KTM-TROXLER TROXLER. Winery machinery Technology in stainless steel. Innovations for your future made by -TROXLER
|
|
- Lesley Simmons
- 5 years ago
- Views:
Transcription
1 KTM-TROXLER TROXLER Winery machinery Technology in stainless steel Innovations for your future made by -TROXLER 1
2 Contents KTM red winemaking systems 3-5 Bottling and sealing machine 6-7 Sealer 8-10 Sulphuriser 11 Hot bottling unit Bottling units How You can find us 16 TROXLER In the production of our products we use stainless steel (V2A) almost exclusively, or materials that have been approved for the food and drink industry. We are happy to answer any queries regarding our products on tel Monday to Friday from 8.00 to noon and to You can reach us: by telephone (0) by fax (0) by by Internet Company address: KTM-TROXLER Winery machinery technology in stainless steel In der Rohrmatt 8 D Ettenheim Münchweier 2
3 KTM-TROXLER Red Winemaking System Series BT opened open In an opened tank of litres Comprising: Immersion paddle set with control system, tank (2,000 4,000 litres) with either a flat or a 3 inclined floor according to choice, double jacket for heating or cooling. Tanks (5,000 9,000 litres) standard with 3 inclined floor and double jacket. Tank door 540 x 420 at tank floor level, opening outwards and upwards. The mash can be introduced into the tank without the use of a pump. Can be used all the year round as a floating cover tank (that is always full). Optional tank under-frame supports with or without lifting shoes or transport and lifting sockets for forklift trucks and platform lift trucks. Red Winemaking System Series BTD closed In a closed tank of litres Comprising: Immersion paddle set with control system, tank with a 3 inclined floor and double jacket for heating or cooling. Tank door 540 x 420 at tank floor level, opening outwards and upwards. Can be used as a fully adequate storage tank with swivel fitting. Tank under-frames with or without lifting shoes according to choice. closed 3
4 Technology behind the KTM red wine immersion paddle system Why does the paddle rotate? The traversing ram is driven by compressed air. For the downward immersion movement the moveable blades of the paddle lie on top of the mash. The paddle moves down through a part of the mash cake in a horizontal position. In the subsequent upwards movement the paddles tilt to 45. As a result of the lateral pressure of the mash on the paddle the latter automatically rotates a little during the upward movement, and emerges at another position. (The paddle screws its way, so to speak, through the mash to the surface.) In this way the mash cake is always being displaced and pushed downwards at another position. This process is modelled on the classical process of mash fermentation with gentle hand plunging. The rotation corresponds to the displacement produced by the masher. The rotary movement allows paddles with small surface areas to be used. The force required for the immersion process is therefore small. After approx downward and upward movements the mash cake is completely immersed. With the control system the intervals and the number of such movements can be adjusted (e.g. every 4 hours 15 times up and down). The rounded and enclosed profile of the paddles ensures gentle treatment of the mash. With the KTM immersion paddles that we have developed rotation is automatic without the need for any additional drive. For the production of top quality wines gentle treatment of the grapes and mash is important. The aim is therefore to avoid pumping and contacting movements as far as possible during treatment. This can be achieved in the open tanks of the KTM immersion paddle system. The grapes are fed gently to the stalk separator, e.g. by tipping into the stalk separator or by feeding via a conveyor belt. The mash can be directly stalk separated in the tank, or by means of containers tipped into the fermentation tank, or fed via the conveyor belt. For the fermentation process the immersion paddle unit is mounted directly on top of the tank. By means of the double jacket the mash can be heated or cooled to the desired fermentation temperature. After the fermentation the mash is fed gently to the press. If the tank is located above the press it can be emptied by gravity without any de-juicing process. A transfer of the de-juiced mash in containers and subsequent tipping or emptying into the press is always an alternative. Corresponding to the container sizes there are various heights available for the tank under-frames. Transfer of the de-juiced mash on to a conveyor belt and transport into the press. With container sizes up to approx. 3,000 litres the de-juiced containers can be lifted above the press and emptied using a forklift truck, or tipped using a rotating mounting. 4
5 Tanks and tank accessories KTM-TROXLER Lifting mounting Electro-pneumatic control system Immersion paddle Sliding latch MS 600 MS 900 Viewing cover Paddle Mash filter MS 1500 Tank under-frame Open KTM red winemaking system Type BT tank x=according to choice Litres Tank height (H) Cooling jacket m 2 Inclined floor 3 Frame 30 cm Frame 70 cm Frame according to x x x x x x x x x x ,5 x x x x x ,5 x x x x x ,5 yes x x x ,5 yes x x x ,5 yes x x x ,5 yes x x x H Closed KTM red winemaking system Type BTD tank Litres Tank height (H) Cooling jacket m 2 Inclined floor 3 x=according to choice Frame 30 cm Frame 70 cm Frame according to ,5 yes x x x ,5 yes x x x x6,0 yes x x x x7,0 yes x x x x7,5 yes x x x H Tank under-frame with lifting shoes Thread connector NW15 for - Bi-metallic display thermometer with immersion sleeve fitting NW15 - Connecting nut or blind nut BM015 - Sample tap NW15 or blind nut NW15 Drilling Ø 48 mm for flap valve Threaded connector NW50 for disc valve, Ball valve or blind nut 5
6 Bottling and sealing machine TA 1600 Everything in one machine TA1600K-10 Natural corks Screw caps Crown corks Filling and sealing separately or in combination Filling unit for 10 or 14 stations. The bottles are introduced into the reception star by hand and filled by gravity. For safety an automatic shut-off system is installed. The filling capacity can be controlled electronically. The filling height can be continuously adjusted. The sealing unit is driven with a pneumatic ram. The bottling and sealing unit can be easily adjusted electrically to the bottle height. The reception star can be quickly and easily changed over for different bottle diameters. One reception star (for bottles Ø 76 90) is contained in the standard supply package. Buffer roller conveyor and many other accessories available Screw caps Crown corks Natural corks 6
