Welcoming Address. Dear Colleagues,

Transcription

1 Welcoming Address Dear Colleagues, Welcome to the 11th Asian Textile Conference (ATC-11) to be held on November 1 to 4, 2011 at Daegu, Korea. ATC is one of the world leading conferences in the textile fields and takes place biannually at Asian countries in turn. The Korean Fiber Society held the successful ATC-2 at Seoul in 1993 and is organizing ATC-11. We are all aware that interdisciplinary technology is the key solution for the growth of the textile industry in the future. The fusion among nanotechnology, biotechnology, information and communication technology, and green technology is the leading trend in the development of fiber and textile fields. Moreover, eco-friendly textile system is the challenging technical area all over the world. Therefore, the organizing committee of ATC-11 has chosen Knowledge Convergence in Textiles for Human and Nature as the main theme of the conference. ATC-11 will be an open forum to highlight the latest research achievements on all aspects related to convergence technology in technical textiles as well as all traditional and contemporary textiles. ATC-11 will provide 5 plenary lectures, 53 invited lectures, 144 general oral presentations and 403 poster presentations from 24 nations. We are sure that ATC-11 will provide all the global scientists and researchers with expectations, directions and goals for the progress of textile science and engineering over the next decade. Furthermore, the conference will give you a special opportunity to visit Daegu, the birthplace of Korean textile industry. During the conference, there will be also many wonderful social events, giving the participants chances to build up a global network for further collaboration and to enjoy the Korean culture. All members of the ATC-11 committee wholeheartedly welcome all of you to the world leading textile conference. Sincerely, 0 Chang Whan Joo Chairman of ATC-11 Organizing Committee Professor, Chungnam National University

2 About ATC-11 FAPTA and ATC [FAPTA] The Federation of Asian Professional Textile Associations (FAPTA) was established in 1991 and is composed of the eight professional textile organizations in Asia. Country Organization Board Member Australia Deakin University Prof. Xungai WANG (Deakin University) China Chinese Taipei Hong Kong India Iran Japan Korea China Textile Engineering Society The Chinese Institute of Textile Engineers Hong Kong Polytechnic University The Textile Association (India) Amirkabir University of Technology The Society of Fiber Science and Technology, Japan The Korean Fiber Society Chair : Prof. Haruma KAWAGUCHI, Kanagawa University, Japan Mr. Gong JINLI (China Textile Engineering Society) Mr. Yin NAIDONG (China Textile Engineering Society) Prof. Wen Hao HSING (Chinese Culture University) Prof. Shin-chuan YAO (National Taipei University of Technology) Prof. Xiao-ming TAO (Hong Kong Polytechnic University) Prof. Yeung Kwok WING (Hong Kong Polytechnic University) Mr. Ashok JUNEJA (The Textile Association (India)) Mr. D. R. MEHTA (The Textile Association (India)) Prof. Seyed Hajir BAHRAMI (Amirkabir University of Technology) Prof. Saeed SHAIKHZADEH NAJAR (Amirkabir University of Technology) Prof. Kanji KAJIWARA (Shinshu University) Prof. Yoshiharu KIMURA (Kyoto Institute of Technology) Prof. Chang Whan JOO (Chungnam National University) Prof. Young Hwan PARK (Seoul National University) Prof. Jae Ryoun YOUN (Seoul National University) [ATC] Asian Textile Conference (ATC) is a sole event of FAPTA and is held in every two years to discuss the latest achievement on textile science and engineering and to build up a global network between Asian textile scientists and engineers. ATC-1 (1991) India ATC-5 (1999) Japan ATC-9 (2007) Chinese Taipei ATC-2 (1993) Korea ATC-6 (2001) Hong Kong ATC-10 (2009) Japan ATC-3 (1995) Hong Kong ATC-7 (2003) India ATC-11 (2011) Korea ATC-4 (1997) Chinese Taipei ATC-8 (2005) Iran Scope of ATC-11 The main theme of ATC-11 is Knowledge Convergence in Textiles for Human and Nature. With the ongoing evolution and expansion of textiles into other research and technological fields, the scope of the ATC-11 includes interdisciplinary topics related to textile as well as all the subjects related to fiber, textile, and polymer science and engineering. Topics of ATC-11 General Topics Special Topics G1. Fiber and Polymer Materials S1. Smart Interactive Textiles and Nanotechnology G2. Textile Processing, Mechanics and Machinery S2. Sustainable Textiles and Biotechnology G3. Dyeing, Finishing, Coating and Laminating S3. Extreme/Protective Textiles G4. Textile Testing, Evaluation and Performance S4. Nonwoven and Technical Textiles G5. Textile Design, Fashion and Clothing Science S5. Advanced Textile Composites and Applications 1

