Laboratory Safety Laboratory Inspection Checklist
|
|
|
- Augustine Garrett
- 5 years ago
- Views:
Transcription
1 Laboratory Safety Laboratory Inspection Checklist Date Lab Information Department Principal investigator (PI) PI telephone number PI address Building Lab room numbers Lab phone number Radiation Biosafety 2 or greater Lasers Animals Chemical Types Present Particularly Hazardous Substances (select carcinogens, acute toxins, reproductive toxins) Regulated carcinogens Pyrophorics Water Reactives Flammables Explosives Peroxide Formers Corrosives Personnel Information First Name Last Name UID Explanation of Ratings 1: Compliant 0: Non compliant/not acceptable N/A: Not applicable *Denotes Administrative Deficiency S: Serious finding that must be corrected within 48 hours or less, depending on severity of finding. WRK Rev. 6/05/2013 ENVIRONMENTAL HEALTH AND SAFETY
2 Inspection Information Inspector Accompanied by Documentation & Training Lab Safety Manual (CHP) accessible CHP training including lab specific safety training documented (employees and students) Documented Hazardous Waste Handling Training (haz wst generators) Laboratory accidents and safety concerns documented Hazard Communication Emergency & Safety Information MSDS accessible (i.e., hard copy or on-line) MSDS location known to each employee SOP available (for lab specific hazardous equipment or activity) Containers labeled with contents (full name, hazard warning, and date; no conflicting labels) Chemical inventory is current and accurate Chemical storage cabinets labeled (i.e., corrosives, flammables, etc ) Emergency assistance information posted in lab NFPA fire diamond posted Fire Safety Storage clearance from ceiling: 18 with sprinklers, 24 without sprinklers
3 Fire extinguisher present/charged/accessible/tag updated; signage clearly visible General Safety Exits/aisles/corridors are not blocked (24 minimum width) Laboratory doors kept closed Approved safety shower & eyewash station accessible within 10 seconds (travel distance no greater than 100 feet) Emergency shower / Eyewash Station inspected monthly Clearance area around safety shower at least 16 in each direction. Signage clearly visible. Chemical spill material or kit available, spill procedures known to staff Gas cylinders secured upright to a stable structure (i.e., wall or with clam shell/frame casing.) Gas cylinder valve protection cap in place when not in use Refrigerators/freezers labeled with food and drink specifications Sink available for hand washing Personal Protective Equipment (PPE) Housekeeping Closed-toe shoes and long pants worn by laboratory personnel Lab coats worn Gloves worn Eye protection worn (Goggles must be worn for procedures involving chemical splashes) Adequate supply of specialty PPE available (i.e. UV/IR glasses, face shields, lab aprons, cryogenic gloves) No food or drink in lab areas
4 Secondary containment provided for floor storage of glass bottles that contain chemicals. Minimal glassware on bench top, sink, and fume hoods Proper waste disposal of sharps (broken glass, pipettes, needles, razors, etc) Sharps containers less than ¾ full Chemical Storage and Compatibility Fume Hoods Less than 10 gallons of flammables located outside flammable storage cabinet Maximum of 60 gallons flammable liquids per flammable storage cabinet, maximum of 3 flammable storage cabinets per lab/fire area. Flammable storage refrigerator/freezer approved and labeled Minimal acids stored outside corrosive cabinet Strong acids and strong bases stored in secondary containers Incompatible materials properly segregated Chemicals stored safely (e.g. seismic restraints, etc.) Combustible materials not stored with flammable chemicals Chemical storage cabinets clearly labeled (i.e. flammables, corrosives, etc.) Chemical containers in good condition Corrosive chemicals stored below eye level Ethers and other peroxide formers dated Water reactive chemicals segregated, contained, and labeled Carcinogens segregated and stored in designated areas. Pyrophoric chemicals segregated, contained, and labeled Certified within one year
