Specifications 09/01/2017

Transcription

1 Specifications 09/01/2017 To Hindu Samaj Temple Santhi Subramaniam 911 NW 11th Avenue Rochester, MN Project Hindu Samaj Temple (September '17 Rev) Celebration Court NE Rochester, MN From Horizon Equipment Kevin LaMere 1960 Seneca Road Eagan, MN (651) (651) (Contact) We appreciate the opportunity to help you with your foodservice needs. We appreciate the opportunity to help you with your foodservice needs. ITEM 1 MOP SINK (1 REQ'D) Mustee Model 63MMX 24" x 24" Fiberglass Mop Sink ITEM 2 SERVICE FAUCET (1 REQ'D) Fisher Model 8253 Service Sink Faucet, 1/2" inlet, long spout and vacuum breaker, polished chrome, includes EZ Install adapter, POP packaging INLET OUTLET 1 1/2" 1/2" 1 ITEM 3 SHELVING, WALL MOUNTED (1 REQ'D) John Boos Model EWS X Dimensions: 9.5(h) x 36(w) x 16(d) Shelf, wall mount, 16" W x 36" L, finished with stallion safety edge front, 1 1/2" turned up backsplash, (2) support brackets, 18/300 stainless steel with # 4 polish, NSF, KD (FLYER) Page 1 of 26

2 ITEM 4 WORK TABLE, 36", STAINLESS STEEL TOP (1 REQ'D) John Boos Model ST6R5 3036SSK X Dimensions: 35.75(h) x 36(w) x 30(d) Work Table, 36"W x 30"D, 16/300 stainless steel top with 5" backsplash, Stallion safety edge front, 90 turndown on sides, 18 gauge stainless steel adjustable undershelf, stainless steel legs & bullet feet, NSF, KD (FLYER NET PRICING) 1 ea Standard flyer accessories only, NO modifications to flyer items allowed or their accessories ITEM 5 SPARE NO. ITEM 6 HAND SINK (2 REQ'D) John Boos Model PBHS W DM SSLR X Dimensions: 13.13(h) x 17(w) x 17(d) Pro Bowl Hand Sink, wall mount, 14"W x 10" front to back x 5" deep bowl, 1 7/8" drain, drain basket included, deck mount faucet on 4" centers, all stainless steel construction, with left & right side splashes, NSF, CSA (faucet NOT included) (FLYER) 1 ea Fisher Model 3525 Faucet, 4" c/c deck mount, mixing valve, 6" swing gooseneck spout, with 1/2" inlets INLET OUTLET /8" 2 1/2" 1/2" 2 ITEM 7 GARBAGE CAN (4 REQ'D) Winco Model PTC 23K Slender Trash Can, 23 gallon, (lid not included), black ITEM 8 WORK TABLE, 94" 98", STAINLESS STEEL TOP (1 REQ'D) John Boos Model MC4R Q Work Table, cabinet base with hinged doors, 96"W x 30"D, 14/300 stainless steel top with 5" backsplash & turndown with Stallion Safety Edge front and square turndown ends, 18/430 stainless steel wrap with legs, adjustable feet, with 3 fully enclosed drawers across the cabinet above the doors. ITEM 9 CABINET, WALL MOUNTED (1 REQ'D) John Boos Model WCH 7215 Cabinet, wall mount, enclosed design with hinged doors, 72" long with single intermediate shelf, stainless steel construction and sloped top Page 2 of 26

3 ITEM 10 SPARE NO. ITEM 11 MICROWAVE OVEN (1 REQ'D) ACP Model RMS10TS Dimensions: 12.25(h) x 20(w) x 16.5(d) Amana Commercial Microwave Oven, 0.8 cu. ft. capacity, 1000 watts, low volume, 10 menu pads with capacity to program 20 menus, 5 power levels, 3 cooking stages, 60 minute max cooking time, LED display, touch control, interlock safety switch, ADA compliant Braille touch pads, audible end of cycle signal, sealed in ceramic shelf, side hinged door with see thru door, lighted interior, stainless steel exterior wrap & interior, 120v/60/1 ph, 1500 total watts, 13 amps, 15 MCA, NEMA 5 15P, culus, ETL 1 ea 3 year limited warranty (Year 1: parts, labor and travel are covered; Year 2 and 3: Magnetron tube (part only) are covered) ELECTRICAL VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP Cord & P Plug ITEM 12 MICROWAVE SHELF (1 REQ'D) John Boos Model EBMS X Dimensions: 15(h) x 24(w) x 20(d) Microwave Shelf, wall mount, 24"W x 20"D x 15"H, 16 gauge 300 series stainless steel, Stallion safety edge front with raised lip, NSF ITEM 13 PROOFER CABINET, MOBILE (1 REQ'D) Carter Hoffmann Model HL4 18 Dimensions: 70.63(h) x 26.5(w) x 31.5(d) hotlogix Humidified Holding Cabinet/Heater Proofer HL4 Series, full height, mechanical controls for heat & humidity, forced air heat with water reservoir, fixed wire universal slides, (18) 18" x 26" pans, (36) 12" x 20" x 2 1/2" pans, solid single pane glass door in extruded aluminum frame, insulated aluminum construction, 5" casters, 120/60/1 ph, 2100W, 15.0amps, NEMA 5 20P, ETL, ETLsan (RapidShip) 1 ea 3 Year parts & labor warranty, standard 1 ea 120v/60/1 ph, 2100 watts, 17.5 amps, 8 ft cord with NEMA 5 20P, standard 1 ea Solid single pane glass door in extruded aluminum, standard ELECTRICAL VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP P Cord & Plug 5 20P Page 3 of 26

