Pipe Support Systems

Size: px

Start display at page:

Download "Pipe Support Systems"

Violet Shaw
6 years ago
Views:

1 Pipe Support Systems

Many years of experience in manufacturing pipe support systems means the TIO range is all but

From clamp blocks, to hangers, anti-vibration, high temperatures, isolation, varying metals,

pipe support solutions Fire retardant rubber moulded components do not support the surface an

includes pipe hangers, pipe linings, sliding bearings, blocks and pads for all types of

Wide range of standard sizes Various options to suit different pipe constructions from static

2 Many years of experience in manufacturing pipe support systems means the TIO range is all but limitless. Whatever the application, there will be a pipe system to solve your problem. From clamp blocks, to hangers, anti-vibration, high temperatures, isolation, varying metals, sizes etc. we can provide the solution. pipe support solutions Fire retardant rubber moulded components do not support the surface an be manufactured to meet operational temperatures ranging from - o to +0 o Pipe support range includes pipe hangers, pipe linings, sliding bearings, blocks and pads for all types of application. Wide range of standard sizes Various options to suit different pipe constructions from static to moving/ expanding pipework. Designed by working with offshore specialists High quality products World renowned for many years Quality assurance to S EN ISO 01. ome to us with your problem and we co.uk or call our dedicated technical team on

S/L lip Strip olour: Red Hardness (IRHD):

80 g/cc Operating Temp: -º to +0º JW Ref

55-0 55-0 55-0 55-00 ase () Thickness 9.

the highest level of shock and vibration

manufactured to suit temperatures up to 0.

3 S/L lip Strip olour: Red Hardness (IRHD): 9 ± 5º Density: 0.80 g/cc Operating Temp: -º to +0º JW Ref Number ase () Thickness lip Width (). 19 mm mm 3 mm mm 4 mm 7 0 mm 1 mm 1 mm Recess Depth (R) Wall Width (W) mm W R HT/L lip Strip olour: reen Hardness (IRHD): 9 ± 5º Density: 0. g/cc Operating Temp: -º to +1º JW Ref Number ase () Thickness lip Width (). 19 mm mm 3 mm mm 4 mm 7 0 mm 1 mm 1 mm Recess Depth (R) Wall Width (W) mm W R VHT/L lip Strip olour: Yellow Hardness (IRHD): 5 ± 5º Density: 1.20 g/cc Operating Temp: -0º to +0º Flexibility: Retained after 1 month at +0º ase () Thickness lip Width () Recess Depth (R) Wall Width (W) lip Strips have been designed to provide the highest level of shock and vibration isolation between pipe work and hanger. vaialble in three grades for varying applications, W R install and can be manufactured to suit temperatures up to 0. lip Strips

rip Type TIO Pipe rips have been designed vibration

inside surface to allow movement of the pipework, and a rip

movement. Nominal Pipe Size mm inch. 1/2 19.00 3/4. 1 31.

20 8 Part Number JW 2-21 JW 2-27 JW 2 - JW 2-43 JW 2 - JW 2-1

21.5.5 37.5 43.5.5.5 5 131 3 45 55 83 3 1 Dimensions (mm) D F

O/Ds of pipes are based on S 3974 Part 1 1974 Table M 29 35 42

1/2 19.00 3/4. 1 31. 1 1/4. 1 1/2.80 2 3. 2 1/2 7.20 3 1.0 4 2.

- JW 3-7 JW 3 - JW 3-8 JW 3-9 JW 3-219 1 20.5 23 32 35 41.5 51.

5 131 3 45 55 7 83 119 1 Dimensions (mm) D F 0 5 5 80 0 0 1

4 rip Type TIO Pipe rips have been designed vibration transmission between pipework and hanger and preventing corrosion between dissimilar metals. There are two designs of pipe grip, a uide Type with a PTFE inside surface to allow movement of the pipework, and a rip Type which securely holds in the pipe in place to prevent movement. Nominal Pipe Size mm inch. 1/ / /4. 1 1/ Part Number JW 2-21 JW 2-27 JW 2 - JW 2-43 JW 2 - JW 2-1 JW 2 - JW 2-1 JW 2-18 JW Dimensions (mm) D F K For stainless steel pipes O/Ds of pipes are based on S 3974 Part Table M X Nominal Pipe Size mm inch. 1/ / /4. 1 1/ / Part Number JW 3-1 JW 3 - JW 3 - JW 3 - JW 3-45 JW 3 - JW 3-7 JW 3 - JW 3-8 JW 3-9 JW Dimensions (mm) D F K M X For u/ni pipes (based on seamless Kunifer sizes) O/Ds of pipes conform to S 2871 Part 2 Table 3. S M 18 Table 2 S MS0. lso suitable for O/D stainless steel tubing. Pipe rips

uide Type Fire retardant rubber moulded components which do not support the surface spread of Low evolution of toxic gases

5 43.5.5.5 5 131 3 53 59 77 9 Dimensions (mm) D F 0 5 5 80 0 1 199 1 1 K 0 0 0 0 0 For stainless steel pipes O/Ds of pipes are

Manufactured in mild steel S 4, rade 43.

1 1/4. 1 1/2.80 2 3. 2 1/2 7.20 3 1.0 4 2. 203.