5 Proper sash height indicated Sash at or below marked approval level Sash stoppers functional where present Hood illumination functional Fume Hoods Biosafety Cabinets Audible/visual alarm functional Functional fume hood not used for storage Certified within one year Chemical Waste Disposal and Transport All hazardous waste labeled with conforming label Chemical waste containers in good condition and kept closed (i.e. no funnels in place) Hazardous waste in secondary containment Chemical waste disposed when full or within 90 days, whichever is sooner All hazardous waste identified Waste labels filled out completely Seismic Safety Shelving and file cabinets 5 or over anchored/bolted
6 Seismic Safety Storage shelves have seismic restraints (e.g. lips, bars, bungee cords) High overhead storage is secured Heavy items stored on lower shelves Mechanical and Electrical Safety Moveable parts guarded on equipment as appropriate Electric panel accessible Nothing posted on electric panel Plugs, cords, outlets in good condition No overloaded outlets, no daisychained power strips Extension cords only present for immediate use and do not pose trip hazards (i.e., taped down, covered) No power cords found under doors, carpets, or through ceilings
Laboratory Information
Laboratory Information Lab Information Department Room number and function Principal investigator (PI) PI telephone number PI email address Lab Safety contact person Lab Safety contact telephone number
University of California, Davis Laboratory Self-Inspection Checklist
University of California, Davis Laboratory Self-Inspection Checklist Principal Investigator/Laboratory Supervisor: Laboratories Reviewed: Date: Reviewer: Revised 11/2014 I. SAFETY PROGRAM ADMINISTRATON
LABORATORY INSPECTION CHECKLIST
LABORATORY INSPECTION CHECKLIST Date of Inspection: Conducted by: Department: Building/Room #: Principal Investigator: PI Present? Yes No Type of Inspection: Semi-Annual (scheduled) Complaint Follow Up
Laboratory Safety Audit
Laboratory Safety Audit Principal Investigator: Building: Room #: Auditor: Date: Lab Safety Plan 1. Lab safety plan available 2. Plan reviewed/evaluated annually 3. Current Lab Safety Guide available 4.
1. Researchers are familiar with the location and contents of: The lab s Chemical Hygiene Plan YES NO
Safety Self-Inspection Checklist for Laboratories One Inspection form per Laboratory Room DATE: BUILDING: ROOM: INSPECTOR: Professor Inspector s Signature Professor s Signature: Answer each question by
Laboratory Safety Audit
Laboratory Safety Audit Principal Investigator: Building: Room #: Auditor: Date: Lab Safety Plan 1. Lab Safety Plan available 2. Plan reviewed/evaluated annually 3. Current Lab Safety Guide available Personnel
Laboratory Inspection Checklist
Laboratory Inspection Checklist Principal Investigator _ Department Building and Room Inspected By Date SUMMARY OF INSPECTION FINDINGS A. No items of non-compliance or unsafe conditions were identified.
LABORATORY CHEMICAL HYGIENE AND SAFETY PLAN
LABORATORY CHEMICAL HYGIENE AND SAFETY PLAN Laboratory Room Number (s) Building Principle Investigator or Responsible Individual (s) Date Review / Revision Date INTRODUCTION Kent State University has made
WORKPLACE INSPECTION CHECKLIST FOR LABORATORY ENVIRONMENTS
WORKPLACE INSPECTION CHECKLIST FOR LABORATORY ENVIRONMENTS Standard OHS Workplace Inspection Checklist Review Date: Next Review: Inspection Site: Inspection Team: Contacts: Written Laboratory Safety Policies/Procedures/Records
QUARTERLY LABORATORY INSPECTION FORM
Instructions: Checklist items should be answered Yes, No, or Not applicable. For every item answered No, provide the Corrective Action. Once corrected, provide the date the correction is completed. Items
WTAMU Academic Research Environmental Health and Safety (AR-EHS) Laboratory Inspection Checklist
WTAMU Academic Research Environmental Health and Safety (AR-EHS) Laboratory Inspection Checklist Date of Inspection: Location (room # & building): Conducted By: Laboratory Title: Principal Investigator/Supervisor:
WTAMU Academic Research Environmental Health and Safety (AR-EHS) Laboratory Inspection Checklist
WTAMU Academic Research Environmental Health and Safety (AR-EHS) Laboratory Inspection Checklist Date of Inspection: Laboratory Title: Location (room # & building): Principal Investigator/Supervisor: Site/Lab
WORKPLACE SAFETY INSPECTION CHECKLIST