4 ITEM 14 ICE CUBER (1 REQ'D) Hoshizaki Model KML 500MAJ Dimensions: 22(h) x 30(w) x 27.38(d) Ice Maker, Cube Style, air cooled, self contained condenser, production capacity up to 442 lb/24 hours at 70 /50 (400 lb AHRI certified at 90 /70 ), stainless steel finish, crescent cube style, R 404A refrigerant, 115v/60/1 ph, 7.6 amps, NSF, UL, ENERGY STAR 1 ea Warranty: 3 Year parts & labor on entire machine 1 ea Warranty: 5 Year parts & labor on evaporator 1 ea Warranty: 5 Year parts on compressor & air cooled condenser 1 ea Model B 500SF Ice Bin, top hinged front opening door, AHRI certified 500 lb ice storage capacity, for top mounted ice maker, stainless steel exterior, painted legs included, protected with H GUARD Plus Antimicrobial Agent, ETL Sanitation 1 ea Model H Water Filtration System, single configuration 1 ea Model H Replacement Water Filter Cartridge, each ELECTRICAL VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP INLET OUTLET 1 1/2" 1 3/4" 2 2 3/4" PLUMBING 1 REMARKS Ice maker drain ITEM 15 SPARE NO. ITEM 16 LAMINATED CABINET (1 REQ'D) Custom Model CABINET Custom 54" x 24" x 34" laminated cabinet on front, sides. with 3 hinged doors, 3/4" plywood sub top, on 6" stainless steel legs. Standard Wilsonart or Formica 1 ea Model TOP Stainless steel top only with 6" backsplash for water station cabinet, 48" x 18" ITEM 17 FILTER ASSEMBLY (1 REQ'D) 3M Purification Model ICE125 S Dimensions: 17(h) x 4.5(d) 3M Valve In Head Water Filter System with Gauge, 17"H x 4.5"D, high turbidity water, single vessel, 3/8"FNPT, 1/4 turn shut off valve, max pressure of 125 psi at 100 F, for sediment, chlorine taste & odor, scale, 1 micron rating, 1.5 gpm flow rate, 10,000 gallon capacity, for ice machines (cubers up to 750lbs, flakers up to 1200lbs), integral mounting bracket and single o ring seal cartridge filter included, NSF (for Cubed Ice makers, Manitowoc I 0302, 0303, 0304, 0305, 0322, 0323, 0324, 0325, 0452, 0453, 0454, 0455, 0502, 0503, 0504, 0505, 0522, 0523, 0523, 0524, 0525, 0594, 0592, 0606, 0696, Scotsman C 0322, 0330, 0522, 0530, 0630, Hoshizaki IM500, KM 250,, 320, 351, 410, 450, 451, 515, 600, 631, 650, Ice O Matic ICE 0250, 0305, 0320, 0400, 0406, 0500, 0506, 0520, 0525, 0605, 0606, Koolaire K0250, 0350, 0420, 0500, 0600) Page 4 of 26

5 INLET OUTLET 1 3/8" 1 ITEM 19 TRASH (3 REQ'D) Custom Model TRASH RECEPTACLE Laminated trash receptacle, hinged trash door, tray return area ITEM 20 SPARE NO. ITEM 21 BLIXER (1 REQ'D) Robot Coupe Model BLIXER 3 Dimensions: 16.94(h) x 11.81(w) x 8.75(d) Blixer, Commercial Blender/Mixer, vertical, 3.5 qt. capacity, stainless steel bowl with handle, ABS polycarbonate wiper assembly, stainless steel "S" serrated blade assembly, on/off buttons, pulse switch, single speed 3450 RPM, 1 1/2 HP, 120v/60/1 ph, 10.5 amps, NEMA 5 15P, cetlus, ETL Sanitation 1 ea 1 year parts & labor warranty ELECTRICAL VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP Cord & P /2 Plug ITEM 22 CAN OPENER (1 REQ'D) Edlund Model 1S Can Opener, manual, #1 with stainless steel base (for cans up to 11" tall), "Old Reliable" 1 ea 1 year limited warranty, standard ITEM 23 WORK TABLE (1 REQ'D) John Boos Model ST6R SSK X Dimensions: 35.75(h) x 108(w) x 30(d) Work Table, 108"W x 30"D, 16/300 stainless steel top with 5" backsplash, Stallion safety edge front, 90 turndown on sides, 18 gauge stainless steel adjustable undershelf, stainless steel legs & bullet feet, NSF, KD 2 ea Model DR2020SC S30 X Drawer, for 30"D work tables, 20"W x 20"D x 5"deep, stainless steel front & drawer pan, self closing, roller bearing slides, NSF, for stainless steel table tops only (FLYER) 1 ea Model 0205A On the left Page 5 of 26

6 ITEM 24 RICE COOKER (2 REQ'D) Thunder Group Model RER55ASN Rice Cooker, 55 cup capacity, lift off cover, piezo pilot ignition, flame failure safety device, 1/2" NPT female, 35,000 BTU, Natural gas, Rinnai, NSF, CSA Star GAS STEAM MBTU KW INLET RETURN LB/HR PSIG (MIN) PSIG (MAX) 1 1/2" ITEM 25 SPARE NO. ITEM 26 TIERED EQUIPMENT STAND, FOR COUNTERTOP COOKING (1 REQ'D) John Boos Model RICE COOKER STAND Dimensions: 24(h) x 48(w) x 30(d) Equipment Stand, open base, 42"D x 24"W, 16/300 stainless steel top with 1 1/2" upturn on sides & rear, stainless steel legs & adjustable undershelf, adjustable bullet feet, KD, NSF, CSA Sanitation ITEM 27 STEAMER, CONVECTION, COUNTERTOP, BOILERLESS (1 REQ'D) Market Forge Model ALTAIR II 6 Dimensions: 33.25(h) x 24(w) x 28.5(d) Altair II Convection Steamer, electric, (1) compartment, (6) 12" x 20" pan capacity, boilerless, auto water system, manual controls, 3 cook settings, includes super steam, 60 minute timer, aluminum cast cooking compartment, stainless steel exterior, preheated incoming water, clean water reservoir system, 4" legs, UL/cUL listed 1 ea Standard (1) one year parts & labor warranty, equipment only 1 ea 6 pan: 208v/60/3 ph, 9.8 kw, 27.2 amps 1 ea Model SSS Stationary Stand, 29.75" high, with removable slide out shelf, undershelf, UL, cul ELECTRICAL VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP Direct ELECTRICAL 1 REMARKS 6 pan INLET OUTLET 1 3/4" 1 1" 2 2 1/2" PLUMBING 1 REMARKS Drain out PLUMBING 2 REMARKS Page 6 of 26

7 Trough drain ITEM 28 RANGE, STOCK POT, GAS (2 REQ'D) Southbend Model SPR 2J FB Dimensions: 40.5(h) x 18(w) x 22.5(d) Stock Pot Range, 18", (2) cast iron burners, double, manual controls, one piece tray, stainless steel front, front rail & sides, legs with adjustable feet, 90,000 BTU, CSA, NSF 2 ea Natural Gas 2 ea Standard (3) years limited parts and labor warranty (reference warranty document for details) 2 ea FMP Model JetForce Gas Connector Kit, 3/4" x 48" L, includes disconnect, restraining cable, (1) male flare fitting, (1) female flare fitting, hardware GAS STEAM MBTU KW INLET RETURN LB/HR PSIG (MIN) PSIG (MAX) 1 3/4" ITEM 28 RANGE, STOCK POT, GAS <ALTERNATE> (1 REQ'D) Southbend Model SPR 1J Dimensions: 24(h) x 18(w) x 22.5(d) Stock Pot Range, (1) 3 ring cast iron burner, single, manual controls, one piece tray, stainless steel front, front rail sides, legs with adjustable feet, 120,000 BTU, CSA, NSF 1 ea <Alternate> Domestic Shipping, inside of North America 1 ea <Alternate> Natural Gas 1 ea <Alternate> Standard (3) years limited parts and labor warranty (reference warranty document for details) GAS STEAM MBTU KW INLET RETURN LB/HR PSIG (MIN) PSIG (MAX) 1 3/4" ITEM 29 SINGLE HOLE FAUCET Fisher Model Faucet, single, wall mount, with 11" control swing spout, 13" double jointed & wrist handle ITEM 30 SPARE NO. ITEM 31 RANGE, 60", 4 BURNERS, 36" GRIDDLE (1 REQ'D) Southbend Model 4601DD 3TL Dimensions: 59.5(h) x 60.75(w) x 34(d) Ultimate Restaurant Range, gas, 60", (4) non clog burners, standard grates, (1) 36" griddle left, thermostatic controls, standing pilot, (2) standard ovens with battery spark ignition, includes (1) rack per oven, 22 1/2" flue riser with shelf, stainless steel front, sides, shelf & 6" adjustable legs, 286,000 BTU, ccsaus, CSA Flame, CSA Star, NSF 1 ea Domestic Shipping, inside of North America Page 7 of 26

