TECHNICAL DATASHEETS
|
|
- Cornelius Newman
- 5 years ago
- Views:
Transcription
1 TECHNICL DTSHEETS Uni 8 lways read and follow the warnings and instructions for use Copyright Capital Safety Systems Ltd 2013 THE ULTIMTE IN FLL PROTECTION
2 Contents Uni 8 Technical Datasheets Contents 2 Component Selection Guidelines 3 Component Properties Typical Uni 8 System Typical Uni 8 evolution System Uni 8 8mm Hex Swage Toggle Uni 8 8mm Hex Swage Joiner Uni 8 Intermediate racket Uni 8 Variable racket Uni 8 Straight Eye Uni 8 evolution Intermediate racket Uni 8 evolution Short Curve Uni 8 evolution Curve mm 7x7 SS Cable /M Uni 8 45 SS Wire Corner Uni 8 90 SS Wire Corner Uni 8 Rigid 90 Corner Uni 8 Rigid 45 Corner mm UniGrab & Carabiner Uni 8 evolution Traveller Uni 8 evolution Triple rticulated nchorage Point Uni 8 evolution Mono ttachment nchorage Point Uni 8 Wall Fixing Plate Uni 8 Energy bsorber Uni 8 evolution Energy bsorber Uni 8 8mm Hex Swage Tensioner 0.8kN Uni 8 rm Pack Uni 8 System Tag Tools List 30 Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 2
3 Component Selection Guidelines Uni 8 Technical Datasheets RULES 1. ONLY 8mm, 7x7 Stainless Steel Cable ( ) can be used with the Uni 8 & Uni 8 evolution System. 2. Systems designed with the Uni 8 evolution Intermediate, Curve & Short Curve brackets ( , & ) can ONLY be used with Uni 8 evolution Traveller ( ). 3. Uni 8 evolution Traveller ( ) IS compatible with all Uni-8 Components. 4. Uni 8 evolution Intermediate and Corner brackets ( , & ) can ONLY be used with Uni 8 evolution Traveller ( ). 5. It is Recommended that Uni 8 Cable guides ( , , & ) & Uni 8 evolution rackets ( , & ) are not mixed within a single system for aesthetic reasons ONLY. 6. Uni 8 evolution Mono & triple ttachment anchorage points ( , ) can ONLY be used with the Uni 8 evolution Energy bsorber ( ). Uni 8 evolution Traveller Uni 8 Unigrab Uni 8 Intermediate racket Uni 8 45 SS Wire Corner (for use with ) Uni 8 90 SS Wire Corner (for use with ) Uni 8 evolution Intermediate Uni 8 evolution Curve Uni 8 evolution Short Curve Uni 8 evolution Energy bsorber* Uni 8 Energy bsorber Uni 8 Tensioner Uni 8 evolution Triple rticulated anchorage point Uni 8 evolution Mono ttachment anchorage Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 23
4 Uni 8 Component Properties Uni 8 Technical Datasheets Capacity (kg) No. Users ctivation Force (kn) Max deployment length (mm) reaking strength (kn) Torque load (N/m) Weight (kg) Operating temp range ( C) life (yrs.) Normal environment ngle ( ) Max Min Max Min vertical (±) UniGrab Uni 8 evolution Traveller mm Hex Swage Toggle Uni 8 Tensioner Uni 8 evolution Intermediate Uni 8 evolution Curve Uni 8 evolution Short Curve Uni 8 evolution Energy bsorber Uni 8 evolution Triple rticulated anchorage point Uni 8 evolution Mono ttachment anchorage Uni 8 8mm Hex Joiner Uni 8 Wall Fixing plate Uni 8 Straight eye > Uni 8 Energy bsorber Uni 8 Intermediate racket Uni 8 Variable bracket Customisable 15 8mm, 7 x 7 Stainless steel Cable Uni 8 45 SS Wire Corner Uni 8 90 SS Wire Corner per m * * * Only Tested as part of a system and was not the limiting component Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 24
5 TM Technical Datasheet: 1327 Typical Uni 8 System GI GH H I F E D C Uni 8 Wall Fixing Plate ( ) OSH , Subpart M and EN 795:1996 Uni 8 Energy bsorber ( ) C 8mm Hex Swage Toggle ( ) D 8mm, 7 x 7 Stainless Steel Cable ( ) E Uni 8 Intermediate racket ( ) F UniGrab & Carabiner ( ) G Uni 8 8mm Hex Swage Tensioner 0.8kN ( ) H Uni 8 Straight Eye ( ) I Uni 8 90 SS Wire Corner ( ) SYSTEM SPECIFICTION CONFORMITY EN 795 Class C, OSH Compliant, S/NZS Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 25
6 Technical Datasheet: 1328 Typical Uni 8 evolution System N D D E GF GJ CL M K D 8mm, 7 x 7 Stainless Steel Cable ( ) G Uni 8 Hex Swage Tensioner 0.8kN ( ) J Uni 8 evolution Triple ttachement nchorage ( ) K Uni 8 evolution Energy bsorber ( ) L Uni 8 evolution Intermediate racket ( ) M Uni 8 evolution Traveller ( ) N Uni 8 evolution Curve ( ) SYSTEM SPECIFICTION CONFORMITY EN 795 Class C, OSH Compliant, S/NZS Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 26
7 Technical Datasheet: 0906 Uni 8 8mm Hex Swage Toggle Part No: mm (1.10 ) 30mm (1.18 ) 18mm (0.71 ) Ø12.7mm (0.5 ) 82mm (3.23 ) 179mm (7.05 ) PPLICTION 12.5mm (0.63 ) efore Swaging Used to hold the cable fi rmly in place at one end of the system. For use with 8mm 1x19 or 7x7 wire only. Refer to installation instructions for information on assembly and installation. 19kN max permitted arrest load, min break strength 38kN. COMPONENT SPECIFICTION MTERIL QULITY 316 Stainless Steel Natural 0.33kg (0.73 lbs) Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 27
8 Technical Datasheet: 0917 Uni 8 8mm Hex Swage Joiner Part No: mm (3.11 ) 190mm (7.48 ) before swaging 200mm (7.87 ) after swaging 8mm 1x19 or 7x7 Stainless Steel Cable* Uni 8 8mm Hex Swage Joiner *Order Separately. PPLICTION Used to join two sections of cable together. For use with 8mm 1x19 or 7x7 wire only. Refer to installation instructions for information on assembly and installation. 19kN max permitted cable tension, min break strength 38kN. COMPONENT SPECIFICTION MTERIL QULITY 316 Stainless Steel Natural 0.12kg (0.73 lbs) Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 28
9 Technical Datasheet: 909 Uni 8 Intermediate racket Part No: C D 80mm (3.2 ) Ø9mm M8 Nylon Shear Pin M8x SS Fixing 107.5mm (4.2 ) C racket rm D Carrier PPLICTION The Uni 8 intermediate bracket is designed to allow system installation in a variety of positions. The bracket can be mounted on solid posts or structures with consideration given to isolation methods to prevent cross contamination where necessary. Minimum grade 470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm. COMPONENT SPECIFICTION C D MTERIL Nylon 316 Stainless Steel 316 Stainless Steel 316 Stainless Steel Natural Natural Electropolished Electropolished 0.44kg (0.98 lbs) QULITY Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 29
10 Technical Datasheet: 924 Uni 8 Variable racket Part No: Ø9mm 79.5mm (3.1 ) 107.5mm (4.2 ) 60mm (2.4 ) 420mm (16.5 ) PPLICTION For use on pitched roof systems when the Uni 8 system is required to cross a ridge or follow a hip type corner. Minimum grade 470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm. COMPONENT SPECIFICTION MTERIL QULITY 316 Stainless Steel Electropolished 0.615kg (1.36 lbs) Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 10 2
