Grease separator. Chapter contents. Grease separator for ground installation. Grease separator for freestanding. Informations.

Transcription

1 Chapter contents Separator for ground installation Ground installation Basic design up to load class: D 400 With direct suction for disposal without odour build-up With direct suction and high-pressure interior cleaning for disposal without odour build-up and simultaneous cleaning of the container. for freestanding installation With complete disposal Mobile separator for food stall or marquee Basic design for disposal via the cover Extension stage 1 for disposal via direct suction Extension stage 2 with manual high-pressure interior cleaning and optional disposal pump for disposal without odour build-up Extension stage 3 with automatic high-pressure interior cleaning and optional disposal pump and remote control for disposal without odour build-up Available in oval curved or split design for optimal installation With partial disposal Optionally available in manual or automatic design. Informations General informations Dimensioning according EN

2 j Planning references Separator General information The applications The industrial sources of waste water must ensure through appropriate pretreatment facilities that substances and liquids, which spread noxious fumes and nuisance odours, affect building materials and drainage systems or interfere with the operation, will not enter public pipes. In establishments where grease-containing waste water accumulates, grease traps according to EN 1825/DIN must be installed to guarantee the retention of greases and oils of an organic origin from the waste water. This applies, for example, for kitchen operations and meat processing plants. A double lifting plant or complete pumping station must be provided after each grease separator that is installed below the backflow level (generally the street level). The individual requirements placed on grease separators, lifting plants and complete pumping stations require adjustable product in various s and materials. ACO Haustechnik had an extensive product range of grease separators, lifting plants and complete pumping stations for the ground installation and free-standing installation for decades. The standards and tests All grease separators by ACO Haustechnik are produced according to the applicable standards EN 1825 and DIN The grease separators listed in the product range are hydraulically tested and have a general official approval, i.e. the new application permit from DIBt Berlin. The separator systems furthermore are subject to a routine inspection by the Landesgewerbeanstalt Bayern that checks the separator production for the adherence to the currently applicable test standards. The application scope Butcher shops with and without slaughter Slaughterhouses (large-scale slaughterhouses) Meat and sausage factories, with or without slaughter Utilisation of animal carcasses Poultry slaughterhouses Bowel preparation facilities Hotels Restaurants Food distribution points with return tableware Cafeterias Interstate service areas Cafeterias Kitchens in hospitals Canneries Cooking oil refineries Ready-meals manufacturer Peanut roasters Grilling, frying and deep frying kitchens Fries and chips products Principles and function A grease separator operates purely physical according to the gravity principle (density difference), i.e. heavy waste. water components sink to the bottom, light material such as animal oils and fats rise to the top in the separator. The sediments in the sludge trap and the grease layer are selectively destroyed at up to 175 bar by the high pressure jet of the special orbital cleaning head and homogenized capable of pumping. Depending on the location of the installation site, the separator content can be pumped to the disposal vehicle via an on-site permanently installed line or be further transported with an optional disposal pump. Function diagram of the grease separator according to EN

3 Separator Planning references Installation When install in the ground and when in the building? There are two installation situations for grease separators: Free standing grease separators and grease separators for underground installation. Precondition for easy disposal, maintenance and cleaning of the grease separator is a readily accessible installation location. In addition, always verify that the pipe between the accumulation point the grease containing waste water and grease separator is kept as short as possible. Furthermore, the installation may not be done in unventilated rooms or in traffic or storage areas. The setup may not be made in the vicinity of living quarters. The most important criteria that must be considered when choosing between a freestanding or underground installation are discussed in the following. Installation in the ground Installation in green spaces Manhole covers must be odour sealed. A manhole cover of Load class A 15 is sufficient. Recommendation: The location where the disposal vehicle is parked should be attached. Access routes Installation possibly outside the directly accessed area. Odour sealed manhole covers of Load class B 125 are generally sufficient. When installing directly in the roadway, a Load class D 400, odoursealed, must be provided. Courtyards Critical installation points Courtyards are critical in reference to odours during the operation and disposal: 1. During operation, odours due to loosely attached, manhole covers that are not odour sealed are possible. 2. Strong odours when opening the manhole covers during disposal. Solution Equipping the separators with a so-called direct suction. Installing the suction pipe in the ground, for example, on an exterior wall of the building, easily accessible for the disposal vehicle. Suction line preferably made of PE-HD pressure pipe minimum 6-PN 65/80 DN. The disposal via direct extraction has the distinct advantage that the manhole cover remains closed during the first suctioning process, so that an odour will not develop. The manhole covers are not opened until rinsing the disposal shaft with pressurized water from the disposal vehicle. Since the separator chamber has already been emptied by suction, the fumes were also partially extracted, so that only minimal odours occur. If the disposal vehicle is equipped with a functioning carbon filter for the tank exhaust, there will hardly be any complaints from the affected residents. 425

4 Planning references Separator Installation in buildings The installation in buildings has increased over the past 15 years. Reasons for this are that, for example, barely any open spaces are available for the underground installation due to renovations of old buildings, changes of use of existing buildings and naturally also due to the high by the high building density. s are installed in the immediate vicinity of the waste water accumulation point (EN ). Installation room The installation room must be separate, dry and provided with a functioning ventilation system. The installation area of the grease separator must be level. The waste water should be transported to the grease separator at a free drop of at least 1:50. Pumps in front of the grease separators have the serious disadvantage that grease and waste water are thoroughly mixed, the separation is hampered, and limit violations are inevitable. If unavoidable due to structural conditions, these disadvantages can be almost eliminated by using a special lifting plant with displacement pumps. The connection between the access road, installation and design The access routes to the installation room must also be observed in the free-standing installation. In order to select the proper separator, which can also be installed via stairways, winding corridors or light wells, the conditions on-site must be known. Various designs allow an installation as needed. Oval structure Adjusted to current door dimensions Separator of stainless steel NS 1 4: max. width 760 mm NS 5.5 : max. width 1,0 mm Separator of polyethylene NS 1 4: max. width 770 mm NS 5.5 : max. width 1,020 mm such as Eco-Jet OD Round structure Can be knocked down into single segments For example, recommend for access routes with a right angle Adaptation of the NS subsequently on-site is possible by exchanging centre segments (e.g. from NS 7 to NS ) Number of segments: NS 2 4: 2 segments, Ø 1,000 mm NS 7 : 3 segments, Ø 1,500 mm NS 15 20: 3 segments, Ø 1,750 mm such as Lipurat-RS divided structure Particularly suitable for renovations with narrow insertion openings Can be dismantled into 3 segments Max. segment dimensions (LxWxH): NS 2: 670 x 700 x 1,360 mm NS 4: 1,140 x 700 x 1,360 mm such as Eco-Jet G/GD Construction site welding For extreme installations (narrow stairways, elevator shafts) is delivered in single parts, welded and checked for leaks on-site such as Fapurat-PE-OAE 426

5 Separator Planning references Installation below the backflow level, lifting plant for grease separator The drainage via a double lifting plant must be guaranteed when installing the grease separator below the backflow level. The top edge of the street (curb) typically forms the backflow level for grease separators, which are installed in the basement. Almost every grease separator must therefore be drained via a double lifting plant. This should be strictly observed, especially in case of free-standing separators in buildings, even if only an occasional backflow risk exists. Lifting plant Vent pipe (separate over the roof) Backflow loop "Separators for greases with the static water level below the backflow level (see EN 752-1), must be drained via a lifting plant downstream." (Excerpt from EN , Sec 7.3) The grease separator is only suitable and approved for a pressure-free operation. Odour sealed does not mean backflow secure! When selecting the lifting plant, it must be noted that a double lifting plant is installed (regulation in the industrial and commercial sector) to ensure an uninterrupted operation in case of a pump failure. It is also important to note that a second Function of the air bubble injection Air is continuously blown into the pitot tube via a compressor. The rising air bubbles at the end of the pitot tube provide a constant movement below the pitot tube, so that float cover forming media cannot settle (such as residual grease from the separator). This guarantees is very reliably working level measurement. separation of the grease constituents can occur in the waste water after each grease separator, which would result in deposits in the lifting plant tank. Routine inspections of lifting plant in conjunction with the grease separator maintenance are therefore necessary. These grease deposits also affect the components of the level measurement, such as the float switch, the ball float switch and pitot tubes with a small cross-section negatively. Level measurements with a large dimensioned Pitot tube cross-section with air bubble injection for self-cleaning must be installed. 427

6 Planning references Separator Additional information for routing, operation and maintenance Routing, ventilation (EN ) When installing the inlet pipe through unheated or open-access areas with a frost risk, this section must be equipped with an additional pipe heater (e.g., self-regulating heating tapes and insulation). Inlet pipes require a careful design and installation, since the separator efficiency can already be positively or negatively affected here. Vertical inlet pipes must be designed as follows at the transition to the horizontal pipe, in order to prevent undue turbulence of the waste water and its grease components: Vertical downpipe, 45 bend, straight pipe section of at least 250 mm or more, 45 bend, horizontal piping in the inlet of grease separators at least x DN length long (for example: DN 0 = 1,000 mm, DN 150 = 1,500 mm). Inlet and outlet pipes on grease separators must be sufficiently ventilated. The vent line must be routed up to over the roof for this purpose. (EN ) More horizontal connecting lines longer than 5m are must also be bled. If the horizontal inlet line has a length of more than m and no other additional ventilated connecting lines, the inlet pipe must be provided by an additional vent line directly near the separator inlet. (EN ) 428

7 Separator Planning references Sampling Pros and cons of sampling shafts/ sampling pipes for the so-called integrated sampling options in the grease separator: Sampling shafts in underground installation and sampling pipe in the free-standing installation have an open pipe end on the interior of the inlet with a drop of at least 160 mm on the pipe bottom outlet to the channel (see DIN , Item 5.5.2). Proper and safe sampling by the authorities is only possible with this arrangement with the recommended wide-mouth bottle with the necessary supervision. Other key advantages of this type, especially in the underground installation, good accessibility to the outlet drain to the channel and that of the grease separator, for inspection, especially for studies with a video camera and for cleaning with the HD-street washer. Only where the drop cannot be realized due to structural conditions or the sampling shaft/sampling pipe are not installed due to the lack of space, the integrated sampling must be tolerated for cost reasons, among others (bottom drop must equal at least 30 mm - DIN , item 5.5.2). The use of an integrated sampling equipment must be clarified in advance with the authorities. Disposal (DIN , item 12.2) Sludge trap and separator must be completely emptied and cleaned at least once a month, preferably every two weeks. The separators must subsequently be refilled with water (such as drinking water, process water, treated water from the grease separator), which corresponds with the local inlet regulations. General inspection (DIN , item 12.4) Excerpt from DIN , item 12.4: "Prior to the start-up and periodically thereafter at intervals no longer than 5 years, the separators must be checked by an expert for its proper condition and proper operation after first completely emptying and cleaning." Emphasis in the inspection are primarily the dimensioning of the separator, the structural condition and seal of the separator, the condition of interior walls, fittings, electrical equipment, construction of inlet and ventilation ducts, completeness of the operation log, proof of proper disposal and the availability of required authorizations and documents. Operating log (DIN , item 12.5) An operating log must be maintained for each grease separator. The following must be entered in the log: Completed inspections, maintenance, checks and disposals. The operating logs must be stored by the operator and must be presented to the locally responsible authority upon request. Application limits Excerpts: "Materials that could affect the separator system, such as chopped coarse materials and solids, including the waste water contents from wet disposal systems, cannot be discharged. " (Excerpt DIN , Item.1) "The targeted use of biological active agents, e.g. enzyme-containing products for converting fatty substances, or the socalled self-cleaning is not acceptable. " (Excerpt DIN , Item.1) "If detergents, dish soaps, cleansing agents, disinfectants and expedients enter the waste water, they must be separator friendly and may not form stable emulsions. Dish soaps and and cleaning products should not contain or release chlorine. "(Excerpt DIN , Item.1) "Grey water, in which a significant share of grease is present in non-separable, i.e. emulsified form, for example from dairies, cheese dairies, fish processing plants or from catering services with a pure rinsing operation, as well as from Waste treatment plants are only effectively treated in grease separators under certain conditions. Another treatment of the waste water may be required." (Excerpt EN , item 4) "Systems in which waste water contains the rapidly decaying sediments, e.g. in the fish industry, no sludge trap must be installed, however, these grease separators must be equipped with a strainer or a screen... " (Excerpt from EN , Sec 4) Maintenance (DIN , item 12.3) The separator must be maintained annually by a competent person according to the manufacturer's specifications. 429

