BULGARIAN ACCREDITATION SERVICES ACCREDITED ACCORDING TO BDS EN/ISO 17020:2005
|
|
- Ezra Campbell
- 5 years ago
- Views:
Transcription
1 BULGARIAN ACCREDITATION SERVICES CERTIFICATE FOR ACCREDITATION MULTITEST LTD Inspection Body of Type A Headquartered in Varna, West Industrial Zone, 1, Atanas Dalchev str., p.o.b. 161 UIC: SCOPE OF ACCREDITATION To carry out inspection of: Welded metallic joints of pressure equipment; Welded joints of piping, oil and oil product pipelines; Welded joints of gas pipelines and associated equipment of metallic transporting and distributing pipelines, and natural gas equipment, installations and appliances; Permanent joints of gas equipment and installations for liquefied petroleum gases; Metallic and reinforced concrete structures and related components, including components of heat and water supplying systems, gas equipment and installations, hoisting equipment, hoisting and transport facilities, pressure vessels and equipment: Type, size and location of imperfections RT; Type, size and location of imperfections, wall thickness UT; Type, size and location of surface and subsurface indications MT; Type, size and location of indications, surface breaking PT; Type, size and location of imperfections, deviations from geometric dimensions VT; Percentage of chemical elements by optical emission spectral analysis ACCREDITED ACCORDING TO BDS EN/ISO 17020:2005 Order No. 1039/ is integral part of this accreditation certificate, total number of pages 6. BAS reg. No. 267 OKA Expiry date: Executive director: Eng. Elza Yaneva Sofia
2 REPUBLIC OF BULGARIA Executive Agency Bulgarian Accreditation Services ORDER No Sofia, By virtue of Article 10, Paragraph 1, Item 2, in connection with Article 20, Paragraph 6 of the Law of National Accreditation of Conformity Assessment Bodies and of Accreditation Procedure BAS QR 2 in connection with open procedure reg. No. 289-ОК/ , assessment report No. 289-ОК- 8/В/ , opinion of Accreditation Committee No. 289-ОК-12/В/ , letter ref. Nos. 7996/ (our incoming ref. No. 289-ОК/20/П/ ) and ref No. 8034/ (our incoming ref. No. 289-ОК/21/Е/ ), report incoming No. 289-ОК/22/В/ To carry out inspection of: Field of inspection I ACCREDIT Inspection Body of Type A AT MULTITEST LTD Headquartered in Varna, West Industrial Zone, 1, Atanas Dalchev str., p.o.b. 161 Type of inspection Scope of inspection to parameters Methods and procedures as: norm, standard, specification and/or internal procedure New and/or in service objects/equipment /products Welded metallic joints of pressure equipment; Welded joints of piping, oil and oil product pipelines; Welded joints of gas pipelines and associated equipment of metallic transporting and distributing pipelines, and natural gas equipment, installations and appliances; Permanent joints of gas equipment and installations for liquefied petroleum gases; Metallic and reinforced concrete structures and related components, including components of heat and water supplying systems, gas equipment and installations, hoisting equipment, hoisting and transport facilities, pressure vessels and equipment Type, size and location of imperfections 1. Radiographic inspection WQP ODSOPE (published in State Gazette, issue 64, dated ) - art. 19, art.21. ODSOOOPP (published in State Gazette, issue 104/ ) - art. 7, art. 25, art.26 Gazette, issue 67, dated ) - art. 6, art,9, art.127. ODSOGEILPG (published in State Gazette, issue 82/ ) - art.105 BDS EN BDS EN BDS EN BDS EN BDS EN 448 BDS EN 489 BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN 444 BDS EN 1435 BDS EN ISO BDS EN 12681
