GUIDANCE GUIDANCE, REFERENCES AND DOCUMENTATION AVAILABLE FOR THOSE CARRYING OUT IN-SERVICE INSPECTION OF LOCAL EXHAUST VENTILATION CONTROL MEASURES.
|
|
|
- Anthony Lawson
- 5 years ago
- Views:
Transcription
1 GUIDANCE GUIDANCE, REFERENCES AND DOCUMENTATION AVAILABLE FOR THOSE CARRYING OUT IN-SERVICE INSPECTION OF LOCAL EXHAUST VENTILATION CONTROL MEASURES. Number: LEVC 02 Prepared by: Approved by: LOCAL EXHAUST VENTILATION (LEV) COMMITTEE TECHNICAL STEERING COMMITTEE Status: Issue 04 Date: 14 th August 2017 Reference: The Control of Substances Hazardous to Health Regulations 2002 (as amended) (COSHH), the Control of Lead at Work Regulations 2002 (CLAW) and the Control of Asbestos Regulations 2012 (CAR) SITUATION: When undertaking LEV inspection and testing as required by COSHH, SAFed member companies will need to have access to a range of appropriate guidance and informative documentation. Such a list of documentation is collated within this Guidance. GUIDANCE: The following documentation is offered to SAFed member companies to aid them in undertaking their responsibilities when undertaking LEV thorough examination and testing. Page 1 of 9
2 Page 2 of 9
3 ACGIH American Conference of Governmental Industrial Hygienists, Inc. WIS Woodworking Information Sheets COP Code Of Practice GG Environmental technical Centre DTI L Code Of Practice (Legal) MDHS Method of Determination of Hazardous Substances HSG Health & Safety Guidance SIR Specialist Inspectors Report AF/HSE Aluminium Federation (ALFED)/HSE PG Environmental Protection Act Process Guidance EH Environmental Hygiene BB Building Bulletin PM Plant & Machinery BS British Standard EIS Engineering Information Sheets pren Provisional European Standard LAC Local Authority Circular INDG Industry guidance ICE Institute of Chemical Engineers MSDS Material Safety Data Sheet CLEAPSS Consortium of Local Education Authorities for the Provision of Science Services SR Service and Retail te 1: COSHH was amended in 2002, 2003 and 2004; CLAW was revised in 2002 and CAR was revised in 2006 te 2: There are many other documents, relating to specific industries, available from the HSE within the COSHH Essentials sections and therefore, the following list is neither exhaustive nor exclusive. Page 3 of 9
4 ACGIH 28 th edition 2013 Industrial Ventilation A manual of recommended practice Reviewed every 2 yrs AF/HSE 1991 Fire & explosion hazards in the grinding & polishing of aluminium & its alloys BS Code of practice for safe operation of lead-acid stationary batteries BS Laboratory fume cupboards Specification for safety and performance PEL/21 Withdrawn - Superseded by BS EN Safety requirements for secondary batteries and battery installations. General safety information LBI/18 Withdrawn - Superceded by BS EN parts 1-4 and part 6 and DD CEN/TS Page 4 of 9
5 BS Laboratory fume cupboards Recommendations for the exchange of information and recommendations for installation BS Laboratory fume cupboards Recommendations for selection, use and maintenance BS Laboratory fume cupboards Method for determination of the containment value of a laboratory fume cupboard LBI/18 Withdrawn - Superceded by BS EN parts 1-4 and part 6 and DD CEN/TS LBI/18 Withdrawn - Superceded by BS EN LBI/18 Withdrawn - Superceded by BS EN parts 1-4 and part 6 and DD CEN/TS BS Specification for recirculatory filtration fume cupboards LBI/18 BS EN Safety of Machinery Reduction of risks to health from hazardous substances emitted by machinery BS EN Safety of Machinery Reduction of risks to health from hazardous substances emitted by machinery BS EN Coating Plants Combined Booths Safety Requirements MCE/3 BS EN Biotechnology Performance criteria for microbiological safety cabinets MCE/3 MCE/3 CII/58 Page 5 of 9
6 Department of Education & Employment BS EN BS EN BS EN : BS EN DD CEN/TS BS EN Building Bulletin Fume Cupboards Vocabulary Replaces: BS :1994;BS :1994;BS : 1994;BS :1994 Replaces tes: Replaces BS Parts 1-4. Related International Documents: EN :2003 IDT Amended By tes: AMD 17039, April Committee LBI/ Fume cupboards. Safety and performance requirements 2003 Fume cupboards Type test methods 2004 Fume cupboards On-site test methods 2006 Fume cupboards Recommendations for installation and maintenance 2006 Fume cupboards Variable air volume fume cupboards 1998 Fume cupboards in schools (Revision of Design te 29) Replaced by CLEAPSS G9 Fume Cupboards in Schools CLEAPSS G Fume Cupboards in Schools Replaces BB 88 Page 6 of 9
