SAFETY PLUMBING PACKAGES. Quality Products & Value Packages SUSTAINABILITY. Residential Solutions ANTI-SCALE SYSTEMS FIRE PROTECTION
|
|
- Paulina Burke
- 5 years ago
- Views:
Transcription
1 Quality Products & Value Packages Residential Solutions FIRE PROTECTION COMFORTSUSTAINABILITYCONTROL PRESSURE REGULATORS TRENCH DRAINSHVAC SYSTEMS SAFETY ANTI-SCALE SYSTEMS HEATING & COOLING CONTROLS PLUMBING PACKAGES SUSTAINABILITY OneWattsWater.com/Residential From the Companies of
2 RADIANT HEATING FLOOD PROTECTIONCONTROL MIXING VALVES VALVES AND FITTINGS WATER FILTERS GAS CONNECTORS WATER QUALITY BACKFLOW PREVENTERS WATER SOFTENERS Partner with Watts Water FIRE PROTECTION
3 ...and Save Time & Money At Watts Water, we offer: One point of contact for the most comprehensive family of plumbing, heating, and water quality brands in the industry, from curb key to fixtures Bundled rough plumbing packages that offer significant cost savings versus working with multiple manufacturers Deep roots in the industry we ve been manufacturing high-quality products since 1874 Long-standing relationships with all the major wholesalers in North America, and an established network of knowledgeable and experienced sales representatives throughout the country Leadership in providing high-quality, reliable, and compliant Lead Free products to meet the new national Lead Free law, ensuring you don t put your business at risk A diverse family of companies that offer multiple products to enhance a building, from rainwater harvesting and radiant floor heating systems to water quality & conditioning solutions MAKE US YOUR SINGLE SOURCE We offer a full spectrum of residential plumbing products, including: Backflow preventers Water pressure reducing valves Mixing valves Control valves Relief valves Pipeline strainers Expansion tanks Ball valves Shower drains Tankless water heater kits Hose bibbs Dielectric unions Wall hydrants Gas connectors Flood protection control products And much more
4 Transform a Multi-Family Dwelling
5 into a Safe & Efficient Building Living Areas Reverse osmosis filtration system Electric floor warming Gas connectors Tempering valves Stainless steel shower drains Washing machine shutoff valves Shutoff valves Fire Protection Systems Automatic control valves Backflow preventers Check valves Float valves Gate valves Pre-engineered valve stations Transition risers UL/FM ball valves UL/FM fire service strainers Outdoors & Underground Backflow enclosures Backflow preventers Cast iron roof drains Cleanouts Freeze-resistant wall hydrants Insulated piping systems Pressure relief valves Rainwater harvesting systems Roof drains Scupper drains Snow melting systems & controls Trench drains Vacuum breakers Drainage Systems Fixture carriers Floor drains Interceptors Roof drains Trench drains Cleanouts Mechanical Room Anti-scale systems Backflow preventers Balancing & relief valves Ball & butterfly valves Flood protection shutdown control valves Gate, globe & check valves Gauges High temperature alarm and shut-downs Pipeline strainers Pressure reducing valves RO water filtration systems Water filtration systems Water heaters Water softeners HVAC Systems Anti-scale systems for tankless water heaters Automatic air vent valves Automatic control valves Backflow preventers Combination fill valves & backflow preventers Electronic temperature controls Expansion tanks Feed water regulators Float valves Flow measurement & balancing valves Flow switches Gas connectors High efficiency boilers Hydronic & electric floor warming systems Hydronic manifolds & controls Mixing valves & systems Multi-stage boiler controls Purge & drain valves Wafer & silent check valves Radiant hydronic heating systems Safety relief valves Steam traps
6 Potable Water Systems The Watts Water family of companies offers a variety of products and solutions designed to improve system efficiency and ensure the safe control of domestic cold and hot water systems. Backflow Preventers Control Valves Mixing Valves & Sytems Pressure Regulators Relief Valves Water Filtration & Softening Systems Strainers Anti-Scale Systems Shutoff Valves
7 HVAC Systems The Watts Water family of companies offers a wide range of HVAC systems and solutions, including heating and cooling controls, radiant heating and snow melting systems, backflow preventers, boilers, water heaters, and tempering valves. Heating, Cooling & Snow Melting Controls Radiant Heating & Floor Warming Systems (Hydronic & Electric) Steam Traps Snow/Ice Melting Systems (Hydronic & Electric) Backflow Preventers Water Heaters Boilers Gas Connectors Balancing Valves
8 Fire Protection Products The Watts Water family of companies offers a variety of fire suppression products designed to protect residents and property. These products are easy to install, flexible in design, and meet all requirements of the National Fire Protection Association (NFPA). Transition Risers Double Check/Double Check Detector Valve Assemblies Reduced Pressure Zone/Reduced Pressure Detector Assemblies Automatic Control Valves Fire Pump Relief Valves Fire Pressure Relief Valves Check Valves UL/FM Fire Service Strainers UL/FM Ball Valves
9 Drainage Systems The Watts Water family of companies offers a wide range of solutions for the safe drainage of sanitary sewer and storm water, as well as for the capture of rainwater for reuse for a facility. Fixture Carriers Trench Drains Roof Drains Floor Drains Interceptors Rainwater Harvesting Systems Channel Drains Cleanouts Green Roof Drains
10 Water Quality & Conditioning Products The Watts Water family of companies offers a variety of water quality and conditioning products designed to treat water for safe and efficient use in residential applications.. Anti-Scale Systems Water Softeners Whole Building Reverse Osmosis Systems Point of use Reverse Osmosis Systems UV Disinfection Sytems Media Filtration Sytems Drinking Water Systems Replacement Filters and Cartridges Replacement Parts and Accessories
11 Leading the Way on Lead Free Watts Water Technologies lead the way on the development of Lead Free products for the plumbing industry. Our 30,000-square-foot U.S.-based foundry was constructed in 2013 to exclusively produce Lead Free products.
