TECHNICAL DESCRIPTION
|
|
|
- Jonathan Norman
- 5 years ago
- Views:
Transcription
1
2 TECHNICAL DESCRIPTION The renewed ETN-Lined pumps are singlestage, magnetic driven, centrifugal pumps in closecoupled execution. ETN-Lined pumps are available both inpp+gf and ETFE. The pump casing is integrali lined,manufactured with the CDR ILS (Integral Lined System) technology. This is a particular transfer moulding technology that allows to mould the corrosion resistant layer directly on the metallic shell, providing optimal grip as well as elevated mechanical and corrosion resistance. The LF Graphite bush configuration, with its low friction coefficient, combined with CDR FTC exclusive balancing system of the internal magnet (Full Thrust Control), allow to withstand occasional dry running periods up to one hour. On the other hand, the SiC version allows the use of ETN-Lined pumps with particularly aggressive and abrasive liquids. The magnetic coupling with neodymium-iron-boron magnets insures a sealless, zero-leakage pumping solution. Last but not least, ETN-Lined pumps feature a most appealing price/quality level for both end users and OEMs. HYDRAULIC PERFORMANCES This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorizatio ETN -EN- DT Rev.2
3 FEATURES AND APPLICATIONS FEATURES AND APPLICATIONS Pump type Materials Handled liquids Hydraulic performances Drives Temperature range System pressure ratings Viscosity Solids.. DESCRIPTION Close coupled centrifugal pump PP-GF / ETFE with "ILS" technology Corrosive, inflammable and toxic liquids Q max=80 m3/h H=34m from 0,75 kw (gr. 80) to 7.5 kw (gr. 132) from -20 C to +90 C PP-GF from -10 C=PN 6 to 80 C=PN 2 ETFE from -20 C=PN 6 to 90 C=PN cst max 2% max concentration in weight Hardness max 800 Vk Size max 150 µm DRY RUNNING PROTECTION FEATURES "FTC" (Full Thrust Control) CDR System Features Shaft material Bushing material Materials Working time with unprimed pump Working time with dry pump Description AL2O3 99,7 % Ceramic Graphite LF PP-GF / ETFE 1 h 2 h Note: Liquid used for testing: water. Bushing wear after test: insignificant dimensional change This document is exclusive property of C.D.R. Pompe S.p.A. The same cannot be transferred to any third part without prior C.D.R. Pompe S.p.A. written authorizatio ETN -EN- DT Rev.3
4 MAX TEMPERATURES AND PRESSURE ETN -EN- DT Rev.2
5 PARTS INTERCHANGEABILITY TABLE Pump Motor Pump casing Isolation shell Isolant shell cover Shaft Size size ,1 151, /01/0M 9420/13/0M 9410/32/0M 1820/03/0M /01/0M 9420/13/0M 9410/32/0M 1820/03/0M / /01/0M 9420/13/0M 9410/32/0M 1820/03/0M /01/0M 9420/13/0M 9410/32/0M 1820/03/0M /01/0M 9420/13/0M 9410/32/0M 1820/03/0M / /01/0M 9420/13/0M 9410/32/0M 1820/03/0M /01/0M 9420/13/0M 9410/32/0M 1820/03/0M /_01/0M 9420/13/0M 9410/32/0M 1820/03/0M /_01/0M 9420/13/0M 9410/32/0M 1820/03/0M / /_01/0M 9420/13/0M 9410/32/0M 1820/03/0M /_01/0M 9420/13/0M 9410/32/0M 1820/03/0M Pump Motor Impeller Rotating bushing Axial thrust shoe Lantern Support flange Size size , /C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9420/10/0M /C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9420/10/0M / /C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* /C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9420/10/0M /C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9420/10/0M / /C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* /C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9425/03/0M /C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9420/10/0M /C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9420/10/0M / /C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* /C3/0M 1820/05/0M 1820/04/0M 9420/07/0M16* 9425/03/0M02 * Lantern with incorporated flange cod.9420/19/0m18 Pump Size Motor size Casing gasket Rotating bushing gasket Pump lantern flange Safety ring Adapting ring 412,1 412,2 500, , /4725M 130/2131M /09/0M02** 9420/15/0M /4725M 130/2131M /09/0M02** 9420/15/0M / /4725M 130/2131M /09/0M02** 9420/15/0M /4725M 130/2131M /09/0M02** 9420/15/0M /4725M 