WORKPLACE SAFETY INSPECTION CHECKLIST (To be done once every 2 weeks) This form is to be submitted electronically in PDF format to TANCY@ntu.edu.sg A different form is to be filled for each room, for PIs
A. General Safety LAB/ROOM: INSPECTED BY: DATE:
A. General Safety Item Subject Yes, No, A1 Exits are not obstructed, fastened or locked with keys A2 EXIT signs, if installed are clear and illuminated A3 A4 A5 A6 Fire extinguishers and fire blankets
Fire/General Safety Review Program Key Performance Indicators Environmental Health and Safety
Fire/General Safety Review Program Key Performance Indicators Environmental Health and Safety Fire and CO Detection Systems Fire alarm pull station obstructed. Annunciation panel obstructed. Lack of approved
INDIAN INSTITUTE OF TECHNOLOGY BOMBAY
INDIAN INSTITUTE OF TECHNOLOGY BOMBAY SAFETY AUDIT CHECKLIST Biosafety Audit Checklist Yes No NA Whether lab coats used for laboratory work are full sleeve and with snap buttons? Are there enough lab coats
ILLINOIS INSTITUTE OF TECHNOLOGY SAFETY POLICY COMMITTEE. Laboratory Safety Inspection Policy
ILLINOIS INSTITUTE OF TECHNOLOGY SAFETY POLICY COMMITTEE Laboratory Safety Inspection Policy Approved: October 10, 2005 Reviewed and Modified: January 11, 2016 TABLE OF CONTENTS Section Page 1. Purpose
Safety In Chemistry. Identified Risks and Hazards
Safety In Chemistry ] Introduction Students have a duty of care to minimize and eliminate chemical risk and hazards through proper use of laboratory equipment and to be prudent of potential dangers associated
EAST TENNESSEE STATE UNIVERSITY LABORATORY/CLINIC SAFETY INSPECTION PROGRAM
EAST TENNESSEE STATE UNIVERSITY LABORATORY/CLINIC SAFETY INSPECTION PROGRAM Scope: People who work in scientific laboratories are exposed to many potential hazards. Laboratories involve a greater variety
HEALTHCARE SAFETY INSPECTION
Facility/Location: HEALTHCARE SAFETY INSPECTION Inspected By: Date: OPERATING ROOM YES NO HAZARD CORRECTIVE ACTION Initial & Date 1. Has a designated safety person been appointed to oversee OR safety issues?
General Procedures: Materials Synthesis Lab 1358 CNAM/Toll
STANDARD OPERATING PROCEDURE Updated: Jun 7, 2018 General Procedures: Materials Synthesis Lab 1358 CNAM/Toll The purpose of these Standard Operational Procedures (SOPs) is to define the standard set of
Penn State University. Laboratory Environmental Health and Safety Handbook
Penn State University Laboratory Environmental Health and Safety Handbook TABLE of CONTENTS 1. INTRODUCTION 1 Page 2. GENERAL SAFETY 2.1 General Safety Guidelines 1 2.2 Good Housekeeping 2 2.3 Entrances,
University of Maryland Baltimore Environmental Health and Safety updated 1/3/2018 General Lab Inspection Common Findings and Corrective Actions
BIOLOGICAL Animals or plants in lab not related to Are all plants or animals in the lab related Animals or plants in lab not related to research: Only animals and plants directly related to Remove non
Chapter 10: Laboratory Equipment
Chapter 10: Laboratory Equipment Guides to Standard Laboratory Equipment Equipment Approval Prior to purchasing or installing the following equipment, acquire the PI and CHO approval and consult with EHSO:
Laboratory Inspection (version 3) Criteria Action Plan
Laboratory Inspection (version 3) Criteria Action Plan Auditor: Jane Knipe Assigned Date: 7 Aug 2015 Audit Date: - Closure Date: - Comments: Category: Entity Workplace Inspections The University of Adelaide
Sample Safety Inspection Checklist for Schools
INSPECTION Health and CHECKLIST Safety Committees 1 Sample Safety for Schools School: Date: Inspected By: Each No answer may indicate a problem. Floors and Walkways Are walkways and stairways kept clear
WORKPLACE EVALUATION CHECKLIST & REPORT
Work Center: Supervisor: Telephone Number: Building & Room Number: Date of Last Evaluation: Date: WORKPLACE EVALUATION CHECKLIST & REPORT ITEM YES NO N/A COMMENTS Has this area been surveyed in the last
Sample Safety Inspection Checklist
INSPECTION HEALTH AND CHECKLIST SAFETY COMMITTEES 1 Sample Safety Workplace: Date: Inspected By: Each No answer may indicate a problem. Yes No FLOORS AND WALKWAYS Are walkways and stairways kept clear
Dangerous Waste Generator Training. How do I properly manage wastes generated in my work area?