12 The History of Watts Water Watts Water Technologies has a long history in the plumbing & heating industry for 140 years the companies and brands of Watts Water have been leaders in quality & innovation. Today, the Watts Water family of companies offers one of the most diverse product lines in the world for residential, commercial, industrial, and municipal settings. Want to learn more? Contact your local sales representative for more information. wattswater.com USA: Tel: (978) Fax: (978) Canada: Tel: (905) Fax: (905) Latin America: Tel: (52) F-WWT-Residential Watts Water Technologies
Your Single Source Partner with Watts for a Comprehensive Suite of Innovative Water Solutions
Your Single Source Partner with Watts for a Comprehensive Suite of Innovative Water Solutions WATER UALITY ACKFLOW REVENTION LUMBING & LOW CONTROL OneWattsWater.com Watts is the Smart Choice Foodservice
More informationYour Single. Source. Partner with Watts Water. for a Comprehensive Suite. of Innovative Water Solutions. OneWattsWater.com
Your Single Source Partner with Watts Water for a Comprehensive Suite of Innovative Water Solutions OneWattsWater.com SINCE 1874 INNOVATIVE SOLUTIONS RESIDENTIAL CONST COMMERCIAL CONSTRUCTION MUNICIPAL
More informationGARCIA GALUSKA DESOUSA Consulting Engineers
L#58619/Page 1/November 1, 2017 PLUMBING Executive Summary: Presently, the Plumbing Systems serving the building are cold water, hot water, sanitary, waste and vent system, storm drain piping, and natural
More informationDOCUMENT TABLE OF CONTENTS
DOCUMENT 00003 June 16, 2005 TABLE OF CONTENTS DOCUMENT NO. INTRODUCTORY INFORMATION DOCUMENT 00003 TABLE OF CONTENTS DIVISION 1 GENERAL REQUIREMENTS SECTION 01011 SECTION 01025 SSP21.1-1 SECTION 01026
More informationPRODUCT CATEGORY: Plumbing & Mechanical FALL 2018
PRODUCT CATEGORY: Plumbing & Mechanical FALL 2018 High Efficiency Condensing Boilers & Water Heaters www.aceheatingllc.com Team6 Territory: NM, TX (Dallas/Houston/El Paso Only) Rubber Insulation. The Makers
More informationSouthern Office SandiaGroup 7250 Copper Queen Dr., Suite C El Paso, TX Tel Fax
HVAC SPRING 2017 Rubber and Foam Insulation. The Makers of Armaflex www.armacell.com TX, OK, (LA & AR HVAC Only) Commercial Pumps. CBV s FTVs & Suction Guides; Domestic & Waste Water, Residential & Light
More informationDESIGN AND CONSTRUCTION STANDARDS GENERAL DESIGN GUIDELINES
2.05 PLUMBING GENERAL DESIGN AND CONSTRUCTION STANDARDS GENERAL DESIGN GUIDELINES - 2.05 It is expected that the plumbing design professional will conform to accepted good engineering design practices.