8 Dimensioning according to EN Separator General information Consignor Telephone Fax Project/installation site Replanning Reconstruction Owner Telephone Fax Offer to Information These records were received on the basis of: Telephone conversation with: Site visit with: Please note required remarks / amendments under clause 6, or on a separate sheet 430

9 Separator Dimensioning according to EN Waste water type and composition 1.1 Where is the waste water from? Boarding facility All-day commercial kitchen Hospital canteens Factory Kitchen / Canteen Hotel kitchen Specialty restaurant 1.2 Waste water contents Sediments Rapidly rotting sediments Fats Which? Density (spec. weight) = [g/cm 3 continuous l/week discontinuous l/week intermittent (e.g. malfunction) l/week Slaughterhouse/ meat processing plant Meat products plant with slaughter Meat products plant without slaughter Butcher shop with slaughter Butcher shop without slaughter Supermarket with processing / sales Poultry abattoir Rinsing and cleaning agents If rinsing and cleaning agents are used, they must be used as sparingly, in order to maintain the separability of the oils and greases as much as possible (observe the dosage amount by the manufacturer). Oil/grease processing operation Margarine factory Oil mill Cooking oil refinery Peanut roaster Fries and chips production Cannery Ready-meals manufacturing Fish processing plant Rendering plant Other waste water contents 2. Inlet conditions Residual grease content max. mg/l measured according to DN part 17 max. approved temperature at the intake C 3. Dimensioning 3.1 according to kitchen furnishings and discharge valves 3.2 according to food servings in commercial kitchens 3.3 for meat processing plants, sausage production / cutting plants 431

10 Dimensioning according to EN Separator 3.1 according to kitchen furnishings and discharge valves m Furnishings Quantity n qi [l/s] (n x qi) Simultaneity factor Zi (n) Grey for 1 unit for 2 units for 3 units for 4 units for 5 units water Q s 1 Kettle spout 25 mm... x 1 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 2 Kettle spout 50 mm... x 2 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 3 Tilting kettle outlet 70 mm... x 1 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 4 Tilting kettle outlet 0 mm... x 3 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 5 Sink with odour-seal, 40 mm... x 0,8 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 6 Sink with odour-seal, 50 mm... x 1,5 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 7 Sink without odour-seal, 40 mm... x 2,5 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 8 Sink without odour-seal, 50 mm... x 4 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 9 Dishwasher... x 2 =... l/s x 0.60 x 0.50 x 0.40 x 0.34 x l/s Tilting frying pan... x 1 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 11 Frying pan... x 0,1 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s High pressure/steam cleaning 12 equipment... x 2 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 13 Peeling device... x 1,5 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 14 Vegetable washing device... x 2 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s Tap diameter/threaded connection according to DN ISO DN 15 R ½... x 0,5 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 16 DN 20 R ¾... x 1 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 17 DN 25 R 1... x 1,7 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s Total Q s... l/s Difficulty factor Density (fd) up to 0.94 g/ cm 3 = fd 1,0 more than 0.94 g/cm 3 = fd 1,5 Intake temperature (ft) up to 60 = ft 1,0 over 60 = ft 1,3 Cleaning agents (fr) no = fr 1,0 yes = fr 1,3 fr 1.5 or greater in hospitals Explanation: m = Serial number of the object n = Number of furnishings qi = the maximum grey water outflow in l/s Zi (n) = the factor of concurrency of use NS = NS = Q s x fd x ft x fr Please select the next highest NS! NS = x x x = Selected: NS

11 Separator Dimensioning according to EN according to food servings in commercial kitchens Commercial kitchens M= Meals (number) of monthly average of the daily produced hot food portions VM=company-specific water per hot food serving F= Impact load factor in reference to the operating conditions Hotel kitchen... Meals/daily x 0 l =... x 5 =... l Specialty restaurant... Meals/daily x 50 l =... x 8.5 =... l Canteen / cafeteria... Meals/daily x 5 l =... x 20 =... l Hospitals... Meals/daily x 20 l =... x 13 =... l All-day commercial kitchen... Meals/daily x l =... x 22 =... l Commercial kitchens t= daily operating hours in which the separator is charged with grey water Waste water Q s Hotel kitchen =... Litre... Operating hours x 3600 seconds =... l/s Specialty restaurant =... Litre... Operating hours x 3600 seconds =... l/s Canteen / cafeteria =... Litre... Operating hours x 3600 seconds =... l/s Hospitals =... Litre... Operating hours x 3600 seconds =... l/s All-day commercial kitchen =... Litre... Operating hours x 3600 seconds =... l/s Difficulty factor Density (fd) up to 0.94 g/ cm 3 = fd 1,0 more than 0.94 g/cm 3 = fd 1,5 Intake temperature (ft) up to 60 = ft 1,0 over 60 = ft 1,3 Cleaning agents (fr) no = fr 1,0 yes = fr 1,3 fr 1.5 or greater in hospitals NS = Q s x fd x ft x fr Please select the next highest NS! NS = x x x = Selected: NS

12 Dimensioning according to EN Separator 3.3 Sausage production/cutting operations Sausage production Size of the meat processing plant Small sausage production up to 0 kg daily Medium sausage production 1 to 200 kg daily Large sausage production 201 to 800 kg daily Large animal units, slaughter per week when slaughtering up to 5 cattle or 12.5 pigs each week when slaughtering up to cattle or 25 pigs each week when slaughtering up to 40 cattle or 0 pigs each week M= Sausage production in kg/daily Vp= operational water volume per kg of sausage production... kg / daily x 20 l = kg / daily x 15 l = kg / daily x l =... Size of the meat processing plant Small sausage production up to 0 kg daily Medium sausage production 1 to 200 kg daily Large sausage production 201 to 800 kg daily F= Impact load factor depending on operating conditions x 30 x 35 x 40 t= daily operating hours in which the separator is charged with grey water Waste water Q s... Litre =.. Operating hours x 3600 seconds Q s =... l/s... Litre =.. Operating hours x 3600 seconds Q s =... l/s... Litre =.. Operating hours x 3600 seconds Q s =... l/s Meat cutting operations without meat and sausage production; grey water mainly accumulates during cleaning m Fitting objects Quantity n qi [l/s] (n x qi) Simultaneity factor Zi (n) Grey for 1 unit for 2 units for 3 units for 4 units for > 5 units water Q s 15 DN x 0,5 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 16 DN x 1 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 17 DN x 1,7 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s 12 High pressure/steam cleaning equipment... x 2 =... l/s x 0.45 x 0.31 x 0.25 x 0.21 x l/s Total Q s... l/s Difficulty factor Density (fd) up to 0.94 g/cm 3 = fd 1,0 more than 0.94 g/cm 3 = fd 1,5 Intake temperature (ft) up to 60 = ft 1,0 over 60 = ft 1,3 Cleaning agents (fr) no = fr 1,0 yes = fr 1,3 NS = Q s x fd x ft x fr Please select the next highest NS! NS = x x x = Selected: NS

13 Separator Dimensioning according to EN Content determination of sludge trap Restaurants/ catering facilities; Butchers / meat factories without slaughter, supermarkets, other comparable establishments NS x 0 litres = l Slaughterhouses; Butchers / meat factories with slaughter, other industrial plants with increased sludge NS x 200 litres = l selected content: l 5. Execution of the separator system Separator for Material PE-HD Fittings with direct extraction or with HP interior cleaning manual automatic Control unit Surface mount or Flush Housing: Insulated housing Steel housing other dimensions Replanning: NS or number of meals per day Renovation of existing plant type with waste water lifting plant: delivery head (suction height) geo. m. width DN Length of the disposal pipe: m Number of bends DN 90 /45 Underground installation with cover Load class (A,B,D) Stainless steel (only for free-standing with disposal pump with additional sampling equipment with filling unit Remote control Interior assembly Exterior assembly Pit /assembly area: L x W x H mm Inlet: DN inlet height: mm Frost-free depth mm installation) with inspection window with coarse trap Distance of the control box to the separator m in the building on the property Disposal: Opening L x W mm or diameter mm Stairs / corridor / passage: x W x H mm x B x H mm 6. Comments City, Date Signature Comment: Our recommendations for planning and dimensioning must be generally verified non-binding and by the party responsible for the construction. 435

14

15 Section contents for ground installation Separator Ground installation Page complete disposal Compact design polyethylene (HD-PE) Eco-FPI 438 Eco-FPI with direct suction 440 Ground installation Accessories

16 complete disposal Compact design polyethylene (HD-PE) Separator Ground installation Eco-FPI Product information Ground installation ACO product advantages Load class up to D 400 (corresponds to SLW 60) without customer-side load distribution Low installation costs - separator, sludge trap, sampling in a container Additional heavy duty crane not necessary Buoyancy safety for a groundwater level of up to max 1 m over base plate Easy cleaning due to curved shape plant in accordance with EN 1825 and DIN For ground installation Ordering information Polyethylene base body (double-walled windable pipe) Reinforced concrete cover plate in accordance with DIN For NS 1 4: Ø00/625 x 200 mm For NS 7 : Ø1500/625 x 200 mm With integrated sludge trap Inlet and drainage connections in accordance with EN 877 Manhole cover in accordance with EN 124 Without ventilation opening Reference dimensions: 625 mm Screwed odour-tight System ACO Passavant Official approval Z NS 1 NS 2 NS 3 NS 4 NS 7 NS width Capacity Weight Article No. Sludge trap Grease storage Total capacity B 125 D 400 [l] [l] [l] [kg] DN DN DN DN DN DN DN DN DN DN DN DN

17 Separator Ground installation complete disposal Compact design polyethylene (HD-PE) Ø 600 H 1 ØD T inlet DN... outlet DN... H 2 Ø D 1 Ø D 2 Ground installation inlet DN... outlet DN... Sludge trap H1 H2 D D1 D2 T [l] [mm] [mm] [mm] [mm] [mm] [mm] NS 1 NS 2 NS 3 NS 4 NS 7 NS

18 complete disposal Compact design polyethylene (HD-PE) Separator Ground installation Eco-FPI with direct suction Product information Ground installation ACO product advantages Direct suction enables disposal without odour Load class up to D 400 (corresponds to SLW 60) without customer-side load distribution Low installation costs - separator, sludge trap, sampling in a container Additional heavy duty crane not necessary Buoyancy safety for a groundwater level of up to max 1 m over base plate Easy cleaning due to curved shape plant in accordance with EN 1825 and DIN For ground installation With direct suction DN 80/PN inc. flange/flange connection and Storz coupling 75 B Polyethylene base body (double-walled windable pipe) Reinforced concrete cover plate in accordance with DIN For NS 1 4: Ø00/625 x 200 mm For NS 7 : Ø1500/625 x 200 mm With integrated sludge trap Inlet and drainage connections in accordance with EN 877 Manhole cover in accordance with EN 124 Without ventilation opening Reference dimensions: 625 mm Screwed odour-tight System ACO Passavant Official approval Z Ordering information NS 1 NS 2 NS 3 NS 4 NS 7 NS width Capacity Weight Article No. Sludge trap Grease storage Total capacity B 125 D 400 [l] [l] [l] [kg] DN DN DN DN DN DN DN DN DN DN DN DN

19 Separator Ground installation complete disposal Compact design polyethylene (HD-PE) Ø 600 H 1 ØD T inlet DN... outlet DN... H 2 Ø D 1 Ø D 2 Ground installation inlet DN outlet DN... Sludge trap H1 H2 D D1 D2 T [l] [mm] [mm] [mm] [mm] [mm] [mm] NS 1 NS 2 NS 3 NS 4 NS 7 NS

20 complete disposal Compact design polyethylene (HD-PE) Separator Ground installation Accessories T = Ø620 Ø565 Designation compatible with Description Article No. Sampling shaft DN 0 Eco-FPI for ground installation NS 1 4 Starch separator Eco-STP for ground installation NS Curator/Coalisator GG NS Plastic, material: polyethylene For installation behind the separating plants for ground installation With BEGU cover Clear diameter: 450 mm Load class: D 400 Odour tight Weight: 128 kg Gradient: 33 mm h Gradient: 153 mm Ground installation T = Ø620 Ø565 Sampling shaft DN 150 Eco-FPI for ground installation NS 7 Starch separator Eco-STP for ground installation NS 2 Curator/Coalisator GG NS 6 Plastic, material: polyethylene For installation behind the separating plants for ground installation With BEGU cover Clear diameter: 450 mm Load class: D 400 Odour tight Weight: 128 kg Gradient: 75 mm h Gradient: 159 mm Spannring Verlängerungsstück Dichtung Ø625 Ø865 Ø625 Ø865 Ø625 Ø865 Ø490 Ø434 Ø Extension Supporting ring Supporting ring Supporting ring Sampling shaft Eco-FPI for ground installation Starch separator Eco-STP for ground installation Eco-FPI for ground installation Starch separator Eco-STP for ground installation Eco-FPI for ground installation Starch separator Eco-STP for ground installation Plastic, material: polyethylene For fitting on the protruding sampling shaft for deepened installation Structure height: mm (can be shortened every 45 mm by cutting along the markings) Weight: 11 kg Concrete Diameter: 625 mm Starch 60 mm Without sealing Not displaceable Height: 60 mm without mortar joint 70 mm with mortar joint Weight: 50 kg Concrete Diameter: 625 mm Starch 80 mm Without sealing Not displaceable Height: 80 mm without mortar joint 90 mm with mortar joint Weight: 60 kg Concrete Diameter: 625 mm Starch 0 mm Without sealing Not displaceable Height: 0 mm without mortar joint 1 mm with mortar joint Weight: 70 kg

