VAT not included. KITCHEN SINKS PRICE LIST 2018

Transcription

1 VAT not included. KITCHEN SINKS PRICE LIST 2018

2 INTRODUCTION This price list replaces all previously valid price lists. It is valid for deliveries as of 1st May The prices given in this price list are recommended retail prices (VAT not included). Variations in colour and dimensions apply within the standard tolerances. We reserve the right to change colours and models. Ceramic materials from Villeroy & Boch possess a high degree of inherent stability. They are able to withstand all water temperatures and temperature shocks from hot and cold water and are resistant to steam. The glazes on sanitary ceramics from Villeroy & Boch are to a certain extent scratch-proof and resistant to all alkalis and acids which are common in the sanitary area. This scope of resistance does not include hydrofluoric acid and its compounds. Organic solvents and intensive agents will not affect the glaze. All offers, sales and deliveries of sanitary ceramic items and accessories are based on General Sales and Delivery Conditions of Villeroy & Boch AG Bath and Wellness Division. The manufacturer s consent shall be required for reproduction or duplication in any from, including extracts. CHANGE TO THE RANGE 1. NEW PRODUCTS 1.1 SINKS 3336 Siluet 60 (page 23) 3335 Siluet 50 (page 33) 3334 Siluet 45 (page 39) F/2F Siluet 60 flat (page 53) F/2F Siluet 50 flat (page 60) F/2F Siluet 45 flat (page 64) 3365 Architectura 60 XR (page 18) 1.2 TAP FITTINGS 9278 Como Sky (page 75) 9279 Como Shower Sky (page 75) 9276 Finera Slope (page 80) 9277 Finera Square Slope (page 80) 1.3 ACCESSORIES New accessories (page 87) 2. DISCONTINUATION 2.1 SINKS 6778 Laola Metric Art TAP FITTINGS 9259 Como Style 9260 Como Style Shower 9255 Artist 8279 Amy 8278 Arion 9202 Primara with spray in all ceramic colours LF Avia in colour aura Delivery of discontinued articles from current production until , after only from existing stock. TAP HOLES OVERVIEWS When ordering your sink, please specify tap holes you would like us to drill for you, by using their reference numbers. Additional charge: 5 / tap hole Ref. Number HL1 HL2 HL3 HL4 HL5 HL6 Description Tap hole 1 punched out Tap hole 2 punched out Tap hole 3 punched out Tap hole 4 punched out Tap hole 5 punched out Tap hole 6 punched out

3 INDEX GENERAL INFORMATION GENERAL INFORMATION 4 BUILT-IN SINKS Corner sinks Size of undercabinet 80 cm Size of undercabinet 60 cm Size of undercabinet 50 cm Size of undercabinet 45 cm UNDERCOUNTER SINKS 44 FLUSHMOUNTED SINKS Size of undercabinet 60 cm Size of undercabinet 50 cm Size of undercabinet 45 cm MODULES 68 TAP FITTINGS 72 SPARE PARTS AND ACCESSORIES 87 INSTALLATION INSTRUCTIONS 93 GENERAL SALES AND DELIVERY CONDITIONS 105 3

4 GENERAL INFORMATION COLOUR RANGE Classicline Ceramicplus Flat Flat Flat Flat alpin i5 Sand i2 Cappuccino SM Steam SL Stone Flat Flat Premiumline Ceramicplus Flat Flat Flat Flat White e 50 Emerald 07 Sunrise 51 Coral 26 Midnight Trendline Ceramicplus KT Decor white pearl KW Decor la rose Please consult the inner pages of the price list for the availability of colours for the different sink models. 4

5 CERAMIC SINKS FROM VILLEROY&BOCH GENERAL INFORMATION THE HIGHEST QUALITY A LIFETIME LONG Ceramics from Villeroy&Boch combine the experience of traditional craftsmanship with maximum industrial precision. The result: products that enrich life with good design, lasting quality and with an assured sense of style. Kitchen sinks from Villeroy&Boch combine practicality and design with the tried-and-tested qualities of ceramics, which are offered by almost no other material. Discover the decisive advantages of Villeroy&Boch ceramics: 1. Scratch- and knife-resistant 2. Acid-resistant 3. Heat-resistant 4. Shock-resistant 5. Hygienic and food-safe 6. Stain proof 7. Lightfast in each colour 8. Easy to clean thanks to CeramicPlus 5

6 GENERAL INFORMATION CERAMIC SINKS: THE RANGE Corner sinks 90 cm Corner undersink cabinet side length SOLO CORNER x 60 cm Only for corner installation Size of undercabinet: 90 cm Ref (Page 15) ARENA CORNER 97.5 x 62.5 cm Only for corner installation Size of undercabinet: 90 cm Ref (Page 14) Modules 90 cm Size of undercabinet MONUMENTUM 89.6 x 89.6 cm For corner undersink cabinet diagonal 45 with side length: 90 cm Ref (Page 68) DOUBLE-BOWL SINK 89.5 x 63 x 22 cm Ref (Page 69) 60 cm Size of undercabinet SINGLE-BOWL SINK 59.5 x 63 x 22 cm Ref (Page 70) 6

7 CERAMIC SINKS: THE RANGE GENERAL INFORMATION Built-in sinks 80 cm Size of undercabinet Bowl on the right Bowl on the left Bowl reversible CONDOR x 51 cm Ref (Page 16) SUBWAY x 51 cm Ref (Page 17) Built-in and undercounter sinks 60 cm Size of undercabinet ARCHITECTURA 60 ARCHITECTURA 60 XR CONDOR 60 FLAVIA 60 NEW WAVE x 51 cm 100 x 51 cm 100 x 51 cm 101 x 51 cm 98 x 51 cm Ref (Page 19) Ref (Page 18) Ref (Page 20) Ref (Page 21) Ref (Page 22) SILUET 60 SUBWAY 60 SUBWAY 60 XL SUBWAY 60 XM SUBWAY 60 XR 100 x 51 cm 100 x 51 cm 100 x 51 cm 62 x 51 cm 100 x 51 cm Ref (Page 23) Ref Ref (Page 24) Ref Ref (Page 26) Ref (Page 27) Ref Ref (Page 28) SUBWAY 60 S TIMELINE 60 CISTERNA 60B CISTERNA 60C SUBWAY 60 SU SUBWAY 60 XU 60 x 51 cm Ref (Page 25) 100 x 51 cm Ref (Page 29) 54.5 x 44 cm for undercounter Ref (Page 44) 55 x 44 cm for undercounter Ref (Page 45) 54.5 x 44 cm for undercounter Ref (Page 49) 54.5 x 44 cm for undercounter Ref (Page 50) 7

8 GENERAL INFORMATION CERAMIC SINKS: THE RANGE Built-in and undercounter sinks 50 cm Size of undercabinet ARCHITECTURA 50 CONDOR 50 FLAVIA 50 SILUET 50 SUBWAY x 51 cm 86 x 51 cm 90 x 51 cm 90 x 51 cm 91.5 x 51 cm Ref (Page 30) Ref (Page 31) Ref (Page 32) Ref (Page 33) Ref Ref (Page 34) SUBWAY 50 S TIMELINE 50 CISTERNA 50 SUBWAY 50 SU 52.5 x 51 cm Ref (Page 35) 90 x 51 cm Ref (Page 36) 44.5 x 44.5 cm for undercounter Ref (Page 46) 44 x 44 cm for undercounter Ref (Page 51) Built-in and undercounter sinks 45 cm / 26 cm Size of undercabinet CONDOR 45 FLAVIA 45 SILUET 45 SUBWAY 45 SUBWAY 45 COMPACT 80 x 51 cm 80 x 51 cm 80 x 51 cm 78 x 51 cm 65 x 51 cm Ref (Page 37) Ref (Page 38) Ref (Page 39) Ref Ref (Page 41) Ref Ref (Page 40) SUBWAY 45 XS TIMELINE 45 CISTERNA 45 SUBWAY 45 SU CISTERNA x 51 cm Ref (Page ) 80 x 51 cm Ref (Page 43) 37 x 43.5 cm for undercounter Ref (Page 47) 37.5 x 44 cm for undercounter Ref (Page 52) 26 x 44 cm for undercounter Ref (Page 48) 8

9 CERAMIC SINKS: THE RANGE GENERAL INFORMATION Flush-mounted sinks 60 cm Size of undercabinet SILUET 60 FLAT SUBWAY 60 FLAT SUBWAY 60 XL FLAT SUBWAY 60 XM FLAT SUBWAY 60 XR FLAT 98 x 49 cm 96.5 x 47.5 cm 96.5 x 47.5 cm 58.5 x 47.5 cm 96.5 x 47.5 cm Ref (Page 53) Ref Art.Nr (Page 54) Ref Ref (Page 56) Ref (Page 57) Ref Ref (Page 58) SUBWAY 60 S FLAT TIMELINE 60 FLAT 56.5 x 47.5 cm 96.5 x 47.5 cm Ref (Page 55) Ref (Page 59) Flush-mounted sinks 50 cm Size of undercabinet SILUET 50 FLAT SUBWAY 50 FLAT SUBWAY 50 S FLAT TIMELINE 50 FLAT 88 x 49 cm 88 x 47.5 cm 49 x 47.5 cm 86.5 x 47.5 cm Ref (Page 60) Ref Ref (Page 61) Ref (Page 62) Ref (Page 63) Flush-mounted sinks 45 cm Size of undercabinet SILUET 45 FLAT SUBWAY 45 FLAT SUBWAY 45 XS FLAT TIMELINE 45 FLAT 78 x 49 cm 74.5 x 47.5 cm 44 x 47.5 cm 76.5 x 47.5 cm Ref (Page 64) Ref Ref (Page 65) Ref (Page 66) Ref (Page 67) 9

10 GENERAL INFORMATION CERAMIC SINKS: DÉCORS BRING YOUR CERAMICS TO LIFE La Rose and White Pearl, two charming white-on-white decors available for selected sinks. Inspired by extensive expertise in decorative techniques from the tableware sector, the unique La Rose and White Pearl surface finishes are available exclusively from Villeroy&Boch. LA ROSE DÉCOR WHITE PEARL DÉCOR LA ROSE DÉCOR WHITE PEARL DÉCOR Art. no. on draining area 6790 Timeline Timeline Timeline /6770 Subway /6720 Subway 60 XR 6719/6718 Subway 60 XL 6713/6773 Subway /6772 Subway 45 Art. no. on tap ledge 6721/6720 Subway 60 XR 6712/6770 Subway /6718 Subway 60 XL 6713/6773 Subway /6772 Subway 45 at the front 6320 Butler sink 60 cm 6323 Butler sink 90 cm Our décors are only available for the basic colour White Alpin () and for built-in sinks (not possible for flush-fit or undercounter sinks). 10

