TECHNICAL DATA SHEET. InJet 888 CRRD. PCB cleaning FILTERS OF REFLOW OVENS, SOLDERING FRAMES cleaning CHAMBER.

Transcription

1 PCB cleaning FILTES OF EFLOW OVENS, SOLDEING FAMES cleaning CHAMBE

2 TECHNICAL PAAMETES Dimensions (w x l x h) External rinsing set dimensions (w x l x h) Weight External 75 l tank for pre-rinsing Ø energy consumption per 1 cycle Cleaning fluid consumption per 1 cycle Compressed air consumption per 1 cycle Max. dimensions of the cleaned parts Exchangeable mechanical filter of cleaning fluid Exchangeable mechanical filter of rinsing fluid 1550 x 1500 x 1950 mm 1000 x 1500 x 1100 mm 780 kg 100 kg 3,3 kwh 0,2 0,5 l 3 l / 5 Bar 850 x 800 x 610 mm μm μm Operating pressures cleaning 1,5 Bar - 2,8 Bar rinsing 0,2 Bar - 0,7 Bar Cleaning fluid flow rate 210 l/min Temperature range setting of the cleaning fluid From ambient temperature to 60 C Temperature range setting of the rinse fluid From ambient temperature to 60 C Conductivity range settings of the rinse fluid μs/cm Temperature range setting of the drying From ambient temperature to 80 C Noise level Device control < 70 db PLC + 8,4 touchscreen INSTALLATION EQUIEMENTS Power supply Power connection Pmax Connection to central air pressure ecommended working pressure Exhaust pipe diameter 400 V, 50Hz (3+N+PE) EU 32 A 12 kw Pipe Ø 6 mm 5 Bar Ø 150 mm Exhaust pipe capacity 570 m 3 /h Volume of the storage tanks for cleaning Volume of the storage tanks for rinsing Service space required around the device 120 l 120 l + 75 l 600 mm

3 4 INDIVIDUAL POCESSES C CLEANING INSING PE-INSING D DYING D C CLEANING PAAMETES Application name ecommended application ecommended temperature ecommended time Capacty per shift PCB C 55 min. 1064* Filters of reflow ovens, soldering frames C 40 min. 240** * ** highly recommended eurocards (100x160 mm) per 8 hours (work shift) parts in soldering palette (350 x 500 x 50 mm) per 8 hours (work shift)

4 STANDAD EQUIPMENT 1 Process chamber, fully automatic solution PLC + 8,4" touchscreen Controlled rotation arms - 4 arm Lockable travelling wheels 100% Closed circuit Cleaning fluid heating insing fluid heating Hot air drying Emergency stop button Chimney flap with draft diverter Pneumatic door lock 2 Powerful hot air blowers Electronic monitoring of the fluid pressure High capacity stainless steel filter housing - DCT utility design 100% Stainless steel design - 15 years warranty: - Cleaning, rinsing and drying distribution - Process chamber - Storage tanks - Frame - Sheathing Easy removable sheathing Designed for easy maintenance and servicing Optimized stainless steel nozzles 75 L tank for pre-rinsing, closed circuit without filtration Spare parts (base kit) OPTIONAL ACCESSOY - MANUFACTUING PAT OF THE MACHINE Lowered upper rotation arm Fluid leakage tray - stainless steel Status light Acoustic signalization Barcode reader, including software continued on next page

5 Traceability offline (CD view SW) Traceability online OPC server SW for CVA calculation (installed on android platform or cleaning device) Common fluids draining - manual control Conductivity measurement - pre-rinse circuit Conductivity measurement - rinse circuit OPTIONAL ACCESSOY - NOT MANUFACTUING PAT OF THE MACHINE Mechanical carrier basket Chassis for carrier basket with protective grill Spare comb holder Manipulation trolley Mechanical carrier frame according customer specification Mechanical table holder for frames External pump for comfortable fluid refilling External pump manipulation trolley position for pump and 2 x 25 liter can 200 L tank for pre-rinsing - output into sewerage 25 L external filtration set 3 x 25 lit (1 x Active Carbon, 1 x mech. filter, 2 x Ionex, 1 x mech. filter) 60 L external filtration set 3 x 60 lit (1 x Active Carbon, 1 x mech. filter, 2 x Ionex, 1 x mech. filter) OPTIONAL ACCESSOY - INDIVIDUAL ODE OPC server setting - IT specialist service Automatic cleaning fluid refilling Automatic rinsing fluid refilling Automatic cleaning fluid discharging Automatic rinsing fluid discharging Other customized modifications

6 100% STAINLESS STEEL DESIGN AISI 304/ &3 YEAS WAANTY made in CZECH EPUBLIC Date of issue: May 2018 InJet is a registration trademark of DCT Czech s.r.o. For more information about you can contact DCT specialist in your country or the manufacturer directly. DCT Czech s.r.o., Tovární 85, Černá Hora, Czech republic info@dct.cleaning