Optical system Beam shape Sensing distance Resolution*1 Model Diffuse reflective Spot beam 40±10 mm 2 µm ZX-LD40
|
|
- Gary Washington
- 6 years ago
- Views:
Transcription
1 Smart Sensors (Laser Type) Z Series (Z-L-N). Ordering Information Sensors Sensor Heads (Reflective) Optical system Beam shape Sensing distance Resolution* Model Diffuse reflective Spot beam ± mm µm Z-LD ± mm 6 µm Z-LD ± mm µm Z-LD Line beam ± mm µm Z-LDL ± mm 6 µm Z-LDL ± mm µm Z-LDL Regular reflective Spot beam ± mm.5 µm Z-LDV Line beam Z-LDVL *. For an average count of,96. Sensor Heads (Through-beam) Optical system Measuring width Sensing distance Resolution* Model Through-beam -mm dia. to mm µm Z-LT 5 mm to 5 mm Z-LT5 mm Z-LT mm µm Z-LT *. For an average count of 6. Amplifier Units Appearance Power supply Output type Model DC NPN Z-LDA-N PNP Z-LDA-N Note: Compatible connection with the Sensor Head. Z Series (Z-L-N) Smart Sensors (Laser Type)
2 Accessories (Order Separately) Calculating Unit Appearance Z-CAL Model SmartMonitor Sensor Setup Tool for Personal Computer Connection Appearance Name Model Z-series Communications Interface Unit Z-SF Side-view Attachments Appearance Applicable Sensor Head Z-LT/ LT5 Z-LT Model Z-F Z-F CD-ROM + CD-ROM Z-series Communications Interface Unit + Z-series Sensor Setup Software Basic Z-series Sensor Setup Software Z-SFWEV ** Z-SWEV * *. When using the Z-LDA-N/-N with the SmartMonitor, either the Z- SFWEV or the Z-SWEV SmartMonitor must be used. Earlier versions cannot be used. *. The Z-SFWEV SmartMonitor can be used only to set functions and monitor waveforms. Cables with s on Both Ends (for Extension)* Cable length Model Quantity m Z-CA m Z-CA 8 m Z-C8A 9 m * Z-C9A *. Robot Cable models are also available. The model numbers are Z-C@R. *. For use only with Reflective Sensors. Z Series (Z-L-N) Smart Sensors (Laser Type)
3 Specifications Sensor Heads (Reflective) Item Model Z-LD Z-LD Z-LD Z-LDV Z-LDL Z-LDL Z-LDL Z-LDVL Optical system Diffuse reflective Regular reflective Diffuse reflective Regular reflective Light source (wave length) Visible-light semiconductor laser with a wavelength of 65 nm and an output of mw max. EN class, FDA class II Measurement point mm mm mm mm mm mm mm mm Measurement range ± mm ± mm ± mm ± mm ± mm ± mm ± mm ± mm Beam shape Spot Line Beam size* 5-µm dia. -µm dia. -µm dia. 75-µm dia. 75 µm x 5 µm x 5 µm x µm x.8 mm mm mm mm Resolution* µm 6 µm µm.5 µm µm 6 µm µm.5 µm Linearity* ±.% FS (entire range) ±.% FS (8 to mm) ±% FS ( to mm) ±.% FS (entire range) ±.% FS ( to 8 mm) ±.% FS (8 to mm) Temperature ±.% FS/ C (Except for Z-LD and Z-LDL, which are ±.% FS/ C.) characteristic* Ambient illumination Incandescent lamp:, l max. (on light receiving side) Ambient temperature Operating: to 5 C, Storage: 5 to 6 C (with no icing or condensation) Ambient humidity Operating and storage: 5% to 85% (with no condensation) Insulation resistance MΩ min. at 5 VDC Dielectric strength, VAC, 5/6 Hz for min Vibration resistance to 5 Hz,.7-mm double amplitude 8 min each in, Y, and Z directions (destruction) Shock resistance m/s times each in six directions (up/down, left/right, forward/backward) (destruction) Degree of protection IEC659, IP5 IEC659, IEC659, IP5 IP Connection method relay (standard cable length: 5 mm) Weight (packed state) Approx. 5 g Approx. 5 Approx. 5 g g Materials Accessories Case: PBT (polybutylene terephthalate), Cover: Aluminum, Lens: Glass Instruction sheet, Laser warning label (English) Case and cover: Aluminum, Lens: Glass ±% FS ( to mm) Case: PBT (polybutylene terephthalate), Cover: Aluminum, Lens: Glass ±.% FS (entire range) IEC659, IP Approx. 5 g Case and cover: Aluminum, Lens: Glass *. Beam size: The beam size is defined by /e (.5%) of the strength of the beam at the beam center (measured value). Incorrect detection may occur if there is light leakage outside the defined spot and the material around the sensing object is more reflective than the sensing object. *. Resolution: The resolution is the deviation (±σ) in the linear output when connected to the Z-LDA Amplifier Unit. (The resolution is measured with the standard reference object (white ceramic), at the measurement point with the Z-LDA set for an average count of,96 per period.) The resolution is given at the repeat accuracy for a stationary workpiece, and is not an indication of the distance accuracy. The resolution may be adversely affected under strong electromagnetic fields. *. Linearity: The linearity is given as the error in an ideal straight line displacement output when measuring the standard reference object. The linearity and measurement values vary with the object being measured. *. Temperature characteristic: The temperature characteristic is measured at the measurement point with the Sensor and reference object (OMRON s standard reference object) secured with an aluminum jig. Note: Highly reflective objects can result in incorrect detection by causing out-of-range measurements. Z Series (Z-L-N) Smart Sensors (Laser Type)
4 Sensor Heads (Through-beam) Item Model Z-LT Z-LT5 Z-LT Z-LT Optical system Through-beam Light source (wave length) Visible-light semiconductor laser with a wavelength of 65 nm EN class, FDA class II Maximum output. mw max..5 mw max.. mw max. Measurement width -mm dia. - to.5-mm dia. 5 mm mm mm Measurement distance to 5 mm 5 to, mm to 5 mm Minimum sensing 8-µm dia. 8- to 5-µm dia..5-mm dia. (opaque).-mm dia. (opaque).-mm dia. (opaque) object (opaque) (opaque) Resolution* µm * --- µm * µm * Temperature ±.% FS/ C ±.% FS/ C characteristic Ambient illumination Incandescent lamp:, l max. (on light-receiving side) Ambient temperature Operating: to 5 C, Storage: 5 to 7 C (with no icing or condensation) Ambient humidity Operating: 5% to 85% (with no condensation) Degree of protection IEC659, IP Connection method relay (standard cable length: 5 mm) Weight (packed state) Approx. g Approx. 5 g Cable length Extendable up to m with special extension cable. Materials Case Polyether imide Zinc die-cast Cover Polycarbonate Front filter Glass Tightening torque. N m max. Accessories Instruction sheet, Sensor Head-Amplifier Connection Cable Optical axis adjustment seal Mounting Bracket *. This value is obtained by converting the deviation (±σ) in the linear output that results when the sensor head is connected to the amplifier unit, into the measurement width. *. For an average count of 6. The value is 5 µm for an average count of. This is the value that results when a minimum sensing object blocks the light near the center of the -mm measurement width. *. For an average count of 6. The value is 5 µm for an average count of. *. For an average count of 6. The value is 5 µm for an average count of. Z Series (Z-L-N) Smart Sensors (Laser Type)
5 Amplifier Units Item Model Z-LDA-N Z-LDA-N Measurement period 5 µs Possible average count settings* Temperature characteristic Linear output* Judgement outputs ( outputs: HIGH/PASS/LOW)* Laser OFF input, zero reset input, timing input, reset input,,, 8, 6,, 6, 8, 56, 5,,,,8, or,96 When connected to a Reflective Sensor Head:.% FS/ C, When connected to a Through-beam Sensor Head:.% FS/ C to ma/fs, Max. load resistance: Ω, ± V (± 5 V, to 5 V *), Output impedance: Ω NPN open-collector outputs, VDC, 5 ma max. Residual voltage:. V max. ON: Short-circuited with -V terminal or.5 V or less OFF: Open (leakage current:. ma max.) PNP open-collector outputs, VDC, 5 ma max. Residual voltage: V max. ON: Supply voltage short-circuited or supply voltage within.5 V OFF: Open (leakage current:. ma max.) Functions Measurement value display, present value/set value/light level/resolution display, scaling, display reverse, display OFF mode, ECO mode, number of display digit changes, sample hold, peak hold, bottom hold, peak-to-peak hold, self-peak hold, self-bottom hold, average hold, delay hold, intensity mode, zero reset, initial reset, ON-delay timer, OFF-delay timer, one-shot timer, deviation, previous value comparison, sensitivity adjustment, keep/clamp switch, direct threshold value setting, position teaching, -point teaching, automatic teaching, hysteresis width setting, timing inputs, reset input, monitor focus, linear output compensation, (A-B) calculations*, (A+B) calculations*, mutual interference*, laser deterioration detection, zero reset memory, zero reset display, key lock Indications Operation indicators: High (orange), pass (green), low (yellow), 7-segment main display (red), 7-segment subdisplay (yellow), laser ON (green), zero reset (green), enable (green) Power supply voltage to VDC ±%, Ripple (p-p): % max. Current consumption ma max. with power supply voltage of VDC (with Sensor connected) Ambient temperature Operating: to 5 C, Storage: 5 to 6 C (with no icing or condensation) Ambient humidity Operating and storage: 5% to 85% (with no condensation) Insulation resistance MΩ min. at 5 VDC Dielectric strength, VAC, 5/6 Hz for min Vibration resistance to 5 Hz,.7-mm double amplitude 8 min each in, Y, and Z directions (destruction) Shock resistance m/s times each in six directions (up/down, left/right, forward/backward) (destruction) Connection method Prewired (standard cable length: m) Weight (packed state) Approx. 5 g Materials Case: PBT (polybutylene terephthalate), Cover: Polycabonate Accessories Instruction sheet *. The response speed of the linear output is calculated as the measurement period (average count setting + ) (with fixed sensitivity). The response speed of the judgement outputs is calculated as the measurement period (average count setting + ) (with fixed sensitivity). *. The output can be switched between a current output and voltage output using a switch on the bottom of the Amplifier Unit. *. Setting is possible via the monitor focus function. *. A Calculating Unit (Z-CAL) is required. Z Series (Z-L-N) Smart Sensors (Laser Type) 5