11 Technical Datasheet: 1315 Uni 8 Straight Eye Part No: Direction 58.6mm (2.3 ) 16.5mm (0.65 ) Direction C Direction 49mm (2 ) 80mm (3.15 ) 5mm (0.2 ) R11 55mm (2.2 ) PPLICTION The Uni 8 Straight Eye is designed as a multipurpose end anchor for wall and overhead horizontal systems. Minimum breaking strength greater than 45kN Safe to load in direction &. DO NOT LOD IN DIRECTION C COMPONENT SPECIFICTION MTERIL QULITY 316 Stainless Steel Electropolished 0.35kg (12.35 oz) Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 11 2
12 Technical Datasheet: 1295 Uni 8 evolution Intermediate racket Part No: C 150mm (5.9 ) Ø9mm (0.35 ) 32mm (1.26 ) 72mm (2.83 ) 64mm (2.52 ) C ody Cable Guide Protection Cover PPLICTION The Uni 8 evolution intermediate bracket can be mounted onto a variety of structures, with consideration given to isolation methods to prevent cross contamination where necessary. Minimum grade 470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm. RED COMPONENT SELECTION GUIDELINES COMPONENT SPECIFICTION C MTERIL 316 Stainless Steel nti-uv Polyamide nti-uv Polyamide Electropolished Natural Natural 0.21kg (0.46 lbs) QULITY Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 12 2
13 Technical Datasheet: 1298 Uni 8 evolution Short Curve Part No: D C 250mm (9.84 ) Ø9mm (0.35 ) 76mm (2.99 ) 44mm (1.73 ) 64mm (2.52 ) 77mm (3.03 ) C D ody Cable Guide Curve Reinforcement Protection Cover PPLICTION The Uni 8 evolution intermediate bracket can be mounted onto a variety of structures, with consideration given to isolation methods to prevent cross contamination where necessary. Minimum grade 470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm. RED COMPONENT SELECTION GUIDELINES COMPONENT SPECIFICTION C D MTERIL 304 Stainless Steel nti-uv Polyamide 304 Stainless Steel nti-uv Polyamide Electropolished Natural Electropolished Natural 0.4kg (0.9 lbs) QULITY Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 13 2
14 Technical Datasheet: 1301 Uni 8 evolution Curve Part No: C D 480mm (18.9 ) 85mm (3.35 ) C D ody Curve Reinforcement Flexible Cable Guide Protection Cover PPLICTION The Uni 8 evolution curve is capable of forming curves ranging from 45 to 90 degrees so that the lifeline can be adjusted to the needs of each installation. Minimum grade 470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm. RED COMPONENT SELECTION GUIDELINES COMPONENT SPECIFICTION C D MTERIL 304 Stainless Steel 304 Stainless Steel nti-uv Polyamide nti-uv Polyamide Electropolished Electropolished Natural Natural 0.7kg (1.54 lbs) QULITY Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 14 2
15 Technical Datasheet: mm 7x7 SS Cable /M Part No: Ø8mm PPLICTION For use in RoofSafe Cable and Uni 8 horizontal applications. Minimum reak Strength 38.7kN (8700.1lbf) Note: Can also be purchased on a 1000m drum ( ft) (Part Number: ) COMPONENT SPECIFICTION MTERIL 316 Stainless Steel Natural 0.27kg /M QULITY. 100% Molybdenum Tested Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 15 2
16 Technical Datasheet: 911 Uni 8 45 SS Wire Corner Part No: R206mm R200mm 10mm (0.39 ) 0.5mm mm (1.12 ) Straight Length O/D 12mm I/D 9mm 165mm (6.5 ) 109mm (4.29 ) PPLICTION: To be used in conjunction with Uni 8 intermediate brackets ( ) to form a 45 corner in the orientation required. Minimum grade 470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm. COMPONENT SPECIFICTION MTERIL QULITY 316 Stainless Steel Electropolished 0.08kg (0.18 lbs). Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 16 2
17 Technical Datasheet: 910 Uni 8 90 SS Wire Corner Part No: R206mm R200mm 10mm (0.39 ) 0.5mm mm (1.12 ) Straight Length O/D Ø12mm I/D Ø9mm PPLICTION To be used in conjunction with Uni 8 intermediate brackets ( ) to form a 90 corner in the orientation required. Minimum grade 470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm. COMPONENT SPECIFICTION MTERIL QULITY 316 Stainless Steel Electropolished 0.15kg (0.33 lbs). Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 17 2
18 Technical Datasheet: 916 Uni 8 Rigid 90 Corner Part No: Ø16.5mm 60mm(2.36 ) 111.5mm (4.2 ) 300mm (11.8 ) PPLICTION Used for fl oor mounting or with the use on rigid posts. CN NOT be used in conjunction with RoofSafe posts. For shock absorption element use with inline absorbers. (Part Number ) Minimum grade 470 M16 fastening should be used to fi x bracket to structure or rigid posts at a recommended torque of 50 Nm. COMPONENT SPECIFICTION MTERIL QULITY 316 Stainless Steel Polished 1.5kg (3.3 lbs). Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 18 2
19 Technical Datasheet: 926 Uni 8 Rigid 45 Corner Part No: Ø16.5mm 60mm(2.36 ) 111.5mm (4.2 ) 300mm (11.8 ) PPLICTION Used for Floor mounting or with the use of rigid posts. CN NOT be used in conjunction with RoofSafe posts. For shock absorption element use with Inline absorbers ( ) Minimum grade 470 M16 fastening should be used to fi x bracket to structure or rigid posts at a recommended torque of 50 Nm. COMPONENT SPECIFICTION MTERIL QULITY 316 Stainless Steel Electropolished 1.5kg (3.25 lbs) Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 19 2
20 Technical Datasheet: mm UniGrab & Carabiner Part No: mm (2.36 ) 63mm (2.48 ) 26mm (1.02 ) Ø15.5mm (0.61 ) UniGrab mm ( ) Carabiner PPLICTION For use as an attachment device for a single user in conjuction with the Uni 8 and RoofSafe Cable systems. Note: Maximum user weight 136kg. Only to be used with carabiner provided. To prolong the life of the product, do not leave on the system when not in use. COMPONENT SPECIFICTION MTERIL 316 Stainless Steel Silver Electropolished Silver Zinc Passivate 0.42kg (0.93 lbs)) QULITY 100% Visual, alignment and interface checks Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 20 2
21 Technical Datasheet: 1308 Uni 8 evolution Traveller Part No: D 27mm (1.12 ) C C D nchorage Ring ody Friction Reducing Rollers Plastic Parts PPLICTION The Uni 8 evolution Traveller is the interconnecting element between the user and the lifeline. utomatic pass through over intermediate brackets and curves means that the user can stay connected to the lifeline permanently. RED COMPONENT SELECTION GUIDELINES COMPONENT SPECIFICTION C D MTERIL luminium T6 316L Stainless Steel Polyamide nti-uv Polyamide Natural 0.63kg (1.4 lbs) QULITY Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 21 2
