TOP-ECO TECHNOLOGY HISTORY

Transcription

1

2 TOP-ECO TECHNOLOGY HISTORY The Top-Eco Technology Was Created Following A Major Earthquake, Which Caused A 15-metre Tsunami That Disabled The Power Supply And Cooling Of Three Fukushima Daiichi Reactors. This Led To A Major Nuclear Accident On 11 March Following The Disaster, The Japanese Government Went To Their Top Engineers Requesting That They Find New Ways To Reduce Power Consumption Due To The Fact That They Were Going To Start Taking Other Reactors Off-line. The Inventor Of The Top-Eco Technology Won The Award For Best New Product For The Reduction Of Energy Usage In Refrigeration Systems.

3 WHAT IS THE TOP-ECO? The TOP-ECO Is A Patented Refrigeration Agitation Technology That Can Be Installed To Work With Existing 5 To 40 TON Systems. Once Installed And The Refrigerant Is Fully Agitated (5 To 10 Days) The Load On The Compressor Is Reduced, And Less Electricity Is Consumed. SYSTEMS THAT CAN BENEFIT FROM THE TOP-ECO TECHNOLOGY: Comfort AC Systems Commercial Food Storage Systems Technology Heat Mitigation Systems

4 HOW DOES TOP-ECO WORK? During The Compression Stage, The Refrigerant Is Bound Together Making The Molecule Chains Larger (More Viscous). When The Larger Refrigerant Molecule Chains Are Pushed Through The Expansion Valve It Creates More Resistance, In Turn, This Takes More Electricity To Push The Refrigerant Through The Expansion Valve To Turn It Into A Vapor. The Top-Eco Agitation Device Pre-mixes The Refrigerant Before The Expansion Valve, This Is To Break The Molecular Bonds Into Smaller Sizes To Reduce The Resistance As It Passes Through The Expansion Valve (Less Viscous). This Reduction Of Resistance In The Expansion Valve Then Reduces The Electrical Consumption In The Compressor.

5 ADVANTAGES OF THE TOP-ECO INCLUDE: Compressor Electricity Savings 15%-35% (Savings Seen As High As 48% In Rare Cases) 5-40 Tons, Large Commercial Refrigeration, HVAC And Heating Pumps ROI Within 3 Years In Most Cases Carbon Footprint Reduction Increase In Equipment Life Due To Compressor Relief!

6 TOP-ECO INSTALLATION INFORMATION Licensed And Insured Mechanical Contractor Technician Pre-Tests Unit For System Pressures, Temperatures, Power Draw (AMP And Volt) And Inspects Unit. Refrigerant Is Pumped Out Of The Lines. The Top-Eco Is Installed Between The Condenser Coil And The Expansion Valve Welds Are Tested Refrigerant Is Added Back To The System Technician Re-tests System And Certifies Running Temps, Pressures, Running Condition, Amperage And Voltage Per Industry Standards Top-Eco Is Finished Off By Wrapping With Insulation. ** SEE INSTALLATION MANUAL FOR MORE DETAILS

7 KEITH CONSULTING INDEPENDENT 3 RD PARTY PILOT Upon The Initial Site Visit the 10 TON Cold Box Product Storage Unit Was Selected By Keith Consulting. 5 Days Prior To The Install The Calibrated Fluke Data Logger Was Installed. The Data Logger Took Amperage And Voltage Samples Every 3 Minutes Temperature Loggers Were Also Installed At 3 Locations. Outside Ambient, Cold Box Ambient, And Register AIR David Keith Installing the FLUKE Data Logger at Barsotti s Apple Juice

8 KEITH CONSULTING INDEPENDENT 3 RD PARTY PILOT Keith Consulting contracted with ACCO Engineered Systems to install 1 TOP-ECO Unit on the 10 TON Cold Box Refrigeration Unit Rob From ACCO Installing the TOP-ECO

9 KEITH CONSULTING INDEPENDENT 3 RD PARTY PILOT 15 Days After The ACCO Top-Eco Unit Installation David Keith Retrieved The Data From The FLUKE Logger. On His Extensive Review Of The Data Keith Consulting Group Certified That The Top-Eco Helped The Compressor Use 48.6% LESS Electricity After10 Days Of It Being Installed.

10 WE PERFORM A COMPLETE SITE EVALUATION TO VERIFY IF THE TOP-ECO TECHNOLOGY CAN SAVE YOU MONEY Items Needed: 12 Months Of Electricity Bills To Get The Winter And Summer Utility kwh Rates Picture Of Name Plate With Make And Model Number Of Each Compressor Unit. The Diameter Of The Supply Line (Liquid Side Leaving The Unit And Going To The Expansion Valve.) The Number Of Hours The Compressor Runs Per Day (This Is Often Confused With The Fan Or Evaporator. The Savings Is Based On The Compressor Time Alone. The Number Of Months Per Year The Comfort Ac System Runs Refrigeration Systems Run All Year To Keep Food Fresh. Technology Heat Mitigation Systems Run Hard 24/7/365 To Protect Expensive Data And Hardware

11 HOW TO TEST TO VERIFY SAVINGS OF THE TOP-ECO Simple Procedures to Verify Electricity Savings After The Site Evaluation, We Will Have A Snapshot Of How Many Kilowatts (Electricity) Your Compressor(s) Is Drawing During Its Run Cycle. (Amp X Volt = Watts And Watts Divided By1000 = Kilowatts Or KW) The Licensed And Insured Mechanical Contractor Technician Will Re-test The Compressor Draw Before And After The Installation. 15+ Days After Installation Of The Top-Eco The Refrigeration System Compressor Can Be Re-Tested For Total Kilowatt Draw And Compared To The Previous Tests Data To Verify True Savings Percentage (%) Testing Shall Be Witnessed or Verified By An Agreed Upon Representative Or Hybrid Energy Solutions Or Their Agent And In The Presence Of The Customer And Their Acting Representative.

12 HYBRID ENERGY SOLUTIONS TEAM Lisa Macdonald (949) Tyler Hunter (916) Ben Joslin (530) Ben Foster (816) Mike Burkey (916) Hybrid Energy Solutions is your TOP-ECO Licensed Distributor