130/2131M /09/0M02** 9420/15/0M / /4725M 130/2131M /09/0M02** 9420/15/0M /4725M 130/2131M /09/0M02** 9420/15/0M /4800M 130/2131M /09/0M02** 9420/15/0M /04/0M /4800M 130/2131M /09/0M02** 9420/15/0M /04/0M / /4800M 130/2131M /09/0M02** 9420/15/0M /04/0M /4800M 130/2131M /09/0M02** 9420/15/0M /04/0M44 ** With lantern cod.9420/19/0m18 pump lantern flange has to be removed Pump Motor Spacer Spacer. Washer External magnet Suction cover Size size 505,1 505,2 550, /12/0M08*** 9420/16/0M /42/0M /C1/AM /03/0M /12/0M08*** 9420/11/0M /41/0M /C1/BM /03/0M / /12/0M08*** /45/0M /C1/CM /03/0M /12/0M08*** 9420/16/0M /42/0M /C1/AM /02/0M /12/0M08*** 9420/11/0M /41/0M /C1/BM /02/0M / /12/0M08*** /45/0M /C1/CM /02/0M /12/0M08*** /01M /C1/0M /02/0M /12/0M08*** 9420/16/0M /42/0M /C1/AM /03/0M /12/0M08*** 9420/11/0M /41/0M /C1/BM /03/0M / /12/0M08*** /45/0M /C1/CM /03/0M /12/0M08*** /01M /C1/0M /03/0M43 *** With lantern cod.9420/19/0m18 spacer has to be removed ETN EN -DT -04 -Rev.3-
6 OVERALL DIMENSIONS - MOTOR SIZE 80/90/100/112/132 General dimensions Pump type Dna DNm a Motor Motor dimensions L1 Size f1 TEFC ADPE ETN UNI 2223/29 PN UNI 2223/29 PN B5 175, ANSI B RF ANSI B RF 90 B5 175, ETN UNI 2223/29 PN UNI 2223/29 PN ANSI B RF ANSI B RF 100 B5 175, ETN UNI 2223/29 PN UNI 2223/29 PN B5 175, ANSI B RF ANSI B RF 132 B5 193, Pump weight Pump weight (Kg) Size Motor weight (Kg) Pump weight with motor (Kg) TEFC Eex TEFC Eex ETN ,5 24,4 51,5 56,4 ETN ,5 34,5 56,5 66,5 ETN , ,5 72 ETN ETN ETN ,5 24,4 51,5 56,4 ETN ,5 34,5 56,5 66,5 ETN , ,5 72 ETN ETN ETN ,5 24,4 56,5 61,4 ETN ,5 34,5 61,5 71,5 ETN , ,5 77 ETN ETN ETN -EN- DDI Rev.2
7 OVERALL DIMENSIONS ON ETN BASE - MOTOR SIZE 80/90/100/112/132 General dimensions Pump type Dna DNm a Motor Motor dimensions L1 Size f1 TEFC ADPE ETN UNI 2223/29 PN UNI 2223/29 PN B5 175, ANSI B RF ANSI B RF 90 B5 175, ETN UNI 2223/29 PN UNI 2223/29 PN ANSI B RF ANSI B RF 100 B5 175, ETN UNI 2223/29 PN UNI 2223/29 PN B5 175, ANSI B RF ANSI B RF 132 B5 193, Pump weight Pump weight (Kg) Size Motor weight (Kg) Pump weight with motor (Kg) TEFC Eex TEFC Eex ETN ,5 24,4 51,5 56,4 ETN ,5 34,5 56,5 66,5 ETN , ,5 72 ETN ETN ETN ,5 24,4 51,5 56,4 ETN ,5 34,5 56,5 66,5 ETN , ,5 72 ETN ETN ETN ,5 24,4 56,5 61,4 ETN ,5 34,5 61,5 71,5 ETN , ,5 77 ETN ETN Pump type Baseplate weight (Kg) ETN ETN ETN ETN -EN- DDI Rev.2
8 EXPLODED VIEW ETN -EN- DDI Rev.2
9 3D DRAWING PP-GF PUMP MOTOR SIZE 80/90 ETN -EN- DIS Rev.2
10 2D DRAWING PP-GF PUMP MOTOR SIZE 80/90 ETN -EN- DIS Rev.2
11 PART LIST PP-GF PUMP MOTOR SIZE 80/90 Ref Qty Description Materials Pump casing PP nodular cast iron lined Suction cover ETFE 151,1 1 Isolation shell PP-GF 151,2 1 Isolation shell cover PC-CF Shaft AL2O3/SiC Impeller PP Rotating bushing Graphite LF/SiC/AL2O3+PTFE Axial thrust shoe AL2O3* / SiC* Lantern Nodular cast iron 341,1 1 Support flange Carbon steel 412,1 1 Gasket FPM/EPDM/FFKM 412,2 2 Gasket PTFE 500,1 1 Lantern flange** Carbon steel Safety ring Bronze 505,1 2 Spacer** AISI ,2 1 Spacer Carbon steel 550,1 4 Washer AISI ,2 1 Washer AISI ,3 4 Washer AISI External magnet NdFeB Screw AISI ,1 4 Screw AISI ,2 2 Screw AISI ,3 6 Screw** AISI Stud AISI Nut AISI 304 * + PFA ring shock absorbing version **If the lantern incorporates the flange, part numbers 500,1_505,1_901,3 have to be removed ETN -EN- DIS Rev.3
12 3D DRAWING PP-GF PUMP MOTOR SIZE 100/112 ETN -EN- DIS Rev.2
13 2D DRAWING PP-GF PUMP MOTOR SIZE 100/112 ETN -EN- DIS Rev.2
14 PART LIST PP-GF PUMP MOTOR SIZE 100/112 Ref Qty Description Materials Pump casing PP nodular cast iron lined Suction cover ETFE 151,1 1 Isolation shell PP-GF 151,2 1 Isolation shell cover PC-CF Shaft AL2O3/SiC Impeller PP Rotating bushing Graphite LF/SiC/AL2O3+PTFE Axial thrust shoe AL2O3* / SiC* Lantern Nodular cast iron 412,1 1 Gasket FPM/EPDM/FFKM 412,2 2 Gasket PTFE 500,1 1 Lantern flange** Carbon steel Safety ring Bronze 505,1 2 Spacer** AISI ,1 4 Washer AISI ,2 1 Washer AISI ,3 4 Washer AISI External magnet NdFeB Screw AISI ,1 4 Screw AISI ,2 2 Screw AISI ,3 6 Screw** AISI ,4 4 Screw AISI 304 * + PFA ring shock absorbing version **If the lantern incorporates the flange, part numbers 500,1_505,1_901,3 have to be removed ETN -EN- DIS Rev.3
