Large projects up to 600 points NB: For projects +600 units refer Pierlite Australia

Transcription

1 FOOLPROOF INSTALLATION The DIGINET System is as simple to install as a non-monitored single point system, just install the emergency lights as per plans and by using a CMS type cabling connection method, the system should not be compromised by poor cable connection. The plug & play type cabling will connect to a small wall mounted LCD display computer, then by simply commissioning each product into the computer the system is ready to go. DIGINET is a simple, intelligent emergency lighting management system designed by industry experts to effectively manage and monitor the status of emergency lighting within a network. DIGINET utilises a DALI international open protocol to communicate between luminaires and the computer software. Types of applications for a DIGINET system Commercial & industrial installations Low rise office or apartment buildings Multiple building campuses Hospitals Correctional facilities Educational facilities Health centres and aged care facilities Centralised emergency light management x typical system styles SELF MONITORING DIGINET is self monitoring, it can diagnose system and product faults in readiness for maintenance access at either the 6 monthly test or anytime in between. INDEPENDENT OR COMPLETE-YOUR CHOICE You can choose whether to cable for an independent DIGINET Lighting Management system or a Complete DALI Lighting Management system, the cabling and connection remains the same simple method for both systems therefore both systems can connect to the same wiring loop. This will reduce Labor, Cost and confusion. EASY SYSTEM CONTROLS The DIGINET system features a unique LCD graphical user interface type computer to control and monitor. This is accessible via ethernet, LAN, WAN etc. The LCD control panel can be located in an electrical/data riser, front desk etc. and accessed on any PC via an allocated IP address over the internet. SIMPLE AUSTRALIAN STANDARDS COMPLIANCE The DIGINET emergency lighting management system makes compliance with AS229.2 and various State and Local regulations very easy. The system is designed to run the required 6 monthly discharge tests, create maintenance logs and run compliance reports to assist in making sure that a crucial building safety system stays operational. The system provides reliable data that is not compromised by human error and makes it quick and easy to access. Small projects <60 points Medium projects up to 120 points Large projects up to 600 points NB: For projects +600 units refer Pierlite Australia 1

2 DIGINET DALI Control Panel DIGINET DALI Touch Screen Control Panel Simple one touch control system Automatic initiation and logging of tests User friendly colour interface On screen luminaires health status Up to 120 emergency lighting points per panel Interconnect up to Panels using Ethernet backbone The DIGINET product has been designed in accordance Small to medium commercial & industrial installations, low rise office or apartment buildings, multiple building campuses, small to medium public buildings, health centres and aged care facilities. L N EXIT SIGN EMERGENCY LIGHT DALI PSU DALI PSU EXIT SIGN EMERGENCY LIGHT DA DA 2-8V DC VA DIGINET TOUCH SCREEN CONTROLLER DA DA DIGINET DALI Touch Screen Control Panel Power Supply DALI PS1 Surf Remote (200MA) PS DALI DIN Rail 2 IP20 max dim(mm) 0.92kg 200 x 150 x 20

3 DIGINET Cable Management Options Simplicity, flexibility and efficiency is the key to installation and interconnection of a DIGINET DALI management system. 5 way soft and hard wiring connectivity solutions are available for commercial, residential, infrastructure or industrial lighting applications. Simplifies the wiring and provides Plug & Play connectivity 5 way hard and soft wiring solutions available Reduce wastage in materials Luminaires and interconnecting cables can be installed at the same time Combined lighting, power, control and communication wiring eliminates the need for separate Data Cabling. Add Luminaires or Devices by simply plugging in. Reduce the quantity and variety of wiring required in an installation. It is highly recommended that in every installation, 5 core cabling such as 5 core round, 5 core flat or 5 core structured cabling solution is taken to each zone and then routed to each luminaire. This gives total flexibility and makes the project future proof. QF1 Plugging multiple A5T reduces the No. of QF2 leads required. A5T QF2 QF Lead hard wired 2 to fitting. x2.5mm 2 (A,N,E) & 2x1.5mm Dali.w QFa Lead hard wired 2 to fitting. 5x1.0mm, maximum 2.5metres. QFc Lead mates with Qf6 Plug in fitting. 2 5x1.0mmmaximum length 2.5 metres. QFb Lead mates with QF6 Plug 2 in fitting. x2.5mm(a,n,e) & 2 2x1.5mm Dali. 5 core flat QF6 QF5 Interceptor allowing splitting of circuits/new power supply. Light Fitting B5.2 Connector - Field B5T Fits directly into QF6 Cable and Connector specification: QF Hard wired to fitting. QF & QFS hard wired to fitting. QF1 New power supply Mains 20VAC. A and 20A versions available 5 core wiring which typically consists of x conductors for A, E, N and 2 x conductors for DALI (min 1.5mm2) allowing for up to 6 DALI Addresses over 00 metres. Contact your local Pierlite office for further details

