Illustrated Parts Catalogue EXTRA 300/SC. Doc. No. : EA-0C703

Transcription

1 Illustrated Parts Catalogue EXTRA 300/SC Doc. No. : EA-0C703 Page Date: : June January

2 Record of Revisions Issue Date Approval Date. Edition 6. June 2008 EASA Major Change 7. July 2008 Approval N. EASA.A.C Revision 26. January 202 The technical content of this document is approved under the authority of DOA N. EASA.2J July Revision 27. November 202 EASA Major Change Approval N & April Revision 5. September 203 The technical content of this document is approved under the authority of DOA N. EASA.2J December Revision 2. September 204 The technical content of this document is approved under the authority of DOA N. EASA.2J January Revision 5. November 205 The technical content of this document is approved under the authority of DOA N. EASA.2J November 205 Page Date: : November January

3 Log of Effective Pages Page Date Page Date 0- Title Page thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru thru June January November January September January January November January November January September January September January January January September November September September January September January November January January January September January January November January January September January September January November January September January November November January November 202 Page Date: : November January

4 Page Date : 26. January Page Date : 27. November 202

5 Table of Contents 2 Air Conditioning 2-23 Communications Electrical System Equipment and Furnishings Flight Controls Fuel 28-3 Indicating/ Recording Systems 3-32 Landing Gear Lights Navigation 34-5 Standard Practices and Structures - General 5-53 Fuselage Stabilizers Wing 57-6 Propeller 6-7 Power Plant 7-72 Engine Engine Fuel and Control Engine Indicating Exhaust Oil Smoke 96- Page Date: : September January

6 Explanations to the EXTRA 300/SC Illustrated Parts Catalogue Concerning the chapter set-up and the structure of parts lists this Parts Catalogue has been prepared referring to the recommendations of the ATA 00 Specification. So the respective system chapter can be selected from the table of contents to find the desired part. Where possible the parts have been usefully sorted (e.g. from inboard to outboard, front to rear, center to periphery etc.) to make finding easier. Independent parts, assemblies or groups of parts are generally divided by an empty line. A dot in the nomenclature column at the beginning of a part designation means that this part is a constituent part of the next higher (minus one dot) assembly: Partnumber Nomenclature UpA VB tail wheel assembly bolt DIN92 M0x washer DIN25 M stop nut LN LH wheel half RH wheel half spacer sleeve bearing solid rubber tire always refer to one single part, assembly or group of parts: bracket washer DIN stop nut LN (each bracket is attached by 2 washers and 2 stop nuts). If LH/RH parts are described the refer to one of it: L pedal rear LH pre-assembled R pedal rear RH pre-assembled bolt AN3-5A washer DIN902 5,3x5x,2 galznc washer DIN nut AN3 4 (each pedal is attached by 4 bolts etc.) Sometimes refer to a group of parts. In this case these parts are not divided by an empty line: pulley AN20-3B (MS B) cable guide bolt AN washer DIN nut MS Stop Metal Page Date : 26. January

7 (One pulley together with one cable guide is attached by bolt etc.) Generally all parts are ready for installation, where necessary painted. A K as the last letter of the partnumber means, that this part is painted custom-specified. Note: UpA in the table headline means Units per Assembly eff means effective for serial number Page Date : 26. January

8 2 Air Conditioning Page Date: : September January

9 2-40 Heating 8D baffle LH Front 8D Flange 394 rivet 4 8C SCAT ducting, baffle -> exhaust 0353 worm drive hose clamp hose clamp 3 8C SCAT ducting, exhaust -> selector box 0353 worm drive hose clamp D heater selector box NL400 bolt LN washer DIN25 A4,3-40 HV - 8 galznc nut LN Polystop 4 8D heater distribution box Page Date: : September January

10 8C SCAT ducting, distribution 2 box -> outlet worm drive hose clamp FT0030 outlet RH FT0099 outlet LH 0027 T-handle dash control, single wire nut LN polystop washer DIN902 5,3x5x,2 2 galznc 3323 hose clamp bolt LN nut LN polystop 0046 washer DIN25-5, clamping plate 2 NL400 bolt LN washer DIN25 A4,3-40 HV - 4 galznc nut LN Polystop 2 8D placard holder plate Page Date: : September January

11 23 Communications Page Date : 26. January

12 23-50 Audio Integrating PCB Dual COM Page Date : 26. January

13 24 Electrical System Page Date : 26. January

14 24-00 General 0085 ignition switch 3488 toggle switch MS toggle switch MS toggle switch MS toggle switch MS Press-To-Test Indicator Red switch circuit breaker 5 Amp switch circuit breaker 0 Amp switch circuit breaker 40 Amp 3526 circuit breaker Amp 3508 circuit breaker 2 Amp 3507 circuit breaker 3 Amp 3506 circuit breaker 5 Amp 3505 circuit breaker 0 Amp circuit breaker 5 Amp VB relay PCB fuse pre-assembled starter relay bolt DIN933 M5x washer DIN nut LN Page Date: : November January

