Overview of Standards for CO Detection Products
|
|
- Sydney Pope
- 6 years ago
- Views:
Transcription
1 Overview of Standards for CO Detection Products Rev 1.1
2 1 General Overview Application and Installation Codes & Standards Product Standards Certified and Listed Products (Conforms to ANSI/UL Standards) State & City Authorities and Building Inspectors Performance The Right Choice Specifications subject to change without notice. USA Page 2 of 10
3 1 General Overview The commercial building industry (i.e., building owners and operators, design professionals, and institutions) is concerned about environmental safety and minimizing energy costs. When designing and choosing a carbon monoxide (CO) detection and control system for a parking structure, it is essential to evaluate established codes and standards. 2 Application and Installation Codes & Standards Various institutions, societies, organizations and government agencies (i.e., International Mechanical Code (IMC), Occupational Safety and Health Administration (OSHA), National Fire Protection Agency (NFPA), and other) have established codes and standards to limit carbon monoxide levels in parking structures. Most building codes and application standards allow demand-based ventilation in enclosed parking garages if carbon monoxide levels are monitored. This type of design can drastically reduce energy costs (i.e. operating of garage fans and heating system), increase fan belt and motor life, and reduce noise. A range of gas detection (sensors/transmitters) and control systems are available for handling the sequence of operations in parking structure applications. The actual parking structure s design will determine which type of gas detection (sensor/transmitter) and control system best fits the application. For additional information please refers to INTEC Controls CO Parking Garage Design Guidelines. The selected detectors (sensors/transmitters) and controllers must be capable of providing the control sequence of operations and alarming for the mechanical system design and building safety. Specifications subject to change without notice. USA Page 3 of 10
4 3 Product Standards The American National Standard Institute (ANSI) and Underwriters Laboratories (UL) have issued appropriate standards (i.e. ANSI/UL2075, ANSI/UL2017, etc.) applicable for carbon monoxide (CO) detection and control products. Only utilize CO product solutions that are tested, certified, and listed for the intended use and in compliance with the industry s standards. Electrical Safety and Performance Codes & Standards for Gas Detection and Control Systems Products Standards and technical regulations exist for gas detection, alarm and control systems in order to impose electrical safety and performance protection for the building owner & user. Many organizations and authorities participated, in a partial or full capacity, in the process of establishing codes and standards, i.e., recommending, developing, writing, establishing consensus, preparing and publishing, and enforcing protective standards. OSHA (Occupational Safety and Health Administration) OSHA establishes and enforces protective standards to save lives, prevent injuries, and protect the health of America s workers. NFPA (National Fire Protection Association) The NFPA establishes fire safety standards, including those standards for the safe operation of process. ANSI (American National Standards Institute) ANSI is a private, non-profit organization that administers, promotes, and facilitates the U.S. voluntary consensus standards and conformity assessments. ANSI is also the official U.S. representative to the International Electrotechnical Commission (IEC) and the International Organization for Standardization (ISO). The National Electric Manufacturers Association (NEMA) publishes a number of their standards. ISA (Instrument Society of America) ISA is globally recognized as a standard writing organization, developing consensus standards and protecting facilities from flammable hazards. UL (Underwriters Laboratories) UL is an independent, non-profit organization. They participate in developing standards to enhance public safety, preserve the environment, and facilitate trade. In addition, UL is a NTRL (Nationally Recognized Testing Laboratory), approved by OSHA. International CSA (Canadian Standard Association) CSA is a non-profit association serving business, industry, government and consumers in Canada and the global marketplace. They work to develop standards to enhance public safety, preserve the environment, and facilitate trade. In addition, CSA is a NTRL (Nationally Recognized Testing Laboratory), approved by OSHA. IEC (International Electrotechnical Commission) IEC is the leading global organization that prepares and publishes international standards for all electrical, electronic and related technologies. These serve as a basis for national standardization. Specifications subject to change without notice. USA Page 4 of 10
5 EU (European Union) The EU is a treaty-based, framework institution that defines and manages economics and political cooperation. The EU covers many issues, such as the environment, agriculture, trade, energy and transport, and mandates various standards, and directives to which manufacturers must comply. The following is a list of directives to which gas detection equipment manufacturer must comply. EC (European Conformity) The CE Mark is the official marking required by the European Community for all electric and electronic equipment that will be sold, or put into service, anywhere in the European community. It ensures that a product fulfills all essential safety and environmental requirements as defined by the EU (European Union) through the European Directives. ATEX (Atmosphere Explosive) The ATEX Directives are EU (European Union) legislation enforced since July 1, They are intended to standardize, clarify, and improve the way in which equipment used in explosive atmospheres is