E1.N. This certificate of compliance validates the following. Manufacturer details. United Arab Emirates Ministry of interior Civil Defense G.H.
|
|
- Sybil Webb
- 5 years ago
- Views:
Transcription
1 * * * ** L Jl 4 ) /.41l.Lll LJ),.Lac.)J J..IlI.A4J aijl J4JJ Q CERTIFICATE OF COMPLIANCE This certificate of compliance validates the following A C refers to EN EC-Certificate: TEST REPORT NUMBER D CERTIFICATE NUMBER Assessment Reports are not acceptable E (219...) DATE OF ISSUE DATE OF ISSUE (218...) By expiration of the DATE OF EXPIRY DATE OF EXPIRY + 2 years from date of issue standard(s) Manufacturer details NAME OF FACTORY/ MANUFACTURER CEAG Notlichtsysteme NAME OF THE BRAND EATON! CEAG GmbH FACTORY ADDRESS / Sen.-Schwartz-Ring 26 LP-Star 4-XX REGION MODEL! NO D (STREET/ TOWN / CITY / COUNTRY) GERMANY WEBSITE LOGO ON THE PRODUCT E1.N CEAG TEL lnfo-n@ceag.de LJ.j.)..4J _J.)J 2J
2 - United Arab Emirates y- J- Ministryof interior *** ** CivilDefenseG.H.Q I.,,.i. 4l1JJl Jl_)i_4)l.i..ic.$ a.i l.1..4j L.J.UJ - DESCRiPTION OF THE PRODUCT (TECHNICALDETAILSFROMTEST REPORT, SUCH AS ACTUAL FIRE RAT1NGS/DIMENSIONS/THICKNESS/ SENSrnVITV ErC) UCHASASTM/EN/DN C) Reference. Test Product Details From Test Report Report NO Central Power Supply for emergency lighting luminaires & exit signage. 230V-50/6OHz, to be used with 2 to 8 batteries (12V/l2Ah). Code no: IEC : 2005 (second edition) + Am 1: Am 2:2013 Title: Information Technology Equipment - Safety - Part 1: General Requirements 60A Scope: This standard is applicable to mains-powered or batterypowered information technology equipment, including electrical business equipment and associated equipment, with a rated voltage not exceeding 600 V. Code no: EN-50171: 2001 Title: Central Power Supply Systems Scope: European product standard specifies requirements for Central 60C Power Supply systems for emergency lighting & exit signage, such as electrical safety, design philosophy, re-charge capadty for batteries, electrical isolation, switch-over time, overload capacity and deep discharge protection to protect the batteries. Code no: EN :2001 Title: Safety requirements for secondary batteries and battery installations. Part 2: Stationary batteries Scope: European product & application standard for stationary 60D batteries and battery installations, such as charging methods, electrical safety, devices to disconnect batteries, short circuit protection, safety measures against explosion risks, ventilation requirements, requirements for battery cabinets. Product test were done by Dekra Certification B.V. Meander Mi Arnhem The Netherlands Code no: IEC : 2005 (second edition) + Am 1: Am 2:2013 The tests according the following chapters were part of the certification process: 1. General requirements TEST DESCRiPTION 2. Protection from hazards 3. Wiring, connections and supply 4. Physical requirements 5. Electrical requirements and simulated abnormal conditions L:iJ.ll.l.2.aj b).1i yjj 4lLlil ljll 2J
3 Zi41l ljl l klj. i.bji A*4j JJl Code no: EN The following tests were part of the certification process: - Product markings & warning labels Operating conditions and requirements - Permissible switch-over time - Indications operating conditions - Construction - Mechanical strength - IP Rating - Resistance against heat and fire - Interconnection & wiring - Construction of battery compartment/cabinet - battery chargers! battery charging integrity - permissible recharging time Switching & protection devices - Output voltage - Overload capacity - Deep Discharge protection Monitoring & Supervising devices - Alarm indicators - Electrical strength - Battery circuit monitoring - Isolation failure test device - Equipment markings & warning labels Code no:en :2001 The following tests were part of the certification process: - Product markings & warning labels Protection against electrical shock - protection against direct and in-direct contact - it System test - Protection against electrical separation Disconnect and Separation - Removable fuses - Construction of fuse holders Protection of short circuit - Battery terminals & fuses - Internal wiring Provisions against explosion hazards - Gas generation - Ventilation requirements - Charging/Over-Charging/Fault conditions Provisions against Electrolyte hazards - Electrolyte and water - Protective measures Accommodation & Housing - Battery cabinets/compartments SPECIFICATION OF TEST SPECIMEN The complete above mentioned tests have been carried out on models considered as representative of the system range The differences among the models in the range consist of different possible configurations of the standard components.(modular build System) L..ij.l).klJt4J b).i J.UJ k1.x.l iac. i.,j