15 24-30 DC Generation 3726 alternator B&C Model SD-8 4 Volt alternator Regulator PMRC 3727 over voltage kit for SD-8 alternator 4 Volts 0367 battery Concorde RG25 XC LK battery frame for Concorde RG25XC (painted) R-VB L-VB threaded rod RH for battery frame pre-assembled threaded rod LH for battery frame pre-assembled battery Concorde RG-2LSA LK battery frame for Concorde RG25XC (painted) 8C threaded rod LH for battery 2 frame 8C threaded rod LH for battery 2 frame 0046 washer DIN25-5, nut DIN934 M nut LN polystop 8 Page Date: : November January

16 0036 battery relay bolt DIN933 M5x washer DIN nut LN Amperemeter 3567 bolt MS FE4074 Tinnerman NAS Page Date: : November January

17 25 Equipment and Furnishings Page Date : 26. January

18 25-0 Flight Compartment VF seat 008 bolt AN526C032-R special washer VF backrest Pip Pin with cable 4 Page Date : November January LK adjusting tube (painted) bolt LN washer DIN25 M nut LN LK bracket bottom backrest 2 adjustment bolt LN washer DIN902 5,3x5x,2 galznc nut LN Polystop FK0002 (grey) or FK009 (red/blue) and 302- seat belt assy. with single ratchet harness, seatbelt (3 without ratchet / with ratchet). CS924-D crotch strap. H shoulder harness 2

19 3856 (grey) seat belt assy. with double ratchet and harness, seatbelt (2 without 302- ratchet / 2 with ratchet). CS924-D crotch strap. H shoulder harness 2 NL407 bolt LN washer DIN25 M washer DIN902 8,4x stop nut LN bolt AN4-6A 0227 washer DIN902 6,4x stop nut MS document case bolt AN3-3A washer DIN902 M5x eye ball vent bolt MS24693-S27 2 Page Date: : November January

20 27 Flight Controls Page Date : 26. January

21 27-00 General 4C20.00.KBS torquetube assembly 4C LK. torquetube painted bearing RSH/2RSR bolt LN washer DIN988 6 x washer DIN x LK obsolete, replaced by 4C LK. control stick, painted 4C LK. control stick, painted >SC bolt LN washer DIN stop nut LN C rubber handle Page Date: : September January

22 4C torquetube bearing, front bottom 4C torquetube bearing, front top bolt LN washer DIN stop nut LN C torquetube bearing, rear bottom 4C torquetube bearing, rear top bolt LN washer DIN stop nut LN Page Date : 26. January

23 FK004 Torque tube cover leather VB aileron travel stop assembly 2 8C66. reinforcement tube (option) elevator travel stop bolt, front DIN933 M6x nut DIN B M elevator travel stop bolt, rear DIN933 M6x nut DIN B M6 Page Date : 26. January

24 27-0 Aileron & Tab LK control rod 6 520mm (painted) rod ends male threaded nut DIN439 M8 galznc bolt LN washer DIN988 6x washer DIN25-6, nut LN C VS inboard wing bellcrank bolt LN washer DIN25 M stop nut LN bracket washer DIN stop nut LN C50.04 control rod 7 23mm rod ends male threaded nut DIN439 M8 galznc 4 Page Date: : September January

25 00047 bolt LN washer DIN988 6x washer DIN25-6, nut LN LK outboard wing bellcrank bolt LN washer DIN stop nut LN bracket washer DIN stop nut LN LK control rod 8 420mm (painted) rod ends male threaded nut DIN439 M8 galznc bolt LN washer DIN988 6x washer DIN25 6, nut LN C LK linkage with spade arm LH C LK linkage with spade arm RH 0046 washer DIN25 M stop nut LN mashine screw AN R washer DIN25 5 Page Date: : September January

26 C aileron LH C aileron RH bolt LN (outboard 3 hinges) 0046 washer DIN stop nut LN C bracket washer DIN25 M stop nut LN C05.06 bearing housing bolt LN C05.00 bearing with pivot NL429 nut LN NL447 cotter pin LN NL4077 sheet LN bolt LN washer DIN25 M5 3 Page Date: : September January

27 27-20 Rudder & Tab 4C pedal LH pre-assembled bolt AN3-5A washer DIN25 - A 5, HV - galznc nut AN3 (MS2042-3) 4 FB000. master cylinder MATCO MC- 4E bolt LN washer DIN25 - A 5, HV - galznc nut LN Polystop NL0003. bolt LN washer DIN25 - A 6, HV - galznc nut LN Polystop LK. brake pedal LH, painted bearing axle ( D6 x 6 ) bolt LN9038-K washer DIN x 2 x 0, bolt LN (travel stop) washer DIN25 A4, HV - galznc nut LN Polystop LK. S-tube LH painted bolt LN9038-K Page Date: : September January