6 Calculating Unit Item Applicable Amplifier Units Current consumption Ambient temperature Ambient humidity Connection method Dielectric strength Insulation resistance Vibration resistance (destructive) Shock resistance (destructive) Materials Weight (packed state) Z-CAL Z-LDA-N/-N/Z-EDA//Z-TDA/ ma max. (supplied from the Smart Sensor Amplifier Unit) Operating: to 5 C, Storage: 5 to 6 C (with no icing or condensation) Operating and storage: 5% to 85% (with no condensation), VAC, 5/6 Hz for min MΩ (at 5 VDC) to 5 Hz,.7-mm double amplitude 8 min each in, Y, and Z directions m/s times each in six directions (up/down, left/right, forward/backward) Display: Acrylic, Case: ABS resin Approx. 5 g Z-series Communications Interface Unit Item Z-SF Current consumption 6 ma max. (supplied by the Amplifier Unit) Applicable Amplifier Units Z Series Applicable Amplifier Unit versions Z-LDA@-N Ver.. or higher Z-EDA@ Ver.. or higher Z-TDA@ Ver.. or higher Max. No. of Amplifier Units 5 Communications Communications RS-C port (9-pin D-Sub ) functions port Communications CompoWay/F* protocol Baud rate 8, bps Data configuration Data bits: 8, Parity: none, Start bits:, Stop bits:, Flow control: none Indicators Power supply: green, Sensor communications: green, Sensor communications error: red, External terminal communications: green, External terminal communications error: red Protective circuits Reverse polarity protection Ambient temperature Operating: to 5 C, storage: 5 to 6 C (with no icing or condensation) Ambient humidity Operating and storage: 5% to 85% (with no condensation) Insulation resistance MΩ min. (at 5 VDC) Dielectric strength, VAC, 5/6 Hz for min, Leakage current: ma max. Materials Case: PBT (polybutylene terephthalate), Cover: Polycarbonate Accessories Instruction sheet, clamps * Contact your OMRON representative for CompoWay/F communications specifications. 6 Z Series (Z-L-N) Smart Sensors (Laser Type)
7 Engineering Data (Typical) Angle Characteristic (Reflective Sensors) The angle characteristic plots the relation between the inclination of the measurement object and the error in the linear output at the measurement point. Note: SUS = Stainless steel SUS Z-LD Side-to-side Inclination SUS Z-LD Side-to-side Inclination SUS Z-LD Side-to-side Inclination SUS Black paper Front-to-back Inclination Front-to-back Inclination Front-to-back Inclination SUS SUS 5 5 SUS Z-LDL Side-to-side Inclination Z-LDL Side-to-side Inclination Z-LDL Side-to-side Inclination SUS SUS SUS Front-to-back Inclination SUS Front-to-back Inclination SUS Front-to-back Inclination SUS Z Series (Z-L-N) Smart Sensors (Laser Type) 7
8 Z-LDV Side-to-side Inclination Z-LDVL Side-to-side Inclination Linearity error (%FS) SUS Linearity error (%FS) SUS Front-to-back Inclination Front-to-back Inclination Linearity error (%FS) SUS Linearity error (%FS) SUS Z Series (Z-L-N) Smart Sensors (Laser Type)
9 Linearity Characteristic for Different Materials (Reflective Sensors) Z-LD Inclination Inclination Front-to-back inclination SUS SUS Inclination inclination SUS 6 8 Z-LD Inclination inclination Inclination Front-to-back Inclination inclination SUS inclination SUS inclination SUS SUS 5 inclination Z-LD Inclination Inclination Front-to-back Inclination 5 SUS 5 inclination SUS inclination Z-LDL Inclination Inclination Front-to-back Inclination inclination SUS SUS Black paper inclination SUS inclination Z Series (Z-L-N) Smart Sensors (Laser Type) 9
10 Z-LDL Inclination Inclination Front-to-back Inclination inclination SUS inclination SUS inclination SUS Z-LDL Inclination Inclination Front-to-back Inclination inclination SUS inclination inclination SUS inclination. SUS Z-LDV Inclination Inclination Front-to-back Inclination SUS SUS inclination. SUS inclination Z-LDVL Inclination Inclination Front-to-back Inclination SUS inclination. SUS inclination. SUS inclination Z Series (Z-L-N) Smart Sensors (Laser Type)
11 Beam Size (Reflective Sensors) Spot Beams Spot Beams L L Beam cross-section Y Z-LD L mm mm 5 mm µm. µm 5 µm Y 5 µm. µm 7 µm Z-LD L 6 mm mm mm 9 µm µm µm Y 6 µm 65. µm 65 µm Z-LD L mm mm 5 mm,5 µm 8 µm, µm Y 5 µm µm 85 µm Line Beams L Beam cross-section Y Z-LDV L 8 mm mm mm 6. µm. µm µm Y 5. µm. µm 9. µm Line Beams L Beam cross-section Y Z-LDVL L 8 mm mm mm,8 µm,8 µm,8 µm Y 9. µm 6. µm µm Beam cross-section Y Z-LDL L mm mm 5 mm, µm, µm, µm Y µm 5. µm 5 µm Z-LDL L 6 mm mm mm, µm, µm, µm Y µm µm µm Z-LDL L mm mm 5 mm, µm, µm,5 µm Y 75 µm µm 65 µm Z Series (Z-L-N) Smart Sensors (Laser Type)
12 Sensing Object Characteristics (Through-beam Sensors) Linear (analog) output (%FS) Z-LT (For.-mm-dia. pin gauge) Z-LT (For.5-mm-dia. pin gauge) Z-LT5 (For.5-mm-dia. pin gauge) WD=5 mm WD=5 mm.5 WD=5 mm Sensing distance: 5 mm Sensing object:.5-mm dia WD=5 mm 8 WD= mm WD=5 mm WD=5 mm WD=5 mm WD=, mm Sensing distance: 5 mm WD=,5 mm Sensing object:.-mm dia..5 WD=,8 mm distance: m Sensing Pin gauge Sensing object:.5-mm dia. Y Pin gauge Y Pin gauge Y Emitter side WD Receiver side 8 Emitter WD side Receiver side Emitter side WD Receiver side Light axis center Light axis center Light axis center Detection position Y (mm) Detection position Y (mm) Detection position Y (mm) Linear (analog) output (%FS) Linear output (%FS) Z-LT (For.-mm-dia. pin gauge).5 WD = 5 mm WD = 5 mm WD = 5 mm Sensing distance: 5 mm Sensing object:.-mm dia. Linear output (%FS) Pin gauge Y Emitter side Receiver WD side 8 8 Light axis center Detection position Y (mm) Linearity Characteristics Linear output error rate (%FS) Z-LT5 WD=5 mm WD=5 mm WD=5 mm Sensing distance: 5 mm Emitter side Receiver side WD 5 Light interruption (mm) Linear output error rate (%FS) Z-LT WD = 5 mm WD = 5 mm WD = 5 mm Sensing distance: 5 mm Emitter side Receiver side WD 5 Light interruption (mm) Z Series (Z-L-N) Smart Sensors (Laser Type)
13 Linear Output vs. Sensing Distance The output can be switched between a current output and a voltage output using a switch on the Amplifier Unit. Z-LD/LDL Current Output Voltage Output Linear output (ma) Linear output (V) Z-LD/LDL Current Output Linear output (ma) Z-LD/LDL Current Output Linear output (ma) Voltage Output Linear output (V) Voltage Output Linear output (V) Z-LDV/LDVL Current Output Measurement range ( mm) 6 Linear output (ma) Voltage Output Measurement range ( mm) 6 Linear output (V) Z Series (Z-L-N) Smart Sensors (Laser Type)
14 I/O Circuit Diagrams NPN Amplifier Unit: Z-LDA-N PNP Amplifier Unit: Z-LDA-N Brown: to VDC Brown: to VDC White: HIGH output Load Green: PASS output Gray: LOW output Load Load to VDC White: HIGH output Green: PASS output Gray: LOW output Load to VDC Blue: GND (V) Pink: Laser OFF input Blue: GND (V) Load Load Internal circuits Purple: Timing input Orange: Zero reset input Red: Reset input Internal circuits Pink: Laser OFF input Purple: Timing input Orange: Zero reset input Red: Reset input Current/voltage switch Ω Current output to ma Voltage output ±V Black: Linear output Shield: Linear GND Load Current output: Ω max. Voltage output: kω min. Current/voltage switch Ω Current output to ma Voltage output ±V Black: Linear output Shield: Linear GND Load Current output: Ω max. Voltage output: kω min. Connections: Amplifier Unit Brown: to VDC Blue: GND (V) White: Green: HIGH output PASS output Gray: LOW output Black: Linear output Shield: Linear output GND Pink: Laser OFF input Orange: Zero reset input Purple: Timing input Red: Reset input Note. Use a separate stabilized power supply for the Amplifier Unit, particularly when high resolution is required.. Wire the Unit correctly. Incorrect wiring may result in damage to the Unit. (Do not allow wiring, particularly the linear output, to come into contact with other lines.). Use the -V line (blue) for the power supply and use the shield wire (linear output ground) together with the linear output (black line) for linear output. Each of these grounds must be used for the designed purpose. When not using the linear output, connect the linear ground (shield) to the -V ground. Z Series (Z-L-N) Smart Sensors (Laser Type)
15 Part Names Sensor Heads (Reflective) Z-LD Z-LD Z-LD Z-LDL Z-LDL Z-LDL Z-LDV* Z-LDVL* Receiver (Optical filter) Output cable (with connector) Amplifier Units Z-LDA-N Z-LDA-N Display area Display area Input cable (with connector) Controls Output cable (Cover opens and closes.) *The dimensions for these models are slightly different. Refer to page for details. Sensor Heads (Through-beam) Z-LT Z-LT5 Z-LT Z-LT Emitter Laser ON indicator (green) Lit when light is emitted. Emitter side sensor head connector Receiver side sensor head connector Emitter Light emitter Receiver side (Optical filter) Calculating Unit Z-CAL Display area Receiver Z Series (Z-L-N) Smart Sensors (Laser Type) 5
