Fire Safety Products. Conventional Detection Audible/Visible Notification HVAC Systems Monitoring Sprinkler Systems Monitoring

Transcription

1 F U L L - L I N E P R O D U C T G U I D E Fire Safety Products Conventional Detection Audible/Visible Notification HVAC Systems Monitoring Sprinkler Systems Monitoring

2 At System Sensor, innovation is more than an ideal; innovation is our way of life. Every day we design new products that are convenient to install and efficient to operate, providing our customers with the highest level of reliability. In other words, we make it our business to develop advanced ideas that deliver advanced solutions. This product guide is divided into four areas: Conventional Detection a complete line of smoke detectors led by the innovative i 3 Series. Audible/Visible Notification the SpectrAlert Advance line, the industry s newest, most refined series of notification devices. HVAC Systems Monitoring the Innovair line and other specialty detectors designed to detect smoke in air duct networks. Sprinkler Systems Monitoring products designed to sense the flow of water through pipes, switches and valves. Conventional Detection i 3 Series Photoelectric Smoke Detectors Installation ease, intelligence and instant inspection are the guiding principles of the System Sensor i 3 Series photoelectric smoke detectors. The i 3 Series is a complete line standard, sounder, auxiliary Form C relay and isolated thermal models featuring plug-in bases, removable covers, remote maintenance signaling, drift compensation and smoothing algorithms, green and red LEDs, and simplified sensitivity measurement. Loop Type Thermal Sounder Form C Relay Operating Voltage Avg. Standby Current Max. Alarm Current 2W-B 2-wire No No No VDC 50 µa 130 ma limited by control panel 2WT-B 2-wire Yes No No VDC 50 µa 130 ma limited by control panel 4W-B 4-wire No No No VDC 50 µa 23 ma 4WT-B 4-wire Yes No No VDC 50 µa 23 ma 2WTA-B 2-wire Yes Yes No VDC 50 µa 130 ma* 2WTR-B 2-wire Yes No Yes VDC 50 µa 130 ma limited by control panel 4WTA-B 4-wire Yes Yes No VDC 50 µa 35 ma 4WTR-B 4-wire Yes No Yes VDC 50 µa 35 ma 4WTAR-B 4-wire Yes Yes Yes VDC 50 µa 50 ma 4WITAR-B 4-wire Isolated Yes Yes VDC 50 µa 50 ma * In direct power (non-reverse polarity), the maximum alarm current is 130 ma limited by the panel. In reverse polarity power, the maximum current is 30 ma for the 2WTA-B in alarm; 12 ma for all other 2WTA-B units on the loop. Add 25 ma for the RRS-MOD reversing relay alarm current. 100 Series Plug-in Smoke Detectors The 100 Series low profile plug-in smoke detectors are ideal for light commercial applications. Offered with a photoelectric sensor, the 100 Series units may be installed with a range of plug-in bases to accommodate a variety of wiring configurations and voltages. Detection Type Wiring Thermal Operating Voltage Avg. Standby Current Max. Alarm Current 2151 Photoelectric Mounting base dependent No See bases 85 µa Mounting base dependent 2151T Photoelectric Mounting base dependent Yes See bases 85 µa Mounting base dependent 1

