New Product Introduction Flatbed Cutting Plotter FC4500 Series

Transcription

1 Desk top flatbed type cutting plotter Suitable for prototyping or small production runs in rigid materials New Product Introduction Flatbed Cutting Plotter FC4500 Series Graphtec Corporation Overseas Sales and Marketing Division

2 Product Concept of FC4500 Series Advanced Flatbed Cutting Plotter for Plotting, Cutting and Creasing/Scoring applications. Expand into the label and package markets by upgraded registration mark sensor and developed new tools. High-speed plotting 750mm/s / 1G usable as test bead machine for tapping or response test in keyboard or touch screen. ARMS built-in. Cutting Master 2 is supplied as standard accessory. Corresponds to USB2.0 interface. Possible to attach 0.9mm diameter cutting blade to magnet type pen holder. FC with stand option FC

3 Product Line Up FC4500 series Model Effective cutting area Media hold-down FC mm x 430mm Electrostatic adhesion or Adhesive sheet FC mm x 600mm Adhesive mat or Adhesive sheet FC FC Electrostatic Adhesive sheet 600 Adhesive mat Adhesive sheet Max. force 600gf, speed 750mm/sec

4 FC4500 series Main Features 1. ARMS Advanced Registration Mark Sensing system 2. Simple creasing function 3. Advanced reverse-side side cutting/creasing function 4. Repeated cutting function 5. 2-Tool holders for easy selection 6. Other new functions

5 1. Built-in ARMS function (Advanced Registration Mark Sensing system) The built-in registration mark sensor furthermore simplifies contour cutting of printed materials. When combined with the Cutting Master 2 software provided as a standard accessory, the ARMS function can be utilized to its maximum potential. 1. Create registration mark 2. Read registration mark 3. Cutting Package Sticker, Label Auto adjustment of ARMS sensitivity expand readable medias. Blue color mark + Silver color background White color mark + Blue color background POP Note It may not be able to read when contrast between background and registration mark are low or high lustrous media is used.

6 2. Simple creasing function A simple creasing function to create fold lines for clean folding on micro-flute and cardboard has been enabled. Point 1: Up to three fold lines can be selected. If two or three fold lines have been selected, the spacing between the lines can be also specified. Repeated creasing operations also can be specified for each of the lines. Creasing start point also can be specified. Guidelines for selecting single-line, doubleline, or triple-line creasing Line spacing Single-line creasing Materials of a thickness of up to 0.1 mm Double-line creasing Cardboard of a thickness of approximately 0.1 to 0.5 mm Triple-line creasing Corrugated cardboard of a thickness of approximately 0.3 to 0.5 mm (rigid cardboard) Point 2: In consideration of the characteristics of corrugated card board (F and G flutes), the creasing force and the cutting force can be specified independently in both the X and Y directions. This prevents surface damage caused by an excessive force.

7 3. Advanced reverse-side cutting/creasing The FC4500 series plotters feature reverse-side cutting and creasing functions to prevent traces of the creasing operation from appearing on the printed surface. (A plain and simple operation is provided when the Cutting Master 2 is used.) 1: The media is loaded on the FC4500 with face up condition. 2: The data for registration mark and cutting/creasing is sent from the Cutting Master 2. 3: FC4500 cuts out the registration mark in order to be able to read it from the reverse side. 4: The media is flipped over and is loaded on the FC4500. It is face down condition. 5: FC4500 starts reading the registration mark and then it makes creasing/cutting the media from the reverse side. Reading the registration marks from the printed side. Cut out area Cutting out the registration marks from the printed side. Reading the registration marks from the reverse side and creasing/cutting media.

8 4. Overlay Function (Repeated Cutting Function) Overlay function can make FC4500 cut a thick media which is difficult to cut by a single cutting operation. Send a data... Cutting 1 st, 2 nd,3 rd... 9 th The various media can be cut with multi pass cutting!! 5. 2 tool Holders of FC FC can be equipped with 2 kind of tools simultaneously. 1 st Holder CB15U/-K30/-K20/UB/CB09/CP001 (Max. Force 600g & Speed 75cm/s) 2 nd Holder Pen/CB09 (Max. Force 300g & Speed 30cm/s) PHP32 series can be mounted to screw type tool holder PHP31 series can be mounted to screw type and magnet type tool holder (PHP31-CB09-HS Only)

9 6. Other New Functions Tool Exchange Assisting Not only FC (2pen type), FC (1pen type) also can be used for making a package sample or POP by exchanging a cutting blade with creasing tool!! Creasing Cutting FC4500 series makes your attention by alarm and pauses job in order to be able to exchange tool when cutting plotter receives pen change command. CHANGE TOOL! PRESS ENTER KEY!! Creasing Alarm sound Exchange tool Cutting Perforation Cutting Line can be cut with perforated line Short line Segment Setting Tool Carriage Moving Speed It is possible to set the speed and acceleration separately for the short lines and the long lines. Moving speed can be changed between low and high using NEXT key. Position + Next key => High speed