21 Separator Ground installation complete disposal Compact design polyethylene (HD-PE) Designation compatible with Description Article No. Ø00 Ø1240 Ø00 Ø1240 Ø00 Ø1240 Ø1500 Ø1800 Ø1500 Ø Shaft ring Shaft ring Shaft ring Shaft ring Shaft ring Lattice grating Eco-FPI for ground installation NS 1 4 Starch separator Eco-STP for ground installation NS Eco-FPI for ground installation NS 1 4 Starch separator Eco-STP for ground installation NS Eco-FPI for ground installation NS 1 4 Starch separator Eco-STP for ground installation NS Eco-FPI for ground installation NS 7 Starch separator Eco-STP for ground installation NS 2 Eco-FPI for ground installation NS 7 Starch separator Eco-STP for ground installation NS 2 Eco-FPI NS 1 4 Starch separator Eco-STP NS Concrete in accordance with DIN 4034 part 1 Diameter: 1,000 mm Starch 250 mm With sealing With socket Without spur Height: 250 mm without mortar joint 265 mm with mortar joint Weight: 240 kg Concrete in accordance with DIN 4034 part 1 Diameter: 1,000 mm Starch 500 mm With sealing With socket Without spur Height: 500 mm without mortar joint 515 mm with mortar joint Weight: 500 kg Concrete in accordance with DIN 4034 part 1 Diameter: 1,000 mm Starch 1,000 mm With sealing With socket Without spur Height: 00 mm without mortar joint 15 mm with mortar joint Weight: 00 kg Concrete in accordance with DIN 4034 part 1 Diameter: 1,500 mm Starch 250 mm With sealing With socket Without spur Height: 250 mm without mortar joint 265 mm with mortar joint Weight: 480 kg Concrete in accordance with DIN 4034 part 1 Diameter: 1,500 mm Starch 500 mm With sealing With socket Without spur Height: 500 mm without mortar joint 515 mm with mortar joint Weight: 931 kg For buoyancy safeguard Reinforcement of the base plate Not upgradeable Ground installation Lattice grating Eco-FPI NS 7 Starch separator Eco-STP NS 2 For buoyancy safeguard Reinforcement of the base plate Not upgradeable Ø250 LW Ø Street cap Eco-FPI with direct suction Manhole cover in accordance with EN 124/DIN 1229 Load class: A 15 Cast iron frame and cover Diameter: 300 mm Clear diameter: 250 mm Weight: kg

22 Hinweis: Dies ist eine Infobox-VORLAGE Zubehör AAAAA Seite xxx. Zubehör BBBBB Seite xxx. Infobox

23 Section contents for free-standing installation Separator Page mobile use Polyethylene (LLDPE) Stainless steel (material grade 316) Eco-Mobil Typ 0.3l 446 Eco-Mobil Typ Lipu-Mobil 448 Accessories 449 Eco-Jet-O basic design 450 Oval shape Eco-Jet-OD extension stage Hydrojet-OS extension stage polyethylene (HD-PE) Hydrojet-OSE extension stage 2/disposal pumps 456 Hydrojet-OA extension stage Hydrojet-OAE extension stage 3/disposal pumps 460 Eco-Jet-R basic design 462 complete disposal Curved shape polyethylene (HD-PE) Oval shape stainless steel (material grade 316) Eco-Jet-RD extension stage Hydrojet-RS extension stage Hydrojet-RSE extension stage 2/disposal pumps 468 Hydrojet-RA extension stage Hydrojet-RAE extension stage 3/disposal pumps 472 Accessories 474 Lipurex-O basic design 478 Lipurex-OD extension stage Lipurat-OS extension stage Lipurat-OSE extension stage 2/disposal pumps 484 Lipurat-OA extension stage Lipurat-OAE extension stage 3/disposal pumps 488 Lipurex-R basic design 490 Curved shape stainless steel (material grade 316) Lipurex-RD extension stage Lipurat-RS extension stage Lipurat-RSE extension stage 2/disposal pumps 496 Lipurat-RA extension stage Lipurat-RAE extension stage 3/disposal pumps 500 Accessories 502 Divided shape polyethylene (HD-PE) Eco-Jet-G basic design 506 Eco-Jet-GD extension stage Accessories 508 partial disposal Stainless steel (material grade 304) Lipator manual operation 5 Lipatomat automatic control 512 Accessories 514 system solution Suspension equipment Upstream container mono 516 Upstream container duo 518 Accessories

24 mobile use Polyethylene (LLDPE) Separator Eco-Mobil type 0.3 Product information Area of application: Mobile food stalls Mobile dishwasher Occasional food preparation Application possible only with Connection of 1 commercial dishwasher with a minimum cleaning time of 1 minute, and a changeover time of ½ minute. (cycle time t z = 1½ min.) Water consumption of the commercial dishwasher after rinsing v s = 5 l In addition to the dishwasher, connection of a maximum of 1 pre-wash unit (short-term) Polyethylene, material LLDPE For mobile rinsing devices (no fixed installation) With integrated sludge trap For free-standing installation in frostprotected areas Plug cap Polyethylene Diameter: 350 mm System ACO Passavant Official approval: Z Ordering information maintenance opening Ø 350 moulded-in grip 280 width DN double socket and socket plug DN 50 Capacity Weight Article No. Sludge trap Grease storage Total capacity Empty Full [l] [l] [l] [kg] [kg] DN , inlet DN outlet DN 50 Accessories Designation compatible with Description Article No. 70 Inlet valve DN 50 Eco-Mobil Muli-Mini PVC DN 50 With sealing ring in accordance with DIN Ø50 Ø Rolls frame Eco-Mobil and Lipu-Mobil Stainless steel, material grade 316 With 4 transport casters Weight: 19 kg

25 Separator mobile use Polyethylene (LLDPE) Eco-Mobil type 0.5 Product information Area of application: Mobile food stalls Mobile dishwasher Occasional food preparation Application possible only with Connection of 1 commercial dishwasher with a minimum cleaning time of 1 minute, and a changeover time of ½ minute. (cycle time t z = 1½ min.) Water consumption of the commercial dishwasher after rinsing v s = 5 l In addition to the dishwasher, connection of a maximum of 1 pre-wash unit (short-term) Polyethylene, material LLDPE For mobile rinsing devices (no fixed installation) With integrated sludge trap For free-standing installation in frostprotected areas Plug cap Polyethylene Diameter: 450 mm System ACO Passavant Official Ordering information DN 0 DN 70 Wartungsöffnung DN (Behälter) Zulauf DN... width Capacity Weight Article No. Sludge trap Grease storage Total capacity Empty Full [l] [l] [l] [kg] [kg] DN 70/ Accessories 140 Designation compatible with Description Article No. 15 Inlet valve DN 0 Waste water lifting plants Polyethylene grease separator Polyethylene starch separator PVC Construction length: 176 mm Weight: 2.75 kg Ø120 Ø1 855 Ø Ablauf DN

26 mobile use Stainless steel (material grade 316) Separator Lipu-Mobil Product information Area of application: Mobile food stalls Mobile dishwasher Application possible only with Connection of 1 commercial dishwasher with a minimum cleaning time of 1 minute, and a changeover time of ½ minute. (cycle time tz = 1½ min.) Water consumption of the commercial dishwasher after rinsing v s = 5 l In addition to the dishwasher, connection of a maximum of 1 pre-wash unit (short-term) Stainless steel, material grade 316 For mobile rinsing devices With integrated sludge trap For free-standing installation in frostprotected areas Cover with clamping ring closure Diameter: 350 mm System ACO Passavant Official approval Z Ordering information maintenance opening Ø 300 DN inlet DN outlet DN width Capacity Weight Article No. Sludge trap Grease storage Total capacity Empty Full [l] [l] [l] [kg] [kg] DN

27 Separator mobile use Stainless steel (material grade 316) Accessories Designation compatible with Description Article No Rolls frame Eco-Mobil and Lipu-Mobil Stainless steel, material grade 316 With 4 transport casters Weight: 19 kg

28 complete disposal Oval shape polyethylene (HD-PE) Separator Eco-Jet-O basic design Product information ACO product advantages Proven stability: 25 years (minimum service life) Upgradeable to extension stage 1 3 Minimization of disposal and maintenance costs via economical gradation of the nominal Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN Ausbaustufe: Basisausführung B For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Suction and disposal sump with dewatering socket R 1 Odour-tight maintenance opening, diameter: 450 mm Inlet and drainage connections in accordance with EN 877 System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 450

29 Separator complete disposal Oval shape polyethylene (HD-PE) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Total capacity Empty Full [l] [l] [l] [kg] [kg] NS 1 DN NS 2 DN NS 3 DN NS 4 DN NS 5,5 DN NS 7 DN NS 8,5 DN NS DN ventilation DN 0 min 500 maintenance opening filling device with ball valve and pressure regulator (optional) * sight glass with wiper (optional) * displayed: NS4, operating side right, operating side left would show all components (filling device, sight glass) positioned inlet DN... ØD outlet DN... mirror-inverted to axis. * not included in the scope of delivery H 4 H 1 connection for heating rod (optional) * H 2 H 3 L 1 L 2 B 1 B 2 L1 L2 H1 H2 H3 H4 B1 B2 D [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS 5, NS NS 8, NS

30 complete disposal Oval shape polyethylene (HD-PE) Separator Eco-Jet-OD extension stage 1 Product information ACO product advantages Proven stability: 25 years (minimum service life) Direct emptying without odour build-up Upgradeable to extension stages 2 and 3 Minimization of disposal and maintenance costs via economical gradation of the nominal Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN Ausbaustufe 1 For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1 Odour-tight maintenance opening, diameter: 450 mm Inlet and drainage connections in accordance with EN 877 System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 452

31 Separator complete disposal Oval shape polyethylene (HD-PE) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Total capacity Empty Full [l] [l] [l] [kg] [kg] NS 1 DN NS 2 DN NS 3 DN NS 4 DN NS 5,5 DN NS 7 DN NS 8,5 DN NS DN inlet DN... Ø D ventilation DN 0 min 500 maintenance opening disposal connection with Storz-B-coupling R 2 ½, DIN filling device with solenoid valve and pressure regulator (optional) * sight glass with wiper (optional) * outlet DN... displayed: NS4, operating side right, Operating side left would show all components (filling device, sight glass) positioned mirror-inverted to axis. * not included in the scope of delivery H 4 H 1 connection for heating rod (optional) * H 2 H 5 H 3 L 1 B 1 B 2 L 2 L1 L2 H1 H2 H3 H4 H5 B1 B2 D [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS 5, NS NS 8, NS

32 complete disposal Oval shape polyethylene (HD-PE) Separator Hydrojet-OS extension stage 2 Product information ACO product advantages Proven stability: 25 years (minimum service life) Disposal, cleaning and filling without odour build-up Hydro mechanical high-pressure cleaning - requires only a cold water connection Upgradeable to extension stage 3 Fitting with a disposal pump possible Minimization of disposal and maintenance costs via economical gradation of the nominal Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Ausbaustufe 2 Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1 Inspection window with wiper Manual operation of the high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Odour-tight maintenance opening, diameter: 450 mm Filling unit with ball valve (connection R ¾ ) for manual re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/3.9 kw System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 454

33 Separator complete disposal Oval shape polyethylene (HD-PE) Ordering information width Sludge trap Capacity Weight Article No. Grease storage [l] [l] [l] [kg] [kg] Empty Full Right Left NS 1 DN NS 2 DN NS 3 DN NS 4 DN NS 5,5 DN NS 7 DN NS 8,5 DN NS DN inlet DN... Ø D ventilation DN 0 min 500 maintenance opening high-pressure spray head filling device with solenoid valve and pressure regulator sight glass with wiper outlet DN... displayed: NS4, operating side right, operating side left would show all components (disposal connection, filling device, sight glass) positioned mirror-inverted to axis. * not included in the scope of delivery H 4 H 1 high-pressure pump L 4 L 3 L 1 H 2 connection for heating rod (optional) * H 3 H 5 disposal connection with Storz-B-coupling R 2 ½, DIN L 2 B 1 B 2 Total capacity L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 D [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS 5, NS NS 8, NS