3 400 Series Plug-in Electronic Heat Detectors The 400 Series plug-in electronic heat detector offers thermal detection in a 135 F combination fixed/ rate-of-rise configuration. The 5451 detector may be installed with a range of 400 Series plug-in bases. Temperature Rating Activation Method Max. Standby Current degrees F Fixed/Rate-of-rise 100 µa 100 Series Plug-in Smoke Detector Bases The 100 Series bases are designed for use with the System Sensor 100 Series plug-in smoke detectors and accommodate 2- or 4-wire loops and 12, 24 or 120 operating voltages to address a broad range of applications. Loop Type Operating Voltage Alarm Current B110LP 2-wire 12/24 VDC ma limited by the control panel B110RLP 2-wire 24 VDC ma B112LP 4-wire 24 VDC ma B114LP 4-wire 120 VAC 75 ma (AC) maximum B116LP 2-wire 24 VDC ma limited by the control panel 400 Series Plug-in Smoke Detector Bases The 400 Series bases are designed for use with System Sensor 400 Series and 100 Series plug-in smoke detectors and are offered in a variety of models for 2- or 4-wire loops and 12, 24 or 120 operating voltages. Loop Type Alarm Contact Type Operating Voltage Max. Alarm Current B401 2-wire 12/24 VDC ma limited by the control panel B401B 2-wire 12/24 VDC ma limited by the control panel B401BR 2-wire 24 VDC ma B402B 4-wire Form A & C 24 VDC ma B404B 4-wire Form A & C + A supervisory 120 VAC 75 ma (AC) maximum B406B 2-wire Form C 24 VDC ma limited by the control panel CO1224T Carbon Monoxide Detector The CO1224T detector with RealTest is the industry s first carbon monoxide detector specifically designed for system connection. It is designed to maximize profits and minimize installation costs with code compliant features such as a trouble relay that sends a sensor failure or end-of-life signal to the control panel, and SEMS type terminal Philips-head screws that provide a quick and positive wiring connection while facilitating wiring supervision. The CO1224T unit also features a low current draw, which allows more detectors to be connected to the panel without having to purchase a more expensive panel or extra power supply. 2 Detection Type Wiring Operating Voltage Max. Standby Current CO1224T Electrochemical 4-wire 12/24 VDC 20mA 40mA Max. Alarm Current

4 5600 Series Mechanical Heat Detectors The 5600 Series mechanical heat detectors offer a low-cost means to protect property against fire and for non-life-safety installations where smoke detectors are inappropriate. To accommodate a broad range of applications, the 5600 Series units are available in a full line of configurations. Singleand dual-circuit models are available with low or high temperature ratings and with fixed temperature or combination fixed temperature/rate-of-rise (ROR) activation. Circuit Identification Method on Exterior Temperature Rating Activation Method Reflected Beam Smoke Detector The BEAM1224 Series reflected beam smoke detectors are equipped with both a transmitter and a receiver in one unit. They are easy to install and align with the included reflector. The BEAM1224S model comes with an integral sensitivity test feature. With six sensitivity levels, the BEAM1224 unit can be set to respond accurately in its respective environment. Plus, with multiple accessories ranging from multi-mounting to device heating, the BEAM1224 detector is capable of protecting any high ceiling area. Wiring Operating Voltage Avg. Standby Current Avg. Alarm Current Range Protected Spacing** 5601P Single Non-lettered 135 F (57 C) Fixed/Rate-of-rise 50 feet by 50 feet 5602 Single Lettering 194 F (90 C) Fixed/Rate-of-rise 50 feet by 50 feet 5603 Single Lettering 135 F (57 C) Fixed temperature 25 feet by 25 feet 5604 Single Lettering 194 F (90 C) Fixed temperature 25 feet by 25 feet 5621 Dual Lettering 135 F (57 C) Fixed/Rate-of-rise 50 feet by 50 feet 5622 Dual Lettering 194 F (90 C) Fixed/Rate-of-rise 50 feet by 50 feet 5623 Dual Lettering 135 F (57 C) Fixed temperature 25 feet by 25 feet 5624 Dual Lettering 194 F (90 C) Fixed temperature 25 feet by 25 feet **Refer to NFPA72 guidelines for spacing reductions when ceiling heights exceed 10 feet. BEAM wire VDC 17 ma 24 VDC 38.5 ma 24 VDC ft. (5m to 100m) BEAM1224S 4-wire VDC 17 ma 24 VDC 38.5 ma 24 VDC ft. (5m to 100m) Multi-Voltage Conventional Relays The System Sensor multi-voltage conventional relays are used for high-current switching applications such as fan and damper assembly control, door control, air handling unit controls, and other types of building system interfacing. Description Operating Voltage Operating Current Contact Ratings PR-1 PR-2 PR-3 R-10T R-14T R-20T R-24T R-10E R-14E R-20E R-24E Epoxy encapsulated (SPDT) relay with an activation LED Epoxy encapsulated (SPDT) relay with an activation LED Epoxy encapsulated (SPDT) relay with an activation LED Single (SPDT) relay with an activation LED 4-gang (SPDT) relay with 4 activation LEDs Single (DPDT) relay with an activation LED 4-gang (DPDT) relay with 4 activation LEDs Single (SPDT) relay with an activation LED and steel enclosure 4-gang (SPDT) relay with 4 activation LEDs and steel enclosure Single (DPDT) relay with an activation LED and steel enclosure 4-gang (DPDT) relay with 4 activation LEDs and steel enclosure 120 VAC 15 ma DC 24 VDC, 24 VAC, 120 VAC 24 VDC: 7 A with L/R = 5 ms; 120 VAC: 7 A max. (0.35 PF) 250 VAC: 10 A resistive; 30 VDC: 10 A resistive VDC 30 ma DC max. 120 VAC: 10 A max. (resistive load); 120 VAC: 7 A max. (0.35 PF) 250 VAC: 10 A max. (resistive load); 30 VDC: 10 A max. (resistive load) VDC 30 ma DC max. 120 VAC: 10 A max. (resistive load); 120 VAC: 7 A max. (0.35 PF) 250 VAC: 10 A max. (resistive load); 30 VDC: 10 A max. (resistive load) 20 ma DC 24 VDC, 20 ma DC 24 VDC, 40 ma DC 24 VDC, 40 ma DC 24 VDC, 20 ma DC 24 VDC, 20 ma DC 24 VDC, 40 ma DC 24 VDC, 40 ma DC 24 VDC, 3