10 Spec Comparison 1 Model Specification Pen Holding Method FC2250 Tool 1: Holding with screw (max. 500gf) Tool 2: Holding with screw (max. 1kgf) FC FC FC /60 FC Tool 2: Holding with magnet (max. 300gf) FC4500 Tool 1: Holding with screw (max. 600gf) Tool 2: Holding with screw (max. 600gf) Tool 2: Holding with magnet (max. 300gf) FC4200 Tool 1: Holding with screw (max. 600gf) Tool 2: Holding with screw (max. 600gf) Cutting Force parameter Tool 1: 1,2,3,,,,,,40 Tool 2: 2,4,6,,,,,,80 Tool 1: 1,2,3,,,,48 Tool 2: 1,2,3,,,,30 Tool 1: 1,2,3,,,,48 Tool 2: 1,2,3,,,,48 Tool 1: 1,2,3,,,,48 Tool 1: 1,2,3,,,,30 Tool 2: 1,2,3,,,,48 Tool 2: 1,2,3,,,,48 Settable Speed parameter Tool 1: 1,2,3,,,,,,,40cm/s Tool 2: 1,2,3,,,,,,,40cm/s Tool 1: 1,2,3,,,,,,,75cm/s Tool 2: 1,2,3,,,,,,,30cm/s Tool 1: 1,2,3,,,,,,,75cm/s Tool 2: 1,2,3,,,,,,,30cm/s Tool 1: 1,2,3,,,,,,,60cm/s Tool 2: 1,2,3,,,,,,,30cm/s Tool 1: 1,2,3,,,,,,,60cm/s Tool 2: 1,2,3,,,,,,,30cm/s Acceleration Max. 0.6G Max. 1G Max. 0.6G Interface USB2.0(Full Speed) and RS-232C USB2.0(Full Speed) and RS-232C USB2.0(Full Speed) and RS-232C Centronics and RS-232C Centronics and RS-232C Condition setting No Simple Creasing Available Available Initial Cutting Force setting Available Available Available Cutting Force setting X-axis and Y-axis separately Selectable to set force for X-axis and Y-axis separately or the same The same setting in X- axis and Y-axis X-axis and Y-axis separately

11 Spec Comparison 2 Model Specification ARMS FC2250 Ver. 3.0, Supported four (4) marks mode FC4500 FC4200 FC FC FC /60 FC Ver. 4.0, Supported sensitivity adjustment Ver. 1.0, Not supported by the software Reverse-side Cutting function Available, NOT supported by ARMS Available, supported by ARMS Available, NOT supported by ARMS Overlay function Available, Selectable number of pass Available, Selectable number of pass, cutting force for 1st pass and 2nd pass, and mode (ALL or BLOCK) Short Line Segment setting Available, Speed and Acceleration can be set for short line Perforate Cutting function Available Available Available Blade-tip Initial Control Position 2mm Below / Outside (lower left corer) 2mm Below / Outside (lower left corner) / Outside of Y-axis 2mm Below / Outside (lower left corner) Manual Tool Exchange assistance Available Available Beeper View Available Tool Movement Speed (in tool up) Speed can be set Speed and Acceleration can be set Speed can be set Tool Carriage Movement Speed (in position key) Speed is changed from low to high by pressing NEXT key Speed is changed from low to high by pressing NEXT key Speed is automatically changed from low to high by holding position key in a few seconds

12 Main Target of FC4500 series Seal & Label Sandblast Mask Stencil Shoe Pattern Application Specially Focusing Electric Industry Print on Demand

13 Target Application 1 Print on Demand POP Making sample, prototype of Dressing Package by Micro flute or Card board Creasing Die Cut Small package for Food, Cosmetic products, Electric products, and etc. 3D POP and a wide variety of POP in sample or small production FC4500 is suitable to make it by using ARMS and Reverse-side cutting function. Usage of micro-flute is increasing at the recent time by ecological awareness, and also considered the future trend. FC4500 is suitable to cut the G or F grade of micro-flute. It is laminated or pouched in some case, media also can be cut by FC4500. High cutting quality is required. FC4500 can provide it.

14 Target Application 2 Electric Industry For FPD (Flat Panel Display) Protection Film, Polarization Film, Condenser Film, etc. Mostly thinner PET films are used for FPD. FC4500 cutting plotter series is very suitable for making prototype. Electrical Industry Making sample, prototype of FPC (Flexible Print Circuit) FPC is created in multiple layers. The base film is 12 micrometer from 50 micro meter thick. The conductive foil which is 12 micro meter from 50 micro meter is glued on the base. FPC is more thin comparing a typical rigid board which has thickness of 0.3mm to 1.6mm. FC4500 series cutting plotter are very suitable for cutting it.

15 Target Application 3 Touch Panel Screen Printing Touch panel test Membrane switch, Printed PET Label In recent years, For portable game machine and/or PDA, the demand for testing touch screen has been dramatically increased. FC4500 series has 75cm/s as moving speed and 1G acceleration. It has been improved the capability for using FC4500 to touch screen test. Printed panel and adhesive tape which are mounted on the electrical board are cut for making prototype. Customer want to have high quality prototype. Label or nameplate is printed on demand in small quantity production. FC4500 is suitable for cutting without cutting die.