Food Grade Range. Your recipe for success

Transcription

1 Food Grade Range Your recipe for success

2 CRC INDUSTRIES NEW ZEALAND On October 6, 1958, a Pennsylvania corporation was formed and was called Corrosion Reaction Consultants, Inc. The company began making and selling CRC Corrosion Inhibitor a multi-purpose corrosion inhibitor/lubricant automotive and electrical trades. In 1973 CRC Chemicals NZ Ltd was formed based in Wellington. In 1974 the New Zealand operation was moved to Auckland and by late 1974 small warehouses were set up in Wellington and Christchurch. CRC Industries has facilities for production, research and customer service in USA, Europe, Asia, Australia and New Zealand and our extensive product range is recognized worldwide as we serve the many segments of the international automotive and industrial markets. CRC Industrial Food Grade products have been developed to conform with the highest standards of relevant food authorities, including NZFSA, NZ AsureQuality and NSF International. CRC Industries follows strict guidelines in all areas of research, development and production, making CRC Food Grade range The Professional s Choice. Whatever your requirements are, CRC has a quality product to meet most maintenance and repair applications. Meeting the needs of customers with high performance products has made CRC Industries New Zealand a leader in the specialty chemical and adhesive industries.

3 BROCHURE

4 CRC Food Grade Range CRC Food Grade Range Catalogue CRC Green Light Programme Overview Food Safety Approval - NZFSA Classifications - AsureQuality - NSF Classifications CRC Product Summary information - Green Light Products - Amber Light Products - Red Light Products CRC Multilube Gel CRC Silicone Mist DISCLAIMER: These documents are accurate at the time of issue.

5 Multilube Gel Hi-Performance Synthetic Non-drip Lubricant CRC Multilube Gel is a unique synthetic penetrating gel specifically formulated to provide a clean, odourless lubricant for high-pressure and high-temperature applications. It contains friction modifiers, anti-wear additives and tacking agents, does not drip off or fling off at high speed and resists hot and cold wash-off for long-lasting protection. It is ideally suited for highly loaded reciprocal moving parts and for general use in heavy industries, workshops, automotive and around the home workshop. Applied as a clear oil with excellent capillary action CRC Multilube Gel penetrates quickly into tight areas before solvents evaporate leaving a waterproof load bearing gel that stays in place and withstands high pressure and shock load conditions. The speedy shift in viscosity provides both, excellent penetration action and premium staying power. Features & Benefits Odourless & clear Does not attract dust Fresh & saltwater proof High pressure & heat resistant Does not drip off Resists hot & cold wash off Penetrating gel High resistance to fling-off at high speeds & temperature, does not drip off overhead application Reduces noise & vibration Resistant against non-concentrated acids/alkalis Does not contain chlorinated solvents Free from silicones, resins & acids - Will not damage rubber, O-rings, painted surfaces Wide temperature range: -35 o C to +300 o C NZFSA Approved C15 NZ AsureQuality assessment for food/beverage/ dairy factory incidental contact Product Details Code Product Description Pack Size 5014 Aerosol 500ml Aerosol 210ml 6 Uses Industrial & Workshops Forklift truck chains, hoists, conveyors (also overhead conveyors), coupling mechanisms, overhead door drive systems. Automotive Door stops on cars, valve stems, sliding rails for venting roofs, sliding doors, car seats, suspension bushings, door lock/window mechanisms, hood shocks, throttle cables, cruise control cables, mechanical linkages. General Hinge mechanisms, tractors and farm equipment, car wash equipment, marine use, special steel screws. CRC Industries NZ, 10 Highbrook Drive, East Tamaki. Phone: Fax:

6 Silicone Mist 100% Lubricating Silicone - Solvent Free CRC Silicone Mist is a dry-type silicone spray formulated with 100% pure food grade silicone oil for light lubrication and mould release. It is applied as a fine dry mist and instantly forms a colourless clear ultra-thin film providing a non-stick surface without oily residue. It does not build up, carry over or soak in and can be used on equipment in operation minimising downtime. CRC Silicone Mist is designed as a release agent and for lubrication of cutting tools and equipment. It eliminates sticking, drag and puckering problems, reduces static electricity, extends tool life and resists dust and dirt build up. It is particularly suited for use in the food, packaging, textile and plastics manufacturing industries where the lubricant comes in contact with surfaces that would be contaminated by wet lubricants. Features & Benefits Creates non-stick surfaces Clear & odourless Resists dust & dirt Adhere tenaclously Temperature effective from -30 o C to 160 o C NZFSA Approved C26 NZ AsureQuality assessment for food/beverage/dairy factory incidental contact. Uses ITextile & appareal applications Cutting operations & machines Cutting tables, sewing needles, knies, cutting blades, conveyors, slides, slicing equipment Foam cutting Ideal for production of packaging including food packaging Mould release Product Details Code Product Description Pack Size 3048 Aerosol 500ml 6 CRC Industries NZ, 10 Highbrook Drive, East Tamaki. Phone: Fax:

7 TDS

8 CRC Technical Data Sheets (TDS) 3003 CRC Food Grade 5.56 Aerosol 400ml 3037 CRC Food Grade Silicone Grease Tube 75ml 3039 CRC Food Grade Silicone Grease Pot 500ml 3038 CRC Food Grade White Grease Aerosol 284g 3043 CRC Food Grade Silicone Aerosol 284g 3042 CRC Food Grade Silicone Can 4 Litre 3041 CRC Food Grade Silicone Can 20 Litre 3048 CRC Silicone Mist 500ml 3065 CRC Food Grade Belt Dressing Aerosol 284g 3086 CRC Food Grade Penetrating Oil Aerosol 312g 3091 CRC Food Grade Chain Lube Aerosol 340g 3092 CRC Food Grade Machine Oil Aerosol 312g 3100 CRC Food Grade White Chain and Drive Lubricant Aerosol 400ml 3101 CRC Food Grade Dry Lube Aerosol 400ml 3102 CRC Food Grade CO Contact Cleaner Aerosol 400ml 3362 CRC Food Grade Synthetic Food Lube Aerosol 400ml 5014 CRC Multilube Gel Aerosol 500ml 5018 CRC Multilube Gel Aerosol 210ml CRC Food Grade Multi-Purpose Grease Cartridge 397g CRC Food Grade Multi-Purpose Grease Pail 18kg CRC Food Grade Anti-Seize Tub 227g DISCLAIMER: All technical data is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industies makes no representations or warranties of any kind concerning this data.

9 CRC Industries NZ Auckland NZ Technical Data Sheet 3003 CRC Food Grade 5.56 I. Product Description CRC Food Grade 5.56 is an effective and efficient multi-use product that penetrates, lubricates and loosens rusted parts, prevents corrosion and displaces moisture. The highly refined white mineral oil forms a thin film that lubricates moving parts for smooth action and silences annoying squeaks and squeals. Superior penetrating power breaks through rust and corrosion, loosens rusted parts, displaces water from wet equipment and cleans away scale and dirt. It protects metals from corrosion caused by humidity and other corrosive atmospheres. Temperature range -20 to +150 C (continuous), +170 C (intermittent). NZFSA Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. II. Features & Benefits Lubricates moving parts for smooth action Silences annoying squeaks and squeals Penetrates quickly Breaks away rust and corrosion, frees components bonded by dirt and scale Eliminates the need for many disassembly operations Leaves protective thin film that clings to surfaces Ongoing protection against corrosion Displaces moisture to help start wet engines Cleans & protects surfaces Non silicone Will not harm paint, plastic or wood surfaces. Easier clean-up and removal of excess oil. Allows treated surfaces to be repainted. 360 C degree valve Aerosol can be sprayed from any position even upside down Non-toxic, colourless, odourless, tasteless Temperature Range Effective from -20 C to +150 C (continuous), +170 C (intermittent) NZFSA Approved C15 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact III. Application and Directions Preparation: 1. Do not use on energized systems. Application: 1. Hold can 200mm to 300mm away from surface to be sprayed. 2. Spray a light, even film on area to be lubricated. 3. Wipe off excess with cloth. 4. Repeat application when necessary IV. Typical Properties and Characteristics Physical Properties: Flash Point 45ºC (TCC) Boiling Point 200ºC Initial Odour None Appearance Colourless liquid Vapor Density > air Solubility Neg. in water Specific Gravity Viscosity ºC Propellant Carbon Dioxide

10 CRC Industries NZ Auckland NZ Technical Data Sheet 3003 CRC Food Grade 5.56 Performance Characteristics: Type of film Dry Time Temperature Range Thin, oily film Non-drying wet oil -20ºC to +150ºC (continuous), +170ºC (intermittent) V. Package Description Part Number Size ml Aerosol VI. Special Precautions General: Extremely flammable aerosol. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Use with adequate ventilation. Store in a cool, well-ventilated area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. Aerosol Cans: Do not puncture, incinerate or store above 50 C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock. First Aid: Swallowed Not considered a normal route of entry. Skin Remove contaminated clothing and wash skin thoroughly with soap and water. Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Wash contaminated clothing before reuse. Eyes Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Inhaled Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 06/2011 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

11 CRC Industries NZ Auckland NZ Technical Data Sheet 3037 CRC Food Grade Silicone Grease I. Product Description CRC Food Grade Silicone Grease is a thin non-curing silicone grease designed for sealing, lubricating and waterproofing o-rings and other rubber and plastic parts used in food processing equipment. It insulates valves, electrical contacts, spark plugs, battery terminals and fasteners from moisture and protects against corrosion. It is resistant to oil, water and chemicals and will not harden, freeze, dry or melt. Wide Temperature Range from -40 C to +200 C. NZFSA Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. II. Features & Benefits Seals, lubricates, protects, insulates and waterproofs Temperature resistant Maintains performance level year round. Will not harden, freeze, dry or melt due to temperature fluctuations. Safe on most rubber and plastics Will not degrade seals, gaskets or plastic insulators Chemical, oil and water resistant Non-toxic, odourless, tasteless Wide Temperature Range Effective from -40 C to +200 C NZFSA Approved C15 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact III. Application and Directions Preparation: 1. Shut off power supply, be sure all power is drained from system and allow hot surfaces to cool before using this product. 2. Clean surfaces, connectors, and/or contacts with CRC Food Grade CO Contact Cleaner. Application: Apply liberally as required. Note: Not suitable for use with hydraulic brake cylinder pads. Do not use for LPG, LNG, compressed oxygen, chlorine or air systems. IV. Typical Properties and Characteristics Flash Point > +300 C Odour Nil Appearance Opaque white paste Solubility Neg. in water % Volatile 0 Specific Gravity 1.06 Temperature Range -40 C to +200 C