28 0227. washer DIN902 6,4 x 20 galznc support guide tube support foot rest rear 4C support foot rest front LK. support pedal LH, painted FB. foot rest LH NL4293. bolt DIN933 M5x washer DIN25 - A 5, HV - galznc 4C LK. reinforcement sheet NL4293. bolt LN9438-AM C FB. adjustment tube, short bracket for spring LH NL464. bolt LN washer DIN25 - A 5, HV - galznc spring RZ-47-K-0 4C pedal RH pre-assembled bolt AN3-5A washer DIN25 - A 5,3-40 HV - galznc 8 Page Date: : September January

29 00802 nut AN3 (MS2042-3) 4 FB000. master cylinder MATCO MC- 4E bolt LN washer DIN25 - A 5, HV - galznc nut LN Polystop NL0003. bolt LN washer DIN25 - A 6, HV - galznc nut LN Polystop LK. brake pedal RH, painted bearing axle ( D6 x 6 ) bolt LN9038-K washer DIN x 2 x 0, bolt LN (travel stop) washer DIN25 A4, HV - galznc nut LN Polystop LK. S-tube RH painted bolt LN9038-K washer DIN902 6,4 x 20 2 galznc support guide tube support foot rest rear 4C support foot rest front LK. support pedal RH, painted FB. foot rest RH NL4293. bolt DIN933 M5x25 2 Page Date: : September January

30 0046. washer DIN25 - A 5,3-40 HV - galznc 2 4C LK. reinforcement sheet NL4293. bolt LN9438-AM C FB. adjustment tube, short bracket for spring RH NL464. bolt LN washer DIN25 - A 5, HV - galznc spring RZ-47-K quick release pin with attachment cable rudder control cable kit (included in kit) rudder control cable 2 Page Date: : September January

31 006 cable fairleads 3/4" (two halves) fairlead retaining clips Page Date: : September January

32 27-30 Elevator & Tab 4C50.0 control rod 0 82 mm (painted) rod ends male threaded nut DIN439 M8 galznc bolt LN washer DIN988 6x stop nut LN bolt LN washer DIN988 6x washer DIN25 6, nut LN C03.00-LK rocker type bellcrank 0004 bolt LN washer DIN stop nut LN C50.02 control rod 2235 mm (painted) rod ends male threaded nut DIN439 M8 galznc bolt LN washer DIN988 6x washer DIN25 6, nut LN bolt LN washer DIN988 6x0, washer DIN988 6x, washer DIN25 6, nut LN Page Date: : September January

33 VB bearing bracket elevator bolt LN washer DIN902 M5x washer DIN stop nut LN spacer sleeve bolt LN washer DIN stop nut LN trim switch Trimmzüge 300/SC trim bowden cable (preassembled) VB rear attaching assembly clamp block bolt LN washer DIN stop nut LN Page Date: : September January

34 3668 electric trim system T3-2A bolt DIN92 M3 x 0 4 NL4068 washer LN L stop nut LN C63.00-LK angle sheet 077 AN washer DIN902 5,3 2 8C LK angle sheet 077 AN washer DIN902 5,3 2 4C VB trim lever, pre-assembled Page Date: : September January

35 28 Fuel Page Date : 26. January

36 28-0 Storage 6C VM front center tank, assembly 6C FB metal attachment belt (painted) 6C FB metal attachment belt (painted) stop nut LN washer DIN25 M5 4 6C VM rear center tank, assembly 6C FB metal attachment belt (painted) 6C FB metal attachment belt (painted) stop nut LN washer DIN25 M VB fuel filler front center tank, assembly VB fuel filler center tank (alternative) Page Date : 26. January

37 hose 50mm diam worm drive hose clip 40-60MM bolt AN526C-032-R VB fuel filler rear center tank, assembly VB fuel filler center tank (alternative) hose 50mm diam. Page Date : 26. January

38 03063 worm drive hose clip 40-60MM bolt AN526C-032-R8 4 6C203.0-VM acro tank pre-assembled 6C FB metal attachment belts 2 (painted) stop nut LN washer DIN25 M5 4 6C24.00-VB vent line (acro tank to Fitting) 6C VB vent line (Fitting to rear center tank) 6C VB vent line (rear center tank to overboard) 6C VB vent line (front center tank to overboard) 0056 fitting AN85-4D 6C VB vent and drain lines, set VB vent tube assembly inside wing tank 2 Page Date : 26. January

39 VB vent line (LH Wing Tank -> T- Fitting) VB vent line (RH Wing Tank -> T- Fitting) VB vent line (T-Fitting -> Overboard) 0068 fitting AN824-6D Tee fitting E Reducer 005. spy-rap VB aluminium door wing tank LH with fuel capacity transmitter VB aluminium door wing tank RH reinforcement frame special washer bolt AN3-4A washer DIN25 M bolt DIN933 M5x20 for bonding washer DIN25 M stop nut LN Page Date : 26. January

40 00406 nut DIN934 M fuel filler cap wing tank O-Ring MS standpipe VB retaining nut with sealing lip 2 Page Date : 26. January