3 Type, size and location of imperfections Wall thickness BDS EN BDS EN Ultrasonic inspection WQP ODSOPE (published in State Gazette, issue 64, dated ) - art. 19, art.21 ODSOGEILPG (published in State Gazette, issue 82/ ) - art. 105 ODSOOOPP (published in State Gazette, issue 104/ ) - art.7, art.25, art. 26 Gazette, issue 67, dated ) - art.6, art.9, art.127. BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN ISO BDS EN ISO BDS EN ISO Ultrasonic inspection WQP ODSOPE (published in State Gazette, issue 64, dated ) - art. 19 ODSOOOPP (published in State Gazette, issue 104/ ) - art. 7, art.25, art.26 ODSOGEILPG (published in State Gazette, issue 82/ ) - art.105 BDS EN EA BAS Order No.1039/ Page 2/5
4 Type, size and location of surface and subsurface indications Type, size and location of surface breaking indications Type, size and location of imperfections, deviations from geometric dimensions BDS EN Magnetic particle inspection WQP ODSOPE (published in State Gazette, issue 64, dated ) - art. 20, art.21. Gazette, issue 67, dated ) - art.6, art.9, art.127 BDS EN BDS EN ISO BDS EN 1369 BDS EN ISO BDS EN BDS EN ISO BDS EN ISO BDS EN ISO Liquid penetrant inspection WQP ODSOPE (published in State Gazette, issue 64, dated ) - art. 20, art.21. Gazette, issue 67, dated ) - art.6, art.9, art.127 BDS EN BDS EN ISO BDS EN BDS EN BDS EN BDS EN ISO BDS EN ISO BDS EN ISO Visual inspection WQP ODSOPE (published in State Gazette, issue 64, dated )- art.19, art.21 Gazette, issue 67, dated ) - art.6, art.9, art.127. BDS EN BDS EN BDS EN BDS EN BDS EN 334 EA BAS Order No. 1039/ Page 3/5
5 Percentage of chemical elements С, Si, Mn, Р, S, Cr, Мо, Ni, Аl, Со, Сu, Nb, Ti, V in metals of Fe base and Percentage of chemical elements Zn, Pb, Sn, Mn, Fe, Ni, Si, Al in metals of Cu base I ORDER BDS EN ЕN BDS EN BDS EN BDS EN ISO BDS EN Spectral analysis by optical emission WQP ODSOOOPP (published in State Gazette, issue 104/ ) - Art. 25 Stahlschluessel 2010 BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN BDS EN That an Accreditation Certificate is issued with reg. No. 267 ОКА dated , and validity to , with this order as appendix being integral part of it. The Accreditation Certificate and its appendix shall be received by the General Manager of Multitest Ltd, Varna, the Head of the Inspection Body of Type A or other authorized person in the premises of EA BAS. This order shall be communicated to the legal entity/sole trader within 3 (three) days from its issue. Eng. ELZA YANEVA Executive Director of EA BAS EA BAS Order No.1039/ Page 4/5
6 1. ODSOPE (published in State Gazette, issue 64, dated ) - Ordinance on the design, safe operation and technical surveillance of pressure equipment (published in State Gazette, issue 64, dated ) 2. ODSOOOPP (published in State Gazette, issue 104/ ) - Ordinance on the design and safe operation of oil and oil product pipelines (published in State Gazette, issue 104/ ) 3. Gazette, issue 67, dated ) - Ordinance on the design and safe operation of transporting and distributing gas pipelines, and natural gas equipment, installations and appliances (published in State Gazette, issue 67, dated ) 4. ODSOGEILPG (published in State Gazette, issue 82/ ) - Ordinance on the design, safe operation and technical surveillance of gas equipment and installations for liquefied petroleum gases (published in State Gazette, issue 82/ ) 5. Technical Specofocation; EA BAS Order No. 1039/ Page 5/5
Innovations in the Field of Noise and Vibrations by Spectri Ltd.
