9). Unit fills with water, rinses for 0 seconds and drains. User can select cold or purified water. Acid Rinse - Select length of Acid Rinse (up to 0 minutes), amount of acid and temperature of water (up to 9 C). User can select cold or purified water. Running Water Rinse - Select number of rinses (0 to 9). Unit fills with water, rinses for 0 seconds and drains. User can select cold or purified water. Pure Water Rinse COLD - (DI Rinse) Select number of rinses (0 to ). Select length of Pure Water Rinse (up to 0 minutes). User can select cold or purified water. Pure Water Rinse HOT - (DI Rinse) - Select length of Hot Pure Water Rinse (Up to 0 minutes) and temperature of water (up to 9 C). User can select cold or purified water. Safety Features: Door Interlock Prevents interference with wash cycle once it is in operation 80 LX Series - Pg

6 Drop Down Door Eliminates the safety hazard associated with guillotine type doors Counterbalanced for safe operation Optional Features: Drain Discharge Cool Down Wastewater cooled to <60 C Cold water added to effluent during drain phase Seismic Tie Down Predrilled anchor points for seismic anchoring Liquid Level Sensors Determine when cleaning chemical levels are low Low Pressure Valve Kit Provides proper water pressure for purified water supply 6 L Stainless Steel Chamber 6 L stainles steel chamber and door Stainless Steel Plinth Stainless steel base cabinet Raises loading height of washer to 9.6 Third Party Testing Field labeling by independent NRTL (Nationally Recognized Testing Lab) for product safety certification Verify compliance with the UL Standard 600- Construction: Wash chamber and door Constructed of # sanitary AISI 0L stainless steel High-grade finish electronically welded under Argon protection Exterior AISI 0L stainless steel with # high-grade finish Components Constructed of stainless steel or other materials impervious to the effects of detergents, additives and general laboratory chemical residues Insulation Synthetic, rubber based closed cell foam Guards against heat loss and reduces noise level Accessories: Basic Basket Tray and Basket Tray with Spray Arm Washes glassware with large necks or openings such as beakers Mesh cover available for holding items on the basket during the wash cycle Injector Racks Various combinations of jets (including different quantities, different diameters, short and/or long lengths) Allows for washing a wide variety of glassware Mesh hold-down screen available to prevent glassware from becoming dislodged during wash cycle Stainless Steel Mesh Baskets For cleaning smaller items Lids available Combination and Specialty Racks For washing specific items such as pipettes or for multiple types of items on one rack Customized Accessories Modification of existing standard racks or baskets Creation of completely customized accessories Preventative Maintenance: Annual Preventative Maintenance agreements ensure optimum washer performance and extend equipment life Validation Services Installation Qualification and Operational Qualification (IQ/OQ) testing can be executed at the customer site Documentation only packages available separately Cleaning Chemicals: LANCERCLEAN Detergent ( formulas) LANCERACID Rinse ( formulas) Specially formulated for use in high pressure washers Required Utilities: Cold Water Shut off valve with a threaded / inch male hose thread nozzle Flow rate: / gal/min (0 l/min) with a pressure between 9 and 87 psig (00 to 600 kpa) Purified Water Shut off valve with a threaded / inch male hose thread nozzle Flow rate: / gal/min (0 l/min) with a pressure between 9 and 87 psig (00 to 600 kpa) Drain Connection Fixed standpipe and plumbing trap with a minimum inside diameter of / inches (0 mm) needed Height above finished floor level between 0 and 7 inches ( to 700 mm) Flow rate: 0. gal/min (0 l/min) AS AN OPTION unit can be configured for floor draining with optional floor drain kit Condensate Drain Connection Fixed standpipe and plumbing trap with a minimum inside diameter of / inches (0 mm) Height above finished floor level between 0 and 7 inches ( to 700 mm) Flow rate: gal/min (0 l/min) AS AN OPTION unit can be configured for floor draining with optional floor drain kit Electricity (electric models) 08 V, 60 Hz, -Phase, 7 kw, Amps 08 V, 60 Hz, -Phase, 7 kw, 0 Amps 0 V, 60 Hz, -Phase, 7 kw, Amps 0 V, 60 Hz, -Phase, 7 kw, 8 Amps Contact LANCER for Additional info on: Customization Maintenance Contracts Validation Services Cleaning Chemicals Version - / 80 LX Series - Pg