41 28-20 Distribution VB fuel selector valve preassembled bolt AN3-3A (secured with Loctite 243) washer DIN902 5,3x5x,2 galznc LK control rod (painted) NL400 bolt LN washer DIN25 A4,3-40 HV - 3 galznc nut LN Polystop bolt LN washer DIN902 5,3x5x,2 2 galznc nut LN Polystop pressure spring fuel selector VD-50C washer DIN25 - A 0,5-40 HV - galznc NA47. bolt MS24693C50 (secured with Loctite 243) gascolator PN attachment bracket grommet MS bolt DIN933 M4x Washer DIN902-4, Washer DIN25-4, Nut LN Page Date : 26. January

42 0207 electric fuel pump attachment bracket clamp NORMA bolt DIN933 M5x washer DIN902-5, washer DIN25-5, nut LN VB wing tank outlet LH & RH Set fuel, oil and instrument lines (PTFE) fitting for floptube (acro tank) floptube weight ( D20 x 60 ) floptube 20mm, 56-6 MIL H fitting AN86-4D nipple 0067 fitting AN823-4D copper seal 4x20x, VB-L wing tank drainer LH assembly Page Date : 26. January

43 VB-R wing tank drainer RH assembly 6C VB drain line (acro tank to drain valve) 6C23.00-VB drain line (T-fitting to drain valve) 6C VB vent and drain lines, set VB drain line gascolator VB drain line electrical fuel pump VB drain line engine driven fuel pump tube ends for drain lines 4 Page Date : 26. January

44 28-40 Indicating 3260 obsolete, replaced by PN 3340 fuel capacity transmitter, front center tank counter flange N (incl. other ) 3340 fuel capacity transmitter, Intellisensor front center tank counter flange N (incl. other ) 0382 Bolt DIN933 M5x30 5 x4,7x0,6 Washer x4,7x0,6 5 Kabelsatz Haupttank Masseband Haupttank wiring, set bonding leads, set 326 obsolete, replaced by PN fuel capacity transmitter, rear center tank fuel capacity transmitter, Intellisensor rear center tank Kabelsatz wiring, set Haupttank counter flange N (incl. other ) 0382 Bolt DIN933 M5x30 5 x4,7x0,6 Washer x4,7x0,6 5 FM4006 fuel capacity transmitter wing tank, float type included Page Date : 26. January

45 2007 obsolete, replaced by PN 3342 fuel capacity indicator wing tanks included 3342 fuel capacity indicator wing tanks included obsolete, replaced by PN 334 fuel capacity indicator center tank included fuel capacity indicator center 2 tank included Page Date : 26. January

46 3 Indicating/ Recording Systems Page Date : 26. January

47 3-0 Instrument and Control Panels 7C02.00 instrument panel (standard) 008 bolt AN526C-032-R special washer 8 Page Date : 26. January

48 3-20 Independant Instruments 0206 G-meter, analogue 3568 bolt MS FE4074 Tinnerman NAS Page Date : 26. January

49 32 Landing Gear Page Date : 26. January

50 32-0 Main Gear 5C LV LK glass fibre U-spring (painting prepared) mounting clamp, top half (black painted) LK mounting clamp, bottom half (black painted) top anti-abrasion strip bottom anti-abrasion strip front anti-abrasion strip 2 >SC rear anti-abrasion strip 2 >SC bolt LN washer DIN25 M stop nut LN Page Date: : September January

51 0320 bolt LN washer DIN25 M stop nut LN axle bolt VM-L wheel fairing holder plate LH (pre-assembled) VM-R wheel fairing holder plate RH (pre-assembled) LK reinforcement plate (black painted) bolt AN4-30A stop nut MS C LV glass fibre tail spring (painting prepared) backing plate (black painted) bolt DIN92 M0x washer DIN25-A 0.5 ND469 washer DIN902-A stop nut LN bolt LN NL40 bolt LN Page Date: : November January

52 0047 washer DIN25-A stop nut LN clamp, cushioned MS299- DG3 5C VS steel sleeve (shoe) bolt LN washer DIN25 M stop nut LN grease nipple DIN3402 M6 Page Date: : November April January

53 32-40 Wheels and Brakes main wheel pre-assembled with 2 tire K spacer ring D44 x d32 x axle nut MS2025/440 -/4" cotter pin MS /8X2 /2" rim and brake 500 x 5 compl. CLEVELAND FF006. tube GOOD YEAR /TR tire PR Flight Special II LV-L wheel fairing LH (painted) LV-R wheel fairing RH (painted) 0 bolt LN lock washer DIN27 M bolt AN3-4A special washer 2 5C VB tail wheel assembly, complete with fork Page Date: : September January

54 32750 Locking pin 3275 Spring Spare retaining pin Large washer elastic stop nut tail wheel fork 5C VB. tail wheel 0307 bolt DIN92 M0x stop nut LN C LH wheel half 5C RH wheel half spacer sleeve bearing solid rubber tire refer to CH EMO 300/SC KBS0 FF0022 FF0006 FF0007 FF007 FF0008 master cylinder and brake pedal pressure hoses, set. pressure hose Knapp HS3AM 650 mm. pressure hose Knapp H3MM 200 mm. pressure hose Knapp HS3AM 860 mm. pressure hose Knapp H3MM 500 mm. plug bolt Knapp M0x für HS Page Date: : September January

