AIR COOLED PACKAGED AIR CONDITIONERS

Transcription

1 PLXPMT1726 AIR COOLED PACKAGED AIR CONDITIONERS COOLING ONLY 50Hz Suitable for factories DIRECT AIR BLOW TYPE DUCT CONNECTION TYPE

2 HFC R410A Line Up for Factories and Offices We have entered an era in which being recognized as an environentally responsible corporate citizen has taken utost iportance. Even when selecting air conditioners, a new odel featuring HFC R410A refrigerant could be the perfect step in prooting your corporate iage. Product Line Up Capacity 1, 2 HP Btu/h kcal/h DIRECT AIR BLOW TYPE Indoor DUCT CONNECTION TYPE Cooling only ,000 60,000 80, ,000 12,600 15,100 20,200 25,200 FVGR05NV1 FVGR06NV1 FVGR08NV1 FVGR10NV1 RUR05NY1 RUR06NY1 RUR08NY1 Indoor OUTDOOR UNIT FVPGR10NY1 1

3 DIRECT AIR BLOW TYPE Direct air blow fro indoor with plenu Cofortable factory air conditioning using ultiple indoor s installed in accordance with the space. Installation is next to walls, so s will not affect the factory layout even if the changes are ade. 50Hz , , , ,000 30,200 40,300 45,400 50,400 Nice, cool air in the factory or in the cafeteria FVPGR13NY1 FVPGR15NY1 FVPGR18NY1 FVPGR20NY1 RUR13NY1 RUR15NY1 RUR18NY1 RUR20NY1 2

4 AIR COOLED PACKAGED AIR CONDITIONERS DIRECT AIR BLOW TYPE FVGR10NV1 DUCT CONNECTION TYPE Enhanced varieties of factory odification and optional accesories Standard odel Factory odification Factory Modificaion Auto restart Modify wiring for central control adapter kit (DAT107A55) installation Change fan otor and pulley Discharge grill plenu chaber Side discharge grillon discharge plenu chaber Lower drain pan Front suction high efficiency filter chaber Front suction base flange for front suction high efficiency filter chaber Suction grill for front suction high efficiency filter chaber Fresh air inlet Contact sales for ore infoation Floor Standing Type Direct Air Blow Duct Connection Type Duct Type FVPGR10NY1 Option Rear suction pup Reote sensor(theristor for suction air) All fresh air application Low outdoor tep.15ºc application and long pipe 70 application Central control adaptor kit (external terinal for ON/OFF, abnoral) 1 LCD reote controller 2 intelligent Touch Controller 2 Central reote controller 2 Unified ON/OFF controller 3 Schedule tier 3 Reote sensor (theristor for suction air) 3 Reote controller DAT107A55 BRC1C62 DCS601C51 DCS302CA61 DCS301B61 DST301BA61 KRCS01-1 BRC1NU64 Note: 1 Wiring odification is needed on floor stand odel to connect with central control ADP kit. 2 Need to use central control adapter kit for option connection. 3 Central control adapter kit and LCD reote controller is necessary for option connection. Quiet Operation Equipped with scroll copressor for quiet operation Sooth running, low vibration, low operating sound. RUR05NY1 RUR06NY1 Sound level 380V 415V 59 db 60 db 59 db 60 db 3

5 Easy operation Digital reote control coes standard with indoor. Teperature setting is possible by button operation. The set teperature is conveniently displayed on the LED. Floor standing type (Standard accessory) Refrigerant pre charged for up to 7.5 etres Allowable refrigerant pipe length and level difference RUR05NY1-20NY1 Pre-charged Max. length 50 (Equivalent length 70 ) Max. level difference 30 Note: 1 Additional refrigerant charging is required if the refrigerant pipe is longer than the indicated length. 9 8 Note Note.1 1 On/Off button 4 Tep. setting down 2 Fan button 5 Mode button 3 Tep. setting up 6 LED display Note.1 It cannot be used for FVPGR1020NY1 Duct type (optional accessory) Copressor operation lap. 8 Fan operation lap. 9 Cool operation lap. 4-direction piping affords ore freedo of layout (Applies to RUR05N/06N) Piping can be run fro the front, botto, right or rear surface according to how the is installed. In case of RUR0820N, piping can be drawn out in two directions-front, and under side. Durability Heat exchange fins provided with anti-corrosion treatent (Applies to all outdoor s) To achieve increased durability by iproved resistance to salt corrosion and atospheric pollution, coated PE fins (with special acryl pretreatent) are used for the heat exchanger of the outdoor. 1 Power 2 Teperature scale 3 Teperature setting 4 Mode setting Next setting 6 Fan indicator lap 7 Cool indicator lap Copressor 2 indicator lap 9 Copressor 1 indicator lap 10 Teperature sensor Design flexibility Designed for long refrigerant piping. 50 axiu length and 30 axiu level difference to cover ediu- and large-scale building needs. roof installation possible for plenty of leeway. Space savings Installation space is saved thanks to a ore copact outdoor. This also akes it easier to install. Previous 20HP outdoor RUG10AUY1 X 2 2, NEW RUR20NY1 (20HP) 1,240 53% space saved copared to previous odel 765 Max. length Max. level difference 4

