Perforating/Creasing/Cutting Rule Chase F G

Transcription

1 Zip-CSCL Pro 1 Perforating/Creasing/Cutting Rule Chase C D E F G. SL-2363 Perf/Crease/Cut Rule Chase (shown with perforating rule and ejecting foam mounted). SL-2363 Perf/Crease/Cut Rule Chase (shown with 2 pt.. creasing rule mounted) C. SL-2533 Creasing Rule (2 pt.) D. SL teeth per inch Perforating Rule E. SL teeth per inch Perforating Rule F. SL-2772 Die Cutting Rule G. SL-2312 T1 Platen ssembly Matrix - uff - 24 #40 Matrix (not shown) 24 long Matrix - Wht - 24 #50 Matrix (not shown) 24 long The SL-2363 chase ( & ) can hold perforating, creasing and die cutting rules. When using the SL-2363 chase on the T1 station, the SL-2312 Platen ssembly (G) MUST be used. Ejecting foam should always be used when perforating. ecause ejecting foam is required for perforating, most customers buy two SL-2363 chases. One set up with foam for perforating and one set up without foam for creasing/die cutting rule. Full width perforating, cutting and creasing rule can be used, or modified rules can be used for partial width applications. 2 pt., creasing rule is standard, however other creasing rules are available as non-standard items. #40 and #50 creasing matrix are standard and most commonly used with 2 pt. creasing rule. Other creasing matrix materials are available as non-standard items. 8 and 50 teeth per inch perforating rules are standard, however other perforating rules are available.

2 Zip-CSCL Pro 2 T1 Universal Chase and Tools F C D E. SL-2414 Universal Chase. SL-2791 ssembly djust Die Cut lock T1 C. SL-2355 Punch Holder (1/4 ) #5845 1/4 Punch D. SL-2337 Punch Holder (1/8 ) #5818 1/8 Punch E. SL-2413 Punch Holder (5/64 ) #5841 5/64 Punch F. SL-2312 Platen ssembly The T1 Universal Chase () is used to mount hole punch and strike perf/slit tooling in the T1 tooling station. ll T1 Universal Chase tooling is used with the SL-2312 Platen ssembly (F). T1 Universal Chase tooling can NOT be used with any T1 Multi-tool platen assembly. Punch (C,D,E) and strike perf/slit holders () can be positioned side to side and are secured with a brass tipped set screw. ll punch tools are self cleaning, side port eject tools. The three hole sizes shown (C,D,E) are in-stock items. Other diameter hole punch tools and punch holders are available as non-standard items. 5/64 diameter holes (E) are used with plastic snaps. 1/8 diameter holes (D) are commonly used for tags. 1/4 diameter holes (C) are commonly used for three ring binders, etc. The strike perf/slit holder () uses standard precision perforating and slitting material. machined slot in the strike perf/slit holder ensures proper alignment. Hole punches and precision perf/slit material can be replaced when worn.

3 Zip-CSCL Pro 3 T1 Universal Chase with Die Cut Tooling C. SL-2414 Universal Chase. SL-2757 Die Holder C. SL-2685 T1 Multi-tool The T1 Universal Chase () is used to mount the flexible die cutting die in the T1 tooling station. ll T1 Universal Chase tooling shown on this page is used with the SL-2685 T1 Multi-tool ssembly (C). T1 Universal Chase tooling can NOT be used with the T1 SL-2312 Platen ssembly. Die Holder () can be positioned side to side and is secured with brass tipped set screws. Corner Die Cut Slot dies (die cuts angled slots to hold business cards and similar width products). L, T and perimeter perforated card dies are available.

4 Zip-CSCL Pro 4 T1 Multi-tool (Up/Down Crease) and Chase. SL-2686 T1 Multi-tool (Up/Down Crease) Chase (shown w/2 pt. creasing rule and #50 creasing matrix). SL-2662 T1 Multi-tool The T1 Multi-tool is an optional feature for the Zip-CSCL Pro. Once the Multi-tool option is installed, customers can easily switch between Multi-tool and single function T1 tooling. The T1 Multi-tool ( & ) use standard letterpress creasing rule and matrix. The T1 Multi-tool ( & ) allows up and/or down cross creasing in a single pass through the machine. Up/down cross creasing is important for products including: perfect bound book covers, Z and accordion fold cards, etc..

5 Zip-CSCL Pro 5 T1 Multi-tool and (Up/Up Rule) Chase. SL-2686 T1 Multi-tool (Up/Up Rule) Chase ssembly (shown w/2 x 2 pt. creasing rules). SL-2685 T1 Multi-tool The T1 Multi-tool () with Up/Up Rule Chase () can be used in several different ways. The Up/Up Rule Chase () can be configured with two creasing rules. Each rule can be used to apply a full width crease, or each rule can be machined to apply a partial cross crease. The photo above shows one creasing rule with a 3.5 wide center crease and the second creasing rule machined to apply two partial creases with a 3.5 center gap. This chase/rule configuration was used when running Step, Tri-Fold Shutter and Shadowbox cards. This configuration allows partial width center crease, edge creases or full width crease (using the center and edge crease at the same position on the paper). The Up/Up Rule Chase () can also be used with different combinations of rules: Crease/perforation (either can be full or partial width). Two different crease types (1 pt., 2 pt., 3 pt. creasing rules) The T1 Multi-tool is an optional feature for the Zip-CSCL Pro. Once the Multi-tool option is installed, customers can easily switch between Multi-tool and single function T1 tooling.

6 Zip-CSCL Pro 6 T1 Multi-tool (Down Crease/Up Hole Punch) Chase. SL-2758 T1 Multi-tool (Down Crease/Up Hole punch) Chase (lank). SL-2662 T1 Multi-tool #5845 1/4 Punch (not shown) #5818 1/8 Punch (shown in chase) #5841 5/64 Punch (not shown) The T1 Multi-tool () with Down Crease/Up Hole Punch Chase () can be mounted on the Zip-CSCL Pro. Once the Multi-tool option is installed, customers can easily switch between Multi-tool and single function T1 tooling. The SL-2758 Chase () is manufactured as a blank. This means the chase is complete except the holes for the hole punch tools have not been machined in the chase. The SL-2758 Chase () photo above shows a finished configuration machined to hold three, 1/8 diameter hole punches at 3.75 spacing (3.5 finished product with a.25 gutter between cards/tags). The punches are offset to punch the hole.187 in from the edge of the card/tag. Two sets of three punch mounting holes have been machined in the chase so the punches can be mounted to punch the hole to the right or left hand side of the card/tag. Hole punch tools are self cleaning, side port eject tools. Hole punches are held in place with brass tipped set screws, and can be replaced when worn. Hole punch tool position is specified by the customer to match their requirements and the SL-2758 Chase () is machined to hold the punches accordingly. In some cases, multiple hole patterns (with the same or different diameter hole punches can be machined in one chase). For example: the chase above could also be machined to hold three, 1/4 diameter hole punches spaced to match a three ring binder.