Heat Pump Technology. Air Source, Water Source and Ground Source. Optimised heat pumps for residential and commercial applications

Size: px
Start display at page:

Download "Heat Pump Technology. Air Source, Water Source and Ground Source. Optimised heat pumps for residential and commercial applications"

Transcription

1 Heat Pump Technology Air Source, Water Source and Ground Source Optimised heat pumps for residential and commercial applications

2 ICS Cool Energy Limited has nearly 25 years experience in supplying and servicing air, water and ground source heat pumps for commercial and residential markets. Since 1988, ICS has been providing temperature control systems and heat transfer equipment for an extensive range of applications and users. With their wealth of experience, ICS has become an extremely well-established business operating throughout the UK and Europe, employing over 180 people with a combined group turnover of over 40 million. ICS Cool Energy has a strong relationship with DeLonghi Professional who are now Europe s largest manufacturer of refrigeration based temperature control equipment. They specifically selected ICS to exclusively sell their range of heat pumps throughout the UK and Europe to commercial and residential markets including medical, retail, education and care to name but a few. ICS Cool Energy s complete range of environmentally friendly heat pumps are powered by renewable sources, providing the contractor, specifier or end user with high quality energy saving temperature control solutions. Combining natural energy with the latest unit features which can save a property up to 50% in energy costs compared to traditional heating systems. Units offer capacities from 4kW to 205kW featuring inverter (i-ki) and scroll compressors, electric axial fans and electronic control systems for high performance and simplicity. Units can cater for all types of applications including internal and external environments. Air, water and ground provide powerful and reliable energy sources for maintaining consistent temperatures throughout homes and businesses. These precious thermal sources work with heat pumps to ensure reduced energy expenses and completely sustainable systems. The heat pump market is developing rapidly as the need to reduce carbon footprints and lower energy bills is ever increasing. The Government s Carbon Reduction Commitment Scheme (CRC) is one of the strongest drivers towards lower emissions in commercial and residential buildings. Heating accounts for the largest proportion of energy usage in the UK and it must be carefully considered when looking at the overall emissions for both new and existing buildings. All units are manufactured to ISO and Eurovent accreditations, ensuring high quality and maximum reliability. 2

3 Contents Page 4-5 Environmental Benefits of the Heat Pump Page 6 Features and Benefits Page 7 Case Study: New Build achieves BREEAM Points with ICS Heat Pump Technology Page 8 Utilising Natural resources with Heat Pump Technology Page 9 Which renewable source is right for you? Page 10 Electronic Control for Clever System Management Page The Range Air Source, Water Source, Ground Source Page i-ki/i-kir 3.75kW kW Air cooled heating only heat pumps with DC inverter compressor for outdoor installation Page AWR MTD2 XE 5.20kW kW Reversible, air source for outdoor use Page AWR DHW2 XE - /B/SL/S 5.80kW kW Reversible, air source with total heat recovery for outdoor use Page AW HT 10.4kW kW Air source, high efficiency heat pump for high water temperature. Heat pump for outdoor installation Page AW(R) HT - CA-E/LN-CA-E - 38kW 205kW Highly efficient, high temperature, air source heat pump for outdoor installation Page WWR MTD2 5.20kW kW Water source, reversible heat pump Page WWR DHW2 5.10kW 34.8kW Water source, reversible heat pump with total heat recovery Page BWR MTD2 5.10kW 32.6kW Ground source, reversible heat pump Page BWR DHW2 5kW 34kW Ground source, reversible heat pump with total heat recovery 3

4 Environmental Benefits of the Heat Pump Installing a heat pump is an easy and cost-effective way of reducing carbon emissions for a residential building or commercial site. Using natural energy sources including air, water and ground, ICS Cool Energy heat pumps can save on long-term energy costs, offering a profitable investment for a property. 50% Energy Savings Sourcing energy from natural resources ensures the highest quality of energy saving technology. Furthermore, the units feature the latest inverter driven compressors, fans and pumps with clever control systems specifically designed for efficient integration between components; reducing energy costs by up to 50% when compared to traditional systems. Natural Resources Using the direct heat energy from the sun, power from water and ground heat from the ground, ensures no repercussions to fossil fuel and directly reducing carbon emissions. Heat from the sun is renewable, free of charge and a constant supply of energy; making the heat pump the best possible energy saving temperature control system for any building or site. Innovative Technologies Featuring the latest inverter DC brushless compressors within the i-ki units and heat recovery options throughout the unit ranges, these heat pumps combine modern technologies with renewable energy sources to provide a complete energy saving package. 4