5 uide Type Fire retardant rubber moulded components which do not support the surface spread of Low evolution of toxic gases Operational temperatures range from -º to +0º continuous; 1º intermittant Nominal Pipe Size mm inch *. 1/2 * /4 * /4. 1 1/ Part Number JW JW JW JW JW JW JW JW JW JW Dimensions (mm) D F K For stainless steel pipes O/Ds of pipes are based on S 3974 Part Table M X High quality zinc plated metal parts as Manufactured in mild steel S 4, rade 43. lso available in stainless steel to S 14, 31S11 wide range of standard sizes Nominal Pipe Size mm inch *. 1/2 * /4 * /4. 1 1/ / Part Number JW JW JW JW JW JW JW JW JW JW JW Dimensions (mm) D F K M X Provides an unrivalled level of cushioning and support Serrated inner face on rip Type provides positive pipe retention For u/ni pipes (based on seamless Kunifer sizes) O/Ds of pipes conform to S 2871 Part 2 Table 3. S M 18 Table 2 S MS0. Dimensions in mm unless otherwise stated. Non-standard sizes are available upon request. * See bolt detail Z. These items are without steel bushes and washers.

6 Sliding earings TIO ondslip units provide a simple, economical easy to install solution to the problem of accommodating movements in structures; for example due to expansion, contraction, settlement and variations in loading that might otherwise result in the development of high stresses and, potentially damage. Typical applications of TIO ondslip Units include: Low friction supports in mechanical and pipework installations Low friction guide restraints Temporary bearings employed during construction rade S/PT/P Z/PT/P RF/PT/P PF/PT/P Load earing apacity MN/m TIO ondslip Units have been developed over many years of involvement with petrochemical and industrial clients, and proven in thousands of applications worldwide. ondslip Units are custom designed and the PTFE faced lower members above and TIO S/N/P are given in the table below: Stress MN/m Friction please contact us for more information. ondslips

applications for TIO ondslip Units and the differing requirements of each, and hence have made the design of these units as custom units incorporating: Steel backing plates for easy installation, or

Polished stainless steel plates in place of the standard TIO upper member. Such plates can also be supplied pre-welded to steel backing plates. requirements, e.g. carbon steel to SEN 0, stainless steel 31L or 4.

encountered in service an be designed to accommodate rotational movement ondable substrate which accommodates surface irregularities in the structure Materials can be supplied factory bonded to steel

7 applications for TIO ondslip Units and the differing requirements of each, and hence have made the design of these units as custom units incorporating: Steel backing plates for easy installation, or units without backing plates for bonding directly to the structure on site. Steel thickness can be varied to suit the application. Polished stainless steel plates in place of the standard TIO upper member. Such plates can also be supplied pre-welded to steel backing plates. requirements, e.g. carbon steel to SEN 0, stainless steel 31L or 4. Key advantages of ond Slip units include: installation Maintenance free Smooth movement without the occurrence of stick slip Thermally stable & resistant to most environmental conditions likely to be encountered in service an be designed to accommodate rotational movement ondable substrate which accommodates surface irregularities in the structure Materials can be supplied factory bonded to steel backing plates under controlled conditions requirements e.g. painted with red oxide primer or other paint systems, hot dip galvanized or plain unpainted. Slots and holes within each member to provide positive location and restraint in one or more directions One member only, for example for use as a guide stop restraint. TIO components for additional protection in aggressive environments Wiper seals for areas heavily contaminated with abrasive dusts and powders to maintain the cleanliness of the sliding faces ustom shapes and sizes which may not necessarily be square or rectangular Thermal insulation layers Different thickness components to suit rotational movements or space restrictions. Specialist material grades to cope for exceptional loading conditions or elevated temperatures

Y H E Fø olt ø JW Part Number M92-1 1 M92- M92- M92- M92-45 45 M92- M92-7 7 M92- M92-8 8 M92-9 9 M92-219

85 1 42 0 0 7 7 114 1 1 220 324 Depth E 3 3 9.5 9.5 9.5 9.5.5.5 H Y 52 8 8 2 2 182 23 4 ø F 1 20 lamp blocks provide protection and uniform spacing of pipe lines.

which would otherwise be transmitted through the clamp to the surrounding structure or building.

S/N/ clamp blocks are identical to S/ molybdenum disulphide impregnated nylon bush to provide a low

8 Y H E Fø olt ø JW Part Number M M92- M92- M92- M M92- M M92- M M M Depth E H Y ø F 1 20 lamp blocks provide protection and uniform spacing of pipe lines. They absorb shock, noise and vibration caused velocity ducts, drumming of duct wall etc. which would otherwise be transmitted through the clamp to the surrounding structure or building. TIO clamp blocks are manufactured singly or in multiple pipe carrying sections as shown. S/N/ clamp blocks are identical to S/ molybdenum disulphide impregnated nylon bush to provide a low friction bore for the accommodation of additional longitudinal movement. Please contact us if you require a size not applications. Tel: +44 (0) Fax: +44 (0)

FAN ENGINEERING. Sealing of Fan Housings

FAN ENGINEERING. Sealing of Fan Housings FAN ENGINEERING Information and Recommendations for the Engineer FE-700 Sealing of Fan Housings Introduction A variety of options are offered by fan manufacturers to seal fan housings. Sealing the housing