modified, utilized, and maintained across the EU. The purpose of the directives is to align technical and legal standards while promoting the free movement of goods throughout the EU. EMC (Electromagnetic Compatibility) The EMC Directives set essential apparatus protection requirements while dictating the electromagnetic disturbance a product may generate or be immune to. The directives are in accordance with EU standards defining the technical requirements necessary to achieve the required level of protection. The EMC Directives are applied to electrical equipment and components, domestic appliances, and industrial appliances. LVD (Low Voltage Directive) The LVD Directives apply to all electrical equipment. They are designed to operate in the voltage range of VAC or VDC. The Directives ensure that all electrical and electronic equipment placed on the market in the EU is safe. For more details and specific information, visit the websites of the appropriate organization and/or government authorities. Any carbon monoxide (CO) detection system selection done by specifying engineers, installers and building owners should include solutions that are in compliance with industry standards. Every HVAC, Security, Controls and Building professional should understand the differences between the American National Standard Institute (ANSI) and Underwriters Laboratories (UL) standards ANSI/UL 2075, ANSI/UL 2017 and ANSI/UL 2034, and be aware of the new ANSI/UL2075 requirement that became effective at the end of Specifications subject to change without notice. USA Page 5 of 10
6 4 Certified and Listed Products (Conforms to ANSI/UL Standards) Major Authorized NRTL CSA Canadian Standard Association (also known as CSA International) FM FM Approvals LLC (formerly Factory Mutual Research) INTERTEK / ITSNA Intertek Testing Services NA, Inc. (formerly ETL) TUV / TÜV TÜV SÜD America, Inc. (TUVAM) TÜV SÜD Product Services GmbH (TUVPSG) TÜV Rheinland of North America, Inc. (TUV) UL Underwriters Laboratories Inc. An additional six (6) approved/certified NRTL companies are available visit OSHA s website for details. Only CSA, Intertek and UL are currently certified to test to Standard ANSI/UL Nationally Recognized Testing Laboratory NRTL An organization that is approved by OSHA (Occupational Safety and Health Administration) to independently test, certify and conform electrical instrumentation and control products to the appropriate standards, and to provide product listing and labeling. Only choose CO product solutions that have the appropriate NRTL listing and label. Existing USA Standards and Certification applicable for Carbon Monoxide Detectors, Transmitters & System Controllers For Scope / Applications (key excerpts) Standards Title Applies to the following electrical products and applications: ANSI/UL 2075 Standards for Safety Gas, Vapor Detectors and Sensors/Transmitters. Commercial Buildings Commercial Buildings Multi-gas sensors/transmitters Multi-gas detectors Solely for control of ventilation or shutting off devices such as fans or control valves For operating as part of gas detection or emergency signaling systems Note: It is not appropriate to use ANSI/UL 2075 "residential type of detectors for commercial applications. Includes ANSI/UL 2034 Comments: Standard ANSI/UL 2075 incl. sensor/transmitter performance tests, and sensitivity testing to ANSI/UL 2034 NFPA in their application standard NFPA 720, 2009 edition, for installation of CO detection and warning equipment, states: Each carbon monoxide detector (senor/transmitter) shall be in compliance with ANSI/UL Also, gas and vapor detectors (sensors/ transmitters) shall meet the sensitivity tests and alarm thresholds of ANSI/UL 2034, the standard for single and multiple station carbon monoxide alarms. Specifications subject to change without notice. USA Page 6 of 10
7 Applies to the following electrical products and applications: ANSI/UL 2017 Standard for Safety General-Purpose Signaling Devices and Systems. Commercial Buildings Commercial Buildings Commercial Buildings Residential Dwellings Self-monitored devices or systems are intended to be self-monitoring. These devices are intended for, but not restricted to, commercial use. A product a covered by these requirements consists of a unit assembly of electrical parts having provision for the connection of power supply circuits routed through the equipment by a prescribed scheme of circuiting. Circuits extending from the products connect to separate devices by which the operating part of the product is actuated for signals, and to separate and/or integral devices by which the signals are indicated so as to form a coordinated system combination for definitive signaling services. An installation wiring diagram attached to the product, or referenced in the product marking, indicates the devices and circuits which have been determined to be capable of being used with the product in the field. Installed and used in accordance with the National Electrical Code, NFPA 70. Applies to the following electrical products: Control equipment Test and measurements Laboratory equipment Accessories Applies to electrical alarms intended for: Indoor locations of dwelling units Recreational vehicles Mobile homes Boats, enclosed spaces ANSI/UL IEC ANSI/UL 2034 Comments: Commercial CO detection and control systems for parking garages (i.e., a central control unit connected with multiple sensors/transmitters, analog or digital bus types), located across the parking space controlling ventilation and alarming, shall be certified products conforming to: - ANSI/UL 2017 for controller/central control unit - ANSI/UL 2075 for sensors/transmitter (detectors) Standards for Safety Electrical Equipment for measurement, control, and laboratory. Comments: Standard ANSI/UL does not include sensor/transmitter performance testing. For commercial garage CO detection and control systems, the latest revised standards call for products with NRTL certification