More informationPLAN REVIEW SUBMITTAL GUIDE
PLAN REVIEW SUBMITTAL GUIDE Plans, specifications and other construction documentation for the initial plan review should be as complete as possible at the time of submittal. Use this convenient guide
More informationSummary of BBS Proposed Ohio Plumbing Code Rule Changes October 2016
Summary of BBS Proposed Ohio Plumbing Code Rule Changes October 2016 Ohio Administrative Code Rule Number OPC Section IPC origin Reason for proposed 4101:3-2-01 Alternate on-site 2015 Added definition
More informationSCHOOL DISTRICT PALM BEACH COUNTY BUILDING DEPARTMENT PLAN REVIEW CHECK LIST -- PLUMBING
SCHOOL DISTRICT PALM BEACH COUNTY BUILDING DEPARTMENT PLAN REVIEW CHECK LIST -- PLUMBING 3300 SUMMIT BOULEVARD WEST PALM BEACH, FLORIDA 33406 TEL (561) 688-7687 FAX (561) 688-7654 http://www.palmbeach.k12.fl.us/fm/bd/index.htm
More informationFlow Control for Fire Protection
Flow Control for Fire Protection Valve Solutions From An Industry Leader AmesFireWater.com Count on the Fire Protection Leader for Reliable Flow Control Solutions Ames provides a range of high-quality
More informationFlow Control for Fire Protection
Flow Control for Fire Protection Valve Solutions From An Industry Leader AmesFireWater.com Count on the Fire Protection Leader for Reliable Flow Control Solutions Ames provides a range of high-quality
More informationA. This Section includes the following emergency plumbing fixtures:
Page 224500-1 SECTION 224500 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationSECTION DOMESTIC WATER PIPING SPECIALTIES
SECTION 22 11 19 DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationMATERIALS Traps TRAPS. No. IPC IRC Description
MATERIALS Traps TRAPS MAX " MAX 0" No. IPC IRC Description 00. P0.6 00. P0.6 00. P0. 00. () P0.6 Exc. Vertical distance from fixture to the trap weir can not exceed ". Horizontal distance from the fixture
More informationC. ASSE 1013: Performance Requirements for Reduced Pressure Principle Backflow Preventers.
SECTION 22 10 00 PLUMBING PIPING AND PUMPS PART 1 - GENERAL 1.1 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design.
More informationA. This Section includes the following domestic water piping specialties:
SECTION 221119 DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationRead Only Document Not For Distribution
Chapter 9 Indirect Waste Piping and Special Wastes 9.1 INDIRECT WASTES 9.1.1 General Drains from fixtures, fixture compartments, equipment, appliances, appurtenances, and other devices requiring protection
More informationComfort. Quality. Conservation. Safety. Control. Innovative Water Solutions
Comfort Quality Conservation Safety Control Innovative Water Solutions A LETTER FROM THE CEO Dear Investor, I am pleased to introduce to you the fascinating world of Watts. At Watts Water Technologies,
More informationRead Only Document Not For Distribution
Chapter 5 Traps, Cleanouts and Backwater Valves 5.1 SEPARATE TRAPS FOR EACH FIXTURE a. Plumbing fixtures shall be separately trapped by a water seal trap placed as close as possible to the fixture outlet.
More information2016 Plumbing Supplemental Plan Review List
Building Division 555 Santa Clara Street Vallejo CA 94590 707.648.4374 2016 Plumbing Supplemental Plan Review List POTABLE WATER SYSTEM P1. Specify which fixtures are for private use and which are for
More informationHealthcare Solutions. The Right Remedies for Patient Safety and System Efficiency
Healthcare Solutions The Right Remedies for Patient Safety and System Efficiency Partner with Watts for all your Water Heating Needs Complete Heating and Water Management Solutions Infused with more than
More informationTABLE OF CONTENTS. CHAPTER 2 DEFINITIONS General Applicability Definition of Terms General...
TABLE OF CONTENTS CHAPTER 1 ADMINISTRATION................1 101.0 Title, Scope, and General...........1 101.1 Title............................1 101.2 Purpose.........................1 101.3 Plans Required...................1
More informationRead Only Copy Not For Distribution. Chapter 10. Water Supply and Distribution 10.1 QUALITY OF WATER SUPPLY 10.2 RESERVED 10.
Water Supply and Distribution 10.1 QUALITY OF WATER SUPPLY a. Only potable water shall be supplied to plumbing fixtures used for drinking, bathing, culinary use or the processing of food, medical or pharmaceutical
More informationPLUMBING INSTALLATIONS
PLANNING, PROPERTY AND DEVELOPMENT DEPARTMENT PLUMBING INSTALLATIONS A homeowner guide to plumbing requirements for single-family dwellings November 2017 contents Permit Requirements... 3 Inspection Requirements...