22 Technical Datasheet: 1306 Uni 8 evolution Triple rticulated nchorage Point Part No: mm (5 ) 110mm (4.33 ) Ø13.5mm (0.53 ) Direction M12 olt Direction Direction Direction C Direction C 62mm (2.52 ) 84mm (3.3 ) 150mm (5.9 ) ody Plate PPLICTION The Uni 8 evolution articulated anchorage point is used to set up lifeline anchorage points. The multi-directional articulation of the anchorage point means that it can be incorporated into every confi guration (wall, fl oor or overhead) dealing with solicitation (shearing or tearing). reaking strength: 37kN (8200lbs). Minimum grade 470 M12 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm. Safe to load in direction &. DO NOT LOD IN DIRECTION C RED COMPONENT SELECTION GUIDELINES COMPONENT SPECIFICTION MTERIL QULITY 316 Stainless Steel Electropolished 1.6kg (3.5 lbs) Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 22 2
23 Technical Datasheet: 1307 Uni 8 evolution Mono ttachment nchorage Point Part No: mm (1.12 ) Ø12.1mm (0.48 ) 62mm (2.44 ) Direction Direction Direction Direction C Direction C ody M12 Fastener PPLICTION The Uni 8 evolution mono-attachment anchorage is the simplest solution for installing lifeline anchorage points. Can only be used where the structure is strong enough to take the single load point such as structural steel work and concrete over 100mm Minimum grade 470 M16 fastening should be used to fi x bracket to structure at a recommended torque of 50 Nm. Safe to load in direction &. DO NOT LOD IN DIRECTION C RED COMPONENT SELECTION GUIDELINES COMPONENT SPECIFICTION MTERIL QULITY 316 Stainless Steel Electropolished 0.7kg (1.6 lbs) Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 23 2
24 Technical Datasheet: 0840 Uni 8 Wall Fixing Plate Part No: mm (2.95 ) 12mm (0.47 ) 42mm (1.65 ) 250mm (9.84 ) Ø13mm (0.51 ) M16 Thread Direction Direction PPLICTION For use in conjuction with the Uni 8 straight eye or other anchor points to spread the load back to the structure. Recommended olts - M (minimum grade) Minimum breaking strength 41.65kN ( lbf) Static strength of wall plate in: Direction - 53kN - Direction - 54kN COMPONENT SPECIFICTION MTERIL QULITY 316 Stainless Steel Electropolished 1.79kg (3.95 lbs) Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 24 2
25 Technical Datasheet: 866 Uni 8 Energy bsorber Part No: Ø13mm 65mm (2.56 ) TM mm (9.64 ) Ø12mm 4mm (0.16 ) OSH , Subpart M and EN 795:1996 PPLICTION For use in Uni 8 & Uni 8 overhead systems to reduce loading generated in a fall arrest situation. Reduces maximum fall arrest load by up to 4.5 kn (minimum system load will not fall bellow 7.5kN). N.. When calculating the minimum ground clearance for systems using Inline energy absorbers, be sure to consult Uni 8 calculation software. In systems with corners two inline energy absorbers maybe required. COMPONENT SPECIFICTION MTERIL QULITY 316 Stainless Steel Electropolished 1.11kg (2.45 lbs) Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 25 2
26 Technical Datasheet: 1304 Uni 8 evolution Energy bsorber Part No: mm (23.15 ) 142mm (5.59 ) R70 80mm (3.14 ) PPLICTION RED COMPONENT SELECTION GUIDELINES The Uni 8 evolution energy absorber is installed at the end of the lifeline, of which limits the forces at the anchor points to protect the accomodating structure. reaking strength: 37 kn (8200 lbs). bsorption threshold 10kN (880 lbf). bsorption travel: MX 800mm (2ft 7.5inches). When calculating the minimum ground clearance for systems using Uni 8 evolution energy absorbers, be sure to consult evolution calculation software. In systems with corners two inline energy absorbers maybe required. COMPONENT SPECIFICTION MTERIL QULITY Housing: nti-uv polyamide. Internals: 304 Stainless Steel. bsorbing Elements: ronze, 304 Stainless Steel Natural / Electropolished 5.2kg (11.5 lbs) Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 26 2
27 Technical Datasheet: 1313 Uni 8 8mm Hex Swage Tensioner 0.8kN Part No: D C 400mm (15.75 ) E Clevis Pin Cotter Pin C D Tension Indicator Disc Lock Nut F E Turn uckle F Lock Nut G G Stud PPLICTION The Uni 8 tensioner unit is attached to the anchor point using the clevis pin and split pin. It is used to set the tension of the cable in horizontal applications. Refer to installation instructions for information on assembly and installation. For use with 8mm 1x19 or 7x7 wire only. 19kN max permitted cable tension, min break strength 38kN. COMPONENT SPECIFICTION MTERIL QULITY 316 Stainless Steel Natural / Electropolished 0.85kg (1.87 lbs) Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 27 2
28 Technical Datasheet: 1320 Uni 8 rm Pack Part No: PPLICTION Works in conjunction with an intermediate bracket ( ) as a guide for the system cable to feed through strengthening the cable over a larger span. COMPONENT SPECIFICTION MTERIL 316 Stainless Steel Nylon Electropolished Natural 0.14kg QULITY Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 28 2
29 Technical Datasheet: 1329 Uni 8 System Tag Part No: TM EN795:1996 Class C OSH COMPLINT S/NZS Installation Date / Installatiedatum / Fecha de instalación / Montagedatum /Date d installation / Data da instalação / Data installazione / Installationsdatum Installed y / Geïnstalleerd door / Instalado Por / Montiert durch / Installateur / Instalado por / Installato da / Installerad av Contact Number / Contactnr. / Tel. de contacto / Kontakttelefon / Téléphone / Nº de Contacto / Numero contatto / Kontaktnummer Min. Ground Clearance (m) / Min. vrije valruimte (m) / Distancia minima hasta el suelo (m) / Mindestabstand zum oden (m) / Hauteur libre minimale (m) / ltura mínima livre (mt) / Distanza libera minima da terra (m) / Min. höjd ovanför marken 90mm (3.54 ) Max. Users Per System / Max. aantal gebruikers per systeem / Máximo de usuarios por sistema / Maximale enutzer pro System / Nombre maximal d utilisateurs par système / Nº máximo de utilizadores por linha / N. utenti max. per sistema / Max. användare per system Max. Users Per Span / Max. aantal gebruikers per overspanning / Máximo de usuarios por vano / Höchstzahl der enutzer pro Spannweite / Nombre maximal d utilisateurs par portée / Nº máximo de utilizadores por vão / N. utenti max. per sezione / Max. användare per skena Next Service Date / Datum volgende keuring / Próxima fecha de revisión / Termin der nächsten Wartung / Prochaine date d entretien / Data da próxima Inspecção / Data prossima manutenzione / Nästa servicedatum II 2 G c IIC T3 System Serial No. / Serienummer / Número de serie del sistema / Seriennummer des Systems / Numéro de série / Nº de série do sistema / N. di serie sistema / Systemets serienr. Use Energy bsorbing Lanyards / Gebruik energie-absorberende verbindingslijnen / Utilice acolladores de absorción de energía / Verwenden Sie falldämpfende Sicherheits-/nschlagseile / Utilisez des longes à absorption d énergie / Usar cordas com amortecedor de energia / Utilizzare funi ad assorbimento d energia / nvänd energiupptagande taljerep 2013 INTERTEK ITS10TEX Merse Road North Moons Moat Redditch Worcestershire 98 9HL Technical File No Capital Safety Group mm (8.45 ) PPLICTION For use on all Uni 8 and Uni 8 Overhead systems. (Languages: English, Spanish, Dutch, German, Portugese, Italian and Swedish). Must be attached in a visible location near the start of the system. It is completed by the installer with essential information fro the user. COMPONENT SPECIFICTION MTERIL luminium 5005 nodised. Screen printed at low temperature baked. 