INDEX INVERTER HYDRAULIC UNIT. Excluded from high-efficiency motor regulations. 7 MPa. 10 MPa. 16 MPa. 21 MPa. List of Hybrid Hydraulic Unit Models

Transcription

1 INDEX INVERTER HYDRAULIC UNIT Excluded from high-efficiency motor regulations List of Hybrid Hydraulic Unit Models P. to List of Super Unit Models Nomenclature P. Main Features and Functions Super Unit Hydraulic Circuits P.6 Features P. to Functions P.9 Function Option P.0 Hardware Option P. to Pressure Flow Rate Characteristics (Typical) P. to Specifications/External Dimension Diagram P. to Specifications/External Dimension Diagram P. to Specifications/External Dimension Diagram P.9 to Specifications/External Dimension Diagram P. to Operation Panel P.9 to 0 Electric Wiring P. to Options (Separately available parts) P. to Method of Selection P.9 Handling P.0 MPa 0 MPa 6 MPa MPa Oil Hydraulic Division Oil Hydraulic Equipment

2 Get more than energy savings!! Saving energy is essential. However, the Daikin hydraulic system goes one step further than conventional models. 0

3 Combining Daikin s original high-efficiency IPM motors and hydraulic technology enables an unparalleled energy-saving effect and advanced functions. Energy-saving technology that supports hybrid products Daikin was the first in the industry to introduce an interior permanent magnet synchronous motor (IPM motor) into air conditioners for household use. Daikin was also an early adopter in the industry of the IPM motor for use in industrial-use air conditioners. We have led the industry as a front runner in air conditioner energy-saving performance. Hybrid products equipped with variable speed motors, developed by making full use of Daikin s original energy-saving motor technology and its production capacity, help to achieve Powerful energy savings for factory equipment Double torque improves the energy-saving effect. Combining two rotational forces, magnetic torque generated by a powerful neodymium magnet and reluctance torque, generates more power with less electricity. Neodymium magnet Ferrite magnet Neodymium magnets provide more power substantially more than the ferrite magnets in general use. neodymium magnets, the key to this improved energy-saving effect! : A compound of neodymium (Nd, rare-earth element), iron (Fe), and boron (B). Neodymium magnets are known to have superior magnetic properties. : Rotational force generated by attractive force (reluctance = magnetic resistance) between iron and a magnet. Fundamental Principle of the IPM Motor With a rare-earth permanent magnet deeply embedded in the rotor, the IPM motor uses an electromagnetic structure that maximizes magnetic torque (attractive/repulsive force between the coil and permanent magnet) and reluctance torque (force of the coil that attracts iron). This structure achieves high torque and maximum efficiency while suppressing heat generation. Structure of the IPM motor Stator Structure of a conventional motor (AC servomotor) Iron Stator Rare-earth magnet IPM motor drive system (Interior permanent magnet synchronous motor) S N N S Rotor N [] Comparison of motor efficiency 0 The lengths of the magnetic field lines at the south and north poles are equivalent. Therefore, no reluctance torque that results in rotational force is generated. Daikin IPM motor Rated output (kw) 0 Daikin IPM motors are capable of outputting a large torque in low-speed ranges, eliminating the problems with insufficient torque in low-speed ranges often observed with general-purpose inverters General-purpose induction motor 0 General-purpose induction motor N (Surface permanent magnet synchronous motor: e.g., servomotor, brushless DC motor) N Torque (%) Motor efficiency (%) Daikin IPM motors have even greater efficiency than general-purpose induction motors and high-efficiency induction motors. High-efficiency induction motor S S [] Large torque at low speed 9 SPM motor N S Daikin IPM motor 00 6 Rotor Since the magnetic field lines at the south pole side are made longer than those at the north pole side, the magnetic field lines at the south pole will try to shorten like a stretched rubber band contracts, resulting in rotational force due to reluctance torque in the direction indicated by arrow. S Magnet Rotating magnetic field Rotation speed (min) 0

4 Specifications vary depending on the machine The Daikin product lineup provides various For machine tools discharge rate EcoRich EcoRich R Super EcoRich 0 L/min SUT00S00.0 kw See Pages to 0 L/min SUT00S00 SUT0S00.0 kw See Pages to L/min SUT00S0 SUT06S0.0 kw See Pages 9 to 0 0 L/min SUT00S00 SUT0S00. kw See Pages to L/min SUT00S0. L/min L/min EHU-L0 Equivalent to. kw EHU-M0 Equivalent to. kw EHU-L0. kw EHU-M0. kw EHUR- M0 Equivalent to. kw EHUS- M0R Equivalent to. kw. kw See Pages to 6 SUT0S0 L/min EHU-L0 Equivalent to 0. kw EHUR- M0 SUT00S0 SUT0S0 Equivalent to. kw. kw See Pages to 6 operating pressure MPa 6 MPa MPa MPa MPa MPa 6-pattern PQ control Idling stop Communication function Analog command input 0

5 type. functions and capacities according to the machine type. For general industrial machines Super Unit (high-performance type) discharge rate Super Unit (high-precision type) SUT00D0 P-SUT0DKW.0 kw See Pages to SUT00D0 00 L/min 0 L/min SUT00S00.0 kw SUT00S0 List of Hybrid Hydraulic Unit Models.0 kw See Pages to 6 SUT0D0 SUT6D0 L/min.0 kw SUT00S SUT00D SUT06D SUT0D 0 L/min SUT00S0.0 kw.0 kw See Pages to SUT00D06 SUT06D06 0 L/min.0 kw SUT00S0. kw See Pages to SUT00S0 SUT00S6 L/min SUT00S.0 kw SUT0S0 SUT06S6. kw See Pages to SUT00S0.0 kw See Pages 9 to SUT00S6.0 kw SUT0S0 SUT0S6. kw See Pages to 6. kw See Pages 9 to 0 MPa 6 MPa MPa operating pressure MPa MPa *: The above motor capacities are given for guidance only and do not represent the standard capacities of general motors. *: When selecting a Super Unit, verify the specifications of each model by referring to Pressure Flow rate Characteristics (Typical) on Pages and and How to Select a Super Unit on Page 9. For the purpose of making improvements, the specifications given in this catalog are subject to change without prior notice. Be sure to see the latest model chart. 0

6 List of Super Unit models Selecting the optimum model from a wide variety of Super Unit models Series Motor capacity operating pressure (MPa) flow rate (L/min) Tankless type Unit type Tank capacity (L) Page. kw. kw.0 SUT00S0-.0 SUT00S0- SUT0S0- SUT0S0- to 6. kw.0 SUT00S00- SUT0S00- to.0 kw.0 SUT00S0- SUT06S0-9 to 0 Single pump type.0 kw.0 kw.0 SUT00S00- SUT0S SUT00S00- to to. kw 0.0 SUT00S0- SUT0S0- to 6 Super Unit. kw. kw.0 kw 0.0 SUT00S0-6.0 SUT00S6-6.0 SUT00S6- SUT0S0- SUT0S6- SUT06S6- to 9 to. kw. SUT00D06- SUT06D06- to Double pump type.0 kw.0 kw 0.6 SUT00D- 0.6 SUT00D0- SUT06D- SUT0D- SUT0D0- SUT6D to to 6.0 kw 0.6 SUT00D0- P-SUT0DKW- 00 to Nomenclature. to.0 kw SUT a 0 b S c d 0 e f g h i a Model No. SUT: SUT series b Tank capacity 00: Tankless type 0: L 06: L 0: 00 L 6: L c Pump type D: Double pump type S: Single pump type d Pump discharge rate : L/min : L/min 0: 0 L/min : L/min 0: 0 L/min e operating pressure 0:.0 MPa 0: 0.0 MPa 6:., 6.0 MPa : 0.6 MPa f Design No. Incremented at model changes,... g Function Option C: With communication function (RSC) P: With analog input function h Hardware Option 0 Unit cover (except for L tank) 0 Controller cover (except for kw) 0 DCL (except for kw) 0 Separate power supplies for power system and control system 0 Water fill test compliant tank 06 Water leak test compliant tank 0 Level switch 0 Temperature switch 09 Thermometer 0 Micro separator Combination of to 0 above... i Non-standard No. N: Without control system A: With control system kw SUT a 00 b S c 0 d 0 e f g h a Model No. SUT: SUT series b Tank capacity 00: Tankless type c Pump type D: Double pump type S: Single pump type d Pump discharge rate 0: 0 L/min e operating pressure 0:.0 MPa : 0.6 MPa f Design No. Incremented at model changes,... g Function Option C: With communication function (RSC) P: With analog input function h Non-standard No. N: Without control system A: With control system 0