7 Bottling and sealing machine KTM-TROXLER TAS 1600 For screw caps TAC 1600 For crown corks The bottling unit is adopted from the TA The sealing unit from the TV If only one type of sealing is to be used this is a high quality, but more economical, alternative to the TA A conversion set for the hot bottling of juices can be supplied. TAS TAC1600 Fig. Crown cork sorter Also for juices Technical data TA TA TAS/TAC TAS/TAC Filling stations Capacity approx. litres/hour Capacity approx. bottles/hour Bottle height up to mm Bottle Ø Cork Ø Cork height Tank contents litres Air requirement for sealing unit approx. 250 litres/min. approx. 250 litres/min. Dimensions (L x W x H ) 1100 x900 x x900 x2200 Weight in kg Electrical supply 230V/ 0,5kW 230V/ 0,5kW 7
8 Sealer One machine TV 2000 The new sealing unit as a fully automatic system for sealing bottles and other containers (wines, other liquids) in small and large batches. With this machine the following types of sealing are possible Screw caps Long cap / Stelvin cap Natural corks Crown corks Twist-Off with many options Mod. TV2000L For tall caps (Long cap/stelvin cap) The sealing unit can easily be integrated into an existing bottling line or the bottles can be introduced manually. Different bottle diameters can be fed into the sealing unit without the need for additional components. Bottle height and bottle diameter can be adjusted quickly and easily to your requirements. In the equipment configuration for screw caps (see Fig. TV2000S) we have installed a high quality industrial screw cap; a pneumatic ram provides secure sealing. Mod. TV2000S For screw caps The caps are automatically isolated and fed to the screwing head. Because of the quick and uncomplicated disassembly of the conveyor belt and sorting unit this machine is suitable for mobile use, such as, e.g. for the hiring out of bottling equipment. Combinations of different types of seal are possible on request. An extended drive station, extended turning station, and conveyor belt extensions at entry and exit are available as optional equipment, as is a storage table. Conversion sets for different types of sealing can be provided on request. 8
9 Verschließkombination KTM-TROXLER TV 2000-Twin This combination unit has 2 sealing stations that can be supplied with different sealing units. All imaginable combinations of seals MCA/PP Long cap/stelvin cap Plastic seals Crown corks Twist-Off Natural corks are possible. Both sealing units with seal isolation and seal feed facilities are assembled ready for operation, so no conversion time is required. No tiresome conversion work Mod. TV2000SK for screw caps and natural corks Mod. TV2000SC for screw caps and natural corks Mod. TV2000SCK for screw caps crown corks and natural corks Technical data TV 2000 Capacity approx. bottles/hour 2500 Bottle height max. 450 Bottle diameter up to 120 mm Air requirement for sealing unit approx. 200 litres/min. eff. approx. 4 bar air pressure Dimensions (L x W x H) 500 x900 x2200 Weight in kg 150 Electrical supply 230 V 9
10 Linear filling unit TLF4 The bottles placed on the conveyor are lifted up from the conveyor belt directly under the filling valve and filled. In each bottling cycle one to four bottles can be filled simultaneously. A bottle halting device ahead of the filling valves controls whether the bottles that are being transported are to be filled in the current cycle, or held back for the next filling cycle. Depending upon the liquid that is being bottled the best filling process such as gravity filling, pressure filling, vacuum filling or metered filling can be used. Bottle height, bottle diameter and filling height can be simply and easily adapted. After the bottles are filled they are automatically sealed. The conveyor belt drive necessary for the bottling function is provided by the sealing unit. The TLF4 linear filling unit is therefore preferably supplied together with the TV2000 sealing unit, or on request, with other sealing units. Technical data TLF 4 Capacity approx. bottles/hour 1000 ltr. Bottle height max. 460 mm Bottle diameter mm Dimensions (L x W x H) 800 x500 x2000 Weight in kg 120 Electrical supply 230 V Sealing unit TV 900 Mod. TLF 4 with TV 2000S Our screw cap sealing unit in the semi-automatic configuration for the sealing of juices and wines in small and large batches. Simple adjustment to bottle diameter and bottle height. The bottle is fed by hand into the unit. Up to 1000 sealing processes per hour are possible. Technical data TV 900 Capacity approx. bottles/hour 1000 ltr. Bottle height max. 450 mm Bottle diameter up to 120 mm Air requirement for sealing unit approx. 100 litres/min. eff. approx. 4 bar air pressure adjustable Dimensions (L x W x H) 400 x400 x1200 Weight in kg 80 Electrical supply 230 V 10
11 Sulphuriser TS 600 TS 800 The sulphurisers sterilise the bottles with sulphurated water. This is sprayed from a canister with an electrical hose pump into the bottles. Corrosion-resistant materials such as V4A and plastic ensure a long service life. KTM-TROXLER A clean job TS 600: Sulphuriser with one nozzle. Pressing on the cup sprays water into the bottle. Capacity approx. 600 bottles per hour. TS 800: Sulphuriser with two or four spray stations, according to the configuration chosen. Two stations can also be used for washing out the bottles with water after the sulphurated water spray. As an accessory for the sterile washing process a cartridge filter and cartridge can be supplied. Capacity approx. 800 bottles per hour. Technical data TS 600 TS 800 Electrical supply 220V / 100W Dimensions (L x W x H) 360 x400 x x440 x900 Weight in kg
12 Hot bottling unit THA 100 Heating and bottling of fruit juices With the hot bottling unit fruit juices can be heated and bottled. There is a choice between two standard units with either a 9 or 18 kw heating element. A tube heat exchanger gently heats the fruit juice in a water bath. The electronic temperature control holds constant the temperature set for the water bath. A dry-out protection device is installed. All current types of bottles can be filled by means of the bottling module. The bottling module can easily be adjusted to different bottle heights, bottle diameters and filling heights. Start of bottling occurs automatically when the bottle is placed under the valve. Filling stops automatically when the bottle is full. A digital thermometer monitors the juice exit temperature before the start of the filling process. As an option other containers, e.g. bag in a box can also be filled. For all current types of bottles THA with AG 2 and supply tank Electrical supply 9 kw 18 kw Filling valve 1 2 Capacity approx. litres/hour ltr. 200 ltr. Water supply tank 100 ltr. 100 ltr. Juice supply tank 65 ltr. 65 ltr. Dimensions (Ø x H) 440 x x1580 Weight in kg 41 kg 43 kg 12