More informationBuilding Utilities 1 Plumbing and Sanitary Systems
Building Utilities 1 Plumbing and Sanitary Systems Taken from UST Architecture exams by Arch. Rafael Alli Recommended review material for UST Preboard Exam Prepared by: arkireviewph.multiply.com Types
More informationPLUMBING REQUIREMENTS
PLUMBING REQUIREMENTS This handout is a compilation of the standard requirements based on the State Plumbing Code and City Ordinance for projects of this type. This information sheet does not contain all
More informationMechanical System Description
1. Building Description: Mechanical System Description The building is a Type-1B construction, 9-levels, non-high rise building with 67 affordable family housing units. The first level of the structure
More informationDIVISION 22: PLUMBING DESIGN STANDARDS TABLE OF CONTENTS
DIVISION 22: PLUMBING DESIGN STANDARDS TABLE OF CONTENTS I. PURPOSE II. III. IV. GENERAL A. DESIGN DOCUMENTS B. INSPECTIONS C. CLOSE-OUT Project Record Documentation Training D. ENERGY USE E. LABELING
More informationGulfport, Mississippi 21 May 2007
G PLUMBING GENERAL REQUIREMENTS The D-BC shall design the plumbing system to comply with this criteria and the Plumbing Code. Piping shall be shown on the same plan as the fixtures being served. Pipe size
More informationDOMESTIC WATER PACKAGED BOOSTER PUMPS
DIVISION 22 PLUMBING 22 11 16 DOMESTIC WATER PIPING 22 11 19 DOMESTIC WATER PIPING SPECIALTIES 1. To facilitate landscape and other maintenance operations, exterior hose bibs shall be provided at 150 foot
More informationPlumber Level 3 Rev. May 2011
Level 3 C1 Commercial Sanitary Drainage Systems Duration: 16 hours 10 hours 6 hours This unit of instruction is designed to provide the Plumber apprentice with the basic knowledge and understanding of
More informationTABLE OF CONTENTS Limitations of Authority...6 Table Swimming Pool, Spa, and Hot Tub Permit Fees...7
TABLE OF CONTENTS CHAPTER 1 ADMINISTRATION..............1 101.0 General.......................1 101.1 Title..........................1 101.2 Scope........................1 101.3 Purpose......................1
More informationSECTION LABORATORY and DE-IONIZED WATER SYSTEMS STANDARD CONSTRUCTION STANDARD
PART 1: GENERAL 1.01 Codes and Standards: A. Plumbing Code Compliance: Comply with applicable portions of National Standard Plumbing Code pertaining to selection and installation of Plumbing materials
More informationC1N & C2N SERIES Fluid heating for light industrial applications
Keltech Electric Tankless Water Heaters C1N & CN SERIES Fluid heating for light industrial applications Contents Keltech Electric Tankless Water Heaters C1N & CN Series Overview Standard Features 6 Optional
More informationMatrix of changes for the National Standard Plumbing Code July 2013
Matrix of changes for the National Standard Plumbing Code July 2013 Item # Section Number Person Submitting Change Committee Action 10-77 10.20.8 and Table 3.1.3 XI Certification 10-82 12.16 Size and Lengths
More informationMechanical Inspection Plumbing
0811 Fixtures Sinks, drinking fountains, water closets, showers, etc. Classroom Sinks. Classroom sinks (19) are enameled cast iron self rimming side ledge with gooseneck faucet trim with index handles,
More informationCopyright 2003 and 2005 by The American Institute of Architects (AIA) Modified by MSU Physical Plant / Engineering and Architectural Services
Page 238216-1 Copyright 2003 and 2005 by The American Institute of Architects (AIA) Exclusively published and distributed by Architectural Computer Services, Inc. (ARCOM) for the AIA Modified by MSU Physical
More informationINSPECTION OF COMMERCIAL KITCHEN PLUMBING
INSPECTION OF COMMERCIAL KITCHEN PLUMBING 801.1 SCOPE Food-handling establishments 2 - by John Williams, Jr. Plumbing Control Supervisor Onondaga County Water Environment Protection Commercial Kitchens
More informationPipe Sizing Table. Hydraulic Load Served (fixture units)
MODULE 1 INTRODUCTION Notes: A Pipe Type Horizontal branch Pipe Sizing Table Hydraulic Load Served (fixture units) Size (in.) Code Reference 2 + 1.5 = 3.5 2 7.4.9.1.(1) B Soil stack 13.5 + 13.5 = 27 3
More informationSUMMER PRODUCT CATEGORY: Plumbing & Mechanical
PRODUCT CATEGORY: Plumbing & Mechanical Gas Utility Controllers for Laboratories www.americangassafety.com Pump Controls, Switches, Control Panels for Timed Dosing, Water Well, Smart Panels, Custom Elevator
More informationPRODUCT MASTERSPEC 2016 UPDATE PROJECT - STATUS 4/4/2016
