ACO Marine Grease Traps Program. Grease Traps

Transcription

1 ACO Marine Grease Traps Program Grease Traps

2 Grease Traps ACO Marine grease traps Partial disposal (Sludge and grease only) Principles and Function This type of grease trap is fully resistant against sea movement. The grease accumulates in the upper cone, the sludge drops to the lower cone. The grease is maintained liquid by heating the upper cone. The cleaned water drains freely and continuously through grease trap. The accumulated sludge and grease is drained to collecting tank. Product advantages - 90 % of the total capacity (viz. water) need not be disposed, which leads to significant reduction of disposal costs as well as fresh water consumption - No grease deposits at inside walls due to short stay in separator - Disposal without operation interruption. Flow chart Ventilation 2 Inlet Outlet ACO Marine Stainless Steel Sediments Grease - High temperature resistance - Hygienic material - Absolute UV-resistance - Mechanic rigidity - Resistance to organic solvents

3 ACO Marine grease traps Partial disposal Manual operation LIPATOR Fresh grease trap of stainless steel AISI 304 or 316 NG 2,4,7,10,15 with integrated sludge trap. Automatic LIPATOMAT Fresh grease trap of stainless steel AISI 304 or 316 NG 2,4,7,10,15 with integrated sludge trap. Design / Outfit - Electrical heating at upper cone (230 V, 50 Hz, 800 W) - Inlet/outlet DN... for SML connection, DIN suitable - Stirring device with 1-phase AC motor in bottom part of housing (230 V, 50 Hz, 16 W) - Grease- and sludge extraction, each with ball valves DN 60 (with LIPATOMAT electrically led). 3 Largest single component Total Diameter Type NG DN weight kgs x height mm Weight kgs LIPATOR x x x x x LIPATOMAT x x x x x

4 Grease Traps ACO Marine grease traps Full disposal Principles and function This type of grease trap operates purely mechanically according to the gravity principle (density difference), i.e. heavy substances in the waste water precipitate and light substances, such as for example animal oils and fats, rise to the surface of the water. The sediments in the sludge trap and the grease layer are destroyed by the high pressure jet of the special orbital cleaning head operating at up to 175 bar and are homogenised in order to be rendered pumpable. Depending on the location, the separator content can be sucked through a fixed pipeline (to be provided by the user) or can be removed by a disposal pump, mounted to the grease trap (optional item). Product advantages - Different shapes - Technical design as per requirements Flow chart 4 High-pressure pump unit (for internal cleaning) Inlet Grease Outlet Discharge pump (optional) Sediments

5 ACO Marine grease traps Full disposal Extension stages It is easy to select the appropriate technical method with the aid of the extension stage system. This is illustrated here by the example of a stainless steel grease trap of oval shape full disposal of sludge, grease and water. 1 Extension stage: Standard design LIPUREX -O 2 Extension stage: With direct disposal LIPUREX -OD 3 Extension stage: With direct disposal, high-pressure inner cleaning and manual 5 LIPURAT -OSE 4 Extension stage: With direct disposal, high-pressure inner cleaning and automatic LIPURAT -OAE

6 Grease Traps ACO Marine grease traps Full disposal Product overview Model range LIPUREX -O LIPUREX -OD LIPUREX -R LIPUREX -RD Extension stage 6 STAINLESS STEEL AISI 316 Ti Shape Design Product advantages Nominal size * 10* With direct- suction DN65 Without direct suction Oval Inspection window optional Filling device optional Compact design With direct- suction DN65 Without direct suction Round Inspection window optional Filling device optional Segment design Nominal sizes 15, 20 and larger upon request *integrated sampling device

7 LIPURAT -OS LIPURAT -OA LIPURAT -RS LIPURAT -RA LIPURAT -OSE LIPURAT -OAE Oval Round Oval Manual Automatic Manual Automatic Manual Automatic Remote optional Remote optional With disposal pump Remote optional High-pressure inner cleaning High-pressure inner cleaning High-pressure inner cleaning / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / /32 7 Please note: "" refers to mounting of box/inspection window as viewed from inlet pipe. Legend -O: Oval shape -R: Round shape -G: Separated chambers -D: Plus direct suction (disposal) -S: Plus high-pressure cleaning jet, with manual -A: Plus high-pressure cleaning jet, with automatic -E: Plus mounted disposal pump

8 ACO Marine A/S Thorsvej 9 DK 4100 Ringsted, Denmark Tel.: Fax: acomarine@acomarine.com