55 FF0009. hollow bolt Knapp M8x NX FF00. sealing washer M8x DX Adapter M0x - /8"" NPT Adapter M8x - 7/6""x20 UNF Page Date: : September January

56 32-50 Steering VB steering linkage, tail wheel nut AN30-C bolt AN3-5A washer DIN25 - A 5, HV - galznc steering arm LK. spring-clip black painted shakle AN control cable springs, set NA300. chain connector 2 Page Date: : September January

57 33 Lights Page Date : 5. September

58 33-40 Exterior 8C strobe light assy. 2 ND497 bolt DIN965 M3x washer DIN25-A nut DIN985 M3 2 C cable harness set cable strap 4 FE404 cable strap attachment bracket 4 8C202.0 cover plate 2 Page Date : 5. September

59 34 Navigation Page Date : 26. January

60 34-0 Environment Data pitot tube tip (D6/8 x d6,4 x 45) 7C inner pitot tube 7C outer pitot tube pitot static lines pre-assembled PVC-hose 5x,5mm, 500mm PVC-hose 5x,5mm, 600mm Tee 6 mm MS drain plug Page Date : 26. January

61 0324 Tee 6 mm MS airspeed indicator 3568 bolt MS FE4074 Tinnerman NAS airspeed indicator (metric) 3568 bolt MS FE4074 Tinnerman NAS airspeed indicator (metric) 3568 bolt MS FE4074 Tinnerman NAS airspeed indicator Included in 3455 and 3456 bolt M3,5*25 (thread pitch 0,60) 4 Page Date: : September January airspeed indicator (metric) Included in 3455 and 3456 bolt M3,5*25 (thread pitch 0,60) altimeter 3568 bolt MS

62 FE4074 Tinnerman NAS altimeter (metric) 3568 bolt MS FE4074 Tinnerman NAS altimeter (metric) 3568 bolt MS FE4074 Tinnerman NAS altimeter 3568 bolt MS FE4074 Tinnerman NAS Page Date: : September January

63 34-20 Attitude and Direction 0089 compass Airpath compass Pegasus 3567 bolt MS FE4074 Tinnerman NAS FI0009 slip indicator ND4065 bolt DIN92 M3x ND4042 nut DIN985 M3 V2A 4 Page Date: : September November January

64 5 Standard Practices and Structures - General Page Date : 26. January

65 5-00 Access Panels 345 propeller spinner (3-blade) 3560 propeller spinner (4-blade) 008 screw AN526C032-R special washer VB cowling upper with oil cover VF. cowling upper screw AN526C032-R special washer VF cowling lower 8C VF cowling lower screw AN526C032-R special washer LK air inlet (painted) screw DIN92 4x nut DIN934 M4 4 2C203.0-VF main fuselage cover 008 screw AN526C032-R special washer 24 2C VF bottom fuselage cover 8C VF bottom fuselage cover with window, option. 8C46.02 window Page Date : January November

66 008 screw AN526C032-R special washer 2C VF side cover LH 008 screw AN526C032-R special washer 8 2C VF side cover RH 008 screw AN526C032-R special washer 8 2C VF tail fairing 008 machine screw AN526C R special washer rear fuselage access panel 008 machine screw AN526C R special washer LH/RH wing inboard access panel 2 Page Date : November January

67 LH/RH wing outboard access panel metal sheet screw DIN798 ø3,5x wing tip panel bolt DIN933 M6x washer DIN25 M bolt AN3-3A washer DIN25 M metal sheet screw DIN798 2 ø3,5x LV-L wheel fairing LH VM-L holder sheet LH, wheel fairing 0 bolt LN lock washer DIN27 M bolt AN3-4A special washer LV-R wheel fairing RH 2 Page Date : 26. January

68 VM-R holder sheet RH, wheel fairing 0 bolt LN lock washer DIN27 M bolt AN3-4A special washer 2 Page Date : 26. January

69 5-80 Electrical Bonding Masseband Haupttank Masseband Akrotank bonding leads main tanks, set 2 bonding leads acro tank, set SZ bonding leads fuel filler center tanks 2 C bonding leads wing, set 056 bolt LN washer DIN25 M nut LN C bonding leads aileron control, set C clamp bolt DIN933 M5x washer DIN25 M nut LN bonding leads aileron control, inboard wing bellcrank 2 Page Date : 26. January

70 53 Fuselage Page Date : 26. January

71 53-00 General 2C VB fuselage complete (with fabric, painted) longeron cutout bridge bolt DIN92 M8x washer DIN25 M stop nut LN bolt DIN92 M0x washer DIN25 M stop nut LN VS. shear bridge bolt DIN92 M2x KBS-04. set fuselage fabric VB.. wooden stringer set (painted) NL427. bolt LN washer DIN902 M4x stop nut LN Page Date : 26. January