13 Gas-fired heater with heat exchanger For increasing the filling performance of the THA hot bottling unit KTM-TROXLER By using our new design of pre-heating unit with gas-fired heater and heat exchanger the filling performance can be increased by approx. 150 litres. The gas-fired heater is supplied with 18 or 24 kw according to choice, gas connection via a R 1/2 ball valve and air/exhaust duct connections (LAF) on a stainless steel frame with a station for straightforward installation of the existing THA hot bottling unit. It can be operated with natural gas (20 mbar) or liquefied gas (50 mbar). The heat exchanger that is supplied as part of the preheater unit package is made from V2A corrugated tube DN20. It is integrated into a cover that fits onto the juice supply tank of the THA hot bottling unit. The heat exchanger heats the juice to between 50 and 60. A bottling module with three stations is recommended. The bottling module can be extended to 3 stations as required. Heat exchanger for external heat sources If an external heat source such as, e.g. a heating system, gas burner, wood-fired boiler or similar, is available the heat exchanger can be used to pre-heat the juice in the supply tank of the THA hot bottling unit. THA with AG 3, supply tank, gas-fired heater and heat exchanger It is made from V2A corrugated tube DN20 and is integrated into a cover that fits onto the juice supply tank of the THA hot bottling unit. 2 connecting hoses (each 2 metres in length) can be supplied with stainless steel jackets as accessories for the heater or burner. Heat exchanger inverted for easy cleaning 13 13
14 Gravity bottling units TA2 /TA3 bottling unit The TA2 bottling unit has two filling valves and the TA3 has three. The standard supply tank is made from plexiglass. Supply tanks made from glass or stainless steel are also available as an option. The bottling unit is easily adjusted to different bottle heights, bottle diameters and filling heights. The filling process starts automatically when the bottle is pushed under the valve and stops when the bottle is full. Bottle receptors for special bottles (Bocksbeutel, square bottles, etc) are available as accessories. TA 3 TA5 /TA8 electrical circular bottling unit The TA5 circular bottling unit has five filling valves and a supply tank made from plexiglass. A supply tank made from stainless steel is also available as an option. The TA8 circular bottling unit has five filling valves and a supply tank made from stainless steel. TA 5 Both circular bottling units have an electrical drive. The filling performance is continuously adjustable. The circular bottling units are easily adjusted to different bottle heights, bottle diameters and filling heights. The filling process starts automatically when the bottle is pushed under the valve and stops when the bottle is full. TA 8 under-frame Technical data TA 2 TA 3 TA 5 TA 8 Filling valves Filling capacity approx litres/hour Tank volume litres Bottle height up to mm Bottles Ø mm Dimensions (L x W x H) 300 x250 x x250 x1070 Ø 500 x1620 Ø 500 x1620 Weight in kg Electrical supply V/ 0,1 kw 230V/ 0,1 kw 14
15 Gravity bottling units KTM-TROXLER B400 /B600 row bottling unit Row bottling unit completely made from stainless steel with four or six filling valves and filling status display on the supply tank. Various types of bottles can be filled with the gravity-fed valves. Adjustment can be made to different bottle heights, bottle diameters and filling heights. The filling process starts automatically when the bottle is pushed under the valve and stops when the bottle is full. B 400 Technical data B 400 B 600 Filling valve 4 6 Filling capacity approx. litres/hour Bottle volume 0,5-2 ltr. 0,5-2 ltr. Dimensions (L x W x H) 500 x600 x x500 x920 Weight in kg Circular bottling units TA 10 / TA 14 The bottling unit is similar in design to the TA 1600 model, and can be selected with 10 or 14 stations. The bottles are introduced into the acquisition star and are filled by gravity. For safety an automatic shut-off system is installed. The filling capacity can be controlled electronically. The filling height can be continuously adjusted. After the filling process the bottles can either be taken out, or automatically transferred onto the conveyor belt that can be supplied as an accessory. Reception stars can be easily exchanged for different bottle diameters. One reception star is contained in the standard supply package, for bottles Ø according to choice. B 600 An all-round opportunity Technical data TA 10 TA 14 Filling valve Filling capacity approx. litres/hour Capacity approx. bottles Tank volume litres Bottle height mm Bottles Ø (internal) mm Dimensions (L x W x H) 1200x900x x1000x2000 Weight in kg Electrical supply 230V 230V TA 10 15
16 This is how you can find us Route description: A5 Basel-Karlsruhe approx. 80 km south of Karlsruhe approx. 30 km north of Freiburg Ettenheim N 57 junction Take easterly direction towards Ettenheim In 0.8 km cross over the KA FR railway line In 1.2 km cross over the B3 OG FR road In 0.9 km enter Ettenheim (take the through road in the direction of Münchweier) Strasbourg In 1.5 km leave Ettenheim In 1.5 km enter Münchweier In 0.2 km at the crossroads first exit in the direction of Broggingen Rohrmatt In 0.4 km last option right in the Rohrmatt In 0.2 km the company is on the left -TROXLER Exit N57 Ettenheim Karlsruhe A5 Offenburg B3 Lahr Kippenheim Mahlberg Münchweier Ettenheim Herbolzheim Winery machinery technology in stainless steel In der Rohrmatt 8 D Ettenheim-Münchweier Emmendingen telephone (0) fax (0) Colmar A5 Freiburg B3 info@ktm-troxler.de internet Basel 16
The finest fruit processing
www.obstverarbeitung-holstein.de www.a-holstein.de The finest fruit processing Innovative solutions for high quality fruit juices Fruit processing perfection As a manufacturer of fruit processing machines
More informationRA 701 B Batterie assembling. As at: 01/15/10 Time:21:19
Batterie assembling As at: 01/15/10 Time:21:19 Batterie assembling As at: 01/15/10 Time:21:19 Pos. Description Reference 01 Battery container 701.210 02 Guide rail 710.356 03 Hexagon screw M 6x12 P...486
More information+91-8048737050 M. G. Industries http://www.mgindustriesindia.com/ We are a recognized organization of the industry, involved in manufacturing, trading and supplying a commendable array of Food and Soft
More informationCONDITIONS OF SALE AND WARRANTY