5 60% Reduction in CO 2 Emissions For the management of comfort cooling within a building, heat pumps are ideal as they can provide heating and cooling as well as hot water. 75% of the energy used to power heat pumps directly comes from the environment which means only 25% of the power supply is used. This low energy consumption has seen reductions in CO 2 emissions of up to 60% compared to traditional systems. Maximum Comfort All Year Round Heat pumps are flexible to their requirement, providing a reliable temperature, with flexibility for every season. Furthermore, sound emissions are minimal due to acoustic protected fans and compressors. Personnel can work in complete comfort all year round with absolutely no disturbance. Investment For Your Property Every commercial building now has to be compliant with energy saving legislations proving how carbon emissions are being reduced. With heat pump technology, building owners can actively show such savings in energy consumption, proving to be especially suitable for new builds or refurbishments, further improving the present and future value of a property. 5

6 Features and Benefits One single heat pump unit can offer a vast range of advantages to any commercial or residential building. In addition to energy efficiency, flexibility is one of a heat pump s key attributes with the ability to provide heating, cooling and domestic hot water for a site. Domestic Hot Water Production (DHW2) DHW2 models all offer free domestic hot water thanks to the exclusive total heat recovery system. Within residential buildings, this unit can remove heat and humidity from the property during the cooling cycle. During the heating cycle, the system will remove heat from the outside air and transfer into the building. When in cooling mode, the system will reduce the fluid s temperature and transfer the heat to another fluid, air, water or ground. Thanks to this process, heat isn t wasted and instead re-used for other processes. Silent Operation Compressors are jacketed and insulated which significantly reduces vibrations and sound emissions. For indoor units, specially designed acoustic panels are fitted providing the lowest noise emissions on the market. Temperatures Down to -20 C Heat Pumps can be installed in the most extreme climate conditions, even in areas where temperatures drop to as low as -20 C. Thanks to high quality internal components and skilled manufacturing, ICS Cool Energy heat pumps go far beyond the limits of traditional units. 6

7 Simple Installation ICS Cool Energy heat pumps range from low temperature systems based on radiant floor or fan coils to more traditional systems with radiators. All units utilise this simple and flexible install. Furthermore, maintenance requirements are reduced thanks to the use of sealed factorytested refrigerant circuits. Intelligent Control System Cutting edge components and an intelligent central control system guarantees maximum reliability. This allows for communication between components; eliminating inefficiencies and simplifying the installation which reduces maintenance checks. Existing heating systems can easily be integrated with the new heat pump making the most of the renewable energy source. Case Study: New Build Achieves BREEAM Goal With ICS Cool Energy s Heat Pumps A new social enterprise build in Derbyshire was looking to achieve a BREEAM accreditation in line with a very good rating at minimum with ambitions for excellent ; using 10% renewable energy to help achieve this goal. The facility houses administration offices, laundry facilities and community daytime areas as well as external gardens. The two storey building is heated by a central boiler plant with a facility for each residential unit to be separately controlled. ICS Cool Energy s Heat Pumps division worked on the project directly with the consultants, supplying two DeLonghi electric air to water heat pumps. Unlike air to air heat pumps which heat air within a building, they heat water which can be circulated around a traditional low temperature heating system such as under floor heating. Recently, this technology has seen much improvement and allows for a conventional under floor heating system without the need for boilers. Air to water systems now can provide low pressure hot water at 65 C which is suitable for localised hot water production to feed an under floor heating system. When comparing this air to water heat pump system with a traditional gas boiler, the energy saving efficiencies are evident: Gas Boiler Heat Pump Load (kw) Annual Heat Output (kwhr) Seasonal Efficiency (ESEER) Annual Heat Input (kwhr) Carbon Emission (KgCo 2 ) With the installation of the four heat pump systems, the new social enterprise facility will see a saving (based on an electric cost of 6.4p/kWhr) of 4,490 per year with payback in as little as seven years. 7

8 Utilising Natural Resources With Heat Pump Technology Air, water and ground source heat pumps provide powerful and reliable energy sources for maintaining consistent temperatures throughout homes and businesses. These precious thermal sources work with heat pumps to ensure reduced energy expenses and complete sustainable systems. Heat pump performances are rated as a Co-Efficient of Performance otherwise known as COP. This measures how much heat is generated per unit of electricity used to drive the heat pump. An efficient system should give a COP of three or more. Another measure of performance is the System Efficiency Ratio (SER) which measures the amount of heat the pump is producing for each unit of electricity required to run the entire heating system. Based on use in the typical UK climate, the average COP level for air, water and ground source heat pumps can be as high as four which is highly efficient, showing units which can generate a large amount of heat energy for a site. Cost: Pence per 10kWH The graph shown below indicates how much different types of energy sources cost per 10kW based on a COP of 3.2 for air source and 3.8 for ground source Gas Oil LPG Fuel Type Indicative fuel cost comparison per 10kWH Electric Air Source Ground Source Gas = 37p Electric = 105p Oil = 55p Air Source Heat Pumps = 31p LPG = 53p Ground Source Heat Pumps = 26p 8

