Test Report. Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2. Page 1 of 6

Transcription

1 Applicant: Y. Lin Electronics Co., Ltd. No. 3 Xinguang Road, Jinhe The third Industrial Zone, Zhangmutou Town, Dongguan,. Guangdong, China. Number: Date: 11 Feb HKG-001 Sample Description : Product : White LED Brand Name : Not Applicable Model No. : M3ACLSCO, M3ACLSEO N, M3ACLSWO N, M3ACLSCO N, M3AC2SCO N, M3BC2SCO N, M3BCLSEO N, M3BCLSWO N, M3BCLSCO N, M3ZCLSEO N, M3ZCLSWO N, M3ZCLSDO N, M3ZCLSCO N, M3PCLSWO N, M3PCLSCO N\, M3CCLSC4O N, M3CCLSEO N, M3NCLSEO N, M3NCLSWO N Electrical Rating : DC 4.5V Buyer : Not Applicable Supplier : Not Applicable No. of Samples : 1 Date Received : 03 Feb 2015 Date Test Conducted : 03 Feb 2015 to 11 Feb 2015 Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2 Test Method : IEC : 1993+A1+A2 Test Result : See the attached sheets. Conclusion : See the attached sheets. Prepared and checked by: Yu Wing Tai, Keith Assistant Manager Page 1 of 6

2 Remark: Number: HKG When determining the test conclusion, the Measurement Uncertainty of test has been considered. 2. The requirement of the French regulation published on 11 th Mar 2008 for LED product was included in this test report. 3. This report applies only to specific tests carried out as details in the report. 4. The test was conducted by operating the apparatus at rated voltage 4.5VDC. 5. All models included in this test report are identical in LEDs used, electrical, mechanical and physical construction, except with different model no. used for trading purpose. Page 2 of 6

3 Test Results: Number: HKG-001 IEC : 1993+A1+A2 Clause Title/Description Result 8 Classification Complied 9 Measurement for classification Complied Conclusion: The measured emission level of the apparatus did not exceed the accessible emission level of class 1 according to IEC : 1993+A1+A2. Page 3 of 6

4 Appendix I: Number: HKG-001 Table of critical components and materials Component Manufacturer Type No. Technical Data Standard Marks of Conformity White LED (water clear) Y. Lin Electronics Co., Ltd. M3ACLSCO -- IEC Tested with appliance Page 4 of 6

5 Appendix II: Number: HKG-001 Table of measuring data For White LED wavelength at first peak (water clear) Condition Normal (without cover) Wavelength Angular Subtense Thermal Hazard Power Photochemical Hazard Energy 451nm 16.89mrad 41.7mm 1.0mW 4.1mW 100.0mm 2.8mJ 4.1mJ Under supply voltage DC 4.5V, the above measured power of captioned LED showed it complied with LED requirement by adding 68 resistor to connect in series with White LED. For White LED wavelength at second peak (water clear) Condition Normal (without cover) Wavelength Angular Subtense Thermal Hazard Power Photochemical Hazard Energy 544nm 16.89mrad 41.7mm W 4.1mW 100.0mm 1.9mJ 295.9mJ Under supply voltage DC 4.5V, the above measured power of captioned LED showed it complied with LED requirement by adding 68 resistor to connect in series with White LED. *************************************************** End of Page ***************************************************** Page 5 of 6

6 Appendix III: Number: HKG-001 Photo: Outlook of the apparatus *************************************************** End of Report ***************************************************** Page 6 of 6