34 complete disposal Oval shape polyethylene (HD-PE) Separator Hydrojet-OSE extension stage 2 Product information ACO product advantages Proven stability: 25 years (minimum service life) Disposal, cleaning and filling without odour build-up Hydro mechanical high-pressure cleaning - requires only a cold water connection Upgradeable to extension stage 3 Minimization of disposal and maintenance costs via economical gradation of the nominal Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Ausbaustufe 2 Suction and disposal sump with dewatering socket R 1 Inspection window with wiper Manual operation of the high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Standard control with centralised fault signal Disposal pump with free flow impeller Motor rating: 3.0 kw/2850 U/min Delivery performance: 20 m³/h with 1 bar medium delivery head Stop valve in front of disposal pump Odour-tight maintenance opening, diameter: 450 mm Filling unit with ball valve (connection R ¾ ) for manual re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/6.9 kw System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation With disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 456

35 Separator complete disposal Oval shape polyethylene (HD-PE) Ordering information width Sludge trap Capacity Weight Article No. Grease storage [l] [l] [l] [kg] [kg] Empty Full Right Left NS 1 DN NS 2 DN NS 3 DN NS 4 DN NS 5,5 DN NS 7 DN NS 8,5 DN NS DN inlet DN... Ø D ventilation DN 0 min 500 maintenance opening high-pressure spray head filling device with solenoid valve and pressure regulator sight glass with wiper outlet DN... displayed: NS4, operating side right, operating side left would show all components (disposal connection, filling device, sight glass, shut-off valve, switch box) positioned mirror-inverted to axis. * not included in the scope of delivery H 4 H 1 high-pressure pump disposal pump switch box Shut-off valve L 4 disposal connection with Storz-B-coupling R 2 ½, DIN L 3 L 1 L 2 H 2 connection for heating rod (optional) * H 3 B 4 B 1 B 2 H 5 B 3 Total capacity L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 B3 B4 D [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS 5, NS NS 8, NS

36 complete disposal Oval shape polyethylene (HD-PE) Separator Hydrojet-OA extension stage 3 Product information ACO product advantages Proven stability: 25 years (minimum service life) Disposal, cleaning and filling without odour build-up Upgrade with disposal pump possible Pre- and post- cleaning times can be set individually Hydro mechanical high-pressure cleaning - requires only a cold water connection Fitting with a disposal pump possible Minimization of disposal and maintenance costs via economical gradation of the nominal Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Ausbaustufe 3 Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1 Inspection window with wiper Automatic high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Standard control with centralised fault signal Odour-tight maintenance opening, diameter: 450 mm Filling unit with solenoid valve (connection R ¾ ) for automatic re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/3.9 kw System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation No odour build-up 458

37 Separator complete disposal Oval shape polyethylene (HD-PE) Ordering information width Sludge trap Capacity Weight Article No. Grease storage [l] [l] [l] [kg] [kg] Empty Full Right Left NS 1 DN NS 2 DN NS 3 DN NS 4 DN NS 5,5 DN NS 7 DN NS 8,5 DN NS DN inlet DN... Ø D ventilation DN 0 min 500 maintenance opening high-pressure spray head filling device with solenoid valve and pressure regulator sight glass with wiper outlet DN... displayed: NS4, operating side right, operating side left would show all componen (disposal connection, filling device, sight glass, switch box) positioned mirror-inverted to axis. * not included in the scope of delivery H 4 H 1 switch box high-pressure pump L 4 L 3 L 1 connection for heating rod (optional) * H 2 H 5 H 3 disposal connection with Storz-B-coupling R 2 ½, DIN L 2 B 3 B 1 B 2 Total capacity L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 B3 D [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS 5, NS NS 8, NS

38 complete disposal Oval shape polyethylene (HD-PE) Separator Hydrojet-OAE extension stage 3 Product information ACO product advantages Proven stability: 25 years (minimum service life) Disposal, cleaning and filling without odour build-up Pre- and post- cleaning times can be set individually Hydro mechanical high-pressure cleaning - requires only a cold water connection Minimization of disposal and maintenance costs via economical gradation of the nominal Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Ausbaustufe 3 Suction and disposal sump with dewatering socket R 1 Inspection window with wiper Automatic high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Standard control with centralised fault signal Disposal pump with free flow impeller Motor rating: 3.0 kw/2850 U/min Delivery performance: 20 m³/h with 1 bar medium delivery head Stop valve in front of disposal pump Odour-tight maintenance opening, diameter: 450 mm Filling unit with solenoid valve (connection R ¾ ) for automatic re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/6.9 kw System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation With disposal pump and remote control available No odour build-up 460

39 Separator complete disposal Oval shape polyethylene (HD-PE) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Total capacity [l] [l] [l] [kg] [kg] Empty Full Right Left NS 1 DN NS 2 DN NS 3 DN NS 4 DN NS 5,5 DN NS 7 DN NS 8,5 DN NS DN inlet DN... Ø D ventilation DN0 min 500 maintenance opening high-pressure spray head filling device with solenoid valve and pressure regulator sight glass with wiper outlet DN... displayed: NS4, operating side right operating side left would show all components (disposal connection, filling device, sight glass, shut-off valve, switch box) positioned mirror-inverted to axis. * not included in the scope of delivery H 4 H 1 high-pressure pump disposal pump switch box shut-off valve L 4 L 3 L 1 H 2 connection for heating rod (optional) * H 5 H 3 disposal connection with Storz-Bcoupling R 2 ½, DIN L 2 B 4 B 1 B 2 B 3 L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 B3 B4 D [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS 5, NS NS 8, NS

40 complete disposal Oval shape polyethylene (HD-PE) Separator Eco-Jet-R basic design Product information ACO product advantages Easy to transport and install via single component installation Upgradeable to extension stage 1 3 Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Suction and disposal sump with dewatering socket R 1½ Odour-tight maintenance opening, diameter: 350 mm Inlet and drainage connections in accordance with EN 877 System ACO Passavant Official approval Z Ausbaustufe: Basisausführung B Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 462

41 Separator complete disposal Oval shape polyethylene (HD-PE) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Total capacity Empty Full [l] [l] [l] [kg] [kg] NS 2 DN NS 4 DN NS 7 DN NS DN NS 15 DN NS 20 DN inlet DN... Ø D min 500 maintenance opening ventilation DN 0 filling device with ball valve and pressure regulator (optional) * sight glass with wiper (optional) * outlet DN... displayed: NS7, operating side right, operating side left would show all components (sight glass) positioned mirror-inverted to axis. * not included in the scope of delivery H 3 H 1 connection for heating rod (optional) * H 2 H 4 Ø D 1 L 1 L 3 Z L 2 L1 L2 H1 H2 H3 H4 D D1 Z/n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS /2 NS /2 NS /3 NS /3 NS /3 NS /3 463

42 complete disposal Oval shape polyethylene (HD-PE) Separator Eco-Jet-RD extension stage 1 Product information ACO product advantages Easy to transport and install via single component installation Direct emptying without odour build-up Upgradeable to extension stages 2 and 3 Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1½ Odour-tight maintenance opening, diameter: 350 mm Inlet and drainage connections in accordance with EN 877 System ACO Passavant Official approval Z Ausbaustufe 1 Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 464

43 Separator complete disposal Oval shape polyethylene (HD-PE) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Empty Full [l] [l] [l] [kg] [kg] NS 2 DN NS 4 DN NS 7 DN NS DN NS 15 DN NS 20 DN inlet DN... min 500 Ø D disposal connection with Storz-Bcoupling R 2 ½, DIN maintenance opening ventilation DN 0 filling device with ball valve and pressure regulator (optional) * sight glass with wiper (optional) * outlet DN... displayed: NS7, operating side right operating side left would show all componen (disposal connection, sight glass) positioned mirror-inverted to axis *not included in the scope of delivery H 3 H 1 Ø D 1 L 1 connection for heating rod (optional) * L 3 Z H 2 H 4 H 5 L 2 Total capacity L1 L2 L3 H1 H2 H3 H4 H5 D D1 Z/n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS /2 NS /2 NS /3 NS /3 NS /3 NS /3 465

44 complete disposal Oval shape polyethylene (HD-PE) Separator Hydrojet-RS extension stage 2 Product information ACO product advantages Easy to transport and install via single component installation Disposal, cleaning and filling without odour build-up Hydro mechanical high-pressure cleaning - requires only a cold water connection Upgradeable to extension stage 3 Fitting with a disposal pump possible Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1½ Inspection window with wiper Manual operation of the high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Odour-tight maintenance opening, diameter: 350 mm Filling unit with ball valve (connection R ¾ ) for manual re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/3.9 kw System ACO Passavant Official approval Z Ausbaustufe 2 Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 466

45 Separator complete disposal Oval shape polyethylene (HD-PE) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Total capacity [l] [l] [l] [kg] [kg] Empty Full Right Left NS 2 DN NS 4 DN NS 7 DN NS DN NS 15 DN NS 20 DN disposal connection with Storz-Bcoupling R 2 ½, DIN inlet DN... Ø D min 500 high-pressure spray head maintenance opening ventilation DN 0 sight glass with wipe filling device with ball valve and pressure regulator outlet DN... displayed: NS7, operating side right operating side left would show all componen (disposal connection, sight glass, highpressure pump) positioned mirror-inverted to axis. * not included in the scope of delivery H 3 H 1 Ø D 1 L 1 connection for heating rod (optional) * L 3 Z H 2 H 4 H 5 L 2 L 4 high-pressure pump L1 L2 L3 L4 H1 H2 H3 H4 H5 D D1 Z/n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS /2 NS /2 NS /3 NS /3 NS /3 NS /3 467

46 complete disposal Oval shape polyethylene (HD-PE) Separator Hydrojet-RSE extension stage 2 Product information ACO product advantages Easy to transport and install via single component installation Disposal, cleaning and filling without odour build-up Hydro mechanical high-pressure cleaning - requires only a cold water connection Upgradeable to extension stage 3 Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1½ Inspection window with wiper Manual operation of the high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Standard control with centralised fault signal Disposal pump with free flow impeller Motor rating: 3.0 kw/2850 U/min Delivery performance: 20 m³/h with 1 bar medium delivery head Stop valve in front of disposal pump Odour-tight maintenance opening, diameter: 350 mm Filling unit with ball valve (connection R ¾ ) for manual re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/6.9 kw System ACO Passavant Official approval Z Ausbaustufe 2 Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation With disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 468

47 Separator complete disposal Oval shape polyethylene (HD-PE) Ordering information width Sludge trap Capacity Weight Article No. Grease storage [l] [l] [l] [kg] [kg] Empty Full Right Left NS 2 DN NS 4 DN NS 7 DN NS DN NS 15 DN NS 20 DN inlet DN... min 500 high-pressure spray head maintenance opening filling device with ball valve and pressure regulator ventilation DN 0 disposal connection with Storz-Bcoupling R 2 ½, DIN Outlet DN... displayed: NS7, operating side right, operating side left would show all component (disposal connection, switch box, sight glass, high-pressure pump) positioned mirror-inverted to axis. Ø D switch box sight glass with wipe * not included in the scope of delivery H 3 H 1 Z connection for heating rod (optional) * stop valve Ø D 1 L 3 L 4 L 1 disposal pump H 2 H 4 H 5 L 5 L 2 L 6 high-pressure pump Total capacity L1 L2 L3 L4 L5 L6 H1 H2 H3 H4 H5 D D1 Z/n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS /2 NS /2 NS /3 NS /3 NS /3 NS /3 469

48 complete disposal Oval shape polyethylene (HD-PE) Separator Hydrojet-RA extension stage 3 Product information ACO product advantages Easy to transport and install via single component installation Disposal, cleaning and filling without odour build-up Pre- and post- cleaning times can be set individually Hydro mechanical high-pressure cleaning - requires only a cold water connection Fitting with a disposal pump possible Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1½ Inspection window with wiper Automatic high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Standard control with centralised fault signal Odour-tight maintenance opening, diameter: 350 mm Filling unit with solenoid valve (connection R ¾ ) for automatic re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/3.9 kw System ACO Passavant Official approval Z Ausbaustufe 3 Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation No odour build-up 470

