Inline measuring of UV LED & conventional UV lamps

Transcription

1 Inline measuring of UV LED & conventional UV lamps UV Seminar Warsaw Efsen Engineering A/S Denmark

2 Agenda 08:00-09:00 Registration and Coffee 09:00-09:20 Start of Seminar welcome & introduction T. Efsen 09:20-10:00 UV Today: The technology shift to UV LED T. Efsen An introduction to the UV market today, and where and why UV LED is making entry 10:00-10:30 Status of UV LED chemistry and applied chemistry D. Ivarsson For which applications does current UV LED Chemistry apply today, and what is the expectations for the near future. 10:30-11:00 Coffee break 11:00-11:45 UV LED Cases (Moldings, Boards and Floorings) T. Efsen We will go through 3 different applications where UV LED can work as well as discuss the benefits of converting to UV LED 11:45-12:15 Measuring UV LED 1 J. Raymont EIT EIT update on measurement technology for UV LEDs 12:15-12:45 ICAD Inline measuring of UV LED & conventional UV lamps - A.Winther/T. Efsen The importance of measuring UV LED and introduction to ICAD Technology for this. 12:45-13:45 Lunch break 13:45-14:30 EIT Product update J. Raymont EIT Introducing PowerMap 2, LEDCure 395 and future instruments 14:30-14:45 UV Safety K. Efsen Safety is important, and we will shortly update on the most critical safety issues anybody should be aware of 14:45-15:45 Maintenance and Upgrading of Mercury based UV systems T. Efsen There are many systems out there, we give you some good ideas for making them work better at low cost 15:45-16:00 Sum up of the day and Q & A about equipment from you! Closing up all we learned and answering any questions that has come up 16:00- Network and drinks 16:00-17:30 Individual meeting with Efsen representative, networking and drinks Here you can book time with Efsen representatives to discuss your own production or application. 27 October 2017 Page 2

3 Why we meassure? To get HIGH QUALITY and SAFE products 27 October 2017 Page 3

4 This is what we do today 27 October 2017 Page 4

5 And now comes UV LEDs 27 October 2017 Page 5

6 And we have to measure multiple times 27 October 2017 Page 6

7 It is the LED challenge 27 October 2017 Page 7

8 Now we do this in Wood! Inline ContinousC Automated A DynamicD - tecnology 27 October 2017 Page 8

9 Background for ICAD Development Rising problems with newly installed UV LED solutions Many years of working with UV Measurement and proces documentation Many requests for inline continous monitoring, due to increased focus on UV process Many requests for UV measurement on a printing press how to do with instrument.? 27 October 2017 Page 9

10 1. Measurements of an array of 5 heads of a total of 1500mm 27 October 2017 Page 10

11 Test objectives 1. UV LED-array measurement: how accurate can we monitor and measure an array of UV LEDs? 2. W-LED or P-LED Calibration : to what level is it possible to measure the UV LED array and afterwards rapidly adjust it to linearity? 3. Microwave UV mercury lamps placed side by side: how is the uniformity along the row of microwave powered UV lamps? 4. Shadow effect of ICAD Sensor: We want to evaluate the effect of the shadow generated by the rod travelling in front of the UV source with regards to irradiance drop and UV energy loss. W-LED is a fully integrated UV LED system with Power Supply, control and ICAD technology all working together from Efsen 27 October 2017 Page 11

12 2. Calibration of an array of 5 heads of a total of 1500mm +-2% 27 October 2017 Page 12

13 0,5 4 7, , , , , , , , , , , , , , , , , , ,5 W-LED Uniformity and internal calibration 2 1,9 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1 Calibrated W-LED-8 (60mm - 100% - 4heads 1200mm) 27 October 2017 Page 13

14 Test objectives 1. UV LED-array measurement: how accurate can we monitor and measure an array of UV LEDs? 2. W-LED Calibration : to what level is it possible to measure the UV LED array and afterwards rapidly adjust it to linearity? 3. Microwave UV mercury lamps placed side by side: how is the uniformity along the row of microwave powered UV lamps? 4. Shadow effect of ICAD Sensor: We want to evaluate the effect of the shadow generated by the rod travelling in front of the UV source with regards to irradiance drop and UV energy loss. W-LED is a fully integrated UV LED system with Power Supply, control and ICAD technology all working together from Efsen 27 October 2017 Page 14