that conforms to ANSI/UL 2075 (CO sensors/transmitters) and ANSI 2017 (central control units). Many local authorities (building and safety departments), are known for strict enforcement of local codes and standards within their jurisdiction. This includes the cities of Los Angeles, San Diego, Chicago, Orlando, New York City, as well as the states of North Carolina, Oregon and Florida. The building inspectors will look for the appropriate NRTL listing on the installed products. Standard for Safety single and multiple station CO alarms. Comments: Products NRTL certified to ANSI/UL 2034 are intended for residential applications and should not be connected to a commercial central control and alarm system panel. Note: For the complete and exact definition (title, scope, etc.), please refer to the officially issued standards available through the respective organizations, i.e., OSHA, NFPA, ANSI and/or any NRTLs. Specifications subject to change without notice. USA Page 7 of 10
8 5 State & City Authorities and Building Inspectors State and local inspectors, who are empowered by their authority having jurisdiction (AHJ), have universally adopted the National Fire Protection Agency, standard NFPA 70, also known as the National Electrical Code (NEC). Some authorities and their inspectors are known for strict enforcement beyond the local electrical codes and may require the installed CO detectors (sensors/transmitters) and controllers to be NRTL listed. Los Angeles, San Diego, Chicago, Orlando, New York City, and as well the states of North Carolina, Oregon and Florida are some examples. The inspector or building official may red tag installed, unlabeled equipment as unfit for operation until the applicable product safety requirement is met or replaced with a NRTL listed product. Local authorities, building owners and operators have been dissatisfied in the past with many of the substandard commercial carbon monoxide (CO) detection equipment, which emphasized electrical safety only. The new ANSI/UL 2075 standard was eventually developed and adopted to address both electrical safety and product performance. The National Fire Protection Association (NFPA) in their application standard NFPA 720, 2009 edition, for installation of CO detection and warning equipment, states: Each carbon monoxide detector shall be in compliance with ANSI/UL Also, gas and vapor detectors and sensor/transmitters shall meet the sensitivity tests and alarm thresholds of ANSI/UL 2034, the standard for single and multiple station carbon monoxide alarms. Only install CO solutions which have been thoroughly performance tested and their product specifications accurately verified. Specifications subject to change without notice. USA Page 8 of 10
9 6 Performance Various designed and manufactured CO sensors/transmitters offer differing levels of accuracy, repeatability, detection with or without cross sensitivity to other gases, and sensor element life span. These factors will influence the performance and operating costs of the mechanical and CO detection system. The market offers mainly two types of CO gas sensing element technologies for commercial garage applications electrochemical and solid state Technology Accuracy PPM CO Life Span Features Electrochemical Type High Accuracy < +/ years Detects the true level of CO in ppm Reduced drift High accuracy & reduced drift means fewer calibration intervals Electrochemical Type Standard +/- 3 < 5 years Solid State / Semiconductors (MOS) Type 1 Solid State / Semiconductors (MOS) Type 2 +/- 7 to years Unknown 2.5 years Solid state sensors: Are cross sensitive and prone to false alarm Subject to drifts of readings at sizeable space, temperature and/or humidity change Require more frequent calibration intervals The CO central controller should have the capability to fulfill all required sequence of operation, provide selfdiagnostic with malfunction warning, intelligently identify each individual sensor/transmitter s detection value and local and remote alarms, and sensor element s End-of-Life (EOL) fail-safety alarm. Review the product data sheet s specifications and select the solution that will secure an economical installation, provide safety and performance to fit the mechanical system design, and lower calibration intervals. Specifications subject to change without notice. USA Page 9 of 10
10 7 The Right Choice The analog or digital multi-point bus CO detection and control systems for commercial parking structures should provide: Sensor/transmitter: NRTL Performance Tested & Certified, conforming to STD ANSI/UL 2075 Central Controller: NRTL Tested & Certified, conforming to STD ANSI/UL 2017 Specifications subject to change without notice. USA Page 10 of 10
https://www.osha.gov/dts/otpca/nrtl/recgterm.html.
Nationally Recognized Testing Laboratory Certification Markings and Labels Nationally Recognized Testing Laboratories (NRTLs) use the following marks to certify products for purposes of Occupational Safety
Navigating The Product Certification Maze: Building Codes and Product Standards. AGENDA be Covered
AGENDA be Covered Navigating The Product Certification Maze: Understanding the Product Testing & Certification Process and Certification Marks BSC Course No. 49-6664 Presenter: Lisa Reiheld, CSA Group
Setting the Standard in Third-party Certification
Setting the Standard in Third-party Certification 1 Benefits enjoyed by FM Approvals customers FM Approvals can help you: Meet client demands Fulfill jurisdictional requirements Differentiate your product
NEMA Applications Guide
Page 3 NEMA Applications Guide Carbon Monoxide Alarms and Detectors Published by National Electrical Manufacturers Association 1300 North 17 th Street, Suite 1752 Rosslyn, Virginia 22209 www.nema.org Page
AUGUST 2016 CONTENTS:
EMC SERVICES NEWSLETTER AUGUST 2016 CONTENTS: RECENT STANDARD CHANGES NEW FCC REGULATIONS IEC 60601-1-2 4TH EDITION LOW VOLTAGE DIRECTIVE EU DIRECTIVES EMC DIRECTIVE 2014/30/EU KOREA UPDATE: KN32/35 1.