11 CERAMIC SINKS: ADVANTAGES GENERAL INFORMATION A VERY SPECIAL MATERIAL Kitchen sinks are subject to considerable stress because contact with acidic foods, sharp kitchen implements and hot pans is part and parcel of everyday life. This makes the quality of the material all the more important. With a ceramic sink from Villeroy&Boch, you benefit from 270 years of experience, revolutionary production techniques and 100% natural raw materials. For maximum comfort, minimum maintenance and unparalleled durability. 1. SCRATCH- AND KNIFE-RESISTANT The high-quality surface is so robust that even knives hardly leave a trace. 2. ACID-RESISTANT Our ceramic easily withstands contact with acidic foods or household cleaning agents. 3. HEAT-RESISTANT Hot oven dishes don t leave a mark on Villeroy & Boch ceramic sinks. 4. SHOCK-RESISTANT Thanks to the great material stability, the sinks are impact-resistant, even when heavy pots and pans are placed on them. 5. HYGIENIC AND FOOD-SAFE The natural material does not take on flavours or smells and so is absolutely food safe. 6. STAIN-PROOF Food and drinks don t leave any trace on the surface of our ceramic sinks. 7. LIGHTFAST IN EACH COLOUR Even after long-term exposure to direct sunlight, our ceramic colours stay as vivid as on the very first day. 8. ESPECIALLY EASY TO CLEAN Our ceramic is very easy to clean. Thanks to the CeramicPlus finish, dirt and limescale almost disappear of their own accord. 11

12 GENERAL INFORMATION VILLEROY&BOCH: SUSTAINABILITY RESPONSIBLE: ENVIRONMENTAL PROTECTION IS SECOND NATURE TO VILLEROY&BOCH Environmental protection is self-evident for Villeroy&Boch, and all relevant process are controlled and linked worldwide by a central environment management unit. With a view to developing innovative production processes and solutions making more efficient use of energy and raw materials, reducing emissions and extending the service life of products well beyond the levels set by laws and regulations. SOME OF VILLEROY&BOCH S ENVIRONMENTAL ACTIVITIES: Continual reduction of waste water at all plants 40% reduction in CO2 emissions in Mettlach since 2005 EMAS (Eco Management and Audit Scheme) validation One of the first ceramics manufacturers worldwide to be awarded ISO 9001 certification Certification in accordance with international environmental management standard ISO and energy management standard DIN EN ISO Quality assurance in accordance with REACH regulation (EC) No. 1907/2006 (Registration, Evaluation, Authorisation and Restriction of Chemicals) EMAS validation (Eco Management And Audit Scheme) Bend in the Saar close to the headquarters of Villeroy & Boch AG in Mettlach 12

13 VILLEROY&BOCH: INNOVATIONS GENERAL INFORMATION INNOVATIONS FOR UNIQUE QUALITY Villeroy&Boch product development focuses on sophisticated designs with outstanding product properties. In the kitchen in particular, stability and hygiene are crucial. Two Villeroy&Boch innovations offer clear advantages: TITANCERAM Villeroy&Boch s answer to the question of future materials is to fuse selected natural raw materials such as feldspar, quartz, clay and titanium dioxide to create the innovative TitanCeram. For the first time, this material permits the manufacture of products with a unique, precise design and very thin walls, sharply defined edges and all the advantages of first-class ceramics. CERAMICPLUS The CeramicPlus finish ensures optimum hygiene and fresh cleanliness on kitchen surfaces: liquids form beads which simply roll down the drain. Dirt and limescale are virtually unable to gain a hold. So cleaning is quick and easy without the use of any agents that are harmful to the environment. Conventional ceramics CeramicPlus finish Ceramics from master craftsmen 13

14 ARENA CORNER BUILT-IN SINKS Corner sink For surface-mounted installation Installation on a corner undersink cabinet with 90 cm wwside length Registered design Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Corner sink with additional outlet in the draining board inclusive Strainer bowl and Waste system basket strainer XX Corner sink with additional outlet in the draining board inclusive Strainer bowl and Waste system pop-up 1.169, , , ,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White Ref. Optional accessories / spare parts K1 Salad basket, stainless steel 129, K2 Strainer bowl, transparent 51, Waste system basket strainer, chrome 78, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. The tap holes marked with an o are punched through as standard at the factory. 14 Please refer to the assembly instructions Required size of worktop: see attached template (Ref A0)

15 SOLO CORNER Corner sink For surface-mounted installation Installation on a corner undersink cabinet with 90 cm side length 2 basins, closable Registered design BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Corner sink inclusive Waste system basket strainer and Strainer bowl 998, , XX Corner sink inclusive Waste system pop-up and Strainer bowl 1.063, ,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White Ref. Optional accessories / spare parts 8K09 00 K1 Salad basket, stainless steel 129, K2 Strainer bowl, transparent 49, K Waste system basket strainer, chrome 75,- 8K Waste system pop-up without Cover cap 140, L7 Cover cap for double turn lever, round, matt 35, Cover cap for double turn lever, round, chrome 35, L7 Cover cap for double turn lever, angular, matt 35, Cover cap for double turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. The tap holes marked with an o are punched through as standard at the factory. Please refer to the assembly instructions Required size of worktop: see attached template (Ref B3 A5) 15

16 CONDOR 80 BUILT-IN SINKS The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 80 cm 2 basins, closable Registered design Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 1.221, , XX Sink inclusive Waste system pop-up 1.290, ,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Universal cutting board walnut 159, K1 Inset strainer, stainless steel 116, Waste system basket strainer, chrome 105, Waste system pop-up without Cover cap 175, L7 Cover cap for double turn lever, round, matt 35, Cover cap for double turn lever, round, chrome 35, L7 Cover cap for double turn lever, angular, matt 35, Cover cap for double turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 16 Please refer to the assembly instructions Required size of worktop: 113 x 47 cm

17 SUBWAY 80 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 80 cm 2 basins, closable Registered design BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 1.237, , XX Sink inclusive Waste system pop-up 1.309, ,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Universal cutting board walnut 159, K1 Inset strainer, stainless steel 116, Waste system basket strainer, chrome 105, Waste system pop-up without Cover cap 178, L7 Cover cap for double turn lever, round, matt 35, Cover cap for double turn lever, round, chrome 35, L7 Cover cap for double turn lever, angular, matt 35, Cover cap for double turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 113 x 48 cm 17

18 ARCHITECTURA 60 XR The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 60 cm 2 basins, closable BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 699,00 778, XX Sink inclusive Waste system pop-up 771,00 850,00 Classicline CeramicPlus Premiumline CeramicPlus SM Steam SL Stone i5 Sand alpin White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Universal cutting board walnut 159, K1 Steamer container 1/3, stainless steel, K1 Inset strainer, stainless steel 116, Waste system basket strainer, chrome 105, Waste system pop-up without Cover cap 178, L7 Cover cap for double turn lever, round, matt 35, Cover cap for double turn lever, round, chrome 35, L7 Cover cap for double turn lever, angular, matt 35, Cover cap for double turn lever, angular, chrome 35, View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model Please refer to the assembly instructions Required size of worktop: 97 x 48 cm

19 ARCHITECTURA 60 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 60 cm BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 690,00 773, XX Sink inclusive Waste system pop-up 777,00 860,00 Classicline CeramicPlus Premiumline CeramicPlus SM Steam SL Stone i5 Sand alpin White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Universal cutting board walnut 159, K1 Inset strainer, stainless steel 116, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 97 x 48 cm 19

20 CONDOR 60 BUILT-IN SINKS The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 60 cm Registered design Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Strainer bowl and Waste system basket strainer 968, , XX Sink inclusive Strainer bowl and Waste system pop-up 1.038, ,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Universal cutting board walnut 159, K2 Strainer bowl, transparent 47, K1 Inset strainer, stainless steel 116, Waste system basket strainer, chrome 78, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 20 Please refer to the assembly instructions Required size of worktop: 97 x 47 cm

21 FLAVIA 60 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 60 cm Compatible with all soap dispensers on page 86 BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 986, , XX Sink inclusive Waste system pop-up 1.056, ,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 8K Universal cutting board walnut 159,- 8K23 00 K1 Strainer bowl, stainless steel 111,- 8K Waste system basket strainer, chrome 78,- 8K Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- 130, View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 98 x 48 cm 21

22 NEWWAVE 60 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 60 cm Registered design BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Strainer bowl and Waste system basket strainer 1.027, , XX Sink inclusive Strainer bowl and Waste system pop-up 1.097, ,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White Ref. Optional accessories / spare parts K1 Salad basket, stainless steel 129, K2 Strainer bowl, transparent 56, Waste system basket strainer, chrome 78, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 22 Please refer to the assembly instructions Required size of worktop: see attached template (Ref B2 A5)

23 SILUET 60 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 60 cm Steamer containers 1/3 and 2/3 compatible with salad basket Material: TitanCeram BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 984, , XX Sink inclusive Waste system pop-up 1.070, ,00 Classicline CeramicPlus Premiumline CeramicPlus SM Steam SL Stone i5 Sand alpin White Ref. Optional accessories / spare parts K10 00 K1 Salad basket, stainless steel 198,- 9K08 00 K1 Rolling mat, stainless steel 105, K Universal cutting board walnut 159, K1 Steamer container 1/3, stainless steel, K1 Steamer container 2/3, stainless steel 61, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 97 x 48 cm 23

24 SUBWAY 60 BUILT-IN SINKS Available with bowl on the right or left-hand side For surface-mounted installation Minimum width of undersink cabinet: 60 cm Registered design Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline XX Sink bowl right inclusive Waste system basket strainer 920, , , XX Sink bowl left inclusive Waste system basket strainer 920, , , XX Sink bowl right inclusive Waste system pop-up 990, , , XX Sink bowl left inclusive Waste system pop-up 990, , ,00 Classicline CeramicPlus Premiumline CeramicPlus Trendline CeramicPlus i2 Cappuccino i5 Sand alpin KW Decor la rose (on the draining area) SM Steam KT Decor white pearl (on the tap hole surface) SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 78, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 24 Please refer to the assembly instructions Required size of worktop: 97 x 48 cm