12 CRC Industries NZ Auckland NZ Technical Data Sheet 3037 CRC Food Grade Silicone Grease V. Package Description Part Number Size ml Tube ml Pot VI. Special Precautions General: Store in cool, dry, protected area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. First Aid: Swallowed Rinse mouth with water. Skin Wash with water and soap. Eyes Wash with running water. Inhaled Remove to fresh air. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 10/2011 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

13 CRC Industries NZ Auckland NZ Technical Data Sheet 3038 CRC Food Grade White Grease I. Product Description CRC Food Grade White Grease is a high purity, high quality synthetic grease with an advanced additive package that provides superior lubrication, durability, corrosion protection, film strength and excellent water and heat resistance. Convenient aerosol application allows for lubricating hard-to-reach areas. This versatile grease is designed for high load applications requiring a long grease life and is ideal for heavy-duty metal-to-metal lubrication. Wide Temperature Range from -17 C to +230 C. NZFSA Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. NSF H1 Registered for incidental food contact. II. Features & Benefits Excellent adhesion Resists throw-off and wash-out, forms an effective corrosion barrier Aerosol Easy application, ideal for hard-to-reach areas, no clean-up. Can be build up with several layers for improved waterproofing. White Coloration Easy visual film check 360 C degree valve Aerosol can be sprayed from any position even upside down Non-toxic, mild odourless, tasteless Wide Temperature Range Effective from -17 C to +230 C NZFSA Approved C15 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact NSF H1 Registered for incidental food contact III. Application and Directions 1. Shake can well before use. 2. Spray in light even coats. 3. Use extension tube for hard to reach areas. IV. Typical Properties and Characteristics Physical Properties: Flash Point None Appearance Off white grease Odour Slight odour Solubility Slight in H2O NLGI Grade 2 Specific Gravity 0.90 Propellant Hydrocarbon Vapour Density >air

14 CRC Industries NZ Auckland NZ Technical Data Sheet 3038 CRC Food Grade White Grease Performance Characteristics: Drop Point (ASTM D-2268) 250 C Timken OK Load (ASTM D2268) 30 lbs Viscosity-Base 100oF SUS 600 Viscosity-Base 210OF SUS 69 Four Ball EP Weld (ASTM D 2596) 400 kg F Operating Temperature Range -17 C to +230 C V. Package Description Part Number Size g Aerosol VI. Special Precautions General: Use with adequate ventilation. Store in a cool, well-ventilated area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. Aerosol Cans: Do not puncture, incinerate or store above 50 C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock. First Aid: Swallowed Not considered a normal route of entry. Skin Remove contaminated clothing and wash skin thoroughly with soap and water. Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Wash contaminated clothing before reuse. Eyes Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Inhaled Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 05/2011 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

15 CRC Industries NZ Auckland NZ Technical Data Sheet 3043 CRC Food Grade Silicone I. Product Description CRC Food Grade Silicone is a multi-purpose dry film silicone spray for use on food processing and handling equipment. It forms a colourless, odourless film that does not attract dust and product debris. It lubricates and protects in most metal and non-metal applications without damaging treated surfaces or leaving marks or stains. It eliminates binding and sticking and is an excellent release and parting agent. Temperature Range from -40 C to +200 C. NZFSA Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. NSF H1 Registered for incidental food contact. II. Features & Benefits Dry film Does not attract dust and product debris Excellent release and parting agent Ideal to streamline processes on food sorting and handling lines, products will not stick to treated surfaces General lubricant for all surfaces Metals, plastics, rubber, adhesives, wood, fabrics, glass, inks and paints Resists Moisture Stays in place in damp environments 360 C degree valve Aerosol can be sprayed from any position even upside down Non-toxic, colourless, odourless, tasteless Wide Temperature range Effective from -40 C to +200 C NZFSA Approved C15 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact NSF H1 Registered for incidental food contact III. Application and Directions Preparation: 1. Do not use on energized systems. Application: 1. Spray light, even film on areas requiring lubrication or protection. 2. Use extension tube for hard-to-reach areas. 3. Repeat application if necessary. IV. Typical Properties and Characteristics Physical Properties: Flash Point -5 C Boiling Point 60 C Initial Odour Petroleum like Appearance Clear, water-like liquid Solubility Neg. in water % Volatile 97% Vapor Density >air Specific Gravity Propellant Hydrocarbon

16 CRC Industries NZ Auckland NZ Technical Data Sheet 3043 CRC Food Grade Silicone Performance Characteristics: Type of film Temperature Range Dielectric Strength (ASTM D-877) Clear, non-drying -40 C to +200 C 350 volts/mil V. Package Description Part Number Size g Aerosol litre Pack litre Jerry Can VI. Special Precautions General: Extremely flammable aerosol. Keep away from naked flames, electrical appliances/lights, lighted cigarettes, etc. Use with adequate ventilation. Store in a cool, well-ventilated area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. Refer to Material Safety Data Sheet for more details. Aerosol Cans: Do not puncture, incinerate or store above 50 C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock. First Aid: Swallowed Do NOT give milk or oil. Do NOT give alcohol. Skin Remove contaminated clothing and wash skin thoroughly with soap and water. Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Wash contaminated clothing before reuse. Eyes Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Inhaled Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 05/2011 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

17 CRC Industries NZ, Auckland NZ Technical Data Sheet 3048 CRC Silicone Mist I. Product Description CRC Silicone Mist is a dry-type silicone spray formulated with 100% pure food grade silicone oil for light lubrication and mould release. It is applied as a fine dry mist and instantly forms a colourless clear ultra-thin film providing a non-stick surface without oily residue. It does not build up, carry over or soak in and can be used on equipment in operation minimising downtime. CRC Silicone Mist is designed as a release agent and for lubrication of cutting tools and equipment. It eliminates sticking, drag and puckering problems, reduces static electricity, extends tool life and resists dust and dirt build up. It is particularly suited for use in the food, packaging, textile and plastics manufacturing industries where the lubricant comes in contact with surfaces that would be contaminated by wet lubricants. NZFSA Approved C26. Temperature range from -30 C to +160 C. II. Application and Directions 1. Shake can well before using. 2. Spray a light even coating. 3. Use minimum amount necessary. 4. Wipe the treated area to ensure no free CRC Silicone Mist can be transferred. III. Features & Benefits Creates non-stick surface Eliminates drag, sticking and puckering. Materials can easily pass through cutting and sewing operations. Clear & odourless Pure food grade silicone. No solvents. No bulking agents. Does not transfer, non-staining Ultra-thin film that does not transfer to garments and materials. Does not soak in or build up. No excessive oily residue. Resists dust & dirt Leaves surfaces non-sticking and water-repellent. Adheres tenaciously Does not run, drip or wash off. Fast drying, instant lubrication No waiting time, spray on while in operation, effective instantly. Will not damage fabrics, leather, rubber, plastics Will not melt, freeze or gum Non-toxic Temperature Range Effective from -30 C to +160 C. NZFSA Approved C26 NZ AsureQuality assessment for food/beverage/dairy factory incidental contact. IV. Typical Properties and Characteristics Physical Properties: Appearance Odour Flammability Aerosol Flammability residual film Propellant Colourless clear film Practically odourless Flammable Non-flammable Hydrocarbon Performance Characteristics: Surface Tension 0.21 n/m Oxidation Threshold 204 C Temperature Range -30 C to +160 C

18 CRC Industries NZ, Auckland NZ Technical Data Sheet 3048 CRC Silicone Mist V. Package Description Part Number Size ml Aerosol VI. Special Precautions General: Extremely flammable aerosol. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Do not spray on an open flame or other ignition source. Avoid breathing dust/fume/gas/mist/vapours/spray. Wash... thoroughly after handling. Use only outdoors or in a well- ventilated area. Wear protective gloves/protective clothing/eye protection/face protection. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. Aerosol Cans: Do not puncture, incinerate or store above 50 C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock. First Aid: Swallowed Not considered a normal route of entry. Skin Flush skin and hair with running water (and soap if available). Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Eyes Immediately hold the eyelids apart and flush the eye with fresh running water. Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Seek medical attention without delay; if pain persists or recurs seek medical attention. Inhalation Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 03/2013 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

19 CRC Industries NZ Auckland NZ Technical Data Sheet 3065 CRC Food Grade Belt Dressing I. Product Description CRC Food Grade Belt Dressing is a synthetic formulation specifically developed to meet the demand for a true food grade belt dressing. It adheres strongly to any commonly used belt material and forms a tacky, non-drying, water resistant film. Extends belt life by improving traction and reducing belt tension, slipping and dirt or product debris build-up. Annoying squeaks and squeals will be eliminated and stress on motors, shafts and wheels will be relieved for improved operating efficiency. Temperature range from -20 C to +176 C (continuous), +200 C (intermittent). NZFSA Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. NSF H1 Registered for incidental food contact. II. Features & Benefits Strong adhesive qualities Minimises drive belt slippage, maintains belt flexibility and prevents loads from slipping on conveyor systems Extends belt life Belts remain pliable and will not glaze or harden Improves operating efficiency Relieves stress on motors, shafts and wheels Non-drying, water-resistant film Resists water wash off Silences squeaking noises Suitable for most belts and material Flat, round, V belts. Leather, rubber, canvas, fabric. Not suitable for multi-v-belts Colourless Will not stain finished goods transported on conveyor systems 360 C degree valve Aerosol can be sprayed from any position even upside down Non-toxic, odourless, tasteless Wide Temperature Range Effective from -20 C to +176 C (continuous), +200 C (intermittent) NZFSA Approved C15 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact NSF H1 Registered for incidental food contact III. Application and Directions 1. Turn off equipment and stop belts before applying. 2. Spray a light, even coating on each side of belts in contact with pulleys. Use sparingly. 3. Re-apply periodically to help extend belt and pulley bearing life. 4. Do not apply while equipment is energized. IV. Typical Properties and Characteristics Physical Properties: Flash Point < 17 C Odour Solvent Appearance Light amber liquid Vapor Density > air Specific Gravity Propellant Hydrocarbon