9g (0.32oz) QULITY Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 29 2
30 Technical Datasheet: 1323 Tools List Hex Swager c/w Die Set Hex Swage without Die Set Wire Cutters Hex Swage Die Set 10mm Wire Cable Grip mm Cable Tester Kit Eyebolt Tester Kit mm Cable/eyebolt Tester Issue Date: 01/05/13 30/06/06 Issue No: 1 Page Page 1 of 30 2
31 EUROPE, MIDDLE EST & FRIC France Le roc Center Z.I. 1re venue P Carros Le roc Cedex FRNCE t: +33 (0) f: +33 (0) United Kingdom 5a Merse Road North Moons Moat Redditch, Worcestershire 98 9HL UK t: +44 (0) f: +44 (0) Dubai ME ranch Offi ce PO ox JFZ, Dubai U..E t: f: +33 (0) Germany Hagener Strasse 44, D-57489, Drolshagen, Germany t: +49 (0) f: +33 (0) GLOL LEDER IN FLL PROTECTION Capital Safety is one of the world s leading manufacturers of fall protection and rescue equipment, with decades of experience and a legacy of innovation. We understand the industries we serve and listen to the workers in the field. We employ the best engineers to create innovative solutions and patent the products that keep workers safe at heights around the world. Capital Safety has the best quality and largest range of fall protection products in the industry. ut we re more than a product company. We take an innovative approach in bringing our products to the field. We have created international partnerships and a vast network of authorized distributors, certified installers and service centres. We offer on-site and in-house training. Look for complete solutions in our extensive line of DI-SL and Protecta products. CUSTOMER SERVICES information@capitalsafety.com ll rights reserved. The material contained herein is copyrighted; no part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic, mechanical, photocopying, recording or otherwise without prior written permission from Capital Safety.
FALL PROTECTION WITH FREEDOM
UNI 8 HORIZONTAL LIFELINE CABLE FALL PROTECTION WITH FREEDOM ROBUST FUNCTIONAL DISCREET THE ULTIMATE IN FALL PROTECTION Product BROCHURE UNI 8 HORIZONTAL LIFELINE CABLE FALL PROTECTION SYSTEM FOR WORK
More informationPersonal protective equipment against falls from a height Energy absorbers
BRITISH STANDARD BS EN 355:2002 CONFIRMED DECEMBER 2007 Personal protective equipment against falls from a height Energy absorbers The European Standard EN 355:2002 has the status of a British Standard
More informationTechnical Data. to the physical properties of
Worldwide ontacts www.tyco-fire.com G-FIRE Figure 579 d Rigid oupling 2 Inch to 8 Inch (N50 to N200) General escription he GRINNELL G-FIRE Figure 579 d Rigid ouplings provide a rigid joint by firmly gripping
More informationPARTS LIST. CoverPro 900CP & 1000CP
PARTS LIST CoverPro 900CP & 00CP 1 5 2 7 9 3 6 11 20 23 12 13 1 19 21 2 26 17 16 1 22 15 25 1 No. Part number Description 1 79560300 Face cover unit 2 79501600 Face cover 3 0602006 Thread cutter unit 000115700
More informationRAUBIOXON PLUS AND RAUBIOFLEX ADVANCED AERATOR SYSTEMS. Construction Automotive Industry
RAUBIOXON PLUS AND RAUBIOFLEX ADVANCED AERATOR SYSTEMS www.rehau.com.sg/wastewater Construction Automotive Industry UNLIMITED POLYMER SOLUTIONS LIVE BETTER WITH REHAU QUALITY AND INNOVATION REHAU TODAY
More informationTechnical Data. to the physical properties of
Worldwide ontacts www.tyco-fire.com G-FIRE Figure 579 d Rigid oupling 2 Inch to 8 Inch (N50 to N200) General escription he GRINNELL G-FIRE Figure 579 d Rigid ouplings provide a rigid joint by firmly gripping
More informationDIGITAL CAP THE MAXX PRESS OPERATOR S MANUAL
DIGITAL CAP OPERATOR S MANUAL HOTRONIX Safety Instructions When using your heat press, basic precautions should always be followed, including the following: 1. Read all instructions. 2. Use heat press
More informationFOR ENGCON STONE AND SCRAP HANDLING GRAB SK05ST-SK30ST THE WIDEST RANGE ON THE MARKET
Instruction manual Stone and scrap handling grab SK05ST-SK30ST English FOR ENGCON STONE AND SCRAP HANDLING GRAB SK05ST-SK30ST THE WIDEST RANGE ON THE MARKET Increase your excavator s efficiency and precision
More informationABLOY CAMLOCKS. Expertise at your service
R ABLOY CAMLOCKS Expertise at your service ABLOY EXPERTISE AT YOUR SERVICE ABLOY cam locks have been developed to meet the highest levels of security in the field of equipment locking. Our extensive range
More informationultra quiet fan USER MANUAL INSTALLATION OPERATION MAINTENANCE
USER MANUAL ultra quiet fan INSTALLATION OPERATION MAINTENANCE Z0414808 rev A ISSUED 02/2014 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT. safety and handling Safety Warning
More informationABLOY camlocks. Expertise at your service
R ABLOY camlocks Expertise at your service ABLOY EXPERTIsE at YoUR service ABLOY cam locks have been developed to meet the highest levels of security in the field of equipment locking. Our extensive range
More informationNHR-25 Feed Hopper with Agitator
Instruction Sheet P/N 0920-02 Description This instruction sheet provides specifications, installation instructions, and parts lists for the NHR-25 Powder Feed Hopper with Agitator. This hopper is used
More informationDM60-xxx Antennas. 1. Assembly. Installation Instruction for CMAX Antennas
Installation Guide for CMAX-DM20/DM22S/DM30/ DM60-xxx Antennas Note: Please read the complete description before starting the installation. Be sure that connectors are properly sealed from water if no
More informationThe Extraordinaire OWNER S MANUAL. Orbital Ceiling Fan. Model No. OF110** READ AND SAVE THESE INSTRUCTIONS. Net Weight 14.5 lbs. or 6.59 kg.