Dangerous Waste Generator Training How do I properly manage wastes generated in my work area? What is a Dangerous Waste Characteristic waste Corrosive Flammable Reactive What is a Dangerous Waste Toxicity
Chemical Science Lab High Risk Workspace Inspection Form
Chemical Science Lab High Risk Workspace Inspection Form 1. High Risk Chemical Science Lab Workspace College Pierre Elliot Trudeau Science Department (CPET-SCI) Kildonan East Collegaite Science Department
CHM 130LL: Lab Safety Name: Answer Key _ Section:
Introduction: CHM 130LL: Lab Safety Name: Answer Key _ Section: Safety in the chemistry laboratory is the primary concern of all scientists. Everyone who works in a chemistry lab is responsible for keeping
1. Conduct yourself in a responsible manner at all times in the laboratory.
LAB SAFETY GENERAL RULES 1. Conduct yourself in a responsible manner at all times in the laboratory. THIS INCLUDES: Staying OFF of your cell phone. Help your Lab Partners, don t just sit back and let them
MONTHLY SAFETY INSPECTION REPORT
MONTHLY SAFETY INSPECTION REPORT Date of Inspection: Company: Persons Participating in Inspection: POSSIBLE S EXTERIOR / PARKING LOT Are all parking areas well lit? Are parking areas free of snow, ice
Judah Young Occupational Safety Specialist Radiological & Environmental Management (REM)
Judah Young Occupational Safety Specialist Radiological & Environmental Management (REM) Ensure and improve the safety of students and employees by Fostering a culture of safety dedicated to continuous
THE UNIVERSITY OF THE WEST INDIES Mona Campus Human Resource Management Division (HRMD) Environmental and Occupational Health and Safety Manual
SECTION I GENERAL SAFETY EOHS 01-000 Introduction (HRMD 1,2,3) EOHS 01-001 Responsibilities (HRMD 4) EOHS 01-002 Emergency Information (HRMD 34) EOHS 01-003 Incidents and Injuries (HRMD 10) EOHS 01-004
1. Conduct yourself in a responsible manner at all times in the laboratory.
1. Conduct yourself in a responsible manner at all times in the laboratory. 2. Follow all written and verbal instructions carefully. If you do not understand a direction or part of a procedure, ask the
MANAGEMENT WORKPLACE SPECIFIC INSPECTION CHECKLIST Department: Burwash Dining Hall/Ned s Cafe
Department: Burwash Dining Hall/Ned s Cafe KITCHEN SAFETY CHECKLIST YES NO N/A Has the staff received Safe Food Handling and WHMIS training? Are all floors kept clear of water, grease and food additives?
Green Chemistry Safety Training PSE/CH 335. Departments of Forest Biomaterials and Chemistry North Carolina State University
Green Chemistry Safety Training PSE/CH 335 Departments of Forest Biomaterials and Chemistry North Carolina State University Lab Rules: Wear the proper clothing and shoes in the lab. Use the appropriate
Department Of Public Works: Internal Operations
Department Of Public Works: Internal Operations A Checklist There are over 800 municipalities in the Michigan Municipal League s Pool and Fund Programs. Most perform public works functions of one type
EH&S Presents. Thursday, February 28, 2013
EH&S Presents Thursday, February 28, 2013 Agenda EH&S Announcements UC Lab Safety Settlement Update Cal/OSHA Inspections Lessons Learned Green Labs Presentation EH&S Announcements EH&S Announcements Hazardous
LAB SAFETY FOR CUSTODIANS
LAB SAFETY FOR CUSTODIANS Lab Waste Biological Waste Chemical Waste Regulated Medical Waste Non- Regulated Medical Waste Radioactive Waste Biohazardous Waste (Regulated Medical Waste) Wastes that are exposed
School of Forest Resources. Annual. Safety Training. Mike Day, SFR Safety Coordinator. Hardhats. Gloves. Fall protection harnesses
School of Forest Resources Hardhats Gloves Annual Fall protection harnesses Safety Training Mike Day, SFR Safety Coordinator Steps to completion for SFR Webbased annual safety training: (1) View this presentation
-SAMPLE- Safety Inspection Checklist: Manufacturing
-SAMPLE- Safety Inspection Checklist: Manufacturing Prepared by: Midwest Builders Casualty The following procedures are not intended to be an exhaustive treatment of the subject, and should not be interpreted
FLOORS & WALKING SURFACES Y N N/A Corrective Actions Are ALL employees wearing approved slip-resistant footwear?
