High Performance Air to Water Heat Pump

Transcription

1 R410 High Performance ir to Water Pump ir to Water Pump Hz 11HM01E0

2 ir to Water Pump Mitsubishi Heavy Industries has integration of high technology in a variety of areas and provides comprehensive solutions for realization of a lowcarbon society. ir to water heat pump is one of our products supported by our unrivaled technology to realize utmost energy savings, safety and assurance. Our realized contributions to global environment Our contributions to a lowcarbon society encompass the entire product life cycle from efficient production, effective use of energy, effectual utilization of inexhaustible clean energy and recycling. This is a part of our accomplishments through unique technological features. Mitsubishi Heavy Industries provides total solutions to reduce environmental load in entire social infrastructure. ssured integration of high technology in a variety of areas Our product portfolio covering entire social infrastructure is supported by our proven high technology. We integrate proprietary technologies which have already demonstrated its significant capabilities in their own fields to augment its effects in our total solutions. Our air to water heat pump is an innovative system developed by such integration of high technology. Our assured integration of high technology is the mainstay of lowcarbon society. pump technology for lowcarbon society ir to water heat pump is a revolutionary energy recycling system which reduces environmental load by reusing heat energy produced in daily life. This firstrate energy saving system has been developed by our exceptional technology. Saving running cost with use of heat pump technology Typically less than 1 of output heat energy can be produced by conventional oil or gas boilers. pump technology is capable of producing up to 4.44 of heat energy from 1 of energy input making the system 4.44 times more efficient than traditional means. High pressure ~4.44 of heat 2

3 Product Information Radiator or an coil Water heat exchanger + storage unit loor ing Sanitary ooling ing Refrigerant Water pipe (for ir onditioning) Water pipe (for Sanitary) Sanitary ir water heat circulation system is an excellent energy recycling system. Our ir to Water Pump is a complete modern system for heating, cooling and producing hot sanitary water for houses, offering effective energy saving and reducing carbon dioxide emission. Our product is safe and economical with integrated hot water heater, iersion heater, circulating pump and climate system within the indoor unit. The heat energy is retrieved from the outdoor air through the outdoor unit, and is transferred to the indoor unit by the medium of refrigerant circulated in closed piping system. This eliminates the needs of bore holes and coils in the ground for conventional systems. pump technology system Our ir to Water Pump is a system that can offer heating, hot sanitary water and cooling. The mechanism of heat pump during heating can be simplified as follows. energy from the outdoor air Refrigerant exchanger (Outdoor) ompressor Expansion valve exchanger (Indoor) Hot water (8~6 ) Water supply irculation pump 1. The outdoor unit retrieves the heat energy from the outdoor air (heat source) and increases its temperature through compressing process by compressor. 2. The hot refrigerant (now in gas state) is routed to Indoor unit. 3. The refrigerant releases the heating energy to water for further distribution in the climate system. 4. The refrigerant (now in liquid state) is routed back to the outdoor unit and this process is repeated. y reversing the entire process for cooling, the refrigerant in this system retrieves the heat energy from water and releases it to outdoor air in accordance with heat pump theory. the indoor unit determines when the outdoor unit is to run or not to run by using the collated data from the temperature sensor. In the event of extra heat demands, the indoor unit can utilize additional heat in the form of the iersion heater, or any connected external addition. 3

4 3HP, 3.HP Outdoor unit DW71VNX Indoor unit eatures Energy saving Optimum annual operation costs thanks to the inverter driven compressor. The speed of the compressor is controlled according to the demand resuiting in the industries highest OP level of 4.08~4.44* in heating operation. ( : on page ) * Integrated design The compact size (0 x 6 footprint) has been achieved by intergrating the hot water tank for sanitary water use together with the water heat exchanger within the indoor unit (HMV1/V2 and HMVM1 only). Electrical and piping work is simpler due to the intergrated design. DWVNX Outdoor unit DW140VNX Tank unit HT HMV1/V2 HMVM1 Indoor unit HMS140V1/V2 6 hot water Max temperature flow line is 6 with the use of an auxiliary electric heater (as standard) used for hot water backup and to cope with irregular and excessive hot water demand. (8 with only use of compressor) External heating Possible to connect external heating sources including solar collectors. Refer to our installation manual for details. (except HT) Drain pan heater ondensate from the heat pump during heating operation (especially in cold regions) accumulates and freezes within the outdoor unit resulting in insufficient ombination with solar collectors heating capacity or damage to the heat exchanger. Our units have a drain pan heater included as standard preventing condensate from freezing and protecting the heat exchanger in cold conditions. Sterilization Various sterilization temperature settings according to the requirements of each country. Water supply pressure Water supply pressure at showers and faucets to second and third floors will not drop. y utilizing the direct incoming water supply and not using water from a storage tank water pressure and quality is maintained as well as the reduction in risk of legionella bacteria generation. (If a third party water storage tank is used there will be a reduction of water pressure at showers and faucets when they are used at the same time.) Silent mode Silent mode function can reduce the sound level from the outdoor unit in the heating mode by reducing compressor and fan speed. ON/O timer operation can be set with a remote control. Hot water MT0 MT0 Water supply 4