5 Conventional Detection Accessories Complementing the line of System Sensor detection products is a host of accessories designed to enhance installation, testing, operation, and maintenance. SENS-RDR RRS-MOD 2W-MOD2 RT A77-AB2 XR2B A77-AB RMK400 SMB600 MOD400R EOLR-1 APA151 BEAMLRK BEAMMMK BEAMSMK BEAMHK BEAMHKR RA400Z RTS451 RTS451KEY Description i 3 series infrared sensitivity reader i 3 series reversing relay / synchronization module i 3 series loop test and maintenance module i 3 series removal/replacement tool i 3 series retrofit adapter bracket 100 series installation/removal tool 100 series retrofit adapter bracket 100/400 series recessed mounting kit 100/400 series surface mount kit 100/400 series field sensitivity test module End of line power supervision relay Remote annunciator with piezo alarm Long-range kit for BEAM1224/BEAM1224S Multi-mount kit for BEAM1224/BEAM1224S Surface-mount kit for BEAM1224/BEAM1224S Heater kit for transmitter/receiver unit Heater kit for reflector Remote annunciator for spot and duct smoke detectors Remote test station accessory Remote test station accessory with key SENS-RDR MOD400R 2W-MOD2 APA151 RTS451KEY Audible/Visible Notification SpectrAlert Advance Wall-Mount Strobes The SpectrAlert Advance wall-mount strobe features a universal mounting plate with plug-in design, 11 field-selectable candela settings, and dual voltage in one device. The amber lens strobes provide the distinctive visual signal used for mass notification during non-fire evacuations. SpectrAlert Advance strobes are listed to UL SW-ALERT and SWH-ALERT amber lens strobes are listed to UL Model numbers with a K suffix are listed to UL 1638 and NEMA 4X for outdoor use. SR SR-P* SR-SP* SRK SRK-R* SRK-P SRH SRH-P* SRHK SRHK-R* SRHK-P SW SW-P* SW-ALERT** SWK SWK-P SWH SWH-P* SWH-ALERT** SWHK SWHK-P Standard High UL Max. Strobe Current Draw (ma RMS) DC FWR DC FWR / NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA * For all SpectrAlert Advance models, a -P suffix denotes plain housing (no FIRE print); -SP denotes FUEGO printed housing. Outdoor units with model numbers ending with -R do not include weatherproof back boxes. Outdoor units with model numbers ending in K do include weatherproof back boxes. ** UL 1971 is not applicable to mass notification devices. Listed candela rating is per UL 1638 on-axis rating. 4