7 Version - / NOTE: DIMENSIONS IN BRACKETS ARE IN INCHES 7. TOP WITH DOOR OPEN mm. [0 ] FRONT SIDE WITH DOOR OPEN. 80 LX TOLERANCE: + _.0 External Dimensions (*) Height:. Width:.6 Depth: 7. Chamber Dimensions Height: 0 Width: Depth: 0 (*) Overall dimensions subject to change according to following selected options (plinth) Required Utilities: Cold Water/Purified water (each requires) - shut off valve (threaded ¾ male hose thread) / flow rate of ¼ gal/min (0 l/min, pressure between 9 and 87 psig (00 to 600 kpa) Drain Connection fixed standpipe and plumbing trap (min. inside diam. ½ inches 0 mm) / height above finished floor 0-7 inches ( 700 mm) / flow rate: 0. gal/min (0 l/min) / AS AN OPTION can be configured for floor draining with optional floor drain kit Condenser Drain Connection - fixed standpipe and plumbing trap (min. inside diam. ½ inches 0 mm) / height above finished floor 0-7 inches ( 700 mm) / flow rate: gal/min (0 l/min) / AS AN OPTION can be configured for floor draining with optional floor drain kit Electricity (electric models) 08 V, 60 Hz, -Phase, 7 kw, Amps 08 V, 60 Hz, -Phase, 7 kw, 0 Amps 0 V, 60 Hz, -Phase, 7 kw, Amps 0 V, 60 Hz, -Phase, 7 kw, 8 Amps 0 /8/09 Add Specifications REV. DATE Drawing# 80 LX Tag # MODIFICATIONS - REVISIONS Title: - GENERAL DRAWING OF THE WASHER - LANCER - 80 LX - Drawn by: Checked by: Scale Sheet: / This plan is the exclusive property of LANCER INDUSTRIES and shall not be disclosed or reproduced without its written authorization. 80 LX Series - Pg

8 LANCER Glassware Washing Accessories

9 Lancer Washing Accessories: flexibility is the key to efficient cleaning Lancer Washers With over years of experience, Lancer is the industry leader in washing equipment. Providing glassware washers to the technological marketplace, Lancer offers a solution to suit any cleaning application. Lancer Glassware washers range from undercounters to free-standing units with varying capacities to suit any wash load. A variety of racks and accessories are available to accommodate all types of glassware and laboratory items. This brochure provides a comprehensive listing of accessories as well as rack placement guides to provide the information you need to choose the right accessory based on your glassware loads and wash cycle needs. Table of Contents Washing Accessories (80 LX/8 LX/80 LX /90 LX / LX /800 LXA)... Washing Accessories ( LXP)...6 Washing Accessories (600 LXP)...8 Rack Position Guides...0 Lancer offers the widest range of washers and accessories. If you have any questions or for further details please contact a Lancer Sales Representative at (800)-8 or visit our website at Lancer Glassware Washer Accessories

10 Lancer Washing: User Friendly Loading Systems p Telescopic Rails: baskets are mounted on fully load bearing rails in the extended position allowing for ease of loading and unloading of glassware. p Glassware Height Adjustment: adjustable star feet allow for various heights of glassware to be washed in the same load. Glassware is placed at the right position to obtain the optimum cleaning and drying results. p Customized Grids: adjustable and fixed support grids are available to optimize load patterns. Interchangeable Accessories p Utilizing the independent water connections at each level allows for baskets to be interchanged among levels, reducing the number of required accessories. p The 90 LX, LX, LXP, 600 LXP and 800 LXA washers are equipped with an additional water connection, allowing for placement of accessories at the required height depending on load configuration. Flexibility: 90 LX chamber shown with two accessories in three different loading configurations. Powerful Glassware Cleaning and Drying p Top and bottom spray arms ensure accurate cleaning of the outside surfaces of the glassware. p Independent water connections on each level guarantee optimal water pressure for cleaning the internal surfaces of the glassware. p Direction Injection Drying: hot air is directed through rack injectors and circulated throughout the washer chamber to ensure rapid drying of the glassware. (On models equipped with injection drying.) Lancer Glassware Washer Accessories

11 Washing Accessories for models: 80 LX / 8 LX / 80 LX / 90 LX / LX / 800 LXA LX 800 LXA 90 LX 80 LX 80 LX/8 LX 00 Injector Racks: mm diam short jets p small narrow neck glassware p 8 IXA - 8 jets p 6 IXA - 6 jets p IXA - jets p GCI - Cover for injector racks p GCI / - Half cover IXA Rack & 6 mm diam short jets IXLC Rack p small narrow neck glassware p 6 IXA/ - 6 jets p IXA/ - jets IXL Rack 6 mm diam short jets GCI Cover p 7 IXC / - half rack 7 jets p 6 IXC - 6 jets p IXC - jets p 8 IXC - 8 jets p IXC - jets 00 6 mm diam long and short jets p 6 IXLC - 6 jets p 8 IXLC - 8 jets p 6 IXLC - 6 jets p IXLC - jets 6 mm diam long jets p 0 IXL D6-0 jets p 6 IXL - 6 jets p 8 IXL - 8 jets p 6 IXL - 6 jets 8 mm diam long jets p 0 IXL - 0 jets Lancer Glassware Washer Accessories