4 yji Jij.4l 1b1I bi1i jljlji 4.)J.Ali ic.i 4.J TEST RESULT (SUCH AS PASSED CRrTERIA_J COMPLIED TO_J DURATION_JOBSERVATION_JETC) PRODUCT APPLICATION GUIDELINE (END USE) (clearly STATE THE END USE WITH EXACT FE RAflNG/TO BE INSTALLED INJTO BE INSTALLED ATJTO BE CONNECTED WITHJTO BE INSTALLED WITH ETC ALONG WITH.. ANY WARNINGS SUCHAS NOTTO BE USED IrCJNOTTO BE INSTALLED ATJ NOT TO BE INSTALLED WITh ETC. All applicable clauses as mentioned in the Test Report have passed the test. Central Power Supplies for Emergency Lighting & Exit Signage are supplying the connected emergency lighting luminaires and exit signage under both normal and power failure conditions, ensuring that a building can be safely evacuated. The Central Power Supply System LP-STAR can be installed in electrical rooms with restricted access for unskilled and untrained persons. Additionally the LP-Star system can be installed in an more common environment like offices or similar. Installation and programming of the systems has to be done by skilled persons only. Batteries must be serviced and tested according to local regulations and manufacturers statements. Compatible with EATON range of Emergency Lighting luminaires See appendix A for related certification details and compatible order A compatibility of further luminaires can be confirmed if the compatibility in the UAE-Certificate of the luminaire is confirmed in relation to this UAE-certificate. It is mandatory that such a luminaire UAE-Certificate is signed by DEKRA. L.)i J b)ji 4.i.1.,ii
5 K United Arab Emirates ZAil ki) ljla kj.i 1jl bjjj al.z i,(ii(.14 ltr.1) lyii Lc)J.AlJL.4J SJ.Iil LJ.liJ Laboratory and Certification body details NAME OF DEKRA Certification B.V. DEKRA Certification NAME OF TEST FACILITY CERTIFICATION BODY B.V. CERTIFICATION BODY Meander 1051 TEST FACILITY ADDRESS Meander 1051 ADDRESS / REGION 6825 Mi Arnhem / REGION 6825 Mi Arnhem (STREET/TOWN/CITY! COUNTRY) The Netherlands STREET/TowNIcrn /coufrrry The Netherlands WEBSITE WEBSITE certification.com certification.com TEL TEL Iighting@dekra.com Iighting@dekra.com ACCREDITED BY Dutch Accreditation ACCREDITED BY Dutch Accreditation (NAME OF ACCREDITATION BODY WHICH Council RVA (NAME OF ACCREDITATION BODY WHEH Council RVA ISSUED ACCREDITATION TO ThE ISSUED ACCREDITATION TOmE CERTIFICATION BODY, ALONG WITH www. rva n I LABORATORY, ALONG WITH WEBSrTE( www. rva. n I WEBSITE) AS PER ISO/IEC 17025:2005 AS PER ISO/IEC (STANDARD TO WHICH ThE CERTIFICATION BODY ISACCREDITEDTO) (STANDARD TO WHICH YOUR ORGANIZATION ISACCREDITEDTC ISO/IEC VALIDITY 1 March 2018 VALIDITY 1 May 2018 (EXPIRY DATE OF CERTIFICATION BODY (EXPIRY DATE OF LABORATORY 1 March 2018 ACCREDITATION) ACCREDITATION) REFERENCE NUMBER: COOl REFERENCE NUMBER: COOl (CERTIFICATION BODY ACCREDITATION (THE LABORATORY ACCREDITATION REFERENCE NUMBER TO VERIFY ON THE REFERENCE NUMBER TO VERIFY ON THE ACCREDITOR S WEBSITE( ACCREDITOR S WEBSflT) 1022 CERTIFICATION MARK _[E5 L.LJ.(.Al.4J )i( L.1JJ
6 ;i 41iI Lk)t b1 4il i) J.li :.J:J NAME OF MANUFACTURER S SIGNATORY (ENDORSEMENT) TO BE SIGNED BY MANUFACTURER Dr. Stefan Rohrmoser SIGNATURE. StefanRohrmoser@eaton.com FACTORY OFFICIAL /TEL SEAL &4rrk4 NOTES: I Undertake that all data and information provided are genuine and accurate 5 NAME OF (ENDORSEMENT) TO BE SIGNED BY CERTIFICATION BODY Drs. G.J. Zoetbrood CERTIFICATION BODY SIGNATORY EKRA CectW,CatiOfl B.V. Iighting@dekra.com CERTIFICATION BODY Me der 1051, 6825 Mi Arnhe / TEL OFFICIAL SEAL RC B0SlBS,68O2EDArnhe1 The Netherlands -r1 RQ6830O0F+31% NOTES: I Undertake that all data and information provided are genuine and I 00 COPY OF CERTIFICATE OF COMPLIANCE ISSUED BY CERTIFICATION BODY (OLD OR NEW). APPENDIX 1 Compatibility list with Luminaires. JJ L.)i41) i4.c 4J
7 Z.iaiI kj*ll ji.3at 1l 4lt.il_4il.iiJ Jhl APPENDIX 1: List of models 1- LIP-Star] Model Description /Application Voltage Lumen Hz Duration Type of Compatible with IP Supply output operation Emergency Luminaires- rating certificates # LP-STAR 4-12 Central Battery Systems 230 Vac NA 50/ 180 mm CBS UAE 20 LP-STAR 4-24 with Individual UAE LP-STAR 4-36 Monitoring providing a UAE LP-STAR 4-48 dependable supply of UAE power (230V AC/220 V DC) to safety and exit luminaires, the central battery system LP-STAR tests itself automatically and individually monitors each CG.S luminaire (up to 20 per circuit), and it does all this using the power supply cable alone. LP-STAR will be equipped with 2 to 8 Batteries (12V/l2Ah). Attaj )J JJ i4c.i.ij
This certificate of compliance validates the following