7 Department of Environment Department of Environment Department of Environment Department of Trade & Industry PG 6/ Manufacture of Timber & Wood based Products PG 6/ Coating of Metal & Plastic PG 6/34a 2006 Original Coating of Road vehicles and Trailers GG Vapour Degreasing Be Solvent Wise HSE EH Isocyanates: Health hazards & precautionary measures HSE EH Workplace exposure limits~(as consolidated with amendments March 2013) HSE EH Assessment of exposure to fume from welding & allied processes HSE EH55 The control of exposure to fume from welding, brazing and similar processes. HSE EH Grain dust HSE EH Grain dust in maltings (maximum exposure limits) HSE EH72/ Flour Dust Risk Assessment document HSE EIS Control of exposure to triglycidyl isocyanurate (TGIC) in coating powders HSE EIS Isocyanates: Health surveillance in motor vehicle repair Withdrawn HSE EIS Maintenance and cleaning of solvent degreasing tanks Withdrawn Replaced by EIS 47 Page 7 of 9
8 HSE EIS Health and safety in degreasing operations Withdrawn Replaced by EIS 47 HSE EIS Cadmium in silver soldering or brazing HSE EIS Chromate primer paints HSE EIS Solvent vapour degreasing plant Use, maintenance and cleaning HSE HSG Controlling airborne contaminants at work A guide to local exhaust ventilation (LEV) HSE HSG The selection, use and maintenance of respiratory protective equipment HSE HSG Health & safety in motor vehicle repair Withdrawn Replaced by HSG 261 HSE HSG Control of respirable silica dust in heavy clay & refractory processes Withdrawn HSE HSG Control of respirable crystalline silica in quarries Withdrawn HSE HSG Control of silica dust in foundries Withdrawn HSE HSG COSHH and peripatetic workers Withdrawn HSE HSG A step by step guide to COSHH assessment HSE HSG Safe handling of combustible dusts HSE HSG Seven steps to successful substitution of hazardous substances Withdrawn HSE HSG Biological monitoring in the workplace HSE HSG Monitoring strategies for toxic substances HSE HSG The spraying of flammable liquids HSE HSG Control of Diesel Engine Exhaust Emissions in the workplace Page 8 of 9
9 HSE HSG COSHH Essentials Easy steps to control chemicals Withdrawn HSE HSG Controlling exposure to stonemasonry dust HSE HSG General ventilation in the workplace Withdrawn HSE HSG Controlling exposure to coating powders Withdrawn HSE HSG Health & Safety in arc welding Withdrawn HSE HSG Asbestos Essentials HSE HSG 261 HSE INDG 248L 2000 Solder Fume and You HSE INDG 249L 1997 Controlling health risks from rosin (colophony) based solder fumes HSE INDG Safety in isocyanate paint spraying HSE INDG Clearing the air A simple guide to buying and using local exhaust ventilation (LEV) HSE INDG Time to clear the air! A workers pocket guide to local exhaust ventilation (LEV) HSE L Control of Substances Hazardous to Health Regulations 2002 ACOP HSE L Control of Asbestos at Work Regulations 2002 ACOP Withdrawn Replaced by L142 HSE L Control of Substances hazardous to health in the production of pottery HSE L Control of Lead at Work Regulations 2002 ACOP HSE L Managing and working with asbestos Control of Asbestos Regulations 2012 Page 9 of 9
10 HSE MDHS The dust lamp a simple tool for observing the presence of airborne particles HSE SR 02 Diluting Chemical Concentrates Mr D Stewart HSE SR 13 Nail Bars HSE SR 16 Work Involving motor Vehicle Fuels (Diesel, Petrol, LPG) HSE SR 18 Charging Batteries for Electrical powered vehicles HSE SR 20 Soldering: Hand held with lead base, rosin-cured Solders HSE SR 21 Dust from Abrasive Wheels HSE SR 24 Strong Chemical Products (small Scale) HSE SIR 3 Control of exhaust fumes from vehicles working in enclosed spaces HSE SIR 14 Dust control at woodworking processes HSE SIR 20 Spraying & the design of spray booths HSE WIS Wood dust Withdrawn HSE WIS COSHH and the woodworking industries Withdrawn HSE WIS Hardwood dust survey Withdrawn HSE WIS Assessment and control of wood dust Withdrawn HSE WIS Selection of RPE suitable for use with wood dust HSE WIS Health risks during furniture stripping using dichloromethane (DCM) HSE WIS Wood Dust Controlling the Risks HSE WIS LEV Dust capture at sawing machines Withdrawn HSE WIS LEV Dust capture at fixed belt sanding machines Withdrawn HSE WIS LEV Dust capture at fixed drum disc sanding machines Withdrawn Page 10 of 9