20 CRC Industries NZ Auckland NZ Technical Data Sheet 3065 CRC Food Grade Belt Dressing Performance Characteristics: Type of film Dry Time Temperature Range Tacky, colourless, non-drying Non-drying -20 C to +176 C (continuous), +200 C (intermittent). V. Package Description Part Number Size g Aerosol VI. Special Precautions General: Extremely flammable aerosol. Keep away from sources of ignition. No smoking. Use with adequate ventilation. Store in a cool, well-ventilated area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. Aerosol Cans: Do not puncture, incinerate or store above 50 C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock. First Aid: Swallowed Not considered a normal route of entry. Skin Remove contaminated clothing and wash skin thoroughly with soap and water. Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Wash contaminated clothing before reuse. Eyes Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Inhaled Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 05/2011 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

21 CRC Industries NZ Auckland NZ Technical Data Sheet 3086 CRC Food Grade Penetrating Oil I. Product Description CRC Food Grade Penetrating Oil is an industrial strength, low viscosity penetrant designed to quickly loosen and free seized, bound or frozen fasteners on all food processing equipment. The low surface tension formula creeps into cracks, seams, threads and joints with great efficiency and loosens rusted and corroded nuts, bolts, couplings, fittings, hinges and frozen components. Eases the disassembly of plant machinery, tools and equipment for routine maintenance and emergency repairs and leaves a thin non-drying colourless film with outstanding lubrication and corrosion inhibiting properties. Safe on most painted surfaces, coatings, plastics and rubbers. Temperature range from -20 C to +150 C (continuous), +170 C (intermittent). NZFSA Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. NSF H1 Registered for incidental food contact. II. Features & Benefits Eases disassembly of mechancial equipment Low surface tension formula creeps into cracks, seams, threads and joints with great efficiency Improves Performance and Operating Efficiency Loosens rusted and corroded nuts, bolts, couplings, fittings, hinges and frozen components Corrosion inhibiting Lubricating residue prevents further corrosion Non silicone Will not harm paint, plastic or wood surfaces. Easier clean-up and removal of excess oil. Allows treated surfaces to be repainted High Flash Point Provides increased user safety 360 C degree valve Aerosol can be sprayed from any position even upside down Non-toxic, colourless, odourless, tasteless Temperature Range Effective from -20 C to +150 C (continuous), +170 C (intermittent) NZFSA Approved C15 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact NSF H1 Registered for incidental food contact III. Application and Directions 1. Do not use on energized systems. 2. Hold can 200mm to 300mm away from surface to be sprayed. 3. Spray a light, even film on area to be lubricated. 4. Wipe off excess with cloth. 5. Repeat application when necessary IV. Typical Properties and Characteristics Physical Properties: Flash Point >+90 C (TCC) Boiling Point +215 C Initial Odour None Appearance Colourless liquid Vapor Density > air Solubility Neg. in water % Volatile 65% Specific Gravity Viscosity C Propellant Carbon Dioxide

22 CRC Industries NZ Auckland NZ Technical Data Sheet 3086 CRC Food Grade Penetrating Oil Performance Characteristics: Type of film Dry Time Temperature Range Thin, oily film Non-drying wet oil -20 C to +150 C (continuous), +170 C (intermittent) V. Package Description Part Number Size g Aerosol VI. Special Precautions General: Use with adequate ventilation. Store in a cool, well-ventilated area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. Aerosol Cans: Do not puncture, incinerate or store above 50 C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock. First Aid: Swallowed Not considered a normal route of entry. Skin Remove contaminated clothing and wash skin thoroughly with soap and water. Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Wash contaminated clothing before reuse. Eyes Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Inhaled Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 05/2011 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

23 CRC Industries NZ Auckland NZ Technical Data Sheet 3091 CRC Food Grade Chain Lube I. Product Description CRC Food Grade Chain Lube is a special blend of mineral oil and synthetic additives, designed to keep roller drive and conveyor chains lubricated. Foaming action provides outstanding penetration and creeps deep between wire strands, chain links, pins, rollers and sprockets. As the foam subsides it leaves a lubricating non-drying film that remains in place and resists washoff and sling-off. Specifically designed to provide the convenience of aerosol application where incidental food contact may occur. Regular use will help inhibit corrosion, reduce load stress and greatly extend chain life. Temperature Range from -20 C to +150 C (continuous), +170 C (intermittent). NZFSA Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. NSF H1 Registered for incidental food contact. II. Features & Benefits Foaming action For outstanding penetration and coverage. No messy overspray. Penetrates, lubricates, protects Low viscosity formula creeps deep between wire strands, chain links, pins, rollers and sprockets Reduces friction and wear Reduces load stress Corrosion protection Lengthens chain and sprocket life For effective lubrication of all types of chain and conveyor systems Particularly where incidental food contact may occur Silicone free Will not harm paint, plastic or wood surfaces. Easier clean-up and removal of excess oil. Allows treated surfaces to be repainted. 360 C degree valve Aerosol can be sprayed from any position even upside down Non-toxic, odourless, tasteless Temperature Range Effective from -20 C to +150 C (continuous), +170 C (intermittent) NZFSA Approved C15 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact NSF H1 Registered for incidental food contact III. Application and Directions 1. Apply by spraying an even film at each bushing. 2. Wipe off any excess. 3. Repeat application when necessary. 4. Only use the necessary amount to achieve desired results. IV. Typical Properties and Characteristics Physical Properties: Flash Point > 300 C Appearance Light amber clear liquid Odour Mild Solubility Not in Water Volatile 0 Specific Gravity Propellant Hydrocarbon

24 CRC Industries NZ Auckland NZ Technical Data Sheet 3091 CRC Food Grade Chain Lube Performance Characteristics: Type of film Dry Time Temperature Range Non-drying Non-drying -20 C to +150 C (continuous), +170 C (intermittent) V. Package Description Part Number Size g Aerosol VI. Special Precautions General: Use with adequate ventilation. Store in a cool, well-ventilated area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. Aerosol Cans: Do not puncture, incinerate or store above 50 C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock. First Aid: Swallowed Not normally a hazard due to the physical form of product. Skin Remove contaminated clothing and wash skin thoroughly with soap and water. Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Wash contaminated clothing before reuse. Eyes Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Inhaled Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 05/2011 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

25 CRC Industries NZ Auckland NZ Technical Data Sheet 3092 CRC Food Grade Machine Oil I. Product Description CRC Food Grade Machine Oil is a highly refined machine oil engineered to provide exceptional lubrication characteristics and high levels of wear and corrosion protection. For use in circulation systems lubricating gears and bearings on all food processing equipment. Temperature range from -20 C to +150 C (continuous), +170 C (intermittent). NZFSA Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. NSF H1 Registered for incidental food contact. Meets FDA Regulations 21 CFR ; 21 CFR ; and 21 CFR for incidental food contact. II. Features & Benefits Excellent wear protection Improved gear and bearing performance Ongoing protection against corrosion Non silicone Will not harm paint, plastic or wood surfaces. Easier clean-up and removal of excess oil. Allows treated surfaces to be repainted High Flash Point Provides increased user safety 360 C degree valve Aerosol can be sprayed from any position even upside down Non-toxic, colourless, odourless, tasteless Temperature Range Effective from -20 C to +150 C (continuous), +170 C (intermittent) NZFSA Approved C15 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact NSF H1 Registered for incidental food contact Meets FDA Regulations 21 CFR ; 21 CFR ; and 21 CFR for incidental food contact III. Application and Directions Preparation: 1. Do not use on energized systems. Application: 1. Hold can 200mm to 300mm away from surface to be sprayed. 2. Spray a light, even film on area to be lubricated. 3. Wipe off excess with cloth. 4. Repeat application when necessary IV. Typical Properties and Characteristics Physical Properties: Flash Point >190 C (TCC) Boiling Point +215 C Initial Odour None Appearance Colourless liquid Vapor Density > air Solubility Neg. in water % Volatile 65% Specific Gravity Viscosity C Propellant Carbon Dioxide

26 CRC Industries NZ Auckland NZ Technical Data Sheet 3092 CRC Food Grade Machine Oil Performance Characteristics: Type of film Dry Time Temperature Range Thin, oily film Non-drying wet oil -20 C to +150 C (continuous), +170 C (intermittent) V. Package Description Part Number Size g Aerosol VI. Special Precautions General: Use with adequate ventilation. Store in a cool, well-ventilated area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. Aerosol Cans: Do not puncture, incinerate or store above 50 C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock. First Aid: Swallowed Not considered a normal route of entry. Skin Remove contaminated clothing and wash skin thoroughly with soap and water. Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Wash contaminated clothing before reuse. Eyes Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Inhaled Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 04/2012 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