7 Main features and functions Features Energy-saving Daikin s original energy-saving motor technology utilizing high-efficiency IPM motors provides an energy-saving ratio of 0%. The motor rotation speed control controls the flow rate and pressure of the fixed displacement pump. The highly-efficient motor adopted in this unit achieves energy savings even in applications for general industrial machinery where actuators have high duty ratios. The single pump type is a highly-functional series to make it more useful. The double pump type uses the autonomously-switching, fixed-displacement double pump system, which combines large- and small-capacity pumps in the low pressure, high flow rate range, and autonomously switches to the single operation of the high-pressure, small capacity pump in the high pressure, low flow rate range. In this way, the double pump type ensures a higher energy-saving effect. Low noise Low noise level of db (A) (In the pressure retained operation at 0.6 MPa, with the double pump type unit) Even over the full operation range, noise is less than db (A). By using double phase-differential pumps, the Super Unit reduces pulsation and the noise level. * Data for SUTDL Excluded from high-efficiency motor regulations The Super Units that incorporate a high-efficiency IPM motor are excluded from high-efficiency motor regulations. Restricted oil temperature rise Motor speed control also leads to restriction of the oil temperature rise. The restricted oil temperature rise inhibits deterioration of the hydraulic oil. This also lowers the heat load for air conditioning equipment Fewer control valves required A wide variety of control can be achieved by adjusting parameter settings. Acceleration/deceleration operations that have been accomplished using proportional control valves may be replaced by simply setting the acceleration/deceleration time. Pressure switch may be reduced by using the pressure switch function. (Note that some kinds of control are not applicable depending on the customer s circuit. Care must be taken especially when controlling multiple axes.) List of Super Unit Models, Nomenclature, Main Features and Functions Functions Multi-stage pressure/flow rate control Sixteen pressure (P) - flow rate (Q) setting patterns are available for cylinder control. The proportional control valve and proportional pressure control valve, which are utilized in conventional actuator circuits, can be omitted. The pressure and flow rate can be set using the control unit s operation panel. The pressure and flow rate settings can be selected from among the sixteen patterns using external input signals. The Super Unit autonomously switches between the pressure control and flow rate control modes. Communication function (Available as an option with all models) Remote control and setting changes are possible through RSC serial communication. Using a commercially-available PLC or touch panel display with RSC communication capabilities, parameters for the pressure, flow rate, acceleration time, deceleration time and so on can be set and viewed at the machine. This facilitates control of speeds and pressurizing forces and enables a wide variety of machine operations. Maintenance/Management Function (Hybrid-Win) Internal data of the Super Unit PC tool can be obtained by using PC Supported connected to the unit. The pressure, flow rate, and other internal data of the controller can be monitored and displayed in graph form. This facilitates operation checks during test runs, adjustment of parameters such as time constants, and troubleshooting. The time required for setting can be slashed by editing the parameter settings on the PC and writing them to the unit in a batch. The ability to read and save settings facilitates management. Analog command input (Available as an option with single pump type models) Enables continuous control of pressures and speeds as required. The pressure and flow rate can be controlled continuously at the desired values by inputting the pressure command voltage (0 to 0 V) and flow rate command voltage (0 to 0 V) from the machine side. This achieves a control system with a simple configuration for machinery that requires variable speed control or continuity of pressurizing forces. Super Unit hydraulic circuits (example for the unit type) Single pump type Example with SUT0S0-. Refer to the Instruction Manual for each model for details because the port diameter varies depending on the model. Double pump type Example with SUT06D06-. Refer to the Instruction Manual for each model for details because the circuit configuration varies depending on the model. 6- Hose M C/R P T Optional port DR Rc⅜ Rc Rp⅜ Rp½ Rp¾ M Above oil level 6- Part No. Name Tank Suction strainer Stop valve Oil filler port-cum-air breather Oil level gauge 6- Controller 6- Motor pump incorporating an IPM motor Oil cooler Hose 6- M C/R T P B A P Rc¾ 9 b T Optional port DR Rc Rc¾ Rp⅜ Rp½ Rp¾ P (low pressure) P (high pressure) M Above oil level 6- Part No. Name Tank Suction strainer Stop valve Oil filler port-cum-air breather Oil level gauge 6- Controller 6- Motor pump incorporating an IPM motor Oil cooler Return filter 9 Check valve with holes Hose Hose Rc½ Hose Hose Hose Rc½ 06

8 Features With excellent energy-saving technology, the Super Unit can substantially reduce electricity costs. The control system can be easily upgraded by combining various Super Unit functions. Feature Energy-saving Excellent cost effectiveness with energy-saving ratio of 0% (In pressure retained operation at 0.6 MPa) Through servo control of Daikin s original high-efficiency IPM motor, the Super Unit ensures both a high response speed and stable rotation speed control with fixed-displacement pumps. In pressure holding mode, the Super Unit autonomously reduces the motor rotation speed to the minimum value required to hold the pressure, thus ensuring energy savings of 0% or higher (compared with the conventional Daikin variable piston pump). The Super Unit can even provide an energy-saving effect with general industrial machinery in which actuators provide a high duty ratio, as well as in pressure holding mode. Existing hydraulic unit Super Unit Power consumption (kw) 6 0 Operation time Power consumption (kw) 6 0 Operation time Comparison of annual power consumption Power consumption (kw) 6 0. kwh Existing hydraulic unit.6 kwh Super Unit Power consumption (average during operation) Approx. % reduction Annual energy-saving effect Decreased by $9. ( 9,00) [Estimation conditions] Existing hydraulic unit: double gear pump Model of Super Unit: SUT0D Cost of electricity: /kwh Annual operation time: 000 hours $: 00 POINT The solenoid operated relief valve used in the existing hydraulic unit is eliminated by pressure control with a Super Unit. This results in an approximately % reduction in power consumption. Feature Low noise Low noise level of db (A) (In pressure retained operation at 0.6 MPa, with the double pump type unit) Even over the full operation range, noise is less than db (A). Running the motor at the minimum required rotation speed in pressure holding mode achieves a remarkable noise level reduction. Examples of typical noise levels Ordinary conversation Suburban areas at night Noisy office In a bus or train In a subway train 90 db Full operation Quiet park range Low noise level Double pump type in pressure holding mode at 0.6 MPa Super unit It is generally known that ordinary conversation can be conducted with a person one meter away in an environment at a noise level of db (A). 0

9 Feature Feature Feature Feature 6 Excluded from high-efficiency motor regulations High-efficiency motor regulations came into effect in Japan in April 0. These regulations apply to the hydraulic units equipped with general motors but the Super Units that incorporate a high-efficiency IPM motor are excluded from them. Advantages of using hybrid hydraulic units All models conforming to CE standards Restricted oil temperature rise Improved machining accuracy Reduced thermal distortion improves the machining accuracy. Reduced air-conditioning heat load The reduced heat load on the air conditioner achieves further energy savings. Fewer control valves required Eliminates the need for replacement of motors for each destination Eliminates the need for design changes in accordance with amendments to the regulations Reduces design changes to spare parts, and the maintenance workload All models conform to the machinery directive, EMC directive, and low voltage directive. This facilitates CE approval of the main machine. Restriction of the temperature rise of the hydraulic fluid is one of the effects achieved by adopting Super Units. This generates the following advantages. Extended service life of packing and other sealing materials Improved maintainability Deterioration of the packing and other sealing materials that are made of rubber, used for hydraulic valves and hydraulic cylinders, is restricted. Extended service life of the hydraulic fluid Reduced environmental load and improved maintainability Restricted deterioration of the hydraulic fluid extends its replacement interval. Features Example hydraulic press circuit configuration Reducing the Number of Control Valves by Creating a Software-based System Configuration Throttle valve Elimination of the throttle valve Special spool shockless solenoid valve Standardization of the solenoid valve General-purpose solenoid valve Elimination of the proportional control valve Combination flow/single flow switching valve M Driver Proportional relief valve Control unit M Conventional system configuration Super Unit system configuration 0

10 Functions Function Multi-stage pressure/flow rate control (6 PQ control setting patterns) Featured with standard models The force (pressure) and speed (flow rate) of the actuator (cylinder) can be controlled with 6 pressure (P) and flow rate (Q) setting patterns. The proportional control valve and proportional pressure control valve, which are utilized in conventional actuator circuits, are not required. Once the pressure and flow rate have been set at the controller s operation panel, you can select 6 preset patterns using external input signals. The Super Unit autonomously changes the control mode from flow rate control to pressure control (example: flow rate control is changed to pressure control at the cylinder stroke end). The solenoid valve that actuates the cylinder must be turned ON/OFF at the machine. Smooth changing of force (pressure) and speed (flow rate) Once acceleration time and deceleration time parameters are registered, the force or speed can be changed gradually during a pressure/flow rate setting change. Example of PQ control setting patterns PQ selection 0 PQ selection PQ selection PQ selection PQ Pattern selection: 0 Pressure: MPa PQ Pattern selection: Pressure: MPa PQ Pattern selection: Pressure: MPa PQ Pattern selection: Pressure: MPa Speed (mm/s) Pressurizing force (kn) 0 0 Deceleration low speed Pressurizing force Cylinder speed 00 0 Pressure release* 0 0 Lowered at high speed Pressurizing Raised Meter-in control is (-stage pressuring) performed for pumps PQ Time (sec) PQ selection 0 PQ selection selection PQ selection PQ selection 0 PQ pattern selection *: When pressure release control is disabled, an additional pressure release circuit should be provided for the load side. Function Maintenance/Management function (Hybrid-Win) Featured with standard models PC tool Supported This PC utility reads data from Daikin hybrid systems (Super Unit, EcoRich, oil cooling unit, etc.) and manages it. Parameter setting and monitoring can be accomplished efficiently using the Windows application. Main features Displaying graphs The pressure, flow rate, and other internal data of the controller can be monitored and displayed in graph form. This facilitates operation checks during test runs, adjustment of parameters such as time constants, and troubleshooting. Reading, writing, editing, and saving parameters The time required for setting can be slashed by editing the parameter settings on the PC and writing them to the unit in a batch. The ability to read and save settings facilitates management. Reading and saving the alarm history This function enables quick identification of the parts that require maintenance and reduction of the downtime. The operating time display can serve as the guide for the timing to replace consumable parts or to conduct maintenance. Troubleshooting information including the diagnosis results of the cause of an alarm and action to take can be displayed. Communication cable *: Hybrid-Win is utility software to monitor the internal status of Daikin hybrid systems using a PC. The software and its instruction manual can be downloaded from the website free of charge by completing the user registration process. *: The communication cable is separately available. *: Some models require a dedicated separate monitor harness. *: It is possible to connect to a smart phone or factory LAN by adding an optional WiFi module. This is useful to facilitate the user s daily inspection/maintenance work and for remote monitoring. PC (to be prepared by the customer) Super Unit 09