Guidelines for the Design Engineer
Carbon Monoxide (CO) Detection and Control Systems for Parking Structures Guidelines for the Rev 1.13 1 General Overview... 3 1.1 Carbon Monoxide and Its Effects... 3 2 Installation and Application Codes
Hydrogen Equipment Certification Guide. Listing, Labeling, and Approval Considerations
Hydrogen Equipment Certification Guide Listing, Labeling, and Approval Considerations January 2017 DISCLAIMER This guide was prepared as an account of work sponsored by an agency of the United States Government.
Certification Supplement Manual
SERVOTOUGH FluegasExact (2700) Gas Analyser Certification Supplement Manual Part Number: 02700008D Revision: 5 Language: UK English Blank CONTENTS 1 INTRODUCTION 2 EU DECLARATION OF CONFORMITY 3 EUROPEAN
International Product Compliance and Certifications. Product Safety Consulting, Inc.
International Product Compliance and Certifications - USA - Canada - Europe - Other International - CB Scheme Agenda This was the only mark. Now, these are the marks A bit of history.. UL founded in 1894
Navigating the Safety Certification Process for LED Lighting Products Todd Straka, Director Lighting Services
Navigating the Safety Certification Process for LED Lighting Products Todd Straka, Director Lighting Services www.intertek.com/lighting 1 Identifying Product Safety Requirements for Your Target Markets
Products Solutions Services CT287. Hazardous Area Classifications and Protection Systems
Products Solutions Services CT287 Hazardous Area Classifications and Protection Systems Slide 1 Topics covered Types of Hazardous Area classifications with focus on North America Types of hazardous protection
CE marking & your legal obligations
CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment
Guide to Hazardous Location Approvals: MICRO SWITCH Hazardous Area Limit Switches
Guide to Hazardous Location Approvals: MICRO SWITCH Hazardous Area Limit Switches A Selection Guide Introduction There are many considerations when selecting a switch to be used in hazardous areas. In
Guide to Hazardous Location Approvals:
Selection Guide Guide to Hazardous Location Approvals: MICRO SWITCH Hazardous Area Limit Switches Introduction There are many considerations when selecting a switch to be used in hazardous areas. In addition
Executive Summary. Shell Offshore Inc. BY: Keith M. Gonzales Sr., P.E. Regulatory Requirements for Hazardous Locations
Contents Executive Summary... 1 Regulatory Requirements in the Gulf of Mexico for Hazardous Locations... 2 Referenced Codes and Standards... 2 Memorandum of Agreement... 2 Bureau of Ocean Energy Management
Medical devices and electromagnetic compatibility. Addressing the requirements of IEC , 4 th Edition
Medical devices and electromagnetic compatibility Addressing the requirements of IEC 60601-1-2, 4 th Edition Executive Summary Risk of electromagnetic interference and immunity have long been important
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
CE Marking and Technical Standardisation
EDITION 3.0 CE Marking and A G A M B I C A T E C H N I C A L G U I D E Technical Standardisation Guidelines for application to Electrical Power Drive Systems CE Marking and Technical Standardisation Guidelines
User Manual. PolyGard CO LC-1112 V3. Electrochemical analog carbon monoxide transmitters serial no. EC-S 002. August 29, 2006
PolyGard CO LC-1112 V3 Electrochemical analog carbon monoxide transmitters serial no. EC-S 002 User Manual August 29, 2006 January 04, 2016 Revision Specifications subject to change without notice. USA
SPECIFICATION MODEL 5200 GAS MONITOR SYSTEM. User Instructions For The Model 5200 Gas Monitor System
SPECIFICATION MODEL 5200 GAS MONITOR SYSTEM User Instructions For The Model 5200 Gas Monitor System To completely customize the specifications to your exact application, modifications to the following
Integrating Fire and Gas Safety with Process Control Systems:
WHITE PAPER Integrating Fire and Gas Safety with Process Control Systems: Why, What and How If a fire, smoke or gas leak is detected in an industrial facility, prescriptive actions must be taken by the
Intrinsically Safe Transmitters, Option Code 2n
Installation Manual for Intrinsically Safe Transmitters, Option Code 2n ATEX PERSONAL INJURY WARNING DO NOT USE these products as safety or emergency stop devices or in any other application where failure
Instruction Manual. CAT 100 & CAT 200 Continuous Analyzer Transmitter Addendum for Hazardous Area Applications. 3 rd Edition 05/2007
CAT 100 & CAT 200 Continuous Analyzer Transmitter Addendum for Hazardous Area Applications 3 rd Edition www.emersonprocess.com CAT 100 & CAT 200 Addendum for Hazardous Area Applications ESSENTIAL INSTRUCTIONS
Case Study. INTEGRATING Fire & GAS SAFETY WITH PROCESS CONTROL SYSTEMS
INTEGRATING Fire & GAS SAFETY WITH PROCESS CONTROL SYSTEMS INTEGRATING Fire & GAS SAFETY WITH PROCESS CONTROL SYSTEMS If a fire, smoke or gas leak is detected in an industrial facility, prescriptive actions
Certification Supplement Manual
PROCESS ANALYSERS SERVOTOUGH FluegasExact (2700) Gas Analyser Certification Supplement Manual Part Number: 02700008D Revision: 2 Language: UK English Blank CONTENTS 1 INTRODUCTION 2 EC DECLARATION OF CONFORMITY
Carbon Monoxide Detection in Buildings Frequently Asked Questions
What is carbon monoxide? Carbon Monoxide Detection in Buildings Frequently Asked Questions Carbon monoxide (CO) is a colorless, odorless, tasteless, poisonous gas that is produced by the incomplete burning
Hydrogen Sensor Testing and Certification Underwriters Laboratories Inc.