16 Precautions Design Precautions Ratings and Performance Conform to the specified ratings and performance. Refer to Specifications for details.. Do not impose voltage exceeding the rated voltage, otherwise the Sensor may be damaged.. When supplying power to the Sensor, make sure that the polarity of the power is correct, otherwise, the Sensor may be damaged. Do not connect to an AC power supply.. Do not short-circuit the load for the open collector output, otherwise the Sensor may be damaged. Do not disconnect the connector connecting the Sensor Head and the controller while power is being supplied, otherwise the Sensor may be damaged. Allow a warm-up period of approximately minutes after turning ON the power supply. Objects of certain materials or shapes may not be detectable, or the detection accuracy may not be sufficiently high. These include materials that are transparent or have extremely low reflectivity, and objects that are smaller than the Sensor s spot diameter or have extreme curvature or inclination. Other Precautions Environment. Do not use the Sensor in strong electromagnetic fields or in an environment where the operation of the Sensor is subject to the reflection of intense light (such as other laser beams or electric arc-welding machines.). Do not operate the Sensor in the following locations: Locations subject to strong vibration. Locations subject to direct sunlight or near heating equipment. Locations subject to high humidity. Locations where the Sensor would accumulate dust, dirt, metallic powder, etc. Locations subject to corrosive or flammable gases. Locations subject to exposure to organic solvents, water, oil, etc. Locations subject to strong electromagnetic or electrical fields. Locations subject to rapid changes in temperature. Locations subject to freezing. Power Supply and Wiring Prior to turning ON the power supply after wiring is completed, check to make sure that the power supply is correct, that there are no mistaken connections, e.g., connections that would short-circuit the load, and that the load current is appropriate. Incorrect wiring may result in damage to the Sensor or Unit. The total length of the Sensor cable or Amplifier cable must be m or less. Use an Z-C@A Extension Cable (order separately) if required to extend the cable from the Sensor. Use a shielded cable to extend the Amplifier cable. The shielded cable must be the same as that of the Amplifier cable. Do not lay a power supply cable for the Z together with high-voltage lines or power lines to prevent interference, damage, and malfunction. When using a commercially available switching regulator, ground the FG (frame ground) terminal. If the power supply line is subject to surges, connect a surge absorber that meets the conditions of the usage environment. When using a Calculating Unit, connect the corresponding linear ground of the Amplifier Unit. Compatibility All Sensor Heads and Amplifier Units are compatible. Different Sensor Heads may be purchased at a later date and used with existing Amplifier Units. Mutual Interference Two Sensor Heads can be used together, without danger of mutual interference, by connecting the Z-CAL Calculating Unit between two Amplifier Units. Maintenance Always turn OFF the power supply before adjusting or removing the Sensor Head. Cleaning Do not use thinners, benzine, acetone, or kerosene for cleaning. If dust or oil adheres to the filter on the front of the Sensor Head, use the following procedure to clean.. Use a blower brush (used to clean camera lenses) to blow large dust particles from the surface. Do not blow the dust away with your mouth.. Use a soft cloth (for lenses) with a small amount of alcohol to remove the remaining dust. Do not use a scrubbing action when cleaning because scratches on the filter could result in Sensor inaccuracy. 6 Z Series (Z-L-N) Smart Sensors (Laser Type)
17 Laser Safety The Z-LD-Series Sensor Heads are FDA Class II and EN Class Laser Products. The Z-LT-Series Sensor Heads are FDA Class II and EN Class Laser Products. The Z Series is meant to be built into final system equipment. Pay special attention to the following precautions for the safe use of the product: Note: Europe: Class and Class of EN685-: 99 = IEC85-: 99 U.S.A.: Class I and Class II of FDA ( CFR.). Use this product as specified in this instruction manual. Otherwise, you may be exposed to hazardous laser radiation.. The Z-series Smart Sensors radiate laser beams in the visible light range. Do not expose your eyes directly to the laser radiation. Ensure that the laser beam path is terminated during use. If a mirror or shiny surface is positioned in the laser beam path, ensure that the reflected beam path is also terminated. If the Unit must be used without terminating the laser beam path, position the laser beam path so that it is not at eye level.. To avoid exposure to hazardous laser radiation, do not displace nor remove the protective housing during operation, maintenance, and any other servicing.. The user should return the product to OMRON for all repair and servicing. 5. As for other countries, observe the regulations and standards specified by each country. Requirements from Regulations and Standards EN685- Safety of Laser Products, Equipment Classification, Requirements and User s Guide Summary of Manufacturer s Requirements Requirements; Sub-clause Description of hazard class Protective housing Safety interlock in protective housing Classification Class Class Class A Class B* Class Safe under reasonably foreseeable conditions Low power; eye protection normally afforded by aversion responses Same as Class. Direct intrabeam viewing with optical aids may be hazardous Direct intrabeam viewing may be hazardous High power; diffused reflection may be hazardous Required for each laser product; limits access necessary for performance of functions of the products Designed to prevent removal of the panel until accessible emission values are below the AEL (see note ) for the class assigned Remote control Not required Permits easy addition of external interlock in laser installation Key control Not required Laser inoperative when key is removed Emission warning device Not required Gives audible or visible warning when laser is switched on or if capacitor bank of pulsed laser is being charged Attenuator Not required Gives means beside ON/OFF switch to temporarily block beam Location controls Not required Controls so located that there is no danger of exposure to AEL above Classes or when adjustments are made. Viewing optics Emission from all viewing systems must be below Class AEL s as applicable Scanning Scan failure shall not cause product to exceed its classification Class label Required wording Figures A and B and specified wording Aperture label Not required Specified wording required Service entry label Required as appropriate to the class of accessible radiation Override interlock label Required under certain conditions as appropriate to the class of laser used User information Operation manuals must contain instructions for safe use Purchasing and service Promotion brochures must reproduce classification labels; service manuals must contain safety information information Medical products Special calibration instructions required Special calibration instructions, means for measurement and target-indicator required Fibre optic Cable service connections require tool to disconnect if disconnection breaks protective housing and permits access above Class *With respect to the requirements of remote interlock connector, key control, emission warning and attenuator, Class B laser products not exceeding five times the AEL of Class in the wavelength range of nm to 7 nm are to be treated as Class A laser products. Note. This table is intended to provide a convenient summary of requirements. See text of this standard for complete requirements. Z Series (Z-L-N) Smart Sensors (Laser Type) 7
18 . AEL: Accessible Emission Limit The maximum accessible emission level permitted within a particular class. For your reference, see ANSI Z6.-99, Section. Symbol and border: black Background: yellow Figure A Warning label - Hazard symbol Legend and border: black Background: yellow Figure B Explanatory label 8 Z Series (Z-L-N) Smart Sensors (Laser Type)
19 FDA (Compliance Guide for Laser Products, 985, according to CFR.) Requirements Class (see note ) I IIa II IIIa IIIb IV Performance (all laser products) Protective housing R (see note ) R (see note ) R (see note ) R (see note ) R (see note ) R (see note ) Safety interlock R (see notes, ) R (see notes, ) R (see notes, ) R (see notes, ) R (see notes, ) R (see notes, ) Location of controls N/A R R R R Viewing optics R R R R R R Scanning safeguard R R R R R R Performance (laser systems) Remote control connector N/A N/A N/A N/A R R Key control N/A N/A N/A N/A R R Emission indicator N/A N/A R R R (see note ) R (see note ) Beam attenuator N/A N/A R R R R Reset N/A N/A N/A N/A N/A R (see note ) Performance (specific purpose products) Medical S S S S (see note 8) Surveying, leveling, alignment S (see note 8) S S S S NP NP S (see note 8) Demonstration S S S S S (see note ) S (see note ) Labeling (all laser products) Certification & identification R R R R R R Protective housing D (see note 5) D (see note 5) D (see note 5) D (see note 5) D (see note 5) Aperture N/A N/A R R R R Class warning N/A R (see note 6) Information (all laser products) R (see note 7) R (see note 9) R (see note ) User information R R R R R R Product literature N/A R R R R R Service information R R R R R R D (see note 5) R (see note ) Abbreviations: R: Required. N/A: Not applicable. S: Requirements: Same as for other products of that Class. Also see footnotes. NP: Not permitted. D: Depends on level of interior radiation. Footnotes:. Based on highest level accessible during operation.. Required wherever & whenever human access to laser radiation above Class I limits is not needed for product to perform its function.. Required for protective housings opened during operation or maintenance, if human access thus gained is not always necessary when housing is open.. Interlock requirements vary according to Class of internal radiation. 5. Wording depends on level & wavelength of laser radiation within protective housing. 6. Warning statement label. 7. CAUTION logotype. 8. Requires means to measure level of laser radiation intended to irradiate the body. 9. CAUTION if.5 mw cm or less, DANGER if greater than.5 mw cm..delay required between indication & emission..variance required for Class IIb or iv demonstration laser products and light shows..danger logotype..required after August, 986. Z Series (Z-L-N) Smart Sensors (Laser Type) 9
