LYNX Quick User Guide

Size: px

Start display at page:

Download "LYNX Quick User Guide"

Justin Ward
5 years ago
Views:

1 LYNX Quick User Guide AIR TEMPERATURE 58.1 WATER TEMPERATURE 61.2 HUMIDITY HEAT RECLAIM OFF CURRENT MODE ALARM STATUS COOLING MODE LTHW TEMPERATURE UNOCCUPIED HEALTHY OFF FLOW RETURN HOME LOGIN OPERATING SCHEMATIC Quick user guide 2017 PoolPak LLC. All rights reserved. Page 1

Status screen Displays current air temperature (ºF). Press to view historical graph.

In Engineer Mode press setpoint to adjust. Displays current water temperature (ºF).

In Engineer Mode press setpoint to adjust.

Will show green when healthy, and red when in fault. Press coloured button to view alarms pages.

Smaller readings show compressor setpoint (left), fresh air setpoint (right).

2 Status screen Displays current air temperature (ºF). Press to view historical graph. Smaller readings show occupied setpoint (left), unoccupied setpoint (right). In Engineer Mode press setpoint to adjust. Displays current water temperature (ºF). Press to view historical graph. Smaller reading shows setpoint. In Engineer Mode press setpoint to adjust. Displays current mode depending on pool cover interlock position. Displays current alarm status. Will show green when healthy, and red when in fault. Press coloured button to view alarms pages. See page 3 Displays current humidity (RH%). Press to view historical graph. Smaller readings show compressor setpoint (left), fresh air setpoint (right). In Engineer Mode press setpoint to adjust. Displays current flow and return LTHW temperature (ºF). Press to view historical graph. Press to log into Engineer Mode. (Password currently set to 9999) See page 4 Press to view current operating schematic. See page PoolPak LLC. All rights reserved. Page 2

Graph screen Displays historical logged data.

3 Alarm screen Green indicates healthy. Red indicates in fault. Press HOME button to go back to Status screen. Graph screen Displays historical logged data. User can pinch and zoom to view a chosen time period. Press Values to display raw data. Press + to add comparable values PoolPak LLC. All rights reserved. Page 3

Login screen To log into Engineer Mode the password is set to 9999.

Task launcher screen This is the first screen displayed after logging into Engineer

4 Login screen To log into Engineer Mode the password is set to Use green button to toggle between letters and numbers. Press Next to login. Task launcher screen This is the first screen displayed after logging into Engineer Mode. Press Graphics button to view the Status screen, in Engineer Mode PoolPak LLC. All rights reserved. Page 4

Status screen (Engineer mode) Status screen appears the same under both login accounts. In Engineer Mode setpoints can be adjusted by pressing the value.

5 Status screen (Engineer mode) Status screen appears the same under both login accounts. In Engineer Mode setpoints can be adjusted by pressing the value. Press the settings button to enter Engineer mode (settings) screen. Engineer mode (settings) screen The calibration screen allows you to alter the thermostat values. The adjustments screen allows you to alter the mechanics of the system. See page PoolPak LLC. All rights reserved. Page 5

Engineer mode (calibration) screen Alter a thermostat value by pressing the displayed figure. This will take you to a data entry screen. Simply enter the offset value.

6 Engineer mode (calibration) screen Alter a thermostat value by pressing the displayed figure. This will take you to a data entry screen. Simply enter the offset value. Engineer mode (adjustments) screen Alter the operation of the unit by pressing the displayed figure. This will take you to a data entry screen. Simply enter desired value or switch on/off PoolPak LLC. All rights reserved. Page 6

Operating schematic screen Displays current real time operating mode, with current values displayed to the left. Press HOME button to go back to Status screen.

7 Operating schematic screen Displays current real time operating mode, with current values displayed to the left. Press HOME button to go back to Status screen. Additional notes - To change the date and time go to Settings on the Task Launcher screen. - To go to full screen mode hold your finger on the screen until the screen menu appears. Select full screen option. - If the red alarm symbol displays in the top menu bar, press the alarm symbol to display the alarms page. Select the alarm and clear the fault. (This is likely to happen after powering on the unit each time). With more than 45 years of experience in indoor pool dehumidification equipment manufacturing, PoolPak LLC is the most well-known brand in the industry. Our people and products work daily to improve the quality and comfort of indoor pool environments. PoolPak dehumidification solutions include a variety of heating, ventilation, and air conditioning systems, in addition to an industry-leading PoolPak support network. For more information, please visit Industrial Drive York, Pennsylvania USA Fax PoolPak LLC. All rights reserved. SVW08-LWUG

ComPak Series with CommandPak Control System CPCS BACnet MS/TP BAS Interface User s Guide DOCUMENT #: SVW06-CPBACNETMSTP

ComPak Series with CommandPak Control System CPCS BACnet MS/TP BAS Interface User s Guide DOCUMENT #: SVW06-CPBACNETMSTP-20180529 UPDATED: MAY 2018 INTRODUCTION ComPak dehumidifiers equipped with the CommandPak