25 SUBWAY 60 S For surface-mounted installation Minimum width of undersink cabinet: 60 cm Compatible with all soap dispensers on page 86 BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 780,00 877, XX Sink inclusive Waste system pop-up 867,00 964,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin 50 Emerald 07 Sunrise SM Steam 51 Coral 26 Midnight SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 130, K08 00 K1 Rolling mat, stainless steel 105,- 8K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 57 x 48 cm 25

26 SUBWAY 60 XL BUILT-IN SINKS Available with bowl on the right or left-hand side For surface-mounted installation Minimum width of undersink cabinet: 60 cm Registered design Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline XX Sink bowl right inclusive Waste system basket strainer 889, , , XX Sink bowl left inclusive Waste system basket strainer 889, , , XX Sink bowl right inclusive Waste system pop-up 976, , , XX Sink bowl left inclusive Waste system pop-up 976, , ,00 Classicline CeramicPlus Premiumline CeramicPlus Trendline CeramicPlus i2 Cappuccino i5 Sand alpin KW Decor la rose (on the draining area) SM Steam KT Decor white pearl (on the tap hole surface) SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 130, K08 00 K1 Rolling mat, stainless steel 105,- 8K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 26 Please refer to the assembly instructions Required size of worktop: 97 x 48 cm

27 SUBWAY 60 XM For surface-mounted installation Minimum width of undersink cabinet: 60 cm Compatible with all soap dispensers on page 86 BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 817,00 917, XX Sink inclusive Waste system pop-up 887,00 987,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Universal cutting board walnut 159,- 8K34 00 K1 Strainer bowl, stainless steel 111, K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 78, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 59 x 48 cm 27

28 SUBWAY 60 XR BUILT-IN SINKS Available with bowl on the right or left-hand side For surface-mounted installation Minimum width of undersink cabinet: 60 cm 2 basins, closable Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline XX Sink bowl right inclusive Waste system basket strainer 994, , , XX Sink bowl left inclusive Waste system basket strainer 994, , , XX Sink bowl right inclusive Waste system pop-up 1.066, , , XX Sink bowl left inclusive Waste system pop-up 1.066, , ,00 Classicline CeramicPlus Premiumline CeramicPlus Trendline CeramicPlus i2 Cappuccino i5 Sand alpin KW Decor la rose (on the draining area) SM Steam KT Decor white pearl (on the tap hole surface) SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 105, Waste system pop-up without Cover cap 178, L7 Cover cap for double turn lever, round, matt 35, Cover cap for double turn lever, round, chrome 35, L7 Cover cap for double turn lever, angular, matt 35, Cover cap for double turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 28 Please refer to the assembly instructions Required size of worktop: 97 x 48 cm

29 TIMELINE 60 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 60 cm Compatible with all soap dispensers on page 86 BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline XX Sink inclusive Waste system basket strainer 955, , , XX Sink inclusive Waste system pop-up 1.0, , ,00 Classicline CeramicPlus Premiumline CeramicPlus Trendline CeramicPlus i2 Cappuccino i5 Sand alpin 50 Emerald 07 Sunrise KW Decor la rose (on the draining area) SM Steam 51 Coral 26 Midnight SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Universal cutting board walnut 159, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 97 x 48 cm 29

30 ARCHITECTURA 50 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 50 cm BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 607,00 678, XX Sink inclusive Waste system pop-up 694,00 765,00 Classicline CeramicPlus Premiumline CeramicPlus SM Steam SL Stone i5 Sand alpin White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Universal cutting board walnut 159, K1 Inset strainer, stainless steel 116, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 30 Required size of worktop: 83 x 48 cm

31 CONDOR 50 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 50 cm Registered design BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Strainer bowl and Waste system basket strainer 861,00 960, XX Sink inclusive Strainer bowl and Waste system pop-up 931, ,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White Ref. Optional accessories / spare parts K1 Salad basket, stainless steel 129, K08 00 K1 Rolling mat, stainless steel 105,- 8K Universal beechwood cutting board 112,- 8K Universal cutting board walnut 159, K2 Strainer bowl, transparent 47, K1 Inset strainer, stainless steel 116, Waste system basket strainer, chrome 78, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 82,5 x 47 cm 31

32 FLAVIA 50 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 50 cm BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 871,00 979, XX Sink inclusive Waste system pop-up 941, ,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 8K Universal cutting board walnut 159,- 8K24 00 K1 Strainer bowl, stainless steel 90,- 8K Waste system basket strainer, chrome 78,- 8K Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- 130, View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 32 Please refer to the assembly instructions Required size of worktop: 87 x 48 cm

33 SILUET 50 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 50 cm Steamer container 1/3 compatible with salad basket Material: TitanCeram BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 877,00 989, XX Sink inclusive Waste system pop-up 963, ,00 Classicline CeramicPlus Premiumline CeramicPlus SM Steam SL Stone i5 Sand alpin White Ref. Optional accessories / spare parts K11 00 K1 Salad basket, stainless steel 188,- 9K08 00 K1 Rolling mat, stainless steel 105, K Universal cutting board walnut 159, K1 Steamer container 1/3, stainless steel, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 87 x 48 cm 33

34 SUBWAY 50 BUILT-IN SINKS Available with bowl on the right or left-hand side For surface-mounted installation Minimum width of undersink cabinet: 50 cm Registered design Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline XX Sink bowl right inclusive Waste system basket strainer 810,00 909,00 974, XX Sink bowl left inclusive Waste system basket strainer 810,00 909,00 974, XX Sink bowl right inclusive Waste system pop-up 880,00 979, , XX Sink bowl left inclusive Waste system pop-up 880,00 979, ,00 Classicline CeramicPlus Premiumline CeramicPlus Trendline CeramicPlus i2 Cappuccino i5 Sand alpin KW Decor la rose (on the draining area) SM Steam KT Decor white pearl (on the tap hole surface) SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 78, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 34 Please refer to the assembly instructions Required size of worktop: 88 x 48 cm

35 SUBWAY 50 S For surface-mounted installation Minimum width of undersink cabinet: 50 cm Steamer containers 1/3 and 2/3 compatible with salad basket Compatible with all soap dispensers on page 86 BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 691,00 774, XX Sink inclusive Waste system pop-up 778,00 861,00 Classicline CeramicPlus i2 Cappuccino i5 Sand alpin Premiumline CeramicPlus 50 Emerald 07 Sunrise SM Steam 51 Coral 26 Midnight SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 8K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K1 Steamer container 1/3, stainless steel, K1 Steamer container 2/3, stainless steel 61,- 8K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- 130, View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 49,5 x 48 cm 35

36 TIMELINE 50 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 50 cm Compatible with all soap dispensers on page 86 BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline XX Sink inclusive Waste system basket strainer 852,00 960, , XX Sink inclusive Waste system pop-up 939, , ,00 Classicline CeramicPlus Premiumline CeramicPlus Trendline CeramicPlus i5 Sand alpin 50 Emerald 07 Sunrise KW Decor la rose (on the draining area) SM Steam 51 Coral 26 Midnight SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 8K Universal cutting board walnut 159, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- i2 Cappuccino 130, View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 36 Please refer to the assembly instructions Required size of worktop: 87 x 48 cm

37 CONDOR 45 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 45 cm BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 706,00 789, XX Sink inclusive Waste system pop-up 776,00 859,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Universal cutting board walnut 159, K1 Inset strainer, stainless steel 116, Waste system basket strainer, chrome 78, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 76 x 47 cm 37

38 FLAVIA 45 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 45 cm BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 746,00 835, XX Sink inclusive Waste system pop-up 816,00 905,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 8K Universal cutting board walnut 159,- 8K24 00 K1 Strainer bowl, stainless steel 90,- 8K Waste system basket strainer, chrome 78,- 8K Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- 130, View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 38 Please refer to the assembly instructions Required size of worktop: 77 x 48 cm

39 SILUET 45 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 45 cm Steamer container 1/3 compatible with salad basket Material: TitanCeram BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 765,00 860, XX Sink inclusive Waste system pop-up 851,00 946,00 Classicline CeramicPlus Premiumline CeramicPlus SM Steam SL Stone i5 Sand alpin White Ref. Optional accessories / spare parts 9K12 00 K1 Salad basket, stainless steel 178,- 9K08 00 K1 Rolling mat, stainless steel 105, K Universal cutting board walnut 159, K1 Steamer container 1/3, stainless steel, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 77 x 48 cm 39

40 SUBWAY 45 COMPACT Available with bowl on the right or left-hand side For surface-mounted installation Minimum width of undersink cabinet: 45 cm Compatible with all soap dispensers on page 86 BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink bowl right inclusive Waste system basket strainer 670,00 750, XX Sink bowl left inclusive Waste system basket strainer 670,00 750, XX Sink bowl right inclusive Waste system pop-up 757,00 837, XX Sink bowl left inclusive Waste system pop-up 757,00 837,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 40 Please refer to the assembly instructions Required size of worktop: 62 x 48 cm

41 SUBWAY 45 Available with bowl on the right or left-hand side For surface-mounted installation Minimum width of undersink cabinet: 45 cm Compatible with all soap dispensers on page 86 BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline XX Sink bowl right inclusive Waste system basket strainer 684,00 766,00 821, XX Sink bowl left inclusive Waste system basket strainer 684,00 766,00 821, XX Sink bowl right inclusive Waste system pop-up 771,00 853,00 908, XX Sink bowl left inclusive Waste system pop-up 771,00 853,00 908,00 Classicline CeramicPlus Premiumline CeramicPlus Trendline CeramicPlus i2 Cappuccino i5 Sand alpin KW Decor la rose (on the draining area) SM Steam KT Decor white pearl (on the tap hole surface) SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 74 x 48 cm 41

42 SUBWAY 45 XS For surface-mounted installation Minimum width of undersink cabinet: 45 cm Compatible with all soap dispensers on page 86 BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Sink inclusive Waste system basket strainer 672,00 753, XX Sink inclusive Waste system pop-up 759,00 840,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin 50 Emerald 07 Sunrise SM Steam 51 Coral 26 Midnight SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 44,5 x 48 cm

43 TIMELINE 45 The sink is reversible For surface-mounted installation Minimum width of undersink cabinet: 45 cm Compatible with all soap dispensers on page 86 BUILT-IN SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline XX Sink inclusive Waste system basket strainer 743,00 834,00 895, XX Sink inclusive Waste system pop-up 830,00 921,00 982,00 Classicline CeramicPlus Premiumline CeramicPlus Trendline CeramicPlus i2 Cappuccino i5 Sand alpin 50 Emerald 07 Sunrise KW Decor la rose (on the draining area) SM Steam 51 Coral 26 Midnight SL Stone White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Universal cutting board walnut 159, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions Required size of worktop: 77 x 48 cm 43