4 DIGINET LED EXIT - DALI Stylish, energy efficient LED DALI exit luminaire compliant to Australian emergency lighting standards AS/NZS229. Including DALI emergency control gear. Strip multiple LED lamps Polycarbonate housing Slimline acrylic legend blade Fully approved to AS/NZS229 thermal & illuminance requirements Pictogram viewing distance is 2m Surface & Recessed mount, swivel action of panel for use on angled ceilings Low power consumption A complete one box solution including body diffuser and all pictogram inserts Optional black theatre body housing and picto inserts The DIGINET product has been designed in accordance Ideal for emergency lighting application where aesthetics are everything, commercial office areas, hotels, shopping and cinema complexes, apartments, hospitals. Product LEDXM2PTA Classification E1.25 E Mounting Height in Metres Blade LED Slide Connect C/W Pictogram decals.6 LED Swivel Action Wall or Ceiling Mount Conduit Mount Box LEDCM All pictogram inserts IP20 max dim(mm) 2.0kg 68 x 55 x 255 LEDXM2PTA Exit Sign DALI LEDXM2PBTA Theatre Exit Sign DALI LEDRB Recessed Bracket (cut-out: 80x88mm) EXCB Cantilever bracket LEDCM Conduit mount box SKITLED Suspension Kit RODSUSP/TLSP Rod Suspension Kit DIRPPSS Pictogram inserts single sided DIRPPDS Pictogram inserts Double sided Battery

5 DIGINET Stingray LED - DALI Stylish, energy efficient LED quick connect exit luminaire compliant to Australian emergency lighting standards AS/NZS229. Including DALI emergency control gear. Strip multiple LED lamp Polycarbonate housing Slimline design Fully approved to AS/NZS229 thermal & illuminance requirements Pictogram viewing distance is 2m Surface mount wall or ceiling Low power consumption A complete one box solution including body diffuser and all pictogram inserts The DIGINET product has been designed in accordance Ideal for emergency lighting applications where low power consumption, flexibility and project budget is a priority. Install in commercial office areas, hotels, shopping and cinema complexes, apartments, hospitals. Product STLEDM2PTA Classification E1.25 E1.25 Mounting Height in Metres Slide Connect C/W Pictogram decals STLEDM2PTA LED Exit Sign DALI STLEDM2PBTA LED Theatre Exit Sign DALI Cantilever Bracket EXCB Picto decals included IP20.0kg Max Dim(mm) 95 x 81 x 20 WGWE Wall exit wire guard WGCE Ceiling exit wire guard EXCB Cantilever bracket Rod suspension white Rod suspension black DIRPPDS Pictogram inserts double sided Batteries

6 DIGINET LED Firefly - DALI Versatile non-maintained DALI LED emergency luminaries compliant to AS/NZS229. Including DALI emergency control gear. Energy efficient high output watt LED Easy installation via pin flex & plug and data connection Recessed or surface mount options Non corrosive polycarbonate housing and reflector High performance lens system, providing D12.5/D12.5 spacing Low power consumption and maintenance Suspension kit and tamper proof options available Compliant to AS/NZS229 Circuit rated system life hrs Black theatre options available The DIGINET product has been designed in accordance with International DALI standard IEC Commercial and interior applications, coastal environments, apartments, shopping centres, hospitality, prisons and hospitals. Tough polycarbonate body Product FFRLEDTA FFRLEDBKTA FFSLEDAKTA FFSLEDBKQKTA FFRLED Classification D12.5 D12.5 D D D12.5 D12.5 D D Mounting Height in Metres / D12.5 mm 1mm 229mm 229mm 6 286mm IP20 W LED DALI FFRLEDTA Non-Maintained Recessed FFRLEDBKTA Non-Maintained Recessed Black FFSLEDAKTA Non-Maintained Surface Mount Alloy Can FFSLEDBKQKTA Non-Maintained Surface Black mm 1mm FFLEDVK Vandal resistant kit White Pole Suspension kit 00mm Black Pole Suspension kit 1200mm 286mm FFSLEDDISC Suspension cover disc Security screws ( pack) for alloy SM CAN Battery max dim(mm) 0.90kg 159 x 85 WP LED Exit 91

