High Performance Air to Water Heat Pump

Transcription

1 R High Performance ir to Water Pump ir to Water Pump Hz HM01E

2 ir to Water Pump Mitsubishi Heavy Industries has integration of high technology in a variety of areas and provides comprehensive solutions for realization of a low-carbon society. ir to water heat pump is one of our products supported by our unrivaled technology to realize utmost energy savings, safety and assurance. Our realized contributions to global environment Our contributions to a low-carbon society encompass the entire product life cycle from efficient production, effective use of energy, effectual utilization of inexhaustible clean energy and recycling. This is a part of our accomplishments through unique technological features. Mitsubishi Heavy Industries provides total solutions to reduce environmental load in entire social infrastructure. Efficient production Effective use of energy Solution for the realization of a low-carbon society Effectual utilization of inexhaustible clean energy Recycling ssured integration of high technology in a variety of areas Our product portfolio covering entire social infrastructure is supported by our proven high technology. We integrate proprietary technologies which have already demonstrated its significant capabilities in their own fields to augment its effects in our total solutions. Our air to water heat pump is an innovative system developed by such integration of high technology. Our assured integration of high technology is the mainstay of low-carbon society. Nuclear Power Generation Transportation system Gas Turbine ombined ycle power plant Smart Grid Our assured integration of high technology in a variety of areas Wind Turbine Generators Photovoltaic Power Generation Desalination Plant lternative uel pump pump technology for low-carbon society ir to water heat pump is a revolutionary energy recycling system which reduces environmental load by reusing heat energy produced in daily life. This first-rate energy saving system has been developed by our exceptional technology. Saving running cost with use of heat pump technology Typically less than 1 of output heat energy can be produced by conventional oil or gas boilers. pump technology is capable of producing up to 4.27 of heat energy from 1 of energy input making the system 4.27 times more efficient than traditional means. High pressure Outdoor Indoor 4.08~4.27 of heat pump 2 1

3 Product Information Water heat exchanger + storage unit Radiator or an coil loor ing Sanitary ooling Refrigerant Water pipe (for ir onditioning) Water pipe (for Sanitary) Our ir to Water Pump is a complete modern system for heating, cooling and producing hot sanitary water for houses, offering effective energy saving and reducing carbon dioxide emission. Our product is safe and economical with integrated hot water heater, iersion heater, circulating pump and climate system within the indoor unit. ing Sanitary ir - water heat circulation system is an excellent energy recycling system. The heat energy is retrieved from the outdoor air through the outdoor unit, and is transferred to the indoor unit by the medium of refrigerant circulated in closed piping system. This eliminates the needs of bore holes and coils in the ground for conventional systems. pump technology system 1 Refrigerant Our ir to Water Pump is a system that can offer heating, hot sanitary water and cooling. The mechanism of heat pump during heating can be simplified as follows. 2 ompressor Hot water (8~6 ) 3 energy from the outdoor air exchanger (Outdoor) exchanger (Indoor) Water supply 4 Expansion valve irculation pump 1. The outdoor unit retrieves the heat energy from the outdoor air (heat source) and increases its temperature through compressing process by compressor. 2. The hot refrigerant (now in gas state) is routed to Indoor unit. 3. The refrigerant releases the heating energy to water for further distribution in the climate system. 4. The refrigerant (now in liquid state) is routed back to the outdoor unit and this process is repeated. y reversing the entire process for cooling, the refrigerant in this system retrieves the heat energy from water and releases it to outdoor air in accordance with heat pump theory. the indoor unit determines when the outdoor unit is to run or not to run by using the collated data from the temperature sensor. In the event of extra heat demands, the indoor unit can utilize additional heat in the form of the iersion heater, or any connected external addition. 3

4 3HP, 3.HP Outdoor unit Indoor unit eatures Energy saving Optimum annual operation costs thanks to the inverter driven compressor. The speed of the compressor is controlled according to the demand resuiting in the industries highest OP level of 4.08~4.27* in heating operation. * ( : on page ) Integrated design DW71VNX- The compact size (0 x 6 footprint) has been achieved by intergrating the hot water tank for sanitary water use together with the water heat exchanger within the indoor unit (HMV1/V2 and HMVM1 only). Electrical and piping work is simpler due to the intergrated design. 6 hot water DWVNX- HMV1/V2 HMVM1 Max temperature flow line is 6 with the use of an auxiliary electric heater (as standard) used for hot water back-up and to cope with irregular and excessive hot water demand. (8 with only use of compressor) External heating 6HP Possible to connect external heating sources including solar collectors. Refer to our installation manual for details. Outdoor unit Indoor unit (except HT) Drain pan heater ondensate from the heat pump during heating ombination with solar collectors operation (especially in cold regions) accumulates and freezes within the outdoor unit resulting in insufficient heating capacity or damage to the heat exchanger. Our units have a drain pan heater included as standard preventing condensate from freezing and protecting the heat exchanger in cold conditions. DW1VNX- HMS1V1/V2 HMS1V1/V2 Tank unit Sterilization Various sterilization temperature settings according to the requirements of each country. Water supply pressure Water supply pressure at showers and faucets to second and third floors will not drop. y utilizing the direct incoming water supply and not using water from a storage tank water pressure and quality is maintained as well as the reduction in risk of legionella bacteria generation. HT (If a third party water storage tank is used there will be a reduction of water pressure at showers and faucets when they are used at the same time.) Silent mode Silent mode function can reduce the sound level from the outdoor unit in the heating mode by reducing compressor and fan speed. ON/O timer operation can be set with a remote control. MT0 4 MT0 Hot water Water supply