Bulgarian Society for NDT International Journal NDT Days Volume 1, Issue 3, Year 2018 ISSN: 2603-4018 Innovations in the Field of Noise and Vibrations by Spectri Ltd. More info about this article: http://www.ndt.net/?id=23980
More informationAnnex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : İçerenköy Mah. Umut Sk. E5 Yanyol Üzeri AND Binası No:12 İç Kapı No :4 Ataşehir/ 34752 İSTANBUL/TÜRKİYE Phone : 0 216 651 08
More informationProforma for Surveillance of Recognized Environmental Laboratory under the Environment (Protection) Act, 1986
Ministry of Environment & Forests, New Delhi Central Pollution Control Board, Delhi Proforma for Surveillance of Recognized Environmental Laboratory under the Environment (Protection) Act, 1986 Surveillance
More informationElite Safety Consultants. Your One Stop Safety Solution Provider Safety: It s a choice and not a chance. A glimpse at our Profile
Your One Stop Safety Solution Provider Safety: It s a choice and not a chance A glimpse at our Profile We have been accredited by (DAC) Dubai Accreditation Centre of Dubai Municipality List of Accredited
More informationGASTEC QA. Approval Requirements 31-2
KE 31-2 March 2012 GASTEC QA Approval Requirements 31-2 for the GASTEC QA product certificate for Sealing materials for metallic threaded joints in contact with 2nd and 3rd family gases and hot water Part
More informationGASTEC QA. Approval Requirements 31-1
KE 31-1 March 2012 GASTEC QA Approval Requirements 31-1 for the GASTEC QA product certificate for Sealing materials for metallic threaded joints in contact with 2nd and 3rd family gases and hot water Part
More informationSound absorption coefficient Equivalent sound absorption area Sound absorption coefficient Sound absorption class
Annex 1 to the Accreditation Certificate No. LA.01.028 issued on 18-12-2015, approved on 18-12-2015 by the Order No. AK-200 of Director of National Accreditation Bureau under the Ministry of 1 (8) pages
More information10.6 Schedule of Accreditation
Inspection Body Accreditation is accredited by the GCC Accreditation Center () in accordance with the recognized International Standard, Conformity assessment requirements for the operation of various
More informationAnnex of the Certificate (Page 1/7) Scope of Accreditation
Annex of the Certificate (Page 1/7) Scope of Accreditation As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone : 0 216 313 14 20 Fax : 0 216
More informationTest procedure/ method identification IP 100 (ISO 9096, ČSN EN )
Page 1 of 7 All tests and sampling performed by the laboratory meet the requirements for periodic emission measurement according to ČSN P CEN/TS 15675:2009. The Laboratory is qualified to update standards
More informationCERTIFICATE OF CONFORMITY No. TC RU С- DE.AB72.B.02315 Series RU No. 0492042 CERTIFICATION AUTHORITIES Certification authority of products of "Scientific and Technical Center "Techno-standard Limited Liability
More informationValves for natural gas transportation in pipelines Performance requirements and tests
SVENSK STANDARD SS-EN 14141 Fastställd 2003-12-19 Utgåva 1 Rörledningsarmatur Ventiler för rörledningar för naturgas Funktionskrav och provning Valves for natural gas transportation in pipelines Performance
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14141:2004 Valves for natural gas transportation in pipelines - Performance requirements and tests Valves for natural gas transportation in pipelines - Performance requirements and
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland Precisely Right. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000028731 01 Certified AMS: Manufacturer: Test lnstitute: D-R 800 for dust DUFUG GmbH Kollaustraße 105 22453 Hamburg
More informationTitle. Author(s)Yoshida, Fumikazu; Yoshida, Haruyo. Issue Date Doc URL. Type. File Information
Title New directions for the Japanese system of e-waste re Author(s)Yoshida, Fumikazu; Yoshida, Haruyo CitationSeventh International Conference on Waste Management Issue Date 2012-09 Doc URL http://hdl.handle.net/2115/54737
More informationDEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID. NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5 of 2008)
STAATSKOERANT, 19 NOVEMBER 2010 No.33763 11 No. R. 1072 DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID 19 November 2010 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act 5
More informationGlenside Environmental Services Ltd