The Extraordinaire Orbital Fan WARNING: Support Directly From Building Structure Net Weight 14.5 lbs. or 6.59 kg. Model No. OF110** OWNER S MANUAL READ AND SAVE THESE INSTRUCTIONS Important Safety Instructions
More informationTechnical Data. Outlet Connections (Ref. Figure 2) ISO 7-Rc 3/8 1/2 inch NPT 3/4 inch NPT. Nominal Assembly Lengths Ref. Table A
Worldwide Contacts www.tyco-fire.com FASTFLEX Model YN25, YB25, and YB28 Flexible Hose Europe, Middle East, and Africa Only General Description The TYCO FASTFLEX Flexible Hose is a unique sprinkler drop
More informationBR3570 REVERSIBLE HYDRAULIC PLATE COMPACTOR PARTS BOOK
BARTELL MORRISON INC. 375 Annagem Blvd., Mississauga, ON L5T 3A7 Telephone: 1-647-953-4100 Fax: 1-647-953-4101 BR3570 REVERSIBLE HYDRAULIC PLATE COMPACTOR www.bartellglobal.com Doc. # Orig. Rel. 10/2013
More informationVORTEX FR-W1810. s INSTALLATION INSTRUCTIONS. modernforms.com. works with the Google Assistant
VORTEX s INSTALLATION INSTRUCTIONS DC WET MOTOR SMART works with the Google Assistant modernforms.com All Modern Forms Smart Fans are: WET SMART Durably finished and Rated for interior and exterior use
More informationOPERATING AND SETTING MANUAL
COMPLETE SOLUTIONS FOR ON-DEMAND CD AND DVD PRODUCTION Speed Wrap Case Wrapper for CD or DVD Cases OPERATING AND SETTING MANUAL TP 000 156-1 - Thank you for purchasing a JMV Robotique Speed Wrap OPERATING
More informationMarley Ultra Quiet Fan
USER MANUAL Marley Ultra Quiet Fan DESIGNED FOR INDUCED-DRAFT COOLING TOWER APPLICATIONS M2012-1165 ISSUED 8/2012 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT. safety and
More informationPipe Support Systems
Pipe Support Systems Many years of experience in manufacturing pipe support systems means the TIO range is all but limitless. Whatever the application, there will be a pipe system to solve your problem.
More informationST More than the sum of their components GAS DETECTION SYSTEMS
ST-16646-2008 More than the sum of their components GS DETETION SYSTEMS D-32066-2011 2 3 Superior performance with a pedigree Dräger is a successful global player in the field of stationary gas measuring
More informationHR Powder Feed Hopper
Instruction Sheet P/N 106977E0 Description This instruction sheet provides specifications; installation and operation instructions; and parts lists for the HR-16-150 powder feed hopper. The hopper is shipped
More informationABLOY camlocks. Expertise at your service
R ABLOY camlocks Expertise at your service 1 ABLOY EXPERTISE AT YOUR SERVICE ABLOY cam locks have been developed to meet the highest levels of security in the field of equipment locking. Our extensive
More informationHorizontal, Vertical and Mobile Test Beds Horizontal Test Beds All Chant Engineering Horizontal Test Beds come standard with fully enclosed hydraulically operatored safety guards (ends, top, bottom) for
More informationAspirating Accessories: Pipes and Fittings
Aspirating Accessories: Pipes and Fittings Aspirating Smoke Detection Design aspiration pipe networks with ABS pipe, fittings and related accessories specified by System Sensor. As the world s leading
More informationConsignes d installation
PBS-200-A Single entry power junction box Installation Instructions PBS-200-A Single entry power junction box with cold applied connection technology for use with BARTEC PSB / HSB trace heaters Consignes
More informationProduct Name: Guardrail Receiver
Product Name: Guardrail Receiver Part #: 15158; 15159; 15188; 61027; 61029; 61140; 61141 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment!
More informationWOODY FR-W L. s INSTALLATION INSTRUCTIONS. modernforms.com. works with the Google Assistant
WOODY -60L s INSTALLATION INSTRUCTIONS DC WET MOTOR SMART works with the Google Assistant modernforms.com All Modern Forms Smart Fans are: WET SMART Durably finished and Rated for interior and exterior
More informationHeat Exchanger Block Replacement Instructions
Series 1-4 Gas-fired water boiler Heat Exchanger Block Replacement Instructions Ultra-80 S1-4 Heat Exchanger Block Replacement Kit, Part No. 383-500-773 Ultra-105 S1-4 Heat Exchanger Block Replacement
More information1,000W (DAP-60K: 100 W per digestion vessel)
The perfect beginner s model All the benefits at a glance Speedwave Entry Technical specifications User-friendly Quick and easy to start: the high-quality TFM TM -PTFE digestion vessels consist of only
More informationCC1000 Production / Industrial Hose Crimper
The CC000 Series hose crimper with the Patented t ed ACT Controller and 485 tons of crimping force has the capability to crimp hoses from ¼" up to 0" in diameter. UNIQUE USER FRIENDLY PATENTED ACT TM CONTROLLER
More informationInstallation LC800. Patient Care Unit, 47", Fixed Water Closet. Table of Contents
LC800 Patient Care Unit, 47", Fixed Water Closet Table of Contents Pre- Information.................2 Supplies Required........................2 Step 1: Water Closet......................3 Step 2: LC800
More informationMAXIMA ULTRA 68 D _ BARRIERA AUTOMATICA AUTOMATIC BARRIER BARRIÈRE AUTOMATIQUE AUTOMATISCHE SCHRANKE BARRERA AUTOMÁTICA
D812171 00550_06 16-05-17 BARRIERA AUTOMATICA AUTOMATIC BARRIER BARRIÈRE AUTOMATIQUE AUTOMATISCHE SCHRANKE BARRERA AUTOMÁTICA ISTRUZIONI D USO E DI INSTALLAZIONE INSTALLATION AND USER S MANUAL INSTRUCTIONS
More informationLEGACY AUTHENTICITY CONTENTS
I N S T L L T I O N M N U L CONTENTS! EFORE YOU EGIN SFETY & PRECUTIONS 2-3 FN PLCEMENT 4 MINTENNCE 5 IN THE OX 6 TOOLS NEEDED 7 INSTLLTION STEP 1: MOUNTING 8 STEP 2: MOTOR SSEMLY 9 STEP 3: RETENTION SYSTEM
More informationRADIANT CEILING HEATER SYSTEMS
EFS 1018 v11 12/18 Wireless Heating Systems RADIANT CEILING HEATER SYSTEMS with Wireless Time and Temperature Control Lot 20 compliant Member All local space heaters manufactured for sale in the EU after
More informationHakki Pilke Raven spare parts manual
1 ENGLISH Hakki Pilke Raven spare parts manual Valimotie 1, FI-85800 Haapajärvi, FINLAND Tel. +358 8 772 7300, Fax +358 8 772 732 info@maaselankone.fi, www.maaselankone.fi 2 Table of contents 1 Upper section
More informationMAXIMA ULTRA 35 D _05_ BARRIERA AUTOMATICA AUTOMATIC BARRIER BARRIÈRE AUTOMATIQUE AUTOMATISCHE SCHRANKE BARRERA AUTOMÁTICA
D812170 00550_05_ 01-03-17 BARRIERA AUTOMATICA AUTOMATIC BARRIER BARRIÈRE AUTOMATIQUE AUTOMATISCHE SCHRANKE BARRERA AUTOMÁTICA ISTRUZIONI D USO E DI INSTALLAZIONE INSTALLATION AND USER S MANUAL INSTRUCTIONS
More informationTABLE OF CONTENTS. NOTE: Read the entire instruction manual before starting the installation. TROUBLESHOOTING... 13
R 410A Duct Free Split System Air Conditioner and Heat Pump Product Family: DFS4(A/H) System, DFC4(A/H)3 Outdoor, DFF4(A/H)H Indoor NOTE: Read the entire instruction manual before starting the installation.
