BCF2150 FORWARD PLATE COMPACTOR PARTS BOOK

Transcription

1 BARTELL MORRISON INC. 375 Annagem Blvd., Mississauga, ON L5T 3A7 Telephone: Fax: BCF2150 FORWARD PLATE COMPACTOR PARTS BOOK Doc. # PB-B19019 Orig. Rel. 10/2013 Curr Rev. - 05

2 REV. DATE DESCRIPTION APPROVED BY: 00 10/2013 Initial release AL 01 01/2014 Cover photo updated AL 02 02/2014 Part number updated AL 03 06/2014 Address update AL 04 07/2014 Cover page update AL 05 07/2017 Part numbers updated, Address update, Format Update AN 1

3 Bartell Morrison Inc. 375 Annagem Boulevard Mississauga, Ontario, Canada L5T 3A7 Tel: (647) Fax: (647) SPE International Ltd Honeyholes Lane Dunholme, Lincoln, England LN2 3SU Tel: Fax: Bartell Morrison USA LLC 200 Commerce Drive, Unit A Freehold, NJ, USA Tel: (848) Fax: (848) Innovatech 4701 Allmond Ave Louisville, Kentucky, USA Tel: (425) Fax: (425) ORIGINAL LANGUAGE 2016 Bartell Morrison Inc. No part of this work may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or by any information storage or retrieval system without the prior written permission of Bartell Morrison Inc. unless such copying is permitted by federal copyright laws. Address inquiries or reference permissions care of: Bartell Morrison Inc., 375 Annagem Blvd., Mississauga, Ontario, Canada, L5T 3A7 2

4 TABLE OF CONTENTS PARTS LIST 1 FORWARD PLATE COMPACTORS 4 VIBRATOR: BCF GENERAL ASSEMBLY: BCF2150 PARTS LIST 1 5 PARTS LIST 2 FORWARD PLATE COMPACTORS 6 BODY: BCF BODY: BCF2150 PARTS LIST 2 7 PARTS LIST 3 FORWARD PLATE COMPACTORS 8 WATER TANK ASSEMBLY: BCF WATER TANK ASSEMBLY: BCF2150 PARTS LIST 3 10 PARTS LIST 4 FORWARD PLATE COMPACTORS 11 WHEELS: BCF WHEELS: BCF2150 PARTS LIST 4 12 DECLARATION OF CONFORMITY 13 3

5 PARTS LIST 1 FORWARD PLATE COMPACTORS VIBRATOR: BCF2150 4

6 GENERAL ASSEMBLY: BCF2150 PARTS LIST 1 Item # Part # Description QTY Remarks A CPC-95H-A VIBRATOR ASSEMBLY 1 1 CPC-95-01A VIBRATING CASE 1 2 CPC-95-02A BOLT M10x20T 1 3 CPC-95-03A PACKING 1 4 CPC-95-04A BOLT m16x45t 4 5 CPC-95-05A SW M CPC-95-06A PW M CPC-95H-07A VIBRATOR 1 8 CPC-95H-08A BEARING CPC-95-09A CASE RIGHT COVER 1 10 CPC A CASE LEFT COVER 1 11 CPC A BELT COVER GUARD 1 12 CPC A OIL SEAL 35x48x CPC A O-RING 100 (OD) x CPC A BOLT M8x25T 8 15 CPC A WASHER AND SW M CPC A PULLEY 1 17 CPC A KEY 7x7x CPC A WASHER M10 x 4 x 40(OD) 1 19 CPC A BOLT M10x25T 1 20 CPC A SW M10 1 5