11 Function Option Optional function C Communication function The Super Unit and main machine can be remotely controlled with the same panel. This function eliminates complicated individual operations and installation space limitations. Remote setting of the operating conditions of the Super Unit enabled Various settings such as acceleration/deceleration time and pressure switch settings, as well as the pressure and flow rate, can be set remotely. This makes it possible to control the hydraulic pressure operating conditions in synchrony with the control of the machine. Managing the pressure and flow rate at the machine The capability to read the operating conditions of the Super Unit makes it possible to display information such as the current pressure and flow rate on the screen at the machine. *: The serial communication interface conforms to the RSC standard. (For RS interfaces, consult Daikin.) Prepare a control unit such as a PLC or touch panel display with the RSC communication function at the machine side. *: For details on the communication procedure, refer to the communication/remove control function instruction manual. Application of Super Unit Remote Operation and Communication Functions Installation in an elevated position or at a distance (within m) Functions Function Option Setting and monitoring P (pressure), Q (flow rate), and other data from the machine control panel Optional function P Analog command input The capability to specify the pressure and flow rate with voltage ranging from 0 to 0 V enables continuous hydraulic control as required. Real-time variation in response to commands facilitates condition settings at the machine side. A hydraulic control system for machinery that requires variable speed control or continuity of pressurizing forces can be realized with a simple configuration. A joystick or trimmer can be connected for real-time control. 0

12 Hardware Option Hardware option 0 Hardware option 0 With unit cover Optionally available for units with tank capacities of L, 00 L, and L (SUT06S6- excluded) The cover protects the controller unit and piping. With controller cover Optionally available for models with motor capacities equivalent to. kw,. kw,. kw, and kw The metal cover protects the controller unit. Example of unit cover installation Example of controller cover installation Hardware option 0 With DCL (DC reactor) Optionally available for models with motor capacities equivalent to. kw,. kw,. kw, and kw Appropriate when it is necessary to improve the power factor or reduce the harmonics of the power supply Optionally available for compact models with the capacity of kw or smaller. Provided as standard for models with a capacity of kw or greater. Hardware option 0 Separate power supplies for power system and control system Optionally available for units with motor capacities equivalent to. kw,. kw,. kw, kw, and kw When an error occurs, only the main power supply is shut down and control power supply continues to carry current, thereby enabling the alarm code and internal status on occurrence of an error to be checked on the operation panel or through serial communication. Hardware option 0 Water fill test compliant tank Hardware option 06 Water leak test compliant tank Optionally available with all unit type models The water fill test, one of the adaptation criteria for the Fire Service Act, and the water leak test, Daikin original standard, are carried out. The tanks that pass the tests have compliance s affixed and are delivered with the certificate. (Water fill test compliant tanks are not equivalent to Fire Service Act compliant tanks.)

13 Hardware option 0 Level switch Hardware option 0 Temperature switch Hardware option 09 Thermometer Hardware option 0 Micro separator Optionally available with all unit type models The accessories that can be fitted to the tank are provided as optional parts. The accessories can be purchased separately as optional parts. (See Page.) List of Models with Options Installed Function Option Hardware Option Pump specifications Motor capacity C P With unit cover (0) With controller cover (0) With DCL (0) Separated power supply for power/ Tank inspection/ control systems (0) unit accessory (*).kw. kw SUT00S0- SUT0S0- SUT00S0- SUT0S0- SUT00S0- SUT0S0- Hardware Option SUT00S00- SUT0S00- Single pump. kw SUT00S0- SUT0S0- SUT00S6- SUT0S6-.0 kw SUT00S6- SUT06S6- SUT00S0- SUT06S0- SUT00S00-.0 kw SUT0S00-. kw SUT00D06- SUT06D06- Double pump.0 kw SUT00D- SUT06D- SUT0D-.0 kw SUT00D0- SUT0D0- SUT6D0- * Tank inspections : Water fill test compliant tank (0), water leak test compliant tank (06) Unit accessories : Level switch (0), temperature switch (0), thermometer (09), microseparator (0) Available Not available

14 Pressure Flow Rate Characteristics (Typical) Single pump type SUTS0, SUTS0, SUTS00, SUTS0, SUTS00, SUTS SUTS SUTS00 Flow rate (L/min) SUTS0 SUTS00 SUTS0 SUTS Pressure (MPa) * Operating flow rate at the maximum pressure in continuous operation: SUTS0: L/min maximum SUTS0: L/min maximum SUTS00: L/min maximum SUTS0: L/min maximum SUTS00: 9 L/min maximum SUTS00: 6 L/min maximum SUTS0, SUTS Flow rate (L/min) SUTS0 SUTS Pressure (MPa) * Operating flow rate at the maximum pressure in continuous operation: SUTS0: L/min maximum SUTS0: L/min maximum SUTS6, SUTS Flow rate (L/min) SUTS6 SUTS Pressure (MPa) * Operating flow rate at the maximum pressure in continuous operation: SUTS6: L/min maximum SUTS6: L/min maximum

15 Double pump type SUTD06 SUTD Flow rate (L/min) 0 0 Flow rate (L/min) Pressure (MPa) * Operating flow rate at the maximum pressure in continuous operation: L/min maximum SUTD Pressure (MPa) * Operating flow rate at the maximum pressure in continuous operation: 6. L/min maximum SUTD Pressure Flow Rate Characteristics (Typical) Flow rate (L/min) 0 0 Flow rate (L/min) Pressure (MPa) Pressure (MPa) * Operating flow rate at the maximum pressure in continuous operation: L/min maximum * Operating flow rate at the maximum pressure in continuous operation: 6 L/min maximum

16 Super Unit [Single pump type] operating pressure MPa Pressure Flow rate characteristics (Representative) flow rate / L/min 0 00 SUTS00 SUTS0- SUTS0- Flow rate (L/min) SUTS00 SUTS0 SUTS00 SUTS0 0 0 SUTS0 Tankless type Unit type Pressure (MPa) * The graph shows actual flow rates (representative values). * Operating flow rate at the maximum pressure in continuous operation: SUTS0: L/min maximum SUTS0: L/min maximum Specifications SUT00S0- Tankless type SUT00S0- SUT0S0- Unit type SUT0S0- flow rate (theoretical value; L/min) * operating pressure (MPa) Pump unit Operating flow rate adjustment range (L/min) Operating pressure adjustment range (MPa) Motor capacity Motor capacity (equivalent kw) Power supply Operating conditions Motor pump/unit AC φ00v (0 Hz) Rated current AC φ00v ( Hz) (A) AC φ0v ( Hz) Power source breaker setting (A) External input signal External Digital output output signal Contact output Mass (kg) Usable oil * Operating hydraulic oil temperature (in tank) Operating ambient temperature Storage ambient temperature Operating ambient humidity Installation site Others Tank capacity (L) Standard coating color.. to.. kw.. to.. kw.0. to.0 -phase, 00 V (0 Hz), 00 V ( Hz), 0 V ( Hz) (Permissible voltage fluctuation: ±0%) channels Photo-coupler insulation, DC V (DC V maximum), ma/channel channels, photo coupler insulation, FET output, DC V, 0 ma maximum per channel channel ( common contact), dry contact Contact capacity: DC V, 0. A (resistance load) 9 9 Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil Viscosity grade: ISO VG to 6 Viscosity range: to 00 mm /s Contamination: Within NAS class 0 Volumetric water content: 0.% maximum.. to.. kw 0 to C (Recommended operating temperature range: to 0 C).. to.. kw 0 to 0 C 0 to C % RH max. (no condensation) Indoors (Be sure to secure the unit with bolts.) Be sure to connect a circuit breaker for all (three) poles and the earth leakage breaker. Make sure that the electrical wiring meets the requirements of European Standard EN0-. Frequent turning this unit s power supply ON/OFF will considerably shorten the control unit s service life. To start or stop the unit at -minute or shorter intervals, use the unit s control stop function. Be sure to connect the ground terminal. Ivory white (Munsell code Y./) Note) *: The pump flow rate has been factory-set to the maximum discharge rate. The maximum discharge rate given in the table above is a theoretical value, not a guaranteed value. *: Consult Daikin about the use of hydraulic oils other than mineral-oil base type (e.g. hydrous/synthetic) such as water-glycol hydraulic oil. *: The unit incorporates a safety valve. *: When selecting a Super Unit, refer to Pressure-Flow rate characteristics and how to select a unit on Page 9. For the purpose of making improvements, the specifications given in catalogs are subject to change without prior notice. Be sure to refer to the latest outside drawing.

17 External Dimension Diagram Tankless type SUT00S0- SUT00S0- Pressure indication and operation panel P Rc⅜ Part No. Name Quantity - Motor pump incorporating an IPM motor - Controller () (6) AC fan Base 90 0 () -φ0 holes (for fixing bolts) (M bolts recommended) φ hole (Power cable port) φ hole (Signal cable port) - () DR Rc⅜ Wing bolt for fastening during transportation (at location) (To be removed before operation) () (66) (0) Suction air Unit ******** Unit (09) - (6) () Unit type 9 T Rc Optional port: Rp⅜ (0) φ hole (Signal cable port) DR Rp¾ (above oil level) Optional port: Rp½. 0 () () 0 Pressure indication and operation panel () 6- -M (Manifold bracket mount) (Manifold bracket mount) P Rc⅜ 0 (0) Foundation plate (Option) (E-SUTPLATE-) -φ holes (for fixing bolts) (M bolts recommended) 0 SUT0S0- SUT0S0- Part No. Name Quantity Oil tank Suction strainer Stop valve Oil level gauge Oil filter port-cum-air bleeder 6- Motor pump incorporating an IPM motor 6- Controller Oil cooler AC fan Suction port: G¾ Cleaning port Specifications/External Dimension Diagram MPa / L/min φ hole (Power cable port) SUT0SL0- Unit L Upper limit (Yellow line) L Lower limit (Red line) Cleaning port tightening caution Suction air (6) 9 (0) 6 Oil sampling port/ Oil drain port: Rc½ Wing bolt for fastening during transportation (at location on the back) (To be removed before operation) -M (through hole) Tapped holes for mounting the foundation plate (at locations) 0 00 (0) (0) 6