20 Use Precautions EN685- Requirements; Subclause Classification Class Class Class A Class B* Class Remote interlock Not required Connect to room or door circuits Key control Not required Remove key when not in use Beam attenuator Not required When in use prevents inadvertent exposure Emission indicator device Not required Indicates laser is energized Warning signs Not required Follow precautions on warning signs Beam path Not required Terminate beam at end of useful length Specular reflection No requirements Prevent unintentional reflections Eye protection No requirements Required if engineering and administrative procedures not practicable and MPE exceeded Protective clothing No requirements Sometimes required Specific requirements Training No requirements Required for all operator and maintenance personnel *With respect to the requirements of remote interlock connector, key control, beam attenuator, and emission indicator, Class B laser products not exceeding five times the AEL of Class in the wavelength range of nm to 7 nm are to be treated as Class A laser products. Note: This table is intended to provide a convenient summary of requirements. See text of this standard for complete precautions. ANSI Z6.:99 American National Standard for the Safe Use of Lasers Control Measures for the Four Laser Classes Control measures Classification Engineering Controls a a b Protective Housing (..) Without Protective Housing (...) LSO (see note ) shall establish Alternate Controls Interlocks on Protective Housing (..) Service Access Panel (..) Key Control (..) Viewing Portals (..5.) MPE MPE MPE MPE Collecting Optics (..5.) MPE MPE MPE MPE MPE MPE Totally Open Beam Path (..6.) Limited Open Beam Path (..6.) Enclosed Beam Path (..6.) None is required if.. and.. fulfilled Remote Interlock (..7) Beam Stop or Attenuator (..8) Activation Warning Systems (..9) Emission Delay (..9.) Indoor Laser Controlled Area (..) Class b Laser Controlled Area (...) Class Laser Controlled Area (...) Laser Outdoor Controls (..) Laser in Navigable Airspace (...) Temporary Laser Controlled Area (..) MPE MPE MPE MPE Remote Firing & Monitoring (..) Labels (.. and.7) Area Posting (..5) Administrative & Procedural Controls a a b Standard Operating Procedures (..) Output Emission Limitations (..) LSO Determination Education and Training (..) Authorized Personnel (..) Alignment Procedures (..5) Z Series (Z-L-N) Smart Sensors (Laser Type)
21 Control measures Classification Protective Equipment (..6) Spectator (..7) Service Personnel (..8) MPE MPE MPE MPE Demonstration with General Public (.5.) MPE --- Laser Optical Fiber Systems (.5.) MPE MPE MPE MPE Laser Robotic Installations (.5.) Eye Protection (.6.) MPE Protective Windows (.6.) Protective Barriers and Curtains (.6.) Skin Protection (.6.5) MPE Other Protective Equipment (.6.5) Use may be required Warning Signs and Labels (.7) (Design Requirements) Service and Repairs (.8) LSO Determination Modification of Laser Systems (.9) LSO Determination Note. LEGEND : Shall : Should ---: No requirement : Shall if enclosed Class b or Class MPE: Shall if MPE is exceeded : Nominal Hazard Zone analysis required : Applicable only to UV and IR Lasers (.5..). LSO: Laser Safety Officer An individual shall be designated the Laser Safety Officer with the authority and responsibility to monitor and enforce the control of laser hazards, and to effect the knowledgeable evaluation and control of laser hazards. For your reference, see ANSI Z6.-99, Section.. Laser Product Classifications EN MPE MPE Class Class Class Class A Class B Class Description Lasers which are safe under reasonably foreseeable conditions of operation. Lasers emitting visible radiation in the wavelength range from nm to 7 nm. Eye protection is normally afforded by aversion responses including the blink reflex. Lasers which are safe for viewing with the unaided eye. For laser emitting in the wavelength range from nm to 7 nm, protection is afforded by aversion responses including the blink reflex. For other wavelengths the hazard to the unaided eye is no greater than for Class. Direct intrabeam viewing of Class A lasers with optical aides (e.g., binoculars, telescopes, microscopes) may be hazardous. Direct intrabeam viewing of these lasers is always hazardous. Viewing diffuse reflections is normally safe (see note). Lasers which are also capable of producing hazardous diffuse reflections. They may cause skin injuries and could also constitute a fire hazard. Their use requires extreme caution. Note: Conditions for safe viewing of diffuse reflections for Class B visible lasers are: minimum viewing distance of cm between screen and cornea and a maximum viewing time of s. Other viewing conditions require a comparison of the diffuse reflection exposure with the MPE. Z Series (Z-L-N) Smart Sensors (Laser Type)
22 Comparison of Classifications between FDA and ANSI Label Indications EN Class FDA definition ANSI description Class I/ Class IIa/a Class II/ Class IIIa/a Class IIIb/b Class IV/ Limits applicable to devices that have emissions in the ultraviolet, visible, and infrared spectra, and limits below which biological hazards have not been established. Limits applicable to products whose visible emission does not exceed Class I limits for emission durations of, seconds or less and are not intended for viewing. Limits applicable to products that have emissions in the visible spectrum ( to 7 nm) for emission durations in excess of.5 second, providing that emissions for other durations and/or wavelengths do not exceed the Class I limits. Class II products are considered hazardous for direct long-term ocular exposure. Limits to products that have emissions in the visible spectrum and that have beams where the total collectable radiant power does not exceed 5 milliwatts. Limits applicable to devices that emit in the ultraviolet, visible, and infrared spectra. Class IIIb products include laser systems ranging from 5 to 5 milliwatts in the visible spectrum. Class IIIb emission levels are ocular hazards for direct exposure throughout the range of the Class, and skin hazards at the higher levels of the Class. Exceeding the limits of Class IIIb and are a hazard for scattered reflection as well as for direct exposure. A Class laser is considered to be incapable of producing damaging radiation levels during operation and maintenance and is, therefore, exempt from any control measures or other forms of surveillance. Class lasers are divided into two subclasses, and a. A Class laser emits in the visible portion of the spectrum (. to.7 µm) and eye protection is normally afforded by the aversion response including the blink reflex. Class lasers are divided into two subclasses, a and b. A Class laser may be hazardous under direct and specular reflection viewing conditions, but the diffuse reflection is usually not a hazard. A Class laser is a hazard to the eye or skin from the direct beam and sometimes from a diffuse reflection and also can be a fire hazard. Class lasers may also produce laser-generated air contaminants and hazardous plasma radiation. Laser warning label EN/IEC warning label Explanatory label with specified wording Note: Use of controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure. FDA Caution logo type Certification and identification label Aperture Label Class II Caution logo type Aperture label Certification and Identification Label Note: Use of controls, adjustments, or procedures other than those specified herein may result in hazardous radiation exposure. Z Series (Z-L-N) Smart Sensors (Laser Type)
23 Dimensions Sensor Heads (Diffuse Reflective) Z-LD Z-LD Z-LD Z-LDL Z-LDL Z-LDL L Measurement point Reference surface A Emitter axis Lens: 5 dia. Receiver axis Lens: 8 dia Two.-dia. mounting holes Range indicators.8. Mounting Holes Two, M holes ±. 6±. (Unit: mm) 5 dia. 6 Z-LDL: L = mm, A = Z-LDL: L = mm, A = Z-LDL: L = mm, A =.8 Vinyl-insulated round cable, 5. dia., Standard: 5 mm Sensor Heads (Regular Reflective) Z-LDV Z-LDVL Vinyl-insulated round cable, 5. dia., Standard:.5 m.7 5-R Mounting Holes Two, M holes Light axis.5 Two,.5-dia. mounting holes Reference plain Receiver axis Emitter axis 5 dia. 7±. Measurement center Lens (6 dia.) Lens ( dia.) Z Series (Z-L-N) Smart Sensors (Laser Type)
24 Sensor Heads (Through-beam) Z-LT Z-LT5 Vinyl-insulated round cable (gray),.6 dia., Standard: 5 mm.8 Two,. dia. Emitter side 6 Receiver side Two,. dia Vinyl-insulated round cable (black),.6 dia., Standard: 5 mm Laser ON indicator Light axis center Light axis center 5 5 Mounting Holes 9±. 9±. Two, M holes Two, M holes Mounting Holes 5 dia. Sensor Head-Amplifier Unit Connecting Cable (Provided),5 + Vinyl-insulated round cable (gray),.5 dia, -conductor 6 Vinyl-insulated round cable (black),.5 dia, -conductor.6 dia Z-LT Vinyl-insulated round cable (gray),.6 dia., Standard: 5 mm Emitter side Two,. dia..8 Receiver side Two,. dia. 5.8 Vinyl-insulated round cable (black),.6 dia., Standard: 5 mm Laser ON indicator Light axis center Light axis center Sensor Head-Amplifier Unit Connecting Cable (Provided) Mounting Holes Mounting Holes,5 + Vinyl-insulated round cable (gray),.5 dia, -conductor 6 ±. ±. Two, M holes Two, M holes 5 dia. Vinyl-insulated round cable (black),.5 dia, -conductor.6 dia Z-LT Emitter Receiver Two,.5 dia Two,.5 dia Vinyl insulated round cable, dia., Standard length:.5 m 68 Three, M x 5 + pan head screw 5 Three, M x 5 + pan head screw Vinyl insulated round cable, dia., Standard length:.5 m Two, M, 5 depth: dia Lens (8 x 6) Two, M. Slit ( x ) 5 Two, M Two, M, depth: dia. Z Series (Z-L-N) Smart Sensors (Laser Type)