44 CISTERNA 60B Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm 2 basins, closable Registered design Possible combinations undercounter see pages 103/104 Compatible with all soap dispensers on page 86 UNDERCOUNTER SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Undercounter sink inclusive Waste system basket strainer, Fastening set and Strainer bowl 838,00 924, XX Undercounter sink inclusive Waste system pop-up, Fastening set and Strainer bowl 907,00 993,00 Classicline CeramicPlus i2 Cappuccino i5 Sand alpin Premiumline CeramicPlus SM Steam SL Stone White Ref. Optional accessories / spare parts K1 Salad basket, stainless steel 129,- 9K08 00 K1 Rolling mat, stainless steel 105, K2 Strainer bowl, transparent 49, Waste system basket strainer, chrome 105, Waste system pop-up without Cover cap 175, L7 Cover cap for double turn lever, round, matt 35, Cover cap for double turn lever, round, chrome 35, L7 Cover cap for double turn lever, angular, matt 35, Cover cap for double turn lever, angular, chrome 35, Fastening set 36,- Required size of worktop 6702 Required size of worktop: see attached template (Ref A2) 44 Please refer to the assembly instructions

45 CISTERNA 60C Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Registered design Possible combinations undercounter see pages 103/104 Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Undercounter sink inclusive Waste system basket strainer and Fastening set 797,00 891, XX Undercounter sink inclusive Waste system pop-up and Fastening set 884,00 978,00 Classicline CeramicPlus i2 Cappuccino i5 Sand alpin Premiumline CeramicPlus UNDERCOUNTER SINKS SM Steam SL Stone White Ref. Optional accessories / spare parts K1 Salad basket, stainless steel 129,- 9K08 00 K1 Rolling mat, stainless steel 105, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Fastening set 36,- Required size of worktop 6706 Required size of worktop: see attached template (Ref A3) Please refer to the assembly instructions 45

46 CISTERNA 50 Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 50 cm Registered design Possible combinations undercounter see pages 103/104 Compatible with all soap dispensers on page 86 UNDERCOUNTER SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Undercounter sink inclusive Waste system basket strainer and Fastening set 740,00 825, XX Undercounter sink inclusive Waste system pop-up and Fastening set 827,00 912,00 Classicline CeramicPlus i2 Cappuccino i5 Sand alpin Premiumline CeramicPlus SM Steam SL Stone White Ref. Optional accessories / spare parts K1 Salad basket, stainless steel 129,- 9K08 00 K1 Rolling mat, stainless steel 105, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Fastening set 36,- Required size of worktop 6703 Required size of worktop: see attached template (Ref A2) 46 Please refer to the assembly instructions

47 CISTERNA 45 Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 45 cm Registered design Possible combinations undercounter see pages 103/104 Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Undercounter sink inclusive Waste system basket strainer and Fastening set 710,00 791, XX Undercounter sink inclusive Waste system pop-up and Fastening set 797,00 878,00 Classicline CeramicPlus i2 Cappuccino i5 Sand alpin Premiumline CeramicPlus UNDERCOUNTER SINKS SM Steam SL Stone White Ref. Optional accessories / spare parts K1 Salad basket, stainless steel 129,- 9K08 00 K1 Rolling mat, stainless steel 105, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Fastening set 36,- Required size of worktop 6704 Required size of worktop: see attached template (Ref A2) Please refer to the assembly instructions 47

48 CISTERNA 26 Installation in natural stone or artificial stone countertops Registered design Possible combinations undercounter see pages 103/104 UNDERCOUNTER SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Undercounter sink inclusive Waste system basket strainer and Fastening set 502,00 552, XX Undercounter sink inclusive Waste system pop-up and Fastening set 589,00 639,00 Classicline CeramicPlus i2 Cappuccino i5 Sand alpin Premiumline CeramicPlus SM Steam SL Stone White Ref. Optional accessories / spare parts 9K08 00 K1 Rolling mat, stainless steel 105, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Fastening set 36,- Required size of worktop 6707 Required size of worktop: see attached template (Ref A3) 48 Please refer to the assembly instructions

49 SUBWAY 60 SU Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Possible combinations undercounter see pages 103/104 Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Undercounter sink inclusive Waste system basket strainer 823,00 926, XX Undercounter sink inclusive Waste system pop-up 910, ,00 Classicline CeramicPlus i2 Cappuccino i5 Sand alpin Premiumline CeramicPlus 50 Emerald 07 Sunrise UNDERCOUNTER SINKS SM Steam 51 Coral 26 Midnight SL Stone White Ref. Optional accessories / spare parts K1 Salad basket, stainless steel 129,- 9K08 00 K1 Rolling mat, stainless steel 105, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Fastening set 36,- Required size of worktop 3310 Required size of worktop: see attached template (Ref G9 A9) Please refer to the assembly instructions 49

50 SUBWAY 60 XU Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm 2 basins, closable Steamer containers 1/3 and 2/3 compatible with salad basket Compatible with all soap dispensers on page 86 UNDERCOUNTER SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Undercounter sink inclusive Waste system basket strainer 860,00 962, XX Undercounter sink inclusive Waste system pop-up 929, ,00 Classicline CeramicPlus i2 Cappuccino i5 Sand alpin Premiumline CeramicPlus SM Steam SL Stone White Ref. Optional accessories / spare parts K1 Salad basket, stainless steel 129,- 9K08 00 K1 Rolling mat, stainless steel 105, K1 Steamer container 1/3, stainless steel, K1 Steamer container 2/3, stainless steel 61, Waste system basket strainer, chrome 105, Waste system pop-up without Cover cap 175, L7 Cover cap for double turn lever, round, matt 35, Cover cap for double turn lever, round, chrome 35, L7 Cover cap for double turn lever, angular, matt 35, Cover cap for double turn lever, angular, chrome 35, Fastening set 36,- Required size of worktop 6758 Required size of worktop: see attached template (Ref G9 A9) 50 Please refer to the assembly instructions

51 SUBWAY 50 SU Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 50 cm Possible combinations undercounter see pages 103/104 Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Undercounter sink inclusive Waste system basket strainer 679,00 761, XX Undercounter sink inclusive Waste system pop-up 766,00 848,00 Classicline CeramicPlus i2 Cappuccino i5 Sand alpin Premiumline CeramicPlus 50 Emerald 07 Sunrise UNDERCOUNTER SINKS SM Steam 51 Coral 26 Midnight SL Stone White Ref. Optional accessories / spare parts K1 Salad basket, stainless steel 129,- 9K08 00 K1 Rolling mat, stainless steel 105, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Fastening set 36,- Required size of worktop 3325 Required size of worktop: see attached template (Ref L0 A4) Please refer to the assembly instructions 51

52 SUBWAY 45 SU Installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 45 cm Possible combinations undercounter see pages 103/104 Compatible with all soap dispensers on page 86 UNDERCOUNTER SINKS Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Undercounter sink inclusive Waste system basket strainer 668,00 748, XX Undercounter sink inclusive Waste system pop-up 755,00 835,00 Classicline CeramicPlus i2 Cappuccino i5 Sand alpin Premiumline CeramicPlus 50 Emerald 07 Sunrise SM Steam 51 Coral 26 Midnight SL Stone White Ref. Optional accessories / spare parts K1 Salad basket, stainless steel 129,- 9K08 00 K1 Rolling mat, stainless steel 105, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Fastening set 36,- Required size of worktop 3324 Required size of worktop: see attached template (Ref L1 A4) 52 Please refer to the assembly instructions

53 SILUET 60 FLAT The sink is reversible For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Minimum thickness of the countertop when placed with a dishwasher: at least 3 cm Steamer containers 1/3 and 2/3 compatible with salad basket Material: TitanCeram Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink inclusive Waste system basket strainer 1.075, , F XX Sink inclusive Waste system pop-up 1.161, ,00 Classicline CeramicPlus Premiumline CeramicPlus alpin White FLUSH-MOUNTED SINKS Ref. Optional accessories / spare parts K10 00 K1 Salad basket, stainless steel 198,- 9K08 00 K1 Rolling mat, stainless steel 105, K Universal cutting board walnut 159, K1 Steamer container 1/3, stainless steel, K1 Steamer container 2/3, stainless steel 61, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100! 53

54 SUBWAY 60 FLAT Available with bowl on the right or left-hand side For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Minimum thickness of the countertop when placed with a dishwasher: at least 4 cm Registered design Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink bowl right inclusive Waste system basket strainer 1.021, , F XX Sink bowl left inclusive Waste system basket strainer 1.021, , F XX Sink bowl right inclusive Waste system pop-up 1.091, , F XX Sink bowl left inclusive Waste system pop-up 1.091, ,00 Classicline CeramicPlus Premiumline CeramicPlus FLUSH-MOUNTED SINKS alpin White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 78, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 54 Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100!

55 SUBWAY 60 S FLAT For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Minimum thickness of the countertop: at least 3 cm Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink inclusive Waste system basket strainer 863,00 972, F XX Sink inclusive Waste system pop-up 950, ,00 Classicline CeramicPlus Premiumline CeramicPlus alpin 51 Coral 50 Emerald 26 Midnight White 07 Sunrise FLUSH-MOUNTED SINKS Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 130, K08 00 K1 Rolling mat, stainless steel 105,- 8K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100! 55

56 SUBWAY 60 XL FLAT Available with bowl on the right or left-hand side For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Minimum thickness of the countertop when placed with a dishwasher: at least 4 cm Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink bowl right inclusive Waste system basket strainer 960, , F XX Sink bowl left inclusive Waste system basket strainer 960, , F XX Sink bowl right inclusive Waste system pop-up 1.047, , F XX Sink bowl left inclusive Waste system pop-up 1.047, ,00 FLUSH-MOUNTED SINKS Classicline CeramicPlus alpin Premiumline CeramicPlus White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 8K Cutting board walnut 138,- 8K Universal cutting board walnut 159,- 8K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- 130, View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 56 Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100!

57 SUBWAY 60 XM FLAT For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Minimum thickness of the countertop: at least 3 cm Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink inclusive Waste system basket strainer 891, , F XX Sink inclusive Waste system pop-up 961, ,00 Classicline CeramicPlus alpin Premiumline CeramicPlus White FLUSH-MOUNTED SINKS Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 78, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100! 57

58 SUBWAY 60 XR FLAT Available with bowl on the right or left-hand side For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm 2 basins, closable Minimum thickness of the countertop when placed with a dishwasher: at least 4 cm Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink bowl right inclusive Waste system basket strainer 1.049, , F XX Sink bowl left inclusive Waste system basket strainer 1.049, , F XX Sink bowl right inclusive Waste system pop-up 1.121, , F XX Sink bowl left inclusive Waste system pop-up 1.121, ,00 Classicline CeramicPlus Premiumline CeramicPlus FLUSH-MOUNTED SINKS alpin White Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 105, Waste system pop-up without Cover cap 178, L7 Cover cap for double turn lever, round, matt 35, Cover cap for double turn lever, round, chrome 35, L7 Cover cap for double turn lever, angular, matt 35, Cover cap for double turn lever, angular, chrome 35, Montage set 18,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 58 Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100!