8 1 ea Standard one year limited warranty (range) 1 ea NOTE: 22.5" high flue riser, with heavy duty shelf, standard 1 ea Natural Gas 1 ea Casters, 2 locking & 2 standard, in lieu of legs GAS STEAM MBTU KW INLET RETURN LB/HR PSIG (MIN) PSIG (MAX) 1 3/4" ITEM 31 RANGE, 60", 4 BURNERS, 36" GRIDDLE <ALTERNATE> (1 REQ'D) Southbend Model S60DD 3TL Dimensions: 59.5(h) x 60.75(w) x 34(d) S Series Restaurant Range, gas, 60", (4) 28,000 BTU open burners, (1) 36" griddle left, thermostatic controls, (2) standard ovens, snap action thermostat, removable cast iron grates, (2) crumb drawers & shelf, hinged lower valve panel, includes (1) rack per oven, stainless steel front, sides, shelf, 4" front rail & 6" adjustable legs, 246,000 BTU, ccsaus, CSA Flame, CSA Star, NSF 1 ea <Alternate> Domestic Shipping, inside of North America 1 ea <Alternate> Standard one year limited warranty (range) 1 ea <Alternate> Natural Gas 1 ea <Alternate> Casters, 2 locking & 2 standard, in lieu of legs GAS STEAM MBTU KW INLET RETURN LB/HR PSIG (MIN) PSIG (MAX) 1 3/4" ITEM 32 FRYER, GAS, FLOOR MODEL, FULL POT (1 REQ'D) ANETS Model SLG100 Dimensions: 45.5(h) x 19.5(w) x 31(d) SilverLine Fryer, gas, floor model, lb. oil capacity, 4 tube burners, snap action millivolt control, standing pilot, stainless steel tank, front & door, 150,000 BTU, CE, NSF, CSA (Contact Factory for volume discounts) 1 ea John Boos Model Z HORIZON 001 Fryer Splash, 24" long x 11" high, left, stainless steel, 18 ga. per each 1 ea One year parts and labor warranty from the date of installation up to a maximum of 15 months from the date of manufacture (with appropriate documentation), standard 1 ea One year frypot warranty from the date of installation up to the maximum of 15 months from the date of manufacture (with appropriate documentation) 1 ea Natural gas (specify elevation if over 2000 ft) 1 st Casters, 2 stationary, 2 locking (per set) 1 ea FMP Model JetForce Gas Connector Kit, 3/4" x 48" L, includes disconnect, restraining cable, (1) male flare fitting, (1) female flare fitting, hardware GAS STEAM MBTU KW INLET RETURN LB/HR PSIG (MIN) PSIG (MAX) 1 1/2" ITEM 32 DONUT FRYER <ALTERNATE> (1 REQ'D) Belshaw Adamatic Model 718LCG 120V NG Dimensions: 64(h) x 25(w) x 39(d) (21263) Donut Fryer, natural gas, floor model, 96 lb. shortening capacity, electronic ignition, 18" x 26" fry area, exterior drain valve, (2) frying screens with bolt on handles, stainless steel tank, cabinet and drain tray, adjustable, bolt down legs, 44,000 BTU, ETL, NSF, ANSI, CSA 1 ea <Alternate> One year parts & labor warranty, standard 1 ea <Alternate> 120v/60/1 ph, standard 1 ea <Alternate> LH Drain tray on left hand side (if fryer mounted depositor is selected, it will Page 8 of 26

9 be mounted on right) ELECTRICAL VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP GAS STEAM MBTU KW INLET RETURN LB/HR PSIG (MIN) PSIG (MAX) 1 1/2" ITEM 33 WORK TABLE, 18", STAINLESS STEEL TOP (1 REQ'D) John Boos Model EFT8 3018SSK Dimensions: 36(h) x 18(w) x 30(d) Filler Table, 18"W x 30"D, 18/430 stainless steel top with 1 1/2" backsplash, with Stallion safety edge front & back, 90 turndown on sides, stainless steel legs & adjustable undershelf, plastic feet, NSF, KD ITEM 34 EXHAUST HOOD (1 REQ'D) Accurex Model EXHAUST SYSTEM Exhaust (CFM): MUA (CFM): 2,880 2,160 Hood: Supply Plenum (Front): Collar(s): Exhaust: MUA: 144" L x 57" W x 30" H 144" L x 14" W x 10" H (1) 9" W x 28" L (4) 10" W x 20" L Configuration: Performance Enhancing Lip (P.E.L.) for up to 31% Lower Exhaust Rates Sloped Grease Trough with Enclosed Grease Cup per NFPA 96 Requirements Material 430 SS Where Exposed UL 710 Listed w/ out Exhaust Fire Damper Filter Baffle Stainless Steel Lights Globe Light Fixtures (bulbs not included) (4) Factory Mounted Exhaust Collar(s) Factory Mounted Supply Collar(s) Factory Mounted 3" Back Airspace Accessories: Air Supply Plenum (ASP) on Front Stainless Steel Backsplash Panel 80" High 144" Long ***INSTALLATION OF EXHAUST EQUIPMENT BY OTHERS 1 ea Volume (CFM): SP (in. wg): FRPM (RPM): Motor Power (hp): Voltage: Phase: Page 9 of 26