27 CRC Industries NZ Auckland NZ Technical Data Sheet 3100 CRC Food Grade White Chain & Drive Lube I. Product Description CRC Food Grade White Chain & Drive Lube is an extreme pressure lubricant formulated with PTFE for heavy-duty lubrication of chains, pins and sprockets. The high viscosity lubricant with excellent adhesive properties forms a tough film that remains in place during extreme wear without risking contamination of food and other clean environments. Temperature Range from -20 C to +170 C. NZFSA Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. II. Features & Benefits Formulated with PTFE Extreme pressure lubricant Durable heavy duty lubrication Repels moisture, resists wash off Excellent adhesive properties Remains in place Corrosion protection Lengthens chain and sprocket life For effective lubrication of all types of chain and conveyor systems 360 C degree valve Aerosol can be sprayed from any position even upside down Non-toxic, odourless, tasteless Temperature Range -20 C to +170 C NZFSA Approved C15 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact III. Application and Directions 1. Apply by spraying an even film at each bushing. 2. Wipe off any excess. 3. Repeat application when necessary. 4. Only use the necessary amount to achieve desired results. IV. Typical Properties and Characteristics Physical Properties: Flash Point > 300 C Appearance Milky tacky liquid Odour Mild Solubility Not in water % Volatile 0 Specific Gravity 0.88 Propellant Hydrocarbon Performance Characteristics: Type of film Non-drying Dry Time Non-drying Temperature Range -20 C to C

28 CRC Industries NZ Auckland NZ Technical Data Sheet 3100 CRC Food Grade White Chain & Drive Lube V. Package Description Part Number Size ml Aerosol VI. Special Precautions General: Use with adequate ventilation. Store in a cool, well-ventilated area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. Aerosol Cans: Do not puncture, incinerate or store above 50 C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock. First Aid: Swallowed Not considered a normal route of entry. Skin Remove contaminated clothing and wash skin thoroughly with soap and water. Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Wash contaminated clothing before reuse. Eyes Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Inhaled Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 10/2013 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

29 CRC Industries NZ Auckland NZ Technical Data Sheet 3101 CRC Food Grade Dry Lube I. Product Description CRC Food Grade Dry Lube is a technically advanced multi-purpose dry film lubricant that is applied wet and cures to a dry non-staining micro thin film of submicron PTFE particles. It penetrates and bonds to metal, wood, rubber, plastic, glass and most other surfaces and provides long lasting lubrication where conventional wet film lubricants are difficult to apply or retain. Ideal for lubrication in dusty environments where contaminants or airborne food particles might interfere with conventional wet lubricants. It prevents sticking, reducing friction, heat and wear with a very low coefficient of friction over a wide temperature range. Will not melt, freeze, run, pool or contaminate in-process materials. Ideal for sliding mechanisms and on extreme heavy loads to reduce wear and prevent galling or seizing. For mechanisms that are operated at infrequent intervals or are lubricated for life. Wide temperature range from -20 C to +250 C. NZFSA Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. II. Features & Benefits Cures to a thin dry film of PTFE particles For excellent long-lasting lubrication Resists dust and product debris build-up Ideal for food processing and packaging machinery Excellent adhesion to most surfaces Metal, wood, rubber, plastic, glass, etc. Excellent anti-static properties Does not contain oils or silicone 360 C degree valve Aerosol can be sprayed from any position even upside down Non-toxic, low odour, tasteless Wide temperature range Effective from -20 C to +250 C NZFSA Approved C15 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact III. Application and Directions Preparation: 1. Do not use on energized systems. Application: 1. Spray light, even film on areas requiring lubrication or protection. 2. Use extension tube for hard-to-reach areas. 3. Repeat application if necessary. IV. Typical Properties and Characteristics Physical Properties: Flash Point -5 C Boiling Point 8 C (initial) Odour Isopropyl Alcohol Appearance Opaque White Film Solubility Miscible with water % Volatile 96% Vapour Density 96% Specific Gravity(bulk) 0.88

30 CRC Industries NZ Auckland NZ Technical Data Sheet 3101 CRC Food Grade Dry Lube Performance Characteristics: Type of film Temperature Range Dry white PTFE film -20 C to +250 C V. Package Description Part Number Size ml Aerosol VI. Special Precautions General: Aerosol is highly flammable. Keep away from naked flames, electrical appliances/lights, lighted cigarettes, etc. Use with adequate ventilation. Store in a cool, well-ventilated area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. Refer to Material Safety Data Sheet for more details. Aerosol Cans: Do not puncture, incinerate or store above 50 C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock. First Aid: Swallowed Not considered a normal route of entry. Skin Remove contaminated clothing and wash skin thoroughly with soap and water. Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Wash contaminated clothing before reuse. Eyes Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Inhaled Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 10/2013 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

31 CRC Industries NZ Auckland NZ Technical Data Sheet 3102 CRC Food Grade CO Contact Cleaner I. Product Description CRC Food Grade CO Contact Cleaner is an evaporating precision cleaner designed to remove light contaminants from electrical and electronic equipment in the food industry. It removes light oils, dust, dirt and finger prints from electrical connectors, printed circuit boards, relays, switches, scales, timers and other equipment. It evaporates quickly, leaves no residue and is safe to use on all plastics. Regular use will help prevent electrical failures, increase performance and prolong equipment life. NZFSA Approved C22. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. II. Features & Benefits Leaves No Residue Prevents harmful build-up on equipment and eliminates wiping and rinsing Fast Evaporation Minimizes downtime Plastic Safe Allows one product to be used in all applications without risk of costly damage to sensitive modern plastics Non-corrosive Contains no lubricants 360 C degree valve Aerosol can be sprayed from any position even upside down Non-toxic, non-staining, colourless, low odour NZFSA Approved C22 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact III. Application and Directions Preparation: 1. Do not use on energized equipment. Application: 1. Spray until clean and allow cleaner to run-off. 2. Use an abrasive on heavy carbon deposits or corrosion to accelerate cleaning. 3. Allow to dry thoroughly and vent before reactivating system. 4. Follow routine maintenance schedule for prolonged equipment life and increased performance. IV. Typical Properties and Characteristics Physical Properties: Flash Point Boiling Point Appearance Odour Solubility Vapour Density >1 <0ºC TCC 70ºC initial Clear, colorless liquid Light Hydrocarbon Neg. in water Vapour Pressure (aerosol) C Specific Gravity Propellant Flammability Carbon Dioxide Highly flammable, do not use on energized equipment

32 CRC Industries NZ Auckland NZ Technical Data Sheet 3102 CRC Food Grade CO Contact Cleaner Performance Characteristics: ASTM D-1130 (KB Value) 27 ASTM D-877 (Dielectric Strength) 22,600 volts Bellcore Test (Plastic Compatibility) Passed V. Package Description Part Number Size ml Aerosol VI. Special Precautions General: Extremely flammable aerosol. Keep away from heat/sparks/open flames/hot surfaces. No smoking. Use with adequate ventilation. Store in a well-ventilated area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. Aerosol Cans: Do not puncture, incinerate or store above 50 C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock. First Aid: Swallowed Avoid giving milk or oils. Avoid giving alcohol. Not considered a normal route of entry. Skin Flush skin and hair with running water (and soap if available). Remove any adhering solids with industrial skin cleansing cream. Eyes Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Inhaled Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 05/2011 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

33 CRC Industries NZ Auckland NZ Technical Data Sheet 3362 CRC Food Grade Synthetic Lube I. Product Description CRC Food Grade Synthetic Lube is a synthetic multi-purpose lubricant designed for high temperature applications in the food industry and equipment directly exposed to food products like baker s ovens, stoves and racks. The blend of synthetic lubricating fluids forms a colourless, odourless and tasteless film that is effective even under the harshest conditions outperforming traditional wet lubricating oils. Extreme temperature range from -40 C to +350 C. NZFSA Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. II. Features & Benefits Extreme temperature range Effective from -40 C to +350 C Extreme Pressure Lube TIMKEN OK Load 18kg (40lb) Durable Reduces downtime for scheduled maintenance. Will not dry out, become sticky, gum up or wash off with water Does not contain silicone, acid, kerosene or petroleum distillates Safe for use on metals, plastics, rubbers, paints, fibreglass, enamels. Easier clean-up and removal of excess oil. Allows treated surfaces to be repainted. Solvent Free Safe to use on rubber seals and factory applied waterproofing membranes. 100% synthetic. High Flash Point Provides increased user safety 360 C degree valve Aerosol can be sprayed from any position even upside down Non-toxic, colourless, odourless, tasteless NZFSA Approved C15 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact III. Application and Directions Preparation: 1. Do not use on energized systems. Application: 1. Hold can 200mm to 300mm away from surface to be sprayed. 2. Spray a light, even film on area to be lubricated. 3. Wipe off excess with cloth. 4. Repeat application when necessary IV. Typical Properties and Characteristics Physical Properties: Flash Point > 350 C TCC Odour None Appearance Colourless liquid Solubility Neg. in water Vapour Density >air % Volatile Nil Specific Gravity 0.88

34 CRC Industries NZ Auckland NZ Technical Data Sheet 3362 CRC Food Grade Synthetic Lube Performance Characteristics: Type of film Dry Time Timken OK Load Temperature Range Thin, oily film Non-drying, wet oil 40lb -40 C to +300 C (Continuous) +350 C (Intermittent) V. Package Description Part Number Size ml Aerosol VI. Special Precautions General: Use with adequate ventilation. Store in a cool, well-ventilated area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. Refer to Material Safety Data Sheet for more details. Aerosol Cans: Do not puncture, incinerate or store above 50 C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock. First Aid: Swallowed Not considered a normal route of entry. Skin Remove contaminated clothing and wash skin thoroughly with soap and water. Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Wash contaminated clothing before reuse. Eyes Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Inhaled Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 05/2011 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