12 00 00 PST Basket LTC / Basket PIP Rack STC Basket Basic Baskets: p beakers p cones p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PST - Basic basket p PSBT - Basic basket with spray arm p GC - Cover for PST/PSBT p GC / - Half cover Small Mesh Baskets: p bottle caps p ferrules p plugs p stoppers p test tubes p STC STC / - short basket (WITH cover) p LTC LTC / - tall basket (WITH cover) p PPM - fine mesh for small items (attached cover) - mm x mm x 9 mm p PPM 80 - fine mesh for small items (attached cover) - 80 mm x 80 mm x mm Pipette Racks: p pipettes p PIP - grommet style p PPI B/B - canister style PS 7 IXLC Rack BP Rack TN Trolley 00 Multipurpose Racks : p beakers p cones p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PS/7 IXLC - / PST basket / 7 jets p PIP/0 IXLC - / pipettes 0 jets p EP/ IXLC - vol flasks jets p 0PIP/ IXLC - / pipette rack jets p PS/ IXLC/ PIP - PST pipettes jets Other Applications : p thin plates p culture dishes p watch glasses p 0 PL - Basket for thin plates p BP - Basket for culture dishes p SSC SSL - Supports p VM / - / basket for watch glasses Storage / Transport: Storage and transport of Lancer Accessories. p p p p RP - Stand to hold racks TN 90 LX - Door plus upper level trolley TN LX - Door plus two upper levels trolley TN 8 LXA - Door plus three upper levels trolley Base Cabinets : Stainless steel base cabinet for undercounter washers only. p p CAPN 8LX - SS plinth for 80 LX and 8 LX CAPN 8LX - SS plinth for 80 LX Lancer Glassware Washer Accessories

13 Washing Accessories for model: LXP LXP Injector Racks: mm diam short jets p small narrow neck glassware p 8 IXA LXP - 8 jets p IXA LXP - jets 00 p GCI LXP - Cover for injector racks IXA Rack p GCI / LXP - / Cover for injector racks IXL Rack IXC Rack & 6 mm diam short jets p small narrow neck glassware p 6 IXA/ LXP - 6 jets p 8 IXA/ LXP - 8 jets p IXA/ LXP - jets 6 mm diam short jets p 8 IXC LXP - 8 jets p 6 IXC LXP - 6 jets p 8 IXC LXP - 8 jets p IXC LXP - jets GCI Cover 00 6 mm diam long and short jets p IXLC / LXP - half rack jets p 6 IXLC LXP - 6 jets p 8 IXLC LXP - 8 jets p 6 IXLC LXP - 6 jets p 8 IXLC LXP - 8 jets 6 mm diam long jets p IXL LXP - jets p 6 IXL LXP - 6 jets p 8 IXL LXP - 8 jets p 6 IXL LXP - 6 jets 8 mm diam long jets p IXL LXP- jets p 9 IXL LXP - 9 jets 6 Lancer Glassware Washer Accessories

14 00 00 PSBT Basket LTC / Basket Basic Baskets: p beakers p cones p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PST LXP- Basic basket p PSBT LXP - Basic basket 00with spray arm 00 p GC LXP - Cover for PST/PSBT p GC / - Half cover Small Mesh Baskets: p bottle caps p ferrules p plugs p stoppers p test tubes p STC STC / - short basket (WITH cover) p LTC LTC / - tall basket (WITH cover) 00 EP/IXLC Rack RP Stand 00 Multipurpose Racks : p beakers p cones p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PIP/ IXLC LXP - / pipette rack jets p EP/ IXLC LXP - vol flasks jets p PS/ IXLC LXP - PST jets Storage/Transport: Storage and transport of Lancer Accessories. p RP LXP - Stand to hold racks p TN LXP - Door plus upper level trolley STC Basket Pipette Racks: p pipettes p PIP LXP - grommet style p PPI B LXP - canister style PIP Rack Lancer Glassware Washer Accessories 7