10 Hertz: 2, Cycle Configuration: Belt Drive Fan Motor 1 hp, ODP, 208/60/3, 1725 rpm Factory Mounted Drive 1116 RPM Factory Mounted Motor VFD Rated without Shaft Grounding Protection UL/cUL 762 Listed "Power Ventilators for Rest. Exh. Appliances" Switch, NEMA 3R, Toggle, Shipped with Unit Junction Box Mounted & Wired Hinged Base (Attached) Grease Trap (PN ) Heat Baffle (Attached) Clean out Port Unit Warranty: 1 Yr (Standard) Accessories: Roof Curb Galv., GPFP 30 G12, Under Sized 1.25 in. Total, Pitch To Be Selected Curb Extension Galv., VCE 30 G11 Curb Seal (Attached) ***INSTALLATION OF EXHAUST EQUIPMENT BY OTHERS ***VERIFY ROOF CURB 1 ea Volume (CFM): SP (in. wg): Page 10 of 26

11 FRPM (RPM): Motor Power (hp): Operating Motor Power (hp): Voltage/Hertz/Phase: 2, /60/3 Heating: Direct Gas (Natural) Energy In/Out: 288.1/265.0 MBH Leaving Dry Bulb: 70.0 F Configuration: Air Flow Arrangement: Outdoor Air Only Filter Section: Alum., 3 16x25x2 Damper: Inlet Outdoor Air Intake Position: End Discharge Position: End Coating: Galvanized Insulation: Duct Liner Heat Source On Access Side: Right Hand Control Center Freeze Protection Heat Inlet Air Sensor Approvals: ETL and IRI, Minnesota Code Temperature Control: Discharge Flame Sensing: Flame Rod Ignition Control: Direct Spark Unit Rated Gas Pressure: 1/2 PSI Page 11 of 26

12 Mounting: By Others Unit Warranty: 1 Yr (Standard) Accessories: Mounting: By Others 1 ea Hood System Size: 3.75 Gallon Mounting Location (Hood): Remote Mounted Configuration: Wall Mounted Enclosure All Required System Parts Included Pre piped Hood with Detection Factory Coordinated Install Permits and Puff (air) Test Included Protects hood(s): Exhaust Hood Section 1 Accessories: Mechanical Shutoff Valve, 2.00" (Amerex) ***INSTALLATION OF EXHAUST EQUIPMENT BY OTHERS 1 ea Exhaust Fan(s): Supply Fan(s): Fan Switch(es): Light Switch(es): Thermal Switch(es): Enclosure Size: Mounting Location: User Interface Mounting: 12" L x 20" H x 6" D Ship Loose On Control Package Page 12 of 26

13 Configuration: UL Listed Material 300 SS Enclosure Turn on Exhaust in Fire Mode Thermal Overloads in Cabinet Power For Shunt Trip MUA Interface for Supply Fan Temperature Interlock with digital display and remote temperature adjustment Automatically starts fans when cooking occurs in compliance with IMC codes Temperature Interlock Sensors Installed (2) ***INSTALLATION OF EXHAUST EQUIPMENT BY OTHERS 1 ea Exhaust (CFM): 613 Hood: Collar(s): Exhaust: 42" L x 42" W x 30" H (1) 11" W x 15" L Configuration: Performance Enhancing Lip (P.E.L.) for up to 31% lower exhaust rates Material 300 Series SS 100% Construction Factory Mounted Exhaust Collar(s) ***INSTALLATION OF EXHAUST EQUIPMENT BY OTHERS 1 ea Volume (CFM): SP (in. wg): FRPM (RPM): Motor Power (hp): Voltage: Phase: Hertz: Page 13 of 26

14 1327 1/ Cycle Configuration: Direct Drive Fan Motor 1/4 hp, ODP, 115/60/1, 1725 rpm Factory Mounted PSC Motor UL/cUL 705 Listed "Power Ventilators" Switch, NEMA 1, Toggle, Shipped with Unit Junction Box Mounted & Wired Unit Warranty: 1 Yr (Standard) Accessories: Roof Curb Galv., GPIP 19 G18, Under Sized 1.5 in. Total, Pitch To Be Selected Curb Seal (Attached) Damper Shipped Loose, WD 100 PB 12X12, Gravity Operated, Not Coated Solid State Speed Control, 6 Amp, Shipped Loose ***INSTALLATION OF EXHAUST EQUIPMENT BY OTHERS ***VERIFY ROOF CURB 1 ea HORIZON Model CUSTOM Start up and commissioning of make up air and exhaust system ITEM 35 SPARE NO. Page 14 of 26

15 ITEM 36 PASS SHELF (1 REQ'D) Custom Model WALL MT PASS SHELF 9' long x 24" wide stub wall mount pass through shelf, stainless steel, turn down on all sides. ITEM 37 PREP SINK (1 REQ'D) John Boos Model ST6R5 3096SSK Dimensions: 35.75(h) x 96(w) x 30(d) Work Table, 108"W x 30"D, 16/300 stainless steel top with 5" backsplash, Stallion safety edge front, 90 turndown on sides, 18 gauge stainless steel adjustable undershelf, stainless steel legs & bullet feet, NSF 1 ea Model CUT Weld In Undermount Sink, one compartment, 16"W x 20"L x 12"D, 16/304 stainless steel fabricated bowl, includes cutout, bowl, faucet holes & welding/polishing (Not available for FBLG & UFBLG) 2 ea Model DR2015 S30 X Drawer, for 30"D work tables, 15"W x 20"D x 5"deep, stainless steel front & drawer pan, roller bearing slides, NSF, for stainless steel table tops only (FLYER) 1 ea Fisher Model Faucet, backsplash mount, 8" c/c, 12" long swing spout, 1/2" inlets 1 ea Fisher Model Twist Waste Standard Valve, 3 1/2" industry standard sink opening, 2" drain outlet, basket strainer, 12 GPM drain rate, stainless steel, CSA INLET OUTLET 1 1/2" 2' 0" 1/2" 2' 0" 1 2" PLUMBING 1 REMARKS PC TO EXTEND & CONNECT & ITEM 39 PASS THROUGH SERVING COUNTER (1 REQ'D) Custom Model SERVING COUNTER 14' long x 48" wide sub wall mounted serving counter, 12" front overhang, to accomodate 4 well drop in food well, brackets to stabilize shelf. ITEM 40 SPARE NO. ITEM 41 FOOD WELL UNIT, DROP IN, REFRIGERATED (1 REQ'D) Delfield Model N8130B Dimensions: 21.87(h) x 30.75(w) x 26(d) Drop In Mechanically Cooled Pan, 30 3/4"W x 26" D, 2 pan size, 1" dia. drain, insulated pan, stainless steel inner liner & top, galvanized steel outer liner, includes adapter bars, self contained refrigeration, 1/5 hp, (29 3/4" x 25" cutout required), cul, UL, NSF 7 1 ea NOTE: Freight quotes are only valid from Delfield 1 ea 115v/60/1 ph, 4.0 amps, NEMA 5 15P, standard 1 ea 1 year parts & 90 day labor warranty, standard 1 ea 1" high perforated false bottom (two pan size) Page 15 of 26