3 Committee 2 [Organizing Committee] Chair : Prof. Chang Whan JOO Chungnam National University, Korea - Mr. Seung Jin BAE Korea Federation of Textile Industries, Korea - Prof. Manwoo HUH Kyungil University, Korea - Prof. Eunae KIM Yonsei University, Korea - Prof. Kap Jin KIM Kyung Hee University, Korea - Prof. Sam Soo KIM Yeungnam University, Korea - Prof. Seungjin KIM Yeungnam University, Korea - Dr. Dae Hoon LEE Korea Institute of Industrial Technology, Korea - Prof. Young Hwan PARK Seoul National University, Korea - Mr. Jong Woo RYU Daegu Metropolitan City, Korea - Prof. Jae Ryoun YOUN Seoul National University, Korea [International Advisory Committee] Chair : Prof. Haruma KAWAGUCHI Kanagawa University, Japan Co-Chair : Prof. Chang Whan JOO Chungnam National University, Korea - Prof. Seyed Hajir BAHRAMI Amirkabir University of Technology, Iran - Prof. Wen Hao HSING Chinese Culture University, Chinese Taipei - Mr. Gong JINLI China Textile Engineering Society, China - Mr. Ashok JUNEJA The Textile Association (India), India - Prof. Kanji KAJIWARA Shinshu University, Japan - Prof. Yoshiharu KIMURA Kyoto Institute of Technology, Japan - Mr. D. R. MEHTA The Textile Association (India), India - Mr. Yin NAIDONG China Textile Engineering Society, China - Prof. Young Hwan PARK Seoul National University, Korea - Prof. Saeed SHAIKHZADEH NAJAR Amirkabir University of Technology, Iran - Prof. Xiao-ming TAO Hong Kong Polytechnic University, Hong Kong - Prof. Xungai WANG Deakin University, Australia - Prof. Yeung Kwok WING Hong Kong Polytechnic University, Hong Kong - Prof. Shin-chuan YAO National Taipei University of Technology, Chinese Taipei - Prof. Jae Ryoun YOUN Seoul National University, Korea [International Scientific Committee] Chair : Prof. Byoung Chul Kim Hanyang University, Korea - Prof. Ki Seo BAE Chungnam National University, Korea - Dr. Chi-Chung BAI Taiwan Textile Research Institute, Chinese Taipei - Prof. Hyun Hok CHO Pusan National University, Korea - Prof. Bin DING Donghua University, China - Prof. Thomas GRIES RWTH Aachen University, Germany - Prof. Kunihiro HAMADA Shinshu University, Japan - Prof. Lubos HES Technical University of Liberec, Czech Republic - Prof. Manfred HEUBERGER Empa, Materials Science and Technology, Switzerland - Prof. David HINKS North Carolina State University, USA - Prof. Toshihiro HIRAI Shinshu University, Japan - Prof. Teruo HORI University of Fukui, Japan - Prof. Jinlian HU Hong Kong Polytechnic University, Hong Kong - Prof. Dong Sun JEE Dankook University, Korea - Prof. Bok Choon KANG Inha University, Korea - Prof. Ramin KHAJAVI Islamic Azad University, South Tehran Branch, Iran - Prof. Han Do KIM Pusan National University, Korea - Prof. Ick Soo KIM Shinshu University, Japan - Prof. Yong K. KIM University of Massachusetts Dartmouth, USA - Prof. Jozef MASAJTIS Technical University of Lodz, Poland - Prof. Majid MONTAZER Amirkabir University of Technology, Iran - Prof. Frankie NG Hong Kong Polytechnic University, Hong Kong - Prof. Pertti NOUSIAINEN Tampere University of Technology, Finland - Prof. Kousaku OHKAWA Shinshu University, Japan - Prof. Satoko OKUBAYASHI Kyoto Institute of Technology, Japan - Dr. Ajit ROY Air Force Research Laboratory, USA - Prof. Tetsuya SATO Kyoto Institute of Technology, Japan - Prof. Gunner SEIDE RWTH Aachen University, Germany - Prof. Abdel-Fatah SEYAM North Carolina State University, USA - Prof. Guowen SONG University of Alberta, Canada - Dr. Tun Fun WAY Industrial Technology Research Institute, Chinese Taipei - Prof. Osamu YAIDA Kyoto Women s University, Japan - Prof. Hidekazu YASUNAGA Kyoto Institute of Technology, Japan - Prof. Rong ZHENG Beijing Institute of Fashion Technology, China [Finance and Exhibition Committee] Chair : Dr. Young Hwan PARK Korea Institute of Industrial Technology, Korea - Dr. Sung Dae CHI Woongjin Chemical, Korea - Prof. Du Hwan CHUN Yeungnam University, Korea - Dr. Kyung-Chan GO Ventex Co., Ltd., Korea - Mr. Won Kyung HA Korea Silk Research Institute, Korea - Mr. Yun Kwang HONG Korea Jacquard Textile Institute, Korea - Dr. Sung Ki JEON The Korean Dyeing Technology Center, Korea - Mr. Hyun Il KIM Korea Apparel Testing & Research Institute, Korea - Mr. Si Min KIM Kolon Industries, Inc., Korea

4 Committee - Dr. Sook Rae KIM Korea High Tech Textile Research Institute, Korea - Mr. Sung Hee KIM Huvis, Korea - Dr. Young Ryul KIM Korea Textile Inspection & Testing Institute, Korea - Mr. Chun Sik LEE Korea Textile Development Institute, Korea - Mr. Dong Soo LEE Daegu Gyeongbuk Textile Industries Association, Korea - Dr. Dae Young LIM Korea Institute of Industrial Technology, Korea - Dr. Chang Woo NAM Korea Institute of Industrial Technology, Korea - Mr. Moon Ok NOH FITI Testing & Research Institute, Korea - Mr. Young Kyu RHEE Welcron Co., Ltd., Korea - Mr. Jeong Koo WOO Korea Research Institute for Fashion Industry, Korea - Mr. Sang Sun WOO Hyosung, Korea - Mr. Joo Young YOON Wooyang Advanced Material Co.,Korea [Scientific Committee] Chair : Prof. Seong Hun KIM Hanyang University, Korea - Prof. Seung Kook AN Pusan National University, Korea - Prof. Doo Hyun BAIK Chungnam National University, Korea - Dr. Sung Won BYUN Korea Institute of Industrial Technology, Korea - Dr. Dae Hyun CHO Korea Textile Development Institute, Korea - Prof. Jae Whan CHO Konkuk University, Korea - Prof. Chang Nam CHOI Chonnam National University, Korea - Prof. Kyung Hi HONG Chungnam National University, Korea - Prof. Jae Yun JAUNG Hanyang University, Korea - Prof. Byung Chul JI Kyungpook National University, Korea - Prof. Hwan Chul KIM Chonbuk National University, Korea - Prof. Joon Ho KIM Yeungnam University, Korea - Prof. Sung Dong KIM Konkuk University, Korea - Prof. Young Ho KIM Soongsil University, Korea - Prof. Kyung Wha OH Chung-Ang University, Korea - Prof. Chung Hee PARK Seoul National University, Korea - Prof. Jong Shin PARK Seoul National University, Korea - Prof. Won Ho PARK Chungnam National University, Korea - Mr. Hwankwon RHO Kolon Fashion Material, Korea - Prof. Hyunjoo SHIM Soongsil University, Korea - Dr. Byung Kap SONG Korea Dyeing Technology Center, Korea - Prof. Ki Won SONG Pusan National University, Korea - Dr. Min Kyu SONG Korea Textile Development Institute, Korea - Prof. Dong Il YOO Chonnam National University, Korea - Prof. Nam Sik YOON Kyungpook National University, Korea - Prof. Ji Ho YOUK Inha University, Korea [Technical Committee] Chair : Prof. Han Yong Jeon Inha University, Korea - Prof. Jin Hyun CHOI Kyungpook National University, Korea - Dr. Yeong Og CHOI Korea Institute of Industrial Technology, Korea - Prof. Yong-Sik CHUNG Chonbuk National University, Korea - Prof. Sung Soo HAN Yeungnam University, Korea - Prof. Jin Ho JANG Kumoh National Institute of Technology, Korea - Prof. Young Gyu JEONG Kumoh National Institute of Technology, Korea - Prof. Myung Seob KHIL Chonbuk National University, Korea - Prof. Han Sung KIM Pusan National University, Korea - Prof. Ho Dong KIM Dankook University, Korea - Prof. Jooyong KIM Soongsil University, Korea - Dr. Juhea KIM Korea Institute of Industrial Technology, Korea - Prof. Seung Hyun KIM Inha University, Korea - Prof. Joon Seok KOH Konkuk University, Korea - Prof. Joon Seok LEE Yeungnam University, Korea - Prof. Jung Jin LEE Dankook University, Korea - Prof. Moo Sung LEE Chonnam National University, Korea - Prof. Seung Goo LEE Chungnam National University, Korea - Prof. Won Seok LYOO Yeungnam University, Korea - Prof. Tae Hwan OH Yeungnam University, Korea - Prof. Jong Seung PARK Dong-A University, Korea - Dr. Sung Mi PARK Kolon Glotech, Korea - Prof. Woong-Ryeol YU Seoul National University, Korea [Secretariat] Secretary General : Prof. Jun Young LEE Sungkyunkwan University, Korea - Prof. Heejoon AHN Hanyang University, Korea - Prof. Jin-Seok BAE Kyungpook National University, Korea - Prof. Hyoung-Joon JIN Inha University, Korea - Prof. Hyungsup KIM Konkuk University, Korea - Prof. Taekyeong KIM Kyungpook National University, Korea - Dr. Hyun-Jin KOO FITI Testing & Research Institute, Korea - Prof. Young-Je KWARK Soongsil University, Korea - Prof. Ki Hoon LEE Seoul National University, Korea 3