More informationAccessories for Air Conditioning BASES AND SUPPORT SYSTEMS FOR EXTERNAL UNITS
Accessories for Air Conditioning BASES AND SUPPORT SYSTEMS FOR EXTERNAL UNITS FLOOR-STANDING FOOT RAPID FASTENING PIN Ø 10 HEIGHT 90 mm AVAILABLE IN IVORY OR BLACK SUITABLE FOR SMALL AND MEDIUM SIZED UNITS
More informationAssembly solutions for Auto Tier
Assembly solutions for Auto Tier www.emhart.com www.emhart.com Real challenges. The automotive industry demands the best assembly methods. Automotive and Tier customers demand the most efficient and cost
More informationR-LX-CS-ZP Zinc Plated Countersunk Concrete Screw Anchor
R-LX-CS-ZP Zinc Plated Countersunk Concrete Screw Anchor Self-tapping concrete screwbolt Approvals and Reports ETA 17/0806 Product information Features and benefits Time-efficient installation through
More informationHustler Z Bac Vac Parts Manual ,
Hustler Z Bac Vac Parts Manual 967, 988 Hustler Turf Equipment P.O. Box 7000 Hesston, Kansas 6706-097 t- 56 06/08 Table of Contents Chapter General Information.................................... - Chapter
More informationPole Mounting System Installation & Certification Manual
Pole Mounting System Installation & Certification Manual IronRidge Pole Mount Installation Guide... 2 IronRidge Certification Letter... 17 IronRidge Wet Stamped Drawing... 18 IronRidge Foundation Addendum...
More informationHYDRA FR-W L; FR-W L; FR-W L
HYDRA -80L; -96L; -120L s INSTALLATION INSTRUCTIONS DC WET MOTOR SMART works with the Google Assistant modernforms.com All Modern Forms Smart Fans are: WET Durably finished and Rated for interior and exterior
More informationR-LX-HF-ZF Zinc flake coated Hex with Flange Concrete Screw Anchor. Applications
R-LX-HF-ZF Zinc flake coated Hex with Flange Concrete Screw Anchor Self-tapping concrete screwbolt Approvals and Reports ETA 17/0806 Product information Features and benefits Time-efficient installation
More informationKey benefits. w Recycled content contributes to less greenhouse gas emissions during manufacturing.
Natural light maximised Energy consumption reduced Manage privacy Heat gain reduced Working conditions improved Key benefits w System operation: reduces thermal heat gain by up to 93% 1, minimizes air
More informationDIGITAL CLAM THE MAXX PRESS OPERATOR S MANUAL. Available models: MAXX Clam 11" x 15", 16" x 16", 16" x 20" (shown)
DIGITAL CLAM OPERATOR S MANUAL Available models: MAXX Clam 11" x 15", 16" x 16", 16" x 20" (shown) HOTRONIX Safety Instructions When using your heat press, basic precautions should always be followed,
More informationAVANI Grinding Booth
AVANI Grinding Booth GB-6066-DD Customer: Kelly Walsh Customer PO#: 11305 AVANI SO#: Serial #: 153920-153921 Ship Date / Install Date: Tested By: Please read and save these instructions. Read carefully
More informationAVIATOR FR-W s INSTALLATION INSTRUCTIONS. modernforms.com. works with the Google Assistant
AVIATOR -54 s INSTALLATION INSTRUCTIONS DC WET MOTOR SMART works with the Google Assistant modernforms.com All Modern Forms Smart Fans are: WET SMART Durably finished and Rated for interior and exterior
More informationORB 62 & 82 FR-W L; 82L
ORB 62 & 82-62L; 82L s INSTALLATION INSTRUCTIONS DC WET MOTOR SMART works with the Google Assistant modernforms.com All Modern Forms Smart Fans are: WET SMART Durably finished and Rated for interior and
More informationUNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT
The series hose crimper with Micrometer Style Adjustment and 62 tons of crimping force has the capability to crimp hoses up -¼" -2 wire, -¼" 4 wire, and " 6 wire. UNIQUE USER FRIENDLY MICROMETER STYLE
More informationSpring-type straight pins Coiled, light duty
BRITISH STANDARD BS EN ISO 8751:2007 Spring-type straight pins Coiled, light duty The European Standard EN ISO 8751:2007 has the status of a British Standard ICS 21.060.50 BS EN ISO 8751:2007 National
More informationCERVANTES FR-W L
CERVANTES -56L s INSTALLATION INSTRUCTIONS DC WET MOTOR SMART works with the Google Assistant modernforms.com All Modern Forms Smart Fans are: WET Durably finished and Rated for interior and exterior use
More informationSee Boiler Water Level at. Any Angle, Any Distance. Simpliport 180. Water Gage System
See Boiler Water Level at ny ngle, ny Distance Simpliport 180 Water Gage System Simpliport 180 Water Level Gage System Patent # 7,047,806B2 New Wide ngle Optics Illuminates Boiler Water Level at ny ngle,
More informationBARTELL MORRISON INC. 375 Annagem Blvd., Mississauga, ON L5T 3A7 Telephone: Fax: RAMMER BR68 PARTS BOOK
BARTELL MORRISON INC. 375 Annagem Blvd., Mississauga, ON L5T 3A7 Telephone: 1-647-953-4100 Fax: 1-647-953-4101 RAMMER BR68 www.bartellglobal.com Doc. # PB-B09029 Orig. Rel. 07/2016 Curr Rev. - 00 www.bartellglobal.com
More informationCR20-07 A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR2-7 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos pump 965513 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/965513/cr-2-7-a-f-a-e-hqqe.html
More informationWYND 42 & 52 FR-W L; FR-W L
WYND 42 & 52-42L; -52L s INSTALLATION INSTRUCTIONS DC WET MOTOR SMART works with the Google Assistant modernforms.com All Modern Forms Smart Fans are: WET Durably finished and Rated for interior and exterior
More informationDyna-Star HP, HF, 10:1 Pumps: 120# and 400# Drum Cover and Follower Plate
Instructions Dyna-Star HP, HF, 0: Pumps: 20# and 00# Drum Cover and Follower Plate 278C EN Drum Cover and Follower Plate for use with Dyna-Star 0:, HP, or HF Pumps. For professional use only. To reduce
More informationSelfie. Curving flexibility. Smooth and quiet rollers. Exceptionally easy installation.
