MODEL 86 PW MODEL 86 PW RACK CONVEYOR STANDARD FEATURES SPECIFIER STATEMENT. Project Item No. Quantity

Size: px

Start display at page:

Download "MODEL 86 PW MODEL 86 PW RACK CONVEYOR STANDARD FEATURES SPECIFIER STATEMENT. Project Item No. Quantity"

Horace Payne
5 years ago
Views:

STANDARD FEATURES One-piece cast stainless steel upper & lower spray arm assemblies for ease of cleaning Internal removable scrap baskets with two-piece scrap screens Standard vertical opening

1 STANDARD FEATURES One-piece cast stainless steel upper & lower spray arm assemblies for ease of cleaning Internal removable scrap baskets with two-piece scrap screens Standard vertical opening accommodates 1 x sheet pans Wide 15-1/" and leakproof doors, internally-fitted for ease of cleaning Anti-jam conveyor drive system Energy Sentinel (Idle pump shut-off) Convenient top-mounted controls Automatic tank fill Common utility connections safety switch activated drain closures Enclosure panels (front and sides) Splash shields Low-water tank heat protection Rinse-saver device Stainless steel heavy-gauge construction, including base and feet Electric tank heat Prewash pump 1 Hp motor External prewash scrap basket Wash/rinse pump Hp motors Stainless steel pump and impellers Project Item No. Quantity MODEL 86 PW Shown with Extended Hood and Damper Option SPECIFIER STATEMENT Specified unit will be Champion Model 86 PW, high temperature rack conveyor dishwashing machine with " prewash. Constructed of Type 304 stainless steel and measuring long with 0-3/4" vertical opening. Features top mounted control cabinet; upper and lower one-piece stainless steel spray arm assemblies, removable internal scrap baskets with two-piece scrap screens, external prewash scrap basket. Large 15-1/" prewash and wash/rinse access doors with double-hook safety latches. Anti-jam conveyor drive system. 1 year parts and labor warranty. MODEL 86 PW RACK CONVEYOR CH N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 Tel: 800/ Fax: 905/ (3M) /05 Printed in U.S.A. Champion Industries, Inc. P. O. Box 4149, Winston-Salem, NC 7115 Tel: 800/ Fax: 336/

EFFICIENT NEW SPRAY SYSTEM DESIGN To make the E-Series more efficient and more forgiving we

fluted directional spray jets for quick and efficient washing Easily removable spray arm

water for better washing results Wall-of-Water Spray Pattern One-Piece Cast Stainless Steel

the E-Series footprint to offer a variety of advantages over other booster designs, such as:

for 70 F rise Conductive heat transfer to wash tank Stainless steel booster heater lasts the

2 EFFICIENT NEW SPRAY SYSTEM DESIGN To make the E-Series more efficient and more forgiving we designed a new spray arm system that includes: Wall-of-water spray pattern via stainless steel fluted directional spray jets for quick and efficient washing Easily removable spray arm assembly for ease of cleaning Stainless steel pump housing and impeller Larger tanks hold more water for better washing results Wall-of-Water Spray Pattern One-Piece Cast Stainless Steel Spray Assembly INTEGRATED BOOSTER HEATER As well as the E-Series performs, we created a way to make it perform even better. The electric booster heater may be optional, but it is an exceptional value engineered within the E-Series footprint to offer a variety of advantages over other booster designs, such as: Inter-plumbed and inter-wired One control shuts off washer and booster 15 kw for 40 F rise 4 kw for 70 F rise Conductive heat transfer to wash tank Stainless steel booster heater lasts the life of the machine Integrated design saves floor space Large Heating Element Stainless Steel Built-in Nested Booster Two-Piece Scrap Screen Built-in Scrap Basket

3 1" Open 58-1/" 0-3/4" 10" " 64" 4" 4" 6B 5" 15-1/" PRE 1 5" 3 4B 5 3" RINSE 1" Open 58-1/" 0-3/4" 10" " 64" 4" 4" 6B 15-1/" PRE 5" BSTR 8-1/" 5" 1 8-1/" 3 1B 4B 5 3" RINSE Without Booster With Booster Left-to-Right Operation 1-1/" Can be up to 10" 1-3/4" 5/ 5" /" 14-1/" 1 10" " 6B -1/" " 1-1/" Wall 38-1/" Nom. 36-1/ 5" Control Cabinet " Opening 0-1/ Ins. Track 30-5/ 3-5/ -3/ 1" -1/4" 11-1/" " 3A 30" 1 5 4B Suggested Table Construction Plan View End View Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC / Fax: 336/ N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 800/ Fax: 905/

4 10" 64" " 6B 4" 4" 8-1/" 5 4B 3" 5" 15-1/" RINSE PRE 1 5" 3 0-3/4" 1" Open 58-1/" 10" 64" " 6B 4" 4" 3" 5" 8-1/" 5 4B 1B 15-1/" RINSE PRE BSTR 1 5" 3 0-3/4" 1" Open 58-1/" Without Booster With Booster Right-to-Left Operation 1-1/" Can be up to 10" 1-3/4" 5/ 6B " 1-1/" 1 10" 14-1/" 56-1/" 1 5" Wall 38-1/" Nom. 36-1/ 5" 3-5/ Control Cabinet -1/" " " Opening 0-1/ Ins. Track 30-5/ -3/ 1" -1/4" 5 4B 1 " 30" 3A 11-1/" Suggested Table Construction Plan View End View Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC / Fax: 336/ N. Service Road, Jordan Station, Ontario, Canada L0R 1S0 800/ Fax: 905/