35 CRC Industries NZ, Auckland NZ Technical Data Sheet 5014 CRC Multilube Gel I. Product Description CRC Multilube Gel is a unique synthetic penetrating gel specifically formulated to provide a clean, odourless lubricant for high-pressure and high-temperature applications. It contains friction modifiers, anti-wear additives and tacking agents, does not drip off or fling off at high speed and resists hot and cold wash-off for long-lasting protection. It is ideally suited for highly loaded reciprocal moving parts and for general use in heavy industries, workshops, automotive and around the home workshop. Applied as a clear oil with excellent capillary action CRC Multilube Gel penetrates quickly into tight areas before solvents evaporate leaving a waterproof load bearing gel that stays in place and withstands high pressure and shock load conditions. The speedy shift in viscosity provides both, excellent penetration action and premium staying power. NZFSA Approved C15. Temperature range from -35 C to +300 C. NZ AsureQuality assessment. II. Application and Directions 1. Shake can well before using. 2. Spray a light even coating. 3. Use extension tube for hard-to-reach places. 4. Use minimum amount necessary, remove excess with a clean cloth. III. Features & Benefits Penetrating gel Applied as an oil, it penetrates on application, evaporates very quickly within 5 to 10 seconds and sets as a gel-like grease Odourless & clear For clean application and handling Does not attract dust Fresh & salt water proof Resists hot and cold wash off High pressure & heat resistant Remains active under high pressure loads, resists impacts of vibrations and shock load conditions Adhesive qualities High resistance to fling-off at high speeds and temperatures, does not drip off overhead applications Reduces noise and vibration Resistant against non-concentrated acids and alkalis Does not contain chlorinated solvents Free from silicones, resins & acids Will not damage rubber, o-rings, painted surfaces Wide temperature range From -35 C to +300 C NZFSA Approved C15 NZ AsureQuality assessment for food/beverage/dairy factory incidental contact Comes with Dual Action Actuator Choose pin-point stream or regular spraying action IV. Typical Properties and Characteristics Physical Properties: Flash Point < 0ºC Odour Low odour Appearance Clear gel-like grease Solubility Insoluble in water Propellant Hydrocarbon

36 CRC Industries NZ, Auckland NZ Technical Data Sheet 5014 CRC Multilube Gel Performance Characteristics: Type of film Set-up time Temperature Range High-tack viscous oil 5-10 seconds -35 C to +300 C V. Package Description Part Number Size ml Aerosol + Dual Action Actuator ml Aerosol + Dual Action Actuator VI. Special Precautions General: Extremely flammable aerosol. Keep away from heat, sparks, open flames, hot surfaces. No smoking. Do not spray on an open flame or other ignition source. Avoid breathing dust, fume, gas, vapours, spray. Use only outdoors or in a well-ventilated area. Wear protective gloves, protective clothing, eye protection, face protection. Store in a well-ventilated place. Keep container tightly closed. Store locked up. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. Aerosol Cans: Do not puncture, incinerate or store above 50 C. Exposure to high temperatures may cause can to burst. Do not place in direct sunlight or near any heat source. Aerosol cans will conduct electricity. Keep away from all live electrical sources including battery terminals, solenoids, electrical panels and other electronic components. Failure to observe this warning may result in serious injury from flash fire and/or electrical shock. First Aid: Swallowed Avoid giving milk or oils. Avoid giving alcohol. Not considered a normal route of entry. Skin Flush skin and hair with running water (and soap if available). Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Eyes Immediately hold eyelids apart and flush eye continuously for at least 15 minutes with fresh running water. Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Transport to hospital or doctor without delay. Inhalation Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 01/2013 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

37 CRC Industries NZ Auckland NZ Technical Data Sheet CRC Food Grade Multi-Purpose Grease I. Product Description CRC Food Grade Multipurpose Grease is a tenacious, white, aluminium complex grease providing superior lubrication and durability in food production and processing applications. It is designed for effective lubrication and protection of ball, roller and plain bearings that operate under high loads and temperatures and require a long grease life. CRC Food Grade Multipurpose Grease protects equipment against rust, oxidation and wear. It resists throw-off, shear breakdown as well as water and detergent wash out. It will not pound out of bearings and bushings during shock loads. Temperature Range from -20 C to +200 C. NZFSA Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. NSF H1 Registered for incidental food contact. II. Features & Benefits Excellent Adhesion - Resists Sling-Off Highly resistant to moisture, water and detergent Will not wash off when equipment is cleaned Protects against rust and corrosion Non-toxic, odourless, tasteless Wide Temperature Range Effective from -20 C to +200 C NZFSA Approved C15 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact NSF H1 Registered for incidental food contact III. Application and Directions Do not mix greases of different base type. Use a solvent to remove and clean out traces of incompatible grease before repacking. IV. Typical Properties and Characteristics Physical Properties: Flash Point > 230 C Boiling Point ND Appearance White Grease Odour Slight odour Solubility Slight in water % Volatile 0.3% NLGI Grade 2 Specific Gravity 0.89

38 CRC Industries NZ Auckland NZ Technical Data Sheet CRC Food Grade Multi-Purpose Grease Performance Characteristics: Viscosity Base 37 C SUS 600 Viscosity Base 99 C SUS 69 Drop Point (ASTM D-2268) 250 C Timken OK Load (ASTM D-2509) 30 lbs Four-Ball EP Weld (ASTM D-2596) 400 kg F Temperature Range -20 C to +200 C V. Package Description Part Number Size g Cartridge kg Pail VI. Special Precautions General: Use with adequate ventilation. Store in a cool, well-ventilated area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. First Aid: Swallowed If swallowed do NOT induce vomiting. Skin Remove contaminated clothing and wash skin thoroughly with soap and water. Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Wash contaminated clothing before reuse. Eyes Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Inhaled Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 05/2011 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

39 CRC Industries NZ Auckland NZ Technical Data Sheet CRC Food Grade Anti-Seize & Lubricating Compound I. Product Description CRC Food Grade Anti-Seize & Lubricating Compound is a premium aluminium complex based anti-seize compound with PTFE, specifically formulated for use in applications where incidental food contact is possible. It tenaciously adheres to metal surfaces providing protection from destructive metal to metal contact on sliding or rotational contact surfaces. It prevents seizure, galling and heat freeze on all types of engines during the installation and assembly of parts. Facilitates fast and easy disassembly. Remains active over long storage periods preventing corrosion and supporting cushioning of close fitting parts. Continued use prevents damage caused by extreme conditions, increasing performance and prolonging equipment life. Extreme temperature range from -53 C to +980 C. NZFSA Approved C15. NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact. NSF H1 Registered for incidental food contact. Conforms to MIL-PRF-907E. II. Features & Benefits PTFE fortified Tenaciously adheres to metal surfaces Protection during installation+assembly of parts Facilitates fast and easy disassembly Time saving Water Resistant Resists washout to prolong performance Prevents Corrosion Contains anti-rust and anti-wear additives to improve equipment life Excellent torque coefficient Safe on stainless steel Contains no metals Non-toxic, non-staining, tasteless Extreme temperature range Effective from -53 C to +980 C NZFSA Approved C15 NZ AsureQuality assessment for food/beverage including dairy factories with incidental contact NSF H1 Registered for incidental food contact Conforms to MIL-PRF-907E military specification III. Application and Directions 1. Always read entire label before using product. 2. For best results, clean scale and old compound from threaded surfaces. 3. Note: When grinding or wire brushing use a dust mask. 4. Coat mating surfaces and assemble. 5. To avoid contamination, keep container closed when not in use. 6. Contains hydrocarbons. Do not use in oxygen service. IV. Typical Properties and Characteristics Physical Properties: Flash Point > 200 C (COC) Appearance White paste Odour Mild Solubility Negligible in water %Solids - Active 40 Vapour Density Not Applicable NLGI Grade 1.5 Specific Gravity 1.17

40 CRC Industries NZ Auckland NZ Technical Data Sheet CRC Food Grade Anti-Seize & Lubricating Compound Performance Characteristics: Operating Temperature Range -53 C to +980 C Torque Coefficient (k) on Steel Nuts & Bolts 0.10 ASTM D-566 (Dropping Point) 232 C ASTM D -217 (Penetration) V. Package Description Part Number Size g Brush-Top Bottle VI. Special Precautions General: Use with adequate ventilation. Store in a cool, well-ventilated area. Dispose of empty containers safely. All unused product should be disposed of in conformance with local and HSNO regulations, do not contaminate water supply. First Aid: Swallowed If swallowed do NOT induce vomiting. Skin Remove contaminated clothing and wash skin thoroughly with soap and water. Remove any adhering solids with industrial skin cleansing cream. Do not use solvents. Seek medical attention in the event of irritation. Wash contaminated clothing before reuse. Eyes Immediately hold the eyelids apart and flush the eye continuously for at least 15 minutes with fresh running water. Inhaled Remove to fresh air. Lay patient down. Keep warm and rested. Refer to Material Safety Data Sheet for more details. TECHNICAL DATA SHEET Version 05/2011 PRODUCT WARRANTY: CRC offers a conditional warranty of this product for the period of 2 years from the date of manufacture. DISCLAIMER: All information on this data sheet is based on testing by CRC Industries NZ. All products should be tested for suitability on a particular application prior to actual use. CRC Industries makes no representations or warranties of any kind concerning this data.