59 TIMELINE 60 FLAT The sink is reversible For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 60 cm Minimum thickness of the countertop when placed with a dishwasher: at least 4 cm Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink inclusive Waste system basket strainer 1.063, , F XX Sink inclusive Waste system pop-up 1.150, ,00 Classicline CeramicPlus Premiumline CeramicPlus alpin 51 Coral 50 Emerald 26 Midnight White 07 Sunrise FLUSH-MOUNTED SINKS Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Universal cutting board walnut 159, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100! 59

60 SILUET 50 FLAT The sink is reversible For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 50 cm Minimum thickness of the countertop when placed with a dishwasher: at least 3 cm Steamer container 1/3 compatible with salad basket Material: TitanCeram Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink inclusive Waste system basket strainer 960, , F XX Sink inclusive Waste system pop-up 1.046, ,00 Classicline CeramicPlus Premiumline CeramicPlus FLUSH-MOUNTED SINKS alpin White Ref. Optional accessories / spare parts K11 00 K1 Salad basket, stainless steel 188,- 9K08 00 K1 Rolling mat, stainless steel 105, K Universal cutting board walnut 159, K1 Steamer container 1/3, stainless steel, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 60 Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100!

61 SUBWAY 50 FLAT Available with bowl on the right or left-hand side For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 50 cm Minimum thickness of the countertop when placed with a dishwasher: at least 4 cm Registered design Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink bowl right inclusive Waste system basket strainer 904, , F XX Sink bowl left inclusive Waste system basket strainer 904, , F XX Sink bowl right inclusive Waste system pop-up 974, , F XX Sink bowl left inclusive Waste system pop-up 974, ,00 Classicline CeramicPlus Premiumline CeramicPlus alpin White FLUSH-MOUNTED SINKS Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 78, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100! 61

62 SUBWAY 50 S FLAT For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 50 cm Minimum thickness of the countertop: at least 3 cm Steamer containers 1/3 and 2/3 compatible with salad basket Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink inclusive Waste system basket strainer 773,00 869, F XX Sink inclusive Waste system pop-up 860,00 956,00 Classicline CeramicPlus Premiumline CeramicPlus 50 Emerald 07 Sunrise FLUSH-MOUNTED SINKS alpin 51 Coral Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel 130,- salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 8K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K1 Steamer container 1/3, stainless steel, K1 Steamer container 2/3, stainless steel 61,- 8K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- 26 Midnight White View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 62 Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100!

63 TIMELINE 50 FLAT The sink is reversible For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 50 cm Minimum thickness of the countertop when placed with a dishwasher: at least 4 cm Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink inclusive Waste system basket strainer 950, , F XX Sink inclusive Waste system pop-up 1.037, ,00 Classicline CeramicPlus Premiumline CeramicPlus 50 Emerald 07 Sunrise alpin 51 Coral Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 26 Midnight White 130, FLUSH-MOUNTED SINKS 8K Universal cutting board walnut 159, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100! 63

64 SILUET 45 FLAT The sink is reversible For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 45 cm Minimum thickness of the countertop when placed with a dishwasher: at least 3 cm Steamer container 1/3 compatible with salad basket Material: TitanCeram Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink inclusive Waste system basket strainer 837,00 9, F XX Sink inclusive Waste system pop-up 923, ,00 Classicline CeramicPlus Premiumline CeramicPlus FLUSH-MOUNTED SINKS alpin White Ref. Optional accessories / spare parts 9K12 00 K1 Salad basket, stainless steel 178,- 9K08 00 K1 Rolling mat, stainless steel 105, K Universal cutting board walnut 159, K1 Steamer container 1/3, stainless steel, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 64 Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100!

65 SUBWAY 45 FLAT Available with bowl on the right or left-hand side For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 45 cm Minimum thickness of the countertop when placed with a dishwasher: at least 4 cm Registered design Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink bowl right inclusive Waste system basket strainer 795,00 894, F XX Sink bowl left inclusive Waste system basket strainer 795,00 894, F XX Sink bowl right inclusive Waste system pop-up 882,00 981, F XX Sink bowl left inclusive Waste system pop-up 882,00 981,00 Classicline CeramicPlus Premiumline CeramicPlus alpin White FLUSH-MOUNTED SINKS Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 130, K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100! 65

66 SUBWAY 45 XS FLAT For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 45 cm Minimum thickness of the countertop: at least 3 cm Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink inclusive Waste system basket strainer 750,00 8, F XX Sink inclusive Waste system pop-up 837,00 929,00 Classicline CeramicPlus Premiumline CeramicPlus 50 Emerald 07 Sunrise FLUSH-MOUNTED SINKS alpin 51 Coral Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 26 Midnight White 130, K Cutting board walnut 138,- 8K Universal cutting board walnut 159, K34 00 K1 Strainer bowl, stainless steel 111,- 9K04 00 K1 Inset strainer, stainless steel 59, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 66 Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100!

67 TIMELINE 45 FLAT The sink is reversible For flush-fit installation in natural stone or artificial stone countertops Minimum width of undersink cabinet: 45 cm Minimum thickness of the countertop when placed with a dishwasher: at least 4 cm Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline F XX Sink inclusive Waste system basket strainer 827,00 931, F XX Sink inclusive Waste system pop-up 914, ,00 Classicline CeramicPlus Premiumline CeramicPlus 50 Emerald 07 Sunrise alpin 51 Coral Ref. Optional accessories / spare parts 8K Accessory set: a universal cutting board made of beech and a stainless steel salad basket 9K08 00 K1 Rolling mat, stainless steel 105,- 26 Midnight White 130, FLUSH-MOUNTED SINKS 8K Universal cutting board walnut 159, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Montage set 18,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. Please refer to the assembly instructions and cut-out dimensions of the countertop on page 100! 67

68 MONUMENTUM Corner element Installation on a corner undersink cabinet with 90 cm side length Minimum width of undersink cabinet: 90 cm 2 basins, closable Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline XX Corner element inclusive Waste system basket strainer and Fastening set 1.693, , XX Corner element inclusive Waste system pop-up and Fastening set 1.763, ,00 Classicline CeramicPlus Premiumline CeramicPlus i2 Cappuccino i5 Sand alpin SM Steam SL Stone White MODULES Ref. Optional accessories / spare parts 8K25 00 K1 Salad basket, stainless steel 129,- 9K08 00 K1 Rolling mat, stainless steel 105,- 8K Waste system basket strainer, chrome 78,- 8K Waste system pop-up without Cover cap 148, L7 Cover cap for double turn lever, round, matt 35, Cover cap for double turn lever, round, chrome 35, L7 Cover cap for double turn lever, angular, matt 35, Cover cap for double turn lever, angular, chrome 35, Fastening set 27,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. The tap holes marked with an o are punched through as standard at the factory. Hole 6 cannot be used for the pop-up waste 68 * unglazed edge Please refer to the assembly instructions

69 DOUBLE-BOWL SINK Assembly on a vanity unit or wall-mounted Minimum width of undersink cabinet: 90 cm 2 basins, closable Compatible with all soap dispensers on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline XX Double-bowl sink inclusive Strainer bowl, Waste system basket strainer and Fastening set for installation with cabinet XX Double-bowl sink inclusive Strainer bowl, Waste system pop-up and Fastening set for installation with cabinet 1.460, , , , , ,00 Classicline CeramicPlus Premiumline CeramicPlus Trendline CeramicPlus i2 Cappuccino i5 Sand alpin KT* Decor white pearl (on the front side) SM Steam * Made to order, delivery time six week plus SL Stone White Ref. Optional accessories / spare parts K1 Salad basket for double-bowl sink 6323, stainless steel 129, K2 Strainer bowl, transparent 47, Waste system basket strainer, chrome 78, Waste system pop-up without Cover cap 148, MODULES L7 Cover cap for double turn lever, round, matt 35, Cover cap for double turn lever, round, chrome 35, L7 Cover cap for double turn lever, angular, matt 35, Cover cap for double turn lever, angular, chrome 35, Fastening set for installation with cabinet 43, Fastening set for wall-mounting without cabinet 122,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. * unglazed edge Please refer to the assembly instructions 69

70 SINGLE-BOWL SINK Assembly on a vanity unit or wall-mounted Minimum width of undersink cabinet: 60 cm Compatible with the soap dispenser on page 86 Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline XX Single-bowl sink inclusive Waste system basket strainer and Fastening set for installation with cabinet 8,00 9, , XX Single-bowl sink inclusive Waste system pop-up and Fastening set for installation with cabinet 929, , ,00 Classicline CeramicPlus Premiumline CeramicPlus Trendline CeramicPlus i2 Cappuccino i5 Sand alpin KT* Decor white pearl (on the front side) SM Steam * Made to order, delivery time six week plus SL Stone White MODULES Ref. Optional accessories / spare parts 9K08 00 K1 Rolling mat, stainless steel 105, Waste system basket strainer, chrome 61, Waste system pop-up without Cover cap 148, L7 Cover cap for turn lever, round, matt 35, Cover cap for turn lever, round, chrome 35, L7 Cover cap for turn lever, angular, matt 35, Cover cap for turn lever, angular, chrome 35, Fastening set for installation with cabinet 43, Fastening set for wall-mounting without cabinet 122,- View of holes for tap fittings When ordering, please specify the tap hole you would like us to drill for you, by using tap hole reference number (see page 2). Diameter: ca. 35 mm Additional charge: 9,00 /model. 70 * unglazed edge Please refer to the assembly instructions