49 Separator complete disposal Oval shape polyethylene (HD-PE) Ordering information width Sludge trap Capacity Weight Article No. Grease storage [l] [l] [l] [kg] [kg] Empty Full Right Left NS 2 DN NS 4 DN NS 7 DN NS DN NS 15 DN NS 20 DN inlet DN... min 500 Ø D high-pressure spray head maintenance opening switch box disposal connection with Storz-Bcoupling R 2 ½, DIN ventilation DN 0 filling device with solenoid valve and pressure regulator sight glass with wipe outlet DN... displayed: NS7, operating side right operating side left would show all components (disposal connection, switch box, sight glass, high-pressure pump) positioned mirror-inverted to axis. * not included in the scope of delivery H 3 H 1 Ø D 1 L 1 connection for heating rod (optional) L 3 Z H 2 H 4 H 5 L 4 L 2 L 5 high-pressure pump Total capacity L1 L2 L3 L4 L5 H1 H2 H3 H4 H5 D D1 Z/n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS /2 NS /2 NS /3 NS /3 NS /3 NS /3 471

50 complete disposal Oval shape polyethylene (HD-PE) Separator Hydrojet-RAE extension stage 3 Product information ACO product advantages Easy to transport and install via single component installation Disposal, cleaning and filling without odour build-up Pre- and post- cleaning times can be set individually Hydro mechanical high-pressure cleaning - requires only a cold water connection Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1½ Ausbaustufe 3 Inspection window with wiper Automatic high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Standard control with centralised fault signal Disposal pump with free flow impeller Motor rating: 3.0 kw/2850 U/min Delivery performance: 20 m³/h with 1 bar medium delivery head Stop valve in front of disposal pump Odour-tight maintenance opening, diameter: 350 mm Filling unit with solenoid valve (connection R ¾ ) for automatic re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/6.9 kw System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation With disposal pump and remote control available No odour build-up 472

51 Separator complete disposal Oval shape polyethylene (HD-PE) Ordering information width Sludge trap Capacity Weight Article No. Grease storage [l] [l] [l] [kg] [kg] Empty Full Right Left NS 2 DN NS 4 DN NS 7 DN NS DN NS 15 DN NS 20 DN inlet DN... min 500 Ø D high-pressure spray head maintenance opening switch box filling device with solenoid valve and pressure regulator ventilation DN 0 sight glass with wiper disposal connection with Storz-B-coupling R 2½, DIN outlet DN... displayed: NS7, operating side right operating side left would show all components (disposal connection, switch box, sight glass, high-pressure pump) positioned mirror-inverted to axis. * not included in the scope of delivery H 3 H 1 Z Ø D 1 L1 connection for heating rod (optional) L 3 stop valve disposal pump L 4 H 2 H 4 H 5 L 5 L 2 L 6 high-pressure pump Total capacity L1 L2 L3 L4 L5 L6 H1 H2 H3 H4 H5 D D1 Z/n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS /2 NS /2 NS /3 NS /3 NS /3 NS /3 473

52 complete disposal Oval shape polyethylene (HD-PE) Separator Accessories Designation compatible with Description Article No li. Ø Sampling pot DN 0 Eco-Jet/ Hydrojet NS 1 4 Starch separator Fapurat-PE NS For installation in horizontal pipes DN 0 after the separator plant Curved shape, with Socket seal (material SBR) on the inlet and pipe spigot on the drain Odour tight maintenance opening DN 450 Weight: 7 kg li. Ø Sampling pot DN 150 Eco-Jet/ Hydrojet NS 5.5 Starch separator Fapurat-PE NS 2 For installation in horizontal pipes DN 150 after the separator plant Curved shape, with Socket seal (material SBR) on the inlet and pipe spigot on the drain Odour tight maintenance opening DN 450 Weight: 7 kg li. Ø li. Ø Sampling pot DN 200 Sampling pot DN 0 Eco-Jet/ Hydrojet NS Eco-Jet/ Hydrojet NS 1 4 Starch separator Fapurat-PE NS For installation in horizontal pipes DN 200 after the separator plant Curved shape, with Socket seal (material SBR) on the inlet and pipe spigot on the drain Odour tight maintenance opening DN 450 Weight: 7 kg For installation in vertical pipes DN 0 after the separator plant Curved shape, with Socket seal (material SBR) on the inlet and pipe spigot on the drain Odour tight maintenance opening DN 450 Weight: 7 kg li. Ø Sampling pot DN 150 Eco-Jet/ Hydrojet NS 5.5 Starch separator Fapurat-PE NS 2 For installation in vertical pipes DN 150 after the separator plant Curved shape, with Socket seal (material SBR) on the inlet and pipe spigot on the drain Odour tight maintenance opening DN 450 Weight: 7 kg li. Ø Sampling pot DN 200 Eco-Jet/ Hydrojet NS For installation in vertical pipes DN 200 after the separator plant Curved shape, with Socket seal (material SBR) on the inlet and pipe spigot on the drain Odour tight maintenance opening DN 450 Weight: 7 kg

53 Separator complete disposal Oval shape polyethylene (HD-PE) Designation compatible with Description Article No. Inspection window Eco-Jet-O, -OD, -R, -RD width: DN 200 With screen wiper Weight: 5 kg ca.400 R 3/4 Ø76 ca.350 Filling unit Eco-Jet-O, -OD, -R, -RD Free outlet in accordance with DIN 1988 part 4 For connection to the drinking water supply With ball valve R ¾ With pressure reducer Weight: 3.5 kg x x li. Ø li. Ø Remote control Remote control Coarse trap DN 0 Coarse trap DN 150 Lipurat/ Hydrojet-OA/RA Lipurat/ Hydrojet-OAE/RAE Starch separator Fapurat-OAE Eco-Jet/ Hydrojet NS 1 4 Starch separator Fapurat-PE NS Eco-Jet/ Hydrojet NS 5.5 Starch separator Fapurat-PE NS 2 For interior fitting or installation in connection box Control conduit without customer-side grounding conductor Up to 50 m: 7 x 1.0 mm² m: 7 x 1.5 mm² Protection category IP 54 Weight: 1 kg For interior fitting or installation in connection box Control conduit without customer-side grounding conductor Up to 50 m: 7 x 1.0 mm² 50 m 200 m: 7 x 1.5 mm² Protection category IP 54 Weight: 1 kg For installation in horizontal pipes DN 0 in front of the separator plants Curved shape, with Socket seal (material SBR) on the inlet and pipe spigot on the drain Stainless steel cage, material grade 316 for retention of coarse materials Odour tight maintenance opening DN 450 Weight: 14 kg For installation in horizontal pipes DN 150 in front of the separator plants Curved shape, with Socket seal (material SBR) on the inlet and pipe spigot on the drain Stainless steel cage, material grade 316 for retention of coarse materials Odour tight maintenance opening DN 450 Weight: 14 kg

54 complete disposal Oval shape polyethylene (HD-PE) Separator li. Ø Bohrung Ø40 Designation compatible with Description Article No. Coarse trap DN 200 Eco-Jet/ Hydrojet NS For installation in horizontal pipes DN 200 in front of the separator plants Curved shape, with Socket seal (material SBR) on the inlet and pipe spigot on the drain Stainless steel cage, material grade 316 for retention of coarse materials Odour tight maintenance opening DN 450 Weight: 14 kg Connection box Starch separator For disposal connection and remote control Stainless steel, material grade 304 Fitting: refinements (width x height x depth) 500 x 500 x 160 mm Entsorgungsanschluss Fernbedienung Lüftungsanschluss Entsorgungsanschluss Bohrung Ø Flush-mounted frame Connection box Connection box Eco-FPI with direct suction Eco-Jet OD/RD/GD Lipurex OD/RD Hydrojet OS/OSE/RS/RSE Lipurat OS/OSE/RS/RSE (width x height x depth) 565 x 565 x 15 mm For disposal connection DN 80 Stainless steel, material grade 304 Design refinements Door stop Right or left Door is lockable (width x height x depth) 370 x 330 x 250 mm Weight: 8 kg Flush-mounted frame Connection box Stainless steel, material grade 304 (width x height x depth) 421 x 381 x 25 mm

55 Separator complete disposal Oval shape polyethylene (HD-PE) ØR Designation compatible with Description Article No. Stop valve for freestanding installation Starch separator for free-standing installation Cast iron Valve plate, stainless steel spindle, material grade 304 H1 H2 DN 0 Length (L): 50 mm Shaft travel (H1 H2): mm Diameter hand wheel: 200 mm DN 150 Length (L): 60 mm Shaft travel (H1 H2): mm Diameter hand wheel: 200 mm L Flange connection Stop valve DN 200 Length (L): 60 mm Shaft travel (H1 H2): mm Diameter hand wheel: 250 mm Stainless steel, material grade 304 Sealing: NBR Ø 1 DN 0 Length (L): 75 mm L DN 150 Length (L): 75 mm Ø120 Ø1 140 Ø Inlet valve DN 0 Waste water lifting plants Polyethylene grease separator Polyethylene starch separator DN 200 Length (L): 120 mm PVC Construction length: 176 mm Weight: 2.75 kg Inlet valve DN 150 Waste water lifting plants Polyethylene grease separator Polyethylene starch separator PVC Construction length: 226 mm Weight: 6.5 kg Ø174 Ø160 Ø R 1 1/2 Heating rod For homogenization of the grease layer Inc. control Electrical connection 400 V/50 Hz/16 A/6.0 kw

56 complete disposal Oval shape stainless steel (material grade 316) Separator Lipurex-O basic design Product information ACO product advantages Proven stability: 25 years (minimum service life) Upgradeable to extension stage 1 3 Minimization of disposal and maintenance costs via economical gradation of the nominal Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Suction and disposal sump with dewatering socket R 1½ Odour-tight maintenance opening Diameter: 300 mm at NS 1 4 Diameter: 500 mm at NS 5.5 Inlet and drainage connections in accordance with EN 877 System ACO Passavant Official approval Z Ausbaustufe: Basisausführung B Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 478

57 Separator complete disposal Oval shape stainless steel (material grade 316) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Total capacity Empty Full [l] [l] [l] [kg] [kg] NS 1 DN NS 2 DN NS 3 DN NS 4 DN NS 5,5 DN NS 7 DN NS 8,5 DN NS DN filling device with solenoid valve and pressure regulator (optional) * H 1 inlet DN... Ø D min 500 maintenance opening L 3 L 1 ventilation DN 0 sight glass with wiper (optional) * connection for heating rod (optional) * outlet DN... H 2 H 3 H 4 displayed: NS4, operating side right o perating side left would show all components (sight glass) positioned mirror-inverted to axis. * not included in the scope of delivery L 2 B 1 B 2 L1 L2 L3 H1 H2 H3 H4 B1 B2 D [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS 5, NS NS 8, NS

58 complete disposal Oval shape stainless steel (material grade 316) Separator Lipurex-OD extension stage 1 Product information ACO product advantages Proven stability: 25 years (minimum service life) Direct emptying without odour build-up Upgradeable to extension stages 2 and 3 Minimization of disposal and maintenance costs via economical gradation of the nominal Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1½ Odour-tight maintenance opening Diameter: 300 mm at NS 1 4 Diameter: 500 mm at NS 5.5 Inlet and drainage connections in accordance with EN 877 System ACO Passavant Official approval Z Ausbaustufe 1 Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 480

59 Separator complete disposal Oval shape stainless steel (material grade 316) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Empty Full [l] [l] [l] [kg] [kg] NS 1 DN NS 2 DN NS 3 DN NS 4 DN NS 5,5 DN NS 7 DN NS 8,5 DN NS DN filling device with solenoid valve and pressure regulator (optional) * min 500 disposal connection with Storz-coupling R2 ½, DIN maintenance opening ventilation DN0 displayed: NS4, operating side right operating side left would show all components (disposal connection, sight glass) positioned mirror-inverted to axis. H 4 H 1 inlet DN... Ø D L 3 L 1 sight glass with wiper (optional) * connection for heating rod (optional) * outlet DN... H 2 H 3 H 5 * not included in the scope of delivery L 2 B 1 B 2 Total capacity L1 L2 L3 H1 H2 H3 H4 H5 B1 B2 D [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS 5, NS NS 8, NS

60 complete disposal Oval shape stainless steel (material grade 316) Separator Lipurat-OS extension stage 2 Product information ACO product advantages Proven stability: 25 years (minimum service life) Disposal, cleaning and filling without odour build-up Hydro mechanical high-pressure cleaning - requires only a cold water connection Upgradeable to extension stage 3 Fitting with a disposal pump possible Minimization of disposal and maintenance costs via economical gradation of the nominal Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1 Inspection window with wiper Manual operation of the high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Odour-tight maintenance opening Diameter: 300 mm at NS 1 4 Diameter: 500 mm at NS 5.5 Filling unit with ball valve (connection R ¾ ) for manual re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/3.9 kw System ACO Passavant Official approval Z Ausbaustufe 2 Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 482