18 Super Unit [Single pump type] operating pressure MPa Pressure Flow rate characteristics (Representative) flow rate 0 L/min 0 00 SUTS00 SUTS SUTS00 Flow rate (L/min) 0 0 SUTS0 SUTS00 SUTS0 0 0 SUTS0 Tankless type Pressure (MPa) Unit type * The graph shows actual flow rates (representative values). * Operating flow rate at the maximum pressure in continuous operation: L/min maximum Specifications Tankless type SUT00S00- Unit type SUT0S00- flow rate (theoretical value; L/min) * operating pressure (MPa) Pump unit Operating flow rate adjustment range (L/min) Operating pressure adjustment range (MPa) Motor capacity Motor capacity (equivalent kw) Power supply Motor pump/unit AC φ00v (0 Hz) Rated current AC φ00v ( Hz) (A) AC φ0v ( Hz) Power source breaker setting (A) External input signal External Digital output output signal Contact output Mass (kg) Operating conditions Usable oil * Operating hydraulic oil temperature (in tank) Operating ambient temperature Storage ambient temperature Operating ambient humidity Installation site Others Tank capacity (L) Standard coating color to 9.. to.0. kw -phase, 00 V (0 Hz), 00 V ( Hz), 0 V ( Hz) (Permissible voltage fluctuation: ±0%) channels Photo-coupler insulation, DC V (DC V maximum), ma/channel channels, photo coupler insulation, FET output, DC V, 0 ma maximum per channel channel ( common contact), dry contact Contact capacity: DC V, 0. A (resistance load) 6 6 Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil Viscosity grade: ISO VG to 6 Viscosity range: to 00 mm /s Contamination: Within NAS class 0 Volumetric water content: 0.% maximum 0 to C (Recommended operating temperature range: to 0 C) 0 to 0 C 0 to C % RH max. (no condensation) Indoors (Be sure to secure the unit with bolts.) Be sure to connect a circuit breaker for all (three) poles and the earth leakage breaker. Make sure that the electrical wiring meets the requirements of European Standard EN0-. Frequent turning this unit s power supply ON/OFF will considerably shorten the control unit s service life. To start or stop the unit at -minute or shorter intervals, use the unit s control stop function. Be sure to connect the ground terminal. Ivory white (Munsell code Y./) Note) *: The pump flow rate has been factory-set to the maximum discharge rate. The maximum discharge rate given in the table above is a theoretical value, not a guaranteed value. *: Consult Daikin about the use of hydraulic oils other than mineral-oil base type (e.g. hydrous/synthetic) such as water-glycol hydraulic oil. *: The unit incorporates a safety valve. *: When selecting a Super Unit, refer to Pressure-Flow rate characteristics and how to select a unit on Page 9. For the purpose of making improvements, the specifications given in catalogs are subject to change without prior notice. Be sure to refer to the latest outside drawing.

19 External Dimension Diagram Tankless type P Rc½ Pressure indication and operation panel SUT00S00- Part No. Name Quantity - Motor pump incorporating an IPM motor - Controller (9) (0) AC fan Base 90 0 () -φ0 holes (for fixing bolts) (M bolts recommended) φ hole (Power cable port) φ hole (Signal cable port) - () DR Rc⅜ Wing bolt for fastening during transportation (at location) (To be removed before operation) () (66) 0 Suction Unit air Suction air (0) - () (9) Unit type T Rc DR Rp¾ (above oil level) φ hole (Signal cable port) -M (Manifold bracket mount) Pressure indication and operation panel 96 (0) () (0) Optional port: Rp½ 0. Optional port: Rp⅜ P Rc½ Foundation plate (Option) (E-SUTPLATE-) -φ holes (for fixing bolts) (M bolts recommended) 0 SUT0S00- Part No. Name Quantity Oil tank Suction strainer Stop valve Oil level gauge Oil filler port-cum-air breather 6- Motor pump incorporating an IPM motor 6- Controller Suction port: G¾ Oil cooler AC fan Cleaning port Specifications/External Dimension Diagram MPa 0 L/min φ hole (Power cable port) Suction air EHU0R-M0- EHU0R-M0- Unit L Upper limit (Yellow line) L Lower limit (Red line) 6-9 (6) (9) Cleaning port tightening caution 6 Oil sampling port/ Oil drain port: Rc½ 0 0 Bolt Caution 0 0 -M (through hole) Tapped holes for mounting the foundation plate (at locations) 0 Wing bolt for fastening during transportation (at location on the back) (To be removed before operation) 9 (0) 0 00 (0) (0)

20 Super Unit [Single pump type] operating pressure MPa Pressure Flow rate characteristics (Representative) flow rate L/min 0 00 SUTS00 SUT00S0- SUT06S0- Flow rate (L/min) : 0 SUTS00 SUTS0 SUTS00 SUTS0 0 0 SUTS0 Tankless type Pressure (MPa) Unit type * The graph shows actual flow rates (representative values). * Operating flow rate at the maximum pressure in continuous operation: L/min maximum Specifications Tankless type SUT00S0- Unit type SUT06S0- flow rate (theoretical value; L/min) * operating pressure (MPa) Pump unit Operating flow rate adjustment range (L/min) Operating pressure adjustment range (MPa) Motor capacity Motor capacity (equivalent kw) Power supply Motor pump/unit AC φ00v (0 Hz) Rated current AC φ00v ( Hz) (A) AC φ0v ( Hz) Power source breaker setting (A) Operating conditions External input signal External Digital output output signal Contact output Mass (kg) Usable oil * Operating hydraulic oil temperature (in tank) Operating ambient temperature Storage ambient temperature Operating ambient humidity Installation site Others Tank capacity (L) Standard coating color to 6.. to.0.0 kw -phase, 00 V (0 Hz), 00 V ( Hz), 0 V ( Hz) (Permissible voltage fluctuation: ±0%).. 0. channels Photo-coupler insulation, DC V (DC V maximum), ma/channel channels, photo coupler insulation, FET output, DC V, 0 ma maximum per channel channel ( common contact), dry contact Contact capacity: DC V, 0. A (resistance load) 6 9 Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil Viscosity grade: ISO VG to 6 Viscosity range: to 00 mm /s Contamination: Within NAS class 0 Volumetric water content: 0.% maximum 0 to C (Recommended operating temperature range: to 0 C) 0 to 0 C 0 to C % RH max. (no condensation) Indoors (Be sure to secure the unit with bolts.) Be sure to connect a circuit breaker for all (three) poles and the earth leakage breaker. Make sure that the electrical wiring meets the requirements of European Standard EN0-. Frequent turning this unit s power supply ON/OFF will considerably shorten the control unit s service life. To start or stop the unit at -minute or shorter intervals, use the unit s control stop function. Be sure to connect the ground terminal. Ivory white (Munsell code Y./) Note) *: The pump flow rate has been factory-set to the maximum discharge rate. The maximum discharge rate given in the table above is a theoretical value, not a guaranteed value. *: Consult Daikin about the use of hydraulic oils other than mineral-oil base type (e.g. hydrous/synthetic) such as water-glycol hydraulic oil. *: The unit incorporates a safety valve. *: When selecting a Super Unit, refer to Pressure-Flow rate characteristics and how to select a unit on Page 9. For the purpose of making improvements, the specifications given in catalogs are subject to change without prior notice. Be sure to refer to the latest outside drawing. 9

21 External Dimension Diagram Tankless type Pressure indication and operation panel Unloading port Rc½ SUT00S0- (0) P Rc¾ Part No. Name Quantity - Motor pump incorporating an IPM motor - Controller AC fan Base Check valve (9) (6) (9) (0) () -φ0 holes (for fixing bolts) (M bolts recommended) φ hole (Power cable port) φ hole (Signal cable port) - DR Rc⅜ Wing bolt for fastening during transportation (at location) (To be removed before operation) () (66) () Suction air Unit ******** Unit - (9) (6) () Unit type T Rc T Rc¾ (Plugged at shipment) Optional port: Rp⅜ Optional port: Rp½ 0 -φ holes (for fixing bolts) (M bolts recommended) (0) 00 DR Rp¾ (above oil level) 0 -M (Manifold bracket mount) Suction port: Rc P Rc¾ Foundation plate (Option) Pressure indication and operation panel (E-SUTPLATE-) () (0) () SUT06S0- () (6) Part No. Name Quantity Oil tank Suction strainer Stop valve Oil level gauge Oil filler port-cum-air breather 6- Motor pump incorporating an IPM motor 6- Controller Oil cooler AC fan 9 Return filter 0 Check valve Specifications/External Dimension Diagram MPa L/min Safety Unit caution Unit L Upper limit (Yellow line) L Lower limit (Red line) 6 9 Suction air 6- () Cleaning port tightening caution Cleaning port Wing bolt for fastening during transportation (at location on the back) 0 0 (To be removed before operation) () Bolt Caution 9 -M (through hole) Tapped holes for mounting the foundation plate (at locations) (0) 0 00 Oil sampling port/ Oil drain port: Rc½ 0

22 Super Unit [Single pump type] operating pressure MPa Pressure Flow rate characteristics (Representative) flow rate 0 L/min 0 00 SUTS00 SUTS SUTS00 Flow rate (L/min) 0 0 SUTS0 SUTS00 SUTS0 0 0 SUTS0 Tankless type Pressure (MPa) Unit type * The graph shows actual flow rates (representative values). * Operating flow rate at the maximum pressure in continuous operation: 9 L/min maximum Specifications Tankless type SUT00S00- Unit type SUT0S00- flow rate (theoretical value; L/min) * operating pressure (MPa) Pump unit Operating flow rate adjustment range (L/min) Operating pressure adjustment range (MPa) Motor capacity Motor capacity (equivalent kw) Power supply Motor pump/unit AC φ00v (0 Hz) Rated current AC φ00v ( Hz) (A) AC φ0v ( Hz) Power source breaker setting (A) Operating conditions External input signal External Digital output output signal Contact output Mass (kg) Usable oil * Operating hydraulic oil temperature (in tank) Operating ambient temperature Storage ambient temperature Operating ambient humidity Installation site Others Tank capacity (L) Standard coating color to.0. to.0.0 kw -phase, 00 V (0 Hz), 00 V ( Hz), 0 V ( Hz) (Permissible voltage fluctuation: ±0%)... 0 channels Photo-coupler insulation, DC V (DC V maximum), ma/channel channels, photo coupler insulation, FET output, DC V, 0 ma maximum per channel channel ( common contact), dry contact Contact capacity: DC V, 0. A (resistance load) Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil Viscosity grade: ISO VG to 6 Viscosity range: to 00 mm /s Contamination: Within NAS class 0 Volumetric water content: 0.% maximum 0 to C (Recommended operating temperature range: to 0 C) 0 to 0 C 0 to C % RH max. (no condensation) Indoors (Be sure to secure the unit with bolts.) Be sure to connect a circuit breaker for all (three) poles and the earth leakage breaker. Make sure that the electrical wiring meets the requirements of European Standard EN0-. Frequent turning this unit s power supply ON/OFF will considerably shorten the control unit s service life. To start or stop the unit at -minute or shorter intervals, use the unit s control stop function. Be sure to connect the ground terminal. 00 Ivory white (Munsell code Y./) Note) *: The pump flow rate has been factory-set to the maximum discharge rate. The maximum discharge rate given in the table above is a theoretical value, not a guaranteed value. *: Consult Daikin about the use of hydraulic oils other than mineral-oil base type (e.g. hydrous/synthetic) such as water-glycol hydraulic oil. *: The unit incorporates a safety valve. *: When selecting a Super Unit, refer to Pressure-Flow rate characteristics and how to select a unit on Page 9. For the purpose of making improvements, the specifications given in catalogs are subject to change without prior notice. Be sure to refer to the latest outside drawing.

