VORT PROMETEO PLUS HR400 VENTILATION AIR CONDITIONING AIR CLEANING HEATING

Transcription

1 NEW VORT PROMETEO PLUS HR4 VENTILTION IR ONDITIONING IR LENING HETING TM 1

2 TM VORT PROMETEO PLUS RNGE HET REOVERY UNITS Product specifications: NEW 2 models: VORT PROMETEO PLUS HR 4 VORT PROMETEO PLUS HR 4 M. External asing in polypropylene (PPE). Heat Exchanger rossed ounter-flow type, made of PS (Polystyrene). Extremely high heat recovery rate (up to 92%). Electronically controlled E brushless motors independently adjustable. Max airflow 38 m 3 /h. 3 available speeds. utomatic frost protection. y-pass 1%. Horizontal and Vertical installation. Provided with 2 F5 filters (F7 optional)..5 m long silencer with nominal diameter of 15 mm supplied. 2 mounting brackets for vertical installation and 4 feet for horizontal installation supplied. Protection rate: IPX2. Insulation class: l.ii. VORT PROMETEO PLUS HR 4: RF remote control supplied. 2 operating modes: automatic and manual. utomatic y-pass. Option of setting the temperature, humidity and O 2 thresholds. Timer. VORT PROMETEO PLUS HR 4 M: 3 available speeds chosen through external device (speed selector supplied). Manual y-pass. an be used in conjunction with Vortice ambient sensors. Marking omply with the following European Directives: 26/95/E Low Voltage Directive (LVD) 24/18/E Electromagnetic ompatibility Directive (EM) 26/42/E ccording to the following state-of-the-ar t Standards: Safety: EN , EN , EN , EN 62233, EN 6529 EM: EN , EN , EN , EN PERFORMNE: EN 38, EN

3 KEY FETURES Offers continuous ventilation of the home. Energy saving thanks to brushless motors. an be integrated into a residential home automation network (Modus). Software can be easily updated through US connection. The P is easily accessed by removing the bottom panel. Recommended application in residential buildings (such as small detached homes) up to 2 m 2 and commercial buildings. Horizontal or vertical installation facilitated by the minimal weight of the appliance (just 25 kg). Only for code FUNTIONS ND SUPPLIES VORT PROMETEO PLUS RNGE y-pass In ISOTHERML conditions (similar indoor and outdoor air temperatures) or where the outdoor temperature is close to desired indoor temperature, the y-pass valve can be activated automatically or manually, allowing fresh air to y-pass (the heat exchanger) for natural ventilation (FREE-OOLING). Frost protection (Defrosting) In situations where the outdoor air temperature and RH % cause ice forming on heat exchanger, the frost protection valve automatically opens to mix up fresh outside air with installation room milder air. Simultaneously changes motor speed via the electronic control makes the defrosting process quicker and more effi cient. In particularly harsh climates Vortice recommends the installation of 5 W, 12 W or 18 W in-duct pre-heaters, available as an optional accessories, each are automatically activated by the on-board electronics. Filter VORT PROMETEO PLUS RNGE is supplied with 2 F5 fi lters, for cleaning fresh and stale air fl ows. further optional F7 fi lter is available for additional fi ltering of the incoming air. n F5 fi lter box accessory is also available, for installation outside the machine. Filter effi ciency is monitored by the on-board electronics, providing visual and acoustic warnings via the RF remote control. 3

4 REGULTION ND ONTROL VORT PROMETEO PLUS MODEL Each Vort Prometeo Plus feature is controlled by the radio frequency (RF) remote control. The RF remote control with LD display featuring new integrated graphics can be used for the following purposes: Switching on/off. Selecting the appliance operating mode (Manual/utomatic). Easy initial setting of minimum and maximum speed (no need to directly operate the machine). Selecting one of the 3 speed settings. Selecting the y-pass function. Setting the Timer function (the product, working in Manual mode, will work at the maximum speed for: 1, 2, 3 or indefi nitely, automatically slowing down to min speed). onfi guring the automatic operating parameters: desired indoor temperature (for bypass management only) can be set by the user between +15 and +3 (each step 1 ); relative humidity can be set by the user between 4% and 9% (each step 5%); Max. O 2 air concentration in the room can be set by the user between 5 ppm and 3. ppm (at step of 5 ppm); O 2 level can be disabled. Viewing machine malfunction information. n additional radio frequency (RF) antenna, part code (22479) including a connection cable, is available as an option, and allows control Vort Prometeo Plus even if the position chosen for its installation is screened from radio waves. 4