9 Which Renewable Source Is Right For You? Air Air source heat pumps work by transferring heat from the atmosphere at low temperatures into a fluid. Using energy from external air provides an easy solution for the production of domestic hot water, heating and cooling. Air source units can lower fuel bills and reduce maintenance costs especially if it is replacing a conventional electric heating system. High performances can be increased by the adoption of inverter technology available in the i-kir units. Water Water source heat pumps provide high heat transfer with a fast flow circulation allowing for constant energy replacement. Lakes, ponds, rivers, springs, wells and boreholes are all important energy sources. Water source units do not need trenches which reduces the cost of installation. Furthermore these units provide the highest performance levels whilst reducing energy consumption as much as 50%. Ground Ground source heat pumps utilise pipes buried in the ground to absorb thermal energy from the earth. The ground stays at a fairly constant temperature under the surface, so the heat pump can be used throughout the year even in areas with harsh winters. Ground source units can now adapt to every soil type thanks to extensive research and development. These units are ideal for use with radiators, under floor heating, warm air systems and hot water. 9

10 Electronic Control for Clever System Management ICS Cool Energy offer DeLonghi s state of the art Nadi system allowing for integration and communication between different system components which eliminates inefficiencies, simplifying installation and reducing the number of controllers. Moreover, this innovative controller actively monitors the water outlet temperature prioritising the renewable energy to provide capacity to meet the building load. This ensures maximum optimisation for energy consumption. Customised Time Bands Six daily time bands are available to allow the users to personalise temperatures for seasonal periods or when a building is empty. Customised activation and deactivation features are available for each individual zone of the system, helping to reduce energy usage and therefore costs. 20 o C I Time band II Time band III Time band IV Time band V Time band VI Time band 18 o C OFF Managing Energy Sources The Nadi System has the ability to control when energy is consumed and where it is sourced from. Based on the availability, efficiency and cost. The controller always gives priority to the renewable source. RADIATORS Supplementary energy sources are used to meet the building s requirements when outside temperatures are low by increasing the heating capacity of the heat pump. Intelligent Control For residential applications, there are flexible operating features which are offered to control the secondary circuits, activating the pumps and valves depending on the room temperature set on the remote keypad. RADIANT HEAT DHW There are 15 different pre-configured settings for easy installation with the ability to manage up to five remote keypads for controlling thermal loads. Cascade control of up to four heat pumps allows for precise control over the capacity which is delivered without affecting performance. + INTEGRATED SOURCE Nadi System Features FAN COIL Back light display with remote temperature and humidity probe User-friendly management system Personalised management Time band programming Cascade control of up to four heat pumps Domestic Hot Water 10

11 The Range Air Source Water Source Ground Source 11

12 Air Source Units Air source heat pumps transfer heat from the ambient air using water as an exchange fluid i-ki/i-kir - cooling, heating, domestic hot water Air/water reversible or heating only heat pump with DC inverter compressor and domestic hot water production AWR MTD2 XE - cooling, heating, domestic hot water Air/water reversible heat pump for water heating up to 58 C and operating limits down to -15 C. External air temperature and domestic hot water production AWR DHW2 XE - cooling, heating, domestic hot water, total heat recovery Reversible air/water heat pump with the production of hot water offering total heat recovery THR AW HT- heating (65 o C), domestic hot water Air/water only heating heat pump for the heating of water up to 65 C and operating limits down to -20 C 65 C 65 C AW(R) HT - heating (65 o C), domestic hot water High efficiency air source heat pump for outdoor installation offering high water temperatures with capacities up to 200kW 12

13 Water Source Units Water source heat pumps use water from an aquifer WWR MTD2 - cooling, heating, domestic hot water Reversible water heat pump for heating water up to 55 C and domestic hot water production WWR DHW2 - cooling, heating, domestic hot water, total heat recovery Reversible water heat pump for domestic hot water production THR Ground Source Units Ground source heat pumps transfer heat from the earth through probes BWR MTD2 - cooling, heating, domestic hot water Reversible heat pump for heating water up to 55 C and domestic hot water production BWR DHW2 - cooling, heating, domestic hot water, total heat recovery Reversible heat pump, with domestic hot water production and total heat recovery THR 13