61 Separator complete disposal Oval shape stainless steel (material grade 316) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Total capacity [l] [l] [l] [kg] [kg] Empty Full Right Left NS 1 DN NS 2 DN NS 3 DN NS 4 DN NS 5,5 DN NS 7 DN NS 8,5 DN NS DN disposal connection with Storz-Bcoupling R 2 ½,DIN Inlet DN... maintenance opening high-pressure spray head ventilation DN 0 min 500 filling device with solenoid valve and pressure regulator outlet DN... displayed: NS4, operating side right operating side left would show all compone (disposal connection, sight glass) positione mirror-inverted to axis. * not included in the scope of delivery H 4 H 1 Ø D L 4 L 1 L 3 sight glass with wiper connection for heating rod (optional) * highpressure pump H 2 H 3 H 5 L 2 B 1 B 2 L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 D [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS 5, NS NS 8, NS

62 complete disposal Oval shape stainless steel (material grade 316) Separator Lipurat-OSE extension stage 2 Product information ACO product advantages Proven stability: 25 years (minimum service life) Disposal, cleaning and filling without odour build-up Hydro mechanical high-pressure cleaning - requires only a cold water connection Upgradeable to extension stage 3 Minimization of disposal and maintenance costs via economical gradation of the nominal Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1½ Ausbaustufe 2 Inspection window with wiper Manual operation of the high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Standard control with centralised fault signal Disposal pump with free flow impeller Motor rating: 3.0 kw/2850 U/min Delivery performance: 20 m³/h with 1 bar medium delivery head Stop valve in front of disposal pump Odour-tight maintenance opening Diameter: 300 mm at NS 1 4 Diameter: 500 mm at NS 5.5 Filling unit with ball valve (connection R ¾ ) for manual re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/6.9 kw System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation With disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 484

63 Separator complete disposal Oval shape stainless steel (material grade 316) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Total capacity [l] [l] [l] [kg] [kg] Empty Full Right Left NS 1 DN NS 2 DN NS 3 DN NS 4 DN NS 5,5 DN NS 7 DN NS 8,5 DN NS DN disposal connection with Storz-B-coupling R 2 ½, DIN Inlet DN... maintenance opening high-pressure spray head ventilation DN 0 min 500 filling device with solenoid valve and pressure regulator outlet DN... displayed: NS4, operating side right operating side left would show all components (disposal connection, filling device, sight glass) positioned mirror-inverted to axis. * not included in the scope of delivery H 4 H 1 stop valve disposal pump L 4 L 1 L 3 L 2 B 4 B 1 B 2 B 3 Ø D switch box sight glass with wiper connection for heating rod (optional) * highpressure pump H 2 H 3 H 5 L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 B3 B4 D [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS 5, NS NS 8, NS

64 complete disposal Oval shape stainless steel (material grade 316) Separator Lipurat-OA extension stage 3 Product information ACO product advantages Proven stability: 25 years (minimum service life) Disposal, cleaning and filling without odour build-up Pre- and post- cleaning times can be set individually Hydro mechanical high-pressure cleaning - requires only a cold water connection Fitting with a disposal pump possible Minimization of disposal and maintenance costs via economical gradation of the nominal Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Ausbaustufe 3 Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1½ Inspection window with wiper Automatic high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Standard control with centralised fault signal Odour-tight maintenance opening Diameter: 300 mm at NS 1 4 Diameter: 500 mm at NS 5.5 Filling unit with solenoid valve (connection R ¾ ) for automatic re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/3.9 kw System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation No odour build-up 486

65 Separator complete disposal Oval shape stainless steel (material grade 316) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Total capacity [l] [l] [l] [kg] [kg] Empty Full Right Left NS 1 DN NS 2 DN NS 3 DN NS 4 DN NS 5,5 DN NS 7 DN NS 8,5 DN NS DN disposal connection with Storz-B-coupling R 2 ½, DIN inlet DN... maintenance opening high-pressure spray head ventilation DN 0 min 500 filling device with solenoid valve and pressure regulator outlet DN... displayed: NS4, operating side right, operating side left would show all components (disposal connection, filling device, sight glass) positioned mirror-inverted to axis. * not included in the scope of delivery H 4 H 1 Ø1 switch box L 4 L 1 L 3 sight glass with wiper connection for heating rod (optional) * highpressure pump H 2 H 3 H 5 L 2 B 3 B 4 B 1 B 2 L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 B3 B4 D [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS 5, NS NS 8, NS

66 complete disposal Oval shape stainless steel (material grade 316) Separator Lipurat-OAE extension stage 3 Product information ACO product advantages Proven stability: 25 years (minimum service life) Disposal, cleaning and filling without odour build-up Pre- and post- cleaning times can be set individually Hydro mechanical high-pressure cleaning - requires only a cold water connection Minimization of disposal and maintenance costs via economical gradation of the nominal Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Ausbaustufe 3 Suction and disposal sump with dewatering socket R 1½ Inspection window with wiper Automatic high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Standard control with centralised fault signal Disposal pump with free flow impeller Motor rating: 3.0 kw/2850 U/min Delivery performance: 20 m³/h with 1 bar medium delivery head Stop valve in front of disposal pump Odour-tight maintenance opening Diameter: 300 mm at NS 1 4 Diameter: 500 mm at NS 5.5 Filling unit with solenoid valve (connection R ¾ ) for automatic re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/6.9 kw System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation With disposal pump and remote control available No odour build-up 488

67 Separator complete disposal Oval shape stainless steel (material grade 316) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Total capacity [l] [l] [l] [kg] [kg] Empty Full Right Left NS 1 DN NS 2 DN NS 3 DN NS 4 DN NS 5,5 DN NS 7 DN NS 8,5 DN NS DN disposal connection with Storz-B- coupling R 2 ½, DIN inlet DN... maintenance opening high-pressure spray head ventilation DN 0 min 500 filling device with solenoid valve and pressure regulator outlet DN... displayed: NS4, operating side right operating side left would show all components (disposal connection, filling device, sight glass) positioned mirror-inverted to axis. * not included in the scope of delivery H 4 H 1 stop valve disposal pump Ø D switch box L 4 L 1 L 3 sight glass with wiper connection for heating rod (optional) * highpressure pump H 2 H 5 L 2 B 4 B 1 B 2 B 3 H 3 L1 L2 L3 L4 H1 H2 H3 H4 H5 B1 B2 B3 B4 D [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS 5, NS NS 8, NS

68 complete disposal Curved shape stainless steel (material grade 316) Separator Lipurex-R basic design Product information ACO product advantages Easy to transport and install via single component installation Upgradeable to extension stage 1 3 Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Suction and disposal sump with dewatering socket R 1½ Odour-tight maintenance opening Diameter: 300 mm at NS 1 4 Diameter: 500 mm at NS 7 20 Inlet and drainage connections in accordance with EN 877 System ACO Passavant Official approval Z Ausbaustufe: Basisausführung B Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 490

69 Separator complete disposal Curved shape stainless steel (material grade 316) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Total capacity Empty Full [l] [l] [l] [kg] [kg] NS 2 DN NS 4 DN NS 7 DN NS DN NS 15 DN NS 20 DN inlet DN... min 500 Ø D maintenance opening ventilation DN 0 filling device with ball valve and pressure regulator (optional) * sight glass with wiper (optional) * outlet DN... displayed: NS 7, operating side rights, operating side left would show all components (sight glass) positioned mirror-inverted to axis. * not included in the scope of delivery H 3 H 1 connection for heating rod (optional) H 2 H 4 Ø D 1 L 1 L 3 Z L 2 L1 L2 L3 H1 H2 H3 H4 D D1 Z/n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS /2 NS /2 NS /3 NS /3 NS /3 NS /3 491

70 complete disposal Curved shape stainless steel (material grade 316) Separator Lipurex-RD extension stage 1 Product information ACO product advantages Easy to transport and install via single component installation Direct emptying without odour build-up Upgradeable to extension stages 2 and 3 Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1½ Odour-tight maintenance opening Diameter: 300 mm at NS 1 4 Diameter: 500 mm at NS 7 20 Inlet and drainage connections in accordance with EN 877 System ACO Passavant Official approval Z Ausbaustufe 1 Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 492

71 Separator complete disposal Curved shape stainless steel (material grade 316) Ordering information width Sludge trap Capacity Weight Article No. Grease storage Empty Full [l] [l] [l] [kg] [kg] NS 2 DN NS 4 DN NS 7 DN NS DN NS 15 DN NS 20 DN inlet DN... min 500 Ø D disposal connection with Storz-B-coupling R 2 ½ DIN filling device with ball valve and pressure regulator (optional) * maintenance opening ventilation DN 0 sight glass with wiper (optional) * outlet DN... displayed: NS7, operating side right operating side left would show all componen (disposal connection, sight glass) positioned mirror-inverted to axis. * not included in the scope of delivery H 3 H 1 Ø D 1 L 1 connection for heating rod (optional) L 3 Z H 2 L 2 H 4 H 5 Total capacity L1 L2 L3 H1 H2 H3 H4 H5 D D1 Z/n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS /2 NS /2 NS /3 NS /3 NS /3 NS /3 493

72 complete disposal Curved shape stainless steel (material grade 316) Separator Lipurat-RS extension stage 2 Product information ACO product advantages Easy to transport and install via single component installation Disposal, cleaning and filling without odour build-up Hydro mechanical high-pressure cleaning - requires only a cold water connection Upgradeable to extension stage 3 Fitting with a disposal pump possible Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For installation in rooms With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Ausbaustufe 2 Suction and disposal sump with dewatering socket R 1½ Inspection window with wiper Manual operation of the high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Odour-tight maintenance opening Diameter: 300 mm at NS 1 4 Diameter: 500 mm at NS 7 20 Filling unit with ball valve (connection R ¾ ) for manual re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/3.9 kw System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 494

73 Separator complete disposal Curved shape stainless steel (material grade 316) Ordering information width Sludge trap Capacity Weight Article No. Grease storage [l] [l] [l] [kg] [kg] Empty Full Right Left NS 2 DN NS 4 DN NS 7 DN NS DN NS 15 DN NS 20 DN disposal connection with Storz-B-coupling R 2½ DIN high-pressure spray head filling device with ball valve and pressure regulator inlet DN... min 500 maintenance opening ventilation DN 0 outlet DN... displayed: NS7, operating side right operating side left would show all componen (disposal connection, sight glass, high pressure pump) positioned mirror-inverted to axis. Ø D sight glass with wiper * not included in the scope of delivery H 3 H 1 Ø D 1 L 1 connection for heating rod (optional)* L 3 Z H 2 H 4 H 5 L 2 L 4 high-pressure pump Total capacity L1 L2 L3 L4 H1 H2 H3 H4 H5 D D1 Z/n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS /2 NS /2 NS /3 NS /3 NS /3 NS /3 495

74 complete disposal Curved shape stainless steel (material grade 316) Separator Lipurat-RSE extension stage 2 Product information ACO product advantages Easy to transport and install via single component installation Disposal, cleaning and filling without odour build-up Hydro mechanical high-pressure cleaning - requires only a cold water connection Upgradeable to extension stage 3 Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1½ Inspection window with wiper Ausbaustufe 2 Manual operation of the high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Standard control with centralised fault signal Disposal pump with free flow impeller Motor rating: 3.0 kw/2850 U/min Delivery performance: 20 m³/h with 1 bar medium delivery head Stop valve in front of disposal pump Odour-tight maintenance opening Diameter: 300 mm at NS 1 4 Diameter: 500 mm at NS 7 20 Filling unit with ball valve (connection R ¾ ) for manual re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/6.9 kw System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation With disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation Optionally disposal pump and remote control available No odour build-up 496

75 Separator complete disposal Curved shape stainless steel (material grade 316) Ordering information width Sludge trap Capacity Weight Article No. Grease storage [l] [l] [l] [kg] [kg] Empty Full Right Left NS 2 DN NS 4 DN NS 7 DN NS DN NS 15 DN NS 20 DN inlet DN... min 500 high-pressure spray head maintenance opening switch box filling device with ball valve and pressure regulator ventilation DN 0 outlet DN... disposal connection with Storz-B-coupling R 2½ DIN displayed: NS7, operating side right operating side left would show all components (disposal connection, sight glass, switch box, high pressure pump) positioned mirror-inverted to axis. * not included in the scope of delivery Ø D sight glass with wiper H 3 H 1 connection for heating rod (optional) * stop valve H 2 H 4 H 5 Z Ø D 1 L 3 L 4 L 1 disposal pump L 5 L 2 L 6 high pressure pump Total capacity L1 L2 L3 L4 L5 L6 H1 H2 H3 H4 H5 D D1 Z/n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS /2 NS /2 NS /3 NS /3 NS /3 NS /3 497