il Lj.l F- i1]i kii i LJ]l -J JJ 2224856.O1-UAE CERTIFICATE OF COMPLIANCE TEST REPORT NUMBER Assessment Reports are not acceptable DATE OF ISSUE This certificate of compliance validates the following 1
More informationET.N. This certificate of compliance validates the following. Manufacturer details. ij) kij LJL4
ij) kij LJL4 ifl 4t7J) 11I JLi)J) LJ.1Ii.àaj S)JI cjyjj J CERTIFICATE OF COMPLIANCE This certificate of compliance validates the following 1. 2224408.50 Refers to ENEC-Certificates: 2. 2224408.51 TEST
More informationUAE refers to ENEC-Certificate: TEST REPORT NUMBER DATE OF ISSUE DATE OF EXPIRY + 2 years from date of issue
k)l4j( aj,. ai 4JAi( LL1i d..4*l 1.1(.1_a.c).,J.Al.Lij OJJl JJ CERTIFICATE OF COMPLIANCE This certificate of compliance validates the following 1. 2183217.50 refers to ENEC-Certificate: TEST REPORT NUMBER
More informationUnited Arab Emirates Ministryofinterior *** Civil Defense G.H.Q.4k.1l L). 4iI CERTIFICATE OF COMPLIANCE UAE 1
2216481.50 United Arab Emirates Ministryofinterior ***.4k.1l L). 4iI L.1iJl i)jl. 2( )i.l) Li9J 2221858.O1-UAE CERTIFICATE OF COMPLIANCE TEST REPORT NUMBER Assessment Reports are not acceptable This certificate
More informationCERTIFICATE OF COMPLIANCE
Date : 13th September 2017 CERTIFICATE OF COMPLIANCE TEST REPORT NUMBER Assessment Reports are not acceptable DATE OF ISSUE DATE OF EXPIRY FACTORY/ MANUFACTURER This certificate of compliance validates
More informationAE-CU Adaptive Escape Routing for Emergency Lighting. From static to adaptive escape routing
AE-CU Adaptive Escape Routing for Emergency Lighting From static to adaptive escape routing We make what matters work.* * At Eaton, we believe that power is a fundamental part of just about everything
More informationConformity assessment procedures for the Alarm Components Scheme
Conformity assessment procedures for the Alarm RD_070, Issue 20 This guide describes the conformity assessment procedures for Alarm Components. This Alarm certifies that Alarm Components comply with technical
More informationThe product and any acceptable variation thereto is specified in the Annex to this certificate and the documents therein referred to.
CERTIFICATE Issued to Applicant MEAN WELL Enterprises Co., Ltd. No.28, Wuquan 3rd Road, Wugu District 248 New Taipei City, Taiwan Product Trade name(s) Type(s)/model(s) Licensee MEAN WELL Enterprises Co.,
More informationAS/NZS IEC :2013
AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED
More informationBattery supplied electronic ballast for emergency lighting EATON, EATON CROMPTON, EATON JSB or EATON MENVIER
CERTIFICATE Issued to: Applicant: Cooper Univel S.A. 88 Thessaloniki Street 1 00 Katerini, Greece Product Trade name(s) Type(s)/model(s) : : : Licensee: COOPER CSA S.R.L. Via San Bovio 3 - Edificio Y 090
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62040-1-2 First edition 2002-08 Uninterruptible power systems (UPS) Part 1-2: General and safety requirements for UPS used in restricted access locations Alimentations sans interruption
More informationGASTEC QA. Evaluation Guideline KE 191. Amendment A1 Excess flow valves. KE A1 March 2012
KE 191 - A1 March 2012 GASTEC QA Evaluation Guideline KE 191 Amendment A1 Excess flow valves Foreword and introduction These GASTEC QA Approval requirements amendment have been accepted by the Board of
More informationC e r t i f i c a t e Of Conformity No.: 0560-CPD /AA/05
C e r t i f i c a t e Of Conformity No.: 0560-CPD-10219002/AA/05 In compliance with the procedure specified in RD_090, Telefication declares as designated Notified Body for the European Construction Products
More informationGASTEC QA. Evaluation Guideline KE 192. Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment
KE 192 - A1 March 2012 GASTEC QA Evaluation Guideline KE 192 Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment Foreword and introduction These GASTEC QA Approval
More informationIECEx Certificate of Conformity
Page 1 of 4 IECEx Certificate of Conformity INTERNATIONAL ELECTROTECHNICAL COMMISSION IEC Certification Scheme for Explosive Atmospheres for rules and details of the IECEx Scheme visit www.iecex.com Certificate
More informationErik Leider Project Engineer Hazardous Locations, Gas & Oil Underwriters Laboratories
Hazardous Locations: Understanding the Basics of Global Compliance Requirements Erik Leider Project Engineer Hazardous Locations, Gas & Oil Underwriters Laboratories DISCLAIMER/ TERMS OF USE: THE INFORMATION
More informationAbu Dhabi Conformity Assessment Scheme for Fire Pumps
Abu Dhabi Conformity Assessment Scheme for Fire Pumps Assessment and Surveillance Plan Page i TABLE OF CONTENTS DEFINITIONS... 1 1 ABOUT THE ABU DHABI QUALITY AND CONFORMITY COUNCIL... 2 2 FOREWORD...