15 Washing Accessories for model: 600 LXP 600 LXP 00 Injector Racks: mm diam short jets p small narrow neck glassware p IXA 6 - jets p IXA 6 - jets p GCI 6 - Cover for injector racks IXA Rack & 6 mm diam short jets p small narrow neck glassware IXLC Rack p IXA/ 6 - jets p IXA/ 6 - jets IXL Rack 6 mm diam short jets p 6 IXC 6-6 jets p 6 IXC 6-6 jets p 80 IXC 6-80 jets p IXC 6 - jets p IXC 6 - jets GCI Cover 00 6 mm diam long and short jets p 6 IXLC 6-6 jets p 6 IXLC 6-6 jets p 80 IXLC 6-80 jets p IXLC 6 - jets 6 mm diam long jets p 6 IXL 6 D6-6 jets p 6 IXL 6 - jets p 80 IXL 6-80 jets p IXL 6 - jets 8 mm diam long jets p 6 IXL 6-6 jets 8 Lancer Glassware Washer Accessories

16 GC Cover 00 Basic Baskets: p beakers p cones p trays p dishes p dissolution vessels p reaction flasks p funnels p instruments p jars p PST 6 - Basic basket p PSBT 6- Basic basket with spray arm p GC 6 - Cover for PST/PSBT BP Rack Other Applications: p thin plates p culture dishes p wtch glasses p BP 6 - Basket for culture dishes p SSC 6 SSL 6 - Supports p SSC / PS 6 SSL / PS 6 - Supports p VM / 6 - / basket for watch glasses LTC Basket Small Mesh Baskets: p bottle caps p ferrules p plugs p stoppers p test tubes p STC STC / - short basket (WITH cover) p LTC LTC / - tall basket (WITH cover) TN Trolley Storage/Transport: Storage and transport of Lancer Accessories. p RP 6 - Stand to hold p p racks TN 6 - Door plus three upper level trolley NB 6 - Door level trolley Pipette Racks: p pipettes p 0/0 PIP 6 - grommet style PIP Rack Lancer Glassware Washer Accessories 9

17 Rack Position Guide Available Basket Heights LX/8 LX/80 LX Available Basket Heights LX Top Chamber View (Inches and mm shown) Top Chamber View (Inches and mm shown) 9.7 ( mm) 9.7 (9 mm).0 (0 mm) 9.7 (9 mm) 6 Available Basket Heights LX Available Basket Heights LXP Top Chamber View (Inches and mm shown) 7 0 Top Chamber View (Inches and mm shown) 7 0. (60mm) 9.7 (9 mm) (770mm).9 (8 mm) Lancer Glassware Washer Accessories

18 Available Basket Heights Available Basket Heights 600 LXP (770mm) Top 9. (9 mm) 9. (9 mm) (8mm) Top Chamber View.7.9 (Inches and mm shown).79 (6 mm) Chamber View (Inches and mm shown) LXA Accessory Part Number Guide: All Models Injector Racks: IX L LXP D6 = number of injectors IX = rack type L = length of injectors p L = long injectors p C = short injectors p LC = mix long & short injectors p A = mm diam. injectors p C = short injectors p CM = mix of short 6 mm & mm diam. injectors p A/ = mix of short 6 mm & mm diam. injectors LXP = washer model p None = for models 80 LX, 8 LX, 80 LX, 90 LX, LX, 800 LXA p LXP = for model LXP p 6 = for model 600 LXP D6 = special diameter injectors p D6 = 6 mm (8 mm standard diam.) p D8 = 8 mm (6 mm standard diam.) Basic Basket: PST 6 PST = basket type p PST = basic basket for bottom level p PSBT = basic basket with spray arm for upper levels 6 = washer model p None = for models 80 LX, 8 LX, 80 LX, 90 LX, LX, 800 LXA p LXP = for model LXP p 6 = for model 600 LXP Mesh Baskets: STC / STC = basket height p STC = 9 mm p LTC = 6 mm / = basket length p None = mm p / = 09 mm Pipette Racks: 0 PIP 6 0 = number of pipette inserts PIP = pipette basket type 6 = washer model p None = for models 80 LX, 8 LX, 80 LX, 90 LX, LX, 800 LXA p LXP = for model LXP p 6 = for model 600 LXP Lancer Glassware Washer Accessories

19 Lancer USA Inc State Rd 9 Winter Springs, FL 708 Toll Free: (800)-8 Phone: (07)7-888 Fax: (07)7-9 sales@lancer.com JJD LANCER Sales USA Inc. LANCER is a registered trademark. LANCER is constantly reviewing its products for improvements. Consequently, the actual products may slightly differ from the products pictured and described here. Printed in the USA.