14 i-ki/i-kir Reversible, Air Source Heat Pump with DC Inverter Compressor for Outdoor Installation 3.75kW kW Versions i-ki Air cooled heating only heat pump featuring axial fans. Heats water up to 60 C with an operating limit of -20 C outdoor air temperature featuring domestic hot water production. i-kir Air cooled reversible heat pump with axial fans offering water temperatures up to 60 C and operating limits of -20 C, featuring domestic hot water production. Unit Description The i-ki and i-kir units are external units with integrated hydronic module and electronic regulations. They provide heating, cooling and domestic hot water production. Thanks to their inverter compressor technology, the units can achieve high temperatures of up to 60 C within winter months. Units can be integrated with traditional systems or radiant panels providing maximum flexibility and high efficiency levels. Commands Nadi System electronic control provides great flexibility offering: Back light Six daily time bands Up to four heat pumps in cascade control User friendly management system A zone for direct heating for radiator, floor heating or fan coil A zone with mix valve for floor heating Electrical heating element for possible integration and anti-legionellosis cycle for cylinder Boiler or electric heater Features Wired remote control complete with temperature and humidity probe External air probe for weather compensation Internal module complete with electronic board Structure and base are manufactured in galvanised epoxy powder and coated steel High efficiency with lower pressure drop stainless steel with water exchangers completed with closed cell insulation Hermetic scroll DC brushless compressor equipped with crankcase heater and thermal protection Electronic expansion valve Finned coils made with copper pipes and aluminium fins Electronic axial fans Condensation collecting tray The water circuit comes complete with a water circulator, 8 litre expansion tank, safety valve, manual filling assembly air vent valve Accessories Serial card RS485 for ModBus Extension module for system configuration Three way valve for domestic hot water Cascade management kit 14

15 i-kir-mtd - Application Hydronic Terminal i-ki-mtd 0011m 0031m 0061m Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 COOLING ONLY (GROSS VALUE) Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) COOLING ONLY (EN14511 VALUE) Cooling capacity (1)(2) kw EER (1)(2) ESEER (1)(2) Cooling energy class C E A HEATING ONLY (GROSS VALUE) Total heating capacity (3) kw Total power input (3) kw COP (3) HEATING ONLY (EN14511 VALUE) Total heating capacity (3)(2) kw COP (3)(2) Cooling energy class B B A Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (3) m 3 /h Available unit's head (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Source (side) heat exchanger air (in) 35 o C. 2. Values in compliance with EN : Plant (side) heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger air (in) 7 o C - 85% R.H. 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 15

16 i-kir-mtd - Application Floor Heating Radiant Panel Application i-ki-mtd 0011m 0031m 0061m Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 COOLING ONLY (GROSS VALUE) Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) COOLING ONLY (EN14511 VALUE) Cooling capacity (1)(2) kw EER (1)(2) ESEER (1)(2) Cooling energy class A E A HEATING ONLY (GROSS VALUE) Total heating capacity (3) kw Total power input (3) kw COP (3) HEATING ONLY (EN14511 VALUE) Total heating capacity (3)(2) kw COP (3)(2) Cooling energy class B B A Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (3) m 3 /h Available unit's head (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 23 o C/18 o C; Source (side) heat exchanger air (in) 35 o C. 2. Values in compliance with EN : Plant (side) cooling exchanger water (in/out) 30 o C/35 o C; Plant (auxiliary side) heat exchanger recovery water (in/out) 7 o C/87 o C R.H. 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 16

17 i-ki-mtd - Application Hydronic Terminal i-ki-mtd 0011m 0031m 0061m Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 HEATING ONLY (GROSS VALUE) Total heating capacity (3) kw Total power input (3) kw COP (3) Water flow (1) m 3 /h Available unit's head (1) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) Heat exchanger water (in/out) 30 o C/35 o C; Source (side) heat exchanger air (in) 7 o C - 87% R.H. 2. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; incompliance with ISO 3744 for non-certified. 3. Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 4. Unit in standard configuration/execution, without optional accessories. i-ki-mtd - Application Floor Heating i-ki-mtd 0011m 0031m 0061m Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 HEATING ONLY (GROSS VALUE) Total heating capacity (3) kw Total power input (3) kw COP (3) Water flow (1) m 3 /h Available unit's head (1) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) Heat exchanger water (in/out) 30 o C/35 o C; Source (side) heat exchanger air (in) 7 o C - 87% R.H. 2. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified. 3. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 4. Unit in standard configuration/execution, without optional accessories. 17

18 AWR MTD2 XE High efficiency air source reversible heat pump for outdoor installation 5.20kW 22.1kW Versions AWR MTD2 XE Reversible air/water heat pump for heating water up to 58 C and operating limits down to -15 C featuring domestic hot water production. AWR MTD2 XE/H Reversible air/water heat pump for heating water up to 58 C and operating limits of -15 C featuring an integrated electric heater and domestic hot water production. Unit Description Providing heating, cooling and hot water, the AWR MTD2 XE is a modern unit designed specifically for improving heating throughout the winter months. The ability to integrate the unit into existing systems allows for a simplified installation procedure. All units are class A Eurovent accredited to ensure high quality and reliability. Commands Nadi System electronic control system provides great flexibility offering: Back light Six daily time bands Up to four heat pumps in cascade control User friendly management system A zone for direct heating for radiator, floor heating or fan coil A zone with mix valve for floor heating Electrical heating element for possible integration and anti-legionellosis cycle for cylinder Boiler or electric heater Features High efficiency with lower pressure stainless steel drop (AISO 316) with water exchangers featuring close cell insulation Hermetic, scroll compressors with crankcase heater and thermal protection Finned coils made with copper pipes and aluminium fins Electric axial fans, external rotor, six pipe electric motor fitted with thermal protection Low external air temperature device Soft Starter Condensation collecting tray Phase sequencer control replay for three Accessories Serial card RS485 for ModBus Extension module for system configuration Wired room terminal with back light display Three way valve for domestic hot water Electric heater for integration of the heating system Cascade management kit External buffer kit 18