7 FFSLEDAKTA / Surface mount FFRLEDBKQKTA Black surface mount White Pole Suspension kit 00mm Black Pole Suspension kit 1200mm Recessed vandal option 7

8 DIGINET Warden - DALI Weatherproof IP65 exit luminaire designed with energy efficient LED technology housed in a rugged vandal resistant casing, including DALI emergency control gear. High performance LED strip Ceiling or Wall mount, double or single sided Vandal and Tamper proof Impact resistant Pictogram decals included Robust steel fabrication with UV Resistant powder coating Low power consumption and maintenance Slim, aesthetic and practical design The DIGINET product has been designed in accordance Adverse environment, Industrial / Commercial, Car parks, Railway stations, Mining. Robust steel fabricated body mm 1mm 229mm 286mm Weatherproof & Vandal Resistant C/W Bracket & Pictogram decals 8 IP65 max dim(mm).0kg 1 x 286 x WP LED Exit 91 WELED2VM2TA LED DALI Exit 2m WELED2VM0TA LED DALI Exit 0m Battery 99025

9 DIGINET High 5 - DALI Square sided batten with energy efficient T5 lamp technology including DALI emergency control gear. High performing photometric distribution in either bare or diffused options The body is a cold rolled steel channel, finished in white polyester powder coat with UV stabilised polycarbonate plastic end caps Unique diffuser removal system for easy lamp change Quarter turn quick release reflector Large way tunnel terminal block Rolled cable entry no grommets required Energy efficient T5 lamp fluorescent circuit Wide body assembly is designed to cover flush mount junction box installations Optional light movement and IR sensor capabilities True end to end mounting possible with knockouts for wiring Available with DALI dimming and emergency The DIGINET product has been designed in accordance General commercial interiors, factories, warehouses, shopping centres, stairwells and interior carparks. Product Classification Mounting Height in Metres HI5128B D HI5228B D D HI5128D D C HI5228D D C D Diffused model Diffused Batten HI5128D/QA 1x28W T5 Non-Maint DALI Emerg wide body HI5128DAPA 1x28W T5 Maint DALI Emerg wide body HI5228DAPA 2x28W T5 Comb Maint DALI Emerg HI5228DARA 2x28W T5 Comb Non-Maint DALI Emerg (Sust) Bare Batten HI5128B/QA 1x28W T5 Non-Maint DALI Emerg wide body HI5128BAPA 1x28W T5 Maint DALI Emerg wide body HI5228BAPA 2x28W T5 Comb Maint DALI Emerg HI5228BARA 2x28W T5 Comb Non-Maint DALI Emerg (Sust) Batteries HI51WG Wire Guard T/S single/twin 1W HI528WG Wire Guard T/S single/twin 28W Optional Intergrated Auto Dim, Motion and Light Sensors available upon request. IP20 Max Dim(mm).0kg 1229 x 2 x 1 9

10 DIGINET Nipper Diffused Batten - DALI Versatile wide body diffused batten, designed for a wide variety of uses, including DALI emergency control gear. Linear diffuser provides a stylish appearance on any project. Quarter turn quick release reflector Rippled edge technology for hand installation safety Rolled cable entry - no grommets required Pierwhite powder coat finish Complete with triphosphor lamp/s colour 80 Quick release diffuser end cap Lineal extruded diffuser End to end mounting possible with unique end cap design Diffuser can be removed without removing end cap Wide body version covers junction box ABS fire retardant end caps Available with DALI dimming and emergency The DIGINET product has been designed in accordance General commercial & semi industrial interiors, Retail outlets, Factories, Warehouses, Multi-storey car parks Product Classification Mounting Height in Metres PN8 D C PN218 D C D PN D C PN26 D C D PND218 D C D PND D C PND26 D C D Bare Batten PN8/QA 1x18W T8 Non-Maint DALI Emerg wide body PN8APA 1x18W T8 Maint DALI Emerg wide body PN218APA 2x18W T8 Comb Maint DALI Emerg PN218ARA 2x18W T8 Comb Non-Maint DALI Emerg (Sust) PN/QA 1x6W T8 Non-Maint DALI Emerg narrow body PNAPA 1x6W T8 Maint DALI Emerg narrow body PN26APA 2x6W T8 Comb Maint DALI Emerg PN26ARA 2x6W T8 Comb Non-Maint DALI Emerg (Sust) Diffused Batten PND218APA 2x18W T8 Comb Maint DALI Emerg PND218ARA 2x18W T8 Comb Non-Maint DALI Emerg (Sust) PND/QA 1x6W T8 Non-Maint DALI Emerg narrow body PNDAPA 1x6W T8 Maint DALI Emerg narrow body PND26APA 2x6W T8 Comb Maint DALI Emerg PND26ARA 2x6W T8 Comb Non-Maint DALI Emerg (Sust) PHWG8 Galvanised Wire Guard T/S PN8 PHWG218 Galvanised Wire Guard T/S PN218 PHWG Galvanised Wire Guard T/S PN PHWG26 Galvanised Wire Guard T/S PN26 PHWG8WH White Powder Wire Guard T/S PN8 PHWG218WH White Powder Wire Guard T/S PN218 PHWGWH White Powder Wire Guard T/S PN PHWG26WH White Powder Wire Guard T/S PN26 Batteries IP20 max dim(mm).kg 1229 x 52 x 92