M.E.P. Mbl 100 Monoblock - Operator s handbook CONDITIONS OF SALE AND WARRANTY 1. Read carefully this operator's handbook before operating our Mbl 100 Monoblock. 2. M.E.P. guarantees his Mbl 100 Monoblock
More informationBALE BREAKER AND OPENERS
BALE BREAKER AND OPENERS 13 Automatic Bale Plucker is used to mechanically strip fibres from pressed bales and automatically drop the fibre on to the feed table of the opening machinery at the beginning
More informationProduct overview Suction Guns, suction machines, Vac-Blast Cleaners
Product overview Suction Guns, suction machines, Vac-Blast Cleaners micro-cleaning for your products 3300_EN_20141020_Sauggeraete_Gesamtprogramm TiS Intelligent air utilisation Compressed air passes a
More information1. STANDARD CONTINUOUS LAMINATING MACHINE FOR THE PRODUCTION OF FLAT WALL PANELS
Proposal and Specification for the supply of continuous Caterpillar Laminating Press to manufacture insulated Wall and DPR Roof panels from Mineral Wool and Expanded Polystyrene (EPS) and PIR/PUR (PU BLOCK)
More informationTank systems. Layered tank Solar layered tank Hygienic layered tank Modular layered tank Hot water tank NEW:
Tank systems Layered tank Solar layered tank Hygienic layered tank Modular layered tank Hot water tank NEW: NEOPOR AND FLEECE INSULATION SENSOR TERMINAL STRIP ADJUSTABLE FEET www.froeling.com Energy management
More information64 Beverage dispensing
The German Patent Classification, Class 64 Page 1 64 Beverage dispensing 64a 64b 64c Bottles and their closures, closure-connected opening devices, containers for preserves, cans and opening devices combined
More informationSeidenader. for Tablets and Capsules
Seidenader Inspection Machines Seidenader Inspection and Sorting Machines for Tablets and Capsules The family of Seidenader inspection and sorting machines is a system designed to increase packing line
More informationHAND-OPERATED GREASE PUMPS 181
HAND-OPERATED GREASE PUMPS 181 182 MANUAL GREASE PUMPS Art.68012 Art.68113 Pedal and hand-operated portable grease pumps. For practical and safe greasing anywhere, and on any motor vehicle and/or machinery.
More informationSINGLE LEVER CERAMIC DISC MANUAL SHOWER VALVE
SINGLE LEVER CERAMIC DISC MANUAL SHOWER VALVE (exposed/concealed) Shower control handles concealing plate & elbow may differ depending on Model OWNER S GUIDE Issue two INTRODUCTION This owner s guide shows
More informationInstallation and Operating Instructions DÜRR Regeneration Unit for X-ray developers XR 24, XR24 II, XR 24 Nova, XR 24 Pro
Installation and Operating Instructions DÜRR Regeneration Unit for X-ray developers XR 24, XR24 II, XR 24 Nova, XR 24 Pro 2006/01 Content Important Information 1. Notes... 3 1.1 CE - Labeling... 3 1.2
More informationCompact, versatile and energy saving!!!
Compact, versatile and energy saving!!! Bar 10 C85N 20-25-B Compact, versatile and energy saving!!! ModulBlock range of machines feature the possibility to supply tailor-made solutions, enabling to combine
More informationTetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer
Tetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer Here shown with Tetra Pak Volumetric Bottom Filler Highlights Increased efficiency with servo controlled mould table index, extractor functions
More informationTetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer
Tetra Pak Rotary Moulder 35 A2 Moulded stick novelty freezer Here shown with Tetra Pak Volumetric Bottom Filler Highlights Operating principle Increased efficiency with servo controlled mould table index,
More informationInstallation, Operating and Servicing Instructions
Installation, Operating and Servicing Instructions Wall Mounted Water Boiler WMB3F/B,WMB3F/W Please make a note of your product details for future use: Date Purchased: Model Number: Serial Number: Dealer:
More informationRA 431 B Angled tube. As at: 01/15/10 Time:17:17
Angled tube As at: 01/15/10 Time:17:17 Angled tube As at: 01/15/10 Time:17:17 Pos. Description Reference 01 Lower angled tube 436.255 02 Disk 436.340 03 Cylindrical screw M 10x35 P...487 HA 04 Upper handle
More informationVortex 15/21 Utility and Outdoor Module Vortex Combi 21 and Outdoor Vortex Combi 21
Part No. DOC 38 Rev. 02 January 2007 SUPPLEMENTARY INSTALLATION and SERVICING INSTRUCTIONS Vortex 15/21 Utility and Outdoor Module Vortex Combi 21 and Outdoor Vortex Combi 21 For use with Kerosene only
More informationSHOWER PUMPS. Installation Manual. 1.5 bar and 2.0 bar
SHOWER PUMPS 1.5 bar and 2.0 bar Twin and single ended pumps designed specifically for gravity feed or stored water systems where the hot water is fed from a hot water cylinder and the cold from a cold
More informationTW Compact Accessoires-Carpet tool, 2-nozzles. As at: 01/18/10 Time:18:16
Accessoires-Carpet tool, 2-nozzles As at: 01/18/10 Time:18:16 Accessoires-Carpet tool, 2-nozzles As at: 01/18/10 Time:18:16 Pos. Description Reference 01 Carpet tool complete, including items 2-22 602.000
More informationFrom Fruit to Premium Distillate to Flavorsome Fruit Juice
www.obstverarbeitung.com www.a-holstein.de From Fruit to Premium Distillate to Flavorsome Fruit Juice Stir Pump Wash Convey Grind Press Store Pasteurize Fruit Processing Equipment Table of Contents Excellent
More informationTechnical information Installation instructions. Modul-plus (F21-52) High performance calorifiers
Technical information Installation instructions Modul-plus (F21-52) High performance calorifiers These instructions apply to the following types: 5/6-Modul-plus F (21) 5/6-Modul-plus F (31) 5/6-Modul-plus
More informationOperating Manual. Reverse Osmosis Water Purifier. MELAdem 55
Operating Manual Reverse Osmosis Water Purifier MELAdem 55 Dear Doctor, Thank you for placing your trust in this reverse osmosis water purifier. Since 1951, MELAG has specialised in the production of sterilisation
More informationANNEXURE-A SPECIFICATIONS FOR HOT MIX PLANT
ANNEXURE-A SPECIFICATIONS FOR HOT MIX PLANT COLD AGGREGATE BIN FEEDER FEEDING HOPPERS Four Nos. Cold aggregates hopper with a heaped capacity of approx. 52 T. Wide opening bin width to accommodate different
More informationThermostatic bar mixer valve with adjustable head Installation guide
Bar valve Thermostatic bar mixer valve with adjustable head Installation guide Index Introduction p.3 - Safety information p.3 - Product specification p.3 Connection to supplies p.3 - Flushing p.4 - Filters
More informationBelt Press EBP Belt Press EBP /15. English
Belt Press EBP 1200 Belt Press EBP 1200 12/15 English Flavourful quality Natural juices Naturally unfiltered fruit and vegetable juices represent an important and tasty part of a healthy and balanced diet.