71 CERAMIC SINKS WITHOUT WASTE SYSTEMS Ref. Description (for XX, please enter colour number) Classicline Premiumline Trendline XX Architectura 50, Sink 547,00 618, XX Architectura 60 XR, Sink 597,00 676, XX Architectura 60, Sink 630,00 713, XX Arena Corner, Corner sink with additional outlet in the draining board 1.041, , XX Cisterna 26, Undercounter sink 406,00 456, XX Cisterna 45, Undercounter sink 614,00 695, XX Cisterna 50, Undercounter sink 644,00 729, XX Cisterna 60B, Undercounter sink 649,00 735, XX Cisterna 60C, Undercounter sink 701,00 795, XX Condor 45, Sink 629,00 712, XX Condor 50, Sink 737,00 836, XX Condor 60, Sink 844,00 959, XX Condor 80, Sink 1.117, , XX Double-bowl sink, Double-bowl sink 1.293, , , XX Flavia 45, Sink 669,00 758, XX Flavia 50, Sink 794,00 902, XX Flavia 60, Sink 909, , XX Monumentum, Corner element 1.589, , XX NewWave 60, Sink 895, , F XX Siluet 45 flat, Sink 778,00 883, XX Siluet 45, Sink 706,00 801, F XX Siluet 50 flat, Sink 901, , XX Siluet 50, Sink 818,00 930, F XX Siluet 60 flat, Sink 1.016, , XX Siluet 60, Sink 925, , XX Single-bowl sink, Single-bowl sink 739,00 839,00 905, XX Solo Corner, Corner sink 875,00 995, XX Subway 45 Compact, Sink bowl left 610,00 690, XX Subway 45 Compact, Sink bowl right 610,00 690, F XX Subway 45 flat, Sink bowl left 735,00 834, F XX Subway 45 flat, Sink bowl right 735,00 834, XX Subway 45 SU, Undercounter sink 608,00 688, F XX Subway 45 XS flat, Sink 690,00 782, XX Subway 45 XS, Sink 612,00 693, XX Subway 45, Sink bowl left 624,00 706,00 761, XX Subway 45, Sink bowl right 624,00 706,00 761, F XX Subway 50 flat, Sink bowl left 827,00 940, F XX Subway 50 flat, Sink bowl right 827,00 940, F XX Subway 50 S flat, Sink 713,00 809, XX Subway 50 S, Sink 631,00 714, XX Subway 50 SU, Undercounter sink 619,00 701, XX Subway 50, Sink bowl left 733,00 832,00 897, XX Subway 50, Sink bowl right 733,00 832,00 897, F XX Subway 60 flat, Sink bowl left 944, , F XX Subway 60 flat, Sink bowl right 944, , F XX Subway 60 S flat, Sink 803,00 912, XX Subway 60 S, Sink 720,00 817, XX Subway 60 SU, Undercounter sink 763,00 866, F XX Subway 60 XL flat, Sink bowl left 900, , F XX Subway 60 XL flat, Sink bowl right 900, , XX Subway 60 XL, Sink bowl left 829,00 9, , XX Subway 60 XL, Sink bowl right 829,00 9, , F XX Subway 60 XM flat, Sink 814,00 925, XX Subway 60 XM, Sink 740,00 840, F XX Subway 60 XR flat, Sink bowl left 945, , F XX Subway 60 XR flat, Sink bowl right 945, , XX Subway 60 XR, Sink bowl left 890, , , XX Subway 60 XR, Sink bowl right 890, , , XX Subway 60 XU, Undercounter sink 756,00 858, XX Subway 60, Sink bowl left 843,00 958, , XX Subway 60, Sink bowl right 843,00 958, , XX Subway 80, Sink 1.133, , F XX Timeline 45 flat, Sink 767,00 871, XX Timeline 45, Sink 683,00 774,00 835, F XX Timeline 50 flat, Sink 890, , XX Timeline 50, Sink 792,00 900,00 971, XX Timeline 60, Sink 895, , ,00 71

72 TAP FITTINGS ADVANTAGES INTELLIGENT DETAILS FOR SOPHISTICATED KITCHENS Ranging from traditional to modern, Villeroy & Boch premium tap fittings are available in a wide variety of styles. Perfectly matched to the design of your kitchen sink, they offer maximum functionality and perfect comfort for every room. Discover the many advantages of our tap fitting series and benefit from our unique quality. COLOURFUL DESIGNS Our tap fittings are perfectly matched to the kitchen sinks. 14 lightfast colours are available for selected collections and add the finishing touch to a harmonious colour scheme. TAP FITTINGS HIGH-QUALITY MATERIAL Thanks to premium stainless steel, the tap fittings are more robust, rust-proof, easy to clean, lead-free and durable. The components inside are sourced from European market leaders. MAXIMUM COMFORT Additional functions, such as a retractable spray head, different types of water jet and low-pressure solutions, offer maximum comfort in everyday use. OPTIMUM INSTALLATION Solutions for installation directly in front of the window and external connectors ensure quick and easy installation in every situation. 72

73 ALORO / AVIA Aloro Ref. Description L0 Platin 599, L2 Black 599,- Avia Ref. Description LC stainless steel 454, LE stainless steel polished 454,- TAP FITTINGS Mix of anodised aluminium, zamak and stainless steel Cartridge material: ceramic Swivel range: 110 Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 7,0 l/min Flexible connection hoses, length 600 mm Material: solid stainless steel Cartridge material: ceramic Swivel range: 360 Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 13,0 l/min Flexible connection hoses, length 500 mm 73

74 COMO / COMO SHOWER Como Ref. Description LC stainless steel 298, LE stainless steel polished 298, XX ceramic colours, colour selection see below 418,- Como Shower Ref. Description LC stainless steel 398, XX Body: stainless steel Spray: ceramic colours, colour selection see below LE stainless steel polished 398,- 454,- Colour selection (for XX, please enter colour number) Classicline CeramicPlus i2 Cappuccino i5 Sand alpin Premiumline CeramicPlus TAP FITTINGS SM Steam SL Stone White Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 14,0 l/min Flexible connection hoses, length 500 mm Material: solid stainless steel Hand-spray fitting: integrated, retractable Swivel range: 120 Hose length of hand-held spray head: 102 cm Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 11,0 l/min Flexible connection hoses, length 500 mm 74

75 COMO SKY / COMO SHOWER SKY Como Sky Ref. Description LC stainless steel 399, LE stainless steel polished 399,- Como Shower Sky Ref. Description LC stainless steel 493, LE stainless steel polished 493,- TAP FITTINGS Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 100 Flow volume: 8,0 l/min Flexible connection hoses, length 500 mm Adjustable aerator Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 100 Flow volume: 8,0 l/min Flexible connection hoses, length 500 mm Adjustable aerator Hose length of hand-held spray head: 180 cm Hand-spray fitting: integrated, retractable 75

76 COMO SWITCH / COMO WINDOW / COMO SHOWER WINDOW Como Switch Ref. Description LC stainless steel 484, LE stainless steel polished 484,- Como Window Ref. Description LC stainless steel 359,- Como Shower Window Ref. Description LC stainless steel 479,- TAP FITTINGS Material: solid stainless steel Hand-spray fitting: integrated, retractable Swivel range: 120 Hose length of hand-held spray head: 150 cm Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 8,0 l/min Flexible connection hoses, length 500 mm Can be switched from water flow to spray Material: solid stainless steel Cartridge material: ceramic Swivel range: 120 Opening angle of lever: 25 Mixing angle of lever: 90 Flexible connection hoses, length 75 cm Flow volume: 12,0 l/min Height of base with extended tap fitting: 35 mm Material: solid stainless steel (head and holder) Cartridge material: ceramic Swivel range: 120 Opening angle of lever: 25 Mixing angle of lever: 90 Flexible connection hoses, length 75 cm Flow volume: 8,0 l/min Height of base with extended tap fitting: 35 mm Retraction of spray head by means of hose weight Hand-spray fitting: integrated, retractable 76

77 COMO X Como X Ref. Description LC stainless steel 403, Material: solid stainless steel Cartridge material: ceramic Swivel range: 360 Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 9,0 l/min Flexible connection hoses, length 500 mm Kitchen tap equipped with an integrated pop-up turn knob Opening / closing the pop-up waste with the ring on the tap No tap hole on the sink required for the pop-up turn knob Please order a sink with a pop-up waste system TAP FITTINGS 77

78 COSI / COSI SKY Cosi Ref. Description LC stainless steel 306, LE stainless steel polished 306,- Cosi Sky Ref. Description LC stainless steel 409, LE stainless steel polished 409,- TAP FITTINGS Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 12,0 l/min Flexible connection hoses, length 500 mm Adjustable aerator Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 12,0 l/min Flexible connection hoses, length 500 mm Adjustable aerator 78

79 FINERA / FINERA SQUARE Finera Ref. Description LC stainless steel 9,- Finera Square Ref. Description LC stainless steel 9,- TAP FITTINGS Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 10,0 l/min Flexible connection hoses, length 400 mm Adjustable aerator Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 10,0 l/min Flexible connection hoses, length 400 mm Adjustable aerator 79

80 FINERA SLOPE / FINERA SQUARE SLOPE Finera Slope Ref. Description LC stainless steel 9,- Finera Square Slope Ref. Description LC stainless steel 9,- TAP FITTINGS Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 10,0 l/min Flexible connection hoses, length 400 mm Adjustable aerator Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 10,0 l/min Flexible connection hoses, length 400 mm Adjustable aerator 80

81 MODERN STEEL / PRIMARA Modern Steel Ref. Description LC stainless steel 498, LE stainless steel polished 498,- Primara Ref. Description LC stainless steel 456,- TAP FITTINGS Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 14,0 l/min Flexible connection hoses, length 500 mm Material: solid stainless steel Can be switched from water flow to spray Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flexible connection hoses, length 500 mm Flow volume: 11,0 l/min Swivel range: 110 Hand-spray fitting: integrated, retractable Hose length of hand-held spray head: 105 cm 81

82 SORANO / SORANO SHOWER Sorano Ref. Description LC stainless steel 309,- Sorano Shower Ref. Description LC stainless steel 409,- TAP FITTINGS Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 9,0 l/min Flexible connection hoses, length 500 mm Adjustable aerator Material: solid stainless steel Hand-spray fitting: integrated, retractable Swivel range: 360 Hose length of hand-held spray head: 102 cm Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 9,0 l/min Flexible connection hoses, length 500 mm Adjustable aerator 82

83 SORANO SKY / SORANO SKY SHOWER Sorano Sky Ref. Description LC stainless steel 394,- Sorano Sky Shower Ref. Description LC stainless steel 486,- TAP FITTINGS Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 9,0 l/min Flexible connection hoses, length 500 mm Adjustable aerator Material: solid stainless steel Hand-spray fitting: integrated, retractable Swivel range: 360 Hose length of hand-held spray head: 102 cm Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 9,0 l/min Flexible connection hoses, length 500 mm Adjustable aerator 83