15 3. Uniformity on Microwave lamps 27 October 2017 Page 15

16 Relative Power Relative Power 3. Uniformity on Microwave lamps 120W/cm One F300 - in focus (53mm) 100,0 90,0 80,0 70,0 60,0 50,0 40,0 30,0 20,0 10,0 0, mm Two F300 No gap - in focus (53mm) 100,0 90,0 80,0 70,0 60,0 50,0 40,0 30,0 20,0 10,0 0, mm 27 October 2017 Page 16

17 Relative Power 240W/cm 3 lamps -750mm 3x10 240W/cm lamps at 100% Power - 12 aample average October 2017 Page 17

18 Test objectives 1. UV LED-array measurement: how accurate can we monitor and measure an array of UV LEDs? 2. W-LED Calibration : to what level is it possible to measure the UV LED array and afterwards rapidly adjust it to linearity? 3. Microwave UV mercury lamps placed side by side: how is the uniformity along the row of microwave powered UV lamps? 4. Shadow effect of ICAD Sensor: We want to evaluate the effect of the shadow generated by the rod travelling in front of the UV source with regards to irradiance drop and UV energy loss. W-LED is a fully integrated UV LED system with Power Supply, control and ICAD technology all working together from Efsen 27 October 2017 Page 18

19 4. Shadow effect 27 October 2017 Page 19

20 4. Shadow effect 13mm We can then calculate the energy loss to be (2.230/2.343) = 4,83% during the whole pass of the sensor for the 13mm test 27 October 2017 Page 20

21 4. Shadow effect 38mm We can then calculate the energy loss to be (2.512/2.531) = 0,8% during the whole pass for the 38mm test. 27 October 2017 Page 21

22 Key to success with UV LED Chemistry Chemistry and UV LED must match Correct UV equipment choice W vs. W/cm2 Dose Cooling of LED-dies Correct air filtration and handling for air-cooled modules Leak prevention for water-cooled LED modules Process control measuring LED Process documentation and measuring in line for changes Economy - LED vs. Arc LED equipment should exchange 2 arc-lamps for retrofitting For new line investment, LED should exchange just one arc-lamp Chemistry should be same price or less with LED 27 October 2017 Page 22

23 0,5 4 7, , , , , , , , , , , , , , , , , , ,5 0,5 4 7, , , , , , , , , , , , , , , , , , ,5 W-LED Uniformity and internal calibration 2 1,9 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1 Un-Calibrated W-LED-8 (60mm - 100% - 4heads 1200mm) -16% 2 1,9 1,8 1,7 1,6 1,5 1,4 1,3 1,2 1,1 1 Calibrated W-LED-8 (60mm - 100% - 4heads 1200mm) -5% 27 October 2017 Page 23

24 Vision of Efsen LED for wood - W-LED The UV Design thinking The economy High peak intensity at a distance high dose Various wavelenghts Constant dose over time Uniform exposure documented with calibration cyclus One standard fits all (cure widths and conveyor models) Easy to install no need for technichian Compact minimum footprint Clean air handling Modern design Focus on air-cooling optimal LED atmosphere Selectable add ons Affordable Energy saving Competitive to normal UV less than 2 years payback 27 October 2017 Page 24

25 W-LED Distributed world wide High intensity in a distance 365nm, 395nm and 405nm available Air-cooled modules inside just add clean air or use W-AIR module LED housing and Electrical cabinet in one module no need for cabling and floors space for cabinets etc. Touch screen interface on operator side Easy access to service and maintenance Available in 900, 1050, 1200, 1350 and 1500mm curing width Height adjustable from touch screen Plug and play installation by electrician no need for expensive service technician Ready for Integrated measurement system (2017) 27 October 2017 Page 25

26 Integrated electrical cabinet 27 October 2017 Page 26

27 Plug n play no technichian needed Just add power and line signal then go to screen to setup. 27 October 2017 Page 27

28 27 minuttes!!! From pallet to lamp on 27 October 2017 Page 28

29 W-Air module W-Air W-Height 27 October 2017 Page 29

30 W-LED Rent a Demo You can install it yourself in 30min and run full width inline test at your customer Do full scale inline test at customer or your own line 27 October 2017 Page 30