76 complete disposal Curved shape stainless steel (material grade 316) Separator Lipurat-RA extension stage 3 Product information ACO product advantages Easy to transport and install via single component installation Disposal, cleaning and filling without odour build-up Pre- and post- cleaning times can be set individually Hydro mechanical high-pressure cleaning - requires only a cold water connection Fitting with a disposal pump possible Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Ausbaustufe 3 Suction and disposal sump with dewatering socket R 1½ Inspection window with wiper Automatic high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Standard control with centralised fault signal Odour-tight maintenance opening Diameter: 300 mm at NS 1 4 Diameter: 500 mm at NS 7 20 Filling unit with solenoid valve (connection R ¾ ) for automatic re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/3.9 kw System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation No odour build-up 498

77 Separator complete disposal Curved shape stainless steel (material grade 316) Ordering information width Sludge trap Capacity Weight Article No. Grease storage [l] [l] [l] [kg] [kg] Empty Full Right Left NS 2 DN NS 4 DN NS 7 DN NS DN NS 15 DN NS 20 DN inlet DN... min 500 Ø D disposal connection with Storz-B-coupling R 2½, DIN high-pressure spray head maintenance opening switch box filling device with solenoid valve and pressure regulator ventilation DN 0 sight glass with wiper outlet DN... displayed: NS7, operating side right operating side left would show all components (disposal connection, switch box, sight glass, high-pressure pump) positioned mirror-inverted to axis. * not included in the scope of delivery H 3 H 1 Ø D 1 L 1 connection for heating rod (optional)* L 3 Z H 2 H 4 H 5 L 4 L 2 L 5 high-pressure pump Total capacity L1 L2 L3 L4 L5 H1 H2 H3 H4 H5 D D1 Z/n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS /2 NS /2 NS /3 NS /3 NS /3 NS /3 499

78 complete disposal Curved shape stainless steel (material grade 316) Separator Lipurat-RAE extension stage 3 Product information ACO product advantages Easy to transport and install via single component installation Disposal, cleaning and filling without odour build-up Pre- and post- cleaning times can be set individually Hydro mechanical high-pressure cleaning - requires only a cold water connection Small installation clearance Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With integrated sludge trap Operator side: right/left Disposal connection, Storz B coupling R 2½ Suction and disposal sump with dewatering socket R 1½ Ausbaustufe 3 Inspection window with wiper Automatic high-pressure interior cleaning with pump pressure: 175 bar Capacity: 13 l/min Milling, mixing, flushing in one step Standard control with centralised fault signal Disposal pump with free flow impeller Motor rating: 3.0 kw/2850 U/min Delivery performance: 20 m³/h with 1 bar medium delivery head Stop valve in front of disposal pump Odour-tight maintenance opening Diameter: 300 mm at NS 1 4 Diameter: 500 mm at NS 7 20 Filling unit with solenoid valve (connection R ¾ ) for automatic re-filling Inlet and drainage connections in accordance with EN 877 Electrical connection: 400 V/50 Hz/16 A/6.9 kw System ACO Passavant Official approval Z Features of basic design: Disposal and cleaning via covers Odour build-up during disposal and cleaning Features of extension stage 1: Odour build-up during cleaning Features of extension stage 2: High-pressure cleaning with manual operation Optionally disposal pump available No odour build-up Features of extension stage 3: Fully automatic operation With disposal pump and remote control available No odour build-up 500

79 Separator complete disposal Curved shape stainless steel (material grade 316) Ordering information width Sludge trap Capacity Weight Article No. Grease storage [l] [l] [l] [kg] [kg] Empty Full Right Left NS 2 DN NS 4 DN NS 7 DN NS DN NS 15 DN NS 20 DN inlet DN... Ø D min 500 high-pressure spray head maintenance opening switch box filling device with solenoid valve and pressure regulator ventilation DN 0 sight glass with wiper disposal connection with Storz-B-coupling R 2½, DIN outlet DN... displayed: NS7, operating side right operating side left would show all componen (disposal connection, switch box, sight glass high-pressure pump) positioned mirror-inverted to axis. * not included in the scope of delivery H 3 H 1 Z connection for heating rod (optional) * Ø D 1 L 3 L 4 L 1 stop valve disposal pump H 2 H 4 H 5 L 5 L 2 L 6 high-pressure pump Total capacity L1 L2 L3 L4 L5 L6 H1 H2 H3 H4 H5 D D1 Z/n [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS /2 NS /2 NS /3 NS /3 NS /3 NS /3 501

80 complete disposal Curved shape stainless steel (material grade 316) Separator Accessories Designation compatible with Description Article No Ø Ø Ø Ø Ø Ø Sampling pipe DN 0 Sampling pipe DN 150 Sampling pipe DN 200 Sampling pipe DN 0 Sampling pipe DN 150 Sampling pipe DN 200 Lipurex/Lipurat/Lipator/Lipatomat NS 1 4 Starch separator Fapurat NS Light-oil separator Coalisator- R/-RD NS 3 Lipurex/Lipurat/Lipator/Lipatomat NS 5.5 Starch separator Fapurat NS 2 Light-oil separator Coalisator- R/-RD NS 6 Lipurex/Lipurat/Lipator/Lipatomat NS Light-oil separator Coalisator-E NS 20 Lipurex/Lipurat/Lipator/Lipatomat NS 1 4 Starch separator Fapurat NS Light-oil separator Coalisator- R/-RD NS 3 Lipurex/Lipurat/Lipator/Lipatomat NS 5.5 Starch separator Fapurat NS 2 Light-oil separator Coalisator- R/-RD NS 6 Lipurex/Lipurat/Lipator/Lipatomat NS Light-oil separator Coalisator-E NS 20 Stainless steel, material grade 316 Curved design Gradient: 70 mm For installation in horizontal pipes DN 0 behind the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 13 kg Stainless steel, material grade 316 Curved design Gradient: 70 mm For installation in horizontal pipes DN 150 behind the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 14 kg Stainless steel, material grade 316 Curved design Gradient: 70 mm For installation in horizontal pipes DN 200 behind the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 15 kg Stainless steel, material grade 316 Curved design For installation in vertical pipes DN 0 behind the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 13 kg Stainless steel, material grade 316 Curved design For installation in vertical pipes DN 150 behind the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 14 kg Stainless steel, material grade 316 Curved design For installation in vertical pipes DN 200 behind the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 15 kg

81 Separator complete disposal Curved shape stainless steel (material grade 316) ca Ø Ø Ø Ø x x 5 ca R 3/4 Designation compatible with Description Article No. Coarse trap DN 0 Coarse trap DN 150 Coarse trap DN 200 Inspection window Filling unit Remote control Remote control Lipurex/Lipurat/Lipator/Lipatomat NS 1 4 Starch separator Fapurat NS Lipurex/Lipurat/Lipator/Lipatomat NS 5.5 Starch separator Fapurat NS 2 LipurexLipurat/Lipator/Lipatomat NS Lipurex-O, -OD, -R, -RD Lipurex-O, -OD, -R, -RD Lipurat/ Hydrojet-OA/RA Lipurat/ Hydrojet-OAE/RAE Starch separator Fapurat-OAE Stainless steel, material grade 316 Curved design Gradient: 70 mm For installation in horizontal pipes DN 0 in front of the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 15 kg Stainless steel, material grade 316 Curved design Gradient: 70 mm For installation in horizontal pipes DN 150 in front of the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 16 kg Stainless steel, material grade 316 Curved design Gradient: 70 mm For installation in horizontal pipes DN 200 in front of the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 17 kg width: DN 200 With screen wiper Weight: 5 kg Free outlet in accordance with DIN 1988 part 4 For connection to the drinking water supply With ball valve R ¾ Weight: 2 kg For interior fitting or installation in connection box Control conduit without customer-side grounding conductor Up to 50 m: 7 x 1.0 mm² m: 7 x 1.5 mm² Protection category IP 54 Weight: 1 kg For interior fitting or installation in connection box Control conduit without customer-side grounding conductor Up to 50 m: 7 x 1.0 mm² 50 m 200 m: 7 x 1.5 mm² Protection category IP 54 Weight: 1 kg

82 complete disposal Curved shape stainless steel (material grade 316) Separator Bohrung Ø40 Designation compatible with Description Article No. 500 Connection box Starch separator For disposal connection and remote control Stainless steel, material grade 304 Fitting: refinements (width x height x depth) 500 x 500 x 160 mm Entsorgungsanschluss Fernbedienung Lüftungsanschluss Flush-mounted frame Connection box (width x height x depth) 565 x 565 x 15 mm Entsorgungsanschluss Bohrung Ø ØR Connection box Flush-mounted frame Stop valve Eco-FPI with direct suction Eco-Jet OD/RD/GD Lipurex OD/RD Hydrojet OS/OSE/RS/RSE Lipurat OS/OSE/RS/RSE Connection box for freestanding installation Starch separator for free-standing installation For disposal connection DN 80 Stainless steel, material grade 304 Design refinements Door stop Right or left Door is lockable (width x height x depth) 370 x 330 x 250 mm Weight: 8 kg Stainless steel, material grade 304 (width x height x depth) 421 x 381 x 25 mm Cast iron Valve plate, stainless steel spindle, material grade H1 H2 DN 0 Length (L): 50 mm Shaft travel (H1 H2): mm Diameter hand wheel: 200 mm DN 150 Length (L): 60 mm Shaft travel (H1 H2): mm Diameter hand wheel: 200 mm L DN 200 Length (L): 60 mm Shaft travel (H1 H2): mm Diameter hand wheel: 250 mm

83 Separator complete disposal Divided shape polyethylene (HD-PE) Designation compatible with Description Article No. Flange connection Stop valve Stainless steel, material grade 304 Sealing: NBR Ø 1 DN 0 Length (L): 75 mm L DN 150 Length (L): 75 mm DN 200 Length (L): 120 mm R 1 1/2 Heating rod For homogenization of the grease layer Inc. control Electrical connection 400 V/50 Hz/16 A/6.0 kw

84 complete disposal Divided shape polyethylene (HD-PE) Separator Eco-Jet-G basic design Product information ACO product advantages Proven stability: 25 years (minimum service life) Can be installed in locations difficult to access, via division of the plant into three parts Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With separate sludge trap Odour-tight maintenance opening, diameter: 450 mm Inlet and drainage connections in accordance with EN 877 System ACO Passavant Official approval Z Ordering information Capacity Weight Article No. Sludge trap Grease storage Total capacity Empty Full [l] [l] [l] [kg] [kg] NS NS inlet DN 0 maintenance opening outlet DN Ø 1 min 500 a b L 1 L L1 L2 A B [mm] [mm] [mm] [mm] NS NS

85 Separator complete disposal Divided shape polyethylene (HD-PE) Eco-Jet-GD extension stage 1 Product information ACO product advantages Proven stability: 25 years (minimum service life) Can be installed in locations difficult to access, via division of the plant into three parts Direct emptying without odour build-up Marginal weight plant in accordance with EN 1825 and DIN For free-standing installation in rooms - frost free With separate sludge trap With disposal connection DN 50 and Storz B coupling R 2 Suction and disposal sump with dewatering socket R 1 Odour-tight maintenance opening, diameter: 450 mm Inlet and drainage connections in accordance with EN 877 System ACO Passavant Official approval Z Ordering information Capacity Weight Article No. Sludge trap Grease storage Total capacity Empty Full [l] [l] [l] [kg] [kg] NS NS inlet DN 0 Ø 1 min 500 disposal connection with Storz-B-coupling R 2 DIN maintenance opening outlet DN a b L 1 L L1 L2 A B [mm] [mm] [mm] [mm] NS NS