19 AWR MTD2 XE - Application Hydronic Terminal AWR MTD2 XE 0011ms 0025ms 0031ms 0041ms 0031t 0041t 0051t 006t 0091t Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 COOLING ONLY (GROSS VALUE) Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) COOLING ONLY (EN14511 VALUE) Cooling capacity (1)(2) kw EER (1)(2) ESEER (1)(2) Cooling energy class B C B B B B B B B HEATING ONLY (GROSS VALUE) Total heating (3) kw capacity Total power input (3) kw COP (3) HEATING ONLY (EN14511 VALUE) Total heating capacity (3)(2) kw COP (3)(2) Cooling energy class A A A A A A A A A Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (3) m 3 /h Available unit's head (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Source (side) heat exchanger air (in) 35 o C. 2. Values in compliance with EN : Plant (side) heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger air (in) 7 o C - 85% R.H. 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 19

20 AWR MTD2 XE - Application Floor Heating AWR MTD2 XE 0011ms 0025ms 0031ms 0041ms 0031t 0041t 0051t 006t 0091t Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 COOLING ONLY (GROSS VALUE) Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) COOLING ONLY (EN14511 VALUE) Cooling capacity (1)(2) kw EER (1)(2) ESEER (1)(2) Cooling energy class B C B B B B B B B HEATING ONLY (GROSS VALUE) Total heating (3) kw capacity Total power input (3) kw COP (3) HEATING ONLY (EN14511 VALUE) Total heating capacity (3)(2) kw COP (3)(2) Cooling energy class A A A A A A A A A Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (3) m 3 /h Available unit's head (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 23 o C/18 o C; Source (side) heat exchanger air (in) 35 o C. 2. Values in compliance with EN : Plant (side) heat exchanger water (in/out) 30 o C/35 o C; Source (side) heat exchanger air (in) 7 o C - 85% R.H. 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 20

21 AWR DHW2 XE Reversible, Air Source Heat Pump with Total Heat Recovery for Outdoor Installation 5.80kW 23.5kW Versions AWR DHW2 XE Air/water reversible heat pump for the production of domestic hot water with total heat recovery. AWR DHW2 XE/SL Air/water reversible heat pump with the production of domestic hot water, offering total heat recovery with super silent noise versions available. Unit Description The DHW unit is the new high efficiency heat pump unit designed specifically for all year round operation in any mode; single cycle (air conditioning, heating, domestic hot water as well as a combined cycle in total heat recovery (domestic hot water together with cooling). During summer months, heating of the water is free thanks to the full recovery of the heat; significantly improving energy efficiencies. The advanced electronic regulation ensures the highest operational flexibility, fast working conditions and a significant increase in the overall COP levels. The possibility of completely eliminating the traditional boiler, means the DHW unit is the ideal energy saving solution for commercial and residential buildings. Commands Nadi System electronic control system provides great flexibility offering: Back light Six daily time bands Up to four heat pumps in cascade control User friendly management system A zone for direct heating for radiator, floor heating or fan coil A zone with mix valve for floor heating Electrical heating element for possible integration and anti-legionellosis cycle for cylinder Boiler or electric heater Features Stainless steel (AISO 316) high efficient low pressure drop plate heat exchanger (on the domestic hot water side) Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection Electric axial fans Low external air temperature device: continuous fan speed regulation with pressure switch Coil protection grill Soft starter for 230V units The water circuit comes complete with plant side variable flow circulator, differential pressure switch, expansion tank, safety valve, manual filling assembly, pressure gauge and air vent valve Accessories Wired room terminal with backlit display and temperature and humidity probe Extension module for system configuration Electric heater for integration of the heating system Electric heater for hot water cylinder for anti-legionella Serial card RS485 for ModBus Cascade management kit Buffer tank 35/100/200 litres 21