Designed to enable easy bending into a curve. Ready to be bent into L-shaped, S-shaped, U-shaped and other shaped curves. Special bender enables bending by hand at the installation site. Curving flexibility.
More informationBand Heaters W A T L O W. Special Mica Barrel and Nozzle
W A T L O W For over 80 years, Watlow has been solving complex and unique application problems with standard mica barrel and nozzle heaters. Watlow is continuously improving design and application knowledge
More informationLaboratory Twin-Screw Kneader Modular design easy to use versatile in application
Laboratory machines for the processing of polymers Laboratory Twin-Screw Kneader Modular design easy to use versatile in application ZK 25 ZK 35 ZK-D The flexible laboratory machine for co-rotation and
More informationMODEL: FA007C FA008C STANDARD SPRAY, STANDARD QUICK RESPONSE, 5 3 mm BULB TYPE, K5.6, 1/2" CONNECTING THREAD WRENCH FLAT
Tel: 00-44-8450751042 Fax: 00-44-8450751043 Email: info@fireguard-uk.com 2nd FLOOR 145-157 ST.JOHNS STREET LONDON EC1V 4PY UNITED KINGDOM CONCELED PENDENT SPRINKLERS MODEL: F007C F008C STNDRD SPRY, STNDRD
More informationMultiple Washer Laundry Control System Pneumatic - Wall Mount - 1 Channel - Installation Guide
Multiple Washer Laundry Control System Pneumatic - Wall Mount - 1 Channel - Installation Guide 90097621 Rev. A 12/16 i Table of Contents 1. Safety Measures and Requirements 1 2. General Description 1 3.
More informationNGC-20-C-E and NGC-20-CL-E
Field-mounted Electronic heat-tracing control unit Product overview The DigiTrace NGC-20 is an electronic heat-tracing control unit featuring the benefits of local control and the capability for central
More informationFlush-Mount Backing. Flush-Mount ADA Compliant Backing (pat# 5,189,857) :
Flush-Mount Backing Flush-Mount ADA Compliant Backing (pat# 5,189,857) : Flush-Mount is the backing solution that is easy and fast to install between studs when a smooth wall is demanded. UL Tested to
More informationTools & Test Equipment
Tools & Test Equipment With such a large complement of connectors to offer, it is only fitting that you ll find an equally complete offering of Emerson termination tools.this line of products includes
More informationTURBO Fiberglass Cone Fan and Grill Fan 48'' Belt Drive. Installation & Operator s Instruction Manual
TURBO Fiberglass Cone Fan and Grill Fan 48'' Belt Drive Installation & Operator s Instruction Manual July 1998 MV1383B Chore-Time TURBO TM Fan Extended Warranty Chore-Time Equipment warrants new TURBO
More informationInstallation, Operation & Maintenance Instructions
Installation, Operation & Maintenance Instructions 313 OVERFLOW TRAP TALE OF CONTENTS Overview... Cover General Information... Cover Installation... 4 Operation... 4 Maintenance... 4 Float all Level Test
More informationLINEAR HEAT DETECTION SENSOR CABLE ACCESSORIES
Tel: +44 (0) 8452 602 702 Fax: +44 (0) 8452 602 902 Email: proline@linedetect.com Web: www.lineardetection.com UK OFFICE: 1 Wheatsheaf Close, Ottershaw, Surrey. KT16 0JA. United Kingdom LINEAR HEAT DETECTION
More informationFA-200 Alarm Bar User s Guide
FA-200 Alarm Bar User s Guide Rev. A October 2009 P/N F05-4030-000 Copyright 2009 RAE Systems by Honeywell Contents Warnings... 3 1 Standard Contents... 4 2 General Information... 4 2.1 Key Features...
More informationEX-TECH SIGNALLING SAS SD100-1 WEATHERPROOF SOUNDER/HORN TECHNICAL MANUAL
PRODUCT NAME: SD-100-1- WEATHER-PROOF SOUNDER/HORN DOC NO.: EX-TECH SIGNALLING SAS-12-SD100-1-TM REV03 WEATHERPROOF SOUNDER/HORN IP66 SD-100 SERIES EX-TECH SIGNALLING SAS SD100-1 WEATHERPROOF SOUNDER/HORN
More informationHex-Key Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P Hex-Key Wrenches r o f e s s i o n a l s. Klein hex keys are the tools professionals cannot afford to be without. Heat-treated and tempered for superior strength and durability, Klein hex keys
More informationGuide - Basic Information
Industry Project Experience INTEGRATED SOLUTIONS FOR INGREDIENT AUTOMATION Charlie Seba ASB Baking Tech 2014 Previously project managed large green and brown field projects Sweet Goods Bakery PA Mix Facility
More informationConnectors for Optic Fibre Cable
Connectors for Optic Fibre Cable Direct Buried Connectors and End Caps Push-In Fittings 6270 Page 1-75 6270..03 Page 1-75 6273 Page 1-75 6273..03 Page 1-75 Direct Install Connectors and End Caps 6271 Page
More informationSPECIFICATION DELETED SECTION CENTRIFUGAL HVAC FANS
SECTION 23 34 16 CENTRIFUGAL HVAC FANS PART 1 - GENERAL 1.01 RELATED DOCUMENT A. Drawings and general provisions of the contract, including General and Special Conditions and Division 01 Specification
More informationThe Intelligent Choice for Rapid, Accurate Microwave Moisture/Solids Analysis. Innovators in Microwave Technology. Chemicals & Coatings.