11 DIGINET Fusion T5 Recessed - DALI Energy efficient T5 recessed troffer including DALI emergency control gear, suitable for an array of diffuser panels enabling BCA compliant designs. Body of phosphate steel with highly reflective powder coat finish Suitable for lay in or hinged frame diffuser panels Available with all high performance panels including Y, Y5, Y19 and Y12 Recess depth of 85mm providing low glare illumination in accordance with AS80.1 Suitable for use with Plaster Master frame for plaster mounting Suitable for air trim kits Available with DALI dimming and emergency The DIGINET product has been designed in accordance Retail shops, office, corridors, boardrooms, common area, canteens, foyers, halls, auditoriums, hospitals, shopping centres. Product Classification Mounting Height in Metres FSN228P2AA/PA D D FSN128P2AASPA D D Recessed Y12 Panel no trim FSN128P2AASPA 1x28W T5 C/W Maint DALI Emerg & SRS FSN228P2AA/PA 2x28W T5 C/W Comb Maint DALI Emerg Note: For hinged frame substitute `H for `P Batteries IP20.8kg Max Dim(mm) 1229 x 2 x 1

12 DIGINET Futcha 5 Firefly - DALI The Futcha 5 is a high performance louvred luminaire for T5 lamp technology, incorporating LED DALI emergency control gear. Class leading efficiency enabling BCA and Greenstar compliant designs Suitable for Philips 25W ECO lamp Full parabolic high purity aluminium louvres Sturdy low profile body of phosphated steel with high reflectivity Electronic control gear, options for Analogue, DSI and DALI Sensors can be housed in the luminaire The DIGINET product has been designed in accordance Energy efficient high output watt LED Options for soft wiring Non corrosive polycarbonate housing and reflector High performance lens system, providing D12.5/D12.5 spacing Low power consumption and maintenance Compliant to AS/NZS229 General commercial interiors, office, corridors, retail stores and shopping centres. Product Classification Mounting Height in Metres F5128 D D F5228 D D F521 D D F51 D D F51 D D Power Specifications FFRLEDTA / D12.5 Input voltage and tolerance 20V AC +/- Nominal frequency 50/60Hz Nominal power 8. (hr) Consumption VA 2.9 Battery NiMH 1700mAh Battery operating temp -20 C to +70 C Battery Voltage.8V Battery A/hr rating 1700mAhr (run time 2.5hr) Battery Charging Dual rate ~170mA then pulse 1min/0min Dim (mm) Recessed C/W LED Firefly DALI Emerg F5128PBDAFA 1x28W DALI T5 Miro Semi Spec ULB F5128MBDAFA 1x28W DALI T5 Semi Spec ULB F5128SBDAFA 1x28W DALI T5 Specular ULB F5228PBDAFA 2x28W DALI T5 Miro Semi Spec ULB F5228MBDAFA 2x28W DALI T5 Semi Spec ULB F5228SBDAFA 2x28W DALI T5 Specular ULB F521PBDAFA 2x1W DALI T5 Miro Semi Spec ULB F521MBDAFA 2x1W DALI T5 Semi Spec ULB F521SBDAFA 2x1W DALI T5 Specular ULB F51PBDAFA x1w DALI T5 Miro Semi Spec F51MBDAFA x1w DALI T5 Semi Spec ULB F51SBDAFA x1w DALI T5 Specular ULB F51PBDAFA x1w DALI T5 Miro Semi Spec ULB F51MBDAFA x1w DALI T5 Semi Spec ULB F51SBDAFA x1w DALI T5 Specular ULB Replacement EM FFRLEDTA W LED DALI Emerg Non-Maint Rec Batteries IP20 max dim(mm) 5.0kg 89 x 590 x 60