15 3D DRAWING PP-GF PUMP MOTOR SIZE 132 ETN -EN- DIS Rev.2
16 2D DRAWING PP-GF PUMP MOTOR SIZE 132 ETN -EN- DIS Rev.2
17 PART LIST PP-GF PUMP MOTOR SIZE 132 Ref Qty Description Materials Pump casing PP nodular cast iron lined Suction cover ETFE 151,1 1 Isolation shell PP-GF 151,2 1 Isolation shell cover PC-CF Shaft AL2O3/SiC Impeller PP Rotating bushing Graphite LF/SiC/AL2O3+PTFE Axial thrust shoe AL2O3* / SiC* Lantern Nodular cast iron 341,1 1 Support flange Carbon steel 412,1 1 Gasket FPM/EPDM/FFKM 412,2 2 Gasket PTFE 500,1 1 Lantern flange** Carbon steel Safety ring Bronze 505,1 2 Spacer** AISI ,1 4 Washer AISI ,2 1 Washer AISI ,3 4 Washer AISI External magnet NdFeB Screw AISI ,1 4 Screw AISI ,2 2 Screw AISI ,3 6 Screw** AISI ,4 4 Screw AISI ,1 4 Inner exagon screw AISI 304 * + PFA ring shock absorbing version **If the lantern incorporates the flange, part numbers 500,1_505,1_901,3 have to be removed ETN -EN- DIS Rev.3
18 3D DRAWING ETFE PUMP MOTOR SIZE 80/90 ETN -EN- DIS Rev.2
19 2D DRAWING ETFE PUMP MOTOR SIZE 80/90 ETN -EN- DIS Rev.2
20 PART LIST ETFE PUMP MOTOR SIZE 80/90 Ref Qty Description Materials Pump casing ETFE nodular cast iron lined Suction cover ETFE 151,1 1 Isolation shell ETFE 151,2 1 Isolation shell cover PC-CF Shaft AL2O3/SiC Impeller ETFE Rotating bushing Graphite LF/SiC/AL2O3+PTFE Axial thrust shoe AL2O3* / SiC* Lantern Nodular cast iron 341,1 1 Support flange Carbon steel 412,1 1 Gasket FPM/EPDM/FFKM 412,2 2 Gasket PTFE 500,1 1 Lantern flange** Carbon steel Safety ring Bronze 505,1 2 Spacer** AISI ,2 1 Spacer Carbon steel 550,1 4 Washer AISI ,2 1 Washer AISI ,3 4 Washer AISI External magnet NdFeB Screw AISI ,1 4 Screw AISI ,2 2 Screw AISI ,3 6 Screw** AISI Stud AISI Nut AISI 304 * + PFA ring shock absorbing version **If the lantern incorporates the flange, part numbers 500,1_505,1_901,3 have to be removed ETN -EN- DIS Rev.3
21 3D DRAWING ETFE PUMP MOTOR SIZE 100/112 ETN -EN- DIS Rev.2
22 2D DRAWING ETFE PUMP MOTOR SIZE 100/112 ETN -EN- DIS Rev.2
23 PART LIST ETFE PUMP MOTOR SIZE 100/112 Ref Qty Description Materials Pump casing ETFE nodular cast iron lined Suction cover ETFE 151,1 1 Isolation shell ETFE 151,2 1 Isolation shell cover PC-CF Shaft AL2O3/SiC Impeller ETFE Rotating bushing Graphite LF/SiC/AL2O3+PTFE Axial thrust shoe AL2O3* / SiC* Lantern Nodular cast iron 412,1 1 Gasket FPM/EPDM/FFKM 412,2 2 Gasket PTFE 500,1 1 Support flange** Carbon steel 505,1 2 Spacer** AISI ,1 4 Washer AISI ,3 4 Washer AISI ,4 1 Washer AISI External magnet NdFeB 900,1 1 Screw AISI ,1 4 Screw AISI ,3 6 Screw** AISI ,4 4 Screw AISI 304 * + PFA ring shock absorbing version **If the lantern incorporates the flange, part numbers 500,1_505,1_901,3 have to be removed ETN -EN- DIS Rev.3
24 3D DRAWING ETFE PUMP MOTOR SIZE 132 ETN -EN- DIS Rev.2
25 2D DRAWING ETFE PUMP MOTOR SIZE 132 ETN -EN- DIS Rev.2
26 PART LIST ETFE PUMP MOTOR SIZE 132 Ref Qty Description Materials Pump casing ETFE nodular cast iron lined Suction cover ETFE 151,1 1 Isolation shell ETFE 151,2 1 Isolation shell cover PC-CF Shaft AL2O3/SiC Impeller ETFE Rotating bushing Graphite LF/SiC/AL2O3+PTFE Axial thrust shoe AL2O3*/SiC* Lantern Nodular cast iron 341,1 1 Support flange Carbon steel 412,1 1 Gasket FPM/EPDM/FFKM 412,2 2 Gasket PTFE 500,1 1 Support flange** Carbon steel Safety ring Bronze 505,1 2 Spacer** AISI ,1 4 Washer AISI ,2 1 Washer AISI ,3 4 Washer AISI External magnet NdFeB Screw AISI ,1 4 Screw AISI ,2 2 Screw AISI ,3 6 Screw** AISI ,4 4 Screw AISI ,1 4 Inner exagon screw AISI 304 * + PFA ring shock absorbing version **If the lantern incorporates the flange, part numbers 500,1_505,1_901,3 have to be removed ETN -EN- DIS Rev.3
TECHNICAL DESCRIPTION
TECHNICAL DESCRIPTION pumps are Hi-Tech single stage, horizontal centrifugal pumps with magnetic driven coupling. In compact and silent close-coupled execution, they can be mounted on to B5 frame motors.