6 DIRECT AIR BLOW TYPE 5HP 6HP 8HP 10HP Model Nae Indoor FVGR05NV1 RUR05NY1 FVGR06NV1 RUR06NY1 FVGR08NV1 RUR08NY1 FVGR10NV1 Power supply V, 50 Hz, 3 Phase, 4 Wires Cooling capacity 1, 3 Power consuption 1 Btu/h kcal/h ,000 12, ,000 15, ,000 20, ,000 25, Running current A Starting current A Power factor % lvory White Indoor Air flow rate (H) 3 /in cf 1,480 1,480 1,910 2,830 Fan Drive Direct Drive 3 Speed Sound level (H/M/L) 2 dba 59/54/50 59/54/50 60/56/51 61/57/52 Diensions (HXWXD) 1,870X750X ,870X750X ,870X950X ,870X1,170X CWB 14 to 25 Ivory white Outdoor Heretically sealed scroll type Copressor Type Motor output Refrigerant Model DAPHNE FVC68D POLYOL ESTER oil Charge L Refrigerant charge (R-410A) 2.5 (Charged for 7.5 ) 3.5 (Charged for 7.5 ) 4.5 (Charged for 7.5 ) 6.0 (Charged for 7.5 ) Sound level 2 380V dba V dba Diensions (HXWXD) 1,345X900X320 1,680X930X CDB 21 to 46 Refrigerant Indoor Liquid o/ 9.5 (Brazing) o/ 12.7 (Brazing) Piping Gas o/ 19.1 (Brazing) o/ 22.2 (Brazing) o/ 28.6 (Brazing) PS 1B Internal thread Outdoor Liquid o/ 9.5 (Flare) o/ 12.7 (Flare) Gas o/ 19.1 (Flare) o/ 22.2 (Brazing) o/ 28.6 (Brazing) o/ 26.0 (Hole) Max. inter piping length 50 (equivalent length 70 ) Max. installation level difference 30 DUCT CONNECTION TYPE 10HP 13HP 15HP 18HP 20HP Model Indoor FVPGR10NY1 FVPGR13NY1 FVPGR15NY1 FVPGR18NY1 FVPGR20NY1 Nae RUR13NY1 RUR15NY1 RUR18NY1 RUR20NY1 Power supply V, 50 Hz, 3 Phase, 4 Wires Cooling capacity 1, Btu/h 100, , , , ,000 kcal/h 25,200 30,200 40,300 45,400 50,400 Running current A Power consuption Starting current % Power factor A lvory White Indoor Air flow rate (H) 3 /in cf 2,830 4,240 5,720 Fan Drive Belt Drive Ext. Static Pressure Pa(H2O) 15 Sound level 2 dba Diensions (HXWXD) 1,740X1,170X510 1,870X1,170X720 1,870X1,470X CWB 14 to 25 Ivory white Outdoor Heretically sealed scroll type Copressor Type Motor output Refrigerant Model POLYOL ESTER oil Charge L Refrigerant charge (R-410A) 6.0 (Charged for 7.5 ) 4.5 (Charged for 7.5 ) 8.0 (Charged for 7.5 ) Sound level 2 380V dba V dba Diensions (HXWXD) 1,680X930X765 1,680X1,240X CDB 21 to 46 Refrigerant Indoor Liquid o/ 12.7 (Brazing) o/ 15.9 (Brazing) Piping Gas o/ 28.6 (Brazing) o/ 34.9 (Brazing) PS 1B Internal thread Outdoor Liquid Gas o/ 12.7 (Flare) o/ 28.6 (Brazing) o/ 15.9 (Flare) o/ 34.9 (Brazing) Max. inter piping length 50 (equivalent length 70 ) Max. installation level difference 30 Note : 1 Rated cooling capacities are based on the following conditions : Return air tep., 27 CDB, 19.5 CWB; outdoor tep. 35 CDB. Equiv. refrigeration piping, 5 (horizontal). 2 Anechoic chaber conversion value, easured according to JIS paraeters and criteria. During operation these values are soewhat higher owing to abient conditions. 3 Capacity includes indoor fan otor heat. 5

7