Chemicals & Coatings Dairy Food & Meat Pharmaceuticals The Intelligent Choice for Rapid, Accurate Microwave Moisture/Solids Analysis Pulp & Paper Wastewater Innovators in Microwave Technology Let the SMARTWare
More informationGuideLine 2. Highly Visible Alignment Lasers for Visually Demanding Surfaces
Highly Visible Alignment Lasers for Visually Demanding Surfaces The Guideline 2 Range The provides a reliable and robust industrial alignment laser for a wide range applications including the alignment
More informationStopper Station Series Push Button Models SS2xx2, SS2xx5, SS2xx9
Installation and Service Instructions Stopper Station Series Push Button Models SS2xx2, SS2xx5, SS2xx9 ADA Compliant NOTE For LTUL Models, Form C contacts on timer, Rated 30 VDC 3A, the enclosed timer
More informationSpeaker Wall Mount (MSP-DCCSPM)
INSTALLATION INSTRUCTIONS Speaker Wall Mount () The speaker wall mount is a convenient mounting solution for speakers that are compatible with flat panel displays. The speaker wall bracket is equipped
More informationMYKONOS FR-W L
MYKONOS -52L s INSTALLATION INSTRUCTIONS DC WET MOTOR SMART works with the Google Assistant modernforms.com All Modern Forms Smart Fans are: WET Durably finished and Rated for interior and exterior use
More informationCR A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR32--2 A-F-A-E-HQQE 3x/69 5 HZ Grundfos pump 9612212 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/9612212/cr-32--2-a-f-a-e-hqqe.html
More informationMORPHEUS II & III FR-W L; FR-W L
MORPHEUS II & III FR-W1812-60L; FR-W1813-60L s INSTALLATION INSTRUCTIONS DC WET MOTOR SMART works with the Google Assistant modernforms.com All Modern Forms Smart Fans are: WET SMART Durably finished and
More informationProduct Information. Brushes. Drum brace cable
Product Information Mega-Polisher Washing & Polishing Equipment Top cover Sliding door Infeed chute Drum drive belt Drum motor gearbox Brush motor gearbox Brush drive belt Synchronous belt Drum Brushes
More informationRecycling Solutions Machines & Complete Systems. For the Effective Processing of Reusable Materials
Recycling Solutions Machines & Complete Systems For the Effective Processing of Reusable Materials The BHS-Sonthofen head offi ce at the company headquarters in Germany About BHS. BHS-Sonthofen GmbH is
More informationRADIANT CEILING HEATER SYSTEMS
EFS 1018 v9 10/16 Wireless Heating Systems RADIANT CEILING HEATER SYSTEMS with Wireless Time and Temperature Control Member Radiant heat is directional heat, so radiant panels will project heat in a straight
More informationA. Section includes Factory Packaged, Modular units, providing cooling and heating for air distribution systems.
15855 AIR HANDLING UNITS SPECIFIER: CSI MasterFormat 2004 number: 237313 PART 1 GENERAL 1.1 SUMMARY A. Section includes Factory Packaged, Modular units, providing cooling and heating for air distribution
More informationILNAS-EN ISO 10684:2004
Fasteners - Hot dip galvanized coatings (ISO 10684:2004) Éléments de fixation - Revêtements de galvanisation à chaud (ISO 10684:2004) Verbindungselemente - Feuerverzinkung (ISO 10684:2004) 07/2004 National
More informationCartridge Heaters. Components. Application Guidelines
Application Guidelines Up to 1.297" Dia. Up to 60" Lengths Up to 11,500 Watts 120 and 240 Volt Up to 1400 F Max. Working Temp. Modification Available to Fit Custom Applications Type CIR cartridge heaters
More informationINSTALLATION, OPERATION, AND MAINTENANCE MANUAL
INSTALLATION, OPERATION, AND MAINTENANCE MANUAL TUBE AXIAL FANS BTA, WTA, HTA, DDA The purpose of this manual is to aid in the proper installation and operation of the fans. These instructions are intended
More informationAUTO OPEN SERIES CLAM/HOVER PRESS OPERATOR S MANUAL
AUTO OPEN SERIES CLAM/HOVER PRESS OPERATOR S MANUAL HOTRONIX CLAM PRESS Safety Instructions When using your heat press, basic precautions should always be followed, including the following: 1. Read all
More informationASSEMBLY and INSTALLATION INSTRUCTIONS. Pipe wrench Ratchet 3/8 socket 9/16 socket 11/16 socket 3/16 Allen key 3/32 Allen key 9/64 Allen key
ASSEMBLY and INSTALLATION INSTRUCTIONS Gas Conversion Kit Tube Heaters View these instructions online at www.lbwhite.com Kit Contents: DESCRIPTION QTY. Instructions 1 Burner orifi ce 1 Manifold pipe 1
More informationUNIQUE USER FRIENDLY MICROMETER STYLE ADJUSTMENT
The series hose crimper with Micrometer Style Adjustment and 80 ton cylinder has the capacity to crimp hoses up to 1-¼" 4 wire (with standard dies) and up to 1-¼" 6 wire and 2" 4 wire (with larger dies).
More informationRetrofit an evacuated tube collector to an existing cylinder Updated
Run On Sun Australia Retrofit an evacuated tube collector to an existing cylinder Updated 2-8-2018 To contact Run On Sun Australia Pty Ltd Phone Andrew on (02) 6734 6322 Email: andrew@runonsun.com.au Website:
More informationInstallation Instructions
8GXM / 0GXM Multi---Split High---Wall Duct Free Split System 8GXM --- Size 18k, k, and 0k 0GXM --- Size 9k, 1k, and 18k Installation Instructions NOTE: Read the entire instruction manual before starting
More informationFIGURE 1: MODEL UMC MANIFOLD CHECK ASSEMBLY MATERIALS OF CONSTRUCTION
A 6 6 9 6 7 8 0 9 5 8 6 6 7 0 5 5 5 SECTION A-A A A A ITEM NO. DESCRIPTION MATERIAL UMC ODY DUCTILE IRON RECESSED HEX PLUG STAINLESS STEEL FLOW SWITCH SEE FLOW SWITCH TECHNICAL LITERATURE RIGID COUPLING
More informationCHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Trailer Assembly 01 190331 Frame Assembly w/plugs 02 180741 Bracket, Axle, Trailer 03 180751 Axle, Trailer 04 180641 Washer,.8" ID, 1.5"
More informationUMA-1020 Light Weight Suspended Ceiling Kit
INSTALLATION INSTRUCTIONS UMA-1020 Light Weight Suspended Ceiling Kit The provides a sturdy support for LCD/DLP hanging brackets (and certain other products weighing less than 50 pounds) when installing
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 11/06/2017
SECTION 10 2800 - TOILET, BATH, AND LAUNDRY ACCESSORIES GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
More informationNGC-20-C-E and NGC-20-CL-E
Field-mounted Electronic heat-tracing control unit Product overview The aychem NGC-20 is an electronic heat-tracing control unit featuring the benefits of local control and the capability for central monitoring.
More informationYou work hard on your panel. we work hard in your panel. PRODUCTS FOR
You work hard on your panel we work hard in your panel. PRODUCTS FOR 2 PRODUCTS FOR You simply won t find better panel components. Thomas & Betts has everything you need to make your panel better than
More information