1. Field measurements must be taken to verify existing conditions prior to installation.

Size: px

Start display at page:

Download "1. Field measurements must be taken to verify existing conditions prior to installation."

Brendan Hancock
6 years ago
Views:

1 General Conditions: 1. Field measurements must be taken to verify existing conditions prior to installation. 2. Deliver and set in place all food service equipment as specified herein, including that which is reasonably inferred, with all related items necessary to complete work shown on contract drawings and/or required by these specifications. 3. All work and materials shall be in full accordance with Local and State ordinance and with any prevailing rules and regulations. 4. Equipment shall conform to latest standards of National Electric Manufacturers Association and of Underwriters Laboratories, Inc., and shall bear the U.L. label. 5. Items of food service equipment furnished shall conform to standards of National Sanitation Foundation, Ann Arbor, Michigan, and shall bear the N.S. F. seal. 6. Food service equipment shall be installed in accord with N.S.F. standards. 7. Work and materials shall be in compliance with requirements of applicable codes, ordinances and regulations, including but not limited to those of Occupational Safety and Health Act (OSHA), National Fire Protection Association, State Fire Marshall, State Accident Commission, U.S. Public Health Service, State Board of Health, local health codes, etc. 8. No extra charge will be paid for furnishing items required by regulations, even though such may not be shown on drawings or called for in these specifications. 9. Rulings and interpretations of enforcing agencies shall be considered part of regulations. 10. Warranty: All equipment to be warranted for one (1) year, parts and labor. However, manufacturer s warranty shall prevail when the period is longer than one year. 11. Train owner on use and maintenance of all equipment. 12. Submit shop drawings for Owner s approval. 13. Provide maintenance manuals. Page 1 of 6

2 ITEM 1 MILK CABINET QUANTITY AS SCHEDULED. Provide milk cabinet having the following features: A. Forced air B. 49 wide C. Single access D. Exterior digital thermostat E. (12) 13" x 13" x 11" or (8) 19" x 13" x 11" case capacity F. Stainless steel interior and exterior G. 7" heavy duty casters, (2) with brakes H. Cord and plug Milk cabinet to be by Beverage Air, Model SMF49Y-1-S, True, or Traulsen. ITEM 2 HOT FOOD COUNTER QUANTITY AS SCHEDULED Provide modular serving counter having the following features: B. Five individual hot food wells with pre-wired controls, voltage characteristics as scheduled. Wells to be dry\moist, with manifold and valve in accessible location. C. Counter Extension, 14", see plan D. 6 stainless steel adjustable legs. E. Solid V type tray slide, set at 30 inches high. F. Cord and plug set, Daisy chain to single point connection. G. Plastic laminate facing or powder coated panels, color to be as selected by Owner. H. Install in banked line-up as shown on drawings. I. Line-up locks. J. Counter to be 36 inches high. Page 2 of 6

3 K. Enclosed (sliding doors) understorage. L. Hooks on underside to hold cord off floor. M. 10 stainless steel fold-down work shelf Hot food counter to be by Colorpoint, Model EF5-CPA, or Duke. ITEM 3 SNEEZE GUARD QUANTITY AS SCHEDULED Provide fixed protector guard with the following features: A. 1" diameter tubular aluminum frame. B. 1/4" tempered glass panel front. C. 3/8 glass top panels. D. Glass corners on 1 radius. E. Size as indicated on plan and schedule. F. End panels where required. G. Designer finish frame and brackets as selected by owner. H. Counter mounting kit, as recommended by manufacturer. I. Fluorescent lighting Guard to be English, Model MA-112-2, or Versa-Guard, or BSI. ITEM 4 COLD FOOD COUNTER QUANTITY AS SCHEDULED Provide cold food counter having the following features: B. (1) 51"W x 20"D x 9" deep stainless steel cold well Sized as shown on plan. Design to comply with NSF standard No. 7. C. Drain with valve D. Reinforced stainless steel enclosed base C. Plastic laminate facing or powder coated panels, color to be as selected by Owner. B. 6 stainless steel adjustable legs Page 3 of 6