11 HSE WIS Occupational hygiene and health surveillance at industrial timber pre-treatment plants HSE WIS Toxic woods HSE WIS Safe collection of woodwaste Withdrawn HSE WIS Health surveillance and wood dust Withdrawn ICE 1987 A user guide to Dust and Fume Page 11 of 9
Respirable Crystalline Silica Exposure Control Plan
1.0 Purpose The purpose of this document is to establish and implement a written exposure control plan that identifies tasks involving silica exposure and methods used to protect employees. University
CHECKLISTS ORGANIZED BY EXPOSURE CATEGORIES (SPECIFIC AGENTS OR HAZARDS; MIXTURES; MULTIMEDIA; OTHER (PROCEDURES, PROGRAMS)
CHECKLISTS ORGANIZED BY EXPOSURE CATEGORIES (SPECIFIC AGENTS OR HAZARDS; MIXTURES; MULTIMEDIA; OTHER (PROCEDURES, PROGRAMS) CHECKLIST TOPIC/TITLE PAGE NUMBERS Biological Agents Blood (Handling and Disposal)
Fume cupboards Standards and ACOP Common to UK Market
Fume cupboards Standards and ACOP Common to UK Market Institute of Local Exhaust Ventilation Engineers Information Day - 17 May 2016 Melvyn Sargent MILEVE Member of LBI/001/01 Laboratory furniture and
REVOLUTIONARY RESPIRATORY PROTECTION CLEANSPACE2 NIOSH APPROVED TC-21C
CLEANSPACE2 NIOSH APPROVED TC-21C-0957 REVOLUTIONARY RESPIRATORY REVOLUTIONARY RESPIRATORY CLEANSPACE2 Powered Respirator HEPA Light, with no hoses, belts or cables and no maintenance. Particulate and
REVOLUTIONARY RESPIRATORY PROTECTION CLEANSPACE2 NIOSH APPROVED TC-21C-0957
CLEANSPACE2 NIOSH APPROVED TC-21C-0957 REVOLUTIONARY RESPIRATORY CLEANSPACE2 REVOLUTIONARY RESPIRATORY Powered Respirator HEPA Light, with no hoses, belts or cables and no maintenance. Particulate and
Spray Painting and Coating
Spray Painting and Coating Disclaimer This training material presents very important information. Your organization must do an evaluation of all exposures, applicable codes and regulations, and establish
Employee Health Protection
Osha Self-Inspection Checklist for General Industry General Is there a copy of the Maryland Occupational Safety and Health Law in your place of business, and is it accessible to all employees? Is the "MOSH
Hazard Communication Self Inspection Checklist
Name of School: Optional Information Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: Hazard Communication Self Inspection Checklist Guidelines: This checklist covers some of
CARE GUIDANCE. Local Exhaust Ventilation (LEV) Systems for High Temperature Insulation Wool (HTIW) LEVEL 2 RECOMMENDATIONS ON BEST PRACTICE
PUBLICATION: MAY 2012 REVISION: JANUARY 2018 VERSION: 1.2 CARE GUIDANCE RECOMMENDATIONS ON BEST PRACTICE LEVEL 2 Local Exhaust Ventilation (LEV) Systems for High Temperature Insulation Wool (HTIW) 2 LOCAL
Chapter 12 HOT WORK OPERATIONS. Purpose:
Chapter 12 Hot Work Operations Chapter 12 HOT WORK OPERATIONS Purpose: To provide written procedures to prevent the outbreak of fire, fire alarm activations, and smoke and odor migration in buildings resulting
Equipment guide for local exhaust ventilation (LEV)
Nederman equipment guide brochure LEV_Layout 1 29/09/2014 13:43 Page 1 Equipment guide for local exhaust ventilation (LEV) Extraction products, systems and solutions available Nederman is one of the world'
Control of Biological Hazards
Health and Safety Services Safety Code of Practice 14 Part 6 Control of Biological Hazards Microbiological Safety Cabinets Office of the University Secretary University of Reading Safety Code of Practice
Safe working with flammable substances
Safe working with flammable substances INTRODUCTION Small quantities of dangerous goods can be found in most workplaces. Whatever they are used for, the storage and use of such goods can pose a serious
or with a higher exposure potential than the processes, types of material, control methods, work
specific process, task, or activity. The data must reflect workplace conditions closely resembling or with a higher exposure potential than the processes, types of material, control methods, work practices,
SUMMARY. On completion of all of the five tests, general body concentrations of ozone gas within the room monitored were less than 0.01 ppm.