More informationHDC Standard. Stationary high-pressure cleaner for the simultaneous use of 2 to 8 take-off points. Modular design. Intelligent pump control
HDC Standard Stationary high-pressure cleaner for the simultaneous use of 2 to 8 take-off points 1 Modular design The HDC systems can be equipped with up to 4 pumps depending on the requirements. This
More informationAUDION PACKAGING MACHINES SHRINK WRAP EQUIPMENT
AUDION PACKAGING MACHINES SHRINK WRAP EQUIPMENT SHRINK WRAP EQUIPMENT SHRINK WRAP EQUIPMENT 3 Shrink wrap equipment Basic shrink wrap equipment Audion basic shrink wrap equipment offers you the best solution
More informationCold water compact class HD 5/11 C. Standard accessories: Trigger gun Extended highpressure. Technical data
Cold water compact class HD 5/11 C Compact cold-water high pressure cleaner. With its compact dimensions, robust construction and greatest possible manoeuvrability, this unit is a credit to the compact
More informationPUMPKIN SEED HARVESTING TECHNOLOGY 2019
PUMPKIN SEED HARVESTING TECHNOLOGY 2019 Moty GmbH Piesing 20, AT 4846 Redlham office@moty.at www.moty.at Engineering changes, literal mistakes and prices are subjects to change Your reliable partner for
More informationEvaporators. In this section. Rotary Evaporators Crystalisation Distillation Drying Reflux Solution Concentration Volatiles Glassware
Cometa Cientifica s.l. In this section Rotary Crystalisation Distillation Drying Reflux Solution Concentration Volatiles Glassware 162 Rotary LABO ROTA 4000, 4001, 4002 and 4003 Features Distillation with
More informationTurboboost SHOWER PUMPS. Installation Manual. 1.5 bar and 2.0 bar
Turboboost SHOWER PUMPS 1.5 bar and 2.0 bar Twin and single ended pumps designed specifically for gravity feed or stored water systems where the hot water is fed from a hot water cylinder and the cold
More informationBoretech China Make, Pet Bottles Recycling Line Ref Id SM4325 (Details-Specification mentioned hereunder are for indicative purpose only) DESIGN DATA 1.1 Capacity - PET bottles input : 1,500 kg/h - Dry
More information...just the right thing for everyone - individually adapted
...just the right thing for everyone - individually adapted Hellmich has been developing clever solutions for dedusting and flue gas cleaning, for pipelines and apparatus engineering for over 45 years.
More informationPlease tape down. NewTeam Ltd. Customer Service Dept. Brunel Road Earlstrees Industrial Estate Corby Northants NN17 4JW
3rd Fold 1st Fold NewTeam Ltd. Customer Service Dept. Brunel Road Earlstrees Industrial Estate Corby Northants NN17 4JW 2nd Fold Please tape down Please tape down Affix Stamp Installation Instructions
More informationMSMCR. Counter-Rotating Blenders. I Application. I Principle of operation
MS I Application Counter-rotating blenders are used for mixing and homogenizing dispersed products at a controlled temperature with an optimum performance, regardless of the product viscosity. These units
More informationUser s Manual MATRIX A MATRIX S MATRIX A. Filtro de aspiración Movil Matrix Tel.
Filtro de aspiración Movil Matrix 1000 User s Manual Filtering unit Tel. 976 359 352 MATRIX-1000-1-S MATRIX-1000-1-A MATRIX-1000-2-S MATRIX-1000-2-A email. albis@albis.net www.aspiraciondehumos.com KLIMAWENT
More informationNT 27/1 Me. All-purpose vacuum cleaner built for demanding cleaning applications, with stainless steel container. On-board accessory storage
NT 27/1 Me All-purpose vacuum cleaner built for demanding cleaning applications, with stainless steel container 1 On-board accessory storage 3 Robust metal latches All of the accessories can be stowed
More informationPowerDry. High Capacity Dryers P A R T N E R I N L A U N D R Y T E C H N O L O G Y
PowerDry High Capacity Dryers P A R T N E R I N L A U N D R Y T E C H N O L O G Y High Capacity Dryers: PowerDry Universal application Heating unit A universal dryer, which can be used for pre drying,
More informationWith combustion engine HD 728 B Cage. Equipment: Trigger gun Extended highpressure. Technical data
With combustion engine HD 728 B Cage Cold water high-pressure cleaner with Honda 5.5hp petrol engine for use where no electrical connection is available. With protective tubular steel frame. Equipment:
More informationInstallation and operating instructions. DK energy storage and DK energy buffer
Installation and operating instructions DK energy storage and DK energy buffer Edition: 08-2015 1 Preliminary note With this DK energy storage / DK energy buffer you purchased a DK quality product. The
More informationDELLA TOFFOLA PERISTALTIC OPEN THROAT MUST PUMPS MODELS AVAILABLE DELLA TOFFOLA ELLIPTICAL OPEN THROAT MUST PUMP MODELS AVAILABLE
PUMPS 2 S MUST/LIQUID PUMPS LIQUID PUMPS S DELLA TOFFOLA PERISTALTIC OPEN THROAT USE: Peristaltic pump suitable for transferring whole or crushed grapes by continuous gentle compression of a silicon bladder.