86 complete disposal Divided shape polyethylene (HD-PE) Separator Accessories li. Ø li. Ø li. Ø Schmutzfängeminderer Druck- Kugelhahn Ø1 350 Rohrverbinder Designation compatible with Description Article No. Sampling pot DN 0 Sampling pot DN 0 Coarse trap DN 0 Filling unit Eco-Jet/ Hydrojet NS 1 4 Starch separator Fapurat-PE NS Eco-Jet/ Hydrojet NS 1 4 Starch separator Fapurat-PE NS Eco-Jet/ Hydrojet NS 1 4 Starch separator Fapurat-PE NS Eco-Jet G/GD For installation in horizontal pipes DN 0 after the separator plant Curved shape, with Socket seal (material SBR) on the inlet and pipe spigot on the drain Odour tight maintenance opening DN 450 Weight: 7 kg For installation in vertical pipes DN 0 after the separator plant Curved shape, with Socket seal (material SBR) on the inlet and pipe spigot on the drain Odour tight maintenance opening DN 450 Weight: 7 kg For installation in horizontal pipes DN 0 in front of the separator plants Curved shape, with Socket seal (material SBR) on the inlet and pipe spigot on the drain Stainless steel cage, material grade 316 for retention of coarse materials Odour tight maintenance opening DN 450 Weight: 14 kg For installation in front of the separator Stainless steel, material grade 316 Consisting of Pipe sockets DN 0 Length: 300 mm Filling unit with welded odour seal and R ¾ ball valve With pressure reducer 1 pipe connector DN Inlet valve DN 0 Waste water lifting plants Polyethylene grease separator Polyethylene starch separator PVC Construction length: 176 mm Weight: 2.75 kg Ø120 Ø1 Ø

87 Separator complete disposal Divided shape polyethylene (HD-PE) Entsorgungsanschluss Bohrung Ø Designation compatible with Description Article No. Connection box Eco-FPI with direct suction Eco-Jet OD/RD/GD Lipurex OD/RD Hydrojet OS/OSE/RS/RSE Lipurat OS/OSE/RS/RSE For disposal connection DN 80 Stainless steel, material grade 304 Design refinements Door stop Right or left Door is lockable (width x height x depth) 370 x 330 x 250 mm Weight: 8 kg Flush-mounted frame Connection box Stainless steel, material grade 304 (width x height x depth) 421 x 381 x 25 mm Sed tat. Ulput volenis nit atie facipisi. 509

88 partial disposal Stainless steel (material grade 304) Separator Lipator manual operation Product information ACO product advantages Disposal without interruption in operation Optimally suited for installation in rooms with no direct access for disposal vehicles Ideal for use in conjunction with wet waste disposal plants Fresh grease separator plant in accordance with EN 1825 and DIN For installation in frost-protected rooms With integrated sludge trap Stainless steel cabinet and lower section, material grade 304 Heating element and additional thermal insulation for fat homogenization 230 V/1.5 kw Inlet and drainage connections in accordance with EN 877 With ball valve DN 50 for fat and sludge draw-off Collector tank for grease and sediment sludge Capacity: 60 l Cover and hose connection 2 replacement containers with cover Capacity: 60 l Agitating device with 1 phase AC motor in lower housing section 230 V/90 W Manual membrane pump for pressure boost for grease removal Electrical connection 230 V 50/60 Hz 1.6 kw System ACO Passavant Official approval Z (for NS 2 15) Official approval Z (for NS 20) Ordering information width Total capacity Weight Empty Full Diameter x Height Largest individual component Heaviest individual component [l] [kg] [kg] [mm] [kg] Article No. NS 2 DN x NS 4 DN x NS 7 DN x NS DN x NS 15 DN x NS 20 DN x

89 Separator partial disposal Stainless steel (material grade 304) min 500 connection ventilation, cleaning cap agitating device drive inlet DN... outlet DN... grease collecting space heating rod insulating covers grease draw-off sludge draw-off E D C F manual membrane pump inlet DN... stop valve ventilation bridge bottom outlet A switch box sludge collecting space outlet DN... ca. G grease collecting container B note: arrangement of the collecting containe can be turned around the center of the sludge collecting container L L1 L2 L3 H H1 H2 [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS NS

90 partial disposal Stainless steel (material grade 304) Separator Lipatomat automatic control Product information ACO product advantages Automatic controlled grease and sludge draw-off without interruption in operation Optimally suited for installation in rooms with no direct access for disposal vehicles Ideal for use in conjunction with wet waste disposal plants Fresh grease separator plant in accordance with EN 1825 and DIN 4040 For installation in frost-protected rooms With integrated sludge trap Stainless steel cabinet and lower section, material Heating element and additional thermal insulation for fat homogenization 230 V/1.5 kw Inlet and drainage connections in accordance with EN 877 With electrical ball valve DN 50 for fat and sludge draw-off Ordering information width Total capacity Collector tank for grease and sediment sludge Capacity: 60 l Cover and hose connection 2 replacement containers with cover Capacity: 60 l Agitating device with 1 phase AC motor in lower housing section 230 V/90 W Grease layer thickness measurement Control of agitating device Vat fill-level measurement Program control with centralised fault signal for ZLT Filling unit with solenoid valve for supporting sludge and grease draw-off Electrical connection 230 V 50/60 Hz 1.6 kw System ACO Passavant Official approval Z (for NS 2 15) Official approval Z (for NS 20) Weight Empty Full Diameter x Height Largest individual component Heaviest individual component [l] [kg] [kg] [mm] [kg] Article No. NS 2 DN x NS 4 DN x NS 7 DN x NS DN x NS 15 DN x NS 20 DN x

91 Separator partial disposal Stainless steel (material grade 304) min 500 filling device with solenoid valve and pressure regulator agitating device drive inlet DN... outlet DN... grease collecting space grease sensor heating rod insulating covers automatic grease draw-off automatic sludge draw-off D E F stop valve switch box bottom outlet sludge collecting space inlet DN... A connection ventilation, cleaning cap C ventilation bridge outlet DN... ca. G B note: arrangement of the collecting containers can be turned around the center of the facility grease collecting container sludge collecting container L L1 L2 L3 H H1 H2 [mm] [mm] [mm] [mm] [mm] [mm] [mm] NS NS NS NS NS NS

92 partial disposal Stainless steel (material grade 304) Separator Accessories Designation compatible with Description Article No Ø Ø Ø Ø Ø Ø Sampling pipe DN 0 Sampling pipe DN 150 Sampling pipe DN 200 Sampling pipe DN 0 Sampling pipe DN 150 Sampling pipe DN 200 Lipurex/Lipurat/Lipator/Lipatomat NS 1 4 Starch separator Fapurat NS Light-oil separator Coalisator- R/-RD NS 3 Lipurex/Lipurat/Lipator/Lipatomat NS 5.5 Starch separator Fapurat NS 2 Light-oil separator Coalisator- R/-RD NS 6 Lipurex/Lipurat/Lipator/Lipatomat NS Light-oil separator Coalisator-E NS 20 Lipurex/Lipurat/Lipator/Lipatomat NS 1 4 Starch separator Fapurat NS Light-oil separator Coalisator- R/-RD NS 3 Lipurex/Lipurat/Lipator/Lipatomat NS 5.5 Starch separator Fapurat NS 2 Light-oil separator Coalisator- R/-RD NS 6 Lipurex/Lipurat/Lipator/Lipatomat NS Light-oil separator Coalisator-E NS 20 Stainless steel, material grade 316 Curved design Gradient: 70 mm For installation in horizontal pipes DN 0 behind the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 13 kg Stainless steel, material grade 316 Curved design Gradient: 70 mm For installation in horizontal pipes DN 150 behind the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 14 kg Stainless steel, material grade 316 Curved design Gradient: 70 mm For installation in horizontal pipes DN 200 behind the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 15 kg Stainless steel, material grade 316 Curved design For installation in vertical pipes DN 0 behind the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 13 kg Stainless steel, material grade 316 Curved design For installation in vertical pipes DN 150 behind the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 14 kg Stainless steel, material grade 316 Curved design For installation in vertical pipes DN 200 behind the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 15 kg

93 Separator partial disposal Stainless steel (material grade 304) Designation compatible with Description Article No Ø Coarse trap DN 0 Lipurex/Lipurat/Lipator/Lipatomat NS 1 4 Starch separator Fapurat NS Stainless steel, material grade 316 Curved design Gradient: 70 mm For installation in horizontal pipes DN 0 in front of the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 15 kg Ø Coarse trap DN 150 Lipurex/Lipurat/Lipator/Lipatomat NS 5.5 Starch separator Fapurat NS 2 Stainless steel, material grade 316 Curved design Gradient: 70 mm For installation in horizontal pipes DN 150 in front of the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 16 kg Ø Coarse trap DN 200 Spare vat LipurexLipurat/Lipator/Lipatomat NS Lipator/Lipatomat Stainless steel, material grade 316 Curved design Gradient: 70 mm For installation in horizontal pipes DN 200 in front of the separator With pipe connector and tempo clutch Connections in accordance with EN 877 Weight: 17 kg Vat Volume: 60 l With cover and tension ring Height: c. 630 mm Diameter: c. 380 mm Weight: 5 kg Ø

94 system solution Suspension equipment Separator Upstream container mono Product information ACO product advantages Low turbulence waste water feed to the grease separator plant (displacement pump) Low energy consumption Safe pump pneumatic level switching Increased operational safety via air bubble injection Application Low inlet connection in front of the grease separator plant For installation in rooms Polyethylene collector tank Material HD-PE Useable volume: 260 l Compact delivery unit/features Collector tank with inlet socket Suction connecting flange Ventilation connection port DN 0 Fresh-water connection socket R 1½ Maintenance opening with plug cap Locked odour-tight Diameter: 350 mm Filter insert located after inlet Mounting material, measuring tube long/short to the pneumatic level switching With 1 eccentric spiral pump (2 l/s) Ordering information Pressure pipe with special mounting piece Backflow valve Mini compressor for air bubble injection with fitting material Control line for pneumatic level switching Control box/features Electrical connection: 400 V/50 Hz Protection category IP 54 : 380 x 300 x 2 mm (width x height x depth) Plug in, 1.5 m cable with CEE 5 pole plug Coated steel (RAL 7032) wall-mounted cabinet Time-lag fuse according to on-site conditions Operation via key/bosh light toggle switch element Display via direction of turn control, high alarm and 2 malfunction illuminated pushbuttons with cut off and reset function Pneumatic level switching via membrane pressure switch Thermal motor fuse monitoring of pumps Error signals, visual and acoustic Dry contact centralised fault signal and pump operating signal Type width P1 Current consumption 1 m Weight Article No. Empty Full [kw] [A] [l/s] [kg] [kg] 2 DN 0 1, DN DN 150 5, DN 150 5,

95 Separator system solution Suspension equipment 380 x switch box plug-ready control cables of the pneumatic level switch inlet DN * PE-sleeve screw cap SG 385 with threaded ring LW 350 alarm mini compressor ventilation connection DN 0 Ø8-114 special fastening piece for the elastic connection of the pressure pipe H 2 H 1 H Z filter insert OFF NLZ ON pump1 backflow valve flange bend H S H D anchor buoyancy-proof with supplied screws and dowels fresh water connection R 1 1/2 D 1 L long measuring tube with bubble injection (OFF, P1, alarm) inlet DN * PE-sleeve ventilation DN0 / SML (expelled through the roof) eccentric screw pump B Type L B1 Individual component diameter H1 H2 H3 H4 H5 [mm] [mm] [mm] [mm] [mm] [mm] [mm] [mm]

96 system solution Suspension equipment Separator Upstream container duo Product information ACO product advantages Low turbulence waste water feed to the grease separator plant (displacement pump) Low energy consumption Safe pump pneumatic level switching Increased operational safety via air bubble injection Application Low inlet connection in front of the grease separator plant For installation in rooms Polyethylene collector tank Material HD-PE Useable volume: 200 l Compact delivery unit/features: Collector tank with inlet socket Suction connecting flange Ventilation connection port DN 0 Fresh-water connection socket R 1½ Maintenance opening with plug cap Locked odour-tight Diameter: 350 mm Filter insert located after inlet Mounting material, measuring tube long/short to the pneumatic level switching With 2 eccentric spiral pumps Ordering information Type width Consolidated pressure pipe with special mounting piece Mini compressor for air bubble injection with fitting material Control line for pneumatic level switching Control box/features Electrical connection: 400 V/50 Hz Protection category IP 54 : 380 x 600 x 2 mm (width x height x depth) Plug in, 1.5 m cable with CEE 5 pole plug Coated steel (RAL 7032) wall-mounted cabinet Time-lag fuse according to on-site conditions Operation via 2 key/screen light toggle switch elements Display via direction of turn control, high alarm and 2 malfunction illuminated pushbuttons with cut off and reset function Pneumatic level switching via membrane pressure switch Thermal motor fuse monitoring of pumps Error signals, visual and acoustic Dry contact centralised fault signal and pump operating signal P1 Current consumption 1 m Weight Article No. Empty Full [kw] [A] [l/s] [kg] [kg] 2 DN 0 1, DN DN 150 5, DN 150 5,