13 DIGINET SDW / SDWA IP65 - DALI Corrosion resistant GRP weatherproof fluorescent luminaire designed with high performance T8 Optics, including DALI emergency control gear. Tough corrosion resistant glass-fibre reinforced polyester body UV stabilised high Impact polycarbonate lens (optional acrylic) Polyurethane machine poured foam gasket Stainless steel diffuser clips, screw lockable Internal ribbed prism lens 20mm grommet cable entry at one end IP65 Maintained, combined maintained, sustained and non-maintained General weatherproof conditions, wet rooms, food processing areas, dairies, industrial plants, car park and wharves. Product SDW SDW26 UV stabilised high Impact polycarbonate lens SDW218 Stainless steel clips Food industries - watershed bracket available Compliant to AS/NZS229 The DIGINET product has been designed in accordance Classification C25 D2 D0 C0 D25 C0 D x 18W 2 x 6W Mounting Height in Metres Dim (mm) 657 x 198 x x 198 x IP65 Weatherproof SDW218APA 2x18W T8 Comb Maint DALI Emerg SDW218ARA 2x18W T8 Comb Non-Maint DALI Emerg (Sust) SDWAPA 1x6W T8 Maint DALI Emerg wide body SDW26APA 2x6W T8 Comb Maint DALI Emerg SDW26ARA 2x6W T8 Comb Non-Maint DALI Emerg (Sust) Batteries For 5 watershed factory fitted to 6W and 58W acrylic models suffix WS, ie. SDW26MWS For Acrylic diffuser models suffix A in catalogue number after SDW M ie. becomes SDWAM IP65 Max Dim(mm) 6.5kg 1267 x 198 x 125 1

14 DIGINET PWP & PWA IP65 - DALI Corrosion resistant GRP weatherproof fluorescent luminaire designed with high performance T5 and T8 optics, including DALI emergency control gear. Lamp 18W T8, 6W T8,1W T5, 28W T5 Tough corrosion resistant glass-fibre reinforced polyester body UV stabilised high impact polycarbonate lens (optional acrylic) Removable steel gear tray/reflector Polyurethane machine poured foam gasket Tamper resistant stainless steel (PWP) or polycarbonate (PWA) diffuser retaining clips Internal ribbed lens prism Optional IR and motion sensor capabilities Compliant to AS/NZS229 20mm grommet cable entry at one end Maintained, non-maintained, sustained and combined maintained available The DIGINET product has been designed in accordance General weatherproof conditions, wet rooms, food processing areas, industrial plants, car parks Product Classification PWP PWP21 PWP8 PWP218 PWP PWP26 PWP128 PWP228 1 D25 C25 D25 C25 D25 C20 C25 D25 D2 C0 D25 C2 D0 D6 C50 D50 C50 D Mounting Height in Metres IP65 max dim(mm) 5.kg 5 x 120 x IP65 Weatherproof PWP/QA 1x1W T5 Non-Maint DALI Emerg wide body PWPAPA 1x1W T5 Maint DALI Emerg wide body PWP21APA 2x1W T5 Comb Maint DALI Emerg PWP21ARA 2x1W T5 Comb Non-Maint DALI Emerg (Sust) PWP128/QA 1x28W T5 Non-Maint DALI Emerg narrow body PWP128APA 1x28W T5 Maint DALI Emerg wide body PWP228APA 2x28W T5 Comb Maint DALI Emerg PWP228ARA 2x28W T5 Comb Non-Maint DALI Emerg (Sust) PWP8/QA 1x18W T8 Non-Maint DALI Emerg wide body PWP8APA 1x18W DALI T8 Maint DALI Emerg wide body PWP218APA 2x18W T8 Comb Maint DALI Emerg PWP218ARA 2x18W T8 Comb Non-Maint DALI Emerg (Sust) PWP/QA 1x6W T8 Non-Maint DALI Emerg narrow body PWPAPA 1x6W T8 Maint DALI Emerg wide body only PWP26APA 2x6W T8 Comb Maint DALI Emerg PWP26ARA 2x6W T8 Comb Non-Maint DALI Emerg (Sust) For acrylic models replace P in the catalogue with A i.e PWPM becomes PWAM Batteries,21,8,218, & & Optional Intergrated Auto Dim, Motion and Light Sensors available upon request.