22 AWR DHW2 XE/B - Application Hydronic Terminal AWR DHW2 XE/B 0021m 0025m 0041m 0025t 0041t 0065t 0101t Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 COOLING ONLY Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) HEATING ONLY Total heating capacity (2) kw Total power input (2) kw COP (2) COOLING WITH TOTAL HEAT RECOVERY Cooling capacity with total heat recovery (3) kw Total power input (3) kw Recovery heat exchanger capacity (3) kw TOTAL RECOVERY ONLY Total heating capacity (2) kw Total power input (2) kw Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (2) m 3 /h Available unit's head (2) kpa HEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATION Water flow (3) m 3 /h Pressure drop (3) kpa HEAT EXCHANGER RECOVERY USER SIDE IN HEATING Water flow (3) m3/h Pressure drop (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Source (side) heat exchanger air (in) 35 o C. 2. Plant (side) heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger air (in) 7 o C - 87% R.H. 3. Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45 o C/50 o C. 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 22

23 AWR DHW2 XE/B - Application Floor Terminal AWR DHW2 XE/B 0021m 0025m 0041m 0025t 0041t 0065t 0101t Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 COOLING ONLY Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) HEATING ONLY Total heating capacity (2) kw Total power input (2) kw COP (2) COOLING WITH TOTAL HEAT RECOVERY Cooling capacity with total heat recovery (3) kw Total power input (3) kw Recovery heat exchanger capacity (3) kw TOTAL RECOVERY ONLY Total heating capacity (2) kw Total power input (2) kw Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (2) m 3 /h Available unit's head (2) kpa HEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATION Water flow (3) m 3 /h Pressure drop (3) kpa HEAT EXCHANGER RECOVERY USER SIDE IN HEATING Water flow (3) m 3 /h Pressure drop (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 23 o C/18 o C; Source (side) heat exchanger air (in) 35 o C. 2. Plant (side) heat exchanger water (in/out) 30 o C/35 o C; Source (side) heat exchanger air (in) 7 o C - 87% R.H. 3. Plant (side) cooling exchanger water (in/out) 23 o C/18 o C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45 o C/50 o C. 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 23

24 AWR DHW2 XE/SL - Application Hydronic Terminal AWR DHW2 XE/SL 0065t 0101t Power supply V/ph/Hz 400/3/50 400/3/50 COOLING ONLY Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) HEATING ONLY Total heating capacity (2) kw Total power input (2) kw COP (2) COOLING WITH TOTAL HEAT RECOVERY Cooling capacity with total heat recovery (3) kw Total power input (3) kw Recovery heat exchanger capacity (3) kw TOTAL RECOVERY ONLY Total heating capacity (2) kw Total power input (2) kw Water flow (1) m 3 /h Available unit s head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (2) m 3 /h Available unit s head (2) kpa HEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATION Water flow (3) m 3 /h Pressure drop (3) kpa HEAT EXCHANGER RECOVERY USER SIDE IN HEATING Water flow (3) m 3 /h Pressure drop (3) kpa Compressors nr. N 1 1 No. circuits N 1 1 Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Source (side) heat exchanger air (in) 35 o C. 2. Plant (side) heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger air (in) 7 o C - 87% R.H. 3. Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45 o C/50 o C. 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 24

25 AWR DHW2 XE/SL - Application Floor Heating AWR DHW2 XE/SL 0065t 0101t Power supply V/ph/Hz 400/3/50 400/3/50 COOLING ONLY Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) HEATING ONLY Total heating capacity (2) kw Total power input (2) kw COP (2) COOLING WITH TOTAL HEAT RECOVERY Cooling capacity with total heat recovery (3) kw Total power input (3) kw Recovery heat exchanger capacity (3) kw TOTAL RECOVERY ONLY Total heating capacity (2) kw Total power input (2) kw Water flow (1) m 3 /h Available unit s head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (2) m 3 /h Available unit s head (2) kpa HEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATION Water flow (3) m 3 /h Pressure drop (3) kpa HEAT EXCHANGER RECOVERY USER SIDE IN HEATING Water flow (3) m 3 /h Pressure drop (3) kpa Compressors nr. N 1 1 No. circuits N 1 1 Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 23 o C/18 o C; Source (side) heat exchanger air (in) 35 o C. 2. Plant (side) heat exchanger water (in/out) 30 o C/35 o C; Source (side) heat exchanger air (in) 7 o C - 87% R.H. 3. Plant (side) cooling exchanger water (in/out) 23 o C/18 o C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45 o C/50 o C. 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 25

26 AWR DHW2 XE/S - Application Hydronic Terminal AWR DHW2 XE/S 0021ms 0025m 0041m 0025t 0041t 0065t 0101t Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 COOLING ONLY Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) HEATING ONLY Total heating capacity (2) kw Total power input (2) kw COP (2) COOLING WITH TOTAL HEAT RECOVERY Cooling capacity with total heat recovery (3) kw Total power input (3) kw Recovery heat exchanger capacity (3) kw TOTAL RECOVERY ONLY Total heating capacity (2) kw Total power input (2) kw Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (2) m 3 /h Available unit's head (2) kpa HEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATION Water flow (3) m 3 /h Pressure drop (3) kpa HEAT EXCHANGER RECOVERY USER SIDE IN HEATING Water flow (3) m3/h Pressure drop (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Source (side) heat exchanger air (in) 35 o C. 2. Plant (side) heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger air (in) 7 o C - 87% R.H. 3. Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45 o C/50 o C. 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 26

