MANET. Technical manual for ordering and installation. Single-point fixings for interior applications

Transcription

1 MANET Technical manual for ordering and installation Single-point s for interior applications

2 MANET CONCEPT Pull handle/ knob system Pull handles and door knobs The pull handle/knob system is designed for glass of 8, 10 and 12 mm. The pull handles can be fixed to both sliding and pivoting (swing) doors on one face using the appropriate connectors or on both faces by through-bolting (back-to-back arrangement). The singlepoint s and through bolts are included as standard equipment in the scope of supply. The pull handles can be fitted horizontally, vertically or in a handrail arrangement. Pull handles with singlepoint s, countersunk Art. No Art. No Pull handle 720 mm Art. No Art. No Complete with single-point s Pull handle 1240 mm with 3 s Art. No Art. No Pull handle 1760 mm with 4 s Art. No Art. No Pull handles with clamping disc single-point s Single-point countersunk Single-point clamping disc Art. No Art. No Pull handle 720 mm Art. No Art. No ø32 ø Pull handle 1240 mm with 3 s Art. No Art. No Pull handle 1760 mm with 4 s Art. No Art. No /06

3 Pull handles and door knobs Complete with connecting bolt incl. connecting bolt mm, Art. No Art. No mm, Art. No Art. No mm, with 3 s Art. No Art. No ø mm, with 4 s Art. No Art. No Door knob one side für 8/10/12 mm Glas single-point countersunk ø 32 single-point clamping disc 51 Door knob with single-point, countersunk Art. No Door knob with clamping disc single-point s Art. No Door knob back-to-back Art. No /06 35

4 MANET CONCEPT Pull handle/ knob system Spacing adjustment for pull handles and door knobs Distance washer 2 mm Distance washer 5 mm doors door thickn mm: without Distance washer door thickn. 15 mm: with 1 Distance washer door thickn mm: with 2 Distance washer door thickn. 19 mm: with 3 Distance washer door thickn mm: with 4 Distance washer Timber doors door thickn. 20 mm: without distance washer door thickn. 25 mm: with 1 distance washer door thickn. 30 mm: with 2 distance washer door thickn. 35 mm: with 3 distance washer door thickn. 40 mm: with 4 distance washer Conversion set 1 for glass doors, pair of pull handles/ knob back-to-back door thickn mm Art. No Conversion set 2 for timber doors, pair of pull handles/ knob back-to-back door thickn mm Art. No doors/timber doors door thickn mm: cylinder head screw M6x25 door thickn mm: cylinder head screw M6x35 door thickn mm: cylinder head screw M6x50 preparation pull handles and door knobs Conversion set 3 for glass/timber doors, pull handle/ knob single-sided, single-point countersunk/clamping disc door thickn mm Art. No min. ca. 65 Countersunk bore on pull handle and door knob, one side min. ca. 65 ø26 ø ø mm ±0.3 mm ± mm ± mm ± Cylindrical bore on pair of pull handles and door knobs, back-to-back at length of pull handles 350 mm 36 11/06

5 Recessed pull grip und ARCOS pull handle ø Cylindrical bore ø 38 Recessed pull grip Ø 50 mm Art. No ø 60 Cylindrical bore ø 50 Recessed pull grip Ø 60 mm Art. No Grub screw 85 ~ 65 ARCOS pair of pull handle incl. connecting bolt only in Bushing Connecting bolt Art. No Pull handle 750 mm Art. No Cylindrical bore ø 16 ø /750 mm drill hole centres 398/824 mm 80 07/07 37