SUMMARY The results indicated that the maximum general body concentration of ozone gas during trial operations of the Ozone Clean Limited OC1500 Ozone Generator-Destructor Machine was 2.65 ppm. On completion
BUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY
DOWNDRAFT BENCH SERIES
DOWNDRAFT BENCH SERIES Sentry Air Systems line of Downdraft Benches offers users flexibility, modularity, and durability for the capture and filtration of harmful particles and fume. SERIES INCLUDES INDUSTRIAL
Contractor Safety. Workplace Safety & Environmental Division
Contractor Safety Workplace Safety & Environmental Division Click to edit Master title style This information is designed for tradespersons and persons supervising tradespersons who are performing work
Industrial Ventilation: It s not just Blowing Smoke! Eric Anderson, M.S., P.E.
Industrial Ventilation: It s not just Blowing Smoke! Eric Anderson, M.S., P.E. http://www.eandersonventilation.com InDUSTrial Ventilation It could be called this Abstract Abstract: People have needed smoke
Thorough Examination and Test of Local Exhaust Ventilation Systems to Regulation 9 of the COSHH Regulations 2002 (as amended)
Thorough Examination and Test of Local Exhaust Ventilation Systems to Regulation 9 of the COSHH Regulations 2002 (as amended) Test of LEV Systems Report Ref: LEV25022015 Date: 25 th February 2015 Doncasters
DUST MANAGEMENT PRODUCT GUIDE DURA RANGE
DUST ANAGEENT PRODUCT GUIDE DURA RANGE INTRODUCTION 4 DV-20-LB 8 DV-20-B 9 DV-35-LB 10 DV-35-B 11 DV-35-B SART CLEAN 12 DV-35-AIR 13 DV-80-B 14 DV-120-B 15 DURA RANGE Tough, robust industrial vacuums for
Page 1 of 13 Second Revision No. 1-NFPA 326-2014 [ Section No. 2.3.1 ] 2.3.1 ACGIH Publications. American Conference of Governmental Industrial Hygienists, 1330 Kemper Meadow Drive, Cincinnati, OH 45240-1634.
Quick Reference Guide to Cabinet types
Quick Reference Guide to Cabinet types The following notes are designed as a guide to the different types of cabinets used in Laboratories, Pharmacies, Universities or Industry. They may be used as a guide,
Risk Management Services. Electrical Safety Inspection and Testing. We can show you more.
Risk Management Services Electrical Safety Inspection and Testing We can show you more. Risk Management Services Electricity is a potential hazard that impacts both personal safety and property. Adequate
4. The Whitman College Chemical Hygiene Officer is Fred Miller, Manager, Environmental Health and Safety.
CHEMICAL HYGIENE PLAN 1. In order to meet the requirements set forth at WAC 296-828 for using hazardous chemicals in laboratories all elements of the Whitman College Chemical Hygiene Plan (Plan) is documented
Air Sampling Kits. Celebrating 50 Years of Air Sampling Innovations
Air Sampling Kits Celebrating 50 Years of Air Sampling Innovations T: 01258 480188 SKC Ltd. 11 Sunrise Business Park, Higher Shaftesbury Road, Blandford Forum. Dorset DT11 8ST F: 01258 450968 E: enquiries@skcltd.com
Thorough Examination and Test of Local Exhaust Ventilation Systems to Regulation 9 of the COSHH Regulations 2002 (as amended)
Thorough Examination and Test of Local Exhaust Ventilation Systems to Regulation 9 of the COSHH Regulations 2002 (as amended) Test of LEV Systems Report Ref: LEV24052016 Date: 24 th May 2016 Doncasters
Chapter 18 Welding Table of Contents
Chapter 18 Welding Table of Contents 18.1 Foreword 18.2 Introduction 18.3 Applicability of Standard 18.4 Other Policies that Might Apply 18.5 Approved Areas for Welding and Cutting 18.6 Other Areas 18.7
DUST MANAGEMENT PRODUCT GUIDE DURA RANGE. Issue Date 01.18
DUST MANAGEMENT PRODUCT GUIDE DURA RANGE Issue Date 01.18 DURA INTRODUCTION 4 DV-20-LB 8 DV-20-MB 9 DV-35-LB 10 DV-35-MB 11 DV-35-MB SMART CLEAN 12 DV-35-AIR 13 DV-80-MB 14 DV-120-MB 15 ACCESSORIES 16
7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. The prime activity in this
Sample Safety Inspection Checklist
INSPECTION HEALTH AND CHECKLIST SAFETY COMMITTEES 1 Sample Safety Workplace: Date: Inspected By: Each No answer may indicate a problem. Yes No FLOORS AND WALKWAYS Are walkways and stairways kept clear
Nine Metal Fabrication and Finishing Source Categories 40 Code of Federal Regulations (CFR) Part 63, Subpart XXXXXX (6X NESHAP)
Nine Metal Fabrication and Finishing Source Categories 40 Code of Federal Regulations (CFR) Part 63, Subpart XXXXXX (6X NESHAP) General Summary of Requirements The Nine Metal Fabrication and Finishing
MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATIONS AND OF THE COMPANY UNDERTAKING Product Name Other Trade Names AC-100, AC-250, Potassium Acetate, Class K Product Description Fire Extinguishing Agent Manufacturer/Supplier
Lead Safety for Renovation, Repair, and Painting. Requirements in the EPA RRP Rule:
Requirements in the EPA RRP Rule: The RRP Rule prohibits the use of certain practices. These prohibited practices are discussed in this module. This module also contains recommendations regarding how to
ENVIRONMENTAL ENGINEERS. Dust & Fume Extraction and Water Cooling Engineers. Dust Extraction. Solutions
ENVIRONMENTAL ENGINEERS Dust & Fume Extraction and Water Cooling Engineers Dust Extraction Solutions Wet Collectors - Self Induced Self Induced Wet Collectors Nonflam Self Induced Spray Wet Collector Carter
Sample Safety Inspection Checklist for Schools
INSPECTION Health and CHECKLIST Safety Committees 1 Sample Safety for Schools School: Date: Inspected By: Each No answer may indicate a problem. Floors and Walkways Are walkways and stairways kept clear
CHAPTER 8 OCCUPATIONAL HEALTH AND SAFETY
CHAPTER 8 OCCUPATIONAL HEALTH AND SAFETY 8.1 Health and Safety Aspects Plant operation will involve storage handling and use of fuels and several chemicals. Some of these chemicals may be hazardous in
University of California, Davis Laboratory Self-Inspection Checklist
University of California, Davis Laboratory Self-Inspection Checklist Principal Investigator/Laboratory Supervisor: Laboratories Reviewed: Date: Reviewer: Revised 11/2014 I. SAFETY PROGRAM ADMINISTRATON
POLICY STATEMENT: Policy Number: Section 600 Physical Plant. Date Adopted: May 7, Date(s) Revised: September 4, 2012
Policy Number: 600.8 Policy Title: Subject: Hot Work Program Section 600 Physical Plant Date Adopted: May 7, 2009 Date(s) Revised: September 4, 2012 Approved by: Daniel J. Bingham Dean/CEO Helena College
COMBUSTIBLE DUST SAFETY PROGRAM
COMBUSTIBLE DUST SAFETY PROGRAM PURPOSE This safety awareness program is intended to provide suitable information to Winger Companies, herein referred to as Winger, employees regarding the potential hazards
General Safety Training
General Safety Training May 20, 2015 Outline Purpose Chancellor s Policy Statement Safety Responsibilities General Safety Rules Hazard Communication Reducing Hazard Exposure Fires and Fire Extinguishers
AS/NZS :2016. Refrigerating systems and heat pumps Safety and environmental requirements AS/NZS :2016
Australian/New Zealand Standard AS/NZS 5149.1:2016 (ISO 5149-1:2014, MOD) Incorporating Amendment No. 1 Refrigerating systems and heat pumps Safety and environmental requirements Part 1: Definitions, classification
Use saw equipped with integrated water delivery system that continuously feeds water to the blade.
1926.1153 Respirable crystalline silica. (c) Specified exposure control methods. (1) For each employee engaged in a task identified on Table 1, the employer shall fully and properly implement the engineering
General Safety Training
Environmental Health and Safety General Safety Training Revised February 3, 2017 Outline Purpose Chancellor's Policy Statement Safety Responsibilities General Safety Rules Hazard Communication Reducing
Laboratory Fume Cupboards
Laboratory Fume Cupboards 2006 (d)irene/ /Fumecupboards 4Jun07.doc.doc The University of Hong Kong Safety Office Laboratory Fume Cupboards Table of Content 1. Introduction 2. Components of a Fume Extraction
POSITION PAPER ON WATER MIST FOR FIRE FIGHTING APPLICATIONS
FIRE EXTINGUISHING INSTALLATIONS SECTION POSITION PAPER ON WATER MIST FOR FIRE FIGHTING APPLICATIONS Version 1 29-09-04 0 Eurofeu position paper on water mist for fire fighting applications 1 Scope The
Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44
Allianz Engineering Inspection Services Ltd. Electrical Services. Product Information
Allianz Engineering Inspection Services Ltd Electrical Services Product Information Electrical Testing and Inspection Services The Electricity at Work Regulations (EaWR) states that all electrical systems
This MSDS has been compiled in accordance with - EC Directive 91/155/EC - OSHA's Hazcom Standard (29 CFR )
1. PRODUCT AND COMPANY IDENTIFICATION Product Name Other Trade Names AC-100, AC-250, Potassium Acetate, Class K Manufacturer/Supplier Badger Fire Protection Address 4251 Seminole Trail Charlottesville,
Schedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