5 Volume crated: Shipping weight crated: 175 cu. ft lbs. Dimensions shown in inches Utilities 1 Electrical A connection (see Table A) B Booster connection (see Table B) Hot Water 3/4" NPT 180 F/8 C min. hot water connection. ( without booster.) 3/4" NPT 140 F/60 C min. hot water connection. (40 F/ C rise booster) 3/4" NPT 110 F/49 C min. hot water connection. (70 F/39 C rise booster) Flow pressure 0- psi. 3 Drain 1-1/" NPT machine connection. Maximum flow 15 gpm. 4 Steam A 3/4" NPT machine connection. Flow pressure PSI. (Steam coil) B 3/4" NPT machine connection. Flow pressure PSI. (Steam injector) 5 Condensate (no back pressure) 1/" NPT machine return to boiler 6 Vents A end: 00 1/4" S.P. B Unload end: 400 1/4" S.P. (With blower-dryer increase room ventilation by 600 CFM.) Warning: and electrical connections should be made by qualified personnel who will observe all the applicable plumbing, sanitary, safety codes and the National Electrical Code. Note: Water Hammer Arrestor (meeting ASSE-1010 standard or equivalent) to be supplied (by others) in common water supply line at service connection. Notes: Because of the variation in house-supplied steam and water pressures, steam and water pressure regulating valves (PRVs) may be needed. (Water PRV is standard on machines with booster.) The PRVs can either be purchased from Champion or obtained locally. Venting Notes: Fabricated duct size: 3-7/ x 15-7/ (Outside dimensions) TABLE A - MACHINE CONNECTION only 08/60/ /60/ /60/ /60/ /60/ /60/ TABLE B - BOOSTER CONNECTION 40 F/ C Rise - 15kW Electric built-in booster 08/60/ /60/ /60/ /60/ F/39 C Rise 4kW Electric built-in booster 08/60/ /60/ /60/ /60/ and steam built-in booster 08/60/ /60/ /60/ /60/ /60/ /60/ SPECIFICATIONS Capacity Racks per hr. (NSF rated) 77 Wash tank (US gal.) 1 Conveyor speed (ft/min.) 7.7 Motor Horsepower Drive Prewash 1 Wash Rinse Water Consumption US Gal. per hr. (max. use) 14 US Gal. per rack.45 Heating Tank Heat, electric (kw) 5 Tank heat, steam (lbs/hr. required at 15 PSI flow pressure) 75 Electric booster (built-in) (kw supplied for 40 F rise) 15 Electric booster (kw supplied for 70 F rise) 4 Steam booster (lbs./hr. required for 40 F rise) 10 Steam booster (lbs./hr. required for 70 F rise) 05 Venting end (minimum CFM) 00 Unload end (minimum CFM) 400 Standard 0" x 0" rack complement Peg Flat 1 Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice. Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC / Fax: 336/

6 RACK CONVEYOR MODEL 86 PW OPTIONS & ACCESSORIES Tank heat: choice of steam coil, steam injector, hot water coil Blower-dryer with 60" hood, table, legs and pawl bar assembly Booster Heaters - stainless steel (completely interplumbed, controls are interwired) Electric: 15 kw booster (40 F rise only) (built-in 3 phase only) Electric: 4 kw booster (70 F max. rise) (3 phase only) Steam: 40 F - 70 F rise Cantilever sideloader (with or without hood) for 90 load operation Extended pawl bar (extended drive unit) for use with load tabling 90 Motorized rack advance conveyor (unload) 180 Motorized rack advance conveyor (unload) Racks: peg or flat racks (specify type) Roller conveyor table (mobile or stationary) Steam pressure regulating valve (unmounted) Table limit switch, unmounted (recommended on all rack conveyor installations) Vent cowl, stainless steel with stack and locking damper Extended Vent hood, stainless steel with stack and locking damper Water pressure regulating valve (unmounted) (standard with booster) Vent fan control Model MRA Motorized Rack Advance Curve (Must be ordered with Roller Conveyor Table) Model MRA Motorized Rack Advance Curve (Must be ordered with Roller Conveyor Table) Model RCT 64 or RCT 84 Roller Conveyor Table Cantilever Sideloader (no hood) Due to an ongoing value analysis program at Champion, specifications contained in this catalog are subject to change without notice. Champion Industries, Inc., P. O. Box 4149, Winston-Salem, NC / Fax: 336/

Model 80 DRHDPW 44 Single Tank with 36 Heavy Duty Prewash High Temperature Rack Conveyor Dishwashing Machine with

Model 80 DRHDPW 44 Single Tank with 36 Heavy Duty Prewash High Temperature Rack Conveyor Dishwashing Machine with Standard Features ENERGY STAR Qualified Exclusive DualRinse Technology Dual-pawl cradle drive system One-piece cast stainless steel upper & lower spray arm assemblies Internal removable scrap basket and