6 SpectrAlert Advance Wall-Mount Horn Strobes The SpectrAlert Advance wall-mount horn strobe is rich with features guaranteed to deliver cost-efficient installation time. Features include universal mounting plate with plug-in design, 11 field selectable candela settings, dual voltage in one product, and rotary switch selectable horn tone and volume settings. SpectrAlert Advance horn strobes are listed to UL 1971 and UL 464. Model numbers with a K suffix are listed to UL 1638 and NEMA 4X for outdoor use. P2R P2R-P* P2R-SP* P2RK P2RK-R* P2RK-P P2RH P2RHK P2RHK-R* P2RHK-P P2RHK-120 UL Max. Current Draw (ma RMS), 2-wire Horn Strobe, Standard Range ( cd) V V DC Input 15 15/ / Temporal High Temporal Medium Temporal Low Non-temporal High P2W P2W-P* Non-temporal Medium Non-temporal Low FWR Input P2WK Temporal High Temporal Medium Temporal Low Non-temporal High Non-temporal Medium Non-temporal Low UL Max. Current Draw (ma RMS), 2-wire Horn Strobe, High Range ( cd) Volts Volts DC Input FWR Input P2WH Temporal High Temporal High P2WH-P* Temporal Medium Temporal Medium Temporal Low Temporal Low P2WHK Non-temporal High Non-temporal High Non-temporal Medium Non-temporal Medium Non-temporal Low Non-temporal Low Description, outdoor, high-candela horn strobe with integral 120V adapter; includes outdoor backbox To calculate current draw for 4-wire horn strobes, add the required strobe current and horn current from the tables below: P4R P4RK P4RK-R* P4RH P4W P4WK P4WHK Standard High UL Max. Strobe Current Draw (ma RMS) DC FWR DC FWR / NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA UL Max. Horn Current Draw (ma RMS) Sound Pattern db DC FWR DC FWR Temporal High Temporal Medium Temporal Low Non-temporal High Non-temporal Medium Non-temporal Low Coded High Coded Medium Coded Low * For all SpectrAlert Advance models, a -P suffix denotes plain housing (no FIRE print); -SP denotes FUEGO printed housing. Outdoor units with model numbers ending with -R do not include weatherproof back boxes. Outdoor units with model numbers ending in K do include weatherproof back boxes. 5

7 SpectrAlert Advance Mini-Horns The SpectrAlert Advance series of mini-horn sounders are designed to provide primary and secondary signaling for fire and security applications. They include two volume settings, 12- or 24-volt operation and are compatible with the System Sensor synchronization protocol. MHR MHW Sound Pattern Volume Sounder Current Draw (ma RMS) DC FWR DC FWR Temporal High Temporal Low Non-temporal High Non-temporal Low SpectrAlert Advance Horns The SpectrAlert Advance horn includes a universal mounting plate with plug-in design, three volume settings, and a rotary switch used for horn tone selection. SpectrAlert Advance horns are listed to UL 464. Model numbers with a K suffix are listed to UL 1638 and NEMA 4X for outdoor use. HR HRK HKR-R* HW UL Max. Horn Current Draw (ma RMS) Sound Pattern db DC FWR DC FWR Temporal High Temporal Medium Temporal Low Non-temporal High Non-temporal Medium Non-temporal Low Coded High Coded Medium Coded Low * All outdoor units ending in K include weatherproof back box except those with a -R suffix SpectrAlert Advance Chimes The SpectrAlert Advance chimes feature rotary switch selectable horn tone and volume settings and are compatible with the System Sensor synchronization protocol. Intended for private mode applications, the chime meets UL 464. CHR CHW UL Max. Chime Current Draw (ma RMS) Sound Pattern db DC FWR DC FWR 1 Second Chime High Second Chime Low ¼ Second Chime High ¼ Second Chime Low Temporal Chime High Temporal Chime Low Second Whoop High Second Whoop Low Coded High * *This data represents coding at 3 chimes per second. Actual current draw will vary depending upon coding selected. 6