More informationInline Cup Filler. AFIC - Series
M a c h i n e r y Inline Cup Filler AFIC - Series Inline Cup Filler Principle Function: The highly flexible and hygienic Inline Cup Filler, from the series AFIC, is solidly built and easy to operate. This
More informationVacuum drying oven for non-flammable solvents
VD series 53 Vacuum drying ovens Vacuum drying oven for non-flammable solvents A BINDER vacuum drying oven of the VD series is impressive while gently drying with its homogeneous temperature distribution.
More informationCleaning unit for coolant. :_decftez`_>r_fr] Book No.: V2
Cleaning unit for coolant :_decftez`_>r_fr] Book No.: 1271526-02 V2 Alfa Laval Separation AB Separator Manuals, dept. SKEL S-147 80 Tumba, Sweden Telephone: +46 8 53 06 50 00 Telefax: +46 8 53 03 10 40
More information2x58 MW Coal Fired Power Plant at Mauritius
2x58 MW Coal Fired Power Plant at Mauritius The coal-fired power plant produces electricity by the burning of coal and air in a Circulating Fluidized Bed Combustion Boiler (CFBC), where it heats water
More informationHOW TO SELECT AN INDIRECT THERMAL TECHNOLOGY FOR INDUSTRIAL MATERIALS PROCESSING
white paper HOW TO SELECT AN INDIRECT THERMAL TECHNOLOGY FOR INDUSTRIAL MATERIALS PROCESSING Better Thermal Processing Results Begin with Selecting the Right Technology Authored by Rob Grady Director of
More informationBoiler Technical Specifications (2013)
ACT Bioenergy Boiler Dimensions 0.5-0.85 Million Btu/h (150-250kW) Model CP500 CP600 CP750 CP850 Heat Output in MBtu/h (kw) 510 (150) 610 (180) 750 (220) 850 (250) Height ft (mm) 6 1 (1855) 6 1 (1855)
More informationInstalling the Vacuklav 40-B / 44-B
Installing the Vacuklav 0-B / -B Please read the operating manuals of the autoclave and of the water purification unit first! The Vacuklav 0-B / -B are autoclaves with fractionating pulsed vacuum procedure.
More informationSafety vacuum drying oven for flammable solvents
VDL series 53 Vacuum drying ovens Safety vacuum drying oven for flammable solvents A BINDER safety vacuum drying oven of the VDL series ensures maximum safety when drying organic solvents standard with
More informationMIDAS. Installation instructions 110/220
MIDAS Installation instructions 110/220 INDEX INTRODUCTION Page 3 Safety information Page 3 Product specification Page 3 Important information CONNECTION TO SUPPLIES Page 4 Flushing Page 4 Filters Page
More informationCold water HD 9/18-4 ST
Cold water HD 9/18-4 ST The space-saving stationary high-pressure cleaners from Kärcher with up to 6 supply points can be individually configured according to requirements and impress with low wear and
More informationEquipment Information
ST98-600 Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION Sealed Air GmbH Customer Systems Center D4 Park 4 CH-6039 Root-Längenbold Telephone: +41 (0)
More informationMTM Advanced Bottling Systems
MTM Advanced Bottling Systems Quality Bottling and Packaging Equipment PRODUCT RANGE FOR PRODUCERS AND FILLERS OF CARBONATED SOFT DRINKS ABOUT US MTM Advanced Bottling Systems is located in Rockford, Illinois,
More informationCold water compact class HD 5/15 C
Cold water compact class HD 5/15 C Cold-water pressure washer for daily commercial use. With its compact dimensions, robust construction and greatest possible manoeuvrability, this unit is a credit to
More information+91-8048762692 Modern Flexi Packaging System Private Limited http://www.modernflexipackaging.com/ We are highly recognized firm engaged in manufacturing, exporting, supplying and trading wide assortment
More informationWith combustion engine HD 801 B. Equipment: Trigger gun Extended highpressure. Technical data
With combustion engine HD 801 B Cold water high-pressure cleaner with Honda 5.5hp petrol engine for use where no electrical connection is available. Equipment: Trigger gun Extended highpressure trigger
More informationCustomized Packaging Machinery. Product Overview Liquid Filling Labelling Capping Conveyors Specialised Automation
Customized Packaging Machinery Product Overview Liquid Filling Labelling Capping Conveyors Specialised Automation Mission Statement Company Profile Tigre Solutions aims to supply professional services
More informationINTADUO THERMOSTATIC BATH/SHOWER MIXER
INTADUO THERMOSTATIC BATH/SHOWER MIXER INSTALLATION, OPERATING AND MAINTENANCE PLEASE LEAVE THESE INSTRUCTIONS WITH THE USER INTRODUCTION This installation guide has been produced for the Inta range of
More informationSPECIAL PRICE PROMOTION. WORKSHOP EQUIPMENT. CLEANING EQUIPMENT; WELDING RIG; WELDING SAFETY WALL.