72 fabric Ceconite 02 70" (.778x2.5 m) paint New Super Seam Cement 0.5 kg varnish.5 kg tooth strip (0.4x5m) 2C VF canopy with locking mechanism LK. handle (painted) sliding window, acryl green sliding bars incl. Screws, set EA300/SR strap Haubengurt NL4256 bolt LN washer DIN902 5,3x5x,2 galznc nut LN Polystop 05 washer DIN902 4,3x2 galznc - gelb ND440 bolt DIN799 M5x50 A nut LN Polystop nut DIN84 M4x25" Page Date : 26. January

73 2C hinge sheet front bolt AN3-3A washer M5 2 2C hinge sheet rear (painted) bolt AN3-3A washer M nut MS C locking sheet front (painted) bolt AN3-3A washer M5 2 2C locking sheet rear (painted) bolt AN3-3A washer M5 2 Page Date : 26. January

74 55 Stabilizers Page Date : 26. January

75 55-00 General 8C LV horizontal tail (painting prepared) 0320 bolt LN NL4037 bolt LN washer DIN25 M stop nut LN C0.000-LV vertical tail (painting prepared) NL499 bolt LN washer DIN25 M0 ND469 washer DIN902 0,5 x 30 A stop nut LN (see also of horizontal stabilizer) (see also of bottom hinge bracket) Page Date : 26. January

76 55-0 Horizontal Stabilizer 8C VF. horizontal stabilizer (see of horizontal tail) Page Date : 26. January

77 55-20 Elevator 8C VF. elevator bolt LN washer DIN25 M stop nut LN VB. bracket (inboard hinge) 0046 washer DIN25 M stop nut LN C VB. bracket (outboard hinge) bolt LN NL4066 washer LN906-05L 4 8C VF. trim tab C Trim tab axle 2 NL45 cotter pin LN Page Date : 26. January

78 55-30 Vertical Stabilizer 3C0.00-VF. vertical stabilizer (see of vertical tail) Page Date : 26. January

79 55-40 Rudder 3C0.020-VF. rudder bolt LN washer DIN25 M stop nut LN bracket (top and center hinge) washer DIN25 M stop nut LN , obsolete. bracket (bottom hinge) 2 replaced by B 0046 washer DIN25 M stop nut LN B. bracket (bottom hinge) 2 > SC washer DIN25 M stop nut LN PA bushing 2 > SC bushing bolt LN washer DIN25 M stop nut LN Page Date: : September January

80 , obsolete replaced by A. bottom hinge bracket preassembled bolt LN washer DIN25 M stop nut LN A. bottom hinge bracket preassembled bolt LN washer DIN25 M stop nut LN > SC 056 Page Date: : September January

81 57 Wing Page Date : 26. January

82 57-00 General C0.000-LV wing with ailerons, painting prepared main spar bolt bolt LN K special aluminium washer washer DIN25 M collar bushing / glue-in-type shim mm with holder as requi red shim,5mm as requi red auxiliary spar bolt LN washer DIN25 M stop nut LN Page Date : 26. January

83 6 Propeller Page Date : 26.January

84 6-00 General Propeller 3-blade MTV-9-B- C/C RACING Propeller 4-blade MTV-4-B- C/C propeller governor (2700 RPM) 3294 propeller governor (2600 RPM) 0209 propeller governor (2700 RPM) refer to Chapter 5 propeller spinner FM0006 vernier control cable A750 8 ft 002 rod end bearing HF bolt AN washer DIN25-5, washer DIN902-5, castle nut AN30-C3 NA4099 cotter pin MS , obsolete, replaced by 6C holder bracket 6C holder bracket >SC bolt AN3-4A 3583 washer AN stop nut MS A Page Date : January November

85 00847 clamp MS299W DG , clamp block obsolete, replaced by 6C bolt AN3-7A 0046 washer DIN25-5, stop nut MS C30.02 clamp blocks 0702 bolt AN3-7A washer DIN25-5, stop nut MS clamp sheet plastic grommet bolt DIN933 M4x washer DIN25-4, stop nut LN Page Date : January November

86 7 Power Plant Page Date : 26. January

87 7-20 Engine Mount LK tubular engine mount assembly painted ( oil cooler system) bolt DIN92 M2x stop nut DIN985 M washer DIN25 M LK sleeve 2 Page Date : 26. January

88 7-60 Air Intakes VB RH front baffle, pre-assembled with rubber 0378 bolt LN washer DIN25 M washer DIN902 M4x stop nut LN bolt UNC 3/8" x 3/4" 0049 washer DIN25 - A 0, lock washer 3/8" STD plug, special barrel nut Lyc VB LH front baffle, pre-assembled with rubber 0378 bolt LN washer DIN25 M washer DIN902 M4x stop nut LN bolt MS washer DIN902 M6x bolt UNC 3/8" x 3/4" 0049 washer DIN25 - A 0, lock washer 3/8" STD plug, special barrel nut Lyc.6564 Page Date : 26. January