Unit 18 Great Island Industrial Park, Ballincollig, Co. Cork. Testing Laboratory Registration number: 322T is accredited by the Irish National Board (INAB) to undertake testing as detailed in the Schedule
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. August 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC August 2015 Issued on 4 September 2015 Page 1 Information Procedure on Standards Notifications registered
More informationPressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
D. EVALUATION ASSESSMENT PROCEDURES Guideline D-01 Guideline related to: Annex III, module G Is design approval by a notified body required under module G? Module G does not explicitly require formal design
More informationGlass fibre rovings - Non-metallic materials
CLASS PROGRAMME Type approval DNVGL-CP-0082 Edition December 2015 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10893-5 First edition 2011-04-01 Non-destructive testing of steel tubes Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection
More informationGASTEC QA. Approval Requirements 15. for the GASTEC QA product certificate for Steel pipes and sockets for the transport of gas. KE 15 January 2012
KE 15 January 2012 GASTEC QA Approval Requirements 15 for the GASTEC QA product certificate for Steel pipes and sockets for the transport of gas Foreword These GASTEC QA Approval requirements have been
More informationCZ-CPA code CSNEN CPNBÚ CSNEN ISO/IEC 17067:2014 scheme la, lb, 5 CP NBÚ CSNEN ISO/IEC 17067:2014 scheme 3 CPNBÚ
Product Certification Body number 1* Windows, balcony doors and their frames, doors and their frames, frames and thresholds, of wood 2* Products of other builder's carpentry and joinery, of wood 3* Prefabricated
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14163:2002 Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines Petroleum and natural gas industries - Pipeline transportation systems - Welding
More informationINSPECTION REPORT Nr IDD/S-09/922
Page: 1/7 PROJECT: TPI For Sheet Pile BV Client: Manufacturer: Nanjing Grand Steel Piling Co., Ltd. Inspection requested by: Ref: P/o nr: (client to BV) P/o nr: GP09111101 (client to Manufacturer) SUPPLY
More informationTSSA Fuels Safety High Pressure Piping Code, TSSA HPP-2017 November 2017
TSSA Fuels Safety High Pressure Piping Code, TSSA HPP-2017 November 2017 Technical Standards and Safety Authority Fuels Safety Program 345 Carlingview Drive Toronto, ON M9W 6N9 Tel: 1.877.682.8772 Fax:
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland{ ' Precisely Föght CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000038496_01 AMs designation: Manufacturer: Test Laboratory: PCME QAL 181 fortotaldust PCME Ltd. 60 Edison Road
More informationSCESm Directory Accreditation number: SCESm 0013
International standard: ISO/IEC 17021-1:2015 Swiss standard: SN EN ISO/IEC 17021-1:2015 Swiss Safety Center AG Certifications Richtistrasse 15 8304 Wallisellen Head: Responsible for MS: Heinrich A. Bieler
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14420-4:2005+A1:2007 Hose fittings with clamp units - Part 4: Flange connections Hose fittings with clamp units - Part 4: Flange connections EESTI STANDARDIKESKUS EESTI STANDARDI
More informationGASTEC QA. Approval Requirements 200. for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE)
KE 200 March 2012 GASTEC QA Approval Requirements 200 for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE) Foreword These GASTEC QA Approval requirements have
More informationRENAR Accreditation Activities
RENAR accreditation activities represent the scopes where RENAR has competence to provide accreditation services. RENAR defined its accreditation activities in accordance with the EA MLA scope (EA multilateral
More informationSCESm Directory Accreditation number: SCESm 0013
International standard: ISO/IEC 17021-1:2015 Swiss standard: SN EN ISO/IEC 17021-1:2015 Swiss Safety Center AG Certifications Richtistrasse 15 8304 Wallisellen Head: Responsible for MS: Heinrich A. Bieler
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Koolwaterststraat 1 6161 RA Geleen The Netherlands Location Abbreviation/ location code Koolwaterststraat 1 6161 RA Geleen The
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA, INC. 7250 Hudson Blvd., Suite 100 Oakdale, MN 55128 Jay Kogoma or Michelle Loeffler Phone 651 730 1188 ELECTRICAL Valid to: February
More informationGovernment Gazette Staatskoerant