PRODUCT MASTERSPEC 2016 UPDATE PROJECT - STATUS 4/4/2016 Section No. Section Title Section Description Apollo Products EPC Products LASCO Products 210523 GENERAL-DUTY VALVES FOR FIRE PROTECTION PIPING
More informationSEPARATION AND CONSTRUCTION REQUIREMENTS FOR SEWER AND WATER LINES (PARALLEL)
SEPARATION AND CONSTRUCTION REQUIREMENTS FOR SEWER AND WATER LINES (PARALLEL) W-1/S-3 SEPARATION AND CONSTRUCTION REQUIREMENTS FOR SEWER AND WATER LINES (CROSSINGS) W-2/S-4 TYPICAL TRENCH BACKFILL DETAILS
More information1 WATERMARK CERTIFICATION SCHEME SCHEDULE OF PRODUCTS This document was adopted 1 August 2017 and replaced the WaterMark Schedule of Specifications
1 WATERMARK CERTIFICATION SCHEME SCHEDULE OF PRODUCTS This document was adopted 1 August 2017 and replaced the WaterMark Schedule of Specifications Product type Application Specification Appliances Bedpan
More informationA. ASHRAE Handbook HVAC Applications, Snow Melting and Freeze Protection
PAGE 238318-1 SECTION 238318 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification sections,
More informationAPPENDIX J ILLUSTRATIONS
The following figures have been included in the 1994 edition of the Standard Plumbing Code to aid in interpreting this code. The figures are not to be construed as superseding the written text, but merely
More informationIntroduction. Our Company provides full turnkey projects. We stock a huge variety of spares for efficient support and backup.
PROFILE Introduction Crown Combustion (Pty) Ltd. was founded in 2011. Together with our worldwide partners we have more than 150 years of collective experience in the Combustion Industry. Crown Combustion
More informationFrequently Asked Questions
Frequently Asked Questions 1. What is back-siphonage? Back-siphonage is the reversal of normal flow in a system caused by a negative pressure (vacuum or partial vacuum) in the supply piping. 2. What factors
More informationPrice List LT-WS0414 EFFECTIVE DATE: APRIL 1, 2014 SUPERSEDES JAN 31, 2011 PRICE LIST. It's all about performance
Price List LT-WS0414 APRIL 1, 2014 SUPERSEDES JAN 31, 2011 PRICE LIST It's all about performance Indexed Tabs Find the product you need quickly by referring to the color tabs on each page. BALL VALVES
More informationPlumbing. Definitions. Background Factors. Air Chambers. Air Gap (Drainage System) Air Gap (Water Distribution System) Air Lock.
Plumbing Plumbing may be defined as practice, materials, and fixtures used in the installation, maintenance, and alteration of all piping, fixtures, appliances, and appurtenances in connection with sanitary
More informationPRE-ASSEMBLED RADIANT CONTROL PANEL INSTALLATION MANUAL
FloorHeat PRE-ASSEMBLED RADIANT CONTROL PANEL INSTALLATION MANUAL Thank you for purchasing this radiant control panel assembly. Following are some important notes that will make the installation successful.
More informationBSD Technical Standard. Division 22: Plumbing
Division 22: Plumbing I. PURPOSE This technical standard is a narrative describing Beaverton School District s (BSD s) Basis of Design for mechanical plumbing systems. The information contained herein
More informationHVAC BASIC MATERIAL AND METHODS 1.01 RELATED CORNELL DESIGN AND CONSTRUCTION STANDARDS
230500 HVAC BASIC MATERIAL AND METHODS PART 1 GENERAL 1.01 RELATED CORNELL DESIGN AND CONSTRUCTION STANDARDS A. Section 230000 Basic HVAC Requirements B. Section 230523 Valves C. Section 230510 Chilled
More informationHEAT GENERATION 1.01 RELATED CORNELL DESIGN AND CONSTRUCTION STANDARDS. B. Section HVAC Basic Materials and Methods
230520 HEAT GENERATION Cornell s Design and Construction Standards provide mandatory design constraints and acceptable or required products for all construction at Cornell University. These standards are
More information1 Exam Prep Plumbing State Contractors Practice Exam 2
1 Exam Prep Plumbing State Contractors Practice Exam 2 1 According to Chapter 64E-6, when sizing a grease interceptor used in a restaurant, the correct formula is. A. (S) x (EW 12) x (LF) B. (S) x (GS)
More information2009 IRC. and Fuel gas Provisions
2009 IRC Q &A Plumbing, MechanICAl and Fuel gas Provisions TABLE OF CONTENTS PREFACE... vii ABOUT THE INTERNATIONAL CODE COUNCIL...viii PLUMBING PROVISIONS... 1 CHAPTER 25 PLUMBING ADMINISTRATION....3
More informationAN ORDINANCE TO AMEND CHAPTER 7-BUILDING REGULATIONS, ARTICLE 1-UNIFORM CONSTRUCTION CODE, SECTION 7-2 -FEES TO ESTABLISH A NEW FEE SCHEDULE
1. BUILDING FEES: 1 AN ORDINANCE TO AMEND CHAPTER 7-BUILDING REGULATIONS, ARTICLE 1-UNIFORM CONSTRUCTION CODE, SECTION 7-2 -FEES TO ESTABLISH A NEW FEE SCHEDULE ESTABLISHMENT OF FEES PURSUANT TO N.J.A.C.