More informationBRL-K21030/02 5 August Certification of Alarm Communication. Certification Alarm Transmission Systems (ATS) Alarm Transmission Systems
5 August 2014 Certification of Alarm Communication Certification (ATS) Kiwa N.V. - 1-5 Augustus 2014 Preface This Evaluation Guideline (Certification Scheme) has been accepted by the Kiwa Board of Experts
More informationBRL-K629/03. Date Evaluation Guideline. for the Kiwa product certificate for. Backflow protection devices. Family E, Types A, B, C and D
BRL-K629/03 Date 01-02-2012 Evaluation Guideline for the Kiwa product certificate for Backflow protection devices Family E, Types A, B, C and D Preface Kiwa This (BRL) has been drawn up by Kiwa's Board
More informationAustralian Standard. Emergency escape lighting and exit signs for buildings. Part 1: System design, installation and operation AS 2293.
AS 2293.1 2005 AS 2293.1 2005 Australian Standard Emergency escape lighting and exit signs for buildings Part 1: System design, installation and operation This Australian Standard was prepared by Committee
More informationThis annex is valid from: to Replaces annex dated: Prolonged until
Registration : L 022 This annex is valid from: 13-09-2017 to 01-03-2018 Replaces annex dated: 13-06-2016 Prolonged until 01-09-2018 Meander 1051 6825 MJ Arnhem The Netherlands Location(s) where activities
More informationLGA... Gas Burner Controls. Siemens Building Technologies Landis & Staefa Division
7 418 ISO 9001 Gas Burner Controls LGA... The LGA... are used for the startup and supervision of atmospheric gas burners of low to medium capacity, without fan assistance, in intermittent operation. The
More informationA three-pole dead-tank SF 6 circuit-breaker incorporating one interrupter per pole in single-pole enclosures with a common operating mechanism
Object A three-pole dead-tank SF 6 circuit-breaker incorporating one interrupter per pole in single-pole enclosures with a common operating mechanism 2153-16 Type TCB 145-40-31 Serial No. 16000702, 16000703
More informationRENAR Accreditation Activities
RENAR accreditation activities represent the scopes where RENAR has competence to provide accreditation services. RENAR defined its accreditation activities in accordance with the EA MLA scope (EA multilateral
More informationAS/NZS :2015
AS/NZS 60598.2.10:2015 (IEC 60598.2.10, Ed.2.0:2003, MOD) Australian/New Zealand Standard Luminaires Part 2.10: Particular requirements Portable luminaires for children Superseding AS/NZS 60598.2.10:1998
More informationBRL-K618/ Evaluation Guideline. for the Kiwa product certificate for Water meters
/08 2018-01-15 for the Kiwa product certificate for Water meters Preface This evaluation guideline has been accepted by the Kiwa Board of Experts Watercycle (CWK), in which all relevant parties in the
More informationGASTEC QA. Approval Requirements 31-2
KE 31-2 March 2012 GASTEC QA Approval Requirements 31-2 for the GASTEC QA product certificate for Sealing materials for metallic threaded joints in contact with 2nd and 3rd family gases and hot water Part
More informationEvaluation Guideline. regarding the Product Certificate GASKEUR Label HR (High Efficiency, Heating):2010 for Central Heating Appliances
1st February 2011 regarding the Product Certificate GASKEUR Label HR (High Efficiency, Heating):2010 for Central Heating Appliances Foreword This has been adopted by the Kiwa Board of Experts of Energy
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Location Certification Scheme Edisonstraat 12A 6902 PK Zevenaar The Netherlands
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60896-11 First edition 2002-12 Stationary lead-acid batteries Part 11: Vented types This English-language version is derived from the original bilingual publication by leaving
More informationCOMPETENCE. Lead Fire Warden. Standard Title Lead Fire Warden Competence Assessment Standard Lead Fire Warden Competence Assessment Standard
Lead Fire Warden COMPETENCE CRO EMERGENCY RESPONSE COMPETENCE ASSESMENT Standard Title Code Lead Fire Warden Competence Assessment Standard 4502 Revision 0 (28th October 2016) Page 1 of 29 OPITO STANDARDS
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Product Test Centre 15 Progress Road Eastwood Leigh-on-Sea Essex SS9 5JA Contact: Mr S Bailey Tel: +44 (0)1702 425738 E-Mail: stuart.bailey@honeywell.com