16 ELECTRICAL VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP 1 1/5 Cord & P 4.0 Plug INLET OUTLET 1 1 1" ITEM 42 FOOD WELL UNIT, DROP IN, ELECTRIC (1 REQ'D) Wells Model MOD 400TDM Dimensions: 9.75(h) x 57.5(w) x 23.63(d) Food Warmer, top mount, built in, electric, (4) 12" x 20" openings with manifolded drains with one valve, wet/dry operation, thermostatic controls, stainless steel interior, insulated aluminum steel housing, culus 1 ea Limited 2 year parts & 1 year labor warranty, standard 1 ea Note: Must specify voltage and phase 1 ea Model /240v/60/3 ph, 1.24/1.65 kw per well (field convertible to single phase) 4 ea Model Drain Screen, one per well ELECTRICAL VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP 1 208/ /6.6 ELECTRICAL 1 REMARKS field convertible to 1 ph INLET OUTLET 1 1 1/2" ITEM 43 SOILED DISHTABLE (1 REQ'D) John Boos Model SDT6 S84SBK L Dimensions: 84(w) x 30(d) Straight Dishtable, soiled, 84"W x 30"D, for left to right operation, 16/304 stainless steel top, 10"H boxed back splash, 20"W x 20"D x 8"deep pre rinse sink bowl with splash mount faucet holes 8" o/c, stainless steel legs & adjustable bracing, stainless steel bullet feet 1 ea Fisher Model Pre Rinse Unit, spring, 8" backsplash with elbows control valve, 16" riser, 36" hose, wall bracket, Ultra Spray /PLUS valve & add on faucet with 12" swing spout 1 ea Model 0410D Pro Bowl Sink, left end splash, 10"h stainless steel, with boxed end, 2" return to wall (LEFT) INLET OUTLET 1 1/2" 1/2" 1 3 1/2" Page 16 of 26

17 ITEM 44 DISHTABLE SORTING SHELF (2 REQ'D) John Boos Model BHS1842 TS X Dimensions: 42(w) x 18(d) Dishrack Sorting Shelf, 42" W x 18" D, wall mount, slanted, tubular, 16 gauge stainless steel, holds 2 racks, KD ITEM 45 SPARE NO. ITEM 46 DISPOSER (1 REQ'D) Salvajor Model 100 SA 3 MRSS Disposer, Sink Assembly, 3 1/2" sink collar, 1 Hp motor, start/stop push button manual reversing MRSS control, includes fixed nozzle, chrome plated vacuum breaker, solenoid valve, sink stopper & flow control, heat treated aluminum alloy housing, UL, CSA, CE (**Effective all MRSS control panel dimensions will be 9 1/4" x 10 1/4" x 5 7/16"**) 1 ea Specify voltage ELECTRICAL VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP 1 1 INLET OUTLET 1 1/2" 1 2" ITEM 47 CONDENSATE HOOD (1 REQ'D) Accurex Model CONDENSATE HOOD Hood per spec ITEM 48 DISHWASHER, DOOR TYPE (1 REQ'D) MEIKO Model DV 80.2 Dimensions: 58.44(h) x 25(w) x 29.88(d) Point 2 Series Dishwasher, door type, high temperature with built in booster, approximately 61 racks/hour capacity, 0.74 gallons/rack, front mounted MIKE controller with digital display and service diagnostics, fully automatic operation, automatic push handle cycle start, Auto Safe temperature control for guaranteed sanitization, Soft Start fine china & glassware protection system, corner or straight thru, double wall stainless steel construction, pumped drain & rinse, 1 HP wash pump, NSF, cetlus, ENERGY STAR 1 ea Freight: FOB factory freight allowed standard delivery service within the continental US 1 ea Startup + Performance & Installation inspection which activates 1 year standard warranty, contact your local MEIKO authorized service agent or MEIKO service directly at ea 1 year standard warranty: Parts, labor & travel within the continental US, no overtime charges Page 17 of 26

18 1 ea v/60/3 ph, 50.1/54.8 amps, standard VERIFY VOLTAGE 1 ea Drain water tempering kit (factory installed) ELECTRICAL VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP INLET OUTLET 1 3/4" 1 1 1/2" ITEM 48 DISHWASHER, DOOR TYPE <ALTERNATE> (1 REQ'D) Champion Model DH 2000 (40 70) Dimensions: 66.38(h) x 30.88(w) x 26(d) Versa Clean Dishwasher, door type, high temperature with built in 40 and 70 F rise electric booster, selfdraining pump, 55 racks/hour capacity, auto fill, stainless steel construction, electric tank heat, NSF, UL, 1hp, ENERGY STAR 1 ea <Alternate> 1 year limited warranty, standard 1 ea <Alternate> Complimentary factory authorized performance test included, upon equipment start up. Contact local Champion sales representative for coordination of the start up. If customer is beyond 60 miles from Champion authorized service agent, consult factory. 1 ea <Alternate> 240v/60/3 ph, 45.0 amps 1 ea <Alternate> Drain water tempering kit (mounted at factory) ELECTRICAL VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP Direct ELECTRICAL 1 REMARKS Dishwasher Voltage INLET OUTLET 1 3/4" 1 2" ITEM 49 CLEAN DISHTABLE (1 REQ'D) John Boos Model CDT6 S60SBK R Dimensions: 34(h) x 60(w) x 30(d) Dishtable, clean, straight design, 60"W x 30"D x 34"H, left to right operation, 16/300 series stainless steel top, 10"H back splash, 2 1/4"H rolled edge, stainless steel legs, adjustable stainless steel bracing & bullet feet, NSF 1 ea Model 0205B On the right ITEM 50 SPARE NO. Page 18 of 26