Hydrogen Sensor Testing and Certification 2011 Underwriters Laboratories Inc. Underwriters Laboratories Inc. Working for a safer world since 1894 2011 Underwriters Laboratories Inc. Overview Introduction
Certificate of Compliance
FF0 001 Certificate of Compliance Certificate: 70116284 (LR 064969_0_00) Issued to: Mine Safety Appliances Company North American Division 1000 Cranberry Woods Dr Cranberry Township, Pennsylvania 16066-5296
Valve Manufacturers Association of America
BUSINESS ASSURANCE Valve Manufacturers Association of America 2016 Technical Seminar: EU s New Legislation Framework (NLF) - What this means to you. Mike Norman 1 VMA Technical Session - March 2016 SAFER,
Legislation, Standards and Technology. Figure 1: 1897 Approved Electrical Fittings
Legislation, Standards and Technology FM Approvals Roots in the industrial revolution 1835 and the development to present by John Rennie and Bill Lawrence Figure 1: 1897 Approved Electrical Fittings In
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60770-3 First edition 2006-04 Transmitters for use in industrial-process control systems Part 3: Methods for performance evaluation of intelligent transmitters IEC 2006 Copyright
Certificate of Compliance
FF0 001 Certificate of Compliance Certificate: 70116279 (LR 025993_0_000) Issued to: General Monitors, Incorporated 26776 Simpatica Circle Lake Forest, California 92630 USA Attention: Larry Vlagea The
Energy Efficiency Schemes Brief Introduction
Energy Efficiency Schemes Brief Introduction Intertek is the leading international provider of quality and safety services to a wide range of global and local industries. Partnership with Intertek brings
SAFETY MANUAL. Electrochemical Gas Detector GT3000 Series Includes Transmitter (GTX) with H 2 S or O 2 Sensor Module (GTS)
SAFETY MANUAL Electrochemical Gas Detector GT3000 Series Includes Transmitter (GTX) with H 2 S or O 2 Sensor Module (GTS) Sensor Module (GTS) Transmitter (GTX) Detector (GT3000) SAFETY CERTIFIED GT3000
New Legal Framework Carlo Casati
New Legal Framework Carlo Casati Milan, 1 April 2016 Summary New Legislative Framework Market Surveillance Conformity Assessment CE Marking 2 06.11.2013 NOTIFIED BODY TRAINING 01 New Legislative Framework
Session Eight: It s Not Rocket Science Unless You Do It Wrong
Session Eight: It s Not Rocket Science Unless You Do It Wrong Dave Adams Technical Advisor Hazardous Locations Equipment: Canadian Standards Association International Abstract The certification of hazardous
CE marking & your legal obligations
CE marking & your legal obligations This presentation is intended to provide a practical approach guide to what you need to know about the CE marking requirements for electrical and electronic equipment
The Process of making European Standards. Frank Moore Chairman CEN TC/248 Textiles
The Process of making European Standards Frank Moore Chairman CEN TC/248 Textiles 1 European Standards CEN & CENELEC systems Standards development process Links to legislation International dimension What
Understanding Hazardous Locations Concepts
Gas Well Deliquification Workshop Sheraton Hotel, February 23 26, 2014 Understanding Hazardous Locations Concepts Mark Scantlebury, P. Eng., BASc President and CEO Extreme Telematics Corp. Disclaimer The
FINAL REPORT ON THE 4 TH JOINT CROSS-BORDER EMC MARKET SURVEILLANCE CAMPAIGN (2011) LED LIGHTING PRODUCTS
FINAL REPORT ON THE 4 TH JOINT CROSS-BORDER EMC MARKET SURVEILLANCE CAMPAIGN (2011) LED LIGHTING PRODUCTS 1 CONTENTS S/N ITEM PAGE A. EXECUTIVE SUMMARY 3 B. ELEMENTS OF THE CAMPAIGN 5 1. Reasons for the
Safety Evaluation of Luminaires and Self Ballasted Lamps. 1
Safety Evaluation of Luminaires and Self Ballasted Lamps www.intertek.com 1 Topics Quick Overview of Intertek s Services for Lighting stream How to bundle Safety, Hazardous Location, EMC, and Performance
Transition to a New Hazard Based Safety Standard, IEC
Transition to a New Hazard Based Safety Standard, IEC 62368-1 Overview and Updates on IEC 62368-1 - the new Standard for Audio/Video, Information Technology and Communications Technology Equipment Kevin
Compilation of regulatory approaches used in various countries. Information received by the Secretariat through a survey in 2009
Compilation of regulatory approaches used in various countries Information received by the Secretariat through a survey in 2009 At its seventeenth session, the Working Party mandated the Sectoral Initiative
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61514-2 First edition 2004-01 Industrial process control systems Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs IEC 2004
The European Standardization System. Diana Dus Programme Manager International Cooperation
The European Standardization System Diana Dus Programme Manager International Cooperation The European Standardization Organizations (ESOs) CEN... (European Committee for Standardization) CENELEC... (European
Setting the alarms in electrochemical sensor equipped toxic gas instruments
: Setting the alarms in electrochemical sensor equipped toxic gas instruments out of the area before rather than after the concentration of toxic gas exceeds the hazardous condition threshold. Unfortunately,
NCEHSA Conference. Carbon Monoxide Detector Regulations for Lodging Establishments (S.L )
NCEHSA Conference Carbon Monoxide Detector Regulations for Lodging Establishments (S.L. 2013-413) 1 Purpose of this session The purpose of this session is to review the provisions of Session Law 2013-413
Explosive atmospheres Part 29-2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen
IEC 60079-29-2 Edition 2.0 2015-03 REDLINE VERSION colour inside Explosive atmospheres Part 29-2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen
Why AC800M High Integrity is used in Burner Management System Applications?