More informationAE-CU Adaptive Escape Routing for Emergency Lighting. From static to adaptive escape routing
AE-CU Adaptive Escape Routing for Emergency Lighting From static to adaptive escape routing WorkSafe Protect your people and property Specify superior escape route management technology in complex buildings
More informationBRL-K14026/ Evaluation Guideline. for the Kiwa product certificate for Extractable shower hoses for sanitary tapware
2017-05-12 for the Kiwa product certificate for Extractable shower hoses for sanitary tapware Preface This evaluation guideline has been accepted by the Kiwa Board of Experts Watercycle (CWK), in which
More informationCOMITÉ EUROPÉEN DES ASSURANCES
COMITÉ EUROPÉEN DES ASSURANCES SECRETARIAT GENERAL 3bis, rue de la Chaussée d'antin F 75009 Paris Tél. : +33 1 44 83 11 73 Fax : +33 1 44 83 11 85 Web : cea.assur.org DELEGATION A BRUXELLES Square de Meeûs,
More informationLuminaires Part 2-4: Particular requirements Portable general purpose luminaires
IEC 60598-2-4 Edition 3.0 2017-04 REDLINE VERSION colour inside Luminaires Part 2-4: Particular requirements Portable general purpose luminaires INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.140.40
More informationSECONDARY CELLS AND BATTERIES
STANDARD I.S. EN 61960:2004 ICS 29.220.99 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR TOHER National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Fax: (01) 807 3838 NON-ACID
More informationFEC403EN Installation Manual
FEC403EN Installation Manual P/N 10-4101-501-2FC1-01 ISS 22JAN15 Copyright Trademarks and patents Manufacturer 2015 UTC Fire & Security. All rights reserved. The FEC403EN name and logo are trademarks of
More informationEU-Type Examination Certificate
EU-Type Examination Certificate Measuring Instrument Directive Certificate number: 0200-MID-02784 Issued by FORCE Certification A/S, Denmark EU-notified body number 0200 In accordance with the Directive
More informationAustralian/New Zealand Standard
AS/NZS 2293.2:1995 Australian/New Zealand Standard Emergency evacuation lighting for buildings AS/NZS 2293.2:1995 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee LG/7,
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification Newport Business Park New Port Road Ellesmere Port CH65 4LZ United Kingdom Contact:
More informationINTERNATIONAL STANDARD
IEC 61892-7 INTERNATIONAL STANDARD Edition 2.0 2007-11 Mobile and fixed offshore units Electrical installations Part 7: Hazardous areas INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XA ICS 47.020.60
More informationRequirements for Electrical Installations
BRITISH STANDARD BS 7671:2018 Corrigendum (December 2018) Requirements for Electrical Installations IET Wiring Regulations Eighteenth Edition The Institution of Engineering and Technology and BSI NO COPYING
More informationTwin radial blower DRG 1200 with oval resistor, 12 and 24 Volt versions
1/8 Twin radial blower DRG 1200 with oval resistor, 12 and 24 Volt versions Content: 1 Safety advises 2 Usage 3 Construction of the DRG 1200 4 Function 5 Installation, dimensions and hole pattern 6 Technical
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Activities trading under the names and Kiwa Telefication Fire alarm/detection
More informationTwin radial blower DRG 1200
1/7 Twin radial blower DRG 1200 Content: 1 Safety advises 2 Usage 3 Construction of the DRG 1200 4 Function 5 Installation, dimension and hole pattern 6 Technical data 7 Characteristic curve 8 Validation
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62493-1 Edition 1.0 2013-07 colour inside Assessment of lighting equipment related to human exposure to electromagnetic fields Part 1: Results of the EMF measurement campaign from
More informationTest reports for the determination of B 10d values for emergency stop switches of families 800F, 800H, 800T and D7 of Rockwell Automation
Report about the inspection of test reports for the determination of B 10d values for emergency stop switches of families, 800H, 800T and of Rockwell Automation Report-No.: 968/EL 660.01/10 Date: 2010-06-08
More informationThis is a preview - click here to buy the full publication ICS ISBN
CONSOLIDATED VERSION IEC 60691 Edition 4.1 2019-01 colour inside Thermal-links Requirements and application guide INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.120.50 ISBN 978-2-8322-6430-0 Warning!