25 Sensor Head - Amplifier Connection Cable 5. dia dia.. dia. Amplifier Units Z-LDA-N Z-LDA-N dia Vinyl-insulated round cable, 5. dia. Standard: mm 6.8 Vinyl-insulated round cable, 5. dia. (conductor cross-section:.9 mm, -conductor insulator diameter:.7 mm), Standard: m Current/voltage output selector switch (set to voltage output when shipped) Voltage output Z Series (Z-L-N) Smart Sensors (Laser Type) 5
26 Accessories (Order Separately) Calculating Unit Z-CAL Operation indicators s Side-view Attachments Z-F 5 Two,. dia. Light axis center Z-F Two,. dia. Light axis center Seal.8 6 Z Series (Z-L-N) Smart Sensors (Laser Type)
27 Z-series Communications Interface Unit Z-SF Sensor communications indicator (communications operation) Sensor communications indicator (communications error) Coupling connector Power supply indicator External terminal communications indicator (communications operation) External terminal communications indicator (communications error) (6) (6) Vinyl-insulated round cable, 5. dia. Standard: mm.7 (.) Cables with s on Both Ends (for Extension) Z-CA ( m) Z-CA ( m) 5 dia. Z-C8A (8 m) Z-C9A (9 m) 6 pins (male) Vinyl-insulated round cable, 5. dia., conductors pins (female) Z-CA:, Z-CA:, Z-C8A: 8, Z-C9A: 9, 5.5 dia. Z Series (Z-L-N) Smart Sensors (Laser Type) 7
28 Terms and Conditions of Sale. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all quotes, agreements, purchase orders, acknowledgments, price lists, catalogs, manuals, brochures and other documents, whether electronic or in writing, relating to the sale of products or services (collectively, the "Products") by Omron Electronics LLC and its subsidiary companies ( Omron ). Omron objects to any terms or conditions proposed in Buyer s purchase order or other documents which are inconsistent with, or in addition to, these Terms.. Prices; Payment Terms. All prices stated are current, subject to change without notice by Omron. Omron reserves the right to increase or decrease prices on any unshipped portions of outstanding orders. Payments for Products are due net days unless otherwise stated in the invoice.. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Omron s payment terms and (ii) Buyer has no past due amounts.. Interest. Omron, at its option, may charge Buyer -/% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 5. Orders. Omron will accept no order less than $ net billing. 6. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Products. 7. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Omron or required to be collected directly or indirectly by Omron for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Omron. 8. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Omron, Omron reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Omron may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Omron against all related costs or expenses.. Force Majeure. Omron shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority.. Shipping; Delivery. Unless otherwise expressly agreed in writing by Omron: a. Shipments shall be by a carrier selected by Omron; Omron will not drop ship except in break down situations. b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Products shall be FOB shipping point (unless otherwise stated in writing by Omron), at which point title and risk of loss shall pass from Omron to Buyer; provided that Omron shall retain a security interest in the Products until the full purchase price is paid; d. Delivery and shipping dates are estimates only; and e. Omron will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions.. Claims. Any claim by Buyer against Omron for shortage or damage to the Products occurring before delivery to the carrier must be presented in writing to Omron within days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Products from Omron in the condition claimed.. Warranties. (a) Exclusive Warranty. Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL- ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron s sole obligation hereunder shall be, at Omron s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See or contact your Omron representative for published information.. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. 5. Indemnities. Buyer shall indemnify and hold harmless Omron Companies and their employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Omron is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Omron and defend or settle any action brought against such Companies to the extent based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 6. Property; Confidentiality. Any intellectual property in the Products is the exclusive property of Omron Companies and Buyer shall not attempt to duplicate it in any way without the written permission of Omron. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Omron. All information and materials supplied by Omron to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 7. Export Controls. Buyer shall comply with all applicable laws, regulations and licenses regarding (i) export of products or information; (iii) sale of products to forbidden or other proscribed persons; and (ii) disclosure to non-citizens of regulated technology or information. 8. Miscellaneous. (a) Waiver. No failure or delay by Omron in exercising any right and no course of dealing between Buyer and Omron shall operate as a waiver of rights by Omron. (b) Assignment. Buyer may not assign its rights hereunder without Omron's written consent. (c) Law. These Terms are governed by the law of the jurisdiction of the home office of the Omron company from which Buyer is purchasing the Products (without regard to conflict of law principles). (d) Amendment. These Terms constitute the entire agreement between Buyer and Omron relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. (e) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (f) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (g) Definitions. As used herein, including means including without limitation ; and Omron Companies (or similar words) mean Omron Corporation and any direct or indirect subsidiary or affiliate thereof. Certain Precautions on Specifications and Use. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer s application or use of the Product. At Buyer s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application, product or system. Buyer shall take application responsibility in all cases but the following is a non-exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in significant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON S PRODUCT IS PROP- ERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.. Programmable Products. Omron Companies shall not be responsible for the user s programming of a programmable Product, or any consequence thereof.. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron s Warranty and Limitations of Liability.. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions.
29 Cat. No. E9-E- /5 Specifications subject to change without notice Printed in USA
Optical system Beam shape Sensing distance Resolution*1 Model Diffuse reflective Spot beam 40±10 mm 2 µm ZX-LD40. Line beam 40±10 mm 2 µm ZX-LD40L
Smart Sensors (Laser Type) Z Series (Z-L-N). Ordering Information Sensors Sensor Heads (Reflective) Optical system Beam shape Sensing distance Resolution* Model Diffuse reflective Spot beam ± mm µm Z-LD
More informationAppearance and sensing characteristic Specification (temperature range) Model 10 to 70 C ES1B. 2 mm 20 mm 40 mm 60 mm. 40 dia. 60 dia.
Infrared Thermosensor CSM DS_E_3_2 Achieve Low-cost Measurements with an Infrared Thermosensor. The has an electromotive output as high as that of a thermocouple, thus connecting directly to the thermocouple
More informationUltrasonic Reflective Sensor
Ultrasonic Reflective with an Adjustable Sensing Distance of 0.3 to 3 m Under Stable Operation without Background Interference Ensures a stable operating range with minimal side-lobe areas. Built-in unstable
More informationE2K-L. Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid. Liquid Level Sensor. Ordering Information
Liquid Level Sensor EK-L CSM_EK-L_DS_E_4_ Liquid Level Sensor That Is Unaffected by the Color of the Pipe or Liquid Mount to bypass pipes. Fit a wide range of pipe diameters: 8 to 11 mm or 1 to mm Built-in
More informationonlinecomponents.com
Reflective Mapping CSM DS_E_2_1 Ideal for Mapping Liquid Crystal Glass Plates on Cassette Trays Be sure to read Safety Precautions on page 3. Features Detects glass plates without being influenced by the
More informationES2-HB. Ordering Information. Dimensions. Specifications. Humidity Sensor Temperature/Humidity Sensor
Humidity Sensor Temperature/Humidity Sensor ES2-THB CSM ES2-THB_DS_E_3_2 Detect Humidity within an Accuracy of ±3% in a Compact Body. Set Provides Superior Humidity Control and Temperature/ Humidity Control.