5 Specifications 3HP, 3.HP, Indoor unit Outdoor unit Power source ing Nominal capacity OP ooling Nominal capacity EER Tapping capacity Operation range (mbient temperature) Operation range (Water temperature) Max refrigerant pipe length Max height difference between IU and OU Height Width Depth Weight (without water in the system) Iersion heater Volume total Volume hot water coil Volume expansion vessel Dimensions, climate system pipe Dimensions, hot water pipe Water pipe connections Height Width Depth Weight Sound Power level* 1 Sound Power level(silent mode)* 1 Sound Pressure level* 2 Sound Pressure level(silent mode)* 2 irflow Drain pan heater Type of compressor Ref control Refrigerant volume (pipe length without additional charge) Dimensions, refrigerant pipe Ref pipe connections Indoor Unit Outdoor Unit 12/min 16/min heating cooling heating cooling m m kg kg d() d() d() d() m 3 /min W kg (m) (inches) 3HP HMV1 HMV2 HMVM1 DW71VNX 1 phase 2V Hz 3 phase 2V Hz 3 phase 400V Hz 8.0 (3.08.0) 8.3 (2.08.3) (2.07.1) 10.7 ( ) (+88 with valve cover) (1) 3.HP HMV1 HMV2 HMVM1 DWVNX 1 phase 2V Hz 3 phase 2V Hz 3 phase 400V Hz 9.0 (3.12.0) 9.2 (3.10.) (3.09.0) 11.0 ( ) (6 with iersion heater) (+20, adjustable feet) steps % ompression fittings (+80 with foot rail) Rotary EEV 2.9 (1) Gas pipe : OD 1.88 (/8"), Liquid pipe : OD 9.2 (3/8") lare Number in the end of model name in indoor unit (e.g. HMV1 or V2) shows available languaaes in the software. 1 : English, rench, Italian, German, zech, Swedish, Danish, Norwegian, innish, Dutch 2 : English, Latvian, Estonian, Lithuanian, Polish, Spanish, Portuguese, Turkish, Hungarian, Slovenian HMS140V1 HMS140V2 DW140VNX 1 phase 2V Hz 3 phase 400V Hz 16. (.816.) 16. ( ) (.216.) (+80 with foot rail) (1) Tank Unit (for HMS140V1/HMS140V2 only) Model Power source Volume Volume hot water coil 12/min Tapping capacity 16/min Iersion heater Height Width Depth Weight Dimensions, climate system pipe Dimensions, hot water pipe kg (inch) (inch) HT MT0 MT phase 2V / 3 phase 400V Hz steps 1880 (+20~4) (+20~) Test conditions ing ooling Tapping *1 : Test condition for sound power level Temperature condition : ing Water Temperature 4 out / 40 in 3 out / in 7 out / 12 in 18 out / 23 in 40 out / 1 in mbient Temperature 7 D / 6 W 3 D 7 D / 6 W *2 : Test condition for sound pressure level Temperature condition : ing MI position : 1m away in front of outdoor unit at the height of 1m