SAMPLE RESTAURANT SAFETY INSPECTION CHECKLIST (Worker Injury Prevention) This Restaurant Safety Inspection Checklist is designed to help assist your organization identify and initiate corrective actions
Polymer Characterization Facility 165 S. T. Olin Laboratory. Lab Safety Orientation
Polymer Characterization Facility 165 S. T. Olin Laboratory Lab Safety Orientation Anthony Condo Facility Manager B-71 S. T. Olin 5-9021, amc88@cornell.edu Emergency Contacts In the event of an emergency,
STUDENT SAFETY RULES
STUDENT SAFETY RULES Purpose Science is a hands-on laboratory class. You will be doing many laboratory activities that require the use of hazardous chemicals. Safety in the science classroom is the #1
IWEA SAFETY COMMITTEE PLANT SAFETY AUDIT (Revised 03/2016)
IWEA SAFETY COMMITTEE PLANT SAFETY AUDIT (Revised 03/2016) Name and Address of contact persons for IWEA: Inspector: Date: Name of Facility for Plaque: Place a "1" in the Column That Applies OFFICE, PROGRAMS,
2008 NYC Fire Code. New Laboratory Standards. Operational & Maintenance Provisions effective July 2008
2008 NYC Fire Code New Laboratory Standards Operational & Maintenance Provisions effective July 2008 Design & Certificate of Fitness Requirements Effective July 1, 2009 History The new Fire Code legislation
Department of Civil and Environmental Engineering University of Waterloo
Department of Civil and Environmental Engineering University of Waterloo Safety Information for Environmental Labs This information is relevant for the following rooms in DWE: DWE-1407 DWE-1417 DWE-1421
Safety instructions and routines on lab Faculty of Odontology Malmö University
Safety instructions and routines on lab Faculty of Odontology Malmö University 2018-04-12 Welcome to Faculty of Odontology This compendium contains the general safety instructions for laboratory work at
General Safety Training
General Safety Training May 20, 2015 Outline Purpose Chancellor s Policy Statement Safety Responsibilities General Safety Rules Hazard Communication Reducing Hazard Exposure Fires and Fire Extinguishers
August Safety Subject
August Safety Subject Housekeeping Don t overload the top drawers of a file cabinet or open more than one drawer at a time. Do not leave drawers open while unattended. All cords, cables and wires should
1. Accident Prevention
Office of Environmental Health & Safety Facility Inspection Program 333 S. Beaudry Avenue, 20 th Floor Los Angeles, Ca 90017 Phone: (213) 241-3199 Fax: (213) 241-6816 SCHOOL SAFETY COMPLIANCE CHECKLIST
Chemistry 11 Laboratory Safety Guidelines
Chemistry 11 Laboratory Safety Guidelines General Rules: Conduct yourself in a responsible manner at all times in the laboratory. Absolutely no running or horseplay in the lab. Be familiar with your lab
ANNUAL SAFETY UPDATE. Hazmat Review and Emergency Evacuation Procedures Training STUDENT VERSION
ANNUAL SAFETY UPDATE Hazmat Review and Emergency Evacuation Procedures Training STUDENT VERSION Public Safety Department Updated 8/31/2017 This training will cover: Chemical Right-To-Know short summary
Lab Safety presentation and contract first day of lab know the locations of everything in your lab no student can participate in class without signed
Lab Safety presentation and contract first day of lab know the locations of everything in your lab no student can participate in class without signed contract Lab inspections Safety Office will be randomly
Laser Class 4 Laser Type Nd-YAG Laser Manufacturer New Wave Research Laser Model SoloII-30 PIV Laser Serial / Id # Serial number 16582
THIS IS AN EXAMPLE OF A STANDARD OPERATING PROCEDURES RECOMMENDED OR REQUIRED FOR YOUR LABORATORY. YOU CAN USE THIS DOCUMENT AS A GUIDELINE. IF YOU HAVE ANY QUESTIONS, CONTACT CARINE VANPETEGHEM AT CVANPETE@UOTTAWA.CA
Science Department Safety Training Notes
