Test Report. Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2. Page 1 of 6

Transcription

1 Applicant: Y. Lin Electronics Co., Ltd. No. 3 Xinguang Road, Jinhe The third Industrial Zone, Zhangmutou Town, Dongguan,. Guangdong, China. Number: Date: 11 Feb HKG-001 Sample Description : Product : Red LED Brand Name : Not Applicable Model No. : M3AR4UCO, M3AR4UCO-1-2-3, M3AR4UDO-1-2-3, M3AR4UWO-1-2-3, M3AR2UWO-1-2-3, M3AR4UEO-1-2-3, M3AR2UCO-1-2-3, M3AR2UDO-1-2-3, M3AR2PDO-1-2-3, M3AR4PDO-1-2-3, M3NR4UCO-1-2-3, M3NR4UDO-1-2-3, M3NR4UWO-1-2-3, M3PR4UCO-1-2-3, M3PR4UDO-1-2-3, M3AR2UDO-1-2-3, M3ER4UDO-1-2-3, M3ER4UCO-1-2-3, M3ZR4UCO-1-2-3, M3ZR4UDO-1-2-3, 31R2UDO-1-2-3, M3CR2UCO-1-2-3, M3CR2UDO-1-2-3, M3CR2UWO-1-2-3, M3CR4UWO-1-2-3, M3CR4UCO-1-2-3, M3CR4UDO Electrical Rating : DC 4.5V Buyer : Not Applicable Supplier : Not Applicable No. of Samples : 1 Date Received : 03 Feb 2015 Date Test Conducted : 03 Feb 2015 to 11 Feb 2015 Test Requested : Test for compliance with clauses 8 and 9 of IEC : 1993+A1+A2 Test Method : IEC : 1993+A1+A2 Test Result : See the attached sheets. Conclusion : See the attached sheets. Prepared and checked by: Yu Wing Tai, Keith Assistant Manager Page 1 of 6

2 Remark: Number: HKG When determining the test conclusion, the Measurement Uncertainty of test has been considered. 2. The requirement of the French regulation published on 11 th Mar 2008 for LED product was included in this test report. 3. This report applies only to specific tests carried out as details in the report. 4. The test was conducted by operating the apparatus at rated voltage 4.5VDC. 5. All models included in this test report are identical in LEDs used, electrical, mechanical and physical construction, except with different model no. used for trading purpose. Page 2 of 6

3 Test Results: Number: HKG-001 IEC : 1993+A1+A2 Clause Title/Description Result 8 Classification Complied 9 Measurement for classification Complied Conclusion: The measured emission level of the apparatus did not exceed the accessible emission level of class 1 according to IEC : 1993+A1+A2. Page 3 of 6

4 Appendix I: Number: HKG-001 Table of critical components and materials Component Manufacturer Type No. Technical Data Standard Marks of Conformity Red LED (water clear) Y. Lin Electronics Co., Ltd. M3AR4UCO Wavelength: nm IEC Tested with appliance Page 4 of 6

5 Appendix II: Number: HKG-001 Table of measuring data Red LED (water clear) Condition Normal (without cover) Measured Wavelength Measured Angular Subtense Measuring Distance Thermal Hazard Measured Power Limit for Class 1 629nm 0.93mrad 14.0mm W W Under supply voltage DC 4.5V, the above measured power of captioned LED showed it complied with Class 1 LED requirement by adding 360 resistor to connect in series with Red LED. *************************************************** End of Page ***************************************************** Page 5 of 6

6 Appendix III: Number: HKG-001 Photo: Outlook of the apparatus *************************************************** End of Report ***************************************************** Page 6 of 6