27 AW HT Highly efficient air source heat pumps for outdoor installation featuring high water temperatures 10.4kW 27.1kW Versions AW HT Air/water heating only heat pump for water heating up to 65 C and operating limits down to -20 C. Unit Description The AW HT unit is ideal for applications that need high temperatures for a radiator system. The EVI compressor technology featuring steam injection within the compressing cycle ensures a temperature of 65 C. Probes and connection pipes are not required for installation, allowing for simplified logistics. Commands Nadi System electronic control system provides great flexibility offering: Wired indoor and outdoor sensors allowing for dynamic control of delivery of water temperature Circular on system side A zone of direct heating Outdoor temperature sensor for water on the plant side Electrical heating element for possible integration and anti-legionellosis cycle for cylinder Integrated boiler Features Circulating pump for all models High efficiency plate heat exchanger Hermetic scroll compressor Finned coils made with copper pipes and aluminium fins Electric axial fans A condensation collection tray Electrical resistance modulating antifreeze Coil protection grill Soft starter Phase sequencer control relay for three phase models Accessories Three-way valve for domestic hot water Buffer tank Hot water cylinder 300 litres thermal stored for domestic hot water Control kit for heat pump with boiler 1/2/3kW single phase electric heater kit Rubber anti-vibration mounting kit 27

28 AW HT - Application Hydronic Terminal AW HT 0031ms 0041ms 0041t 0061t 0071t Power supply V/ph/Hz 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 HEATING ONLY (GROSS VALUE) Total heating capacity (1) kw Total power input (1) kw COP (1) Water flow (1) m 3 /h Available unit's head (1) kpa Compressors nr. N No. circuits N Noise power (2) db(a) Noise pressure (3) db(a) A (4) mm B (4) mm H (4) mm Operating weight (4) kg Plant (side) Heat exchanger water (in/out) 30 o C/35 o C; Source (side) heat exchanger air (in) 7 o C - 87% R.H. 2. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified. 3. Average sound pressure level, at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 4. Unit in standard configuration/execution, without optional accessories. AW HT - Application Floor Heating AW HT 0031ms 0041ms 0041t 0061t 0071t Power supply V/ph/Hz 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 HEATING ONLY (GROSS VALUE) Total heating capacity (1) kw Total power input (1) kw COP (1) Water flow (1) m 3 /h Available unit's head (1) kpa Compressors nr. N No. circuits N Noise power (2) db(a) Noise pressure (3) db(a) A (4) mm B (4) mm H (4) mm Operating weight (4) kg Plant (side) Heat exchanger water (in/out) 30 o C/35 o C; Source (side) heat exchanger air (in) 7 o C - 87% R.H. 2. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified. 3. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 4. Unit in standard configuration/execution, without optional accessories. 28

29 AW(R) HT Highly efficient air source reversible high temperature heat pumps for outdoor installation 38kW 205kW Versions AW(R) HT CA-E Premium efficiency with class A enhanced. AW(R) HT LN-CA-E Premium efficiency with class A enhanced and low noise. AW(R) HT Reversible option. Unit Description For applications which require high temperatures for both space heating and sanitary purposes, the high temperature AW(R) HT units are ideal. Space heating can be provided through radiators without having to make major changes to the existing heating system. The EVI compressor technology ensures water temperatures of up to 65 C and operating limits as low as -20 C. Commands These high temperature units feature the W3000HP controllers designed specifically for heat pump applications for the production of hot water. The W3000HP features: LCD display for viewing data and activating the unit Multi-level display with various languages The ability to prioritise hot water production over cooling if required by the user Complete alarm management with black box functions Alarm log for unit analysis Management of multiple units, ensuring efficient energy distribution Built-in clock which can be used to create operating profiles containing up to four typical days and ten time bands Integration with ModBus, BACnet, BACnet-over-IP and Echelon Features Class A efficiency Maximum reliability Super silent operation Extensive range of operation Renewable energy for commercial installations Modular configuration Accessories Air-refrigerant heat exchanger with copper fin tubes Condensing coils with expoxy coated fins Soft starter Remote phase sequence control Compressor s on/off signal Compressor suction valve Pressure relief valve Arrangement for a three-way valve for domestic hot water production 29