SCIENTIFIC Science Department Safety Training Notes Discussion and Notes Five-Minute Safety Inspection Our Five-Minute Safety Equipment Inspection can be used to quickly and easily evaluate the readiness
INSTRUCTIONS TO COMPLETE INSPECTION FORM:
INSTRUCTIONS TO COMPLETE INSPECTION FORM: The online version of this form is official. Therefore, all printed versions of this document are unofficial copies. 1. The checklist shall be completed monthly
Student Lab Procedures. Lab Safety Orientation
Student Lab Procedures Lab Safety Orientation These basic rules should be followed by you & your students. The key to teaching lab safety is to role model it first. A class should be spent on: Location
University of Maryland Baltimore Environmental Health and Safety updated 1/3/2018 RADIOACTIVE Lab Inspection Common Findings and Corrective Actions
If a laser is being used, is it currently registered with the Office? Area is not registered for the use of lasers Authorization for use of radioactive materials is not current Is the authorization for
Lab Safety. Section 2L. Chemistry I & II
Lab Safety Section 2L Chemistry I & II 1 Lab Safety Topics General Rules Clothing Accidents and Injuries Handling Chemicals Handling Glassware and Equipment Heating Substances First Aid 2 General Rules
Polymer Characterization Facility 165 S. T. Olin Laboratory. Lab Safety Orientation
Polymer Characterization Facility 165 S. T. Olin Laboratory Lab Safety Orientation Anthony Condo Facility Manager B-71 S. T. Olin 5-9021, amc88@cornell.edu Emergency Contacts In the event of an emergency,
General Safety Training
Environmental Health and Safety General Safety Training Revised February 3, 2017 Outline Purpose Chancellor's Policy Statement Safety Responsibilities General Safety Rules Hazard Communication Reducing
Instrumentation Development Lab. Standard Operation Procedures (SOP)
Instrumentation Development Lab Standard Operation Procedures (SOP) Table of Contents Page 1: Fume Hood Operation Page 2: Soldering Iron Operation Page 3: Chemical Spill Procedure Page 4: Requirements
Group Member Contact Information. Laboratory Supervisor: Off campus tel: Off campus tel: Name, room Address Phone Number
Group Member Contact Information Laboratory Supervisor: Off campus tel: Off campus tel: Name, room Address Phone Number Record of Safety Training Completed by Workers Worker s Name (printed) Safety Training
If there are emergency situations they should be reported to Maintenance Department immediately.
To: From: Re: Mercer County Schools Principals Mercer County Schools Safety Committee Required Safety Reports Date: October 30, 2010 In order to work toward safer schools, two reports are required to be
FLORIDA INSTITUTE OF TECHNOLOGY DEPARTMENT OF CHEMISTRY SAFETY MANUAL
FLORIDA INSTITUTE OF TECHNOLOGY DEPARTMENT OF CHEMISTRY SAFETY MANUAL INTRODUCTION Safety is important to all members of the Florida Institute of Technology community. The Florida Tech Department of Chemistry
Hazard Communication Self Inspection Checklist
Name of School: Optional Information Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: Hazard Communication Self Inspection Checklist Guidelines: This checklist covers some of
What is wrong with this picture?
Lab Safety What is wrong with this picture? General Safety Rules 1. Listen to or read instructions carefully before attempting to do anything. 2. Wear safety goggles to protect your eyes from chemicals,
CNS Cleanroom Safety Orientation Form
CNS Cleanroom Safety Orientation Form Please complete this form during the Cleanroom Safety Orientation. Submit the completed, signed form to the CNS Administrative Office (LISE 304, 11 Oxford St, Cambridge,
Table of Contents. Additional Guides for Specific Areas Safety Showers & Eyewashes Spill Kits Building Safety Inspection Reports...