41 MSDS

42 Material Safety Data Sheet (MSDS) Issue date 3003 CRC Food Grade 5.56 Aerosol 400ml 13/10/ CRC Food Grade Silicone Grease Tube 75ml 19/03/ CRC Food Grade Silicone Grease Pot 500ml 3038 CRC Food Grade White Grease Aerosol 284g 13/07/ CRC Food Grade Silicone Aerosol 284g 10/10/ CRC Food Grade Silicone Can 4 Litre 3041 CRC Food Grade Silicone Can 20 Litre 3048 CRC Silicone Mist 500ml 07/03/ CRC Food Grade Belt Dressing Aerosol 284g 08/05/ CRC Food Grade Penetrating Oil Aerosol 312g 08/05/ CRC Food Grade Chain Lube Aerosol 340g 22/02/ CRC Food Grade Machine Oil Aerosol 312g 28/05/ CRC Food Grade White Chain and Drive Lubricant Aerosol 400ml 08/05/ CRC Food Grade Dry Lube Aerosol 400ml 09/05/ CRC Food Grade CO Contact Cleaner Aerosol 400ml 09/05/ CRC Food Grade Synthetic Food Lube Aerosol 400ml 25/05/ CRC Multilube Gel Aerosol 500ml 07/12/ CRC Multilube Gel Aerosol 210ml CRC Food Grade Multi-Purpose Grease Cartridge 397g 08/05/ CRC Food Grade Multi-Purpose Grease Pail 18kg CRC Food Grade Anti-Seize Tub 227g 13/07/2011 DISCLAIMER: MSDS are valid for up to five years from their date of issue and are subject to change without notice. Current MSDS are availabe at

43 CG3 Page 1 of 1 5/08/2013 Chemwatch Company Contact No CRC 5.56 (AEROSOL) (NZ) INGREDIENTS CAS No % TWA liquid hydrocarbons Various > 60 LPG (liquefied petroleum gas) ppm mineral oil Not avail PROPERTIES Liquid. Gas. Does not mix with water. Floats on water. HAZARD PHRASES UN No :1950 Hazchem Code : 2YE DG Class :2.1 Subsidiary Risk :None Poisons Schedule :None DANGER Determined by Chemwatch using GHS criteria AUH044 H222 H335 H336 Risk of explosion if heated under confinement Extremely flammable aerosol. May cause respiratory irritation. May cause drowsiness or dizziness. FIRST AID Swallowed: Do NOT give milk or oil. Do NOT give alcohol. Skin: Wash with soap & water. Apply cleansing cream. ADVICE TO DOCTOR PRECAUTIONS FOR USE Gloves: When handling larger quantities: Respirator: Type AX-P Filter of sufficient capacity Flammability: Extremely flammable. SAFE HANDLING INFORMATION Storage & Transport: Keep container tightly closed. Keep container in a well ventilated place. Keep away from sources of ignition. No smoking. Store in cool, dry, protected area. Spills & Disposal: Eliminate ignition sources. Prevent from entering drains. Contain spillage by any means. Absorb with dry agent. Stop leak if safe to do so. Fire/Explosion Hazard: Highly flammable. Vapours/ gas heavier than air. Toxic smoke/fumes in a fire. Risk of explosion if heated under confinement. Fire Fighting: Keep containers cool. Water spray/fog. Emesis generally unnecessary. Debride for subcutaneous injection. Evaluate for respiratory distress. Consider lavage with cuffed tube. NO adrenalin. Issue Date: 5/10/2010 Print Date: 5/8/2013 Copyright ChemWatch

44 CG3 Page 1 of 1 17/06/2013 Chemwatch Company Contact No CRC(NZ) 3037 FOOD GRADE SILICONE GREASE INGREDIENTS CAS No % TWA NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS Poisons Schedule :None PROPERTIES Does not mix with water. HAZARD PHRASES Not hazardous FIRST AID Swallowed: Rinse mouth with water. Eye: Wash with running water. For discomfort seek medical advice. Skin: Wash with water and soap. Inhaled: Fresh air. Rest, keep warm. PRECAUTIONS FOR USE Engineering Controls: General Exhaust Ventilation adequate. Glasses: Not normally required. Gloves: When handling larger quantities: General purpose rubber glove. Flammability: Does not burn. SAFE HANDLING INFORMATION Storage & Transport: Store in cool, dry, protected area. Fire/Explosion Hazard: Toxic smoke/fumes in a fire. Fire Fighting: Keep surrounding area cool. Water spray/fog. ADVICE TO DOCTOR Treat symptomatically. Issue Date: 19/3/2012 Print Date: 17/6/2013 Copyright ChemWatch

45 CG3 Page 1 of 1 6/08/2013 Chemwatch Company Contact No CRC FOOD GRADE WHITE GREASE INGREDIENTS CAS No % TWA 2-methylpentane ppm zinc oxide hydrocarbon propellant ppm PROPERTIES Gas. HAZARD PHRASES UN No :1950 Hazchem Code : 2YE DG Class :2.1 Subsidiary Risk :None Poisons Schedule :None DANGER Determined by Chemwatch using GHS criteria AUH044 H222 H335 H336 H412 Risk of explosion if heated under confinement Extremely flammable aerosol. May cause respiratory irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. FIRST AID Swallowed: Do NOT give milk or oil. Do NOT give alcohol. Skin: Wash with soap & water. Apply cleansing cream. ADVICE TO DOCTOR Evaluate for respiratory distress. Consider lavage with cuffed tube. NO adrenalin. PRECAUTIONS FOR USE Glasses: Chemical goggles. Gloves: When handling larger quantities: Respirator: Type EAX Filter of sufficient capacity Flammability: Extremely flammable. SAFE HANDLING INFORMATION Storage & Transport: Keep container in a well ventilated place. Store in cool, dry, protected area. Spills & Disposal: Spilled liquid has low temperature and evaporates quickly. Eliminate ignition sources. Prevent from entering drains. Contain spillage by any means. Control vapour with water spray/fog. Fire/Explosion Hazard: Highly flammable. Vapours/ gas heavier than air. Toxic smoke/fumes in a fire. Risk of explosion if heated under confinement. Fire Fighting: Keep containers cool. Water spray/fog. Issue Date: 13/7/2013 Print Date: 6/8/2013 Copyright ChemWatch

46 CG3 Page 1 of 1 14/06/2013 Chemwatch Company Contact No CRC FOOD GRADE SILICONE (AEROSOL) INGREDIENTS CAS No % TWA n-hexane <2 20 ppm mixed hexanes aliphatic hydrocarbon solvent ppm 1,1-difluoroethane polydimethylsiloxane PROPERTIES Liquid. Gas. Does not mix with water. Floats on water. HAZARD PHRASES UN No :1950 Hazchem Code : 2YE DG Class :2.1 Subsidiary Risk :None Poisons Schedule :None DANGER Determined by Chemwatch using GHS criteria AUH044 H222 H302 H361 H335 H336 H373 H412 Risk of explosion if heated under confinement Extremely flammable aerosol. Harmful if swallowed. Suspected of damaging fertility or the unborn child. May cause respiratory irritation. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure. Harmful to aquatic life with long lasting effects. FIRST AID Swallowed: Do NOT give milk or oil. Do NOT give alcohol. Skin: Wash with soap & water. Apply cleansing cream. ADVICE TO DOCTOR Evaluate for respiratory distress. Consider lavage with cuffed tube. NO adrenalin. PRECAUTIONS FOR USE Glasses: Safety Glasses. Gloves: When handling larger quantities: Respirator: Type AX-P Filter of sufficient capacity Flammability: Extremely flammable. SAFE HANDLING INFORMATION Storage & Transport: Keep container tightly closed. Keep container in a well ventilated place. Keep away from food, drink and animal feeding stuffs. Keep away from sources of ignition. No smoking. Store in cool, dry, protected area. Spills & Disposal: Spilled liquid has low temperature and evaporates quickly. Eliminate ignition sources. Prevent from entering drains. Contain spillage by any means. Control vapour with water spray/fog. Absorb with dry agent. Stop leak if safe to do so. To clean the floor and all objects contaminated by this material, use water and detergent. Fire/Explosion Hazard: Highly flammable. Vapours/ gas heavier than air. Toxic smoke/fumes in a fire. Risk of explosion if heated under confinement. Fire Fighting: Keep containers cool. Water spray/fog. Issue Date: 10/10/2012 Print Date: 14/6/2013 Copyright ChemWatch

47 CG3 Page 1 of 1 12/09/2013 Chemwatch Company Contact No CRC(NZ) 3048 SILICONE MIST INGREDIENTS CAS No % TWA dimethyl, phenylmethylpolysiloxane, trimethyl terminated butane ppm propane PROPERTIES Liquid. Gas. Does not mix with water. HAZARD PHRASES UN No :1950 Hazchem Code : 2YE DG Class :2.1 Subsidiary Risk :None Poisons Schedule :None DANGER Determined by Chemwatch using GHS criteria AUH044 H222 H335 H336 Risk of explosion if heated under confinement Extremely flammable aerosol. May cause respiratory irritation. May cause drowsiness or dizziness. FIRST AID Skin: Wash with soap & water. Apply cleansing cream. PRECAUTIONS FOR USE Gloves: When handling larger quantities: Respirator: Type AX-P Filter of sufficient capacity Flammability: Extremely flammable. SAFE HANDLING INFORMATION Storage & Transport: Keep container tightly closed. Keep container in a well ventilated place. Keep away from sources of ignition. No smoking. Store in cool, dry, protected area. Spills & Disposal: Eliminate ignition sources. Prevent from entering drains. Contain spillage by any means. Absorb with dry agent. Stop leak if safe to do so. Fire/Explosion Hazard: Highly flammable. Vapours/ gas heavier than air. Toxic smoke/fumes in a fire. Risk of explosion if heated under confinement. Fire Fighting: Keep containers cool. Water spray/fog. Issue Date: 7/3/2012 Print Date: 12/9/2013 Copyright ChemWatch

48 CG3 Page 1 of 1 5/08/2013 Chemwatch Company Contact No CRC FOOD GRADE BELT DRESSING INGREDIENTS CAS No % TWA n-hexane ppm mixed hexanes aliphatic hydrocarbon solvent ppm LPG (liquefied petroleum gas) ppm isobutylene homopolymer PROPERTIES Liquid. Gas. Does not mix with water. Floats on water. HAZARD PHRASES UN No :1950 Hazchem Code : 2YE DG Class :2.1 Subsidiary Risk :None Poisons Schedule :None DANGER Determined by Chemwatch using GHS criteria AUH044 H222 H361 H335 H336 H373 H412 Risk of explosion if heated under confinement Extremely flammable aerosol. Suspected of damaging fertility or the unborn child. May cause respiratory irritation. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure. Harmful to aquatic life with long lasting effects. FIRST AID Swallowed: Do NOT give milk or oil. Do NOT give alcohol. Skin: Wash with soap & water. Apply cleansing cream. ADVICE TO DOCTOR Evaluate for respiratory distress. Consider lavage with cuffed tube. NO adrenalin. PRECAUTIONS FOR USE Glasses: Safety Glasses. Gloves: When handling larger quantities: Respirator: Type AX Filter of sufficient capacity Flammability: Extremely flammable. SAFE HANDLING INFORMATION Storage & Transport: Keep container tightly closed. Keep container in a well ventilated place. Keep away from food, drink and animal feeding stuffs. Keep away from sources of ignition. No smoking. Store in cool, dry, protected area. Spills & Disposal: Spilled liquid has low temperature and evaporates quickly. Eliminate ignition sources. Prevent from entering drains. Contain spillage by any means. Control vapour with water spray/fog. Absorb with dry agent. Stop leak if safe to do so. To clean the floor and all objects contaminated by this material, use water and detergent. Fire/Explosion Hazard: Highly flammable. Vapours/ gas heavier than air. Toxic smoke/fumes in a fire. Risk of explosion if heated under confinement. Fire Fighting: Keep containers cool. Water spray/fog. Issue Date: 8/5/2011 Print Date: 5/8/2013 Copyright ChemWatch