Why AC800M High Integrity is used in Burner Management System Applications? Prepared by: Luis Duran Product Marketing Manager Safety Systems ABB Process Automation/Control Technologies TÜV Functional Safety
Guide to Intrinsically Safe Portable Radios
Guide to Intrinsically Safe Portable Radios An overview of common IS standards www.taitradio.com GUIDE TO INTRINSICALLY SAFE PORTABLE RADIOS SUMMARY The development of equipment for explosive atmospheres
SAFETY MANUAL. IR5000 Open Path Hydrocarbon Gas Monitoring System
SAFETY MANUAL Open Path Hydrocarbon Gas Monitoring System The information and technical data disclosed in this document may be used and disseminated only for the purposes and to the extent specifically
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-30262-7 SOUTH AFRICAN NATIONAL STANDARD The installation, inspection and maintenance of equipment used in explosive atmospheres Part 1: Installations including surface installations on mines
COPYRIGHT ULC STANDARDS
CANADIAN CODES & ULC STANDARDS: AN OVERVIEW Mahendra (Mike) Prasad, C.E.T. Manager, International Standards CFAA Alberta Technical Seminar October 17, 2012 2011 Underwriters Laboratories Inc. 1 H T U LC
Erik Leider Project Engineer Hazardous Locations, Gas & Oil Underwriters Laboratories
Hazardous Locations: Understanding the Basics of Global Compliance Requirements Erik Leider Project Engineer Hazardous Locations, Gas & Oil Underwriters Laboratories DISCLAIMER/ TERMS OF USE: THE INFORMATION
What does doesn t a power supply have to comply with these days!
What does doesn t a power supply have to comply with these days! Sinziana-Iulia Cionca - Excelsys Technologies Ireland Christopher Siegl Excelsys Technologies North America March 29, 2017 Agenda Why comply
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60079-29-2 Edition 2.0 2015-03 Explosive atmospheres Part 29-2: Gas detectors Selection, installation, use and maintenance of detectors for flammable gases and oxygen INTERNATIONAL
Industrial Machinery Standards:
NFPA 79 for the US in comparison to IEC / EN 60204-1 (2016 Edition) Intertek 70 Codman Hill Road Boxborough, MA 01719 www.intertek.com/hazloc 1-800-WORLDLAB icenter@intertek.com Introduction Every year,
Record of Amendments. Version Date Amendment Section/page affected
Industry support for effective compliance BTHA Guidance - The Low Voltage Directive (LVD) Directive 2014/35/EU On the harmonisation of the laws of the Member States relating to the making available on
NEW ENERGY IN THE BATTERY INFRASTRUCTURE
NEW ENERGY IN THE BATTERY INFRASTRUCTURE Maurice H. Johnson Business Development Engineer UL LLC Northbrook, IL Paper Overview Over the past several years, there has been a significant effort to address
(1135/2016) Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland
Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland Electrical Safety Act (1135/2016) By decision of Parliament, the following is enacted:
Nitrogen Dioxide (NO2) Single-Point Gas Detection System
Nitrogen Dioxide (NO) Single-Point Gas Detection System DESCRIPTION Wall-mounted gas monitor with built-in nitrogen dioxide (NO)/diesel fume gas sensor, accepts one analog remote device such as a secondary
A Building Manager s Guide to Maintaining Fire Code Compliance
A Building Manager s Guide to Maintaining Fire Code Compliance Know your role in conducting fire protection system inspections : Fire Alarm Codes and Standards Maintaining your compliance with fire code
Certificate of Compliance
FF02 Certificate of Compliance Certificate: 70068210 Issued to: Cascade Technologies Ltd Glendevon House, Castle Business Park, Stirling, Scotland. UNITED KINGDOM FK9 4TZ Attention: Mr M Douglas. The products
EU Declaration of Conformity
16 May 2017 EU Declaration of Conformity Model Number: ET1215L Series Equipment Category: Information Technology and Telecommunications Equipment Equipment Class: Commercial and Light Industrial Product
HazLoc Essential Guides:
HazLoc Essential Guides: Intertek Deeside Lane, Chester, CH1 6DD UK hazloc@intertek.com +44 1244 882590 www.intertek-hazloc.com Contents Contents... 1 Introduction... 1 Introduction to Ex... 1 ATEX Overview...