Government Gazette Staatskoerant REPUBLIC OF SOUTH AFRICA REPUBLIEK VAN SUID AFRIKA Regulation Gazette No. 10177 10701 Regulasiekoerant Regulation Gazette Vol. 621 24 March Maart 2017 No. 40713 PART 1
More informationCONSTRUCTION PRODUCTS REGULATION MOLEX CES COPPER AND FIBRE CABLE
CONSTRUCTION PRODUCTS REGULATION MOLEX CES COPPER AND FIBRE CABLE Carol Harris, EMEA Product Manager WHITE PAPER Molex Connected Enterprise Solutions EXECUTIVE SUMMARY Combustible construction materials
More informationASME/ANSI Interpretations No. 6. Replies to Technical Inquiries July 1, 1987, Through April 30, 1988
ASME/ANSI831.3 Interpretations No. 6 Replies to Technical Inquiries July 1, 1987, Through April 30, 1988 Gener~1 Inform~tion It has been agreed to publish interpretations issued by the 831 Committee concerning
More informationRULEBOOK ON ELECTROMAGNETIC COMPATIBILITY
RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY ("Official Gazette of RS, issue No. 13/2010) I INTRODUCTION Scope Article 1 This Rulebook stipulates the essential requirements that shall be met with regard to
More informationManagement Systems Certification Ltd
Management Systems Certification Ltd 48 South Street, New Ross, Co. Wexford Management Systems Certification Body Registration number: 5011 is accredited by the Irish National Board (INAB) to undertake
More informationDeclaration of Conformity
Declaration of Conformity DEMONSTRATION OF CONFORMITY WITH RECOGNIZED STANDARDS TO SATISFY THE SAFETY AND EFFECTIVENESS REQUIREMENTS OF THE CANADIAN MEDICAL DEVICES REGULATIONS Name of the medical device
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHENZHEN ZHONGJIAN NANFANG TESTING CO., LTD. 1 No. B-C, 1/F., Building 2, Laodong No.2 Industrial Park, Xixiang Road, Bao an District, Shenzhen, Guangdong,
More informationCO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.017 Version 2 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group
More informationA Notification under Article 12 of Regulation (EU) No 1025/2012 1
EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Sustainable Growth and EU 2020 Standards for Boosting Competitiveness Brussels, 02/07/2014 A Notification under Article 12 of Regulation
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61429 First edition 1995-12 Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 This English-language version is derived from the original
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 334:2005 Gaasirõhuregulaatorid sisendrõhule kuni 100 baari Gas pressure regulators for inlet pressures up to 100 bar EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD
More informationCertificate: _01 / 22 March 2013
Test report: 936/21219384/B of 27 September 2012 Initial certification: 20 July 2012 Expiry date: 19 July 2017 Publication: BAnz AT 05 March 2013 B10, chapter I, No. 1.5 Approved application The tested
More informationINTERNATIONAL STANDARD
IEC 61073-1 INTERNATIONAL STANDARD Edition 4.0 2009-01 Fibre optic interconnecting devices and passive components Mechanical splices and fusion splice protectors for optical fibres and cables Part 1: Generic
More informationDESIGN, OPERATION & MAINTENANCE MANUAL
Powder fire extinguishing module MPFE(b)-15-I-GE-UZ TU 4854-002-73334499-2004 15И DESIGN, OPERATION & MAINTENANCE MANUAL Buran-15I MPFE(b)-15.00.00.000RE 1. DESIGNATION 1.1. Powder extinguishing module
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 63A Issue date 16 th June 2015 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44 (0)1244
More informationINTERNATIONAL STANDARD
IEC 61892-7 INTERNATIONAL STANDARD Edition 2.0 2007-11 Mobile and fixed offshore units Electrical installations Part 7: Hazardous areas INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE XA ICS 47.020.60
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60076-11 First edition 2004-05 Power transformers Part 11: Dry-type transformers This English-language version is derived from the original bilingual publication by leaving out
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SONY GLOBAL MANUFACTURING & OPERATIONS CORPORATION EMC/RF TEST LABORATORY - MAIN LAB 8-4 Shiomi Kisarazu-shi Chiba-ken, 292-0834, Japan Mr. Koichi.Hiyaoka Phone:
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Location Certification Scheme Edisonstraat 12A 6902 PK Zevenaar The Netherlands
More informationContents. EN :2012 (E) Issue 5 ( ) Page
Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...