More informationHygienic Instruction. EHEDG, Installation and Cleaning Instructions. VEGAVIB VB61, VB63 Hygienic process fittings. Document ID: 35483
Hygienic Instruction EHEDG, Installation and Cleaning Instructions VEGAVIB VB61, VB63 Hygienic process fittings Document ID: 35483 Contents Contents 1 About this document... 3 1.1 Function... 3 1.2 Scope...
More informationThis annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
Annex to ISO/IEC 7025:2005 declaration also Chamber Commerce no. 246437 This annex is valid from: 06-2-206 to 0-2-207 Replaces annex dated: 25-06-205 Locations where activities are performed under accreditation
More informationEnd of Life -Discussion on Ex Luminaires for Fluorescent Lamps in Zone 1? Not a Problem for Us! EVG 05
End of Life -Discussion on Ex Luminaires for Fluorescent Lamps in Zone 1? Not a Problem for Us! EVG 05 Tested and Certified According to the Latest Standards from March 2005 EOL (END OF LIFE) What is it?
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD IEC 62115 First edition 2003-01 Electric toys Safety Jouets électriques Sécurité Reference number IEC 62115:2003(E) Publication numbering As from 1 January 1997 all IEC publications
More informationDIESEL Engine Fire Pump Controllers Features
September 007 DIESEL Engine Fire Pump Controllers Features FD0 Diesel Engine Controllers 1-1 Printer / Recorder The industrial grade thermal printer is housed in a rugged steel enclosure within the controller.
More informationEMERGENCY LIGHTING COMPLETION CERTIFICATE For small installations and verification of existing installations
A DETAILS OF THE CLIENT Client/ B DETAILS OF THE EMERGENCY LIGHTING INSTALLATION Extent of the installation covered by this certificate The Owner 19 Walker Grove, Hatfield, Hertfordshire 19 Walker Grove,
More informationAUGUST 2016 CONTENTS:
EMC SERVICES NEWSLETTER AUGUST 2016 CONTENTS: RECENT STANDARD CHANGES NEW FCC REGULATIONS IEC 60601-1-2 4TH EDITION LOW VOLTAGE DIRECTIVE EU DIRECTIVES EMC DIRECTIVE 2014/30/EU KOREA UPDATE: KN32/35 1.
More informationTwin radial blower DRG 730
1/7 Twin radial blower DRG 730 Content: 1 Part numbers 2 Safety advises 3 Usage 4 Design 5 Function 6 Technical data 7 Dimensions 8 Installation 9 Characteristic curve 10 Validation A U R O R A Konrad
More informationAustralian/New Zealand Standard
AS/NZS 2293.2:1995 (Incorporating Amendment Nos 1 and 2) AS/NZS 2293.2:1995 Australian/New Zealand Standard Emergency escape lighting and exit signs for buildings AS/NZS 2293.2:1995 This Joint Australian/New
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60519-1 Third edition 2003-07 Safety in electroheat installations Part 1: General requirements Sécurité dans les installations électrothermiques Partie 1: Exigences générales
More informationMANUAL Oil Level Sensor
PROCESS AUTOMATION MANUAL Oil Level Sensor KVF-104-PF ISO9001 0102 With regard to the supply of products, the current issue of the following document is applicable: The General Terms of Delivery for Products
More informationAccumulated Battery JULY The electronic pdf version of this document found through is the officially binding version
p pproval roramms for U rcos orasato Mutual coto (M)No. 2.9 STANDARD FOR CERTIFICATION Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-E008 Accumulated
More informationInstallation instructions
SmartBalance Wall-mounted WL484W Installation instructions Instructions de montage Montageanleitung Montage instruktie Istruzioni di montaggio Instrucciones de montaje Instruções de montagem Monteringsinstruktioner
More informationC Note! LGI16... Burner Controls. Building Technologies
7 786 Burner Controls LGI16... Burner controls For use on industrial furnaces For burners in continuous operation Without fan control and air pressure supervision Flame supervision - with QR53... / QR55,
More informationRADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 RADAR REFLECTOR JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation with
More informationA Review of America s First Step Towards the Harmonization of Portable Battery Standards: UL 62133
A Review of America s First Step Towards the Harmonization of Portable Battery Standards: UL 62133 John JC Copeland Energy Assurance LLC August 6, 2015 Awareness Overview Tests (current version) Comparison
More informationTechnical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme:
Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme: Solar products and components Accreditation Kiwa Italia S.p.A. Via Treviso 32/34 31020 San Vendemiano (TV) Italia Tel: +39
More informationCE marking & your legal obligations
CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment
More informationIEC60601_1J. Medical electrical equipment Part 1: General requirements for basic safety and essential performance
Page 1 of 157 Report No.: E309264-D1009-1-CB CB - IEC REPORT: Test Report issued under the responsibility of: IEC 60601-1 Medical electrical equipment Part 1: General requirements for basic safety and
More informationThe Impact of Marking Requirements. on Design and Performance of Power Converters and Electrical Drives
European The Impact of Marking Requirements on Design and Performance of Power Converters and Electrical Drives Harmonization of Standards The Key to the European Market C onfused E urope EN 600204 BS...