84 STEEL EXPERT / STEEL SHOWER Steel Expert Ref. Description LC stainless steel 589,- Steel Shower Ref. Description LC stainless steel 559,- TAP FITTINGS Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 6,5 l/min Flexible connection hoses, length 500 mm Flexible, removable, hand-held spray head Can be switched from water flow to spray Material: solid stainless steel Hand-spray fitting: integrated, retractable Swivel range: 360 Hose length of hand-held spray head: 70 cm Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 11,0 l/min Flexible connection hoses, length 500 mm 84

85 UMBRELLA / UMBRELLA FLEX Umbrella Ref. Description LC stainless steel 409, LE stainless steel polished 409,- Umbrella Flex Ref. Description LC stainless steel 496, LE stainless steel polished 496,- TAP FITTINGS Material: solid stainless steel Swivel range: 360 Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 14,0 l/min Flexible connection hoses, length 500 mm Material: solid stainless steel Hand-spray fitting: integrated, retractable Swivel range: 360 Hose length of hand-held spray head: 60 cm Cartridge material: ceramic Opening angle of lever: 25 Mixing angle of lever: 90 Flow volume: 11,0 l/min Flexible connection hoses, length 500 mm 85

86 SOAP DISPENSER Soap dispenser Ref. Description LC stainless steel 129, LE stainless steel polished 129,- Soap dispenser Ref. Description LC stainless steel 149,- Soap dispenser Ref. Description LC stainless steel 159,- TAP FITTINGS Material: solid stainless steel (head and holder) Filling quantity: 250 ml Material: stainless steel (head), plastic (holder) Filling quantity: 250 ml Material: stainless steel (head), plastic (holder) Filling quantity: 250 ml 86

87 HIGH QUALITY ACCESSORIES FROM VILLEROY&BOCH In hardly any other room of the house are materials subjected to the stresses found in the kitchen. That s why Villeroy & Boch has extremely strict standards for the quality of the materials it uses. Work s more fun with the right equipment: So customise your sink to suit your requirements by adding accessories such as wire baskets or strainers, hanging bowls or chopping boards. This makes it possible to better coordinate each step of the process. Stainless steel hanging bowl and walnut (real-wood veneer with compact core) cutting board complement each other to perfection for even greater comfort when preparing food. Roll-up rack made of stainless steel convenient for draining dishes. Cap waste cover made of stainless steel Attractive cap waste cover, can be used in any Villeroy & Boch sink, dishwasher-safe. Inset strainer made of stainless steel Practical when preparing and cooking food. Wire basket made of stainless steel Practical protection when doing the dishes. Universal cutting board Stays in place for comfortable working at the sink, draining board or worktop. SPARE PARTS Square and round pop-up wastes Designed to match your tap fittings and available in both a matt and high-gloss finish. Selection of stainless steel soap dispensers Elegant solution for soap or washing-up liquid. 87

88 ACCESSORIES Cap waste cover Reference universally applicable LC 32,- Rolling mat, stainless steel universally applicable 9K08 00 K1 105,- Universal cutting board made of beech For sinks: 3304, 3305, 3306, 3307, 3309, 3312, 3313, 3315, 3350, 3360, 3365, 6712, 6713, 6714, 6718, 6719, 6720, 6721, 6726, 6732, 6745, 6746, 6759, 6770, 6772, 6773, 6778, 6780, 6781, 6790, K , Universal cutting board walnut For sinks: 3304, 3305, 3306, 3307, 3309, 3312, 3313, 3315, 3350, 3360, 3365, 6712, 6713, 6714, 6718, 6719, 6720, 6721, 6726, 6732, 6745, 6746, 6759, 6770, 6772, 6773, 6778, 6780, 6781, 6790, 6791, 3336, 3335, K , Cutting board walnut For the Subway sinks: 3309, 3312, 3313, 3315, 6712, 6713, 6714, 6718, 6719, 6720, 6721, 6770, 6772, 6773, 6780, K ,- Steamer container 1/3, stainless steel For sinks: 3336, 3335, 3334, 3315, 6758, K1, SPARE PARTS Steamer container 2/3, stainless steel For sinks: 3336, 3315, K1 61, Strainer bowl, stainless steel For sinks: 3309, 3312, 3313, 3315, 6712, 6713, 6714, 6718, 6719, 6720, 6721, 6770, 6772, 6773, 6780, K34 00 K1 111,- 88

89 ACCESSORIES Inset strainer, stainless steel Reference For sinks: 3309, 3312, 3313, 3315, 6712, 6713, 6714, 6718, 6719, 6720, 6721, 6770, 6772, 6773, 6780, K04 00 K1 59, Inset strainer, stainless steel For sinks: 3350, 3360, 3365, 6726, 6732, 6745, 6746, 6759, K1 116, Strainer bowl, stainless steel For sinks: 3305, K24 00 K1 90,- Strainer bowl, stainless steel For sinks: K23 00 K1 111,- Cover cap for turn lever, round matt L7 35,- chrome ,- Cover cap for double turn lever, round matt L7 35,- chrome ,- Cover cap for turn lever, angular matt L7 35,- chrome ,- Cover cap for double turn lever, angular matt L7 35,- chrome ,- SPARE PARTS 89

90 ACCESSORIES Salad basket, stainless steel Reference for Arena Corner K1 129,- for Cisterna 60C 6706, Subway 60 SU K1 129,- for Cisterna 60B 6702, Subway 50 S 3315, Subway 50 S flat 3315, Subway 60 XU K1 129,- for Cisterna , Subway 50 SU K1 129,- for Cisterna , Condor , Subway 45 SU K1 129,- for Architectura 60XR 3365, Condor and Condor K1 129,- for Condor K1 129,- for Flavia K10 00 K1 129,- for Flavia K11 00 K1 129,- for Flavia K17 00 K1 129,- for Monumentum K25 00 K1 129,- for NewWave K1 129,- for Solo Eck K09 00 K1 129,- for Subway K07 00 K1 129,- for Subway /6772, Subway 60 flat 6712/6772, Subway 60 XM 6780, Subway 60 XM flat 6780 for Subway 60 XL 6719/6718, Subway 60 XL flat 6719/6718, Subway 60 S 3309, Subway 60 S flat 3309 for Subway /6773, Subway 50 flat 6713/6773, Subway 60 XR 6721/6720, Subway 60 XR flat 6721/6720 for Subway /6772, Subway 45 flat 6714/6772, Subway 45 XS 6781, Subway 45 XS flat 6781, Subway 45 Compact 3313/3312 8K04 00 K1 129,- 8K31 00 K1 129,- 8K05 00 K1 129,- 8K06 00 K1 129,- for double-bowl sink K1 129,- for Timeline , Timeline 60 flat, Architectura K12 00 K1 129,- for Timeline , Timeline 50 flat 3307, Architectura K09 00 K1 129,- for Timeline , Timeline 45 flat K13 00 K1 129,- for Siluet , Siluet 60 flat K10 00 K1 198,- for Siluet , Siluet 50 flat K11 00 K1 188,- for Siluet , Siluet 45 flat K12 00 K1 178,- SPARE PARTS Mounting kit for single-bowl sink without draining board ,- 90

91 SPARE PARTS FOR TAP FITTINGS Tap handle for Aloro Reference chrome ,- Tap handle for Como Shower / Como Window / Como Window Shower / Como / Como X / Como Switch / Como Sky / Como Shower Sky stainless steel massive LC 72,- stainless steel massive polished LE 72,- ceramic colours XX 119,- Tap handle for Finera / Finera Slope stainless steel massive LC 69,- Tap handle for Finera Square / Finera Square Slope stainless steel massive LC 69,- Tap handle for Primara stainless steel massive LC 69,- Tap handle for Sorano / Sorano Shower / Sorano Sky / Sorano Sky Shower stainless steel massive LC 70,- Tap handle for Steel Expert stainless steel massive LC 72,- Tap handle for Steel Shower / Modern Steel stainless steel massive LC 69,- stainless steel massive polished LE 69,- Tap handle for Umbrella / Umbrella Flex stainless steel massive LC 69,- stainless steel massive polished LE 69,- Spray for Como Shower / Como Shower Window / Como Shower Sky stainless steel massive LC 94,- stainless steel massive polished LE 94,- ceramic colours XX 94,- SPARE PARTS Spray for Como Shower Style stainless steel massive LC 69,- stainless steel massive polished LE 69,- 91

92 SPARE PARTS FOR TAP FITTINGS Spray for Primara Reference stainless steel massive LC 120,- Spray for Sorano Shower / Sorano Sky Shower stainless steel massive LC 94,- Spray for Steel Shower stainless steel massive LC 83,- Spray for Umbrella Flex stainless steel massive LC 69,- stainless steel massive polished LE 69,- Showerhead for Como Switch stainless steel massive LC 120,- stainless steel massive polished LE 120,- Showerhead for Steel Expert stainless steel massive LC 100,- Controll box for Como X ,- SPARE PARTS 92