More informationWARRANTY POLICY & RECOMMENDED MAINTENANCE
WARRANTY POLICY & RECOMMENDED MAINTENANCE WARRANTY POLICY The following information will explain the plumbing components and warranty coverage for the plumbing systems and fixtures in your new home. It
More information1 Exam Prep Plumber s Handbook Tabs and Highlights
1 Exam Prep Plumber s Handbook Tabs and Highlights These 1 Exam Prep Tabs are based on the Plumber s Handbook Revised 2006. Each Tabs sheet has five rows of tabs. Start with the first tab at the first
More informationENGINEERED PRODUCTS LINE CARD New England, Upstate New York, Western Pennsylvania & West Virginia
ENGINEERED PRODUCTS LINE CARD New England, Upstate New York, Western Pennsylvania & West Virginia ABS, associated with innovation and well-proven solutions for wastewater handling, is a product brand of
More information1. You are required to use a 20 foot ladder placed up against a building that is 40 high. At what
This practice exam will require you to have a calculator, pencil, scrap paper, a copy of the 2005 National Plumbing Code and will contain many similar questions as the current Plumbing Red Seal trade certification.
More informationTABLE OF CONTENTS Limitations of Authority...6 Table Plumbing Permit Fees...7
TABLE OF CONTENTS CHAPTER 1 ADMINISTRATION.............1 101.0 General.......................1 101.1 Title..........................1 101.2 Scope........................1 101.3 Purpose......................1
More informationManufacturers Representatives Since Industrial Systems, Inc. Computer Support, Inc
Manufacturers Representatives Since 1974 Industrial Systems, Inc. Computer Support, Inc. www.industrialsystems.org 1-800-460-0469 210-493-4200 ENGINEERED PRODUCTS FOR THE ENGINEERED ENVIRONMENT Sewage
More informationC. B. Trading Corporation
+91-8048737256 C. B. Trading Corporation http://www.cbtc.in/ C. B. Trading Corporation is an eminent distributor and trader of a wide range of s, Pipe Fittings, Forged Carbon Steel and Water & Steam Flow
More informationAIRPORT PLUMBING DESIGN STANDARDS REV. 2 11/02/2015
1.1 GOALS The goal of this section is to provide guidance in the design of Plumbing and Fire Protection systems to LAWA standards. The LAWA Plumbing Design Standards are a compilation of general design
More informationICP Plumbing Exam. Name: Carefully read each question and then circle the letter of the best answer.
ICP Plumbing Exam Name: Date: Score: Carefully read each question and then circle the letter of the best answer. 1. A 1 inch diameter faucet, where the inside edge of the spout opening is 2.5 inches away
More informationCHAPTER VI BUILDING PLUMBING
CHAPTER VI BUILDING PLUMBING 6.1. INTRODUCTION The chapter covers questions related to water demand, distribution and drainage. The basic principles for planning and installing common plumbing systems
More informationASME STANDARDS IN MODEL CODES
STANDARDS IN MODEL CODES ASME Name Model Code With Year of Referenced IPC IRC UPC 2009 NSPC A112.1.2 Air Gaps in Plumbing 2004 2004 2004 2004 A112.1.3 Air Gap Fittings For Use With Plumbing, Appliances
More informationAIRPORT PLUMBING DESIGN STANDARDS REV. 3 3/18/2016
1.1 GOALS The goal of this section is to provide guidance in the design of Plumbing and Fire Protection systems to LAWA standards. The LAWA Plumbing Design Standards are a compilation of general design
More information21. Plumbing fixture mixing valves, PRV, electronic faucets and flush valve(excluding batteries)optional Cost proposal to include these device
DIVISION 23800 APPENDIX A ASHTABULA CAMPUS: 1. Air Handling Equipment And Appurtenances 2. Exhaust Fans 3. Fume Hood Exhaust Fans 4. Fume Hood monitoring devices and annual certification of face velocity
More informationClean. Safe. Reliable. WaterPEX.