Wet/dry vacuum. - This single-motor wet/dry vacuum is equipped with a fully automatic filter cleaning system. - The product also has an equipment socket with automatic switch on/off. - Vacuum up even volumes
More informationAccumulator tank. 1000, 750 and 500 litres Aqualux Teknik Aqualux UB Aqualux 750 CU
Installation, operation and maintenance Accumulator tank 1000, 750 and 500 litres Aqualux Teknik Aqualux B Aqualux 750 C Aqualux 750 Teknik with bivalent shunt, optional extra 2012-02-08 ver.: Supersedes:
More informationSupplementary Operating Manual for Cutting mill combination
Supplementary Operating Manual for Cutting mill combination comprising of Universal cutting mill "pulverisette 19" Power cutting mill "pulverisette 25" Sample splitter Suction unit Fritsch GmbH Manufacturers
More informationRif Cod i220-0
15 52 50 6 13 53 51 2 9 8 3 20 19 18 5 1 7 14 10 4 17 Rif Cod 1 0010060 2 0060287 3 0060310 4 0080003 5 0080004 6 0080051 7 0080053 8 0080410 9 0080413 10 0080430 11 0080432 12 0080434 13 0080435 14 0080436
More informationTMCI Padovan Evaporators
TMCI Padovan Evaporators Evaporators Our range includes 4 types of evaporators: Forced Circulation Falling Film Evaporators Plates Thin Film Concentration systems Evaporator choosing criteria: product
More informationEquipment Information
STE98-800 Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION Sealed Air GmbH Customer Systems Center D4 Park 4 CH-6039 Root-Längenbold Telephone: +41
More informationControl unit PPT/RS,, Controls the functions of the conveyor. Fully pneumatic. The maximum recommended distance between the conveyor and contr
Control unit PPT/RS,, 0111636 Controls the functions of the conveyor. Fully pneumatic. The maximum recommended distance between the conveyor and control unit is 10 metres when feed pressure is 0.6 MPa.
More informationSECOND HAND ASPHALT PALANT FOR SALE
. BITUMEN STORAGE DREDGING EQUIPMENT QUARRY INSTALLATIONS. Unit 1, Burnhouse Industrial Estate, Burnhouse Industrial Estate, Whitburn, West Lothian, EH47 0LQ SECOND HAND ASPHALT PALANT FOR SALE Manufacturer:
More informationNT 27/1. Cartridge filter with float. Robust bumper. Robust metal latches
NT 27/1 The NT 27/1 is a powerful wet/dry vacuum cleaner for professional users. It is exceptionally compact and comes standard with a number of useful accessories. 1 Cartridge filter with float 3 Robust
More informationCONTINUOUS CONVEYOR DEEP-FAT FRYER
Food Processing Equipment The ProfiFry CONTINUOUS CONVEYOR DEEP-FAT FRYER The ProfiFry universal continuous conveyor deep-fat fryers are a reliable and universal solution for high-performance frying of
More informationVENCO - STANDARD PUGMILL ( NON DE-AIR )
VENCO - STANDARD PUGMILL ( NON DE-AIR ) AVAILABLE SIZES: 75mm (3") nozzle 136m (5.3") barrel 180kg/hr (400lb/hr) production Hopper opening 115x100mm [4½x4 ] L x W x H [crated] 1.08 x 0.34 x 0.37 m [43
More informationHYGIENE EQUIPMENT INTRODUCTION HYGIENE
EDITION 2015/2016 INTRODUCTION HYGIENE EU directive 64/433 introduced in the food plants the obligation to produce food in a safe way. To meet the requirements regarding hygiene for staff, machinery, equipment
More informationWATER BOILER METOS MARINE WKI MG MW,
WATER BOILER METOS MARINE WKI MG4164349MW, 4164349, 4164354, 4164356 User manual WKI10n 27.10.2015 27.10.2015 Water boiler Metos Marine WKI M L K J A B I C H G F D E fig. 1 / Abb. 1 2 Water boiler Metos
More informationWet and dry vacuum cleaners NT 27/1
Wet and dry vacuum cleaners NT 27/1 All-purpose vacuum cleaner built for demanding cleaning applications Standard accessories: Suction hose 2.5 m Metal suction tube 2 x 0.5 m Filter bag Paper Wet and dry
More informationEnzo Safe Touch Thermostatic Shower EZ10010CP & EZ10014CP
Enzo Safe Touch Thermostatic Shower EZ10010CP & EZ10014CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible. We cannot
More informationNr.1 der Technik Simply the best from Germany
Nr.1 der Technik Simply the best from Germany Breaking, cutting, mixing and emulsifying for the food stuff industry Machinery for processes in the food industry Cutter Breaker Grinder Mixer Emulsifyer
More informationOWNERS' GUIDE PRECISION WATER SYSTEMS WATER DISTILLER. Water Systems FOR MODELS: PWS MANUFACTURED BY:
PREC SION Water Systems OWNERS' GUIDE FOR MODELS: PWS 45-75 MANUFACTURED BY: PRECISION WATER SYSTEMS WATER DISTILLER PRECISION DESIGN & MANUFACTURING INC. 9024 100 STREET WESTLOCK, ALBERTA, CANADA, T7P
More informationHygiene Product Range
INDUSTRIAL WASHING MACHINES Hygiene Product Range Your one source for hygiene equipment visit us at www.indwash.co.uk CONTENTS Sterilisers 4 Handbasins 6 Washers 11 Disinfection 16 Passage wash/disinfection
More informationBOILING UNIT REDITAP. Installation and User Guide. IMPORTANT: This booklet should be left with the user after installation and demonstration
in tap Boiling water to in tap sink Drain Valve (as high as possible) REDITAP CONNECTION SUMMARY Amp mains supply cold mains water into in tap optional filter cold water in hot water BOILING UNIT Installation
More informationEmpty unit Cover Water Total weight 15 kg 8 kg 10 kg 33 kg
DE LUXE Substation Introduction The HERZ DE LUXE Substation is a firmly mounted unit for providing hot water. In contrast to a hot water boiler which heats and then stores the water before it is being
More informationJethwa Automatic Can Equip. Co. An Export Award Winning ISO 9001 Quality Certified Company