5 Meeting Venue ATC-11 will be held at Daegu Exhibition and Convention Center (EXCO, and Hotel Inter-Burgo EXCO ( at Daegu Metropolitan City, which is located in the southeastern part of Korean Peninsula. [Daegu] Daegu has been the center of history, administration, education, and culture of Korea. Especially, Daegu is the birthplace of textile industry in Korea. With the fine transportation network linked in all directions, it is a point leading to numerous cultural heritages and tourist attractions to display Korean culture. Daegu, the 3rd largest city in Korea, also has many distribution complexes, department stores, and large shopping malls, providing ample opportunities for shopping as well. In the central area is the Oriental Medicinal Herb Market where as many as 300 oriental medical clinics, herbal medicinal shop, and herb processing facilities are location. The 202 m-high Daegu Tower at Woobang Towerland commands a nice view of the city. [EXCO] EXCO is a cutting-edge exhibition and convention center, which first opened in April, EXCO as a high-tech IBS (Intelligent Building Systems) prides itself as having the world s best exhibition and convention facilities, and has successfully held numerous international conventions and exhibitions. Strategically located at the center of Daegu Distribution Complex, EXCO provides easy access to the Daegu International Airport, Kyungbu and Daegu railroads, the main highways, and express train station. Floor 1F B1F Facilities Exhibition Hall 1, 2, 3, Post Office, Coffee Shop, Flower Shop, Snack Lounge, ATM Machine Conference Rooms (Geumho, Palgong, B101, B102,103, B ), Parking Lot 6

6 Plenary Lecture 1 Prof. Ian Russell HARDIN Affiliation & address President of the Fiber Society Georgia Power Company Professor of Textile Science, the University of Georgia, USA ihardin@fcs.uga.edu Education B.S. in Textile Science, Auburn University, 1965 M.S. in Textile Engineering, Institute of Textile Technology, 1967 Ph.D. in Chemistry, Clemson University, 1970 PostDoctoral Fellow, Macromolecular Research Institute, University of Michigan, 1971 Experiences & careers West Point-Pepperell Inc. (Shawmut, Alabama) Research Associate, 1966 Auburn University, Department of Consumer Affairs, Assistant & Associate Professor, 1971~1993 Department Head, 1977~1982 The University of Georgia, Department of Textiles, Merchandising and Interiors, Professor and Department Head, Georgia Power Professor of Textile Science, Director of the Academy of the Environment, the University of Georgia, 2011 Vice President of the Fiber Society, 2010 President of the Fiber Society, 2011 Honor & awards 2010 Olney Award from the American Association of Textile Chemists and Colorists Finalist for Auburn University Faculty-Staff Award for Outstanding Service to Minority Students Outstanding Faculty Member in School of Human Sciences, Auburn University, 1991 Award for Distinguished Service, Auburn University Faculty Senate, 1994 Outstanding Alumnus of Samuel Ginn College of Engineering, Auburn University, 2004 Honorary Guest Professor at Donghua University, Shanghai, China, Sep Researches Over ninety research publications, research reports and books; more than $7,000,000 in outside research funding brought in (Auburn and the University of Georgia) Research area : Enzymatic treatment of polymers and fibers, Surface modification of polymers and fibers, Environmental chemistry of textile effluents, International production and trade in textiles and apparel, Eco-polymers and textiles Abstract Biology and Textile Chemistry - How They Have Evolved and Their Organic Relationship to Green Chemistry Ian R. Hardin 1, *, Susan S. Wilson 1, and Juhea Kim 2 1 Textile Sciences, The University of Georgia, Athens, Georgia, USA 2 Korea Institute of Industrial Technology, Cheonan, Korea *ihardin@fcs.uga.edu Biology as a science and textile chemistry both have their origins in the nineteenth century. Figures such as Charles Darwin and Gregor Mendel are prominent in biology, as well as William Perkin in textile chemistry. The latter s synthesis of the synthetic dye led to an explosion of the development of organic chemistry. In the twentieth century, with the discovery of the structure of DNA, the interconnections between biology and organic chemistry became more clear. In recent years, the green chemistry movement has become strong, and in textile research the movement back to biology has become an important trend. This paper describes some of this history, and focuses on research at the University of Georgia that has incorporated the organisms and chemicals of nature to create a more green chemistry approach to both the processing of fibers and textiles, and dealing with environmental cleanups from these processes. 11

7 Plenary Lecture 2 Prof. Tae Jin KANG Affiliation & address Professor, School of Materials Science and Engineering, Seoul National University, 1 Gwanak-ro, Gwanak-gu, Seoul , Korea Phone : , Fax : taekang@snu.ac.kr Education Seoul National University, Textile Engineering, B.S. (1975) Seoul National University, Textile Engineering, M.S. (1979) North Carolina State University, Fiber & Polymer Science, Ph.D. (1983) Experiences & careers 2007~2011: Dean, College of Engineering, Seoul National University 1989~Present: Professor, Department of Materials Science and Engineering, Seoul National University 1985~1988: Associate/Assistant Professor, Department of Fiber and Polymer Science, Seoul National University 2010~Present: Chairman, Fusion Technology Steering Committee, Ministry of Education, Science and Technology 2008~2009: Chairman, Establishment Committee of National Research Foundation of Korea (NRF) 2008~Present: Chairman, Subcommittee on Expanding Growth Engines, Ministry of Knowledge Economy 2007~Present: Chairman, Committee on Engineering Education Innovation, Ministry of Education, Science and Technology : President/Vice President, The Korean Society for Composite Materials 2005~2008: President/Vice President, The Korean Fiber Society 1996~1998: Editor in Chief, Journal of the Korean Fiber Society 1983~1984: Processing Engineer, Macfield Inc., U.S.A. Honor & awards Most Outstanding Graduate Award, North Carolina State University (1983) Academic Award, the Korean Fiber Society (1993) The 7th Leading Scientific & Engineering Papers, The Korean Federation of Science and Technology Societies (1997) The 11th Leading Scientific & Engineering Papers, The Korean Federation of Science and Technology Societies (2001) The Most Excellent Lecturers, College of Engineering, Seoul National University (2004) Distinguished Service Award, the Korean Fiber Society (2008) Academic Achievement Award, Jung-Hun Foundation (2009) Researches Research area : Intelligent Textiles and Composites, Smart Nano-composites, Fibrous Flexible Dye-Sensitized Solar Cells Research activity : Over one hundred and sixty research publications (SCI), research reports and books; over twenty patents; more than $3,000,000 in outside research funding brought in Abstract Current Trends in Smart Interactive Textile Technologies Tae Jin Kang* Director, Intelligent Textile System Research Center Professor, School of Materials Science and Engineering Seoul National University, Seoul , Korea *taekang@snu.ac.kr 12 The aim of this paper is to provide an overview of current trends in technologies for smart interactive textile systems (SITS). Research focus in SITS has gradually shifted from sensing technologies such as in projects like MyHeart and BioTex, towards integration issues such as stretchable electronics (Stella), enhancing the robustness and commercial maturity of integrated systems (PASTA), and further on to power supply needs for autonomous systems. To provide a smart but unobtrusive environment to the user, most wearable electrical circuit devices as well as inter-connections among the sensors, actuators, power source, data processing and communicating device must be textile-based. Moreover, many of the applications of SITS would not be possible without innovations in power supply, such as ultra-low power consumption sensors, power generation through body motion, piezo-electronics and photovoltaic textiles, etc, which ideally, should also be seamlessly integrated as part of the garment.