23 SUT0D0L0- External Dimension Diagram Tankless type Motor cable Pressure indication and operation panel (9) SUT00S00- P Rc¾ Part No. Name Quantity - Motor pump incorporating an IPM motor - Controller AC fan Base 9 Unloading port: Rc½ () (96) Check valve () 0 6 () -φ0 holes (for fixing bolts) (M bolts recommended) - DR Rc⅜ - () (6) () Suction air Unit (.) () (0) (0) Unit type T Rc-¼ (Plugged at shipment) T Rc-½ () 0 00 DR Rp¾ (above oil level) () () -M (Manifold bracket mount) Pressure indication and operation panel Optional port: Rp⅜ Optional port: Rp½ P Rc¾ -φ holes (for fixing bolts) (Fitted with a vinyl cap (M bolts recommended) at shipment) (0) () (0) Foundation plate (Option) (E-SUTPLATE-) (9) Wing bolt for fastening during transportation (at locations) (To be removed before operation) Transportation SUT0S00- () (90) Suction port: Rc (Plugged (with O-ring) at shipment) Part No. Name Quantity Oil tank Suction strainer Stop valve Oil level gauge Oil filler port-cum-air breather 6- Motor pump incorporating an IPM motor 6- Controller Oil cooler AC fan 9 Return filter 0 Check valve Cleaning port Specifications/External Dimension Diagram MPa 0 L/min (6) Suction air () 0 (9) Wing bolt for fastening during transportation (at location on the back) (To be removed before operation) Bolt Caution () -M (through hole) Tapped holes for mounting the foundation plate (at locations) (0) Unit Cleaning port tightening caution 00 L Upper limit (Yellow line) 6 L Lower limit (Red line) (6) Oil sampling port/ Oil drain port: Rc½

24 Super Unit [Single pump type] operating pressure MPa Pressure Flow rate characteristics (Representative) flow rate 0 L/min 0 00 SUTS00 SUT00S SUTS00 Flow rate (L/min) 0 0 SUTS0 SUTS00 SUTS0 0 0 SUTS0 Tankless type Pressure (MPa) * The graph shows actual flow rates (representative values). * Operating flow rate at the maximum pressure in continuous operation: 6 L/min maximum Specifications Tankless type SUT00S00- flow rate (theoretical value; L/min) * operating pressure (MPa) Pump unit Operating flow rate adjustment range (L/min) Operating pressure adjustment range (MPa) Motor capacity Motor capacity (equivalent kw) Power supply Motor pump AC φ00v (0 Hz) Rated current AC φ00v ( Hz) (A) AC φ0v ( Hz) Power source breaker setting (A) Operating conditions External input signal External Digital output output signal Contact output Mass (kg) Usable oil * Operating hydraulic oil temperature (in tank) Operating ambient temperature Storage ambient temperature Operating ambient humidity Installation site Others Tank capacity (L) Standard coating color 0.0. to 0. to.0.0 kw -phase, 00 V (0 Hz), 00 V ( Hz), 0 V ( Hz) (Permissible voltage fluctuation: ±0%)...9 channels Photo-coupler insulation, DC V (DC V maximum), ma/channel channels, photo coupler insulation, FET output, DC V, 0 ma maximum per channel channel ( common contact), dry contact Contact capacity: DC V, 0. A (resistance load) Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil Viscosity grade: ISO VG to 6 Viscosity range: to 00 mm /s Contamination: Within NAS class 0 Volumetric water content: 0.% maximum 0 to C (Recommended operating temperature range: to 0 C) 0 to 0 C 0 to C % RH max. (no condensation) Indoors (Be sure to secure the unit with bolts.) Be sure to connect a circuit breaker for all (three) poles and the earth leakage breaker. Make sure that the electrical wiring meets the requirements of European Standard EN0-. Frequent turning this unit s power supply ON/OFF will considerably shorten the control unit s service life. To start or stop the unit at -minute or shorter intervals, use the unit s control stop function. Be sure to connect the ground terminal. Ivory white (Munsell code Y./) Note) *: The pump flow rate has been factory-set to the maximum discharge rate. The maximum discharge rate given in the table above is a theoretical value, not a guaranteed value. *: Consult Daikin about the use of hydraulic oils other than mineral-oil base type (e.g. hydrous/synthetic) such as water-glycol hydraulic oil. *: The unit incorporates a safety valve. *: When selecting a Super Unit, refer to Pressure-Flow rate characteristics and how to select a unit on Page 9. For the purpose of making improvements, the specifications given in catalogs are subject to change without prior notice. Be sure to refer to the latest outside drawing.

25 I Disconnect all power before opening terminal cover of unit. Wait minutes until DC Bus capacitors dischange. MFG No.: Note. MASS : kg INSULATION CLASS: F V Hz MAX. FLOW : 0 L/min φ 00 0: 6 A 0.9 PF MAX.PRESSURE :.6 MPa φ φ DAIKIN INDUSTRIES,LTD. MADE IN JAPAN DAIKIN INDUSTRIES,LTD. MADE IN JAPAN DAIKIN INDUSTRIES,LTD. MADE IN JAPAN External Dimension Diagram Tankless type Suction port: Rc-¼ 9 SUT00S00- Encoder wiring connector 0 D EC NC 6 Discharge port Rc-¼ 9 9 &ast;&ast; Drain port Rc⅜ Unloading port Rc¾ Motor wiring port (φ) AC fan, thermistor wiring port (φ) Suction air 0 -. (Installation) Control unit 0 0 SUT00S00- SUT00D0- Controller (Installed separately) Cooling fan Cooling fan Controller installation hole -φ (M6 bolts recommended) Specifications/External Dimension Diagram. <Top> Cooling fan exhaust Cooling fan suction () User I/O terminal (M) Encoder Motor thermistor Pressure sensor I/O signal. Controller M screw (for ground connection) 6 6. FG FG GND +V Z- Z+ B- B+ A- A+ THM- THM+ AGND AO (QO) AGND AO (PO) AGND AIN (QI) AGND AIN (PI) AGND P_S AV ALM_C ALM_B ALM_A DOCOM DO DO6 DO DO DO DO DO DI DI DI6 DI DI DI DI DI DICOM DGND RxD TxD FG FG 0 WARNING May cause electric shock. DAIKIN INDUSTRIES,LTD. 0 () 0 MFG No.: MASS : kg INSULATION CLASS: F V Hz A MAX.FLOW : L/min φ 00 0 MAX.PRESSURE : MPa φ 00 φ 0 PF Operation panel Product Main power supply terminal block (M) Main power supply DC reactor Regenerative resistor Motor output Electromagnetic valve terminal block (M) Electromagnetic valve power supply AC fan power supply M screw (for ground connection) M screw (for ground connection) () () MPa 0 L/min

26 Super Unit [Single pump type] operating pressure flow rate SUTS0-0 MPa L/min Flow rate (L/min) Pressure Flow rate characteristics (Representative) SUTS0 0 SUTS0 0 Tankless type Unit type Pressure (MPa) * The graph shows actual flow rates (representative values). * Operating flow rate at the maximum pressure in continuous operation: L/min maximum Specifications Tankless type SUT00S0- Unit type SUT0S0- flow rate (theoretical value; L/min) * operating pressure (MPa) Pump unit Operating flow rate adjustment range (L/min) Operating pressure adjustment range (MPa) Motor capacity Motor capacity (equivalent kw) Power supply Motor pump/unit AC φ00v (0 Hz) Rated current AC φ00v ( Hz) (A) AC φ0v ( Hz) Power source breaker setting (A) Operating conditions External input signal External Digital output output signal Contact output Mass (kg) Usable oil * Operating hydraulic oil temperature Operating ambient temperature Storage ambient temperature Operating ambient humidity Installation site Others Tank capacity (L) Standard coating color to.. to 0.0. kw -phase, 00 V (0 Hz), 00 V ( Hz), 0 V ( Hz) (Permissible voltage fluctuation: ±0%).0.. channels Photo-coupler insulation, DC V (DC V maximum), ma/channel channels, photo coupler insulation, FET output, DC V, 0 ma maximum per channel channel ( common contact), dry contact Contact capacity: DC V, 0. A (resistance load) 9 9 Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil Viscosity grade: ISO VG to 6 Viscosity range: to 00 mm /s Contamination: Within NAS class 9 Volumetric water content: 0.% maximum 0 to C (Recommended operating temperature range: to 0 C) 0 to 0 C 0 to C % RH max. (no condensation) Indoors (Be sure to secure the unit with bolts.) Be sure to connect a circuit breaker for all (three) poles and the earth leakage breaker. Make sure that the electrical wiring meets the requirements of European Standard EN0-. Frequent turning this unit s power supply ON/OFF will considerably shorten the control unit s service life. To start or stop the unit at -minute or shorter intervals, use the unit s control stop function. Be sure to connect the ground terminal. Ivory white (Munsell code Y./) Note) *: The pump flow rate has been factory-set to the maximum discharge rate. The maximum discharge rate given in the table above is a theoretical value, not a guaranteed value. *: Consult Daikin about the use of hydraulic oils other than mineral-oil base type (e.g. hydrous/synthetic) such as water-glycol hydraulic oil. Keep the contamination level of the hydraulic fluid within NAS contamination class 0 for operating pressures of MPa or lower. *: The unit incorporates a safety valve. *: When selecting a Super Unit, refer to Pressure-Flow rate characteristics and how to select a unit on Page 9. For the purpose of making improvements, the specifications given in catalogs are subject to change without prior notice. Be sure to refer to the latest outside drawing.