49 CG3 Page 1 of 1 14/06/2013 Chemwatch Company Contact No CRC FOOD GRADE PENETRATING OIL (AEROSOL) INGREDIENTS CAS No % TWA isoparaffins petroleum hydrotreated HFP mg/m³ carbon dioxide ppm white mineral oil (petroleum) mg/m³ PROPERTIES Liquid. Gas. Does not mix with water. Floats on water. HAZARD PHRASES UN No :1950 Hazchem Code : 2YE DG Class :2.2 Subsidiary Risk :None Poisons Schedule :None WARNING Determined by Chemwatch using GHS criteria AUH044 H335 H336 H410 Risk of explosion if heated under confinement May cause respiratory irritation. May cause drowsiness or dizziness. Very toxic to aquatic life with long lasting effects. FIRST AID Swallowed: Do NOT give milk or oil. Do NOT give alcohol. Skin: Wash with soap & water. Apply cleansing cream. ADVICE TO DOCTOR PRECAUTIONS FOR USE Gloves: When handling larger quantities: Polyethylene. Respirator: Type A-P Filter of sufficient capacity Flammability: Does not burn. SAFE HANDLING INFORMATION Storage & Transport: Keep container tightly closed. Keep container in a well ventilated place. Store in cool, dry, protected area. Spills & Disposal: Prevent from entering drains. Contain spillage by any means. Absorb with dry agent. Stop leak if safe to do so. This material and its container must be disposed of in a safe way. To clean the floor and all objects contaminated by this material, use water and detergent. Fire/Explosion Hazard: Vapours/ gas heavier than air. Toxic smoke/fumes in a fire. Risk of explosion if heated under confinement. Fire Fighting: Keep containers cool. Keep surrounding area cool. Water spray/fog. Evaluate for respiratory distress. Consider lavage with cuffed tube. NO adrenalin. Issue Date: 8/5/2011 Print Date: 14/6/2013 Copyright ChemWatch

50 CG3 Page 1 of 1 5/08/2013 Chemwatch Company Contact No CRC FOOD GRADE CHAIN LUBE INGREDIENTS CAS No % TWA LPG (liquefied petroleum gas) ppm white mineral oil (petroleum) PROPERTIES Liquid. Gas. Does not mix with water. Floats on water. HAZARD PHRASES UN No :1950 Hazchem Code : 2YE DG Class :2.2 Subsidiary Risk :None Poisons Schedule :None WARNING Determined by Chemwatch using GHS criteria AUH044 H335 Risk of explosion if heated under confinement May cause respiratory irritation. FIRST AID Skin: Wash with soap & water. Apply cleansing cream. PRECAUTIONS FOR USE Gloves: When handling larger quantities: Respirator: Type AX-P Filter of sufficient capacity Flammability: Does not burn. SAFE HANDLING INFORMATION Storage & Transport: Keep container tightly closed. Keep container in a well ventilated place. Store in cool, dry, protected area. Spills & Disposal: Prevent from entering drains. Contain spillage by any means. Absorb with dry agent. Stop leak if safe to do so. Fire/Explosion Hazard: Toxic smoke/fumes in a fire. Risk of explosion if heated under confinement. Fire Fighting: Keep containers cool. Keep surrounding area cool. Water spray/fog. Issue Date: 22/2/2013 Print Date: 5/8/2013 Copyright ChemWatch

51 CG3 Page 1 of 1 14/06/2013 Chemwatch Company Contact No CRC FOOD GRADE MACHINE OIL INGREDIENTS CAS No % TWA distillates, petroleum, light, hydrotreated mg/m³ carbon dioxide ppm white mineral oil (petroleum) mg/m³ PROPERTIES Liquid. Gas. Does not mix with water. Floats on water. HAZARD PHRASES UN No :1950 Hazchem Code : 2YE DG Class :2.2 Subsidiary Risk :None Poisons Schedule :None WARNING Determined by Chemwatch using GHS criteria AUH044 AUH066 H315 H335 H336 Risk of explosion if heated under confinement Repeated exposure may cause skin dryness or cracking Causes skin irritation. May cause respiratory irritation. May cause drowsiness or dizziness. FIRST AID Swallowed: Do NOT give milk or oil. Do NOT give alcohol. Skin: Wash with soap & water. Apply cleansing cream. PRECAUTIONS FOR USE Gloves: When handling larger quantities: Respirator: Type A-P Filter of sufficient capacity Flammability: Does not burn. SAFE HANDLING INFORMATION Storage & Transport: Keep container tightly closed. Keep container in a well ventilated place. Store in cool, dry, protected area. Spills & Disposal: Prevent from entering drains. Contain spillage by any means. Absorb with dry agent. Stop leak if safe to do so. To clean the floor and all objects contaminated by this material, use water and detergent. Fire/Explosion Hazard: Vapours/ gas heavier than air. Toxic smoke/fumes in a fire. Risk of explosion if heated under confinement. Fire Fighting: Keep containers cool. Keep surrounding area cool. Water spray/fog. ADVICE TO DOCTOR Evaluate for respiratory distress. Consider lavage with cuffed tube. NO adrenalin. Issue Date: 28/5/2011 Print Date: 14/6/2013 Copyright ChemWatch

52 CG3 Page 1 of 1 14/06/2013 Chemwatch Company Contact No. - CRC (NZ) 3100 WHITE CHAIN AND DRIVE LUBRICANT AEROSOL INGREDIENTS CAS No % TWA 1-decene trimer and tetramer, hydrogenated mg/m³ white mineral oil (petroleum) mg/m³ LPG (liquefied petroleum gas) ppm polytetrafluoroethylene PROPERTIES Liquid. Gas. Does not mix with water. HAZARD PHRASES UN No :1950 Hazchem Code : 2YE DG Class :2.2 Subsidiary Risk :None Poisons Schedule :None WARNING Determined by Chemwatch using GHS criteria AUH044 H335 H336 Risk of explosion if heated under confinement May cause respiratory irritation. May cause drowsiness or dizziness. FIRST AID Skin: Wash with soap & water. Apply cleansing cream. PRECAUTIONS FOR USE Gloves: When handling larger quantities: Respirator: Type AX-P Filter of sufficient capacity Flammability: Does not burn. SAFE HANDLING INFORMATION Storage & Transport: Keep container tightly closed. Keep container in a well ventilated place. Store in cool, dry, protected area. Spills & Disposal: Prevent from entering drains. Contain spillage by any means. Absorb with dry agent. Stop leak if safe to do so. Fire/Explosion Hazard: Vapours/ gas heavier than air. Toxic smoke/fumes in a fire. Risk of explosion if heated under confinement. Fire Fighting: Keep containers cool. Keep surrounding area cool. Water spray/fog. Issue Date: 8/5/2011 Print Date: 14/6/2013 Copyright ChemWatch

53 CG3 Page 1 of 1 14/06/2013 Chemwatch Company Contact No. - CRC (NZ) 3101 DRY LUBE AEROSOL INGREDIENTS CAS No % TWA isopropanol ppm LPG (liquefied petroleum gas) ppm polytetrafluoroethylene PROPERTIES Liquid. Gas. HAZARD PHRASES UN No :1950 Hazchem Code : 2YE DG Class :2.1 Subsidiary Risk :None Poisons Schedule :None DANGER Determined by Chemwatch using GHS criteria AUH019 AUH044 H222 H319 H335 H336 May form explosive peroxides Risk of explosion if heated under confinement Extremely flammable aerosol. Causes serious eye irritation. May cause respiratory irritation. May cause drowsiness or dizziness. FIRST AID Skin: Wash with soap & water. Apply cleansing cream. ADVICE TO DOCTOR Severe exposure indicated by respiratory distress/ hypotension. Management is essentially supportive. PRECAUTIONS FOR USE Glasses: Chemical goggles. Gloves: 1.NITRILE+PVC 2.PE/EVAL/PE Respirator: Type AX Filter of sufficient capacity Flammability: Extremely flammable. May form explosive peroxides. SAFE HANDLING INFORMATION Storage & Transport: Keep container tightly closed. Keep container in a well ventilated place. Keep away from sources of ignition. No smoking. Handle and open container with care. Store in cool, dry, protected area. Spills & Disposal: Eliminate ignition sources. Prevent from entering drains. Contain spillage by any means. Absorb with dry agent. Stop leak if safe to do so. To clean the floor and all objects contaminated by this material, use water and detergent. Fire/Explosion Hazard: Highly flammable. Vapours/ gas heavier than air. Toxic smoke/fumes in a fire. Risk of explosion if heated under confinement. Fire Fighting: Keep containers cool. Water spray/fog. Foam - alcohol type. Issue Date: 9/5/2011 Print Date: 14/6/2013 Copyright ChemWatch