8 Plenary Lecture 3 Prof. Dominique C. ADOLPHE Affiliation & address Professor, Ecole Nationale supérieure d Ingénieurs Sud Alsace (ENSISA), University of Mulhouse Laboratoire de Physique et Mécanique Textiles EAC CNRS/UHA 7189, ENSISA, 11, rue Alfred Werner - F Mulhouse Cedex, France Phone: Fax: dominique.adolphe@uha.fr Education 1986, University of Mulhouse (France), MSc Electronic, Computer Science, Automation 1990, University of Mulhouse (France), PhD in Science of Engineering 1997, University of Mulhouse (France), HdR in Mechanic Experiences & careers 1990~1991, Assistant Professor, Ecole Nationale Supérieure des Industries Textiles, University of Mulhouse 1991~1999, Associate Professor, Ecole Nationale Supérieure des Industries Textiles, University of Mulhouse 1999~present, Full Professor, Ecole Nationale Supérieure des Industries Textiles (ENSITM) then Ecole Nationale supérieure d Ingénieurs Sud Alsace (ENSISA), University of Mulhouse 1997~2006, Head of the Apparel and Garment Industry Department, ENSITM, University of Mulhouse 2006~2008, Head of Textile & Fibers Department, ENSISA, University of Mulhouse 2001~2008, Representative of ENSITM / ENSISA to AUTEX Association 2006~2008, Representative for the Thematic Expert Group 9 (standardization) in Brussels Jan 2009~Aug 2009 and Jan 2010~Aug 2010, Invited Professor at the University of French Polynesia 2009, Vice President of The Fiber Society 2010, President of The Fiber Society Researches Research area : Nonwoven, Comfort and Tactile Sensory Evaluation of Fabrics and Textile Goods, Functional Textiles and Garments Research activities : 36 Publications in indexed journal, 7 Publications in technical journal, and 2 Chapters of Book. 88 international conferences, 35 poster at international conferences, 21 other conferences, and 30 seminars for University/Industries. Abstract Development of a New Guide for Nerve Repair Made of Nanoweb N. Khenoussi N. 1, B. Clement 2, D. C. Adolphe 1, *, D. Didier Gigmes 2, L. Schacher 1, D. Bertin 2, and T. Trimaille 2 1 Laboratoire de Physique et Mécanique Textile EAC 7189 CNRS/UHA, 11 rue Alfred Werner, Mulhouse Cedex, France 2 Laboratoire Chimie-Provence, UMR CNRS 6264, Université Aix-Marseille I, II, III - CNRS, Av. Escadrille Normandie Niemen, Marseille Cedex 20, France *dominique.adolphe@uha.fr The nerve injuries, that could occur after accidents, is really handicapping for persons, currently, to repair these injuries, depending of the gap between the nerve extremities different solutions can be performed, sutures of the two nerve ends (for small gap), auto graft for longer gap and repair guide for intermediary gap. The classical guides currently used are made of collagen or silicon but present problem in terms of stiffness and inflammation. In order to replace these kind of guide, a research has been carried out, in the frame or an inter laboratories project, to develop such kind of device made of biocompatible polymer and presenting a nano-web structure obtained by electro-spinning. 13

9 Plenary Lecture 4 Prof. Seung Soon IM Affiliation & address Professor, Department of Organic and Nano Engineering, Hanyang Universtiy, KOREA Phone : , Fax : imss007@hanyang.ac.kr Education B.S. Textile Engineering, Hanyang University, Korea, M.S. Organic Material, Tokyo Institute of Technology, Japan, Dr.Sci. Organic Material,Tokyo Institute of Technology, Japan, Experiences & careers Researcher of the Korea Advanced Institute of Science and Technology 1982-present Professor of Dept. of Organic and Nano Eng., Hanyang University Dean of Graduate School of Engineering, Hanyang University Vice president, Dean of Engineering College, Hanyang University Dean of Engineering College, Hanyang University Chief of the Research Institute of Industrial Science, Hanyang University 2003 President of the Korean Fiber Society 2001 Vice-president of the Polymer Society of Korea Honor & awards 1995-present Director, The Polymer Society of Korea 1995-present Expert Committee Member, Industry Cooperative Association of Korea 1992 Chang Young Sil Prize at Korean Science Fundamental Association 1993 Baek Nam Prize for Scientific Research at Hanyang University Prize for International Journal of Science at Hanyang University 1999 Engineering Education Prize at The Korean Society for Engineering Education 2005 Sang Am Polymer Prize at The Polymer Society of Korea 2007 Jung-Hun Fiber Industry Prize at The Jung-Hun Foundation 2008 at The Society of Polymer Science, Japan Researches Research area : Biodegradable Polymers, Intrinsic Conducting Polymers, Polymer Nanocomposites Research activities : Published over 149 papers in several international journals, and over 80 papers in domestic journals, author and coauthor of 3 books: 20 domestic patent licenses. Abstract Conducting Polymer Micro/Nanomaterials and Their Applications Seung Soon Im* and Sang Soo Jeon Department of Organic and Nano Engineering, Hanyang University, Korea *imss007@hanyang.ac.kr 14 Conducting polymer nanomaterials and micromaterials composed of nanosized structures have attracted much attention owing to their unique properties originating from their size, surface, and quantum effect and promising potential applications in plastic electronics. In this study, conducting polymer micro/nanostructures were fabricated by both organic crystal surfaceinduced polymerization method and micro emulsion polymerization technique using a micelle as a nanoreactor. The produced conducting polymer micro/nanostructures possess from 1 dimensional (1D) to 3 dimensional (3D) structures such as, nanorods, nanofibers, hexagonal microplates, lozenge-shaped microplates, ultra-thin flexible nanosheets, and nanospheres. Among them, ultra-thin polypyrrole nanosheets were investigated systematically as a gas sensor for detecting and quantifying toxic gases such as HCl and NH3. In addition, spherical polypyrrole nanoparticles and Pt nanoparticles supported on polypyrrole nanospheres coated on fluorine-doped tin oxide glass allow cost-effective, facile fabrication of counter electrodes for dye-sensitized solar cells, affording an excellent power conversion efficiency.