27 External Dimension Diagram Tankless type SUT00S0- P Rc⅜ Pressure indication and operation panel Part No. Name Quantity - Motor pump incorporating an IPM motor - Controller () AC fan (6) Base φ hole (Power cable port) φ hole (Signal cable port) () -φ0 holes (for fixing bolts) (M bolts recommended) () DR Rc⅜ (Fitted with a vinyl cap at shipment) Wing bolt for fastening during transportation (at location) (To be removed before operation) () (66) Suction air Unit - (0) (6) () (09) 0 Suction port: G¾ (Fitted with a vinyl cap at shipment) Unit type 9 T Rc (Fitted with a vinyl cap at shipment) Optional port: Rp⅜ DR Rp¾ (above oil level) -M (Manifold bracket bracket mount) mount) Optional port: Rp½ 00 0 P Rc⅜ SUT0S0- Part No. Name Quantity Oil tank Suction strainer Stop valve Oil level gauge Specifications/External Dimension Diagram Oil filter port-cum-air bleeder (0) 0. Pressure indication and operation panel 96 () (0) Foundation plate (Option) (E-SUTPLATE-) -φ holes (for fixing bolts) (M bolts recommended) 6- Motor pump incorporating an IPM motor 6- Controller Oil cooler AC fan 0 MPa φ hole (Signal cable port) 6- Cleaning port L/min φ hole (Power cable port) Suction air SUT0SL0- Unit L Upper limit (Yellow line) L Lower limit (Red line) 6-9 (6) 9 Cleaning port tightening caution 6 Oil sampling port/ Oil drain port: Rc½ 0 0 Bolt Caution Wing bolt for fastening during transportation -M (through hole) (at location on the back) (To be removed before operation) Tapped holes for mounting the foundation plate (at locations) 0 00 (0) (0) 6

28 Super Unit [Single pump type] operating pressure flow rate SUTS0-0 MPa L/min Flow rate (L/min) Pressure Flow rate characteristics (Representative) SUTS0 0 SUTS0 0 Tankless type Pressure (MPa) Unit type * The graph shows actual flow rates (representative values). * Operating flow rate at the maximum pressure in continuous operation: L/min maximum Specifications Tankless type SUT00S0- Unit type SUT0S0- flow rate (theoretical value; L/min) * operating pressure (MPa) Pump unit Operating flow rate adjustment range (L/min) Operating pressure adjustment range (MPa) Motor capacity Motor capacity (equivalent kw) Power supply Motor pump/unit AC φ00v (0 Hz) Rated current AC φ00v ( Hz) (A) AC φ0v ( Hz) Power source breaker setting (A) Operating conditions External input signal External Digital output output signal Contact output Mass (kg) Usable oil * Operating hydraulic oil temperature (in tank) Operating ambient temperature Storage ambient temperature Operating ambient humidity Installation site Others Tank capacity (L) Standard coating color to.6. to 0.0. kw -phase, 00 V (0 Hz), 00 V ( Hz), 0 V ( Hz) (Permissible voltage fluctuation: ±0%) channels Photo-coupler insulation, DC V (DC V maximum), ma/channel channels, photo coupler insulation, FET output, DC V, 0 ma maximum per channel channel ( common contact), dry contact Contact capacity: DC V, 0. A (resistance load) 6 6 Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil Viscosity grade: ISO VG to 6 Viscosity range: to 00 mm /s Contamination: Within NAS class 9 Volumetric water content: 0.% maximum 0 to C (Recommended operating temperature range: to 0 C) 0 to 0 C 0 to C % RH max. (no condensation) Indoors (Be sure to secure the unit with bolts.) Be sure to connect a circuit breaker for all (three) poles and the earth leakage breaker. Make sure that the electrical wiring meets the requirements of European Standard EN0-. Frequent turning this unit s power supply ON/OFF will considerably shorten the control unit s service life. To start or stop the unit at -minute or shorter intervals, use the unit s control stop function. Be sure to connect the ground terminal. Ivory white (Munsell code Y./) Note) *: The pump flow rate has been factory-set to the maximum discharge rate. The maximum discharge rate given in the table above is a theoretical value, not a guaranteed value. *: Consult Daikin about the use of hydraulic oils other than mineral-oil base type (e.g. hydrous/synthetic) such as water-glycol hydraulic oil. Keep the contamination level of the hydraulic fluid within NAS contamination class 0 for operating pressures of MPa or lower. *: The unit incorporates a safety valve. *: When selecting a Super Unit, refer to Pressure-Flow rate characteristics and how to select a unit on Page 9. For the purpose of making improvements, the specifications given in catalogs are subject to change without prior notice. Be sure to refer to the latest outside drawing.

29 External Dimension Diagram Tankless type SUT00S0- Pressure indication and operation panel P Rc⅜ Part No. Name Quantity - Motor pump incorporating an IPM motor - Controller AC fan (9) (0) Base 90 () -φ0 holes (for fixing bolts) (M bolts recommended) 0 φ hole (Power cable port) φ hole (Signal cable port) - DR Rc⅜ () Wing bolt for fastening during transportation (at location) (To be removed before operation) () (0) (66) 0 Suction air Unit - () (9) Unit type 9 T Rc (Fitted with a vinyl cap at shipment) Optional port: Rp⅜ (0) DR Rp¾ (above oil level) -M (Manifold bracket mount) 00 0 Optional port: Rp½ 0 Pressure indication and operation panel 96 () (0) Foundation plate (Option) (E-SUTPLATE-) -φ holes (for fixing bolts) (M bolts recommended) P Rc⅜ 0 SUT0S0- Part No. Name Quantity Oil tank Suction strainer Stop valve Oil level gauge Oil filler port-cum-air breather 6- Motor pump incorporating an IPM motor 6- Controller Suction port: G¾ Oil cooler AC fan Specifications/External Dimension Diagram 0 MPa φ hole (Signal cable port) φ hole (Power cable port) Suction air 6- SUT0SL0- Unit L Upper limit (Yellow line) L Lower limit (Red line) 6-9 (6) Cleaning port tightening caution Cleaning port 6 L/min 0 0 Bolt Caution 9 (9) (0) 0 0 Wing bolt for fastening during transportation (at location on the back) (To be removed before operation) 0 -M (through hole) Tapped holes for mounting the foundation plate (at locations) 0 00 (0) (0) Oil sampling port/ Oil drain port: Rc½

30 Super Unit [Single pump type] operating pressure 6 MPa Pressure Flow rate characteristics (Representative) flow rate L/min SUTS6- SUTS6- Flow rate (L/min) SUTS6 SUTS Tankless type Unit type Pressure (MPa) * The graph shows actual flow rates (representative values). * Operating flow rate at the maximum pressure in continuous operation: L/min maximum Specifications Tankless type Unit type SUT00S6- SUT00S6- SUT0S6- SUT06S6-9 Pump unit Motor capacity Power supply Rated current (A) Operating conditions flow rate (theoretical value; L/min) * operating pressure (MPa) Operating flow rate adjustment range (L/min) Operating pressure adjustment range (MPa) Motor capacity (equivalent kw) Motor pump/unit AC φ00v (0 Hz) AC φ00v ( Hz) AC φ0v ( Hz) Power source breaker setting (A) External output signal External input signal Digital output Contact output Mass (kg) Usable oil * Operating hydraulic oil temperature (in tank) Operating ambient temperature Storage ambient temperature Operating ambient humidity Installation site Others Tank capacity (L) Standard coating color to.. to.6. to.. to.6. to 6.0. kw.0 kw. kw.0 kw -phase, 00 V (0 Hz), 00 V ( Hz), 0 V ( Hz) (Permissible voltage fluctuation: ±0%) channels Photo-coupler insulation, DC V (DC V maximum), ma/channel channels, photo coupler insulation, FET output, DC V, 0 ma maximum per channel channel ( common contact), dry contact Contact capacity: DC V, 0. A (resistance load) 6 6 Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil Viscosity grade: ISO VG to 6 Viscosity range: to 00 mm /s Contamination: Within NAS class 9 Volumetric water content: 0.% maximum 0 to C (Recommended operating temperature range: to 0 C) 0 to 0 C 0 to C % RH max. (no condensation) Indoors (Be sure to secure the unit with bolts.) Be sure to connect a circuit breaker for all (three) poles and the earth leakage breaker. Make sure that the electrical wiring meets the requirements of European Standard EN0-. Frequent turning this unit s power supply ON/OFF will considerably shorten the control unit s service life. To start or stop the unit at -minute or shorter intervals, use the unit s control stop function. Be sure to connect the ground terminal. Ivory white (Munsell code Y./) Note) *: The pump flow rate has been factory-set to the maximum discharge rate. The maximum discharge rate given in the table above is a theoretical value, not a guaranteed value. *: Consult Daikin about the use of hydraulic oils other than mineral-oil base type (e.g. hydrous/synthetic) such as water-glycol hydraulic oil. Keep the contamination level of the hydraulic fluid within NAS contamination class 0 for operating pressures of MPa or lower. *: The unit incorporates a safety valve. *: When selecting a Super Unit, refer to Pressure-Flow rate characteristics and how to select a unit on Page 9. For the purpose of making improvements, the specifications given in catalogs are subject to change without prior notice. Be sure to refer to the latest outside drawing.