Series SR Compact Centrifugal Mag-Drive Pumps. WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec
WARRENDER, LTD. Process & OEM Pumps From Stock or Built-to-Spec Series SR Compact Centrifugal Mag-Drive Pumps Providing environmentally safe sealless, magnetic pumps of the highest quality for over 30
3020/3120 Series DEMING PUMPS. Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet
3020/3120 Series Frame-mounted and close-coupled Enclosded and semi-enclosed impeller Capacities to 4,000 GPM Heads to 780 feet A Crane Co. Company DEMING PUMPS Introducting Deming 3020/3120 Series End-Suction
Goulds Large Capacity, Single Stage, Double Suction Pump
Goulds 3498 Large Capacity, Single Stage, Double Suction Pump 3498 Double Suction Pumps Designed for a Wide Range of Heavy Duty Industrial, Marine and Power Generation Services Capacities to 8,00 m 3 /h
CAST IRON IMPELLER B4JRMBH. TYPE B SINGLE STAGE CENTRIFUGAL PUMP Bearing Frame Mount TABLE I
Page 90. Date January, 004 Supersedes //95 B4JRMBH Packing Construction 3 9 3 8 Volute Impeller B/M No. Rotation Case Impeller Diameter B3 CW H03843 L059 3.50 B33 CCW H03848 L0594 3.50 8 00 095 3 See Supplement
CombiChem Centrifugal pumps. according to ISO 5199 and ISO 2858 / EN (DIN 24256)
CombiChem Centrifugal pumps according to ISO 5199 and ISO 2858 / EN 22858 (DIN 225) CombiChem No limits to reliability! CombiChem is Johnson Pump s solution for liquid transport in the chemical industry.
CombiBloc Close-coupled centrifugal pumps
CombiBloc Close-coupled centrifugal pumps CombiBloc CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of Johnson Pump s Combi-system, a modular
DS series STERLING PUMPS. Industrial End Suction Pumps ISO/DP
DS series Industrial End Suction Pumps ISO/DP 5199 www.sterlingpumps.com.au DS series Capacities from: Heads from: 340 to 5,680 m3/h (1,500 to 25,000 USPGM) 21 to 106 metres (70 to 350 feet) Power range
MODEL 652A MODEL 654A MODEL 652A MODEL 653A MODEL 651A AURORA. 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS
MODEL 652A MODEL 654A MODEL 652A MODEL 651A MODEL 653A AURORA 650 Series SINGLE STAGE SOLIDS HANDLING PUMPS WWW.AURORAPUMP.COM 2 AURORA 650 Series Single Stage Solids Handling Pumps Capacities to 2000
MARINE. High efficiency pumps you can rely on
DESMI MARINE PUMPS High efficiency pumps you can rely on Vertical In-Line Pumps - Mainstream Designs Our latest design in vertical in- Double suction pumps for the Pumps for the low capacities. line pumps.
MAGNETIC DRIVE PUMPS AMERICA S MOST VERSATILE LINE OF CENTRIFUGAL PUMPS THINK QUALITY...THINK DELIVERY...THINK PRICE
MAGNETIC DRIVE PUMPS AMERICA S MOST VERSATILE LINE OF CENTRIFUGAL PUMPS THINK QUALITY...THINK DELIVERY...THINK PRICE Seal-less Design Price Pump magnetically driven, seal-less pumps provide a leak-proof
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
Combi Modular System. Standardised centrifugal pumps EN 733 ISO 2858 ISO 5199 API 610
Combi Modular System Standardised centrifugal pumps EN 733 ISO 2858 ISO 5199 API 610 SPX FLOW Johnson Pump brand water, chemical and petrochemical standardised pumps represent a range of centrifugal pumps
HTM Circulation Pumps acc. to DIN EN 733 Type NKX
HTM Circulation Pumps acc. to DIN EN 733 Type NKX General The new NKX pump line replaces our former heat transfer oil circulation pump type NKL s. The outer dimensions of both pump types are identical
Full-line Product Overview
Full-line Product Overview End Suction Centrifugal Pumps This general purpose pump can be configured in frame-mounted and close-coupled, semi-open and enclosed impeller configurations. They are available
CombiChem. Centrifugal pumps according to ISO 5199 and ISO 2858 / EN (DIN 24256)
CombiChem Centrifugal pumps according to ISO 199 and ISO 88 / EN 88 (DIN 46) The SPX Johnson Pump Combi system is a modular programme of single stage CombiChem No limits to reliability! centrifugal pumps
LN series STERLING PUMPS. Horizontal Split Case Pumps. Double Volute. Single Stage.