10 Plenary Lecture 5 Prof. Takeshi KIKUTANI Affiliation & address Professor, Department of Organic and Polymeric Materials, Tokyo Institute of Technology S8-32, O-okayama, Meguro-ku, Tokyo , JAPAN Phone : , Fax : kikutani.t.aa@m.titech.ac.jp Education Bachelor of Engineering, Tokyo Institute of Technology (1977) Master of Engineering, Tokyo Institute of Technology (1979) Doctor of Engineering, Tokyo Institute of Technology (1982) Experiences & careers Assistant Professor, Tokyo Institute of Technology, Visiting Scientist, University of Akron, USA, Associate Professor, Tokyo Institute of Technology, Professor, Tokyo Institute of Technology, Vice President, Society of Fiber Science and Technology, Japan, Vice President, Japan Society of Polymer Processing, , President, Polymer Processing Society, Editor-in-Chief, Sen i Gakkaishi(Journal of the Society of Fiber Science and Technology), Japan, Editor for Asia-Australia, International Polymer Processing, Associate Editor, Fibers and Polymers, 2000~ Honor & awards Japan Society of Polymer Processing, Outstanding Paper Award 2009 Society of Fiber Science and Technology, Japan, Society Award 1999 Japan Society of Polymer Processing, Outstanding Paper Award 1991 Society of Fiber Science and Technology, Japan, Outstanding Paper Award 1988 Society of Fiber Science and Technology, Japan, Sakurada Takeshi Award 1984 Researches Research area : Processing of fibers, films and polymeric materials, Structure and properties of fibers, films and polymeric materials, High-speed fiber spinning Abstract Challenges in the Fiber Processing in the Next Decade Takeshi Kikutani* Department of Organic and Polymeric Materials, Graduate School of Science and Engineering, Tokyo Institute of Technology, Japan *Kikutani.t.aa@m.titech.ac.jp Current trend and future prospects in fiber processing will be discussed introducing various examples of experimental results and innovated products. Development of new materials for fiber processing is one crucial topic, where precise control of chemical structure of existing polymers is an important subject. In this area, modification of polymers needs to be accomplished considering the behavior of macromolecules in the processing conditions. Precise control of stereo regularity is one of such subjects. On the other hand, research trend of fiber processing in the advanced countries is being directed to the development of functionalized and value-added products such as optical and medical devices. One example is the development of fibers with interference color. Development of environmentally friendly products is the issue which should be pursued from various directions. Construction of Light-weight and high-strength products is the urgent subjects of common interests. Progress in the development of high-strength fibers is inevitable in this field, and therefore new concepts for the improvement of mechanical properties need to be pursued. 15

11 T a b l e o f C o n t e n t s Invited Session G1-IN-02 Novel Applications of PVDF-related Polymers 1 Kap Jin Kim 1, *, Dipankar Mandal 1, Sun Yoon 1, Jong Soon Lee 2, Chang Woo Choi 1 and Yu Min Kim 1 1 Department of Advanced Material Engineering for Information & Electronics, College of Engineering, Kyung Hee University, Korea, 2 Analytical Research Center, Central Research Center, Hyosung Corporation, Korea G1-IN-03 Bio-based Polymers as Next-generation Fiber Materials 7 Lee Chan Woo 1, Kazunari Masutani 2 and Yoshiharu Kimura 2, * 1 Department of Innovative Industrial Technology, Hoseo University, Korea, 2 Department of Bio-based Materials Science, Kyoto Institute of Technology, Japan G1-IN-04 Preparation of Cellulose Aerogel using Supercritical Carbon Dioxide 13 Kenichi Nakahara, Anelise Ehrdhardt and Satoko Okubayashi* Graduate School of Science and Technology, Kyoto Institute of Technology, Japan G1-IN-07 Organo-Soluble Poly(para-aramide)s 18 Tae-won Son 1, *, Jong-hwan Kim 2, Ju-Hyun Lee 2, In-sik Han 3 and Jae-young Lee 3 1 School of Textiles, Yeungnam University, Gyeongsan, Korea, 2 Department of Textile Engineering, Yeungnam University, Gyeongsan, Korea, 3 Kolon Central Research Park, Kolon Industries, Inc., Korea G1-IN-09 Highly sensitive protein microarray composed of protein hydrogel 23 Haruma Kawaguchi 1, *, Hiroyuki Tanaka 2, Tatsushi Isojima 2, Minako Hanasaki 2, Hisao Takeuchi 2 and Toshifumi Shiroya 2 1 Department of Science and Technology, Kanagawa University, Japan, 2 Mitsubishi Chemical Group Science and Technology, INC., Japan G1-IN-10 Three Dimensional Scaffolds from Multilobal Fibres for Enhanced Cell Growth 27 Cynthia Wong, Edin Nuhiji, Alessandra Sutti, Graeme Keating, Xin Liu, Mark Kirkland and Xungai Wang 1 Centre for Material and Fibre Innovation, Institute for Technology, Research and Innovation, Deakin University, Geelong Waurn Ponds Campus, Australia G1-IN-11 Development of Carbon Fiber in Industrial Technology Research Institute (ITRI) 31 Tun-Fun Way*, Jong-Pyng Chen, Shu-Jiuan Huang and Kai-Jen Hsiao Material and Chemical Research Laboratories, Industrial Technology Research Institute (ITRI), Taiwan 30011, R.O.C. G1-IN-13 Functional Fibers from Organic-Inorganic Hybrid Using Hydroxyapatite as a Sorbent of Heavy Metal Ions 42 Byung Gil Min 1, *, Xiao Wang 2, Ju Yeon Kim 1 and Jae Ha Park 3 1 Department of Materials Design Engineering, Kumoh National Institute of Technology, Korea, 2 School of Textile and Light Industry, Dalian Polytechnic University, China, 3 Institute of Advanced Composite Materials, Korea Institute of Science and Technology, Korea G2-IN-02 Fundamentals of the Draft Wave from Roller Draft Dynamics 46 Y. Huh 1, * 1 Department of Mechanical, Kyung Hee University, Korea G2-IN-03 Seam Pucker and Formability of the Worsted Fabrics 54 Hyun Ah Kim 1 and Seung Jin Kim 2, * 2 School of Textiles, Yeungnam University, Korea, 1 Korea Institute for Knit Industry, Korea - 1 -