Clean. Safe. Reliable. WaterPEX. Our Complete System of Pipes, Valves, and Fittings for Plumbing is Even More Comprehensive The future of plumbing systems is WaterPEX. W ith 125 years of experience, Watts
More informationPLUMBING CURRICULA OUTLINE
PLUMBING CURRICULA OUTLINE CORE CURRICULUM 2015 Basic Safety (Construction Site Safety Orientation) (12.5 Hours) (Module ID 00101-15) Presents basic jobsite safety information to prepare workers for the
More informationTABLE OF CONTENTS. CHAPTER 2 DEFINITIONS General Applicability Definition of Terms General...
TABLE OF CONTENTS CHAPTER 1 ADMINISTRATION..............1 101.0 General.......................1 101.1 Title..........................1 101.2 Scope........................1 101.3 Purpose......................1
More informationS AGE E NGINEERING A SSOCIATES, LLP
S AGE E NGINEERING A SSOCIATES, LLP 1211 Western Avenue Albany, NY (518) 453 6091 F (518) 453 6092 Kingston Library Mechanical and Electrical Systems Field Report Date of Visits: Mechanical - September
More informationPlumbing Technology/Plumber CIP Task Grid
1 Secondary Task List 100 DEMONSTRATE PERSONAL SAFETY IN THE TRAINING LABORATORY 101 Follow rules for fire safety. 102 Follow rules for housekeeping safety. 103 Follow shop rules. 104 Follow rules for
More informationCh. 11 Plumbing Systems
Water Supply Potable Water: water suitable for human drinking Nonpotable: use for irrigation, flushing toilets, and the like Surface water comes from rain and snow that runs off into rivers and lakes.
More informationDomestic Hot Water Systems and Plumbing Products
Domestic Hot Systems and Plumbing Products Taco Catalog #100-117 Effective Date: 09/02/15 Supersedes: 06/22/15 Printed in USA Domestic Hot Recirculation Taco Domestic Hot Plumbing Products Since 1920 Taco
More informationRead Only Document Not For Distribution
Chapter 14 Special Requirements For Health Care Facilities 14.1 GENERAL This Chapter applies to special fixtures and systems that occur in health care facilities and to the special plumbing requirements
More informationPerkins Statewide Articulation Agreement. Documentation item: Secondary Competency Task List Coversheet
Perkins Statewide Articulation Agreement Documentation item: Secondary Task List Coversheet The Secondary School agrees to: A. Implement the approved PDE Program(s) of Study. B. Provide assessment of student
More informationPERFORMANCE TECHNICAL SPECIFICATION *************************************************************************** SECTION D20 PLUMBING 02/18
NAVFAC PTS-D20 (February 2018) ------------------------------ Preparing Activity: NAVFAC SUPERSEDING PTS-D20 (September 2016) PERFORMANCE TECHNICAL SPECIFICATION SECTION D20 PLUMBING 02/18 NOTE: This section
More informationLevel I Chapter 1 Worksheet
Chapter 1 Worksheet 1. For applicability requirements of the Plumbing Code, refer to: a. Building Code b. Administration and Enforcement Code c. Plumbing Code d. Residential Code 2. The provisions of the
More informationSpecial Requirements For Health Care Facilities
Chapter 14 Special Requirements For Health Care Facilities 14.1 GENERAL This Chapter applies to special fixtures and systems that occur in health care facilities and to the special plumbing requirements
More information2009 IPC ,IMC Q &A ANDIFGC
2009 IPC,IMC ANDIFGC Q &A TABLE OF CONTENTS PREFACE.... ix ABOUT THE INTERNATIONAL CODE COUNCIL...x IPC CHAPTER 1 SCOPE AND ADMINISTRATION...1 Section 101 General... 1 Section 102 Applicability... 1 Section
More informationState College Area School District High School North Building EXISTING CONDITIONS ASSESSMENT
State College Area School District High School North Building Prepared by CenterPoint Engineering 08 February 2013 FACILITY ASSESSMENT SUMMARY PHYSICAL PLANT General HVAC This report is a snapshot of the
More informationSTEAM AND CONDENSATE PIPING AND PUMPS DESIGN AND CONSTRUCTION STANDARD
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationCHAPTER 10 TRAPS AND INTERCEPTORS
CHAPTER 10 TRAPS AND INTERCEPTORS 1001.0 Traps Required. 1001.1 Each plumbing fixture, excepting those having integral traps or as permitted in Section 1001.2, shall be separately trapped by an approved
More informationTest Code: 8117 / Version 1
Pennsylvania Customized Assessment Blueprint Plumbing Technology/Plumber PA Test Code: 8117 / Version 1 Copyright 2012. All Rights Reserved. General Assessment Information Plumbing Technology/Plumber PA
More informationTighe&Bond. Groton Heights School Mechanical Evaluation. 1 Existing Conditions. 1.1 Water Service Entrance
Groton Heights School Mechanical Evaluation TO: FROM: Amy Vaillancourt, Project Manager Harley Langford, Project Manger Jason Curtis, P.E. DATE: February 24, 2016; Revised May 31, 2016 On Monday, December
More informationCONNECTICUT. Downloaded
Housekeeping/Laundry/Maintenance J. Laundry. CONNECTICUT Downloaded 01.15.11 (1) This service, if provided, shall be used exclusively for laundry and shall be remote from resident and food service areas,
More informationPlumbing: Hot Water Supply And Heating Systems By F. Hall READ ONLINE
Plumbing: Hot Water Supply And Heating Systems By F. Hall READ ONLINE If you are looking for the ebook by F. Hall Plumbing: Hot Water Supply and Heating Systems in pdf format, then you have come on to
More informationC. All components of the systems described shall meet the requirements as stated herein and shall be approved by the Architect and Consultant.