19 ITEM 51 PLASTIC WITH METAL FRAME SHELVING (4 REQ'D) Focus Foodservice Model FPS2448VNGN Dimensions: 48(w) x 24(d) FPS Plus Shelf, 24"W x 48"L, epoxy coated frame, with vented mat, green, NSF 4 ea Model FG086G Post, 86"H, stationary, green epoxy coated ITEM 52 THREE (3) COMPARTMENT SINK (1 REQ'D) John Boos Model 3B D18 X Dimensions: 43(h) x 87(w) x 25.5(d) Sink, (3) 16"W x 20" front to back x 14"deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45 & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3 1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1 5/8" OD stainless steel legs with 1 1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF 1 ea Fisher Model Faucet, 8" c/c backsplash mount, with 12" swing spout, elbows 3 ea Fisher Model Twist Waste Standard Valve, 3 1/2" industry standard sink opening, 2" drain outlet, basket strainer, 12 GPM drain rate, stainless steel, CSA INLET OUTLET 1 1/2" 1/2" " ITEM 52 THREE (3) COMPARTMENT SINK <ALTERNATE> (1 REQ'D) John Boos Model 3B D18 X Dimensions: 93(w) x 29.5(d) Sink, (3) 18"W x 24" front to back x 14"deep compartments, (2) 18" drainboards, 10"H boxed backsplash with 2" return to wall at 45 & 1" turned down rear lip, corners coved at 3/4" radius, bottom of bowls drain to 3 1/2" dia. die stamped opening, (1) set of faucet holes, 16/300 stainless steel, 1 5/8" OD stainless steel legs with 1 1/4" OD adjustable side bracing, stainless steel gussets, adjustable stainless steel bullet feet, NSF ITEM 53 SHELVING, WALL MOUNTED (2 REQ'D) John Boos Model EWS X Dimensions: 9.5(h) x 36(w) x 12(d) Shelf, wall mount, 12" W x 36" L, finished with stallion safety edge front, 1 1/2" turned up backsplash, (2) support brackets, 18/300 stainless steel with # 4 polish, NSF, KD (FLYER) ITEM 54 PLANETARY MIXER (1 REQ'D) Hobart Model HL600 1STD **Refurbished** 60 Quart Mixer; with bowl, beater, D whip, & spiral dough arm; US/EXP configuration Legacy Planetary Mixer, 2.7 HP, 60 quart, (4) fixed speeds, gear driven transmission, 50 Minute SmartTimer, #12 attach hub, power bowl lift, stainless steel bowl, stainless steel bowl guard, "B" beater, "D" wire whip, "ED" dough hook 1 ea Standard warranty: 1 Year parts, labor & travel time during normal working hours within the USA ELECTRICAL VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP J.B Page 19 of 26

20 ITEM 55 SPARE NO. ITEM 56 WORK TABLE, 36", STAINLESS STEEL TOP (1 REQ'D) John Boos Model ST6R5 3036SSK X Dimensions: 35.75(h) x 36(w) x 30(d) Work Table, 36"W x 30"D, 16/300 stainless steel top with 5" backsplash, Stallion safety edge front, 90 turndown on sides, 18 gauge stainless steel adjustable undershelf, stainless steel legs & bullet feet, NSF, KD (FLYER NET PRICING) 1 ea Standard flyer accessories only, NO modifications to flyer items allowed or their accessories ITEM 57 SHELVING, WALL MOUNTED (1 REQ'D) John Boos Model EWS X Dimensions: 9.5(h) x 36(w) x 12(d) Shelf, wall mount, 12" W x 36" L, finished with stallion safety edge front, 1 1/2" turned up backsplash, (2) support brackets, 18/300 stainless steel with # 4 polish, NSF, KD (FLYER) ITEM 58 WET GRINDER (1 REQ'D) Inno Concepts Model ICGC30CSG Grinder with #304 Stainless steel drum, 110v, 1 HP, Stainless steel lid. ITEM 59 WALK IN COMBINATION COOLER/FREEZER (1 REQ'D) American Panel Corporation Model Walk In Cooler/Freezer Combination (2 compartments) 11' 0" long, 7' 0" wide, 8' 8" high. 1 pr Model FJAF 0108 CFV 052 / M4FF 0056 IAA 252 Cooler Refrigeration system Freezer Refrigeration system Includes compressors, evaporator coils for each box, includes 1 year parts and labor warranty, 5 year extended compressor warranty. 2 pr Model TREADPLATE Diamond tread plate on front and back of all doors 36" high 2 ea Model LIGHT LED Light fixture in cooler section. ITEM 60 SPARE NO. Page 20 of 26

21 ITEM 61 WIRE SHELVING (16 REQ'D) Winco Model VEX 1842 Shelf, 42" x 18", wire, epoxy coat finish, NSF 4 ea Model VEX 1836 Shelf, 36" x 18", wire, epoxy coat finish, NSF 8 ea Model VEX 1830 Shelf, 30" x 18", wire, epoxy coat finish, NSF 28 ea Model VEX 86P Post, 86"H, epoxy coated 16 ea Model VC HK Hook, for shelving, S/N shaped, connects shelving units together to create straight lines or 90 angles (2 each per inner case, 200 each per master case) ITEM 62 CAN RACK (1 REQ'D) New Age Model Dimensions: 78.25(h) x 26.63(w) x 42(d) Economy First In, First Out Can Rack, 26 5/8"W x 78 1/4"H x 42"D, stationary design, holds (156) #10 cans, adjustable feet, NSF 1 ea Lifetime warranty against rust & corrosion, 1 year construction warranty, std. ITEM 63 TUBULAR SHELVING UNIT (1 REQ'D) Winholt Equipment Model ALSCS CM Dimensions: 72(h) x 48(w) x 24(d) Cooler & Backroom Shelving, tubular, 24" x 48", 4 shelves, all welded aluminum with mitered edges, 18" space between shelves, 72" high, NSF ITEM 64 WIRE SHELVING (16 REQ'D) Winco Model VEX 1836 Shelf, 36" x 18", includes (4) sleeve clips per shelf, wire, epoxy coated, green, NSF (Qty Break = 2 each) 16 ea Model VEX 86P Shelf Post, 86"H, epoxy coated, green, NSF (priced per each) ITEM 70 FURNITURE (1 REQ'D) Custom Model FURNITURE Furniture package ITEM 71 SMALLWARES (1 REQ'D) Custom Model SMALLWARES Smallwares package Page 21 of 26

22 ITEM 72 SPARE NO. ITEM 73 DISPOSER (4 REQ'D) Salvajor Model 100 SA 3 MRSS Disposer, Sink Assembly, 3 1/2" sink collar, 1 Hp motor, start/stop push button manual reversing MRSS control, includes fixed nozzle, chrome plated vacuum breaker, solenoid valve, sink stopper & flow control, heat treated aluminum alloy housing, UL, CSA, CE (**Effective all MRSS control panel dimensions will be 9 1/4" x 10 1/4" x 5 7/16"**) 4 ea 208v/60hz/1 ph, 10.2 amps ELECTRICAL VOLTS CYCLE PHASE CONN NEMA AMPS KW HP MCA MOCP Direct INLET OUTLET 1 1/2" 1 2" ITEM 74 SINGLE LEVER FAUCET (4 REQ'D) T&S Brass Model B H Faucet, single lever, deck mount, 8" centers, 3 hole, rigid base, ceramic cartridge, 48" side spray, 16" stainless steel flex hose, 2.2 GPM aerator, low lead, 1/2" NPT, ADA compliant, NSF INLET OUTLET 1 1/2" 1 ITEM 75 FABRICATION (1 REQ'D) Neilsen Sheet Metal Model CUSTOM *Allowance* Custom Stainless Steel Deity Platform, 16 GA, (3) units to have 2 bays each, (1) unit to have 1 bay. Page 22 of 26