31 External Dimension Diagram (0) P Rc⅜ (9) SUT00S6- SUT00S6- Name Quantity - Motor pump incorporating an IPM motor - Controller AC fan Base φ hole (Power cable port) φ hole (Signal cable port) -φ0 holes (for fixing bolts) (M bolts recommended) () ( ) ( 90) ( 0) Part No. Pressure indication and operation panel Tankless type - DR Rc⅜ Oil filler port-cum-air breather φ hole (Signal cable port) 6- Motor pump incorporating an IPM motor φ hole (Power cable port) Tapped holes for mounting the foundation plate (at locations) Quantity Oil tank T Rc¾ (Plugged at shipment) Suction strainer Optional port: Rp⅜ Stop valve Optional port: Rp½ Oil level gauge Oil filler port-cum-air breather 6- Motor pump incorporating an IPM motor 6- Controller MPa Unit 6- Suction air / L/min L Lower limit (Red line) Wing bolt for fastening during transportation (at location on the back) (To be removed before operation) L Upper limit (Yellow line) Cleaning port 9 Return filter Foundation plate (Option) (E-SUTPLATE-) (0) () 0 AC fan 6 P Rc⅜ -φ holes (for fixing bolts) (M bolts recommended) (0) 0 Oil cooler Oil sampling port/ Oil drain port: Rc½ Pressure indication and operation panel Name M (through hole) 0 Part No. DR Rp¾ (above oil level) 6 -M 0 (Manifold bracket mount) 00 T Rc 0 Wing bolt for fastening during transportation (at location on the back) (To be removed before operation) SUT06S M (through hole) Tapped holes for mounting the foundation plate (at locations) (0) AC fan L Lower limit (Red line) Suction air L Upper limit (Yellow line) Cleaning port 9 Oil cooler ＳＵＴ０３Ｓ１５Ｌ１６３０ Controller Foundation plate (Option) (E-SUTPLATE-) (0) () Specifications/External Dimension Diagram Oil level gauge (0) 69 6 Pressure indication and operation panel -φ holes (for fixing bolts) (M bolts recommended) 6 (0) Stop valve Suction strainer (9) P Rc⅜ (6) 9 Quantity Oil tank () Name Optional port: Rp½ 0 Part No. Suction port: G¾ (Fitted with a vinyl cap at shipment) ( ): Dimensions for SUT00S T Rc (Fitted with a vinyl cap at shipment) Optional port: Rp⅜ 0 SUT0S6- -M (Manifold bracket mount) 9 DR Rp¾ (above oil level) - ( ) ( 0) Unit type () Unit () 0 (To be removed before operation) ******** () Suction air Wing bolt for fastening during transportation (at location) (09) (66) () () ( ) Unit 0 00 Oil sampling port/ Oil drain port: Rc½

32 Super Unit [Double pump type] operating pressure flow rate SUTD06- Tankless type 6 MPa 0 Unit type L/min Flow rate (L/min) Pressure Flow rate characteristics (Representative) Pressure (MPa) * The graph shows actual flow rates (representative values). * Operating flow rate at the maximum pressure in continuous operation: L/min maximum Specifications Tankless type SUT00D06- Unit type SUT06D06- flow rate (theoretical value; L/min) * operating pressure (MPa) Pump unit Operating flow rate adjustment range (L/min) Operating pressure adjustment range (MPa) Motor capacity Motor capacity (equivalent kw) Power supply Motor pump/unit AC φ00v (0 Hz) Rated current AC φ00v ( Hz) (A) AC φ0v ( Hz) Power source breaker setting (A) Operating conditions External input signal External Digital output output signal Contact output Mass (kg) Usable oil * Operating hydraulic oil temperature (in tank) Operating ambient temperature Storage ambient temperature Operating ambient humidity Installation site Others Tank capacity (L) Standard coating color.. to.0. to.. kw -phase, 00 V (0 Hz), 00 V ( Hz), 0 V ( Hz) (Permissible voltage fluctuation: ±0%) channels Photo-coupler insulation, DC V (DC V maximum), ma/channel channels, photo coupler insulation, FET output, DC V, 0 ma maximum per channel channel ( common contact), dry contact Contact capacity: DC V, 0. A (resistance load) 9 Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil Viscosity grade: ISO VG to 6 Viscosity range: to 00 mm /s Contamination: Within NAS class 9 Volumetric water content: 0.% maximum 0 to C (Recommended operating temperature range: to 0 C) 0 to 0 C 0 to C % RH max. (no condensation) Indoors (Be sure to secure the unit with bolts.) Be sure to connect a circuit breaker for all (three) poles and the earth leakage breaker. Make sure that the electrical wiring meets the requirements of European Standard EN0-. Frequent turning this unit s power supply ON/OFF will considerably shorten the control unit s service life. To start or stop the unit at -minute or shorter intervals, use the unit s control stop function. Be sure to connect the ground terminal. Ivory white (Munsell code Y./) Note) *: The pump flow rate has been factory-set to the maximum discharge rate. The maximum discharge rate given in the table above is a theoretical value, not a guaranteed value. *: Consult Daikin about the use of hydraulic oils other than mineral-oil base type (e.g. hydrous/synthetic) such as water-glycol hydraulic oil. Keep the contamination level of the hydraulic fluid within NAS contamination class 0 for operating pressures of MPa or lower. *: The unit incorporates a safety valve. *: When selecting a Super Unit, refer to Pressure-Flow rate characteristics and how to select a unit on Page 9. For the purpose of making improvements, the specifications given in catalogs are subject to change without prior notice. Be sure to refer to the latest outside drawing..0

33 External Dimension Diagram Tankless type Pressure indication and operation panel Unloading port Rc½ SUT00D06- (6) P Rc¾ Part No. Name Quantity - Motor pump incorporating an IPM motor - Controller AC fan Base Check valve φ hole (Power cable port) φ hole (Signal cable port) (9) - () (9) (0) () -φ0 holes (for fixing bolts) (M bolts recommended) DR Rc⅜ Wing bolt for fastening during transportation (at location) (To be removed before operation) () (66) 0 Unit Suction air Unit - (9) (6) () (9) (9) Suction port: Rc Unit type T Rc 0 T Rc¾ (Plugged at shipment) Optional port: Rp⅜ Optional port: Rp½ -φ holes (for fixing bolts) (M bolts recommended) (0) 00 9 DR Rp¾ (above oil level) M (Manifold bracket mount) Pressure indication and operation panel 00 0 () (0) 6-0 (9) P Rc¾ Foundation plate (Option) (E-SUTPLATE-) SUT06D06- Part No. Name Quantity Oil tank Suction strainer Stop valve Oil level gauge Oil filler port-cum-air breather 6- Motor pump incorporating an IPM motor 6- Controller Oil cooler AC fan 9 Return filter 0 Check valve Specifications/External Dimension Diagram 6 MPa Unit L Upper limit (Yellow line) L Lower limit (Red line) 0 L/min Cleaning port tightening caution Cleaning port 69 6 Suction air () 0 0 Bolt Caution Wing bolt for fastening during transportation (at location on the back) 0 0 (To be removed before operation) 0 9 -M (through hole) Tapped holes for mounting the foundation plate (at locations) (0) 0 00 Oil sampling port/ Oil drain port: Rc½

34 Super Unit [Double pump type] operating pressure flow rate SUTD- Tankless type MPa Unit type L/min Flow rate (L/min) Pressure Flow rate characteristics (Representative) Pressure (MPa) * The graph shows actual flow rates (representative values). * Operating flow rate at the maximum pressure in continuous operation: 6. L/min maximum Specifications Tankless type Unit type SUT00D- SUT06D- SUT0D- flow rate (theoretical value; L/min) * operating pressure (MPa) Pump unit Operating flow rate adjustment range (L/min) Operating pressure adjustment range (MPa) Motor capacity Motor capacity (equivalent kw) Power supply Motor pump/unit AC φ00v (0 Hz) Rated current AC φ00v ( Hz) (A) AC φ0v ( Hz) Power source breaker setting (A) Operating conditions External input signal External Digital output output signal Contact output Mass (kg) Usable oil * Operating hydraulic oil temperature (in tank) Operating ambient temperature Storage ambient temperature Operating ambient humidity Installation site Others Tank capacity (L) Standard coating color 0.6. to 6.. to kw -phase, 00 V (0 Hz), 00 V ( Hz), 0 V ( Hz) (Permissible voltage fluctuation: ±0%).. 0. channels Photo-coupler insulation, DC V (DC V maximum), ma/channel channels, photo coupler insulation, FET output, DC V, 0 ma maximum per channel channel ( common contact), dry contact Contact capacity: DC V, 0. A (resistance load) 99 Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil Viscosity grade: ISO VG to 6 Viscosity range: to 00 mm /s Contamination: Within NAS class 9 Volumetric water content: 0.% maximum 0 to C (Recommended operating temperature range: to 0 C) 0 to 0 C 0 to C % RH max. (no condensation) Indoors (Be sure to secure the unit with bolts.) Be sure to connect a circuit breaker for all (three) poles and the earth leakage breaker. Make sure that the electrical wiring meets the requirements of European Standard EN0-. Frequent turning this unit s power supply ON/OFF will considerably shorten the control unit s service life. To start or stop the unit at -minute or shorter intervals, use the unit s control stop function. Be sure to connect the ground terminal. 00 Ivory white (Munsell code Y./) Note) *: The pump flow rate has been factory-set to the maximum discharge rate. The maximum discharge rate given in the table above is a theoretical value, not a guaranteed value. *: Consult Daikin about the use of hydraulic oils other than mineral-oil base type (e.g. hydrous/synthetic) such as water-glycol hydraulic oil. Keep the contamination level of the hydraulic fluid within NAS contamination class 0 for operating pressures of MPa or lower. *: The unit incorporates a safety valve. *: When selecting a Super Unit, refer to Pressure-Flow rate characteristics and how to select a unit on Page 9. For the purpose of making improvements, the specifications given in catalogs are subject to change without prior notice. Be sure to refer to the latest outside drawing. 6.