LN series Horizontal Split Case Pumps Double Volute. Single Stage www.sterlingpumps.com.au LN series Sizes: 6 to 42 Capacity to 12,500 m³/h Heads to 190 metres A rugged, single stage, double volute horizontal
DNJ SERIES PUMPS END SUCTION CLOSE COUPLED
DNJ SERIES PUMPS END SUCTION CLOSE COUPLED DNJ SERIES PUMPS These are close coupled with standard JM solids shaft ball bearing motors specially designed for pump applications in accordance with standards
our contribution for Sealless Magnetic Coupled, Heavy Duty Side-Channel Pumps environmental protection Type SCM PN40
Sealless Magnetic Coupled, Heavy Duty Side-Channel Pumps our contribution for environmental protection Type SCM PN40 General The DICKOW-pump, type SCM, is a selfpriming horizontal side-channel pump with
Dean Pump High Temperature Chemical Process Inline Pumps
Bulletin C-1.2.21. Dean Pump High Temperature Chemical Process Inline Pumps Series DL Dean Pump Series DL High Temperature Chemical Process Inline Pumps Capacities to 600 GPM (182 m 3 /hr) Heads to 0 feet
B. HI Compliance: Design, manufacture, and install pumps in accordance with HI "Hydraulic Institute Standards."
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
FLANGE-MOUNT CENTRIFUGAL PUMPS
40 Third Street Piqua, Ohio 4556-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES GV6 SECTION E PAGE ISSUED /0 REPLACES /0 FLANGE-MOUNT CENTRIFUGAL PUMPS Idel for OEM applications
CAP SERIES SEWAGE AND WASTE WATER PUMPS
Part 8 CAP SERIES SEWAGE AND WASTE WATER PUMPS TECHNICAL SPECIFICATIONS : Turbosan CAP series consists of centrifugal sewage and waste water pumps. They are used for pumping muddy liquids like sewage and
PREMIUM MAGNETIC-DRIVE SEALLESS CENTRIFUGAL PUMPS DB & SP SERIES
PREMIUM MAGNETIC-DRIVE SEALLESS CENTRIFUGAL PUMPS PUMPING SOLUTIONS AROUND THE WORLD QLVKWKRPSVRQ FRP DB SERIES SP SERIES MAGNETIC DRIVE, SEALLESS, CENTRIFUGAL PUMPS DB SERIES FLOODED SUCTION Backed by
End-Suction Centrifugal Pump
GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM
End-Suction Centrifugal Pump
GH End-Suction Centrifugal Pump GH Horizontal end-suction pump for handling water, oils and chemicals in marine, process and general industrial applications. Hydraulic performance extends to 2,500 GPM
Metering & Thrust Gear Pumps. apompe.eu
Metering & Thrust Gear Pumps Cast Iron (G25) aly It o, lan 0 09 7 i3 n do N S/ a zz re,t no 20 i,m l m po @ a ltr r dd,a.it a ltr Go s es pe ia :V u :u -m,e 4 46-0 39-0 39 + :+ x Fa 45 46 8 24, 52 + :+
D. NEMA Compliance: Provide electric motors and components which comply with NEMA standards.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
KC22/32 SERIES Sealless Non-Metallic Centrifugal Pumps Installation and Maintenance Instructions
KC22/32 SERIES Sealless Non-Metallic Centrifugal Pumps Installation and Maintenance Instructions ASSEMBLY Unpack pump from carton and check for shipping damage. WARNING: Magnetic field hazard. This pump
Horizontal Split Case Pumps Type U
Horizontal Split Case Pumps Type U 7.1 7.2 Stage U Type Pumps Features: Axially Split Case Design Range from 20M 3 /Hr to 600M 3 /Hr Two Stage Pump Single Suction Twin Volute Casing Design Closed type
MCV - MCH - MCHZ Multistage pumps
MCV - MCH - MCHZ Multistage pumps You can put pressure on them! We offer you a range of reliable high-pressure multistage pumps. It includes a series of horizontal pumps, MCH and a series of vertical pumps,
Upompe Primeflo XP7 chemical self-priming centrifugal pumps
Upompe Primeflo XP7 chemical self-priming centrifugal pumps 1 Design Introduction: These Upompe Primeflo XP7 self-priming pump are heavy-duty design for rugged application and constructed to handle corrosive,
CombiBloc. Close-coupled centrifugal pumps
CombiBloc Close-coupled centrifugal pumps CombiBloc is the premier solution for pumping clean thin liquids in a very cost-effective way. The pump is part of SPX FLOW 's Johnson Pump brand Combi-system,
GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM
GH Series End Suction Centrifugal Pumps For Flows to 2,500 GPM The GH Series The GH is Carver s horizontal, end suction pump series for handling water, oils, and chemicals in marine, process, and general
Pumps Mixers Aeration Controls Services SCANPUMP PROCESS PUMPS, BE SERIES. NO-COMPROMISE PUMPING.
Pumps Mixers Aeration Controls Services SCANPUMP PROCESS PUMPS, BE SERIES. NO-COMPROMISE PUMPING. www.scanpump.com PURPOSE-BUILT FOR PULP AND PAPER. 2 In many ways, paper is a wonderfully simple material.