7 PARTS LIST 2 FORWARD PLATE COMPACTORS BODY: BCF2150 6

8 BODY: BCF2150 PARTS LIST 2 Item # Part # Description QTY Remarks 21 CPC-95H-1B VIBRATING PLATE 1 22 CPC-95-2B SHOCK ABSORBER 4 23 CPC-95-3B NUT M CPC-95-4B SW M CPC-95H-5B BASE 1 26 CPC-95-6B BOLT M10x30T 4 27 CPC-95-7B SW M CPC-95-8B ENGINE 1 29 CPC-95-9B BOLT M8 x 55T 4 30 CPC-95-10B SW M CPC-95-11B PW M CPC-95-12B ENGINE NUT 1 33 CPC-95-13B ENGINE NUT 1 34 CPC-95-14B PW M CPC-95-15B NYLON NUT M CPC-95-16B CLUTCH ASSEMBLY 1 37 CPC-95-17B KEY 1 38 CPC-95-18B WASHER 1 39 CPC-95-19B SOCKET HEAD BOLT 1 40 CPC-95-20B V-BELT 1 41 CPC-95-21B BASE FOR BELT 1 42 CPC-95-22B BELT COVER 1 43 CPC-95-23B BOLT M8x35T 3 44 CPC-95-24B SW M CPC-95-25B PW M CPC-95-26B BOLT M8 x 20T 2 47 CPC-95-27B THROTTLE ASSEMBLY 1 48 CPC-95-28B HANDLE 1 49 CPC-95-29B COLLAR CPC-95-30B RUBBER 20 x 32 x CPC-95-31B HANDLE STOPPER 2 52 CPC-95-32B WASHER 12.5 x 35 x CPC-95-33B BOLT M12 x 75T 2 54 CPC-95-34B SW M CPC-95-35B BOLT M10 x 25T 4 56 CPC-95-36B SW M CPC-95-37B GUARD HOOK 1 7

9 58 CPC-95-27B THROTTLE LEVER WITH CABLE HANDLE STOPS (NOT SHOWN) 2 PARTS LIST 3 FORWARD PLATE COMPACTORS WATER TANK ASSEMBLY: BCF2150 8

10 9

11 WATER TANK ASSEMBLY: BCF2150 PARTS LIST 3 Item # Part # Description QTY Remarks 58 CPC-95-1C WATER TANK ASSEMBLY 1 59 CPC C CAP, WATER TANK 1 60 CPC C BOLT M10 x CPC C WASHER 10.5 x 21 x CPC C NYLON NUT M CPC-95-2C WASHER 14.1 x 30 x CPC-95-3C PACKING 13 x 28 x CPC-95-4C COCK 1 66 CPC-95-5C SPRINKLING PIPE 1 67 CPC-95-6C PIPE HOLDER LEFT 1 68 CPC-95-7C PIPE HOLDER RIGHT 1 69 CPC-95-8C FLANGE BOLT M8 x CPC-95-9C STAY, PIPE HOLDER 1 10

12 PARTS LIST 4 FORWARD PLATE COMPACTORS WHEELS: BCF

13 WHEELS: BCF2150 PARTS LIST 4 Item # Part # Description QTY Remarks 1 CPC-95-01D WHEELS FRAME CPC D WHEELS FRAME CPC D SHAFT 1 4 CPC D COLLAR 2 5 CPC D WHEELS 2 6 CPC-95-06D WASHER M CPC-95-07D CIRCLIP M

14 DECLARATION OF CONFORMITY CERTIFICAT DE CONFORMITÉ / GELIJKVORMIGHEIDS CERTIFICAAT / DECLARACIÓN DE CONFORMIDAD / DECLARAÇÃO DE CONFORMIDADE / DICHIARAZIONE DI CONFORMITA We: Bartell Morrison Inc. 375 Annagem Boulevard Mississauga, Ontario, Canada L5T 3A7 Tel: (905) Toll Free: (866) Fax: (905) Bartell Morrison USA LLC 200 Commerce Drive, Unit A Freehold, NJ, USA Tel: (732) Toll Free: (888) Fax: (732) Declare under our sole responsibility that the product to which this declaration relates is in conformity with the following standard(s) or other normative documents. Déclarons sous notre responsabilité que le produit cette déclaration est conforme aux normes suivantes ou d autres documents habituels. Verklaren onder onze verantwoordelijkheid dat het product naar welke de verklaring verwijst conform de volgende standaards of anders gebruikelijke documenten is. Declaramos bajo nuestra única responsabilidad que el producto en lo que esta declaración concierne, es conforme con la siguiente normativa u otros documentos. Declara sob sua responsabilidade que o produto a quem esta declaração interessar, está em comformidade com os seguintes documentos legais ou normas directivas. Dichiariamo sotto la ns. unica responsibilita che il prodotto al quale questa dichiarazione si riferisce, è fabbricato in conformità ai seguenti standard e documenti di normative. EN 349:1993 EN 418:1993 EN :2003 EN :2003 EN ISO 4872:1978 EN ISO :2001 EN ISO :2001 Safety of Machinery - Minimum gaps to avoid crushing of parts of the human body. Safety of Machinery - Emergency stop equipment, functional aspects - Principles for design Safety of Machinery - Basic Concepts, general principles for design - Part 1: Basic Terminology, methodology Safety of Machinery - Basic Concepts, general principles for design - Part 2: Technical Principles Acoustics - Measurement of Airborne noise emitted by construction equipment intended for outdoor use - Method for determining compliance with noise limits. Mechanical vibration. Measurement and evaluation of human exposure to handtransmitted vibration. General requirements Mechanical vibration. Measurement and assessment of human exposure to handtransmitted vibration. Practical guidance for measurement at the workplace. Following the provisions of Directive(s): Suivant les directive(s) déterminées: Volgens de vastgestelde richtlijnen: Siguiendo las directiva(s): No sequimento das clausulas da Directiva(s): Seguendo quanto indicato dalla Direttiva(s): 98/37/EC 2000/14/EC 2001/95/EC 2002/95/EC Machinery Directive Noise Directive General Product Safety Directive Reduction of Hazardous Waste Directive 13