8 SpectrAlert Advance Chime/Strobes The SpectrAlert Advance chime/strobes feature a plug-in design, seven field-selectable candela settings, and dual voltage in one device. Intended for private mode application, the chime/strobe meets UL CHSR CHSW UL Max. Chime/Strobe Current Draw (ma RMS) DC Input 15 15/ / Second Chime High Second Chime Low /4 Second Chime High /4 Second Chime Low Temporal Chime High Temporal Chime Low Second Whoop High Second Whoop Low One Time Chime* FWR Input 15 15/ / Second Chime High Second Chime Low /4 Second Chime High /4 Second Chime Low Temporal Chime High Temporal Chime Low Second Whoop High Second Whoop Low One Time Chime* *Chime/strobes cannot be powered with a coded supply. SpectrAlert Advance Ceiling-Mount Strobes The SpectrAlert Advance ceiling-mount strobes feature a universal mounting plate with preliminary snap-in feature to hold the product in place for the screw attachment, 11 field-selectable candela settings, and dual voltage in one device. SpectrAlert Advance strobes are listed to UL Model numbers with a K suffix are listed to UL 1638 and NEMA 4X for outdoor use. SCR SCRK SCRK-R* SCRH SCRHK SCRHK-R* SCW SCW-P* SCWK SCWH SCWHK Standard High UL Max. Strobe Current Draw (ma RMS) DC FWR DC FWR / NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA * For all SpectrAlert Advance models, a -P suffix denotes plain housing (no FIRE print); -SP denotes FUEGO printed housing. Outdoor units with model numbers ending with -R do not include weatherproof back boxes. Outdoor units with model numbers ending in K do include weatherproof back boxes. 7

9 SpectrAlert Advance Ceiling-Mount Horn Strobes The SpectrAlert Advance ceiling-mount horn strobes are rich with features guaranteed to cut installation time and maximize profits. Features include a universal mounting plate with a preliminary snap-in feature to hold the product in place for the screw attachment, 11 fieldselectable candela settings, dual voltage in one product, and rotary switch selectable horn tone and volume settings. SpectrAlert Advance horn strobes are listed to UL 1971 and UL 464. Model numbers with a K suffix are listed to UL 1638 and NEMA 4X for outdoor use. PC2R PC2R-P* PC2RK PC2RK-R* PC2RH PC2RHK PC2RHK-R* PC2W PC2W-P* PC2W-SP* PC2WK PC2WH PC2WH-P* PC2WHK UL Max. Current Draw (ma RMS), 2-wire Horn Strobe, Standard Range ( cd) V V DC Input 15 15/ / Temporal High Temporal Medium Temporal Low Non-temporal High Non-temporal Medium Non-temporal Low FWR Input Temporal High Temporal Medium Temporal Low Non-temporal High Non-temporal Medium Non-temporal Low UL Max. Current Draw (ma RMS), 2-wire Horn Strobe, High Range ( cd) Volts Volts DC Input FWR Input Temporal High Temporal High Temporal Medium Temporal Medium Temporal Low Temporal Low Non-temporal High Non-temporal High Non-temporal Medium Non-temporal Medium Non-temporal Low Non-temporal Low To calculate current draw for 4-wire horn strobes, add the required strobe current and horn current from the tables below: PC4R PC4RH PC4W PC4WK PC4WHK Standard High UL Max. Strobe Current Draw (ma RMS) DC FWR DC FWR / NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA NA UL Max. Horn Current Draw (ma RMS) Sound Pattern db DC FWR DC FWR Temporal High Temporal Medium Temporal Low Non-temporal High Non-temporal Medium Non-temporal Low Coded High Coded Medium Coded Low * For all SpectrAlert Advance models, a -P suffix denotes plain housing (no FIRE print); -SP denotes FUEGO printed housing. Outdoor units with model numbers ending with -R do not include weatherproof back boxes. Outdoor units with model numbers ending in K do include weatherproof back boxes. 8