89 VB LH side cylinder baffle, preassembled with rubber retaining sheet screw Lyc washer DIN902 M6x VB RH side cylinder baffle, preassembled with rubber retaining sheet screw Lyc washer DIN902 M6x20 6 Page Date : 26. January

90 VB RH side rear baffle, preassembled with rubber 0378 bolt LN washer DIN25 M washer DIN902 M4x stop nut LN holder bracket 0442 rivet AN470AD screw Lyc washer DIN902 M6x bolt UNC 3/8" x 3/4" 0049 washer DIN25 - A 0, lock washer 3/8" STD plug, special barrel nut Lyc VB LH side rear baffle, preassembled with rubber 0378 bolt LN washer DIN25 M washer DIN902 M4x stop nut LN Page Date : 26. January

91 holder bracket 0442 rivet AN470AD bolt UNC 3/8" x 3/4" 0049 washer DIN25 - A 0, lock washer 3/8" STD plug, special barrel nut Lyc VB rear middle baffle, preassembled with rubber holder bracket stiffening rear 0378 bolt LN bolt LN washer DIN25 M washer DIN902 M4x stop nut LN Page Date : 26. January

92 VB threaded rods, set, preassembled Page Date : 26. January

93 72 Engine Page Date : 26. January

94 72-00 General 3429 Lycoming P/N: ENPL- RT0568 or Lycoming P/N: RENPL-RT0568 or Lycoming P/N: HENPL-RT Lycoming P/N: ENPL-RT0427 or Lycoming P/N: RENPL-RT0427 or Lycoming P/N: HENPL-RT0427 Lycoming engine AEIO-580- BA, vacuum drive included Lycoming engine AEIO-580- BA, vacuum drive included Lycoming engine AEIO-580- BA, vacuum drive included Lycoming engine AEIO-580- BA Lycoming engine AEIO-580- BA Lycoming engine AEIO-580- BA stud, ¼-20 x 2-5/8 long gear assy., vacuum pump driven washer, accessory drive gear vacuum pump pad adapter (for alternator) 087 shock mount / Barry Control PN bolt AN7-50A self locking nut AN363C720 4 Page Date: : September January

95 73 Engine Fuel and Control Page Date : 26. January

96 73-20 Controlling 6C LK, obsolete, replaced by 6C30.003B-LK throttle control assembly, painted bolt LN mod. < SC washer DIN25-8,4 NL432 castle nut LN NL448 cotter pin LN bolt LN > SC washer DIN25-8, nut LN C30.003B-LK throttle control assembly, painted DIN DIN933 M6x0 PA DIN988 6x2x0.5 x DIN988 6x2x.2 x bolt LN washer DIN25-8, nut LN C C bolt LN washer DIN25-5, nut LN > SC0 5 Page Date: : September January

97 0665 rubber handle LH shaped , obsolete, replaced by 6C30.02 clamp block (rear) NL4020 bolt LN washer DIN25-5, stop nut LN C30.02 clamp blocks (rear) NL4020 bolt LN washer DIN25-5, stop nut LN obsolete, replaced by PN 3305 throttle control cable 3 m (0 ft) Page Date: : September January

98 3305 obsolete, replaced by PN throttle control cable 2,75 m (9 ft) throttle control cable 2,75 m (9 ft) >SC rod end bearing HF-3 (rear) bolt AN washer DIN902-5, cotter pin MS castle nut AN30-C clamp sheet bolt DIN933 M4x washer DIN25-4, stop nut LN bracket clamp (with Gomolzig exhaust silencer) 0554 attachment clamp bolt AN3-4A 0046 washer DIN25-5, stop nut MS holder bracket for throttle control cable (with Sky Dynamics exhaust silencer) Page Date: : September January

99 , obsolete, replaced by 6C holder bracket for throttle control cable (with Gomolzig exhaust silencer) 6C holder bracket for throttle control cable (with Gomolzig exhaust silencer) >SC , clamp block (front) obsolete, replaced by 6C bolt AN3-7A 0046 washer DIN25-5, stop nut MS C30.02 clamp blocks (front) >SC bolt AN4-7A washer DIN25-5, stop nut MS rod end bearing HF3 (front) 0703 bolt AN washer DIN25-5, washer DIN902-5, castle nut AN30-C3 NA4099 cotter pin MS Page Date: : September January

100 002 mixture control cable A-750, 9 ft clamp sheet plastic grommet 0378 bolt DIN933 M4x washer DIN25-4, stop nut LN , obsolete, replaced by 6C holder bracket for mixture control cable bolt MS , clamp block (front) obsolete, replaced by 6C bolt AN3-7A 0046 washer DIN25-5, stop nut MS C holder bracket for mixture control cable bolt MS >SC 03 Page Date: : September January