More informationStandardization Programme ( ) Building & Construction Standards Committee
Standardization Programme (2012-2013) Building & Construction Standards Committee Projects Title 2012 2013 Jul Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec 1 EN 12811: 2 EN 197-1:2011
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC February 2015 Issued on : 6 March 2015 Page 1 Information Procedure on Standards Notifications registered
More informationBelcom Cable excellence engineered through quality. CPR Construction Products Regulation
CPR Construction Products Regulation Index Construction Products Regulation... 3 What is the Construction Products Regulation (CPR)... 4 What is the objective of the CPR... 4 Who does the application of
More informationISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements
INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number
More informationGASTEC QA. Approval Requirements 69-1
KE 69-1 May 2014 GASTEC QA Approval Requirements 69-1 for the GASTEC QA product certificate for Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings Foreword
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61784-5-14 Edition 1.0 2010-07 colour inside Industrial communication networks Profiles Part 5-14: Installation of fieldbuses Installation profiles for CPF 14 IEC 61784-5-14:2010(E)
More informationDECLARATION OF CONFORMITY FOR THE MEDICAL DEVICE FAMILY LOW-PRESSURE HOSE ASSEMBLIES FOR USE WITH MEDICAL GASES
FLOW METER S.p.A. Capitale Sociale: 234.000 int. versato Sede legale: Via del Lino, 6-24040 LEVATE (Bg) Amministrazione e Stabilimenti: Via del Lino, 6-24040 LEVATE (Bg) Tel. +39/035/594047 - Telefax +39/035/594821
More informationUniversity of Minnesota Nano Fabrication Center Standard Operating Procedure
Equipment Name: Ion Mill Coral Name: ionmill Revision Number: 4 Model: Intlvac Revisionist: K. Roberts Location: Bay 3 Date: 09/17/2013 1 Description The Intlvac Ion Mill is used for non-chemical etching
More informationAustralian/New Zealand Standard
AS/NZS 1337.1:2010 (Incorporating Amendment No. 1) AS/NZS 1337.1:2010 Australian/New Zealand Standard Personal eye protection Part 1: Eye and face protectors for occupational applications AS/NZS 1337.1:2010
More informationTABLE OF CONTENTS. 1.0 INTRODUCTION Scope References Test Specimen Description Summary 1
Page No. TOC-i TABLE OF CONTENTS Page No. 1.0 INTRODUCTION 1 1.1 Scope 1 1.2 References 1 1.3 Test Specimen Description 1 1.4 Summary 1 2.0 TEST PROCEDURES AND RESULTS 2 2.1 High Temperature Test 2 2.2
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC November 2010 Issued on: 2 December 2010 Chapter I: Register of new notifications
More informationBUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
More informationGASTEC QA. Approval Requirements 136
KE 136 January 2012 GASTEC QA Approval Requirements 136 for the GASTEC QA product certificate for Polyethylene (PE) valves for plastic piping systems for the supply of gaseous fuels Foreword These GASTEC
More informationSELF PRESERVATION SOCIETY By Jim Creak
SELF PRESERVATION SOCIETY By Editor of the Means of Escape Magazine and Chairman of The Health & Safety Signs Association. w w w. m e a n s - of- e s c a p e. c o m Agenda Regulatory Reform Fire Safety
More informationMINISTRY OF THE INTERIOR CHIEF-DIRECTORATE FIRE SAFETY AND CIVIL PROTECTION DISASTERS RESPONSE AND UNIFIED RESCUE SYSTEM
MINISTRY OF THE INTERIOR CHIEF-DIRECTORATE FIRE SAFETY AND CIVIL PROTECTION DISASTERS RESPONSE AND UNIFIED RESCUE SYSTEM LAW ON THE MoI CHIEF DIRECTORATE FIRE SAFETY AND CIVIL PROTECTION - MoI With the
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC May 2018 Issued on : 1 June 2018 Page 1 Information Procedure on Standards Notifications registered
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. F2 LABS Peters Road Middlefield, OH Wendy Fuster Phone: Ext.