15 Technical Characteristics: Caractéristiques techniques: Technisch gegevens: Características Técnicas: Caracteristicas Técnicas: Qualitàs di tecnico: Model Modéle Type Modelo Modelo Modello MachineSerial Number Numéro de Série machine Serienummer machine Máquina número de série Numero de serie da maquina Numero di seria la macchina Engine Serial Number Numéro de Série moteur Serienummer motor Motor número de série Numero de serie do motor Numero di seria la motore Weight Masse Gewicht Masa Massa Massa Lbs (kg) Noise Level Puissance acoustique Geluidniveau Nivel Sonoro Nivel del Ruido Potenza Acustica Lwa (db) Pressure level Pression acoustique Geluidsdrukniveau Nivel Acustico Pressão Acústica Pressione Acustica Lpa (Db) Vibration level Niveau de vibration Vibratieniveau Nivel de Vibracion Nivel de Vibração Livello di Vibrazione ahv (m/s 2 )

16 The Technical Construction file is maintained at: Les fiches techniques de construction sont gardées à: Het technische constructie document wordt bewaard te: El archivo técnico de construcción se mantiene en: O arquivo técnico de construção é mantido no (a): L originale dossier tecnico di construzione è conservato presso: The authorized representative is: Le représentant autorisé est: Gemachtigd vertegenwoordiger is: La representación autorizada es: O representante autorizado é: Il rappresentate autorizzato: Signature of Authorized Person: Signature de la personne autorisée: Handtekening van gemachtigd persoon: Firma de la persona autorizada: Assinatura de pessoa autorizada: Firma della persona autorizzata: Typed name of Authorized Person: Nom dactlyographié de la personne autorisée: Getypte naam van gemachtigd persoon: Nombre de la persona autorizada: Nome datilografado da pessoa autorizada: Nome della persona autorizzata: Title of Authorized Person: Titre de la personne autorisée: Functie van gemachtigd persoon: Cargo de la persona autorizada: Titulo da pessoa autorizada: Posizione della persona autorizzata: Date and place of issue: Date et place d émission: Datum en plaats van afgifte: Fecha y lugar de emision: Data e lugar de emissão: Bartell Morrison Inc. 375 Annagem Boulevard Mississauga, Ontario, Canada L5T 3A7 Tel: (905) Toll Free: (866) Fax: (905) Mr. Richard Stanley V.P. Operations Richard Stanley V.P. Operations Mississauga, Ontario, Canada 15

17 This Page Left Intentionally Blank 16

18 This Page Left Intentionally Blank 17

19 Bartell Morrison Inc. 375 Annagem Boulevard Mississauga, Ontario, Canada L5T 3A7 Tel: Fax: Bartell Morrison (USA) LLC 200 Commerce Drive, Unit A Freehold, New Jersey, USA Tel: Fax: Innovatech 4701 Allmond Ave Louisville, Kentucky, USA Tel: Fax: SPE International Honeyholes Lane Dunholme, Lincoln, UK LN2 3SU Tel: +44 (0) Fax: +44 (0)

20 1