More informationTest Report. Appliance EMF Testing
Project: 11014506A Date: November 6, 2015 Model: 120V_WWF13NW Test Report On Appliance EMF Testing Copyright 2005 UL LLC UL LLC authorizes the above-named company to reproduce this Report provided it is
More informationGMA Panels with double busbar
L1 L2 L3 GAS-INSULATED SWITCHGEAR >> GMA Panels with double busbar Operating Instructions No. AGS 532 521-01 Edition 09/07 (Supplement to Operating Instructions AGS 531 521-01) Technical Instructions AREVA
More informationDeclaration of Conformity
Declaration of Conformity DEMONSTRATION OF CONFORMITY WITH RECOGNIZED STANDARDS TO SATISFY THE SAFETY AND EFFECTIVENESS REQUIREMENTS OF THE CANADIAN MEDICAL DEVICES REGULATIONS Name of the medical device
More informationAd-hoc IEC Ad-hoc investigation to determine the fire performance of a cable junction box, using the principles of IEC
Exova Warringtonfire Holmesfield Road Warrington WA1 2DS United Kingdom T : +44 (0 1925 655116 F : +44 (0) 1925 655419 E : warrington@exova.com W: www.exova.com Ad-hoc IEC 60331-2 x Ad-hoc investigation
More informationAnnubar Flowmeter Series
Reference Manual Appendix B Approvals Annubar Flowmeter Series Hazardous Locations Installations.................. page B-1 Rosemount 3051SFA Product Certifications.......... page B-1 Rosemount 3095MFA
More informationDRAFT TANZANIA STANDARD
EDC 4 (5313) P3 DRAFT TANZANIA STANDARD (Draft for comments only) Specification for Handheld Metal Detectors for Use in Weapon Detection TANZANIA BUREAU OF STANDARDS TBS 2018 First Edition 2018 0 National
More informationHYUNDAI HEAVY INDUSTRIES CO., LTD.
Certificate No.: 52700-2009-AE-KOR-RvA Initial Certification Date: 07 March, 1997 Valid: 16 March, 2015 16 March, 2018 This is to certify that the management system of CO., LTD. 1000, Bangeojinsunhwando-ro,
More informationBRL-K602. Datum Evaluation Guideline
Datum 2018-09-04 for the Kiwa product certificate for valves, control valves and non-return valves for drinking water transport and drinking water distribution systems Preface This evaluation guideline
More informationRegulated Ex-Heater HEX with internal controller, HEX with external controller II 3 G II 3 D
Regulated Ex-Heater HEX5-1.08 with internal controller, HEX5-2.08 with external controller II 3 G II 3 D Instruction Manual Version 1.02.00 Dear customer, we have made up this operating manual in such
More informationLow-voltage switchgear and controlgear - rated voltage does not exceed 1000V AC or 1500V DC
CLASS PROGRAMME Type approval DNVGL-CP-0396 Edition December 2015 Low-voltage switchgear and controlgear - rated voltage does not exceed 1000V AC or 1500V DC The electronic pdf version of this document,
More informationRules for Classification and Construction Additional Rules and Guidelines
VI Rules for Classification and Construction Additional Rules and Guidelines 7 Guidelines for the Performance of Type Approvals 7 Test Requirements for Statical Converters with Semi-Conductors Edition
More informationManagement Systems Certification Ltd
Management Systems Certification Ltd 48 South Street, New Ross, Co. Wexford Management Systems Certification Body Registration number: 5011 is accredited by the Irish National Board (INAB) to undertake
More informationCO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.017 Version 2 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group
More informationNEC Requirements for Standby Power Systems. New England Building Officials Education Association Annual Conference October 5, 2015
NEC Requirements for Standby Power Systems New England Building Officials Education Association Annual Conference October 5, 2015 Emergency & Standby Power Systems Alternative power sources are utilized
More informationAS/NZS 62560:2017. Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications AS/NZS 62560:2017
AS/NZS 62560:2017 (IEC 62560, Ed. 1.1:2015, MOD) Australian/New Zealand Standard Self-ballasted LED-lamps for general lighting services by voltage 50 V Safety specifications Superseding AS/NZS IEC 62560:2014
More informationLFE50. UV Flame Safeguard. Building Technologies Division DETACTOGYR
7 783 DETACTOGYR Flame Safeguard The... together with the QRA50M / QRA51M form a self-checking flame supervision system (DETACTOGYR ) designed for use with continuously operating oil or gas burners or
More informationAd-hoc IEC Ad-hoc investigation to determine the fire performance of a cable junction box, using the principles of IEC