4 E. Counter to be 32 inches high. F. Solid V type tray slide, set at 30 inches high. G. Line-up lock. H. Install in banked line-up as shown on drawings. I. Hooks on underside to hold cord off floor. J. 10 stainless steel work shelf K. Counter to be modified to extend additional 14 inches, see plan Counter to be by Colorpoint, Model 60-CFMA, or Duke. ITEM 5 SNEEZE GUARD QUANTITY AS SCHEDULED Provide adjustable protector guard with the following features: A. 1" diameter tubular aluminum frame. B. 1/4" tempered glass panel front, fully adjustable angle brackets. C. 3/8 glass top panels. D. Glass corners on 1 radius. E. Size as indicated on plan and schedule. F. End panels where required. G. Designer finish frame and brackets as selected by owner. H. Counter mounting kit, as recommended by manufacturer. I. Fluorescent lighting Guard to be English, Model M-107-2, or Versa-Guard or BSI. ITEM 6 CASHIER COUNTER QUANTITY AS SCHEDULED Provide modular cashier counter having the following features: B. Plastic laminate facing or powder coated panels, color to be as selected by Owner. C. Two, 4 inch dia. Grommet hole in top for electrical cords. Page 4 of 6

5 D. Stainless steel undershelf. E. Convenience outlet under top. Daisy chain to single point connection. F. Stainless steel drawer, lockable. G. Solid V type tray slide, set at 30 inches high. H. 6 stainless steel adjustable legs I. Counter to be 36 inches high. J. Line-up lock. K. Install in banked line-up as shown on drawings. L. Hooks on underside to hold cord off floor. Cashier counter to be as manufactured by Colorpoint, Model 36-CSE, or Duke. ITEM 7 CASH REGISTER N.I.C. This item to be furnished by Owner. ITEM 8 CASHIER COUNTER QUANTITY AS SCHEDULED Provide modular cashier counter having the following features: B. Plastic laminate facing or powder coated panels, color to be as selected by Owner. C. Two, 4 inch dia. Grommet hole in top for electrical cords. D. Stainless steel undershelf. E. Convenience outlet under top. Daisy chain to single point connection. F. Stainless steel drawer, lockable. G. Solid V type tray slide, set at 30 inches high. H. 6 stainless steel adjustable legs I. Counter to be 36 inches high. J. Line-up lock. Page 5 of 6

6 K. Install in banked line-up as shown on drawings. L. Hooks on underside to hold cord off floor. Cashier counter to be as manufactured by Colorpoint, Model 28-CSS, or Duke. ITEM 9 2-TIER CERAMIC GLASS SHELF QUANTITY AS SCHEDULED Provide quickswitch 2-tier ceramic glass shelving serving counter having the following features: A. 50 W x 36 B. Glass to be ¼ thick and UL recognized C. 600 Watt silicone heat blanket to be attached to the underside of the glass with high temperature adhesive D. Unit to include two solid state digital controllers for hot operation and two lighted on/off rocker switch for cold operation E. Counter to be modified to extend additional 24 inches, see plan F. Voltage as scheduled, daisy chained to single point connection. Two tier quick switch serving counter to be as manufactured by Colorpoint, Model QSGT-42-2T- BI, or Duke. ITEM 10 REACH-IN REFRIGERATOR QUANTITY AS SCHEDULED Provide reach-in refrigerator having the following features: A. One section, glass door B. Stainless steel front, aluminum sides C. Clear coated aluminum interior with stainless steel floor D. (3) adjustable PVC-coated wire shelves E. LED interior lighting F. Casters G. Cord and plug Reach-in refrigerator to be as manufactured by True, Model T-23G-LD, Beverage Air, or Victory. Page 6 of 6

SERVING LINE EQUIPMENT AND UNITS

SECTION 11416 SERVING LINE EQUIPMENT AND UNITS PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 11401 - Custom Fabricated Equipment. 2. 11419 - Utility Distribution Systems. 3. Division 15 - Water supply,