12 G3-IN-01 Electron Beam Irradiation Technique for Fiber and Textile Modifications 62 T. Hori 1, *, K. Hirogaki 1, I. Tabata 1, S. Okubayashi 2 and K. Hisada 1 1 Graduate School of Engineering, University of Fukui, Japan, 2 Graduate School of Science and Engineering, Kyoto Institute of Technology, Japan G3-IN-02 Colour Matters - Colour Evaluation of Textile and Clothing 68 Tetsuya Sato 1, *, Saori Kitaguchi 1, Kanji Kajiwara 1, Kang Koo 2, Samsoo Kim 2, Soonjee Park 2, Josep Valldeperas 3, Manel Lis 3, John Xin 4, Aran Hansuebsai 5 and Jim Nobbs 6 1 The Center for Fiber and Textile Science, Kyoto Institute of Technology, Japan, 2 School of Textiles, Yeungnam University, Korea, 3 INTEXTER, Catalonia Polytechnic University, Spain, 4 Institute of Textiles and Clothing, Hong Kong Polytechnic University, Hong Kong, 5 Department of Imaging and Printing Technology, Chulalongkorn University, Thailand, 6 Department of Colour Science, University of Leeds, U.K. G3-IN-03 Research Topics for Recycle, Inkjet Printing, and Nanofiber Dyeing 72 Kunihiro Hamada* Faculty of Textile Science and Technology, Shinshu University, Japan G3-IN-04 Towards Low Environmental Impact Preparation of Cotton 78 Changhai Xu 1, David Hinks 1, *, Min Li 1, Ahmed El-Shafei 1, Peter Hauser 1, Mary Ankeny 2 and Katelyn Lee 2 1 Department of Textile Engineering, Chemistry and Science, North Carolina State University, USA, 2 Cotton, Incorporated, USA G3-IN-05 Hair Dyeing by Using Dyestuffs Obtained from Biobased Materials 85 YASUNAGA Hidekazu* Kyoto Institute of Technology, Dept. Biobased Materials Sci., Japan G3-IN-06 Removing Black Tea Spot on Cotton Fabric by Doped DMSO with Nanoparticles of TiO 2 91 Ramin Khajavi 1, *, Masoud Talari 1 and Mohammad Esmail Yazdanshenas 2 1 Department of Textile Engineering, Islamic Azad University-South Tehran Branch, Iran, 2 Department of Textile Engineering, Islamic Azad University, Iran G3-IN-07 A Sustainable, Eco-Friendly Alternative Process for Indigo Reduction 98 Younsook Shin 1, *, Kyunghee Son 1, Geun Jung Kim 2 and Dong Il Yoo 3 1 Department of Clothing and Textiles, Chonnam National University, Korea, 2 Department of Biological Science, Chonnam National University, Korea, 3 Department of Polymer and Fiber System Engineering, Chonnam National University, Korea G4-IN-02 Absorption Behavior of Textile Materials 102 Cheol-Jae Hong* Department of Organic Materials and Fiber Engineering, Soongsil University, Korea G4-IN-03 Comparison of Measurement of Thermal Resistance of Fabrics under Different Boundary Conditions 108 M. Matusiak 1, L. Hes 2, *, K. Sikorski 1 1 Textile Research Institute, Lodz, Poland, 2 Technical University of Liberec, Czech Republic G4-IN-04 Fabric Bagging Deformation: Experimental Testing and Modeling 116 Saeed Shaikhzadeh Najar 1, * 1 Department of Textile Engineering, Amirkabir University of Technology, Iran - 2 -

13 T a b l e o f C o n t e n t s G5-IN-01 A Study of Interactive Effect in Interactive Fashion (IF) 124 Frankie M.C. Ng* and Crease W.J. Xia Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hong Kong G5-IN-02 Art of Design -Technical, Technological, Art, Psychological Harmonizing Points 131 Jozef Masajtis Institute of Architecture of Textiles, Technical University of Lodz, Poland G5-IN-03 Development of 3D Anthropometric Mannequins for Chinese Middle School Teenage Girls 138 Ying Wang, Rong Zheng*, Minghai Cui, Haiqiao Huang, Jing Guo and Haijing Liu Aimer Human Engineering Research Centre, Beijing Institute of Fashion Technology, China S1-IN-02 Shape memory polymer fibers for medical textiles 142 Jinlian Hu 1, *, Jing Lu 1, Jianping Han 1 and Yong Zhu 1 1 Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hong Kong S1-IN-04 High-density Tailored Nanofibers on Polymer Films for Omnidirectional Broadband Antireflection 147 Kiwoon Choi, Sung Ho Park and Han Sup Lee* Department of Advanced Fiber Engineering, Inha University, Korea S1-IN-05 Electrospun Nanofibers: Controllable Fabrication and Their Applications 152 Bin Ding 1,2, * 1 State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, China, 2 Nanomaterials Research Center, Modern Textile Institute, Donghua University, China S1-IN-06 Electrospinning of Bio-related Polymers and their Applications 155 Kousaku Ohkawa* Institute of High Polymer Research, Faculty of Textile Science and Technology, Shinshu University, Japan S1-IN-07 Composite Natural Yarn Textiles with Burgeoning Properites 162 Febi Varghese 1, * and C.J. Thampi 2 1 Kerala State Industrial Enterprises Ltd.,Government of Kerala, India, 2 T.M. Natural Resource Research and Development Centre, India S1-IN-09 Direct Spun Pure Carbon Nanotube Yarn - Fabrication, Characteristics, Prospects 165 Stephen C Hawkins 1, *, Chi P Huynh 1,2 and Noman Khandoker 1,3 1 CSIRO Materials Science and Engineering, Australia, 2 Monash University School of Materials Science, Australia, 3 Monash University School of Aerospace Engineering, Australia S1-IN-10 Synthesize of Silver Nanoparticles (NPs) Using Stannous Chloride (SnCl 2.2H 2 O) Stabilized with CTAB for Textile Application 173 Vahid Babaahmadi 1, Majid Montazer 1, *, Mansoureh Ghanbarafjeh 1 and Tayebeh Toliyat 2 1 Department of Textile Engineering, Amirkabir University of Technology, Iran, 2 Department of Pharmaceutics, Faculty of Pharmacy, Tehran University of Medical Sciences, Iran S3-IN-01 Effect of the Thermal Barrier on Thermal Protective Performance of Firefighter Garment 181 Kee Jong Yoon 1, *, Lu Jin 1 and Kyoung-A Hong 1 1 Department of Fibersystem Engineering, Dankook University, Korea - 3 -