FAN ENGINEERING. Sealing of Fan Housings
FAN ENGINEERING Information and Recommendations for the Engineer FE-700 Sealing of Fan Housings Introduction A variety of options are offered by fan manufacturers to seal fan housings. Sealing the housing
EVMSU - Vertical Multistage Pumps. Product Catalog
EVMSU - Vertical Multistage Pumps Product Catalog www.pumpsebara.com Built like a Kata a A Katana is a traditional Japanese sword made with distinctive, longstanding expertise started in 300 A.D. Katana
A. ASME Compliance: Fabricate and install hydronic piping in accordance with ASME B31.9 "Building Services Piping.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Specially Designed Waste Water & Sewage Pumps
Specially Designed Waste Water & Sewage Pumps Technical specifications Ebitt SC series consists of centrifugal sewage and waste water pumps. They are used for pumping muddy liquids like sewage and other
KC22/32 SERIES Sealless Non-Metallic Centrifugal Pumps Installation and Maintenance Instructions
KC22/32 SERIES Sealless Non-Metallic Centrifugal Pumps Installation and Maintenance Instructions ASSEMBLY Unpack pump from carton and check for shipping damage. WARNING: Magnetic field hazard. This pump
MODEL 664A MODEL 662A MODEL 663A MODEL 661A AURORA. 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS
MODEL 662A MODEL 664A MODEL 661A MODEL 663A AURORA 660 Series SINGLE STAGE SOLIDS HANDLING VORTEX PUMPS WWW.AURORAPUMP.COM 2 AURORA 660 Series Single Stage Solids Handling Vortex Pumps Capacities to 2600
MARLOW PUMPS RECIRCULATION
End suction centrifugal pump line available in both close coupled and frame mounted configurations allow users to meet exactly most flow conditions on commercial pool and waterpark applications. Features
1 1/8 Inch Centrifugal Pump Operation and Maintenance Guide
1 1/8 Inch Centrifugal Pump Operation and Maintenance Guide Installation Location! The pump should be located as close as possible to the liquid source so that the suction line can be as short and direct
CR5-9 A-FGJ-A-E-HQQE 1x220/240 50HZ
GRUNDFOS DATA BOOKLET CR5-9 A-FGJ-A-E-HQQE 1x2/24 5HZ Grundfos Pump 96537532 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96537532/cr-5-9-a-fgj-a-e-hqqe.html
Technical Parameter: Suction Diameter: 40~250 mm Discharge Diameter: 25~200 mm
HEGA Horizontal Multistage Pump Brief Introduction HEGAHorizontal Multistage Pump is the new multistage product series, the excellent hydraulic performance and structure of which have enabled low cost
CR A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR32--2 A-F-A-E-HQQE 3x/69 5 HZ Grundfos pump 9612212 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/9612212/cr-32--2-a-f-a-e-hqqe.html
DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION PUMPS
PART 0 A/E INSTRUCTIONS 0.01 Design Requirements A. Pumping system design 1. A primary-secondary pumping system is preferred. Redundant pipes are required for chillers and boilers. 2. Select pumps to operate
Blockpumps. Vogel Series LSB. Lenntech. Tel Fax
Lenntech info@lenntech.com Tel. +31-152-610-900 www.lenntech.com Fax. +31-152-616-289 Blockpumps Vogel Series LSB WITH HYDRAULICS ACCORDING TO ISO 2858 Technical Data Performance: m Capacity up to 450m
CR20-07 A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR2-7 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos pump 965513 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/crfam/965513/cr-2-7-a-f-a-e-hqqe.html
Goulds 3600 Between-Bearing, Axially-Split, Multi-Stage Pumps. Goulds Pumps
Between-Bearing, Axially-Split, Multi-Stage Pumps Goulds Pumps A Leader in API Engineered Pump Package Solutions Proven API Leadership ITT Goulds Pumps is a proven leader in API Pumps Over 18,000 units
Centrifugal Pump Efficiency Improvement Alternate Methods and Design Methodology
Centrifugal Pump Efficiency Improvement Alternate Methods and Design Methodology 20Nov, 2009 1 Introduction Wide Usage Industrial Agricultural Domestic Varied Designs Centrifugal Pumpsets Regenerative
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...
PUMPS FOR INDUSTRY CONTENTS: The Vertical Pump Specialists Introduction & User List Product Overview Vertical Process Pumps... Series 600 Vertical Sewage Pumps... Series 700 Vertical Sump Pumps... Series
Stainless steel centrifugal pumps
Stainless steel centrifugal pumps FOR GENERAL AND PROCESSING INDUSTRIES ICP IFF IRP ISP For over 25 years the ICP2 pump has proven itself as a very reliable process pump in the general processing industries.