21-47 High Street, Feltham, Middlesex, TW13 4UN, UK St laise House Vaughan Street radford West Yorkshire D1 2LL ontact: Mr A R Pullen Tel: +44 (0)1274 738668 Fax: +44 (0)1274 738758 E-Mail: technical@envirocare.org
ARCHIVED. Compliance Document for New Zealand Building Code Clause G4 Ventilation Second Edition. Prepared by the Department of Building and Housing
Compliance Document for New Zealand Building Code Clause G4 Ventilation Second Edition Prepared by the Department of Building and Housing This Compliance Document is prepared by the Department of Building
MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATIONS AND OF THE COMPANY UNDERTAKING Product Name Other Trade Names AC-100, AC-250, Potassium Acetate, Class K Product Description Fire Extinguishing Agent Manufacturer/Supplier
ASBESTOS POLICY. 2. Authority. 3. Scope. 4. Definitions. 4. Responsibilities. 1. Purpose. Department supervisors
1. Purpose ASBESTOS POLICY The purpose of the University of Denver Asbestos Policy is to establish the means to prevent personal asbestos exposures to DU and contractor workers by managing and controlling
MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATIONS AND OF THE COMPANY UNDERTAKING Product Name Other Trade Names Product Description Manufacturer/Supplier Address Regular, Sterated B:C, Sodium Bicarbonate,
Fume Hood Safety TYPES OF FUME HOODS
Fume Hood Safety Fume hoods exhaust toxic, flammable, noxious, or hazardous fumes and vapors by capturing, diluting, and removing these materials. Fume hoods also provide physical protection against fire,
CHEMICAL FUME HOOD PROGRAM
Reed College 3203 Southeast Woodstock Blvd. Portland Oregon 97202-8199 CHEMICAL FUME HOOD PROGRAM Last Reviewed: 3/20/17 I. PURPOSE... 1 II. SCOPE... 1 III. REFERENCES... 2 IV. PROGRAM RESPONSIBILITIES...
General Industry Safety and Health Checklist Guidelines. Building and Premises. Loss Control Bulletin
The purpose of a monthly self-inspection program is to identify unsafe conditions in the work environment and unsafe employee actions. Management can then correct these safety hazards, reducing the potential
A. General Safety LAB/ROOM: INSPECTED BY: DATE:
A. General Safety Item Subject Yes, No, A1 Exits are not obstructed, fastened or locked with keys A2 EXIT signs, if installed are clear and illuminated A3 A4 A5 A6 Fire extinguishers and fire blankets
Fact File 78. Portable Fire Extinguishers under the ADR. Note: This Fact File supersedes Fact File 060 which is withdrawn
Fact File 78 Portable Fire Extinguishers under the ADR Note: This Fact File supersedes Fact File 060 which is withdrawn The European Agreement concerning the International Carriage of Dangerous Goods by
SYNRAD Laser Safety 101
SYNRAD Laser Safety 101 Version 2.1 Released June 2018 SYNRAD is a registered trademark of Novanta Corporation. Novanta Corporation 2018. All Rights Reserved. No reproduction without written authorization.
Material Safety Data Sheet
Material Safety Data Sheet Revision Date: 03/15/2005 Issue date: 03/15/2005 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product type: Epoxy Hardener Company address: Henkel Corporation 1001 Trout Brook
HTIW brand names you may recognize include: In use HTIW:
November 2015 HTIW include: Alkaline Earth Silicate (AES) wools, Refractory Ceramic Fiber (RCF) wools, and Polycrystalline (PCW) wools. High Temperature Insulation Wools Alkaline - Earth - Silicate Wool
SEMINAR ON OCCUPATIONAL SAFETY AND HEALTH IN HONG KONG. James Cheung Chairman IOSH (Hong Kong) 12/3/2009
SEMINAR ON OCCUPATIONAL SAFETY AND HEALTH IN HONG KONG 1 James Cheung Chairman IOSH (Hong Kong) SEMINAR ON OSH IN HONG KONG IOSH (Hong Kong) Development of Workplace Safety Introduction to OSH Legislations
NUCLEAR INDUSTRY STANDARD PROCESS Radiological Protection. Level 3 Information Use. Use and Control of HEPA Filtration and Vacuum Equipment
NUCLEAR INDUSTRY STANDARD PROCESS Radiological Protection Level 3 Information Use Use and Control of HEPA Filtration and Vacuum Equipment NISP-RP-008 Industry Approval Date: October 30, 2018 This is an
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60335-2-69 Edition 3.1 2005-01 Edition 3:2002 consolidated with amendment 1:2004 Household and similar electrical appliances Safety Part 2-69: Particular requirements for wet
Leaders in health, safety & environmental consultancy & training
Leaders in health, safety & environmental consultancy & training Training Courses 2016 Courses Asbestos Legionella Accredited Training Classroom Course elearning Course Asbestos Awareness (Category A)