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 F2 LABS 16740 Peters Road Middlefield, OH 44062 Wendy Fuster Phone: 301 253 4500 Ext. 101 ELECTRICAL (EMC) Valid To: November 30, 2019 Certificate Number: 0793.02
More informationsafety requirements are to comply with this compulsory specification twelve (12) months after the publication of this notice.
28 No. 38232 GOVERNMENT GAZETTE, 28 NOVEMBER 2014 DEPARTMENT OF TRADE AND INDUSTRY DEPARTEMENT VAN HANDEL EN NYWERHEID No. 944 28 November 2014 NATIONAL REGULATOR FOR COMPULSORY SPECIFICATIONS ACT (Act
More informationSCESm Directory Accreditation number: SCESm 0047
International standard: ISO/IEC 17021-1:2015 Swiss standard: SN EN ISO/IEC 17021-1:2015 QS Zürich AG Postfach 6335 8050 Zürich QS Zürich AG Branch Basel Erlenstrasse 31 4106 Therwil Head: Responsible for
More informationWATER HEATERS.
WATER HEATERS www.metacomm-bih.com WATER HEATERS Water heaters are designed for heating hot water, and can serve as energy accumulators in classical and solar systems. Heating medium - hot water or steam
More informationCOUNTRY REPORT Slovak Republic (Observer) 9 th meeting of representatives from CEFTA countries responsible for conformity assessment
COUNTRY REPORT Slovak Republic (Observer) 9 th meeting of representatives from CEFTA countries responsible for conformity assessment Sofia, 7 th April 2006 1. Tasks and position of the Office in the field
More informationStandardization, conformity attestation and accreditation in the Republic of Belarus. Valery N. Koreshkov, Chairman of Gosstandart
Standardization, conformity attestation and accreditation in the Republic of Belarus Valery N. Koreshkov, Chairman of Gosstandart Development of standardization in the Republic of Belarus is based on:
More informationWORK PACKAGE 4 DELIVERABLE D.T4.1.4
WORK PACKAGE 4 DELIVERABLE D.T4.1.4 Strategy to facilitate the integration of Dynamic Lighting into EN 13201 and related regulations Version 1 10-2017. 1. Introduction According to the Technical Report
More informationCertificate: _01 / 29 April 2014
Test report: 936/21212540/D of 08 October 2013 Initial certification: 05 March 2013 Expiry date: 04 March 2018 Publication: BAnz AT 01 April 2014 B12, chapter I, No. 2.2 Approved application The tested
More informationBRAZED PLATE HEAT EXCHANGERS
BRAZED PLATE HEAT EXCHANGERS MOUNTING AND OPERATION MANUAL Contents Mounting and operation manual of brazed plate heat exchangers... 2 1. General information...3 2. Safety instructions...3 3. Installing
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC April 2015 Issued on 4 May 2015 Page 1 Information Procedure on Standards Notifications registered
More informationTesting coated fabrics
BRITISH STANDARD BS 3424-12: 1996 ISO 1419:1995 Incorporating Amendments Nos. 1 and 2 Testing coated fabrics Part 12: Accelerated ageing tests ICS 59.080.40 Committees responsible for this British Standard
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61892-6 First edition 1999-02 Mobile and fixed offshore units Electrical installations Part 6: Installation Unités mobiles et fixes en mer Installations électriques Partie 6:
More informationTECHNICAL APPROVAL. TA no.: AT/ Edition V/2015 Date of expiry: 25 November 2020 Page: 1 of 14
APPROVAL BODY INSTYTUT NAFTY I GAZU PAŃSTWOWY INSTYTUT BADAWCZY OIL AND GAS INSTITUTE - NATIONAL RESEARCH INSTITUTE (INiG-PIB) PL 31-503 Kraków, ul. Lubicz 25 A tel.: +48 12 4210033 fax: +48 12 4210050
More informationTEST REPORT Page 1 of 28. Uçar Oyuncak San.ve Tic.Ltd.Şti.