Table of Contents Building Safety Inspection Reports... ii Guides Common to All Areas Egress, Slip, Trip Hazards... 1 Falling Hazards... 2 Good Housekeeping Practices... 3 Emergency Action Guide... 4 Fire
MIT Emergency Response Guide
MIT Emergency Response Guide The MIT Environment, Health and Safety Office Biosafety Environmental Management Industrial Hygiene Radiation Protection Safety 2-EHSS (2-3477) (617-452-3477) http://ehs.mit.edu
John Jay College of Criminal Justice HOT WORK PERMIT STANDARD OPERATING PROCEDURES
John Jay College of Criminal Justice HOT WORK PERMIT STANDARD OPERATING PROCEDURES Last Updated: July 18, 2013 1 TABLE OF CONTENTS A. PURPOSE 3 B. SCOPE 3 C. POLICIES AND PROCEDURES 3 1. Facility Hot Work
MCDB4100: LABORATORY SAFETY GUIDELINES
MCDB4100: LABORATORY SAFETY GUIDELINES Dress code for the lab session Exposed skin is a risk for contact with hazardous materials. For your protection, you must dress properly for each laboratory session.
The Leader In Research and Innovation INSTITUTIONAL BIOSAFETY & BIOSECURITY COMMITTEE (IBBC) UNIVERSITI MALAYA
For IBBC use only Registration no.: Date reeived: The Leader In Researh and Innovation INSTITUTIONAL BIOSAFETY & BIOSECURITY COMMITTEE (IBBC) UNIVERSITI MALAYA BSL 1 SELF-INSPECTION CHECKLIST Instrutions
Safety Checklist for Science Instruction, Preparation and Storage Area
Safety Checklist for Science Instruction, Preparation and Storage Area School: Date: Teacher(s): Room or Area: The Science Center of the Boston Public Schools would like to acknowledge both the Science
Laboratory Inspection Checklist
Laboratory Inspection Checklist Principal Investigator: Lab Representative(s): Permit/Certificate Number(s): Inspector: Inspection Number: Date of Inspection: Room Number(s)/ Lab Designation(s): Inspection
Chemistry Basic Lab-Safety Guidelines
Chemistry Basic Lab-Safety Guidelines The Chemistry Basic Lab Safety Guidelines is aimed to minimize or eliminate hazards in the laboratories of Chemistry Department. Where the scope of hazards is not
Developing Safety Guidelines for Extremely Hazardous Chemicals
Developing Safety Guidelines for Extremely Hazardous Chemicals Purpose: Develop a reference document that can be used by a Principle Investigator or a designee to assist in the development of Safety Operating
INTRODUCTION. Page 1 of 5
INTRODUCTION The Fire Code and Fire Department rules regulating non-production laboratories date back to 1966. The 1966 rule regulated the storage and use of chemicals in college, university, hospital,
HARDWOOD INDUSTRY FACILITY & SAFETY INSPECTION CHECKLIST
Company: Inspection Completed By: Date: Administrative: 1. Written safety rules/safe job procedures in place 2. OSHA log updated/safety posters displayed 3. Management Safety Policy in place 4. All planned
EPISD RISK MANAGEMENT. Custodial Safety
Custodial Safety Custodial Safety The on-going maintenance of school and support facilities require custodians to perform a variety of tasks. These tasks must be performed in a neat, orderly, efficient,
Protocol for Chemical Spills. By Gordon Krueger Environmental Safety Specialist University of Northern Iowa Environmental Health and Safety
Protocol for Chemical Spills By Gordon Krueger Environmental Safety Specialist University of Northern Iowa Environmental Health and Safety Protocol for Chemical Spills Topics include Hazardous Awareness
Safety Scenarios. You enter the lab and discover that you will be boiling water in a beaker and pouring the hot water into a separate container.
Safe Practices and Equipment 1 2 You enter the lab and discover that you will be boiling water in a beaker and pouring the hot water into a separate container. In lab, you are working with liquid chemicals.