TP /4-A-F-A-BQQE 400D 50HZ
GRUNDFOS DATA BOOKLET TP 15-7/-A-F-A-BQQE D 5HZ Grundfos pump 989838 Thank you for your interest in our products. Please contact us for more information, or visit our website https://www.lenntech.com/grundfos/tp/989838/tp-15-7--a-f-a-bqqe.html
4VH and 4VHX. 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction
4VH and 4VHX 4" Non-Clog Wastewater Pumps Standard (4VH) and Explosion-Proof (4VHX) Construction DURABLE MOTOR WILL DELIVER MANY YEARS OF RELIABLE SERVICE Oil-filled motor for maximum heat dissipation
Worthington D-834. vertical inline cast iron pumps
Worthington D-834 vertical inline cast iron pumps D834 Sales Features Dry Rabbet Fit Between Casing and Adapter. Precision machined surfaces between casing and adapter are sealed from pumping liquid, preventing
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y HVN. Double Suction, Heavy Duty API 610 Process Pump (BB2)
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y HVN For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology The Ruhrpumpen range
Goulds 3600 Between-Bearing, Axially-Split, Multistage Pumps
Goulds Pumps Goulds 3600 Between-Bearing, Axially-Split, Multistage Pumps motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10 / Fax. : 01.39.97.68.48 Demande de prix / e-mail
dp pumps the dynamics of water HVAC centrifugal (norm) pumps
dp pumps the dynamics of water HVAC centrifugal (norm) pumps 2 HVAC centrifugal (norm) pumps HVAC efficient solutions for comfortable living conditions To be comfortable in a building, both at home and
ETP Series - Self Priming Pumps
ETP Series - Self Priming Pumps ETP SERIES Decades of experience in development & manufacturing of injection Moulded Polypropylene Corrosion Resistant Pumps. Design philosophy is to design pumps that are
CombiPrime Self-priming centrifugal pumps
CombiPrime Self-priming centrifugal pumps CombiPrime Self-priming centrifugal pumps CombiPrime is a series of self-priming centrifugal pumps, suited for pumping clean or slightly polluted liquids, with
489 & 490 Series CAST IRON UNITS BRONZE UNITS STAINLESS STEEL UNITS MAINTENANCE. Figure 1 - Mechanical Seal Replacement
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog More Than 60 Years Developing The Pumping Technology That Drives Progress Engineering Excellence Ruhrpumpen is an innovative
PRESSURE ASSEMBLIES WITH ONE PUMP
PRESSURE ASSEMBLIES WITH ONE PUMP WATERPRESS / WATERPRESS / The WATERPRESS / and / are booster sets produced with NEWJET self-priming centrifugal pump. They are supplied wired, tested and complete with
SERIES 1600 Quality Design Features Assure Long, Trouble-Free Service
Vortex End Suction SERIES 1600 Quality Design Features Assure Long, Trouble-Free Service WIDE RANGE OF APPLICATIONS: Food Processing Solids Waste Water Treatment Pollution Control Slurries Industrial Process
UPZ PUMP POWER FOR TOP PERFORMANCE UNDER
Submersible borehole pump People at KSB we make your world flow round! UPZ PUMP POWER FOR TOP PERFORMANCE UNDER THE TOUGHEST CONDITIONS UPZ is top choice wherever submersible borehole pumps have to satisfy
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y Standard Pumps Manufacturing Plants Today Ruhrpumpen is a worldwide company, with a network of global manufacturing plants in different countries and
ARBO Chemical pumps SealPro with mechanical seal. Product group 1.1
ARBO Chemical pumps SealPro with mechanical seal Product group 1.1 Product group 1.1 SealPro Applications For all transport or circulation duties of corrosive liquids, even high viscosity, with maximum
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS. Catalog
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y INDUSTRIAL PUMPS Catalog Ruhrpumpen offers a wide range of standard pump designs and sizes providing energy efficient solutions for the vast majority
Design and manufacture of agitators since INSTALLATION MANUAL Start-up and maintenance. Top-entry agitators
Design and manufacture of agitators since 94 Top-entry agitators CONTENTS Page - Introduction - Precautions prior to start-up 4 - Safety recommendations 6.. Protection against the risk of explosion 6..
CLOSED COUPLED CENTRIFUGAL PUMPS
0 Third Street Piqua, Ohio 6-060 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES G--/ G6--/ SECTION B PAGE ISSUED /0 REPLACES /0 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM - 60Hz.
TYPE VSM/VSMS VERTICAL SPACE MISER PUMPS
PACO VSM/VSMS TYPE VSM/VSMS VERTICAL SPACE MISER PUMPS Close and Split Coupled VERTICAL SPACE MISER Type VSM (Close Coupled) Type VSMS (Split Coupled) SMALL FOOTPRINT FOR TIGHT SPACES > Vertically mounted
.2 Section Waste Management and Disposal..5 Section Motors, Drives and Guards for Mechanical Systems.
Issued 2006/08/01 Section 15131 Pumps Hydronic Systems Page 1 of 6 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01330 Submittal Procedures..2 Section 01355 Waste Management and Disposal.3 Section 01780
CR A-F-A-E-HQQE 3x400/ HZ
GRUNDFOS DATA BOOKLET CR45-12-2 A-F-A-E-HQQE 3x4/69 5 HZ Grundfos Pump 96122818 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96122818/cr-45-12-2-a-f-a-e-hqqe.html
470 Series Stamped Stainless Steel Pumps
470 Series Stamped Stainless Steel Pumps Flows to: 1100 GPM Heads to: 2000 Feet 130 Years of Pump Manufacturing American-Marsh Pumps, one of the oldest pump lines in America, are pump products steeped
Torqueflow Sydex. Fluid Management. K Range Pumps
Torqueflow Sydex Fluid Management K Range Pumps The extremely popular K-range is a heavy-duty robust industrial pump designed for a wide range of applications throughout a multitude of industries. Available
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING
SECTION 221123 - DOMESTIC WATER PUMPS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following all-bronze and bronze-fitted centrifugal pumps for domestic cold- and hot-water circulation: 1.