54 CG3 Page 1 of 1 5/08/2013 Chemwatch Company Contact No CRC (NZ) 3102 FOOD GRADE CONTACT CLEANER INGREDIENTS CAS No % TWA naphtha petroleum, light, hydrotreated > ppm carbon dioxide ppm PROPERTIES Liquid. Gas. Does not mix with water. Floats on water. HAZARD PHRASES UN No :1950 Hazchem Code : 2YE DG Class :2.1 Subsidiary Risk :None Poisons Schedule :NZS4 DANGER Determined by Chemwatch using GHS criteria AUH044 H222 H315 H361 H335 H336 H373 H411 Risk of explosion if heated under confinement Extremely flammable aerosol. Causes skin irritation. Suspected of damaging fertility or the unborn child. May cause respiratory irritation. May cause drowsiness or dizziness. May cause damage to organs through prolonged or repeated exposure. Toxic to aquatic life with long lasting effects. FIRST AID Swallowed: Do NOT give milk or oil. Do NOT give alcohol. Skin: Wash with soap & water. Apply cleansing cream. ADVICE TO DOCTOR Evaluate for respiratory distress. Consider lavage with cuffed tube. NO adrenalin. PRECAUTIONS FOR USE Glasses: Safety Glasses. Gloves: When handling larger quantities: Neoprene. Respirator: Type A Filter of sufficient capacity Flammability: Extremely flammable. SAFE HANDLING INFORMATION Storage & Transport: Keep container tightly closed. Keep container in a well ventilated place. Keep away from food, drink and animal feeding stuffs. Keep away from sources of ignition. No smoking. Store in cool, dry, protected area. Spills & Disposal: Spilled liquid has low temperature and evaporates quickly. Eliminate ignition sources. Prevent from entering drains. Contain spillage by any means. Control vapour with water spray/fog. Absorb with dry agent. Stop leak if safe to do so. This material and its container must be disposed of in a safe way. To clean the floor and all objects contaminated by this material, use water and detergent. Fire/Explosion Hazard: Highly flammable. Vapours/ gas heavier than air. Toxic smoke/fumes in a fire. Risk of explosion if heated under confinement. Fire Fighting: Keep containers cool. Water spray/fog. Issue Date: 9/5/2011 Print Date: 5/8/2013 Copyright ChemWatch

55 CG3 Page 1 of 1 14/06/2013 Chemwatch Company Contact No CRC 3362 SYNTHETIC FOOD LUBE (AEROSOL) INGREDIENTS CAS No % TWA 1-decene dimer, hydrogenated mg/m³ 1-decene homopolymer, hydrogenated LPG (liquefied petroleum gas) ppm 1-dodecene polymer with 1-octene, hydrogenated PROPERTIES Liquid. Gas. Does not mix with water. HAZARD PHRASES UN No :1950 Hazchem Code : 2YE DG Class :2.2 Subsidiary Risk :None Poisons Schedule :None WARNING Determined by Chemwatch using GHS criteria AUH044 H335 H336 H413 Risk of explosion if heated under confinement May cause respiratory irritation. May cause drowsiness or dizziness. May cause long lasting harmful effects to aquatic life. FIRST AID Skin: Wash with soap & water. Apply cleansing cream. PRECAUTIONS FOR USE Gloves: When handling larger quantities: Respirator: Type AX-P Filter of sufficient capacity Flammability: Does not burn. SAFE HANDLING INFORMATION Storage & Transport: Keep container tightly closed. Keep container in a well ventilated place. Store in cool, dry, protected area. Spills & Disposal: Prevent from entering drains. Contain spillage by any means. Absorb with dry agent. Stop leak if safe to do so. Fire/Explosion Hazard: Toxic smoke/fumes in a fire. Risk of explosion if heated under confinement. Fire Fighting: Keep containers cool. Keep surrounding area cool. Water spray/fog. Issue Date: 25/5/2011 Print Date: 14/6/2013 Copyright ChemWatch

56 CG3 Page 1 of 1 5/08/2013 Chemwatch Company Contact No CRC(NZ) MULTILUBE INGREDIENTS CAS No % TWA Solvent None butane ppm propane PROPERTIES Liquid. Gas. Does not mix with water. Floats on water. HAZARD PHRASES UN No :1950 Hazchem Code : 2YE DG Class :2.1 Subsidiary Risk :None Poisons Schedule :None DANGER Determined by Chemwatch using GHS criteria AUH044 H222 H315 H335 H336 H410 Risk of explosion if heated under confinement Extremely flammable aerosol. Causes skin irritation. May cause respiratory irritation. May cause drowsiness or dizziness. Very toxic to aquatic life with long lasting effects. FIRST AID Swallowed: Do NOT give milk or oil. Do NOT give alcohol. Skin: Wash with soap & water. Apply cleansing cream. ADVICE TO DOCTOR Evaluate for respiratory distress. Consider lavage with cuffed tube. NO adrenalin. PRECAUTIONS FOR USE Gloves: 1.NITRILE+PVC 2.NITRILE 3.PVC Respirator: Type AX Filter of sufficient capacity Flammability: Extremely flammable. SAFE HANDLING INFORMATION Storage & Transport: Keep container tightly closed. Keep container in a well ventilated place. Keep away from sources of ignition. No smoking. Store in cool, dry, protected area. Spills & Disposal: Eliminate ignition sources. Prevent from entering drains. Contain spillage by any means. Absorb with dry agent. Stop leak if safe to do so. This material and its container must be disposed of in a safe way. To clean the floor and all objects contaminated by this material, use water and detergent. Fire/Explosion Hazard: Highly flammable. Vapours/ gas heavier than air. Toxic smoke/fumes in a fire. Risk of explosion if heated under confinement. Fire Fighting: Keep containers cool. Water spray/fog. Issue Date: 7/12/2011 Print Date: 5/8/2013 Copyright ChemWatch

57 CG3 Page 1 of 1 14/06/2013 Chemwatch Company Contact No CRC FOOD GRADE MULTI-PURPOSE GREASE INGREDIENTS CAS No % TWA zinc oxide mg/m³ calcium carbonate mg/m³ white mineral oil (petroleum) mg/m³ isobutylene homopolymer NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS Poisons Schedule :None PROPERTIES Does not mix with water. Floats on water. HAZARD PHRASES WARNING Determined by Chemwatch using GHS criteria H335 H411 May cause respiratory irritation. Toxic to aquatic life with long lasting effects. FIRST AID Swallowed: Give water (if conscious). Seek medical advice. Eye: Wash with running water. Skin: Remove contaminated clothing. Wash with water and soap. Inhaled: Fresh air. Rest, keep warm. ADVICE TO DOCTOR PRECAUTIONS FOR USE Engineering Controls: General Exhaust Ventilation adequate. Glasses: Chemical goggles. Gloves: PVC chemical resistant type. Respirator: Type A-P Filter of sufficient capacity Flammability: Combustible. SAFE HANDLING INFORMATION Storage & Transport: Store in cool, dry, protected area. Spills & Disposal: Eliminate ignition sources. This material and its container must be disposed of in a safe way. To clean the floor and all objects contaminated by this material, use water and detergent. Fire/Explosion Hazard: Vapours/ gas heavier than air. Toxic smoke/fumes in a fire. Fire Fighting: Foam. Treat symptomatically. Issue Date: 8/5/2011 Print Date: 14/6/2013 Copyright ChemWatch

58 CG3 Page 1 of 1 5/08/2013 Chemwatch Company Contact No CRC FOOD GRADE ANTI-SEIZE INGREDIENTS CAS No % TWA talc zinc oxide diphenylamine <0.1 NOT REGULATED FOR TRANSPORT OF DANGEROUS GOODS Poisons Schedule :None PROPERTIES Does not mix with water. Sinks in water. HAZARD PHRASES WARNING Determined by Chemwatch using GHS criteria H335 H412 May cause respiratory irritation. Harmful to aquatic life with long lasting effects. FIRST AID Swallowed: Give water (if conscious). Seek medical advice. Eye: Wash with running water. Skin: Remove contaminated clothing. Wash with water and soap. Inhaled: Fresh air. Rest, keep warm. PRECAUTIONS FOR USE Engineering Controls: General Exhaust Ventilation adequate. Glasses: Chemical goggles. Gloves: PVC chemical resistant type. Flammability: Combustible. SAFE HANDLING INFORMATION Storage & Transport: Store in cool, dry, protected area. Spills & Disposal: Eliminate ignition sources. Fire/Explosion Hazard: Vapours/ gas heavier than air. Toxic smoke/fumes in a fire. Fire Fighting: Foam. ADVICE TO DOCTOR Treat symptomatically. Issue Date: 13/7/2013 Print Date: 5/8/2013 Copyright ChemWatch

59 NZFSA

60 Part #: 3003

61 Part #: 3003

62 Part #: 3037

63 Part #: 3037

64

65

66

67

68

69

70

71

72

73

74

75

76 Part # 3102

77 Part # 3102

78 Part # 3362

79 Part # 3362

80

81

82

83

84 ASURE QUALITY

85 AsureQuality 3003 CRC Food Grade 5.56 Aerosol 400ml 3037 CRC Food Grade Silicone Grease Tube 75ml 3039 CRC Food Grade Silicone Grease Pot 500ml 3038 CRC Food Grade White Grease Aerosol 284g 3043 CRC Food Grade Silicone Aerosol 284g 3042 CRC Food Grade Silicone Can 4 Litre 3041 CRC Food Grade Silicone Can 20 Litre 3086 CRC Food Grade Penetrating Oil Aerosol 312g 3092 CRC Food Grade Machine Oil Aerosol 312g CRC Food Grade Multi-Purpose Grease Cartridge 397g CRC Food Grade Multi-Purpose Grease Pail 18kg 3091 CRC Food Grade Chain Lube Aerosol 340g CRC Food Grade Anti-Seize Tub 227g 3065 CRC Food Grade Belt Dressing Aerosol 284g 3100 CRC Food Grade White Chain and Drive Lubricant Aerosol 400ml 3101 CRC Food Grade Dry Lube Aerosol 400ml 3102 CRC Food Grade CO Contact Cleaner Aerosol 400ml 3362 CRC Food Grade Synthetic Food Lube Aerosol 400ml 5014 CRC Multilube Gel Aerosol 500ml 5018 CRC Multilube Gel Aerosol 210ml 3048 CRC Silicone Mist 500ml DISCLAIMER: These documents are accurate at the time of issue.

86

87

88

89

90

91

92

93