Department Of Public Works: Internal Operations
Department Of Public Works: Internal Operations A Checklist There are over 800 municipalities in the Michigan Municipal League s Pool and Fund Programs. Most perform public works functions of one type
TfH. Dust Management Report March 2012
Description Page Overview and Background to report 2 Location, Circulation, Equipment List and Method 3 Findings result 1 and 2 plus video links 4 Findings result 3 and 4 plus video links 5 Findings result
SAFETY ACTION NOTICE By arrangement with NSS Health Facilities Scotland
By arrangement with NSS Health Scotland SUMMARY Page 1 of 5 Pages In order to control the risk of fire while maximising the considerable benefits of using alcohol-based handrubs, co-ordinated risk assessments
HeatExchangerSpares.com Ltd HRS Heat Exchangers Ltd HRS Hevac Ltd HRS Hevac Engineering Ltd HRS International Ltd HRS Investments Ltd
HOT WORKS PROCEDURE 1. PURPOSE 1.1 The purpose of this document is to ensure the safe operation of hot work equipment in accordance with the requirements set forth in 29 CFR 1910 Subpart Q - Welding, Cutting
Flexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 63A Issue date 16 th June 2015 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44 (0)1244
ALUMINUM REPAIR CERTIFICATION EQUIPMENT. Eliminate hazardous aluminum dust with a Eurovac system. BODY REPAIR CERTIFICATION EII Wet Mix Dust Collector
ALUMINUM REPAIR CERTIFICATION EQUIPMENT Eliminate hazardous aluminum dust with a Eurovac system BODY REPAIR EQUIPMENT OPTIONS Product Description When repairing an aluminum structured vehicle, it is essential
WORKPLACE SAFETY INSPECTION CHECKLIST
AIR EMISSIONS CHEMICALS COMPRESSED GASES WORKPLACE SAFETY INSPECTION CHECKLIST Are odors, dusts, and emissions from painting, roof repair, and other contaminantproducing activities isolated? Are signs
DUST. Dust is in all workplaces. It not only affects workers lungs, it clogs up. more maintenance and cleaning.
DUST Dust is in all workplaces. It not only affects workers lungs, it clogs up machinery and reduces light, resulting in more maintenance and cleaning. DUST IN A QUARRY TWO WORKERS EXPOSED WHO ARE WEARING
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60312-1 Edition 1.0 2010-09 Vacuum cleaners for household use Part 1: Dry vacuum cleaners Methods for measuring the performance INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE
PPE HAZARD ASSESSMENT CERTIFICATION FORM
PPE HAZARD ASSESSMENT CERTIFICATION FORM Name of Work Place Work Place Address Work Area(s) Assessment Conducted By Date of Assessment Job / Task(s) USE A SEPARATE SHEET FOR EACH JOB, TASK, OR WORK AREA
Introduction. Products conforming with a European Council Directive. CE marked construction products. Other regulations
Introduction This Technical Booklet has been prepared by the Department of the Environment for Northern Ireland and provides for certain methods and standards of building which, if followed, will satisfy
Silica Dust Specified Exposure Control Methods
Silica Dust Specified Exposure When possible and applicable, activities with potential Silica exposure to be consistent with OSHA s Construction Standard Table 1. Supervisors will ensure each employee
Portman Motor Company Bodyshop General Risk Assessment Data Capture Form Date 18/02/2014 Page 1 of 11 Portman Motor Company
Date 18/02/2014 Page 1 of 11 Portman Motor Company ( to ) 1 Hazardous Substances Paint mixing & spraying. Body filling. Sanding & grinding. Use of cleaners, polishers, sealant etc. Welding and burning
RESPIRABLE CRYSTALLINE SILICA PARAGRAPHS (C) THROUGH (J)
1926.1153 RESPIRABLE CRYSTALLINE SILICA PARAGRAPHS (C) THROUGH (J) 1926.1153(c) SPECIFIED EXPOSURE CONTROL METHODS 1926.1153(c)(1) For each employee engaged in a task identified on, the employer shall
Training Standard. Draft
Title Duration Purpose/ Scope Occupational Relevance Candidate Pre-requisites Instruction/ Supervision Delivery Assessment Exothermic Welding in Construction Minimum 1 day of 6 learning hours The purpose
Issued $2.50. DuraPark Type A2LS. Heavy-Duty Drum Brake Assembly. Maintenance Manual MM Supersedes Lucas Catalog No. XDA911 (July 1995)
Issued 06-99 $2.50 DuraPark Type A2LS Heavy-Duty Drum Brake Assembly Maintenance Manual MM-99101 Supersedes Lucas Catalog No. XDA911 (July 1995) Service Notes Service Notes Before You Begin This manual
Leaders in health, safety & environmental consultancy & training