200-220 LITRES DRUM BARREL PLANT MACHINES INTRODUCTION The complete range of semi-automatic machinery and equipments for producing drum barrel and buckets in various ranges for packing edible oil, paint,
More informationNT 27/1. All-purpose vacuum cleaner built for demanding cleaning applications. Cartridge filter with float. Robust bumper. Robust metal latches
NT 27/1 All-purpose vacuum cleaner built for demanding cleaning applications 1 Cartridge filter with float 3 Robust bumper Large cartridge filter ensures constant high suction power. The float system interrupts
More informationDesign and Manufacture of Plural Component Spray Equipment and Pipe Coating machines
452F 352FX 352F 302F Metering Unit Atank (SS) B tank (SS) 450 (18 ) 350 (14 ) 350 (14 ) 300 (12 ) 132ltr (35usg) 65ltr (17usg) 65ltr (17usg) 65ltr (17usg) 65ltr (17usg) 65ltr (17usg) Feed Pumps 2 x 200/50
More informationUser and Installation Instructions. Wall Mounted Water Boiler WMB3F/B and WMB3F/W IS435 ECN3461
User and Installation Instructions Wall Mounted Water Boiler WMB3F/B and WMB3F/W IS435 ECN3461 Dear Customer Thank you for purchasing this Lincat product. With correct use and careful maintenance as described
More informationThermostatic valve bodies
Thermostatic valve bodies for single pipe heating systems Thermostatic valves with radiator connection systems IMI HEIMEIER / Thermostatic heads and Radiator valves / Thermostatic valve bodies for single
More informationEnzo Concealed Shower Mixing Valve
Enzo Concealed Shower Mixing Valve EZ40010CP, EZ40013CP & EZ40014CP Installation and Maintenance Instructions In this procedure document we have endeavoured to make the information as accurate as possible.
More informationMTM Advanced Bottling Systems
MTM Advanced Bottling Systems Quality Bottling and Packaging Equipment PRODUCT RANGE FOR PRODUCERS, BOTTLERS AND CANNERS OF BEER ABOUT US MTM Advanced Bottling Systems is located in Rockford, Illinois,
More informationCassette units Model Comfort Circle. - heating - cooling - ventilation
Cassette units Model Comfort Circle - heating - cooling - ventilation Cassette unit: Comfort Circle A comfortable room and climate are pleasant to work in and may also entice visitors to lengthen their
More informationOFICINA COMERCIAL: Núñez de Balboa, MADRID Tel: (34) Fax: (
Industrial de Transformados Metálicos, S.A. OFICINA COMERCIAL: Núñez de Balboa, 85 28006 MADRID Tel: (34) 915 776 008 Fax: (34 915 760 937 comercial@intrame.com internacional@intrame.com MEMORY DESCRIPTION
More informationCABINET PARTS REFRIGERATOR
CABINET PARTS REFRIGERATOR 1 94 Litho In U.S.A. 1 Part No. CABINET PARTS 2 2152011 Front Roller (2) 3 489393 Screw, 4 981122 Roller (Rear) (2) 5 488454 Screw 6 2155013 Clip, Grille 7 489242 Screw 9 836196
More informationSTEAM TRAPS
STEAM TRAPS 08.2016 info@ayvaz.com www.ayvaz.com SELECTION OF STEAM TRAPS In order to get maximum efficiency and service life from the steam lines and steam related systems, it is crucial to make the correct
More informationHumidifiers Dealer Parts List
Effective Date: July, 204 Revised Date: March 20, 205 Humidifiers Dealer Parts List Model 400/400M Humidifiers 6A 6B MODEL 400 MODEL 400M NO. BLUE/GRAY UNITS - PART NAME QTY/CTN PART NO. PART NO. 4B Base
More informationRise. Digital. Bath with overflow filler. Rise Digital Bath installation instuctions page 1
Rise Digital Bath with overflow filler The Waste Electrical and Electronic Equipment (Producer Responsibility) Regulation 2004 This product is outside the scope of the European Waste Electrical and Electronic
More informationSlim Line Service Manual
Slim Line Service Manual SLIM LINE Juice Machine Din återförsäljare / Your retail dealer S / EN...... Rev. 090914 List Of Contents Index Main Index List of contents page 2 General description page 3 Dispenser
More informationREVOLUTION BAGLESS CANISTER VACUUM
REVOLUTION BAGLESS CANISTER VACUUM 12901 IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING YOUR VACUUM. When using an electrical appliance, basic precautions should be observed, including
More informationOperating Manual. the semi automatic
Operating Manual for the semi automatic Injector PR Rühle GmbH Lebensmitteltechnik Beim Signauer Schachen 10 79865 Grafenhausen Tel: ++49 7748-523-0 Fax: ++49 7748-52385-00 www. Ruhle.biz User Manual PR
More informationCONNECTION OPTIONS FOR MANIFOLDS & CONTROL UNITS
CONNECTION OPTIONS FOR MANIFOLDS & CONTROL UNITS INSTALLATION INSTRUCTIONS FOR CONTROL BOXES Pay attention to the total pressure loss when connecting UV4- to the control boxes for heating areas > 16 m²!
More informationSimply Plug and Convey
Simply Plug and Convey Pneumatic vacuum transfer is the smart choice for powder and bulk material transfer By: Nick Hayes, President, Volkmann, Inc. and Thomas Ramme, Dipl.-lng. B.Eng. (Hons.), Volkmann
More informationNT 27/1. Cartridge filter with float. Robust bumper
NT 27/1 The NT 27/1 is a powerful wet/dry vacuum cleaner for professional users. It is exceptionally compact and comes standard with a number of useful accessories. 1 Cartridge filter with float 3 Robust
More informationINSTRUCTION MANUAL HAND HELD STEAM CLEANER JQ688A-1
INSTRUCTION MANUAL HAND HELD STEAM CLEANER JQ688A-1 Read these instructions carefully before using your steam cleaner. Please keep this instruction manual in safe place for future use. 1 Applicable Standards:
More information