TEST REPORT Page 1 of 28 REPORT NUMBER : TURT120014744-REVISED 04 APPLICANT NAME ADDRESS BUYER Uçar Oyuncak San.ve Tic.Ltd.Şti. Hadımköy Ömerli Mah.İstanbul Yolu Cad. No:195 Arnavutköy İstanbul TÜRKİYE
More informationTECHNICAL REPORT IEC/TR Fibre optic communication system design guides Part 11: Multimode launch conditions. Edition 1.
TECHNICAL REPORT IEC/TR 61282-11 Edition 1.0 2012-05 Fibre optic communication system design guides Part 11: Multimode launch conditions INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE CODE V ICS 33.180.01
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC January 2012 Issued on : 02 February 2012 Page 1 Directive 98/34/EC Information
More informationCertificate: _01 / 22 March 2013
Test report: 936/21219384/A of 27 September 2012 Initial certification: 20 July 2012 Expiry date: 19 July 2017 Publication: BAnz AT 05 March 2013 B10, chapter I, No. 1.6 Approved application The tested
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-29193-8 Edition 1.2 IEC 60432-1:2012 Edition 2.2 SOUTH AFRICAN NATIONAL STANDARD Incandescent lamps Safety specifications Part 1: Tungsten filament lamps for domestic and similar general
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC February 2017 Issued on : 3 March 2017 Page 1 Information Procedure on Standards Notifications registered
More informationJoint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania
page 1 (13) Joint Stock Company Alzida Savanorių pr. 221, LT- 02300 Vilnius, Lithuania SCOPE OF ACCREDITATION (flexible) No. Name of the testing object Name of the parameters (characteristics) to be tested
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61280-1-3 Edition 2.0 2010-03 Fibre optic communication subsystem test procedures Part 1-3: General communication subsystems Central wavelength and spectral width measurement
More informationCEN System Delegated Decisions Dispatch 33:2016
2016-08-16 Page 1 CEN System Delegated Decisions Dispatch 33:2016 1 CEN/TC 127 Correspondence... 1 2 CEN/TC 147 Correspondence... 9 3 CEN/TC 160 Correspondence... 10 4 CEN/TC 182 Correspondence... 12 5
More informationThis document is a preview generated by EVS
TECHNICAL REPORT IEC TR 60825-14 First edition 2004-02 Safety of laser products Part 14: A user's guide Reference number IEC/TR 60825-14:2004(E) Publication numbering As from 1 January 1997 all IEC publications
More informationGENERAL FIRE SAFETY TERMS & DEFINITIONS
UCL Fire Technical Note - TN006 Fire Safety Technical Guide GENERAL FIRE SAFETY TERMS & DEFINITIONS Reference: BS4422-2005 Fire Safety Vocabulary - for further information and definitions BS EN ISO 13943-2000:
More informationGUIDELINES FOR DESCRIBING THE ACCREDITATION SCOPES OF TESTING LABORATORIES
ATS-UP03 GUIDELINES FOR DESCRIBING THE ACCREDITATION SCOPES OF TESTING LABORATORIES Reviewed by: Natalija Jovičić Zarić MSc, Quality Manager (QM) Approved by: Dejan Krnjaić PhD, Director Issue/Revision:
More informationTRG 5-53 TRG 5-54 TRG 5-55 TRG 5-57
GESTRA GESTRA Steam Systems TRG 5-53 TRG 5-54 TRG 5-55 TRG 5-57 EN English Installation & Operating Instructions 810428-05 Temperature Sensor TRG 5-53, TRG 5-54, TRG 5-55, TRG 5-57 1 Contents Application
More informationDECLARATION OF PERFORMANCE. No EN
DECLARATION OF PERFORMANCE No. 0021 EN 1. Unique identification code of the product-type: Rebar connection with fischer injection mortar FIS EM 2. Intended use/es: Product Mortar for post-installed rebar
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC May 2017 Issued on : 2 June 2017 Page 1 Information Procedure on Standards Notifications registered
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 INTERTEK TESTING SERVICES NA INC. 1950 Evergreen Blvd., Suite 100 Duluth, GA 30096 Gary Flom Phone 678 775 2334 ELECTRICAL Valid To: March 31, 2020 Certificate
More information