Meeting NFPA standards for
24 Fire safety Meeting NFPA standards for flame, smoke and gas detection Fire is one of the most critical hazards in any built environment, and industrial processes and facilities that involve volatile
SECTION ULTRASONIC TRANSIT TIME CLAMP-ON FLOW MEASURING SYSTEM
SECTION 40 71 66 ULTRASONIC TRANSIT TIME CLAMP-ON FLOW MEASURING SYSTEM PART 1-GENERAL 1.01 SUMMARY A. Ultrasonic clamp-on flow measurement system designed for non-intrusive external to pipe measurement
GLOBAL ENCLOSURE STANDARDS WITHIN THE ELECTRICAL INDUSTRY
GLOBAL ENCLOSURE STANDARDS WITHIN THE ELECTRICAL INDUSTRY Industry standards for electrical enclosures exist to promote safety, encourage design efficiency and define minimum levels of product performance.
This is a preview - click here to buy the full publication. IEC Quality Assessment System for Electronic Components (IECQ System)
QC 080000 Edition 3.0 2012-05 IECQ PUBLICATION IEC Quality Assessment System for Electronic Components (IECQ System) Hazardous Substance Process Management System Requirements (HSPM) INTERNATIONAL ELECTROTECHNICAL
Florida Building Code Chapter 9 Fire Protection Systems Advanced Course
Florida Building Code 2010 Chapter 9 Fire Protection Systems Advanced Course 1 Introduction This course will cover specific sections of Chapter 9 that relate to fire alarm systems. While many contractors
COMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 8.3.2018 C(2018) 1392 final COMMISSION DELEGATED REGULATION (EU) /... of 8.3.2018 establishing common safety methods on safety management system requirements pursuant to Directive
Rosemount 4500 Hygienic Pressure Transmitter. Start
Quick Installation Guide June 2007 Rosemount 4500 Rosemount 4500 Hygienic Pressure Transmitter ProductDiscontinued Start Step 1: Mount the Transmitter Step 2: Set the Switches Step 3: Connect Wiring and
Instruction Manual Analog Vortex Mixer with Fixed Cup Head
Instruction Manual Analog Vortex Mixer with Fixed Cup Head Table of Contents Package Contents............ 1 Warranty............ 1 Installation............ 2 Maintenance & Servicing............ 2 Environmental
Oxygen (O2) Single-Point Gas Detection System
Oxygen (O) Single-Point Gas Detection System DESCRIPTION Wall-mounted gas monitor with built-in oxygen (O) sensor, accepts one analog remote device such as a secondary gas sensor, temperature or humidity
BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY
Page: 1 BUSINESS PLAN CEN/TC 164 WATER SUPPLY EXECUTIVE SUMMARY Business Environment Nearly almost 100% of the 450 M European people are supplied with drinking water (DW) Europe represents approximately
Test Report. Appliance EMF Testing
Project: 11014506A Date: November 6, 2015 Model: 120V_WWF13NW Test Report On Appliance EMF Testing Copyright 2005 UL LLC UL LLC authorizes the above-named company to reproduce this Report provided it is
Two-Channel Gas Controller
Two-Channel Gas Controller Specifications subject to change without notice. USA 09 Page of DESCRIPTION Highly configurable, UL 0 performance-tested and -certified, and wall-mounted gas monitor; continuously
Riverside County Fire Department Office of the Fire Marshal Market St., Ste. 150, Riverside, CA Ph. (951) Fax (951)
Riverside County Fire Department Office of the Fire Marshal 2300 Market St., Ste. 150, Riverside, CA 92501 Ph. (951) 955-4777 Fax (951) 955-4886 Technical Policy Title: Plant Processing and Extraction
American National Standard. for Roadway and Area Lighting Equipment Solar Lighting Systems ANSI C Secretariat:
ANSI C136.40-2014 American National Standard for Roadway and Area Lighting Equipment Solar Lighting Systems Secretariat: National Electrical Manufacturers Association Approved July 17, 2014 Published September
Fire protection in hazardous locations:
WHITE PAPER Fire protection in hazardous locations: Meeting NFPA standards for flame, smoke and gas detection Fire is one of the most critical hazards in any built environment, and industrial processes
EMC Regulatory Requirements: What you need to know for the EU, EAEU & Australia. Dr Alex Martin
EMC Regulatory Requirements: What you need to know for the EU, EAEU & Australia Dr Alex Martin C&R Webinar, 29 May 2018 Agenda What is EMC? Why has EMC legislation been introduced? The 2014 EU EMC Directive.