5 Specifications HMV1 HMV2 Indoor Model Power source OP ooling Nominal capacity EER HMVM1 DW71VNX- Outdoor Model ing Nominal capacity 3HP 12/min 16/min 1 phase 2V Hz/ 3 phase 2V Hz 3 phase 0V Hz 8.0 ( ) 8.3 ( ) ( ) 10.7 ( ) HMV1 HMV2 3.HP 6HP HMVM1 DWVNX- 1 phase 2V Hz/ 3 phase 2V Hz 3 phase 0V Hz 9.0 ( ) 9.2 ( ) ( ) 11.0 ( ) * (6 with iersion heater) ,7 (+20 -, adjustable feet) steps + % ompression fittings (+67 with valve cover) 370 (+80 with foot rail) Rotary EEV HMS1V1 HMS1V1 HMS1V2 HMS1V2 DW1VNX- 1 phase 2V Hz/ 3 phase 0V Hz 16.0 ( ) 16.0 ( ) ( ) 16. (.2-16.) Operation range heating (mbient temperature) cooling Operation range heating (Water temperature) 18-2 cooling Max refrigerant pipe length m Max height difference between IU and OU m Height 1,004 Width 13 Depth 3 Weight (without water in the system) kg Iersion heater Volume total Volume hot water coil Volume expansion vessel 18 Dimensions, climate system pipe 28 Dimensions, hot water pipe Water pipe connections Height 1,0 Width 970 Depth 370 (+80 with foot rail) Weight 10 kg Sound Power level*2 71 d() Sound Pressure level*2 4 d() irflow m3/min Type of compressor Ref control Refrigerant volume 2.9 (12) kg (m) 2. () 4.0 () (pipe length without additional charge) Gas pipe: OD.88 (/8"), Liquid pipe: OD 9.2 (3/8") Dimensions, refrigerant pipe (inches) rare Ref pipe connections *1 ccording to the outdoor air temperature and installation condition, it is required to use wind guard for outdoor unit. Refer to Technical manual for details. *2 Test condition for sound pressure level Temperature condition: ing MI position: 1m away in front of outdoor unit at the height of 1m Outdoor Unit Indoor Unit Tapping capacity Tank Unit (for HMS1V1/V2, HMS1V1/V2 only) Model Power source Volume Volume hot water coil 12/min Tapping capacity 16/min Iersion heater Height Width Depth Weight kg Dimensions, climate system pipe (inch) Dimensions, hot water pipe (inch) HT MT0 MT0 1phase 2V / 3phase 0V Hz steps 38 1,880 (+20~4) 1,69 (+20~) (1") 2.4(1") Test conditions ooling Tapping ing Water Temperature 4 out / in 3 out / in 7 out / 12 in 18 out / 23 in out / in mbient Temperature 7 D / 6 W 3 D 7 D / 6 W Specification table ased on European regulations listed below, please refer to the following specification table. Seasonal Space ing Energy Efficiency lass (W/W3) Water ing Energy Efficiency lass No 813/2013 of 2 ugust 2013 Ecodesign requirements for space Seasonal Space ing Energy Efficiency, % (W/W3) heaters and combination heaters. Water ing Energy Efficiency, % No 811/2013 of 18 ebruary 2013 Energy labelling of space heaters, Seasonal Space ing Energy Efficiency lass of package (W/W3) *2 combination heaters, packages of space heater, temperature control Seasonal Space ing Energy Efficiency of package (W/W3) *2 and solar device and packages of combination heater, temperature (ll are average climate condition) control and solar device. *1 In case of using MT0/MT0 *2 In case of including temperature control MH-RG10 3HP + / + 119/ / /3 3.HP ++ / / / ++ 1/169 6HP ++ / ++ / *1 133/166 94/ 108 *1 ++ / /170