6 Dimensions Indoor unit 3HP, 3.HP (42) Tank for indoor unit () HT XL24 XL23 MT0 Ø MT0 0 XL4 XL24 0 XL XL XL8 XL9 XL Ø XL4 XL3 XL2 XL1 XL13 XL1 XL14 17 XL8 XL XL14 XL1 XL2 XL22 XL13 XL21 Mark XL1 XL2 XL3 XL4 XL13 XL14 XL21 XL22 Item 3HP/3.HP limate system supply limate system return old water Hot water Liquid line refrigerant Gas line refrigerant Tank circuit supply Tank circuit return /8" 28 3/8" /8" /8" XL9 2 8 XL23 XL24 XL3 XL4 QM1 VIEW 20~4 (adjustable) Mark XL3 XL4 XL8 XL9 XL23 XL24 Item old water Hot water External heat source in External heat source out irculation supply irculation return HT MT0 R1 int R1 int MT0 G1 int G1 int

7 Outdoor unit 3HP E 3.HP R D Terminal block 84 Terminal block E D (Ø20 x 3) VIEW Mark Item 3HP / 3.HP Terminal block Service valve connection (gas side) Service valve connection (liquid side) ø1.88(/8") (lare) ø9.2(3/8") (lare) Pipe/cable drawout hole 10 D E Drain discharge hole nchor bolt hole able drawout port ø20x3places M10x4places ø(front) ø.3x3places ø4(side) ø(back) E D Notes: (1) It must not be surrounded by walls on the four sides. (2) The unit must be fixed with anchor bolts. n anchor bolt must not protrude more than 1. (3) Where the unit is subject to strong winds, lay it in such a direction that the blower outlet faces perpendicularly to the dominant wind direction. (4) Leave 1m or more space above the unit. () wall in front of the blower outlet must not exceed the units height. (6) The model name label is attached on the lower right corner of the front panel. Minimum installation space 3HP Dimensions Examples of installation L1 L2 L3 L4 L2 Intake L Intake L4 Service space HP/ Dimensions Examples of installation L1 L2 L3 L4 L2 Intake L Intake 2 0 L VIEW L1 outlet L1 outlet Service space 7

8 ccessories V22 for HM V28 for HMS140 MHRG 10 Reversing valve for changing operation of cooling and heating Part No. MD291002(V22) MD29100(V28) Room sensor Part No. MD IP 4 4 T 110 lass H Ma x. 1 0 b a r K LE HE J S N DK 2 K22 for V22/ESV22 K28 for V28/ESV28 P,(W) 1m() Typ e UPS 2VHz 2.u 1 GRUNDOS P /N: P ; NI ESV22 for HM ESV28 for HMS140 K LE Extra mixing valve group for adjusting temperature in heating operation Part No. MD291003(ESV22) MD291006(ESV28) able kit Part No. MD291004(K22) MD291007(K28) efore starting use efore use Installation In order to get the greatest benefit from Our ir to Water Pump, read thoroughly the User s manual. Installation must be carried out in accordance with current norms and directives. urrent regulations require the inspection of installation before coissioning and the inspection must be carried out by suitable qualified personnel and should be documented. Improper installation will lead to water leakage, electric shocks, fires and other serious problems. Make sure that the indoor unit and the outdoor unit are stable in installation and fixed on stable base. Places Do not install in places where combustible gas could leak or where there are sparks. Keep away from places where combustible gas could be generated, flow or accumulate, or locations containing carbon fibers otherwise there is a danger of fire. Mitsubishi Heavy Industries, Ltd. ironditioning & Refrigeration Systems Headquarters 16, Konan 2chome, Minatoku, Tokyo, Japan ISO9001 ISO14001 Our ir onditioning & Refrigeration Systems Headquarters is an ISO9001 approved factory for residential air conditioners and coercialuse air conditioners (including heat pumps). Our ir onditioning & Refrigeration Systems Headquarters has been assessed and found to comply with the IWJIM PLNT requirements of Mitsubishi Heavy Industries, Ltd. irconditioning & Refrigeration Systems Headquarters ISO H9111HM01E0 IWJIM PLNT Mitsubishi Heavy Industries, Ltd. irconditioning & Refrigeration Systems Headquarters ertified ISO 9001 ertificate number : JQ0709 July 2011(1)R MITSUISHI HEVY INDUSTRIESMHJK IR ONDITIONERS O., LTD. ertified ISO 9001 ertificate Number : ertified ISO ertificate number : JQEM026 ISO ertificate E MITSUISHI HEVY INDUSTRIESMHJK IR ONDITIONERS O.,LTD. ertificate Number : E ecause of our policy of continuous improvement, we reserve right to make changes in all specifications without notice. Printed in Japan