101 6C30.02 clamp blocks (front) >SC bolt AN4-7A washer DIN25-5, stop nut MS rod end bearing HF bolt AN washer DIN25-5, washer DIN902-5, castle nut AN30-C3 NA4099 cotter pin MS Page Date: : September January

102 73-30 Indicating manifold pressure / fuel pressure indicator 3568 bolt MS FE4074 Tinnerman NAS FF0007 KNAPP hose 860 mm firewall 2 to fuel/manif. press. instr Filter (MAP only) adapter M8x - /8" NPT FF0009 hollow bolt M8x NX.0546 FF00 sealing washer M8x DX FF0008 plug bolt KNAPP Page Date: : September January

103 adapter M0x - 7/6x20 UNF 0080 washer AN960-C nut AN924-04D reinforcement plate 6C hose manifold pressure 40mm, engine to firewall 6C20.00 hose fuelflow 325mm, firewall to baffle 0074 bulkhead fitting AN837-4D 0078 nut AN924-4D 0080 washer AN960C76 NA4250 washer AN960C76L 6C hose fuelflow 690mm, baffle to injection manifold hose clamp bolt AN3-4A 87 nut MS A NA426 Washer NAS49F0332R reducerfitting PG fuel flow EDM 800-6C (with all sensors), package Page Date: : September January

104 77 Engine Indicating Page Date : 26. January

105 77-0 Power RPM indicator digital (2700 RPM) RPM indicator digital (2600 RPM) ND4254 bolt DIN 92 M4 x 2 V2A nut DIN 934 M4 4 Page Date : November January

106 77-20 Temperature EGT/CHT instrument EGT/CHT instrument 3567 bolt MS Page Date : November January

107 78 Exhaust Page Date : 26. January

108 78-00 General 3389 exhaust system assembly, complete except heat shroud, Gomolzig 3253 Exhaust system heat shroud with 2 flanges or exhaust system heat shroud with 3 flanges (for cabin heat system) Option 300/SC KBS04 exhaust system assembly, complete, Sky Dynamics 6in, option exhaust system assembly 6in, Sky Dynamics. 8C bracket for throttle cable. 8C rubber 2. 8C bracket exhaust LH. 8C bracket exhaust RH. 8C LK connection sheet, welded and painted. 8C LK connection sheet, welded and painted bolt LN Page Date: : September January

109 bolt LN washer DIN25 - A 5, HV - galznc" washer DIN902 C nut LN Polystop bolt AN washer DIN25 - A 5,3-40 HV - galznc" washer DIN902 C nut AN30-C cotter pin MS C exhaust system assembly, complete, Chabord 6in2, option exhaust system assembly 6in2, Chabord bolt LN washer DIN25-5, nut LN Polystop nut Chabord 2. 8C bracket for throttle cable. 8C bracket exhaust LH. 8C bracket exhaust RH Page Date: : September January

110 79 Oil Page Date : 26. January

111 79-20 Distribution 347 oil cooler VB oil cooler connection set fuel, oil and instrument lines (PTFE) additional oil cooler (option). 8C720.0 assy. additional oil cooler oil cooler. 8C720.2 oil hose re cooler -> fr cooler. 8C oil hose fr cooler -> engine Page Date: : November January

112 79-30 Indicating adapter /8 NPT - 7/6 UNF 0080 washer AN960-C nut AN924-04D reducerfitting FI3002 oil pressure / oil temperature kit oil pressure / oil temperature kit 3567 bolt MS Page Date : November January

113 96 Smoke Page Date : 26. January

114 96-00 General 8C2.000 Smoke System. 8C.00-VM smoke tank. 8C.03-0-FB metal attachment belt (painted) front. 8C FB metal attachment belt (painted) rear. 8C3.00 smoke injector for Sky Dynamics 6-in- exhaust smoke injector for Gomolzig exhaust LK mounting plate smoke pump Page Date : 26. January

115 drain tube. 8C5.00 vent line, smoke tank. 8C5.090 drain line, smoke tank. 8C5.020 oil line, pump to valve. 8C5.030 oil line, tank to pump. 8C5.080 oil line, filter to fitting hose, refill (pump) hose, refill bus, 9 holes. 8C6.030 hose, connection to exhaust 8C2.00 Smoke System Chabord 6-in-2. 8C.00-VM smoke tank. 8C.03-0-FB metal attachment belt (painted) front. 8C FB metal attachment belt (painted) rear Page Date : November January

116 smoke injector for Chabord 6- in-2 exhaust LK mounting plate smoke pump drain tube. 8C5.00 vent line, smoke tank. 8C5.090 drain line, smoke tank. 8C5.020 oil line, pump to valve. 8C5.030 oil line, tank to pump. 8C5.080 oil line, filter to fitting hose, refill (pump) hose, refill bus, 9 holes fitting AN822-6D elbow Page Date : January November

117 fitting AN86-4D nipple Distribution block bolt LN washer DIN902-5, washer DIN25-5, nut LN C2.020 hose, connection to distribution block. 6C hose, connection to smoke injection nozzle 2 Page Date : November January