ROWA -HP High-Pressure Centrifugal Pump
ROWA -HP High-Pressure Centrifugal Pump 2 Pump Type ROWA -HP Quality through Experience Fields of Application Handling of clean to slightly contaminated corrosive liquids up to discharge pressures of 100
CRN A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN45-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96123118 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn45/96123118/crn-45-2-2-a-f-g-e-hqqe.html
CR32-4 A-F-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR32-4 A-F-A-E-HQQE 3x4D 5 HZ Grundfos Pump 9612213 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9612213/cr-32-4-a-f-a-e-hqqe.html
CR A-F-A-V-HQQV 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR9-1-1 A-F-A-V-HQQV 3x4D 5 HZ Grundfos Pump 9612486 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9612486/cr-9-1-1-a-f-a-v-hqqv.html
CR64-1 A-F-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR64-1 A-F-A-E-HQQE 3x4D 5 HZ Grundfos Pump 96123527 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96123527/cr-64-1-a-f-a-e-hqqe.html
CR A-F-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR64-2-2 A-F-A-E-HQQE 3x4D 5 HZ Grundfos Pump 96123528 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/96123528/cr-64-2-2-a-f-a-e-hqqe.html
Pumps Mixers Aeration Controls Services SCANPUMP SPLIT CASING PUMP Z22.
Pumps Mixers Aeration Controls Services SCANPUMP SPLIT CASING PUMP Z22. SERIES Z22 - WHEN GOOD IS NOT ENOUGH. Since we delivered our first process pumps back in the 1870 s, our goal has been to optimize
Centrifugal Pumps acc. to EN / ISO 2858 with Shaft Sealing Type NCL
Centrifugal Pumps acc. to EN 22858 / ISO 2858 with Shaft Sealing Type NCL General The DICKOW centrifugal pump acc. to EN 22858 / ISO 2858 is designed for handling liquids in the chemical and petrochemical
CR10-16 A-FJ-A-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CR1-16 A-FJ-A-E-HQQE 3x4D 5 HZ Grundfos Pump 9651222 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crfam/9651222/cr-1-16-a-fj-a-e-hqqe.html
Patterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions.
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
dp pumps the dynamics of water HVAC centrifugal (norm) pumps
dp pumps the dynamics of water HVAC centrifugal (norm) pumps 2 HVAC centrifugal (norm) pumps HVAC efficient solutions for comfortable living conditions To be comfortable in a building, both at home and
CRN90-1 A-F-G-V-HQQV 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN9-1 A-F-G-V-HQQV 3x4D 5 HZ Grundfos Pump 96124237 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn9/96124237/crn-9-1-a-f-g-v-hqqv.html
MSL A B A BK3 OS P AB
Peerless Pump Company, LLC MSLA & MSMR Multistage Pump Selection SECTION 2920 Page 1 1. Select basic Pump size based on Hydraulics. (Use RAPID Version 6.2) 2. Review suction pressure 3. Look at Shut-Off
569, 570, 571, 572 Series
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
This label warns for risk of electrical shock when failing to observe.
MANUAL horizontal centrifugal pumps MB series ic drive SB series mechanical seal 1. Introduction 2. Safety precautions 3. Receipt 4. Installation / Operation and Maintenance 4.1 Installation 4.2 Operation
SERIES ES BASE MOUNTED TURBINE PUMPS
PumpAgents.com - Click here for Pricing/Ordering SERIES ES PAGE BASE MOUNTED TURBINE PUMPS ES - 75 RPM - 60Hz. ES - 350 RPM - 60Hz. (See Individual curves for symbol number) ES - 900 RPM - 50Hz. (See Individual
Domestic Pump Condensate Transfer Equipment
Bulletin S-944L Domestic Pump Condensate Transfer Equipment CONDENSATE RETURN UNITS BOILER FEED UNITS LOW NPSH PUMPS VACUUM HEATING UNITS INDUSTRIAL VACUUM UNITS www.domesticpump.com Condensate Return
Patterson/AMT Inline Circulator Pump Refer to pump manual for General Operating and Safety Instructions.
Please read and save this Repair Parts Manual. Read this manual and the General Operating Instructions carefully before attempting to assemble, install, operate or maintain the product described. Protect
SIHI LPH-X - Liquid Ring Vacuum Pump One Stage
- Liquid Ring Vacuum Pump One Stage LPH 50523 Pressure Range: Suction Range: 120 to 1013 mbar 70 to 500 m³/h CONSTRUCTION Sterling SIHI liquid ring vacuum pumps have a simple but robust construction with
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y. In-Line Pumps IIL / IVP / IVP-CC
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y In-Line Pumps IIL / IVP / IVP-CC For more than 0 years the name Ruhrpumpen TM has been synonymous worldwide with innovation and reliability for pumping
PhiloWilke Partnership Addendum No. 2 A/E Project No April 2016
SECTION 23 21 23 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions and Division 01 Specification Sections, apply to this Section.
Locations Include: Food & Beverage. Chemical. Waste Water Treatment. Pulp & Paper. Energy, Oil & Gas
Locations Include: Memphis, TN Jackson, TN Little Rock, AR Springdale, AR Tupelo, MS Food & Beverage Chemical Waste Water Treatment Pulp & Paper Energy, Oil & Gas 1721 Corporate Avenue Memphis, TN 38118