More informationUltrasonic Reflective Sensor
Ultrasonic Reflective with an Adjustable Sensing Distance of 0.3 to 3 m Under Stable Operation without Background Interference Ensures a stable operating range with minimal side-lobe areas. Built-in unstable
More informationClass 1 laser beam sensor safe for your eyes
113 Sensor SERIES Related Information General terms and conditions... F-7 About laser beam... P.199~ Sensor selection guide... P.1~ General precautions... P.11 PHOTO PHOTO PARTICUR MEASURE ITY panasonic.net/id/pidsx/global
More informationClass 1 laser beam sensor safe for your eyes
13 Sensor SERIES Related Information General terms and conditions... F-17 About laser beam... P.13~ Sensor selection guide... P.967~ General precautions... P.1 PHOTO PHOTO Conforming to EMC Directive Conforming
More informationE3M-V. Mark Sensor. Applications
Mark Sensor Detects laminated or light-dispersing objects in stable operation without being influenced by mirror reflection. Double indication of the detection level and threshold level allows easy grasp
More informationUltrasonic Proximity Sensor
Ultrasonic Proximity Sensor Compact, Cylindrical Ultrasonic Proximity Sensor with Separate Amplifier Unit Stable operation for a variety of objects regardless of color, transparency, or material (metallic
More informationColor Mark Sensor. Sensing gdsa distance Spot diameter e. Possible to switch between vertical or horizontal connection using the M12 rotary connector.
Color Mark Sensor Detects laminated or light-dispersing objects in stable operation without being influenced by mirror reflection. Double indication of the detection level and threshold level allows easy
More informationModel Number Structure
Element Burnout Detector Accurate Detection of Element Burnout Regardless of Capacities Accurately detects a burned heater element or elements incorporated by a molding machine or packing machine and outputs
More informationClass 1 laser beam sensor safe for your eyes
1129 PHOTO PHOTO PARTICUR Sensor SERIES Related Information General terms and conditions... F-3 About laser beam... P.193~ guide... P.121~ General precautions... P.19 Conforming to FDA regulations (-11
More information10 to 30 VDC Diffuse 40 mm ±10 mm NPN and PNP, switch-selectable
R Label Detection Sensor E3S-CD68/63 Detect Labels Regardless of Label Color or Luster, Bottle Color or Clarity H High-performance circuitry detects wide variety of labels on clear and colored bottles
More informationES2-HB-N. Ordering Information. Specifications. Temperature/Humidity Sensor ES2-THB-N. Humidity Sensor
Humidity Sensor Temperature/Humidity Sensor ES2-THB-N Detect Humidity within an Accuracy of ±3% in a Compact Body. Set Provides Superior Humidity Control and Temperature/ Humidity Control. Employs high-polymer-resistive
More informationD6T. Contactless measurement creating energy-efficient and comfortable living spaces. MEMS Thermal Sensors
MEMS Thermal Sensors D6T Contactless measurement creating energy-efficient and comfortable living spaces Application examples provided in this document are for reference only. In actual applications, confirm
More informationLaser Use at Subaru Telescope (NAOJ) Laser Safety Policy
Laser Use at Subaru Telescope (NAOJ) Laser Safety Policy 1. Introduction This program applies to all lasers and laser systems operated by Subaru Telescope. This program maintains compliance with ANSI Z136.1-2007
More informationScale 0: 10 k Scale 50: 10 k (see note 2)
Water Leak Alarm/Detector Eliminate Problems Caused from Water Leakage 0 to 50 k variable operating resistance to detect virtually any liquid. Two types available: Water Leak Alarm (61F-WLA) and plug-in
More informationpre-wired E3FA-TP11-F2 2M E3FB-TP11-F2 2M
PHOTOELECTRIC SENSORS EFA/B_-F Special family with inverted output logic Fully compatible with previous EF family Simple installation due to compact format Wide variety of models Ordering Information EFA/B
More informationMX1A and MX1B: Laser Displacement Detection Sensors. 85% to 110% of the rated voltage MX1A: 15VA, MX1B: 25VA
MX1A and MX1B: Laser Displacement Detection MX1A and MX1B: Laser Displacement Detection Built-in math capabilities available (MX1B only) Digital display on amplifier; easy setting and monitoring (MX1B
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60825-1 1993 AMENDMENT 2 2001-01 PUBLICATION GROUPÉE DE SÉCURITÉ GROUP SAFETY PUBLICATION Amendment 2 Safety of laser products Part 1: Equipment classification, requirements
More informationTransparent Object (PET Bottle) Detection Compact Photoelectric Sensor
Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor CSM DS_E_4_7 Excellent PET Bottle Detection New detection method that is independent of bottle shape, position, and contents. Automatic
More informationImportant Safety Notice
Date: 27 th April 2015 Page 1 of 12 SPI Lasers UK Limited Safety Information High Power OEM Fibre Lasers Important Safety Notice This notice outlines important safety related information and must be read
More informationScanning Laser Range Finder Smart-URG mini UST-10LN Specification
Date: 2016.3.24 Scanning Laser Range Finder Smart-URG mini UST-10LN Specification Symbol Amended Reason Pages Date Corrector Amendment No Approved by Checked by Drawn by Designed by UST-10LN Specification
More informationTransparent Object (PET Bottle) Detection Compact Photoelectric Sensor
Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor CSM DS_E_4_4 Excellent PET Bottle Detection New detection method that is independent of bottle shape, position, and contents. Automatic
More informationE3FA/E3RA/E3FB/E3RB. Application specific models. Limited-reflective types suitable for detecting transparant film to shiny, mirror film.
PHOTOELECTRIC SENSORS EFA/ERA/EFB/ERB A new generation in sensing performance Simplicity Simple selection Simple installation One family for all All standard applications covered A wide variety of models
More informationNorth Dakota State University Laser Safety
North Dakota State University Laser Safety I. Introduction The laser represents a class of light emitting devices with unique characteristics. Some of these characteristics can result in significant hazards.
More informationLASER SAFETY. Class 2 and 2a - low power, low risk Class 2 and 2a lasers have low power and emit visible light. They will cause harm if viewed
LASER SAFETY Laser is an acronym for light amplification by stimulated emission of radiation. Radiation in this case occurs in the portions of the electromagnetic field with insufficient energy to induce
More informationTitle: Laser Safety Effective Date: 9/91 Revision: 2/97 Number of Pages: 7
Environmental Health and Safety Manual Policy Number: EH&S 6-8 Title: Laser Safety Effective Date: 9/91 Revision: 2/97 Number of Pages: 7 PURPOSE: SCOPE: To protect University employees against health
More informationLaser Collimated Beam Sensor
SERIES Laser Collimated Beam Sensor Class 1 Laser Beam Sensor Safe for Your Eyes Marked Conforming to EMC Directive (Excluding LA-C1) Safe Laser Beam This laser collimated beam sensor conforms to the Class
More informationLaser Safety Part III Administration
Laser Safety Part III Administration Environmental Health and Research Safety October 24, 2016 Part III Overview Regulatory Framework Laser Safety Program Control Measures Non-beam Hazard Precautions Emergency
More informationOriginal instructions Sense7-series Non-contact coded safety switch
Original instructions Sense7-series Non-contact coded safety switch ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/lowvoltage Read and understand this document Please
More informationLaser Safety Citations
General 1. Lasers are classified appropriately Classify lasers and laser systems according to their relative hazards MSU Laser Safety Manual - Laser Classification, pg 9 2. Beam attenuator present A beam
More informationOCCUPATIONAL SAFETY AND ENVIRONMENTAL HEALTH GUIDELINE
OCCUPATIONAL SAFETY AND ENVIRONMENTAL HEALTH GUIDELINE Subject: Laser Safety Date: 9/24/12 Revision: 04 Page: 1 of 16 SUMMARY: Laser use at the University of Michigan (U-M) encompasses many disciplines
More informationLaser Safety Part III Administration
Laser Safety Part III Administration Environmental Health and Research Safety October 12, 2017 Part III Overview Regulatory Framework Laser Safety Program Control Measures Non-beam Hazard Precautions Emergency
More informationSeries: MBC1-TC Mini Benchtop Temperature Controller
User s Guide Series: MBC1-TC Mini Benchtop Temperature Controller Imagine Instruments LLC:: 4500 Williams Drive, Ste 212-318 :: Georgetown, TX 78633 :: p. 855.574.6243 e-mail: info@imagineinstruments.com
More informationE3FA PHOTOELECTRIC SENSORS
Authorised Distributors:Intech Systems Chennai Pvt. Ltd, Chennai-6 2 Ph: +91 44 45 8888 Fax: 44 45 888 E-mail: info@intechchennai.com Website: www.intechchennai.com EFA PHOTOELECTRIC SENSORS A new generation
More informationStony Brook University Hospital Environmental Health & Safety Policy & Procedure Manual. EH&S 6-8 Original : 1/00 Revision Date: 3/16/15 Pages 6
Title: Laser Safety Stony Brook University Hospital Environmental Health & Safety Policy & Procedure Manual EH&S 6-8 Original : 1/00 Revision Date: 3/16/15 Pages 6 PURPOSE: SCOPE: To protect University
More informationADT Security Website Terms of Use
ADT Security Website Terms of Use Last revised: August 30, 2012 These ADT Website Terms and Conditions of Use (the "Terms") govern your use any websites that are owned or operated by ADT LLC, d/b/a ADT
More informationF3UV. Monitoring output state of UV (ultraviolet light)/illumination light source. Ultraviolet power monitor/illumination monitor.