23 ITEM 76 FREIGHT AND DELIVERY (1 REQ'D) HORIZON EQUIPMENT Model RECEIVE STORE & Receive, store and delivery to the jobsite. ITEM 77 INSTALLATION OF REFRIGERATION COMPONENTS (1 REQ'D) HORIZON EQUIPMENT Model REFRIGERATION Installation of walk in cooler/freezer refrigeration components, remote compressors, evaporator coils, permit, piping and pipe covering, refrigerant, start up and check for proper operation. 1 year service warranty. *Does not include electrical connections or any wall or roof penetrations. ITEM 78 INSTALLATION (1 REQ'D) Advanced Commercial Installations Model CUSTOM Installation includes receive and uncrate all food service equipment items including walk in, as listed in this quotation and as by the FSEC (food service equipment contractor), deliver and set in place to jobsite, hang and/or install said items as per code requirements, silicone, clean, remove plastic laser film on s/s items and dispose of packing materials into contractor supplied dumpster, start up equipment after all mechanical connections (by others) are made and gas lines have been bled. * Note: Final mechanical, plumbing and electrical connections and installation of all exhaust hoods are by others. GENERAL TERMS & CONDITIONS 1.General. The sale by SELLER (as defined on the front of this document) of any products or services to Purchaser shall be subject to the following terms and conditions, and the terms and conditions stated on the face page of the Seller s Conditional Sales Contract to which these terms and conditions are attached or on any Seller invoice accompanying the products or services sold by Seller (the Terms and Conditions ). THIS CONTRACT CONSTITUTES THE ENTIRE AGREEMENT BETWEEEN PURCHASER AND SELLER WITH RESPECT TO THE GOODS AND SERVICES FURNISHED BY SELLER. NO REPRESENTATION, PROMISE OR CONDITION NOT SET FORTH HEREIN HAS BEEN RELIED UPON BY PURCHASER OR SHALL BE BINDING ON EITHER PARTY HERETO. 2. Other Documents. These Terms and Conditions are in lieu of and replace any and all terms and conditions set forth in any documents issued by Purchaser. AND ADDITIONAL, DIFFERENT, OR CONFLICTING TERMS AND CONDITIONS ON ANY SUCH DOCUMENT ISSUED BY PURCHASER AT ANY TIME ARE HEREBY OBJECTED TO AND REJECTED BY SELLER, SHALL BE WHOLLY INAPPLICABLE TO ANY SALE MADE HEREUNDER AND SHALL NOT BE BINDING IN ANY WAY ON SELLER. No waiver or amendment to these Terms and Conditions shall be binding on Seller unless made in a writing expressly stating that it is such a waiver or amendment and signed by Seller. 3. Contract of Sale. Any quotation given by Seller to Purchaser will be valid for the period stated on the Quotation, and if no period is stated, the Quotation is valid for 30 days from the date of the Quotation. All offers to purchase, and orders of Purchaser are subject to final acceptance by, and are not binding upon Seller until accepted by an authorized officer of Seller at its offices in Eagan, MN. Orders accepted by Seller are not subject to cancellation by Purchaser without the written consent of Seller. 4. Payment Terms. Terms of payment are within Seller s sole discretion and, unless credit terms are otherwise agreed to by Seller, payment must be received by Seller prior to delivery of products or upon performance of services by Seller. Unless otherwise stated, all prices will be stated, and all payments must be made in U.S. Dollars. If credit terms have been agreed to by Seller, invoices are due and payable within thirty (30) days after the date of the invoice unless otherwise noted on the face page of the Purchase Order or Quotation or on Seller s invoice. Seller may invoice parts of an order separately. Purchaser agrees to pay interest on all pastdue sums at the lesser of 1.5% per month or the highest rate allowed by law, and to pay all costs of collection, including costs of litigation and reasonable attorney s fees incurred by Seller. Page 23 of 26

24 5. Security Interest. If goods or products are sold to Purchaser on credit, Purchaser hereby grants Seller a purchase money security interest in such goods and products, and in all attachments, accessories, improvements, replacements and proceeds, including insurance proceeds, resulting from any sale, assignment or other conveyance, or damage or destruction thereof (collectively, the Collateral ), as security for the payment of all indebtedness of Purchaser to Seller. Purchaser further authorizes Seller to file one or more financing statements with such governmental offices as Seller deems appropriate naming Purchaser as Debtor and Seller as Secured Party describing the Collateral, or to note the security interest on any certificate of title evidencing ownership of the products. Seller shall have all the rights and remedies of a secured party under the Minnesota Uniform Commercial Code which rights and remedies, to the extent permitted by law, shall be cumulative. 6. Delivery Schedules. Stated Seller delivery schedules or dates are estimates only and not a commitment as to delivery on specific dates. 7. Shipping and Delivery. All shipments are made FOB Seller s shipping point, unless otherwise noted. If the contract requires delivery of the goods to the purchase, delivery shall take place when physical possession of the Goods in given to the Purchaser or to a carrier for shipment to the Purchaser whichever comes first. Purchaser authorizes Seller to deliver the Goods in installments as they become available for delivery. Unless otherwise noted, sales prices do not include freight, shipping or handling charges. Separate charges for freight, shipping and handling will be shown on Seller s invoice(s). The Purchaser must make all claims for breakage, loss, delay and damage to the carrier. In the absences of directions, goods will be shipped by the method and via a carrier that the Seller believes dependable. 8. Title and Risk of Loss. Title and risk of loss and responsibility for the products shall pass to Purchaser upon delivery as provided in Section 6 above. 9. Taxes. Unless otherwise indicated, sales prices do not include, and Purchaser is responsible for and agrees to pay (unless Purchaser shall provide Seller at the time an order is submitted with exemption certificate or other documents acceptable to taxing or customer authorities), all sales, use value added, exercise and all other federal, state or local or foreign taxes, import or customs fees and duties associated with an order, however designated, except for Seller s franchise taxes and taxes on Seller s net income. If applicable, a separate charge for taxes will be shown on Seller s invoice. 10. Maintenance and Repairs. So long as Seller retains a security interest in the Goods, Purchaser agrees to maintain the Goods in good repair and not to permit the same to be removed from its possession or to be attached, levied upon or assessed against, not to permit any lien, encumbrance or adverse claim of any kind to be made against the Goods and to pay all taxes and indebtedness of every kind levied or assessed against the Goods or in connection with this Agreement. If Purchaser fails to maintain the Goods or fails to do any of the other things required of it under this Agreement, then Seller may, at its option, pay or do the same, and any money so paid by Seller shall be added to the mount due Seller and shall be repayable to Seller by Purchaser immediately upon demand by Seller, together with interest as provided in Section 4 above. 11. Returns. No returns will be accepted without prior written authorization of the Seller. Returns are subject to a 30% restocking charge. Purchaser shall be responsible for the cost of freight to return products. Notwithstanding the foregoing, no returns are permitted with respect to custom design and fabricated equipment and furniture. 12. LIMITED WARRANTY AND DISCLAIMER OF ADDITIONAL WARRANTY. ALL GOODS AND SERVICES ARE SOLD BY SELLER AS IS AND SELLER SPECIFICALLY DISCLAIMS, ANY AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR USAGE OF TRADE. This provision does not affect warranties that may be provided by the manufacturer of the Goods. If there is a manufacturer s warranty with respect to Goods acquired by Purchaser from Seller, Seller is not a party to it and such warranty is between the manufacturer and Purchaser. Page 24 of 26