10 SpectrAlert Advance Dual Voltage Evacuation Speakers The dual voltage (25/70.7 Vrms) evacuation speakers feature a plug-in design for reducing ground faults and allowing for fast installation. The low total harmonic distortion of the SP speaker offers high-fidelity sound output while the SPV speaker offers high-volume sound output for use in high-ambient-noise applications. The outdoor models ship with a plastic outdoor back box featuring removable side flanges and improved salt water corrosion resistance. Outdoor products are rated from 40 F to +151 F ( 40 C to +66 C) and have a NEMA 4X rating. SpectrAlert Advance speakers are listed to UL 1480 for fire protective signaling systems. SpectrAlert Advance Selectable Output Speaker Strobes The selectable output speaker strobes offer many features to reduce ground faults and make installation simple, including plug-in design with universal mounting plate, rotary switches for voltage and power settings, 11 field-selectable candela settings, and speakers for high fidelity or high volume. The outdoor models ship with the plastic outdoor back box and are rated from 40 F to +151 F ( 40 C to +66 C) for outdoor operation. SpectrAlert Advance selectable output speaker/ strobes are listed to UL 1971 and UL Model numbers with a K suffix are listed to UL 1638 and NEMA 4X for outdoor use. SPSR SPSR-P* SPSRV SPSRV-P* SPSCR SPSCRV SPSRK SPSRK-R SPSRK-P SPSRH SPSRH-P* SPSCRH SPSCRVH UL Max. Strobe Current Draw (ma RMS) SPSW SPSW-P* SPSWV SPSWV-P* SPSCW SPSCW-P* SPSCWV SPSCWV-P* SPSWK SPSWK-R SPSWK-P SPSCWK SPSCWK-R SPSWH SPSWH-P* SPSCWH SPSCWH-P* SPSCWVH SPSCWVH-P* SPSCWHK SPSCWHK-R * For all SpectrAlert Advance models, a -P suffix denotes plain housing (no FIRE print). 8 to 17.5 Volts DC 8 to 17.5 Volts FWR 16 to 33 Volts DC 16 to 33 Volts FWR / N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A SpectrAlert Advance Sync Circuit Module The SpectrAlert Advance Sync Circuit module is designed to simplify installations requiring signal synchronization. Average Current (ma) Peak Current (ma) In-rush Current (ma) Voltage DC FWR DC FWR DC FWR MDL MDLW Description SPR SPW Wall mount speaker SPRV SPWV Wall mount speaker, high db SPCR SPCW Ceiling mount speaker SPCRV SPCWV Ceiling mount speaker, high db SPRK, SPRK-R SPWK, SPWK-R Outdoor wall mount speaker SPCWK, SPCWK-R Outdoor ceiling mount speaker

11 SpectrAlert Advance Accessories SpectrAlert Advance devices can be adapted to nearly any application by selecting the appropriate accessory to meet the application need. Our mounting options allow our strobes, speakers, horns, chimes, and strobe combinations to be placed in new or existing construction with professional results. Description SPBBSC SPBBSCW Surface mount back box skirt for ceiling mount speaker strobe SPBBS SPBBSW Surface mount back box skirt for wall mount speaker strobe RFP RFPW Retrofit plate for SpectrAlert Advance devices BBS-2 BBSW-2 Surface mount back box skirt for wall mount horns, strobes, and horn strobes BBSC-2 BBSCW-2 Surface mount skirt for ceiling mount horns, strobes, and horn strobes SA-WBB Wall mount, metal outdoor back box for horns, strobes, and horn strobes SA-WBBC Ceiling mount, metal outdoor back box for horns, strobes, and horn strobes TR-HS TRW-HS Wall mount trim ring for SpectrAlert Advance horns, strobes, and horn strobes TRC-HS TRCW-HS Ceiling mount trim ring for SpectrAlert Advance horns, strobes, and horn strobes TR TRW Wall mount trim ring for SpectrAlert Advance speakers and speaker strobes TRC TRCW Ceiling mount trim ring for SpectrAlert Advance speakers and speaker strobes MWBB MWBBW Wall mount metal outdoor back box for speakers and speaker strobes MWBBCW Ceiling mount metal outdoor back box for speakers and speaker strobes MP120K Indoor/outdoor 120VAC adapter mounting plate for use with SpectrAlert Advance horns, strobes, horn strobes, chimes, and chime strobes Wall Ceiling Description LENS-A LENS-AC Amber lens attachment for SpectrAlert Advance non-fire (plain) indoor or outdoor strobe models LENS-B LENS-BC Blue lens attachment for SpectrAlert Advance non-fire (plain) indoor or outdoor strobe models LENS-G LENS-GC Green lens attachment for SpectrAlert Advance non-fire (plain) indoor or outdoor strobe models LENS-R LENS-RC lens attachment for SpectrAlert Advance non-fire (plain) indoor or outdoor strobe models HVAC Systems Monitoring During a fire, an HVAC system can circulate toxic gasses and smoke throughout a building unless that building is equipped with InnovairFlex duct smoke detectors. Overcome Mounting Constraints InnovairFlex housings can accommodate multiple installation footprints, including rectangular, square, and anything in between. uce Installation Time Sampling tubes can be installed from the front or back of the detector without the need for tools or hardware. Additional conduit openings, improved wiring space, and high-contrast terminal designations simplify the installation process further. Simplify Testing and Maintenance On 4-wire models an easy access test/reset button simplifies system testing, and Power, Trouble, Maintenance, and Alarm LEDs assure quick and convenient status checks. The cover missing trouble signal, now included on all models, assures system integrity. 10 Model Description Wiring D2 D4120 D4120W D4S Photoelectric low-flow duct smoke detector Photoelectric low-flow duct smoke detector Watertight photoelectric lowflow duct smoke detector Photoelectric low-flow sensor only component Air Velocity Range Operating Temp. Range 2-wire ft/min 4 to 158 F ( 20 to 70 C) 4-wire ft/min 4 to 158 F ( 20 to 70 C) 4-wire ft/min 4 to 158 F ( 20 to 70 C) 4-wire ft/min 4 to 158 F ( 20 to 70 C) D4P120 Power board only component 4-wire 4 to 158 F ( 20 to 70 C) 2151 Photoelectric no-flow/low-flow smoke detector 4-wire ft/min 32 to 120 F (0 to 49 C) Rating Operating Voltage Alarm Current 12/24 VDC 130 ma max 24 VAC/DC or 120 VAC 65 ma max at 24 VDC NEMA 4 24 VAC/DC or 120 VAC 65 ma max at 24 VDC 24 VAC/DC or 120 VAC 65 ma max at 24 VDC 24 VAC/VDC or 120 VAC 65 ma max at 24 VDC 24 VAC/DC w/b114lpbt base; 120 VAC w/b114lp base Auxiliary Contact 2 Form C Auxiliary 2 Form C Auxiliary 2 Form C Auxiliary 75 ma max 1 Form A & 1 Form C Auxiliary Relay