15 DIGINET Vandaguard - DALI Low profile IP66 fluorescent weatherproof luminaire designed for hostile and vandal prone environments, including DALI emergency control gear. Secure access screws Pressure die-cast marine grade LM20 aluminium body with separate battery compartment Robust reeded or clear prismatic polycarbonate diffuser Complete with security screws, removable gear tray and single one piece gasket Low profile IP66 protection Maintained, combined-maintained, combined nonmaintained or non-maintained Complies to AS/NZS229 Dual conduit access Optional motion and IR sensor capabilities Available with DALI dimming and emergency The DIGINET product has been designed in accordance Prisons, subways, railway stations and underground carparks Tough polycarbonate lens Product VPF8 VPF218 VPF VPF26 Classification Low Profile Adverse IP66 Weatherproof Mounting Height in Metres VPF8/QA 1x18W T8 Non-Maint DALI Emerg VPF8APA 1x18W T8 Maint DALI Emerg VPF218APA 2x18W T8 Comb Maint DALI Emerg VPF218ARA 2x18W T8 Comb Non-Maint DALI Emerg (Sust) VPF/QA 1x6W T8 Non-Maint DALI Emerg D C C VPFAPA 1x6W T8 Maint DALI Emerg VPF26APA 2x6W T8 Comb Maint DALI Emerg 1.8 VPF26ARA 2x6W T8 Comb Non-Maint DALI Emerg (Sust) C C D Battery Optional Intergrated Auto Dim, Motion and Light Sensors available upon request. IP66 Max Dim(mm) 8.5kg 1 x x 80 15

16 DIGINET VANDALUX - DALI EMERGENCY Adverse and weatherproof IP66 fluorescent luminaire designed for hostile, industrial and vandal prone environments, including DALI emergency control gear. Pressure die-cast marine grade LM20 aluminium body with (separate battery compartment,18w only) Heavy-duty reeded or clear prismatic polycarbonate diffuser Removable gear tray Maintained, combined-maintained, combined non-maintained or non maintained Complete with security screws and single piece gasket IP66 protection Standard finished chromate treated APO grey epoxy powder coat Dual conduit access Option safety orange body finish available Complies to AS/NZS229 Optional motion and IR sensor capabilities Available with DALI dimming and emergency The DIGINET product has been designed in accordance Classification VP8 VP218 VP VP26 D C C C C20 D25 1x18W T8 2x18W T8 1x6W T8 2x6W T Adverse IP66 Weatherproof 1x18W T8 Non-Maint DALI Emerg VP8APA 1x18W T8 Maint DALI Emerg VP218APA 2x18W T8 Comb Maint DALI Emerg Weatherproof for hostile, industrial and vandal prone environments, railway stations, subways and car parks. VP218ARA 2x18W T8 Comb Non-Maint DALI Emerg (Sust) VP/QA 1x6W T8 Non-Maint DALI Emerg VPAPA 1x6W T8 Maint DALI Emerg VP26APA 2x6W T8 Comb Maint DALI Emerg VP26ARA 2x6W T8 Comb Non-Maint DALI Emerg (Sust) Mounting Height in Metres Dim (mm) 670 x x x x x x x x C28VANDALUX Horizontal wall bracket for 18W C29VANDALUX Horizontal wall bracket for 6W C2VANDALUX Mounting kit for 18W to suit dia.mm pipe CVANDALUX Flat wall bracket, 5 upcast, Dia. mm spigot CVANDALUX Corner wall bracket, 5 upcast, Dia. mm spigot C5VANDALUX Universal bracket C6VANDALUX Ceiling mounting bracket PMB2/VAN Single pipe bracket to suit Dia. 2-6mm pipe PMB0/VAN Single pipe bracket to suit Dia. 8-51mm pipe Battery Optional: Intergrated Auto Dim, Motion and Light Sensors available upon request. IP66 VP8/QA Product max dim(mm) 6.kg 1 x x 120

17 Pierlite is a member of the Gerard Lighting Group. The sun and the moon, two dominant sources of light control. The third is Pierlite.