93 CARE INSTRUCTIONS Care instructions Easy-care beyond compare You have chosen a quality product from Villeroy & Boch the perfect solution for kitchens with character. Ceramic is a natural material that harmonises with all materials in the kitchen. The numerous advantages of ceramics that arise from the interplay between carefully selected raw materials and state-of-the-art production technology will already be familiar to you from other areas, such as tableware, tiles and bathroom ceramics. Villeroy & Boch has managed to further improve the outstanding properties of this material: CeramicPlus, the ceramic material with the unique easy-care surface that simply stays cleaner. It is so smooth that there are hardly any places where water and dirt can cling, so they drain away immediately. Even most stubborn stains, such as from tea, beetroot or red wine, and lime scale can be easily removed. It s a real help in the kitchen, because it means less work and less cleaning agents are required. And it s not a miracle but the result of our 270 years of experience with ceramics. Various tests simulating long-term use have demonstrated CeramicPlus s lasting resistance to soiling (when the care instructions are duly observed). The high quality and outstanding properties of CeramicPlus have also been confirmed in tests carried out by the independent IST Fraunhofer Institut in Braunschweig. In addition, the material properties are also systematically tested and monitored in the Villeroy & Boch laboratory. With the purchase of this product made from CeramicPlus as with all products from Villeroy & Boch you are getting an item of impeccable quality. We hope that your easy-care ceramics will give you a lot of pleasure. Cleaning and care of your kitchen ceramics With its innovative new surface, CeramicPlus sets new standards in hygiene and ease of care. Now, scrubbing, scouring and scratching are a thing of the past. All it takes is a regular wipe with a soft, damp cloth and a mild cleaning agent. To ensure that the easy-care properties of your kitchen ceramics last as long as possible while allowing you to fully benefit from the many advantages offered by CeramicPlus, please observe the following care instructions. Regular care of your kitchen ceramics For regular care of your kitchen ceramics, we recommend always using a soft, non-abrasive sponge or cloth. It is best particularly where limescale is an issue to use a standard washing-up liquid or a vinegar-based cleaning agent (e.g. Frosch Vinegar cleaner from Erdal Rex). Dealing with heavier soiling Below you will find a few examples of cleaning agents that, when used in accordance with the manufacturers recommendations, will help preserve the quality of your kitchen ceramics over the long term. Because kitchen ceramics are harder than metal, metallic items can occasionally leave marks on ceramic surfaces. Marks of this kind should only be removed using one of the mild cleaning agents listed in the table. Applications (according to manufacturer s recommendations) Regular cleaning and care Anorganic dirt (e.g. limescale) Grease Examples All-purpose cleaners, e.g.: Viss kitchen cleaner (Lever), Der General Professional (Henkel) Vinegar-based cleaners, e.g.: Frosch Vinegar cleaner (Erdal Rex), all commercial washing-up liquids Lime dissolvers, e.g.: Sidol anti-limescale (Henkel), Viakal (Procter & Gamble) Vinegar-based cleaners, e.g.: Frosch Vinegar cleaner (Erdal Rex) Grease remover, e.g.: Sidol kitchen cleaner (Henkel) Vinegar-based cleaners, e.g.: Frosch Vinegar cleaner (Erdal Rex) Your attention is particularly drawn to the fact that aggressive cleaning agents (see below) can scratch ceramic surfaces and can harm or (if used regularly) even destroy the special properties of CeramicPlus. Scouring creams or powders Concentrated drain cleaners Tap and steel cleaners For this reason we recommend avoiding the use of these cleaning agents completely. If on occasion it should be necessary to use drain cleaning chemicals or metal cleansers, direct contact with the kitchen ceramics should be avoided. Thanks to the exceptional easy-care properties of CeramicPlus, you will achieve fresh cleanliness and optimum hygiene without the need for aggressive wcleaning agents. INSTALLATION INSTRUCTIONS * The care instructions can also be ordered for customers under article number 9211 J6 A1. 93

94 INSTRUCTIONS FOR SURFACE-MOUNTED INSTALLATION Sinks Ref. Countertop cutout ARCHITECTURA x 48.0 cm ARCHITECTURA x 48.0 cm ARCHITECTURA 60 XR x 48.0 cm ARENA Corner 6729 see attached template (Ref A0) CONDOR x 47.0 cm CONDOR x 47.0 cm CONDOR x 47.0 cm CONDOR x 47.0 cm FLAVIA x 48.0 cm FLAVIA x 48.0 cm FLAVIA x 48.0 cm NEW WAVE see attached template (Ref B2 A5) SILUET x 48.0 cm SILUET x 48.0 cm SILUET x 48.0 cm SOLO Corner 6708 see attached template (Ref B3 A5) SUBWAY / x 48.0 cm SUBWAY 45 Compact 3313/ x 48.0 cm SUBWAY / x 48.0 cm SUBWAY 50 S x 48.0 cm SUBWAY / x 48.0 cm SUBWAY 60 XL 6719/ x 48.0 cm SUBWAY x 48.0 cm SUBWAY XM x 48.0 cm SUBWAY 60 XR 6721/ x 48.0 cm SUBWAY XS x 48.0 cm SUBWAY 60 S x 48.0 cm TIMELINE x 48.0 cm TIMELINE x 48.0 cm TIMELINE x 48.0 cm Knocking out the tap holes PLEASE NOTE Examine the sink for damage BEFORE INSTALLATION. Only install a sink that is in perfect condition. IMPORTANT! Always wear protective goggles and suitable protective clothing when knocking out the tap hole! INSTALLATION INSTRUCTIONS BEFORE INSTALLATION knock out the taps holes required as follows: Carefully transfer the centre of the tap hole required from the lower side of the sink onto the glazed upper side and mark. Only ever knock a tap hole through from the GLAZED UPPER SIDE OF THE SINK, NEVER FROM THE LOWER SIDE! Use suitable tools (e.g. hammer and centre punch) to knock the pre-punched tap hole out from above. Position the punch initially in the centre of the tap hole. Then widen to the diameter required.please be very careful not to damage the glaze around the tap hole. 94

95 INSTRUCTIONS FOR SURFACE-MOUNTED INSTALLATION Installation of surface-mounted sinks with the option of dismantling without causing any damage A Carefully pierce the required tap holes from the glazed side (!) using a hammer and, if necessary, a punch. B Cut hole in worktop as required or using the template supplied. Clean the cut-out edge and remove any shavings. C Insert and align sink. D Remove sink. Fix EPDM foam tape all around the outer contour of the sink, 5 mm from the cutting edge. Only fix the foam tape to the work surface, not to the sanded rim of the sink!! Draw around the outer contour of the sink on the worktop. F Seal cleaned cut-out edge with silicon, fill Apply a layer of silicon (approx. 10 mm thick) to the worktop area that is to support the sink and (!) to the EPDM foam tape* E Remove the outline of the sink drawn onto the worktop, clean the edge of the sink. *Please note the product information and the instructions for use on the packaging. G Insert and align sink. H Remove any excess silicon. Connect supply and drain lines. INSTALLATION INSTRUCTIONS In order for Villeroy & Boch to be liable, the product must be installed in accordance with the installation instructions for allowing the option of dismantling without causing any damage (assembly set ). 95

96 INSTALLATION INSTRUCTIONS Installation Instructions Monumentum 3303 Installation Instructions Ceramic Sinks 6320 / 6323 Please note: In order to ensure that any concealed damage caused in transit is identified in good time, the ceramic elements should be examined prior to installation. When installing ON METAL CONSOLES, the contact surface on the wall must be level and able to withstand pressure. The load-bearing capacity of the bathroom fitting is dependent on the stability of the wall to which it is attached. Plasterboard and similar boarding are thus only permissible when used in conjunction with suitable bearing elements. When installing ON A CABINET, a suitable cabinet construction is required. The installation instructions have been carefully drawn up in accordance with the latest knowledge available. Please read them carefully prior to commencing installation work. Misunderstandings or errors resulting from changes to models of which the installer may not be aware may lead to incorrect installation. Particularly when larger building projects or series installation work are involved, we therefore recommend you obtain confirmation from our company that the stated installation dimensions are still valid, or carry out a comparison with an article from our current production output. The advice on installation provided in our literature, written instructions for installation and verbal advice provided by our staff do not establish a legal relationship. We reserve the right to carry out modifications to products in the interests of technical improvement. INSTALLATION INSTRUCTIONS 96

97 INSTALLATION INSTRUCTIONS BUTLER AND FARMHOUSE SINKS Installation Instructions Butler and Farmhouse sinks Ceramic sink 6320 (installing on metal consoles) Installation Instructions Butler and Farmhouse sinks Ceramic sink 6320 (installing on a cabinet) INSTALLATION INSTRUCTIONS 97

98 INSTALLATION INSTRUCTIONS BUTLER AND FARMHOUSE SINKS Installation Instructions Butler and Farmhouse sinks Ceramic sink 6323 (installing on metal consoles) Installation Instructions Butler and Farmhouse sinks Ceramic sink 6323 (installing on a cabinet) INSTALLATION INSTRUCTIONS 98

99 INSTALLATION INSTRUCTIONS CISTERNA&SUBWAY Cisterna and Subway Undercounter sinks (6702, 6703, 6704, 6706, 6707, 6758, 3310, 3324, 3325) Instructions for installation in natural stone slabs (e.g. granite) with a minimum thickness of 25 mm. We recommend the use of cementing materials specifically intended for natural stone. Please follow the manufacturer s instructions. Installation accessories applied: 6 fastening brackets, 6 M5 x 35 screws, 6 M5 x 30 screws, 6 MS dowels 1. Determine where the sink is to be positioned on the slab and cut out the hole according to the template. Lay the slab face down on an absolutely plane and true, stable surface. Make sure that all surfaces top be cemented are free of grease and otherwise clean and dry. Apply silicone rubber to the ground rim of the sink. Lay the sink over the hole in the slab and align. Remove any excess sealant. 2. Mark drilling holes on the slab at approx. 10 mm from the outer edge of the sink. Ensure that the sink and brackets fit into the cabinet used. Using a 6 mm carbide drill, drill the holes (without using the percussion feature). Using a 6 mm carbide drill, drill the holes (without using the percussion feature) to 18 mm, not counting the tip, preferably using a depth gauge attachment). 3. Insert the MS special dowels enclosed flush into the holes. Attach the fastening brackets with the screws supplied to the sink and slab. Tighten the screws by hand with a screwdriver. (Do not use a torque lever). The cut-out dimensions include allowances for ceramic tolerances and a safety margin. In certain cases the countertop may therefore jut over the rim of the washbasin by up to 11 mm (7 mm on 6705). This overhang can be minimised by producing the cut-out according to the contours of the washbasin concerned, thereby observing the ceramic tolerances. When producing the cut-out by means of the template: Recommended distance between edge of cut-out and centre of tap fitting hole: approx. 75 mm We reserve the right to make technical alterations. INSTALLATION INSTRUCTIONS 99

100 INSTALLATION INSTRUCTIONS FOR FLUSH-FIT SINKS Recommendations for installation of flush-fit sinks in natural stone worktops, minimum thickness 4 cm. The installation kit can also be ordered for customers under article number Natural stone worktop 2 Sink 3 Natural stone-silicone jointing compound (Note recommendations by supplier/manufacturer of natural stone) 4 Levelling compound (enclosed) 5 Use enclosed wood spacers and/or levelling compound under sink for levelling purposes Reference point cutout dimension a, b Reference point cutout dimension a1, b1 Coutout dimension: Sinks Ref. a (mm) b (mm) a1 (mm) b1 (mm) C (mm) Siluet 60 Flat F reversible Siluet 50 Flat F reversible Siluet 45 Flat 334 0F reversible Subway 60 Flat F X Subway 60 Flat F X Subway 60 XL Flat F X Subway 60 XL Flat F X Subway 60 XR Flat F X Subway 60 XR Flat F X Subway 50 Flat F X Subway 50 Flat F X Subway 45 Flat F X INSTALLATION INSTRUCTIONS Subway 45 Flat F X Subway 60 S Flat F X Subway 60 XM Flat F X Subway 45 XS Flat F X Subway 50 S Flat F X Timeline 60 Flat F reversible Timeline 50 Flat F reversible Timeline 45 Flat F reversible