Ultraviolet power monitor/illumination monitor Monitoring output state of UV (ultraviolet light)/illumination light source Features Optical Fiber Type Can be used as ultraviolet power monitor/illumination
More informationELECTRONIC FAUCETS INSTRUCTION MANUAL. Toll Free: (800) Haul Road Wayne, NJ krowne.
ELECTRONIC FAUCETS INSTRUCTION MANUAL 100 Haul Road Wayne, NJ 07470 Toll Free: (800) 631-0442 customerservice@krowne.com krowne.com Model 16-196 1 3 2 4 6 5 7 1. 2. 3. 4. 5. 6. 7. Aerator Sensor with Cable
More informationE3FA PHOTOELECTRIC SENSORS
EFA PHOTOELECTRIC SENSORS A n e w g e n e r a t i o n i n s e n s i n g p e r f o r m a n c e»» S i m p l i c i t y»» O n e fa m i l y fo r a l l»» N o n - s t o p d e t e c t i o n A new generation in
More informationMiniature Thermoelectric Cooler Controller MTCC-01 user's guide
Miniature Thermoelectric Cooler Controller MTCC-01 user's guide 1 Table of Contents 1. Warranty... 3 2. MTCC-01-xxx overview... 4 2.1. MTCC-01-xxx specification... 4 2.2. TE cooled detector temperature
More informationInstallation and Operations Manual
Installation and Operations Manual H-IM-LLC February 2018 Part No. 25092501 Replaces H-IM-LLC (01/2014) Lead Lag Control System Table of Contents General Safety Information 2 Inspection 2 Warranty Statement
More informationLaser Distance Sensor Type M Analog-Output
Laser Distance Sensor Type M Analog-Output Operating Manual Version 2.3, May 2009 ELAG Elektronik AG l Stegackerstrasse 14 l CH-8409 Winterthur Contents 1. Safety 1.1 Laser safety 1.2 Electrical safety
More informationE3X-HD. Smart Fiber Amplifier Unit
Smart Fiber Amplifier Unit E3X-HD CSM_E3X-HD_DS_E_2_1 Easy and optimum settings for anyone Smart Fiber Amplifier Unit with Long-term Stable Detection Equipped with Smart Tuning, which automatically configures
More informationLASER SAFETY BARRIER
LASER SAFETY BARRIER 5' x 6' Portable Laser Barrier No-Trip Base Design High CW and Pulsed Damage Thresholds SB5X6 All Contents Stored In Base OVERVIEW Features Portable 5' x 6' (1.5 m x 1.8 m) Barrier
More informationReliable Detection of Transparent Objects
NEW Transparent Object Detection Photoelectric Sensor Reliable Detection of Transparent Objects These Photoelectric Sensors Contribute to the Food and Packaging Industries by Detecting the Objects Regardless
More informationTransparent Object (PET Bottle) Detection Compact Photoelectric Sensor
Transparent Object (PET Bottle) Detection Compact Photoelectric Sensor CSM DS_E_4_ Excellent PET Bottle Detection New detection method that is independent of bottle shape, position, and contents. Automatic
More informationThis document is a preview generated by EVS
TECHNICAL REPORT IEC TR 60825-14 First edition 2004-02 Safety of laser products Part 14: A user's guide Reference number IEC/TR 60825-14:2004(E) Publication numbering As from 1 January 1997 all IEC publications
More informationNEED FOR LASER SAFETY
NEED As our use of lasers increases, we have a tendency to think of them as commonplace, and we begin to forget that these small, often invisible light sources are able to cause permanent damage to our
More informationOriginal instructions INCA-1 Emergency stop for enclosure installation INCA-1S Safety stop for enclosure installation
Original instructions INCA-1 Emergency stop for enclosure installation INCA-1S Safety stop for enclosure installation ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/lowvoltage
More informationRecommended Work Area Controls
Published on UC Davis Safety Services (https://safetyservices.ucdavis.edu) Safe Laser Practices SafetyNet #: 76 The Principal Investigator is responsible for ensuring that lasers under his/her control
More informationDuct Mount. Installation Instructions
Duct Mount Installation Instructions 00809-0600-4975 Legal Notice The Flame Detector described in this document is the property of Rosemount. No part of the hardware, software, or documentation may be
More informationE3FA PHOTOELECTRIC SENSORS
EFA PHOTOELECTRIC SENSORS A n e w g e n e r a t i o n i n s e n s i n g p e r f o r m a n c e»» S i m p l i c i t y»» O n e fa m i l y fo r a l l»» N o n - s t o p d e t e c t i o n A new generation in
More information9 W, 15 W and 25 W Industrial Fiber Laser Systems IFL Series
COMMERCIAL LASERS 9 W, 15 W and 25 W Industrial Fiber Laser Systems IFL Series Key Features Diffraction-limited light delivered through fiber termination module Single transverse mode, collimated beam
More informationPreamplifier Power Supply PPS-02 user's guide
Preamplifier Power Supply PPS-02 user's guide 1 Table of contents 1. Warranty... 3 2. PPS-02 overview... 4 2.1. PPS-02 parameters... 4 2.2. Coding the symbol of the power supply...4 2.3. PPS-02 physical
More informationDual Laser InfraRed (IR) Thermometer
User Manual Dual Laser InfraRed (IR) Thermometer MODEL 42512 Introduction Congratulations on your purchase of the Model 42512 IR Thermometer. This Infrared thermometer measures and displays non-contact
More informationTemperature Controllers E5CSV
Temperature Controllers E5CSV Simple to Set and Operate 1/16 DIN Size Controllers Easy setting using internal DIP and rotary switches / or PID control (with on-demand auto-tuning) selectable Clearly visible
More informationRutgers Environmental Health and Safety (REHS)
Rutgers Environmental Health and Safety (REHS) Program Name: Laboratory Laser Safety Program Responsible Executive: Executive Director of REHS Adopted: February 20, 2001 Reviewed/Revised: July 10, 2018
More informationOKB, OKD, & OKH Series
ISO 9001 Infrared Radiant Heaters OKB, OKD, & OKH Series Installation, Operation, Maintenance Instructions & Spare Parts CE Certified HIGH TEMPERATURE, RISK OF FIRE, FIRE/EXPLOSION HAZARD. During operation,
More informationCompact Regenerative Air Dryers DE0 DE5 Series. Catalog 9CW-AW-220
Compact Regenerative Air Dryers DE0 DE5 Series Catalog 9CW-AW-220 ! WARNING FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH,
More informationAmerican National Standard
ANSI Z136.5 2009 American National Standard American National Standard for Safe Use of Lasers in Educational Institutions Contents SECTION PAGE 1. General...1 1.1 Scope...1 1.2 Purpose...1 2. Definitions...4
More informationUltrasonic Proximity Sensor
Ultrasonic Proximity Sensor Compact, Column-shaped Sensor Capable of Sensing Range Setting Ensures the stable detection of a variety of objects regardless of the color, transparency, or material (metallic
More information100 Ft. LASER DISTANCE METER
Model #050012 Component #692527 100 Ft. LASER DISTANCE METER THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY, OPERATION, MAINTENANCE AND STORAGE OF THIS PRODUCT. BEFORE USE, READ CAREFULLY
More informationRice University Laser Safety Manual
Rice University Laser Safety Manual Environmental Health and Safety MS 123 P.O. Box 1892 Houston, TX 77251-1892 January 2014 RICE UNIVERSITY 1 Introduction The objective of the Rice University Laser Safety
More informationOriginal instructions JSNY7 Magnetic switch
Original instructions JSNY7 Magnetic switch ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.jokabsafety.com Read and understand this document Please read and understand this
More informationUniversity of North Florida Laser Safety Manual. Environmental Health and Safety Department
University of North Florida Laser Safety Manual Environmental Health and Safety Department Table of Contents PURPOSE 3 DEFINITIONS 3 RESPONSIBILITIES 4 REGISTRATION 5 EXPOSURE INCIDENTS 6 PERSONAL PROTECTIVE
More informationPressurized Filter Up to 1250 gallons
Pressurized Filter Up to 1250 gallons REMINDER CALL 1-888-755-6750 BEFORE RETURNING TO STORE. ITEM #FP1250UV Questions, problems, missing parts? Before returning to your retailer, call our customer service
More information6502B RF Distribution
6502B RF Distribution User Guide Revision A - March 2004 Part Number 15247-201 Table of Contents Table of Contents About this User Guide Purpose...................................................... 1
More informationLaser Safety Program
Laser Safety Program Revised December 14, 2017 Prepared by: Brandon S. Chance, MS, CCHO Associate Director of Environmental Health and Safety Office of Risk Management Table of Contents Introduction...