14 S3-IN-02 A Way to Determine Comfort and Heat Stress Aspects of Fire Fighter Garments by Means of a Sweating Torso Test Equipment 185 Martin A. Camenzind 3, André Capt 2, Helmut Eichinger 1,2, Agnes Psikuta 3 and René M. Rossi 1,3,* 1 SNV, Swiss Association for Standardization, Switzerland, 2 DuPont Protection Technologies, DuPont International Operations, Switzerland, 3 EMPA - Laboratory for Protection and Physiology, Switzerland S3-IN-03 Intelligent Use of Air Layer for Thermal and Cold Protective Clothing 193 Eunae Kim Department of Clothing and Textiles, Yonsei University, Korea S4-IN-03 Developing PET Recycling Processes to Reduce CO 2 and Improve Product Quality for High-End Use 199 Hyun-Jin Koo 1, *, Seong Hun Kim 2 and Gap-Shik Chang 1 1 Reliability Assessment Center, FITI Testing & Research Institute, Korea, 2 Department of Fiber and Polymer Engineering, Hanyang University, Korea S5-IN-02 3D Woven Composites from Natural Materials 203 Abdel-Fattah M. Seyam 1, *, Matthew L. Laney 1 and Timothy G. Clapp 1 1 College of Textiles NCSU, USA S5-IN-04 Injection Molding of Nanopatterns 212 Sung Ho Kim, Sohee Jeon and Jae Ryoun Youn* Research Institute of Advanced Materials (RIAM) Department of Materials Science and Engineering, Seoul National University, Korea Oral Session G1-OR-01 UV Proactive Layer for High Performance Fibers from Nano-Composite Porous Membrane 220 Ahmed Hassanin 1, Magdi Said 2 and Abdel-Fattah M. Seyam 1, * 1 College of Textiles NCSU, USA, 2 National Aeronautics and Space Administration Wallops Flight Facility, USA G1-OR-02 Synthesis and Structure-Property Studies of High Performance Polyarylates Prepared from p-hydroxybenzoic Acid 227 Youn Eung Lee 1, * and Chang Whan Joo 2 1 Performance materials team, Samsung Fine Chemicals R&D center, Korea, 2 Department of Advanced Organic Materials and Textile System Engineering, Chungnam National University, Korea G1-OR-03 Development of UV Protective Electrospun Layer for PBO 233 Jessica Won 1, * and Abdel-Fattah M. Seyam 1 1 College of Textiles, North Carolina State University, USA G1-OR-07 Particle Embedding Technique for Enhancing Fiber Surface Function 241 Chureerat Prahsarn*, Nanjaporn Roungpaisan and Wattana Klinsukhon National Metal and Materials Technology Center, Thailand G1-OR-08 Wet-spinning of Cellulose from Ionic Liquid Solutions 245 Hideki Yamane 1,2, *, Hideo Tsukada 2 and Lin Lianzhen 3 1 Center for Fiber and Textile Science, Kyoto Institute of Technology, Japan, 2 Graduate School of Science and Technology, Kyoto Institute of Technology, Japan, 3 Nano-materials Research Laboratory, KRI Inc., Japan - 4 -

15 T a b l e o f C o n t e n t s G1-OR-09 Poly(L-lactic acid) and Poly(butylene-succinate-co-adipate) Biodegradable Polymer Blend Fiber 248 Natee Srisawat 1, Sommai Pivsa-Art 1, Sorapong Pavasupree 1, Narongchai O-charoen 1, Weeraporn Pivsa - Art 1 and Natthaphop Suwannamek 2 1 Faculty of Engineering, Rajamangala University of Technology Thanyaburi, Thailand, 2 National Metal and Materials Technology Center, Thailand G1-OR-10 Investigation of Polylactide Reinforced by Natural Fiber and Carbon Nanotube 255 Seong Hun Kim*, Jun Tae Kang and Sang Ho Park Department of Organic and Nano Engineering, Hanyang University, Korea G1-OR-11 Melt-spinning and the Fiber Property of Bio-based Polyamide Jae-Chang Lee 1, Hideki Yamane 2, *, Le Nguyen Xuan Hoa 2, Yoshio Watanabe 2, Norioki Kawasaki 3, Atsuyoshi Nakayama 3 and Sei-ichi Aiba 3 1 Center for Fiber and Textile Science, Kyoto Institute of Technology, Japan, 2 Graduate School of Science and Technology, Kyoto Institute of Technology, Japan, 3 Advanced Industrial Science and Technology, Japan G1-OR-12 Grafting of Acylated Wool Fabrics with Chitosan by Ultrasonic and Investigating of Antifelting Properties 262 Marziyeh Ranjbar Mohammadi 1, *, S. Hajir Bahrami 1 and Mokhtar Arami 1 1 Textile Engineering Department, Amirkabir University of Technology, Iran G1-OR-14 The Application of Chitosan Particles to Composite Wound Dressings 268 Shih-Yu Huang 1, Ching-Wen Lou 1, *, Chao-Tsang Lu 2, Po-Ching Lu 3 and Jia-Horng Lin 3,4 1 Institute of Biomedical Engineering and Material Science, Central Taiwan University of Science and Technology, Taiwan, R.O.C., 2 Institute of Life Sciences, Central Taiwan University of Science and Technology, Taiwan, R.O.C., 3 Laboratory of Fiber Application and Manufacturing, Department of Fiber and Composite Materials, Feng Chia University, Taiwan, R.O.C., 4 School of Chinese Medicine, China Medical University, Taiwan, R.O.C. G1-OR-15 Structural Changes of Liquid Crystalline Fiber Vectran on Annealing Process 272 Hideki HOSHIRO, Ryokei ENDO 1 and Koichiro YONETAKE 2 1 Fibers and Textiles Company, Kuraray co., Ltd., Japan, 2 Department of Science and Engineering, Yamagata University, Japan G1-OR-16 In-situ Analysis of Fiber Structure Development in CO 2 Laser-heated Drawing of Nylon K.H. Kim 1, A. Wakasugi 2, A. Komoriya 2, T. Ikaga 2, Y. Ohkoshi 2, *, I. Wataoka 3, H. Urakawa 3, M. Masuda 4 and Y. Maeda 4 1 Textile & Consumer Goods Examination Division, Korean Intellectual Property Office, Korea, 2 Faculty of Textile Science and Technology, Shinshu University, Japan, 3 Graduate School of Science and Technology, Kyoto Institute of Technology, Japan, 4 Toray Industries, INC, Japan G1-OR-17 Glass Transition Temperature near the Interface between Polymer Thin Film and Substrate as Studied by Neutron Reflectivity 279 Rintaro Inoue 1, *, Kazuko Kawashima 1, Koji Nishida 1, Toshiji Kanaya 1 and Masahiro Hino 2 1 Institute for Chemical Research, Kyoto University, Japan, 2 Research Reactor Institute, Kyoto University, Japan G1-OR-18 A Mathematical Model of Evaluation of Fiber Orientation in Slivers 284 Bohuslav Neckář 1, *, Dipayan Das 2 and S. M. Ishtiaque 2 1 Department of Textile Technology, Technical University of Liberec, Czech Republic, 2 Department of Textile Technology, Indian Institute of Technology Delhi, India - 5 -