Leaders in health, safety & environmental consultancy & training Training Courses 2016 Courses Accredited Training Classroom Course elearning Course Asbestos Legionella Asbestos Awareness (Category A)
c SAFETY CONSIDERATIONS FOR USING POWDER COATINGS
c SAFETY CONSIDERATIONS FOR USING POWDER COATINGS T his publication contains a partial list of suggested safety precautions that should be observed when using f owder... coatings. Users of these coatings
EMERGENCY PHONE: or (651) (24 hours)
Material Safety Data Sheet Copyright, 2004, 3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1)
MATERIAL SAFETY DATA SHEET
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATIONS AND OF THE COMPANY UNDERTAKING Product Name Other Trade Names Product Description Manufacturer/Supplier Address ABC, Ammonium Phosphate, Monoammonium Phosphate,
Electrical Safety Policy
Operational Owner: Clive Parkinson, Director of Health and Safety Executive Owner: Paul Stephenson, Vice President Human Resources Effective date: Review date: October 2021 Related documents: Health and
SECTION LABORATORY EQUIPMENT CONSTRUCTION STANDARD PART 1: GENERAL Scope of Standard
PART 1: GENERAL 1.01 Scope of Standard A. This standard provides general guidance concerning the specific preferences of the University of Texas at Austin for safety equipment used in or in support of
DUST COLLECTORS. OEM and Industrial Air Handling Specialist Snider Road, Mason, OH Telephone:
OEM and Industrial Air Handling Specialist DUST COLLECTORS 7697 Snider Road, Mason, OH 45040-9135 Telephone: 513-573-0600 Visit us at www.cincinnatifan.com for more information. Cat. No. DC-108 Supersedes
Important Safety Notice
Date: 27 th April 2015 Page 1 of 12 SPI Lasers UK Limited Safety Information High Power OEM Fibre Lasers Important Safety Notice This notice outlines important safety related information and must be read
Section 5.0: HAZARDOUS MATEIRAL STORAGE TABLE OF CONTENTS. A. Regulations, Standards and References 2. B. Scope 3. C. Approvals and Listings 3
Section 5.0: HAZARDOUS MATEIRAL STORAGE TABLE OF CONTENTS A. Regulations, Standards and References 2 B. Scope 3 C. Approvals and Listings 3 D. Design 4 E. Venting Cabinets 4 Page F. General Installation
Microbiological Safety Cabinets
Microbiological Safety Cabinets Microbiological safety cabinets are intended to offer protection to the user and the environment (which will include other people in the laboratory) from the aerosol hazards
1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION 2. COMPOSITION/INFORMATION ON INGREDIENTS
Material Safety Data Sheet Revision Date: 06/07/2006 Issue date: 06/07/2006 Version: 13 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Region: Europe Company Name & Address Henkel Loctite Adhesives Ltd.
NES. What s New June Contents: Detailed Technical guidance. Work section updates. (key points)
Contents: Section 1. Section 2. Section 3. Section 4 SUMMARY DETAIL OF WORK SECTION UPDATES & AUDITS SCHEDULES DETAIL CHANGES TO REFERENCE DOCUMENTS A full record of the content revisions can be obtained
BP MAINTENANCE WORK INSTRUCTIONS FREQUENTLY ASKED QUESTIONS
BP MAINTENANCE WORK INSTRUCTIONS FREQUENTLY ASKED QUESTIONS The following FAQ was last updated 30/3/2016. This material is guidance only. If any of the content contradicts with requirements within the
Engineering and Work Practice Control Methods
Table 1: Specified Exposure Control Methods When Working with Materials Containing Crystalline Silica 0206500_CP_11_25_en_A2.1 Equipment/Task Engineering and Work Practice Control Methods Required Respiratory
DSEAR - Requirements
SDA Technical Services DSEAR - Requirements The Dangerous Substances and Explosive Atmospheres Regulations 2002 - Requirements SDA Technical Services 2010 DSEAR Overview Date Added: March 18, 2010 02:24:04
HEALTH AND SAFETY INDUCTION CHECKLIST
LIST Listed below is a checklist of health & safety matters, some general and some applicable only to certain jobs. page 1 Section A Mandatory for all Staff 1. HEALTH, SAFETY & ENVIRONMENTAL (HSE) POLICIES
Australian/New Zealand Standard
AS/NZS 2243.5 Australian/New Zealand Standard Safety in laboratories Part 5: Non-ionizing radiations Electromagnetic, sound and ultrasound This Joint Australian/New Zealand Standard was prepared by Joint
INDUSTRY WIDE LABOR-MANAGEMENT SAFETY COMMITTEE
INDUSTRY WIDE LABOR-MANAGEMENT SAFETY COMMITTEE SAFETY BULLETIN #39 SAFETY GUIDELINES FOR USING FOAM(ED) PLASTICS IN SET AND PROP CONSTRUCTION The following recommendations are intended to give general