More informationExercise 1. Introduction to Sensors EXERCISE OBJECTIVE
Exercise 1 Introduction to Sensors EXERCISE OBJECTIVE When you have completed this exercise, you will be introduced to photoelectric, capacitive and inductive sensors; You will also be introduced to the
More informationpanasonic.net/id/pidsx/global Gentle start-up switches in accordance with ergonomics Reduces load on hands and fingers
687 Optical Touch Switch SW-1 SERIES Related Information General terms and conditions... F-3 General precautions... P.1595 PHOTO PHOTO Conforming to OSHA / ANSI Listing MEASURE panasonic.net/id/pidsx/global
More informationFAN COIL NON-PROGRAMMABLE DIGITAL THERMOSTAT
OWNER'S MANUAL FAN COIL NON-PROGRAMMABLE DIGITAL THERMOSTAT P/N E055-71520301 P/N E055-71520304 72 74 C OOL AUTO HEAT 70 2- or 4-pipe configurable Dual or Single Setpoint Very easy to program Large, easy
More informationOPERATION & INSTALLATION MANUAL
OPERATION & INSTALLATION MANUAL Model: SIO 14 & SIO 18 Electric Tankless Hot Water Generators Table of Contents SAFETY INFORMATION... 1 INTRODUCTION... 2 Unit Operation:... 2 Unit Freezing:... 3 Maintenance:...
More informationAUR300C, AUR350C. Advanced Ultraviolet Burner Controller
No. CP-SS-7E Overview The AUR300C is a burner controller with a dynamic selfchecking function and is used in combination with the AUD300C or AUD00C Advanced Ultraviolet Flame Detector. This AUR300C controls
More informationMODEL 8143 SIGNAL SELECTOR INSTALLATION AND OPERATION MANUAL
MODEL 8143 SIGNAL SELECTOR INSTALLATION AND OPERATION MANUAL 95 Methodist Hill Drive Rochester, NY 14623 Phone: US +1.585.321.5800 Fax: US +1.585.321.5219 www.spectracomcorp.com Part Number 8143-5000-0050
More informationM12 Class 1 Laser Emitter
Datasheet IEC Class 1 Laser for Use with Banner Modulated Receivers A low-power device emitting a visible red beam, 650 nm wavelength Beam is bore-sighted to within 2 milliradians and 0.25 mm of the housing
More informationPM-200 Power Module Operating Instructions
PM-200 Power Module Operating Instructions Terahertz Technologies Inc. 169 Clear Road, Oriskany, NY 13424 (315) 736-3642 FAX (315) 736-4078 E-mail tti@borg.com Contents Introduction... 1 Specifications...
More informationPURPOSE OF THE PROCEDURE
Title: Non-Ionizing Radiation Procedure Effective Date: November 2005 Revision Date: January 13, 2017 Issuing Authority: Responsible Officer: VP, Facilities and Construction Management Director Environmental
More informationOperations Manual. Motion Detector Module Model ZS10
Motion Detector Module Model ZS10 The must be referred to for correct installation. Failure to comply with the shall void all warranties and liabilities. Overview The ZS10 Motion Detector Module is an
More informationModel AD C AD RS-422 Distributor
Model C AD RS-422 Distributor Installation and Operation Instructions Speed LT, Speed, Speed Ultra, Speed Optima, and Speed Optima LT The C Distributor is used to interface American Dynamics Switching
More informationDUQUESNE UNIVERSITY. Laser Safety Program
DUQUESNE UNIVERSITY Laser Safety Program Prepared by: Environmental Health and Safety Department TABLE OF CONTENTS Page Purpose 1 Scope 1 Introduction 1 Registration of Laser Systems 2 Laser Safety Training
More informationPreface. Consult the current Laser Safety Officer at for specific information.
Preface The privilege to use lasers (non- ionizing radiation) at Stanford University requires each individual user to follow and adhere to the guidelines recommended in the American National Standard Institute
More informationGG-R REFRIGERANT SENSOR. Installation and Operation Manual
GG-R REFRIGERANT SENSOR Installation and Operation Manual 2 GG-R Warning Use this product only in the manner described in this manual. If the equipment is used in a manner not specified by Calibration
More informationSENSORS. S8 Series HIGHLIGHTS APPLICATIONS. Phone: Fax: Web: -
The sensor is designed for frequent washdowns with a corrosion-resistant AISI316L stainless steel case IP69K rated, compliant to test environments like indicated by Diversey and Ecolab. However, all models
More informationCompact, Photoelectric Sensor with Built-in Amplifier and Teaching Function. Mark Sensor with Stainless Steel Housing
Mark Sensor with Stainless Steel Housing Compact, Photoelectric Sensor with Built-in Amplifier and Teaching Function Color Mark Detection a World-standard Size ( x 2 x 32 mm) High speed response (50 µs)
More informationNLC C61 Air-Cooled Argon-ion Laser
NLC C61 Air-Cooled Argon-ion Laser User s Manual Complete with Operating Instructions for the 9470 and 2270 Power Supply TABLE OF CONTENTS CHAPTER 1: INTRODUCTION 1 CHAPTER 2: LASER SAFETY 2 CENTER FOR
More informationBSF4-AH80. Flameproof Type Light Curtain Type 4. Globally-compliant flameproof structure. Ample protective height 1,595 mm 62.
637 PHOTO PHOTO Flameproof Type Curtain Type 4 General terms and conditions... F-7 Related Information Glossary of terms... P.1455~ Sensor selection guide... P.497~ General precautions... P.1458~ Conforming
More informationBX Series. Installation, Operation, Maintenance Instructions & Spare Parts
ISO 9001 BX Series Installation, Operation, Maintenance Instructions & Spare Parts WARNING WARNING. The BX convection heater is a heavy duty baseboard designed for use in industrial environments and is
More informationenproteko.com Specifications Ratings Item voltage to 24 VAC 5/6 Hz 24 VAC 5/6 Hz or 24 VDC Allowable voltage Characteristics 85% to 11% of power suppl
enproteko.com Temperature Monitoring Relay K8AB-TH Compact and Slim Relay Ideal for Temperature Alarms and Monitoring Excessive increases can be prevented and abnormal s can be monitored. Temperature monitoring
More informationUsers Manual. LAURUS Systems, Inc. - Ph: Fax:
Users Manual LAURUS Systems, Inc. - Ph: 410-465-5558 - Fax: 410-465-5257 - www.laurussystems.com Introduction The rad-d is a security and inspection system that detects emissions from radioactive material.
More informationLASER SAFETY PROGRAM
LASER SAFETY PROGRAM GUIDE FOR THE SAFE USE OF LASERS FOR CALIFORNIA STATE UNIVERSITY, LOS ANGELES (CSULA) December 2012 PROGRAM APPROVAL AND AUTHORIZATION James M. Rosser, President Date Contents 1.0.
More informationCD6102 / CD6102 OC / CD6102-2
PreView Display CD6102 / CD6102 OC / CD6102-2 Operating Manual www.previewradar.com PATENTS Patented under one or more of the following U.S. Patents: 5345471, 5523760, 5457394, 5465094, 5512834, 5521600,
More informationM3050 Detector Operator s Manual
FABRICON SYSTEMS ALBERTA 2008 INC. Keeping you in Front M3050 Detector Operator s Manual Telephone: (403)652-2127 Mailing Address: Shipping Address: Fax: (403)652-3027 Box 5996 402 Ellis Crescent S.E Email:
More informationWide Range InfraRed (IR) Thermometer with Type K input and Laser Pointer
User Manual Wide Range InfraRed (IR) Thermometer with Type K input and Laser Pointer MODEL 42515 Introduction Congratulations on your purchase of the Model 42515 IR Thermometer. The Model 42515 IR thermometer
More informationPART V: WORKING WITH LASERS
PART V: WORKING WITH LASERS A. Introduction A laser is a device which when energized, emits visible and/or invisible coherent electromagnetic radiation. This radiation is emitted over a wide range of the
More informationBuying goods/services
General contractual provisions Buying goods/services These are the only contractual provisions that apply between Fire and Emergency New Zealand and the Contractor. If any other provision is to apply or
More informationAdvanced Ultraviolet Burner Controller
No. CP-SS-7E Advanced Ultraviolet Burner Controller Model AUR300C/AUR30C Overview The AUR300C Advanced Ultraviolet Burner Controller and AUR30C Advanced Ultraviolet Burner Controller with Communication
More information