12 HVAC Accessories Model Description Operating Voltage SSK451 Multi-signaling accessory, remote test station with horn, allows local testing of a remote duct detector, for use with System Sensor D4120, DH100ACDC and DH400ACDC VDC APA151 Remote annunciator with piezo alert VDC RA400Z Remote annunciator for spot and duct smoke detectors VDC RTS451 Remote test station accessory VDC (Alarm LED) RTS451KEY Remote test station accessory with key reset VDC (Power LED); VDC (Alarm LED) RTC100 Remote test coil kit with low-profile ring (includes RTS451 remote test station) PS24LO(W) Mini-Alert add-on strobe for use with SSK451 or PA400W VDC DST1 DST1.5 DST3 DST5 DST10 ETX InnovairFlex sampling tube for ducts up to 1 foot InnovairFlex sampling tube for ducts 1 to 2 feet InnovairFlex sampling tube for ducts 2 to 4 feet InnovairFlex sampling tube for ducts 4 to 8 feet InnovairFlex sampling tube for ducts 8 to 12 feet InnovairFlex twelve-inch exhaust tube Sprinkler Systems Monitoring WFD Series Water Flow Detector The WFD Series water flow detectors are available in a range of sizes to accommodate fire sprinkler risers from two to eight inches. All units feature vane type paddles and an adjustable mechanical relay. Model Pipe Size Hole Size Pressure Rating Contact Ratings Triggering Threshold WFD /4 450 PSI 2 Form C: 10 A, 1 /2 125/250 VAC; 2.5 6/12/24 VDC 4 10 GPM WFD /2 1 1 /4 450 PSI 2 Form C: 10 A, 1 /2 125/250 VAC; 2.5 6/12/24 VDC 4 10 GPM WFD PSI 2 Form C: 10 A, 1 /2 125/250 VAC; 2.5 6/12/24 VDC 4 10 GPM WFD /2 1 1 /4 450 PSI 2 Form C: 10 A, 1 /2 125/250 VAC; 2.5 6/12/24 VDC 4 10 GPM WFD PSI 2 Form C: 10 A, 1 /2 125/250 VAC; 2.5 6/12/24 VDC 4 10 GPM WFD PSI 2 Form C: 10 A, 1 /2 125/250 VAC; 2.5 6/12/24 VDC 4 10 GPM WFD PSI 2 Form C: 10 A, 1 /2 125/250 VAC; 2.5 6/12/24 VDC 4 10 GPM WFD PSI 2 Form C: 10 A, 1 /2 125/250 VAC; 2.5 6/12/24 VDC 4 10 GPM T-Tap Series Water Flow Detector The T-Tap water flow detectors are compatible with one-inch NPT style connections, making them ideal for residential or branch line signaling applications. Model WFDT WFDTH WFDTNR Compatible Tee Fittings 1 to 1 1 /2 NPT threaded ferrous and brass, 1 to 2 sweat brass, 1 1 /2 polybutylene plastic, 1 PVC plastic tees having a 1 threaded NPT branch, and 2 cast and malleable threaded tees. 1 to 1 1 /2 NPT threaded ferrous and brass, 1 to 2 sweat brass, 1 1 /2 polybutylene plastic, 1 PVC plastic tees having a 1 threaded NPT branch, and 2 cast and malleable threaded tees. 1 to 1 1 /2 NPT threaded ferrous and brass, 1 to 2 sweat brass, 1 1 /2 polybutylene plastic, 1 PVC plastic tees having a 1 threaded NPT branch, and 2 cast and malleable threaded tees. Pressure Rating Contact Ratings 250 PSI 2 Form C: 125/250 VAC, 2.5 A 24 VDC 250 PSI 2 Form C: 125/250 VAC, 2.5 A 24 VDC 250 PSI 2 Form C: 125/250 VAC, 2.5 A 24 VDC Triggering Threshold 4 10 GPM 4 10 GPM 4 10 GPM 11