5 FILTER SPEIFITIONS The air we breathe contains a huge number of potentially harmful particles, over 9% of them are smaller than 1 μm, for example: - Fine particles emitted by motor vehicles and heating systems. - Viruses. - acteria. it is very important to use air exchange systems with high-effi ciency fi lters, which capture most of these toxic particles. Mechanically controlled ventilation systems such as VORT PROMETEO PLUS heat recovery units fi lter air as it enters served ambients, protecting the health and wellbeing of people occupying the rooms served by the appliance. DON T FORGET: Over time, fi lters become clogged, leading to a greater pressure loss in the air circuit; the fi lters therefore require regular maintenance and should be replaced when they are no longer effective. Filters can be split into 2 main categories, based on their fi ltering effi ciency: - Type G: coarse filter - Type F: fine filter These categories are defi ned by European standard EN779. Within the two categories, a progressive number indicates the effi ciency level of the fi lter: the higher the number, the more effi cient the fi lter is at capturing particles, as you can see from the chart below. Filter Efficiency % G4 F5 F7 <.1 μm Virus.5 μm acteria 2.5 μm Fine dusts 5 μm Mold spores 1 μm Pollen Particle size F fi lters are the most effi cient at capturing small particles. 5

6 DIMENSIONS ØP L G M F E N O D I L I H H Models ode D E F G H I L M N O Ø P VORT PROMETEO PLUS HR VORT PROMETEO PLUS HR 4 M Dimensions (mm) TEHNIL DT Max irflow Max Pressure Models ode V ~ 5 Hz W m3 /h l/s mmh 2 O Pa Kg Max VORT PROMETEO PLUS HR VORT PROMETEO PLUS HR 4 M SOUND LEVELS* VORT PROMETEO PLUS RNGE RPM Lw d () 125 Hz 25 Hz 5 Hz 1 Hz 2 Hz 4 Hz 8 Hz Lw d () Supply to internal Extract from internal Lp d () 3m*** reakout na** Supply to internal Extract from internal reakout Supply to internal Extract from internal nd reakout Supply to internal Extract from internal reakout Supply to internal Extract from internal reakout Supply to internal Extract from internal reakout * Tests carried out using sound intensity measurement in a semi-anechoic chamber. ** Data not available. *** In free fi eld. 6

7 PERFORMNE URVES VORT PROMETEO PLUS HR 4 M POWER ONSUMPTION URVES VORT PROMETEO PLUS HR 4 M IRFLOW/PRESSURE URVES Power [W] p [mmh₂o] p [Pa] q [m³/h] q [l/s] q [m³/h] q [l/s] MX-max (335 RPM) MX def (37 RPM) MED def (233 RPM) MIN def (16 RPM) MIN-min (7 RPM) VORT PROMETEO PLUS HR 4 POWER ONSUMPTION URVES VORT PROMETEO PLUS HR 4 IRFLOW/PRESSURE URVES Power [W] p [mmh₂o] p [Pa] q [m³/h] q [l/s] EFFIIENY URVES q [m³/h] q [l/s] 335 RPM 3 RPM 265 RPM 21 RPM 16 RPM 7 RPM Test according to EN 38 TOTL EXHUST FLOW RTE (m 3 /h) HET REOVERY EFFIIENY (%) Test conditions: +5 /7%; +25 /28%. Data referred to test performed at RE according to RITISH SP-Q system 4 standard. Influence on efficiency due to condensation heat Efficiency(%) rendimento[%] Return-air aria ambiente +2 +2º airflow 15 m portata 15 3 /h 3 (42 l/s) /h (42 l/s) outside temperatura temperature esterna ( ) [º] return-air aria ambiente RH (%) UR ( ) (%) Efficiency(%) rendimento [%] aria Dry air secca [m 3/h] [l/s] Efficiency as a function of the airflow

8 ESSORIES Description ode Models TEMP-TEMPERTURE: Measures ambient room temperature, and starts the fan when the temperature exceeds the preset value. Once the temperature drops below the preset value, you can adjust the over-run timer from 3 to 2 minutes SMOKE: Measures the air quality, detecting the presence of cigarette smoke, odours and other pollutants, and starts the fan when the concentration of pollutants exceeds the preset value. You can adjust the over-run timer from 3 to 2 minutes HS-HUMIDITY: Measures ambient relative humidity. It starts the fan when the R.H. It incorporates an over-run timer (adjustable between 3 and 2 minutes) PIR- MOVEMENT DETETOR: Detects the presence of a moving body within its sensor range, and starts the fan automatically. You can adjust the over-run timer from 3 to 2 minutes TIMER: djustable over-run timer between 3 and 2 minutes DIMENSIONS (mm) ode Model TEMP SMOKE HS PIR TIMER If external room sensors are connected, specifi c wiring is required. 8