6 Dimensions Indoor unit HMV1/V2, VM1(3HP, 3.HP) 18 HMS1V1/V2, 1V1/V2(6HP) (42) XL2 XL1 XL13 XL XL14 1 XL XL Mark Item 3HP/3.HP 6HP XL1 limate system supply XL XL9 22 XL4 Hot water XL13 Liquid line refrigerant 3/8" 3/8" XL14 Gas line refrigerant /8" XL21 Tank circuit supply XL2 XL22 XL14 XL1 XL13 XL XL3 old water XL22 Tank circuit return /8" 28 0 Tank for indoor unit (6HP) HT MT0 XL23 Ø XL24 XL2 limate system return XL Ø668 XL9 Mark Item XL3 old water 2 8 XL4 Hot water XL8 External heat source in 6 20~4 VIEW (adjustable) XL23 XL24 XL3 XL4 QM1 XL9 External heat source out HT MT0 MT0 G1 ext.(1") G1 ext.(1") G1 ext.(1") G1 ext.(1") R1 int R1 int G1 int G1 int XL23 irculation supply G1 ext.(1") G1 ext.(1") 28 XL24 irculation return G1 ext.(1") G1 ext.(1") XL9 XL23 XL XL XL8 169 XL24 0 MT0

7 Outdoor unit DW71VNX-(3HP) E 2. R Terminal block D 1 1 Terminal block DWVNX-(3.HP) E D (Ø20 x 3) DW1VNX-(6HP) 41 9 VIEW Terminal block 10 E Service valve connection (liquid side) Pipe/cable draw-out hole D Drain discharge hole ø20x3places E nchor bolt hole M10x4places able draw-out port ø.3x3places Minimum installation space 3.HP/6HP 1 Intake Intake 9 67 L1 VIEW 2 3 Open Open Open L2 41 ø(front) ø4(side) ø(back) Notes: (1) It must not be surrounded by walls on the four sides. (2) The unit must be fixed with anchor bolts. n anchor bolt must not protrude more than. (3) Where the unit is subject to strong winds, lay it in such a direction that the blower outlet faces perpendicularly to the dominant wind direction. (4) Leave 1m or more space above the unit. () wall in front of the blower outlet must not exceed the units height. (6) The model name label is attached on the lower right corner of the front panel. L3 70 D ø9.2(3/8") (lare) L1 L2 L3 L ø.88(/8") (lare) Dimensions Service valve connection (gas side) Examples of installation 6HP Item 3HP HP / 3.HP Mark outlet L4 Service space Examples of installation Dimensions L1 L2 L3 L4 L Open Open 0 0 Open L3 Intake L4 Intake L1 outlet Service space 7

8 ccessories V22 for HM V28 for HMS1 MH-RG10 Reversing valve for changing operation of cooling and heating Part No. MD292(V22) MD29(V28) Room sensor Part No. MD291 IP 4 4 T lass H Ma x. 1 0 b a r DK 2-1 GRUNDOS K LE P,(W) 1m() Typ e UPS 2VHz 2.u K22 for V22/ESV22 K28 for V28/ESV28 HE J S N P /N: P ; NI ESV22 for HM ESV28 for HMS1 K LE Extra mixing valve group for adjusting temperature in heating operation Part No. MD293(ESV22) MD296(ESV28) able kit Part No. MD294(K22) MD297(K28) efore starting use efore use Installation In order to get the greatest benefit from Our ir to Water Pump, read thoroughly the User s manual. Installation must be carried out in accordance with current norms and directives. urrent regulations require the inspection of installation before coissioning and the inspection must be carried out by suitable qualified personnel and should be documented. Improper installation will lead to water leakage, electric shocks, fires and other serious problems. Make sure that the indoor unit and the outdoor unit are stable in installation and fixed on stable base. Places Do not install in places where combustible gas could leak or where there are sparks. Keep away from places where combustible gas could be generated, flow or accumulate, or locations containing carbon fibers otherwise there is a danger of fire. Mitsubishi Heavy Industries, Ltd. ir-onditioning & Refrigeration Systems Headquarters 16-, Konan 2-chome, Minato-ku, Tokyo, Japan ISO9001 ISO101 Our ir onditioning & Refrigeration Systems Headquarters is an ISO9001 approved factory for residential air conditioners and coercial-use air conditioners (including heat pumps). Our ir onditioning & Refrigeration Systems Headquarters has been assessed and found to comply with the requirements of ISO101. HM01E IWJIM PLNT Mitsubishi Heavy Industries, Ltd. ir-conditioning & Refrigeration Systems Headquarters ertified ISO 9001 ertificate Number : JQ-0709 September 20 MITSUISHI HEVY INDUSTRIESMHJK IR ONDITIONERS O., LTD. ertified ISO 9001 ertificate Number : ISO 101 ertificate E IWJIM PLNT Mitsubishi Heavy Industries, Ltd. ir-conditioning & Refrigeration Systems Headquarters ertificate Number : YK03622 MITSUISHI HEVY INDUSTRIESMHJK IR ONDITIONERS O.,LTD. ertificate Number : E ecause of our policy of continuous improvement, we reserve right to make changes in all specifications without notice. Edited in Japan