16 G1-OR-19 Nano-Chitosan: Synthesis, Characterization and Applications to Cotton Fabric 290 D P Chattopadhyay 1, * and M S Inamdar 2 1 Department of Textile Chemistry, Faculty of Technology & Engineering, The M.S.University of Baroda, India, 2 Faculty of Textile Processing, Sarvajanik College of Engineering &Technology, India, PIN G1-OR-20 Towards a Standardized Way of Evaluating Transmission Performance of Digital Yarn 299 Jae-Jo Lee 1, Gi-Soo Chung 2 and Hee-Cheol Kim 3, * 1 Korea Electrotechnology Research Institute (KERI), Korea, 2 Textile Fusion R&D Dept., Korea Institute of Industrial Technology(KITECH), Korea, 3 School of Computer Engineering/UHRC, Inje University, Korea G1-OR-21 Structure and Properties of Melt Spun PET/CNT Composite Fibers 302 Hye Jin Yoo 1, Kyoung Hou Kim 2 and Jae Whan Cho 1, * 1 Department of Textile Engineering, Konkuk University, Korea, 2 Department of Textile Engineering, Shinshu University, Japan G1-OR-22 Morphology and Structure of Single-walled Carbon Nanotube Bundles, Single Crystals and Composite Fibers 305 Tetsuya Uchida*, Naoya Tsugawa and Takuya Akaishi Graduate School of Natural Science and Technology, Okayama University, Japan G1-OR-23 Temperature Jump Stage and Its Applications 310 Koji Nishida 1, *, Kazuma Okada 1, Harutoshi Asakawa 1, Go Matsuba 1,2, Kazuki Ito 3, Toshiji Kanaya 1 and Keisuke Kaji 1 1 Institute for Chemical Research, Kyoto University, Japan, 2 Department of Polymer Science & Engineering, Graduate School of Science and Engineering, Yamagata University, Japan, 3 RIKEN SPring-8 Center, Harima Institute, The Institute of Physical and Chemical Research (RIKEN), Japan G1-OR-24 Polycarbonate/Vapor Grown Carbon Fiber Composites Prepared by Melt Compounding 312 Shuichi Tanoue 1, *, Jittiwat Nithikarnjanathern 1, Hisai Ueda 1, Hideyuki Uematsu 1 and Yoshiyuki Iemoto 1 1 Graduate School of Engineering, University of Fukui, Japan G1-OR-25 Rheological Properties of Poloxamer 407 Solutions and Gels 317 Eun-Kyoung Park and Ki-Won Song* Department of Organic Material Science and Engineering, Pusan National University, Korea G1-OR-26 Precursor Formation in Shear-induced Crystallization of Polymers above and below Nominal Melting Temperature 322 Ling Jin 1, Inga Polec 1, Cond Deng 1, Yunfeng Zhao 2, Go Matsuba 2, Rintaro Inoue 1, Koji Nishida 1 and Toshiji Kanaya 1, * 1 Institute for Chemical Research, Kyoto University, Japan, 2 Graduate School of Science and Engineering, Yamagata University, Japan G1-OR-27 The Effect of Degumming Ratio on the Solution Properties and Electrospinning of Regenerated Silk 327 Jae Sang Ko 1, Chang Seok Ki 2, Ki Hoon Lee 3, Young Hwan Park 3 and In Chul Um 1,4,* 1 Department of Advanced Organic Material Science and Engineering, Kyungpook National University, Korea, 2 Cosmetics & Personal Care Research Institute, Amorepacific Co., Korea, 3 Department of Biosystems & Biomaterials Science and Engineering, Seoul National University, Korea, 4 Department of Natural Fiber Science, Kyungpook National University, Korea - 6 -

17 T a b l e o f C o n t e n t s G1-OR-28 Fabrication and Structural Characterization of Electrospun Ultrafine Carbon Nanofibers 330 Na Wang 1,2, Jinyou Lin 2, Yang Si 1,2, Bin Ding 1,2, * and Jianyong Yu 2 1 State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, China, 2 Nanomaterials Research Center, Modern Textile Institute, Donghua University, China G1-OR-29 Study on Fiber Formation Behavior of Chemical Recycle Poly(ethylene Terephthalate) in High-Speed Melt Spinning 333 Wan-Gyu Hahm 1, *, Joo-Hwan Yoo 1, Seung Goo Lee 2 and Seong-Hun Kim 3 1 Technical Textile Technology Center, Gyeonggi Technology Application Division, KITECH, Korea, 2 Department of Textile Engineering, Chungnam National University, Korea, 3 Department of Fiber & Polymer Engineering, Hanyang University, Korea G1-OR-31 Compatibilizing Effect of Epoxy Resin on PET/PA6 Blends 336 Jing Zhou 1, Mok Keun Lim 2, Kwang Sang Lee 2, Yeong-Chool Yu 2, Jae Sung Han 3 and Byung Gil Min 1, * 1 Department of Materials Design Engineering, Kumoh National Institute of Technology, Korea, 2 Rhodia Korea, Korea, 3 Korea Textile Development Institute, Korea G1-OR-32 Triblock Copolymer Films as High-Performance Dielectric Elastomers: Effects of Casting Solvents on the Morphology and Electrical Actuation 339 Yeonju Jang 1 and Toshihiro Hirai 1, * 1 Smart Materials Engineering, Faculty of Textile and Technology, Shinshu University, Japan G1-OR-33 A Study of Sensory Impact on Textile Pattern and Colors Design and Consumer Preference 342 Fuling CHANG 1,2 and Shing-Sheng GUAN 3, * 1 Graduate School of Design Doctoral Program, National Yunlin University of Science and Technology, Taiwan, 2 Department of Products, Taiwan Textile Research Institute, Taiwan, 3 Department and Graduate School of Visual Communication Design, National Yunlin University of Science and Technology, Taiwan G1-OR-34 Development of New Polymer Loaded Fibers with Switchable Properties 347 Eun- Sun Min 1, *, Mun-Hong Min 3, Kwang-Pill Lee 2, Anantha Iyengar Gopalan 2, Seok-Han Yoon 3 1 Kyungpook National University, Korea, 2 Department of Chemistry Education, Kyungpook National University, Korea, 3 Korea Dyeing Tech. Center, Korea G1-OR-35 Rheological Characterization of Carbopol Ji-Seok Lee and Ki-Won Song* Department of Organic Material Science and Engineering, Pusan National University, Korea G1-OR-36 Comparisons of the Electrical Resistance between Bundle Electrode and Web from Nano-fibers 354 Jung H. Lim 1 and You Huh 2 1 Department of Textile Engineering, Graduate School, KyungHee University, Korea, 2 Department of Mechanical Engineering, KyungHee University, Korea G1-OR-37 Rheological Investigation of Snail Secretion Filtrate 361 Hye-Jin Ahn and Ki-Won Song* Department of Organic Material Science and Engineering, Pusan National University, Korea - 7 -