TECHNICAL EDUCATION FACILITY SAFETY AUDIT
TECHNICAL EDUCATION FACILITY SAFETY AUDIT PLATTEVILLE HIGH SCHOOL FEBRUARY 3, 2009 PREPARED FOR: PLATTEVILLE SCHOOL DISTRICT 780 NORTH 2 ND STREET PLATTEVILLE, WI 53818 PREPARED BY: ENVIRONMENTAL MANAGEMENT
SEMICONDUCTOR FABRICATION FACILITIES
CHAPTER 18 SEMICONDUCTOR FABRICATION FACILITIES SECTION 1801 GENERAL 1801.1 Scope. Semiconductor fabrication facilities and comparable research and development areas classified as Group H-5 shall comply
MONTHLY SAFETY INSPECTION REPORT
MONTHLY SAFETY INSPECTION REPORT Date of Inspection: Company: Persons Participating in Inspection: POSSIBLE HAZARDS RATE HAZARD NOTES/COMMENTS: Are all parking spots and walkways well lit at night? Are
LABORATORY SAFETY SERIES: Planning For Emergencies
1525 LABORATORY SAFETY SERIES: Planning For Emergencies Leader s Guide Marcom Group Ltd. INTRODUCTION TO THE PROGRAM Structure and Organization Information in this program is presented in a definite order,
Health and Safety Plans Health and Safety Policy Statement Fire Prevention Plan Objective
Health and Safety Plans Health and Safety Policy Statement It is the policy of Prospect College to provide and maintain a safe environment free of injuries and other impairments to the health of the students,
SEMICONDUCTOR FABRICATION FACILITIES
CHAPTER 18 SECTION 1801 GENERAL 1801.1 Scope. Semiconductor fabrication facilities and comparable research and development areas classified as Group H-5 shall comply with this chapter and the International
SEMICONDUCTOR FABRICATION FACILITIES
CHAPTER 18 SEMICONDUCTOR FABRICATION FACILITIES SECTION 1801 GENERAL 1801.1 Scope. Semiconductor fabrication facilities and comparable research and development areas classified as Group H-5 shall comply
Outlines. 1. Introduction of Safety at Laboratories. 2. Emergency Situations. 3. Basic Safety Rules for All the Labs (Engg.
Outlines 1. Introduction of Safety at Laboratories 2. Emergency Situations 3. Basic Safety Rules for All the Labs (Engg. And Science Labs) 4. Safety Rules for Engineering Labs I. Chemical Engineering Lab
WORKPLACE INSPECTION CHECKLIST FOR INDUSTRIAL ENVIRONMENTS
WORKPLACE INSPECTION CHECKLIST FOR INDUSTRIAL ENVIRONMENTS Standard OHS Workplace Inspection Checklist Review Date: Next Review: Inspection Site: Inspection Team: Contacts: Bookcase/Shelves/Cabinets Secured
SEMICONDUCTOR FABRICATION FACILITIES
CHAPTER 18 SEMICONDUCTOR FABRICATION FACILITIES SECTION FC 1801 GENERAL 1801.1 Scope. This chapter shall govern the design, installation, operation and maintenance of semiconductor fabrication facilities
OH&S WORKPLACE ASSESSMENT INSPECTION CHECKLIST
OH&S WORKPLACE ASSESSMENT INSPECTION CHECKLIST Organisational Unit / Workplace: Person undertaking inspection: Date inspected: The findings from workplace inspections and safety audits should be submitted
DEPARTMENTAL SAFETY ISSUES - SAFETY TECHNOLOGIST / INFECTION CONTROL PRACTITIONER
Section: Orientation For Technologists Manual Policy # MI\ORIEN\03\03\v01 Page 1 of 2 Subject Title: Departmental Issues - Technologist/Infection Control Practitioner Issued by: LABORATORY MANAGER Original
LABORATORY SAFETY SERIES: Flammables & Explosives
ERI Safety Videos Videos for Safety Meetings 2953 LABORATORY SAFETY SERIES: Flammables & Explosives Leader s Guide Marcom Group Ltd. INTRODUCTION TO THE PROGRAM Structure and Organization Information in
LABORATORY SAFETY. Discipline of Metallurgy Engineering and Materials Science Indian Institute of Technology (IIT) Indore DECLARATION
LABORATORY SAFETY Discipline of Metallurgy Engineering and Materials Science Indian Institute of Technology (IIT) Indore DECLARATION I declare that I have read the safety guide of Discipline of Metallurgy
Standard Operating Procedure
Standard Operating Procedure Diethyl Ether This SOP is not complete until it has been signed and dated by the PI and relevant lab personnel. Print a copy and insert into your Laboratory Safety Manual and