13 Supervisory Switches System Sensor manufactures devices for supervising a variety of control valves, including outside screw and yoke, post indicator, butterfly, and rising and non-rising stem gate. Model Description Valve Size Contact Rating OSY2 PIBV2 PSP1 Used to monitor the open position of an outside screw and yoke type gate valve Used to monitor the open position of post indicator and butterfly control valves A plug-in special application supervisory switch designed for applications where no other type of listed valve supervisory switch can be used 1 to /250 VAC; 2.5 6/12/24 VDC /250 VAC; 2.5 6/12/24 VDC Plug Contacts: 6/12/24 VAC/DC, normally open Cover Tamper: 125/250 VAC, 6/12/24 VAC Maximum Operating Current 250mA EPS Series Pressure Switches The EPS Series pressure switches are offered in three varieties and with one or two SPDT contacts. The EPS10 alarm pressure switches are ideal for dry pipe systems, while the EPS40 and EPS120 supervisory pressure switches are intended for supervising air pressure in pipes or pressure tanks. Model EPS10-1 EPS10-2 EPS40-1 EPS40-2 EPS120-1 EPS120-2 Maximum Operating Pressure Maximum Adjustment Range Differential Contact Rating 250 psi 4 to 20 psi 3 psi 10 A, 1 /2 125/250 VAC; 2.5 6/12/24 VDC 250 psi 10 to 100 psi 3 10 psi and 6 psi at 100 psi 250 psi 10 to 200 psi 3 10 psi and 9 psi at 200 psi 10 A, 1 /2 125/250 VAC; 2.5 6/12/24 VDC 10 A, 1 /2 125/250 VAC; 2.5 6/12/24 VDC Threaded Connection 1 /2 NPT male reinforced nylon 1 /2 NPT male reinforced nylon 1 /2 NPT male reinforced nylon Alarm Bells The alarm bells offer high output notification in security and fire alarm systems. Six-inch, eight-inch, and ten-inch models are available for 24 VDC and 120 VAC systems. Model Gong Size Nominal Voltage Operating Voltage Sound Output Maximum Current SSM VDC VDC 82 db DC 31.1 ma / FWR 53.5 ma SSM VDC VDC 80 db DC 31.1 ma / FWR 53.5 ma SSM VDC VDC 81 db DC 31.1 ma / FWR 53.5 ma SSV VAC VAC 85 db 53 ma SSV VAC VAC 82 db 53 ma SSV VAC VAC 82 db 53 ma 12

14 System Sensor is a global manufacturer of fire detection and notification devices, specializing in smoke detection and notification technology. System Sensor places a premium on research and development, resulting in products that are reliable, sophisticated, and designed for real-world applications. With sales, service, and manufacturing facilities throughout the Americas, Europe, and Asia, System Sensor s high quality, innovative products are the most comprehensive in the industry System Sensor. The company reserves the right to change specifications at any time. A /08 #2036