9 Description ode Models IR VLVE FOR EXTRTION: - Ø 8 - Ø UTOMTI IR INLET: E 15 L utomatic air inlet 15 m 3 /h E 3 L utomatic air inlet 3 m 3 /h UTOMTI OUSTI IR INLET: E22-L utomatic acoustic air inlet 22 m 3 /h E3-L utomatic acoustic air inlet 3 m 3 /h E4-L utomatic acoustic air inlet 45 m 3 /h DDITIONL SPIGOT: dditional spigot ONTROLS: External RF Receiver Module RF Remote ontroller White. n additional remote-controlled radiofrequency RF device including a connection cable is available as an optional accessory and allows control of the appliance even if the position chosen for its installation is shielded from radio waves SPEED REGULTOR: three-speed selector switch ELETRI HETER: When the temperature and relative humidity of air entering and leaving the Prometeo unit are such that frost may form on the heat exchanger surface, this can affect the effi ciency of the unit. It can also affect the completely automatic system in the VORT PROMETEO PLUS HR 4 and VORT PROMETEO PLUS HR 4 M that manages changes in fan speeds that, in the vast majority of cases, allow defrosting to be carried out. In particularly harsh climates, this may not solve the problem. In such cases, Vortice recommend the installation of a 5 W, 12 W or 18 W pre-heater on the air intake duct so that incoming air can be warmed. This heater will operate automatically for the minimum time needed and will ensure the problem of frosting is solved ode Model Ø D E F Weight [kg] Electric heater 5 W D F Electric heater 12 W E Electric heater 18 W

10 Description ode Models EXTERNL FILTER OX: F5 External Filter ox Galvanised fi lter box (F5) designed to simplify maintaining the VORT PROMETEO PLUS HR 4 and VORT PROMETEO PLUS HR 4 M. The fi lter box is fi tted to the outside of the appliance and protects the intake and outlet ducts serving various rooms (replacing standard fi lters). Time spent on maintenance is less (thanks to a specially sized fi lter that guarantees perfect fi ltering characteristics even when the unit is used for long periods), and maintenance work is simplifi ed as direct access to the Prometeo unit is not required FILTERS: F5 fi lter for VORT PROMETEO PLUS HR 4 and PROMETEO PLUS HR 4 M external fi lter box. F5 internal fi lter (single) for VORT PROMETEO PLUS HR 4 and PROMETEO PLUS HR 4 M. F7 internal fi lter (single) for VORT PROMETEO PLUS HR 4 and PROMETEO PLUS HR 4 M SREWDRIVER: Hexagonal screwdriver for maintenance NOISE TTENUTOR: - To be installed in the ventilation system, always after the fan, and/or the fi lter box/duct heater. - Useful when noise level required is particularly low. - Working temperature: Maximum working pressure: 2 Pa. - Maximum air speed: 25 m/s max. 6 6 ode Model Ø Ø Weight [kg] N 15 (Noise ttenuator) Flexible Silencer 15/ Flexible Silencer / KDRUGHT SHUTTER: - To be directly mounted in ventilation ducts or on fan outlet. D E - omposed by a cylinder in electro galvanized sheet steel calendered and welded. - losure and seal are ensured by a toroidal gasket in neoprene closed cell. ode Model Ø D Ø E Weight [kg] IN LINE-S GRVITY SHUTTER: - To be installed at the duct outlet on vertical wall. - Useful to avoid air return from the outside and to protect the product. - Totally manufactured from shockproof thermoplastic anti UV resin. - Flaps are shaped in order to avoid their block ode Model Ø D Nr flaps D GGR 15/

11 Description ode Models FIXED GRILLE: -To be mounted at the beginning or the end of a ventilation duct. - Totally manufactured from shockproof thermoplastic anti UV resin. D ode Model Ø D FG FG FG GRILLE KIT: - To be mounted at the beginning or the end of a ventilation duct. - Totally manufactured from shockproof thermoplastic anti UV resin. D ode Model Ø D 2214 D D D IR VLVE: - To be applied to plafond, ceilings, ventilation ducts, double-ceilings etc. - llow fl ow rate regulation with a simple adjustment of the rotating core. - White thermoplastic polystyrene. ode Model Ø Ø D V V V LUMINIUM FLEXILE DUT: - Ideal for ventilation and air conditioning, low noise and for high pressure. - Totally manufactured from aluminium. - Length 4 m (Ø 1 mm -15 mm) ode Model Ø FD FD FD INSULTED LUMINIUM FLEXILE DUT: - Ideal for ventilation and air conditioning, low heat dissipation, condensation, noise and for high pressure. - Totally manufactured from aluminium with internal thermal insulation by standard fi berglass (25 mm 16 kg/m 3 ). - Length 4 m (Ø 1 mm - 15 mm). ode Model Ø FD-I FD-I FD-I VORT PLENUM: - VORT PLENUM 6 +1: ir distribution box with inspection opening for air supply or extraction up to 6 rooms + kitchen. - VORT PLENUM 5 +1 R: ir distribution box with inspection opening for air extraction up to 5 rooms + kitchen

12 ode /12 Vortice Elettrosociali S.p. Strada erca, 2 Frazione di Zoate 267 Tribiano (Milano) Tel. (+39) Fax (+39) Italia export@vortice-italy.com Vortice France 15-33, Rue Le orbusier S réteil edex Tél. (+33) Fax (+33) France contact@vortice-france.com Vortice Limited eeches House-Eastern venue urton on Trent DE13 Tel. (+44) Fax (+44) United Kingdom sales@vortice.ltd.uk The description and illustrations in this catalogue are understood to be indicative and are not binding. Vortice reserves the right, while not changing the essential characteristcs of the models described and illustred, to modify products whenever necessary and without warning.