25 13. LIMITATION OF LIABILITY; EXCLUSTION OF CONSEQUENTIAL DAMAGES. SELLER S TOTAL LIABILITY FOR ALL CLAIMS OF ANY KIND, INCLUDING WITHOUT LIMITATION BREACH OF WARRANTY OR OTHER BREACH OF CONTRACT, NEGLIGENCE AND STRICT LIABILITY IN TORT, FOR LOSS OR DAMAGE ARISING OUT OF, CONNECTED WITH OR RESULTING FROM GOODS BY SELLER, OR THE PURCHASE USEOR PERFORMANCE OF THE GOODS SHALL IN NO EVENT EXCEED THE PURCHASE PRICE PAID FOR SUCH GOODS. IN ADDITION, IN NO EVENT SHALL SELLER BE LIABLE TO PURCHASER OR THIRD PARTIES FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION LOSS OR PROFITS OR REVENUE, LOSS OF USE OF THE GOODS, COST OF CAPITAL OR CLAIMS BY PURCHASER, PURCHASER S CUSTOMERS OR OTHER THIRD PARTIES FOR DAMAGES RESULTING FROM PROPERTY DAMAGES OR PERSONAL INJURY. No Liability whatever shall attach to Seller if Seller has not received complete payment for Goods or services provided by Seller. The failure of any of the Goods purchased by the Purchaser to fulfill any applicable warranty shall not affect the liability of Purchaser to Seller with respect to any such Goods or obligation of Purchaser to Seller. Seller shall make commercially reasonable efforts to assist Purchaser in obtaining proper adjustments under any applicable manufacturer s warranty. The foregoing is intended as a complete allocation of the risk between the parties. Because the bargain struck and the price paid reflect such allocation this limitation upon remedies will not have failed of its essential purpose. Some states do not allow the exclusion or limitation of incidental or consequential damages. 14. Default. If Purchaser fails to pay when due any amounts owing Seller, or to perform any other obligation to Seller hereunder or otherwise, or if Purchaser admits in writing its inability to pay its debts generally as they become due or if Purchaser becomes insolvent, makes an assignment or liquidation proceedings, or actual or constructive rejection by a bankruptcy trustee, or if there shall be instituted by or against Purchaser any proceeding for the appointment of a receiver from any Purchaser s Property, or if Seller reasonably believes that Purchaser is unable to meet its debts as they become due, then Seller may, in addition to all other rights, declare any amounts due Seller to be immediately due and payable. In addition, Seller may, upon notice to Purchaser at any time, terminate all of Seller s obligation under this or any other agreement with Purchaser. 15. Waiver. The failure of Seller to insist upon performance of any provision in this contract shall not be construed as waiving the provision and it shall remain in effect. 16. Notices. All notices required or permitted in this Agreement shall be in writing and sent by certified U.S. mail, postage prepaid, to Seller or Purchaser at the address stated on the face page of this contract or to the address as either party may from time to time advise in writing. 17. Modification. No modification or amendment of this Agreement shall be effective unless written on the Agreement and initialed by Seller s Authorized representative or contained in separate writing signed by Purchaser and Seller s authorized representative. Other statements or actions by sales people or others shall not be valid unless and until so written and accepted as required. 18. Attorney s Fees. In any action or suit arising out of this Agreement, the losing party shall pay to the prevailing party reasonable attorney s fees and all other costs and expenses. 19. Force Majeure. Seller shall not be liable for any delay in performance directly or indirectly caused by or resulting from acts of nature, fire, flood, accident, riot, war, government intervention, embargoes, strikes, labor difficulties, equipment failure, late deliveries by suppliers or manufacturers or other difficulties which are beyond the control and without the fault or gross negligence of Seller. 20. Governmental Regulations. Any order accepted by the Seller is at all times subject to Governmental proclamations, laws and regulations now or hereafter in effect, pertaining to priorities, allocations, prices and other such acts affection this transaction or the production or sales by manufacturers of the products. 21. Governing Law. All sales will be governed by the laws of the state of Minnesota, without regard to its conflict of law provisions. Purchaser consents and agrees to submit to the exclusive jurisdiction of the state and federal courts located in Dakota County, the state of Minnesota, concerning this sale, and all claims, questions or controversies arising out of this sale and these Terms and Conditions. Any claim brought against Seller by Purchaser must be brought within one year of the date of delivery as provided in Section Severability. These Terms and Conditions shall be deemed severable. In the event that any provision is determined to be unenforceable or invalid, such provision shall nonetheless be enforced to the fullest extent permitted by applicable law, and such determination shall not affect the validity and enforceability of any other remaining provisions. Page 25 of 26

26 23. Check Conversion. When you provide a check as a payment, you authorize us either to use information from your check to make a one time electronic fund transfer from your account or to process the payment as a check transaction. When we use information from your check to make an electronic fund transfer, funds may be withdrawn from your account as soon as the same day we receive your payment, and you will not receive your check back from your financial institution. 24. Miscellaneous. These Terms and Conditions, together with terms and conditions set forth on the face page of the conditional sales contract or in the Seller s invoices to Purchaser (a) contain the entire agreement between Seller and Purchaser relating to this sale, and expressly supersede and replace any prior or contemporaneous agreements, whether written or oral, relating to said sale, including any terms and conditions on any of Purchaser s documents or purchase orders, (b) shall be binding upon and inure to the benefit of the heirs, successors and permitted assigns of the parties. The paragraph headings contained herein are for the convenience of reference only and shall not be construed so as to affect the interpretation or construction of any substantive provision hereof. 25. Other Fees, Collection Costs and Attorney Fees. I agree that I will be liable to for any additional charges reasonably expended by Horizon or its affiliates in perfecting its secured position. In any event, subject to applicable law, I agree to pay 18% on all sums due, all costs of collection, including reasonable attorney fees and legal expenses, if the obligation to Horizon Foodservice Equipment is not paid on time. 26. Integrated Agreement. It is intended this is the complete agreement and any modification written agreement signed by both parties. Revised 04/2015 Page 26 of 26