Intrinsic Safety. Intrinsically Safe Solutions. Accurate Weighing in Hazardous Areas
Intrinsic Safety Intrinsically Safe Solutions Accurate Weighing in Hazardous Areas Accidents in hazardous areas can have dramatic consequences for businesses in terms of both human life and profit. Intrinsically
Electromagnetic Compatibility of Alarm Systems
Electromagnetic Compatibility of Alarm Systems Jan VALOUCH Tomas Bata University in Zlin, Faculty of Applied Informatics, Nad Stráněmi 4511, 76005, Zlín, Czech Republic valouch@fai.utb.cz. Abstract. Alarm
Harmonizing Electrical Installation Requirements
Harmonizing Electrical Installation Requirements 110 Years, 50 Editions Origin of the National Electrical Code First meeting held on March 18-19, 1896 in New York City 23 persons in attendance American
The New EMC Directive 2004/108/EC
The New EMC Directive 2004/108/EC In the process of this review I have tried to spell out in words what is often referred to as a section number while also keeping to location information as used in the
ISO INTERNATIONAL STANDARD. Oscillation-type density meters Part 1: Laboratory instruments
INTERNATIONAL STANDARD ISO 15212-1 First edition 1998-10-01 Oscillation-type density meters Part 1: Laboratory instruments Densimètres à oscillations Partie 1: Instruments de laboratoire A Reference number
FIRE & LIFE SAFTEY STANDARD
Title: Effective Date: 01/01/14 Revised Date: 1/1/14 Code References: Title 16, Chapter 16.16 of the Roseville Municipal Code, NFPA 72 Note: This standard is a summary of Fire Department clarifications
Numerical Standards Listing
Numerical Standards Listing ISA-RP2.1-1978 - Manometer Tables ISA-5.1-1984 (R1992) - Instrumentation Symbols and Identification (Formerly ANSI/ISA-5.1-1984 [R1992]) ISA-5.2-1976 (R1992) - Binary Logic
S5000 Gas Monitor. GMS5000.com
S5000 Gas Monitor GMS5000.com A DETECTOR AS TOUGH AS YOU ARE... LOWER TEMPERATURE SPEC?... ARCTIC WINTERS IT HAS TO BE THE MOST RELIABLE PIECE OF EQUIPMENT OUT HERE IF THE DETECTOR DOESN T WORK, WE DON
Certificate of Compliance
Certificate of Compliance Certificate: 70067850 Date Issued: July 28, 2017 Issued to: Otis Instruments, Incorporated 301 S. Texas Ave. Bryan, Texas, 77803 USA Attention: Nicholas Sandera The products listed
9/7/2010. Chapter , The McGraw-Hill Companies, Inc. AND BONDING. 2010, The McGraw-Hill Companies, Inc.
Chapter 1 GROUNDING AND BONDING 1 Proper grounding practices protect people from the hazards of electric shock and ensure the correct operation of overcurrent protection devices. Grounding is the intentional
BUSINESS PLAN CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 162 Business Plan Page: 1 CEN/TC 162 PROTECTIVE CLOTHING INCLUDING HAND AND ARM PROTECTION AND LIFEJACKETS EXECUTIVE SUMMARY Business Environment CEN/TC 162 is preparing standards
Digital Gas Transmitters with Auxiliary Inputs & Control. PolyGard 2 DC6
Digital Gas Transmitters with Auxiliary s & Control Specifications subject to change without notice. USA 181011 Page 1 of 5 DESCRIPTION Digital RS-485 communicating, addressable toxic and combustible gas
ARTICLE 25. FUEL GAS CODE
ARTICLE 25. Rule 1. Indiana Fuel Gas Code, 2003 Edition (Repealed) (Repealed by Fire Prevention and Building Safety Commission; filed Mar 18, 2008, 2:32 p.m.: 20080423-IR-675070479FRA, eff 90 days after
Numerical Standards Listing
ISA-RP2.1-1978 - Manometer Tables Numerical Standards Listing ANSI/ISA-5.1-1984 (R1992) - Instrumentation Symbols and Identification ANSI/ISA-5.2-1976 (R1992) - Binary Logic Diagrams for Process Operations
Controllers. Instruction Manual WARNING
Controllers Instruction Manual WARNING THIS MANUAL MUST BE CAREFULLY READ BY ALL INDIVIDUALS WHO HAVE OR WILL HAVE THE RESPONSIBILITY FOR INSTALLING, USING OR SERVICING THIS PRODUCT. Like any piece of
PIP PCTPA001 Testing of Process Analyzer Systems
January 2016 Process Control PIP PCTPA001 Testing of Process Analyzer Systems PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
The European Radio Equipment Directive 2014/53/EU
TÜV SÜD Slide 1 The European Radio Equipment Directive 2014/53/EU 28 March 2017 Meet the speaker behind the voice Jon Lea Senior Engineer (Product Certification), TÜV SÜD 30 years experience in the testing
Florida Building Code 2010
Introduction Florida Building Code 2010 Chapter 9 Fire Protection Systems This course will cover specific sections of Chapter 9 that relate to fire alarm systems. While many contractors are familiar with