35 External Dimension Diagram P Rc¾ (0) Suction air Oil level gauge Oil filler port-cum-air breather 6- Motor pump incorporating an IPM motor 6- Controller Oil cooler AC fan 9 Return filter 0 Check valve Foundation plate (Option) (E-SUTPLATE-) 0 6- Wing bolt for fastening during transportation (at location on the back) (To be removed before operation) Oil level gauge Oil filler port-cum-air breather 6- Motor pump incorporating an IPM motor 6- Controller Oil cooler AC fan 9 Return filter 0 Check valve (9) Stop valve Optional port: Rp½ P Rc¾ -φ holes (for fixing bolts) (M bolts recommended) (0) () Cleaning port 0 Foundation plate (Option) (E-SUTPLATE-) (0) 00 L Upper limit (Yellow line) 6 L Lower limit (Red line) 6- Suction air 0 0 Wing bolt for fastening during transportation (at location on the back) (To be removed before operation) 0 -M (through hole) Tapped holes for mounting the foundation plate (at locations) MPa L/min () T Rc¾ (Plugged at shipment) Optional port: Rp⅜ 9 Suction strainer T Rc (Fitted with a vinyl cap at shipment) Oil sampling port/ Oil drain port: Rc½ -M (Manifold bracket mount) 6 Oil tank Cleaning port M (through hole) Tapped holes for mounting the foundation plate (at locations) 0 L Lower limit (Red line) Oil sampling port/ Oil drain port: Rc½ 0 Quantity L Upper limit (Yellow line) 0 Name Cleaning port tightening caution 6 9 Part No. Unit Suction air DR Rp¾ (above oil level) (Fitted with a vinyl cap at shipment) SUT0D- 6-9 Specifications/External Dimension Diagram -φ holes (for fixing bolts) (M bolts recommended) () 9 Stop valve P Rc¾ Optional port: Rp½ 00 0 (0) DR Rp¾ (above oil level) -M 0 (Manifold bracket mount) Suction strainer Suction port: Rc (Fitted with a vinyl cap at shipment) 0 Oil tank (.) 00 0 (6) Optional port: Rp⅜ 6 9 Quantity - T Rc¾ (Plugged at shipment) Name Unit 00 0 SUT06D- Part No. 0 T Rc () () Wing bolt for fastening during transportation (at location) (To be removed before operation) Unit type DR Rc⅜ () 69 6 Check valve 69 6 (9) (6) Base (9) Unloading port Rc½ - (0) -φ0 holes (for fixing bolts) (M bolts recommended) (6) AC fan Pressure indication and operation panel (0) Controller φ hole (Signal cable port) - φ hole (Power cable port) (9) Quantity Motor pump incorporating an IPM motor Name - (66) Part No. SUT00D- (9) () Tankless type

36 Super Unit [Double pump type] operating pressure flow rate SUTD0- Tankless type MPa 0 Unit type L/min Flow rate (L/min) Pressure Flow rate characteristics (Representative) Pressure (MPa) * The graph shows actual flow rates (representative values). * Operating flow rate at the maximum pressure in continuous operation: L/min maximum Specifications Tankless type Unit type SUT00D0- SUT0D0- SUT6D0- flow rate (theoretical value; L/min) * operating pressure (MPa) Pump unit Operating flow rate adjustment range (L/min) Operating pressure adjustment range (MPa) Motor capacity Motor capacity (equivalent kw) Power supply Motor pump/unit AC φ00v (0 Hz) Rated current AC φ00v ( Hz) (A) AC φ0v ( Hz) Power source breaker setting (A) Operating conditions External input signal External Digital output output signal Contact output Mass (kg) Usable oil * Operating hydraulic oil temperature (in tank) Operating ambient temperature Storage ambient temperature Operating ambient humidity Installation site Others Tank capacity (L) Standard coating color to.0. to kw -phase, 00 V (0 Hz), 00 V ( Hz), 0 V ( Hz) (Permissible voltage fluctuation: ±0%)... 0 channels Photo-coupler insulation, DC V (DC V maximum), ma/channel channels, photo coupler insulation, FET output, DC V, 0 ma maximum per channel channel ( common contact), dry contact Contact capacity: DC V, 0. A (resistance load) Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil Viscosity grade: ISO VG to 6 Viscosity range: to 00 mm /s Contamination: Within NAS class 9 Volumetric water content: 0.% maximum 0 to C (Recommended operating temperature range: to 0 C) 0 to 0 C 0 to C % RH max. (no condensation) Indoors (Be sure to secure the unit with bolts.) Be sure to connect a circuit breaker for all (three) poles and the earth leakage breaker. Make sure that the electrical wiring meets the requirements of European Standard EN0-. Frequent turning this unit s power supply ON/OFF will considerably shorten the control unit s service life. To start or stop the unit at -minute or shorter intervals, use the unit s control stop function. Be sure to connect the ground terminal. 00 Ivory white (Munsell code Y./) Note) *: The pump flow rate has been factory-set to the maximum discharge rate. The maximum discharge rate given in the table above is a theoretical value, not a guaranteed value. *: Consult Daikin about the use of hydraulic oils other than mineral-oil base type (e.g. hydrous/synthetic) such as water-glycol hydraulic oil. Keep the contamination level of the hydraulic fluid within NAS contamination class 0 for operating pressures of MPa or lower. *: The unit incorporates a safety valve. *: When selecting a Super Unit, refer to Pressure-Flow rate characteristics and how to select a unit on Page 9. For the purpose of making improvements, the specifications given in catalogs are subject to change without prior notice. Be sure to refer to the latest outside drawing..0

37 External Dimension Diagram Tankless type Motor cable Pressure indication and operation panel (9) P Rc¾ SUT00D0- Unloading port: Rc½ Part No. Name Quantity - Motor pump incorporating an IPM motor - Controller AC fan Base Check valve 9 (9) -φ0 holes (for fixing bolts) (M bolts recommended) 0 () 6 () (96) - DR Rc⅜ () Suction air Unit () - (99) () (0) Transportation (90) Unit type T Rc-½ T Rc-¼ (Plugged at shipment) () Optional port: Rp⅜ Optional port: Rp½ 0 -φ holes (for fixing bolts) (M bolts recommended) (0) M (Manifold bracket mount) () Wing bolt for fastening during transportation (at locations) (To be removed before operation) 0 00 (69)(9) DR Rp¾ (above oil level) (Fitted with a vinyl cap at shipment) P Rc¾ Foundation plate (Option) (E-SUTPLATE-) () (0) SUT0D0- SUT6D0- Suction port: Rc (Plugged (with O-ring) at shipment) Part No. Name Quantity Oil tank Suction strainer Stop valve Oil level gauge Oil filler port-cum-air breather 6- Motor pump incorporating an IPM motor 6- Controller Oil cooler AC fan 9 Return filter 0 Check valve Cleaning port Specifications/External Dimension Diagram Unit 6 L (00 L) Upper limit (Yellow line) L (6 L) Lower limit (Red line) MPa 6 9 (6) Wing bolt for fastening during transportation (at location on the back) (To be removed before operation) Suction air (9.) 6-9 () -M (through hole) Tapped holes for mounting the foundation plate (at locations) (0) Cleaning port tightening caution (0) 0 (6) 90 (0) (6) Oil sampling port/ Oil drain port: Rc½ (): Dimensions for SUT0D0-0 L/min 6

38 Super Unit [Double pump type] operating pressure flow rate SUT00D0- P-SUT0DKW- Tankless type MPa 0 L/min Flow rate (L/min) Pressure Flow rate characteristics (Representative) Pressure (MPa) Unit type * The graph shows actual flow rates (representative values). * Operating flow rate at the maximum pressure in continuous operation: 6 L/min maximum Specifications Tankless type SUT00D0- Unit type P-SUT0DKW- flow rate (theoretical value; L/min) * operating pressure (MPa) Pump unit Operating flow rate adjustment range (L/min) Operating pressure adjustment range (MPa) Motor capacity Motor capacity (equivalent kw) Power supply Motor pump/unit AC φ00v (0 Hz) Rated current AC φ00v ( Hz) (A) AC φ0v ( Hz) Power source breaker setting (A) Operating conditions External input signal External Digital output output signal Contact output Mass (kg) Usable oil * Operating hydraulic oil temperature (in tank) Operating ambient temperature Storage ambient temperature Operating ambient humidity Installation site Others Tank capacity (L) Standard coating color 0.6. to 0. to 0.6 -phase, 00 V (0 Hz), 00 V ( Hz), 0 V ( Hz) (Permissible voltage fluctuation: ±0%)...9 channels Photo-coupler insulation, DC V (DC V maximum), ma/channel channels, photo coupler insulation, FET output, DC V, 0 ma maximum per channel channel ( common contact), dry contact Contact capacity: DC V, 0. A (resistance load) Special mineral-oil base hydraulic oil/wear-resistant hydraulic oil Viscosity grade: ISO VG to 6 Viscosity range: to 00 mm /s Contamination: Within NAS class 9 Volumetric water content: 0.% maximum 0 to C (Recommended operating temperature range: to 0 C) 0 to 0 C 0 to C % RH max. (no condensation) Indoors (Be sure to secure the unit with bolts.) Be sure to connect a circuit breaker for all (three) poles and the earth leakage breaker. Make sure that the electrical wiring meets the requirements of European Standard EN0-. Frequent turning this unit s power supply ON/OFF will considerably shorten the control unit s service life. To start or stop the unit at -minute or shorter intervals, use the unit s control stop function. Be sure to connect the ground terminal. 00 Ivory white (Munsell code Y./) 0 kw Note) *: The pump flow rate has been factory-set to the maximum discharge rate. The maximum discharge rate given in the table above is a theoretical value, not a guaranteed value. *: Consult Daikin about the use of hydraulic oils other than mineral-oil base type (e.g. hydrous/synthetic) such as water-glycol hydraulic oil. Keep the contamination level of the hydraulic fluid within NAS contamination class 0 for operating pressures of MPa or lower. *: The unit incorporates a safety valve. *: When selecting a Super Unit, refer to Pressure-Flow rate characteristics and how to select a unit on Page 9. For the purpose of making improvements, the specifications given in catalogs are subject to change without prior notice. Be sure to refer to the latest outside drawing.