Exova Warringtonfire Holmesfield Road Warrington WA1 2DS United Kingdom T : +44 (0 1925 655116 F : +44 (0) 1925 655419 E : warrington@exova.com W: www.exova.com Ad-hoc IEC 60331-2 x Ad-hoc investigation
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MET LABORATORIES, INC. 13501 McCallen Pass Austin, TX 78753 Frank Casbolt Phone: 512 287 2500 Frank.casbolt@metlabs.com http://www.metlabs.com I. ELECTRICAL
More informationFederal Law of the Russian Federation of December 27, 2009 N 347-FZ "Technical regulation on safety of low-voltage equipment" Part I
Сближение ЕС и РФ в области технического регулированияь стандардизации и систем сертификации» АФНОР/ДИН/БСИ/СВЕДАК Контракт н. 2009/214-140 Проект финансируется Европейским Союзом Approximation of EU and
More informationThis annex is valid from: to Replaces annex dated: Imposed suspension for the crossed out activities as of
Annex to declaration accreditation (scope accreditation) This annex is valid from: 03-05-2018 to 01-05-2022 Replaces annex dated: 12-04-2018 Imposed suspension for the crossed out activities as 03-05-2018
More informationIndependent, accredited testing station Member laboratory of STL and LOVAG
Independent, accredited testing station Member laboratory of STL and LOVAG TYPE TEST REPORT NO. 3096.2081034.859 GSAB Elektrotechnik GmbH Lindenstraße 23 99718 Greußen GERMANY GSAB Elektrotechnik GmbH
More informationPQS Independent type-testing protocol
PQS Independent type-testing protocol WHO/XXX Original: English Distribution: General TITLE: Integrated electronic maximum-minimum thermometer, with factory programmed alarms, for vaccine refrigerators
More informationBRL-K14008/ Evaluation guideline. for the Kiwa product certificate for Cartridges to be used for sanitary tapware: Mechanical mixers
01-02-2012 Evaluation guideline for the Kiwa product certificate for Cartridges to be used for sanitary tapware: Mechanical mixers Preface This evaluation guideline has been accepted by the board of experts
More informationPRODUCT PERFORMANCE TEST REPORT. Report No.: D Test Date: May 29, Rendered to: Natural Light Energy Systems Phoenix, Arizona
Architectural Testing PRODUCT PERFORMANCE TEST REPORT Report No.: D7226.01-121-24 Test Date: May 29, 2014 Rendered to: Natural Light Energy Systems Phoenix, Arizona PRODUCT TYPE: Tubular Daylight Device
More informationIECRE OPERATIONAL DOCUMENT
IECRE OD-401 IECRE OPERATIONAL DOCUMENT Edition 4.0 2019-01-28 Deleted: 3 Deleted: 05 Deleted: 10 IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications
More informationCertificate Surveillance audit
Certificate Surveillance audit The quality management System of the Company Manufacturer: R. STAHL Schaltgeräte GmbH Address: Am Bahnhof 30, 74638 Waldenburg, Germany 7 Site(s) of manufacture: R. STAHL
More informationTable of Contents FOREWORD... 3 INTRODUCTION SCOPE NORMATIVE REFERENCES DEFINITIONS AND ABBREVIATIONS REQUIREMENTS...
TITLE SPECIFICATION FOR PHOTOELECTRIC CONTROL UNITS (PECUs) REFERENCE REV DATE: JUNE 2017 PAGE: 1 OF 16 REVISION DATE: Table of Contents FOREWORD... 3 INTRODUCTION... 4 1 SCOPE... 4 2 NORMATIVE REFERENCES...
More informationAnnex to declaration of accreditation (scope of accreditation) Normative document: EN ISO/IEC 17065:2012 Registration number: C 001
This annex is valid from: 22-11-2017 to 01-05-2018 Replaces annex dated: 03-11-2017 Voluntary suspension for the crossed out activities as 03-11-2017 Meander 1051 6825 MJ Arnhem The Netherlands Location(s)
More informationGASTEC QA. Approval Requirements 31-1
KE 31-1 March 2012 GASTEC QA Approval Requirements 31-1 for the GASTEC QA product certificate for Sealing materials for metallic threaded joints in contact with 2nd and 3rd family gases and hot water Part
More informationUL TEST REPORT AND PROCEDURE
Issue Date: 2010-12-01 Page 1 of 16 Report Reference # E252373-A31-UL UL TEST REPORT AND PROCEDURE Standard: Certification Type: CCN: Product: Model: Rating: UL 60950-1, 2nd Edition, 2014-10-14 (Information
More informationBRL-K774/ Evaluation guideline. for the Kiwa product certificate for Compression fittings to tighten with matching clamping device
01-02-2012 Evaluation guideline for the Kiwa product certificate for Compression fittings to tighten with matching clamping device Preface This evaluation guideline has been accepted by the board of experts
More information