SECTION 218800 - FIRE PROTECTION 1. GENERAL A. Provisions of Division 1, GENERAL REQUIREMENTS, and Section 230000, MECHANICAL GENERAL CONDITIONS, and Section 230050, SEISMIC PROTECTION are a part of this
More informationState College Area School District High School South Building EXISTING CONDITIONS ASSESSMENT
State College Area School District High School South Building Prepared by CenterPoint Engineering 08 February 2013 FACILITY ASSESSMENT SUMMARY PHYSICAL PLANT General HVAC This report is a snapshot of the
More information4. Plumbing fixtures. a) The plumbing fixtures are from the original building. They are appear old and not to comply with ADA requirements.
From: Jian Zhang Sheet: 1 of 8 Date of Visit: 12/7/10 Coach House: Plumbing Systems b) All original building storm piping shows significant signs of aging. b) All original building sanitary piping shows
More informationTABLE OF CONTENTS I-1 INTRODUCTION TO STANDARD DESIGNS 03/17/08
TABLE OF CONTENTS Sheet Number Title Revision Date I-1 INTRODUCTION TO STANDARD DESIGNS 03/17/08 STREETS ST-1 LOCAL STREETS 03/17/08 ST-1A LOCAL STREETS, 2015 GENERAL PLAN 11/15/04 ST-2 COLLECTOR AND ARTERIAL
More informationINSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL ECO 18 ECO 24 ECO 27 IMPORTANT SAFETY INFORMATION
INSTALLATION INSTRUCTIONS & HOME OWNERS MANUAL ECO 18 ECO 24 ECO 27 IMPORTANT SAFETY INFORMATION As when installing or using any high voltage electrical appliance, basic safety precautions should always
More informationIndirect-Fired Water Heaters
Indirect-Fired Water Heaters Read important user safety information found on page 3, page 25 and page 26. Installation and service should only be performed by a qualified service technician. Retain this
More informationBACKFLOW PREVENTION GUIDE FOR COMMERCIAL, INSTITUTIONAL AND INDUSTRIAL DEVELOPMENTS
AG AVB PVB DCVA PA 1 Abattoir (slaughter house) 2 Air compressor oil cooler 3 Agricultural chemicals (sprayers 4 Animal watering 5 Apartment building (within the scope of Part 3 of the Ontario Building
More informationPartner. Peerless. Indirect-Fired. Water Heater. Installation, Operation & Maintenance Manual
Peerless Indirect-Fired Partner Water Heater Installation, Operation & Maintenance Manual Product Selection 1. The following guidelines apply to residential systems only. For commercial or institutional
More information2016 CDM Smith All Rights Reserved July 2016 SECTION PLUMBING - EQUIPMENT
PART 1 GENERAL 1.01 SCOPE OF WORK SECTION 22 30 00 PLUMBING - EQUIPMENT A. Furnish all labor and materials required and install the following Plumbing Equipment complete as specified herein and as shown
More informationERGOMAX 7 INSTALLATION
ERGOMAX 7 INSTALLATION INSTALLATION MUST CONFORM TO LOCAL CODES 1. WITH HYDRONIC BOILERS All ERGOMAX 7 units must be installed vertically. Adjustable feet for levelling are provided. PRESSURE RELIEF VALVE:
More information