30 AW(R) HT/CA-E AW(R) HT/CA-E Power supply V/ph/Hz 400/3/50+N 400/3/50+N 400/3/50+N 400/3/50+N 400/3/50+N HEATING ONLY (GROSS VALUE) Total heating capacity (1) kw Total power input (1) kw COP (1) Water flow (1) m 3 /h Pressure drop (1) kpa Compressors nr. N No. circuits N Noise power (2) db(a) Noise pressure (3) db(a) A (4) mm B (4) mm H (4) mm Operating weight (4) kg Plant (side) Heat exchanger water (in/out) 30 o C/35 o C; Source (side) heat exchanger air (in) 7 o C - 87% R.H. 2. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified. 3. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 4. Unit in standard configuration/execution, without optional accessories. AW(R) HT/LN-CA-E AW(R) HT/LN-CA-E Power supply V/ph/Hz 400/3/50+N 400/3/50+N 400/3/50+N 400/3/50+N 400/3/50+N HEATING ONLY (GROSS VALUE) Total heating capacity (1) kw Total power input (1) kw COP (1) Water flow (1) m 3 /h Pressure drop (1) kpa Compressors nr. N No. circuits N Noise power (2) db(a) Noise pressure (3) db(a) A (4) mm B (4) mm H (4) mm Operating weight (4) kg Plant (side) Heat exchanger water (in/out) 30 o C/35 o C; Source (side) heat exchanger air (in) 7 o C - 87% R.H. 2. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified. 3. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 4. Unit in standard configuration/execution, without optional accessories. 30

31 AW(R) HT/CA-E - Application Hydronic Terminal AW(R) HT/CA-E Power supply V/ph/Hz 400/3/50 400/3/50 400/3/50 HEATING ONLY (GROSS VALUE) Total heating capacity (1) kw Total power input (1) kw COP (1) Water flow (1) m 3 /h Pressure drop (1) kpa Compressors nr. N No. circuits N Noise power (2) db(a) Noise pressure (3) db(a) A (4) mm B (4) mm H (4) mm Operating weight (4) kg Plant (side) Heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger air (in) 7 o C - 87% R.H. 2. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified. 3. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 4. Unit in standard configuration/execution, without optional accessories. AW(R) HT/LN-CA - Application Hydronic Terminal AW(R) HT/LN-CA Power supply V/ph/Hz 400/3/50 400/3/50 400/3/50 HEATING ONLY (GROSS VALUE) Total heating capacity (1) kw Total power input (1) kw COP (1) Water flow (1) m 3 /h Available unit's head (1) kpa Compressors nr. N No. circuits N Noise power (2) db(a) Noise pressure (3) db(a) A (4) mm B (4) mm H (4) mm Operating weight (4) kg Plant (side) Heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger air (in) 7 o C - 87% R.H. 2. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified. 3. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 4. Unit in standard configuration/execution, without optional accessories. 31

32 Water Source Source 32

33 WWR MTD2 Reversible, water source heat pump 5.20kW kW Versions WWR MTD2 Reversible water heat pump unit offering water temperatures of up to 55 o C. WWR MTD2/S - Soft start version. Unit Description The WWR MTD2 units offer heating, cooling and domestic hot water production by external three-way valve (accessory). These are suitable for traditional heating systems and radiant panels. Radiant panels work with water at lower temperatures, working well for new builds with low energy consumption. Installations are simplified thanks to the integration of the group by connecting the unit to the water plant and the electrical system so that it can be put into operation. Commands Nadi System electronic control system provides great flexibility offering: Back light Outdoor temperature sensor for water on the plant side Six daily time bands Up to four heat pumps in cascade control User friendly management system A zone for direct heating for radiator, floor heating or fan coil A zone with mix valve for floor heating Electrical heating element for possible integration and anti-legionellosis cycle for cylinder Boiler or electric heater Features High efficiency plate heat exchangers Hermetic scroll compressors Case panels are insulated within low noise material for silent operation Rubber vibration damper Soft starter Phase sequencer control replay for three phase models Accessories Wired room terminal with back light display Extension module for system configuration Three-way valve for domestic hot water Electric heater for hot water cylinder with integration for anti-legionella Cascade management Serial card RS485 33

34 WWR MTD2 - Application Hydronic Terminal WWR MTD2 0011ms 0025ms 0031ms 0041ms Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 COOLING ONLY (GROSS VALUE) Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) COOLING ONLY (EN14511 VALUE) Cooling capacity (1)(2) kw EER (1)(2) ESEER (1)(2) Cooling energy class F F G F HEATING ONLY (GROSS VALUE) Total heating (3) kw capacity Total power input (3) kw COP (3) HEATING ONLY (EN14511 VALUE) Total heating capacity (3)(2) kw COP (3)(2) Cooling energy class D D E D Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (3) m 3 /h Available unit's head (3) kpa HEAT EXCHANGER SOURCE SIDE IN REFRIGERATION Water flow (1) m 3 /h Pressure drop (1) kpa HEAT EXCHANGER SOURCE SIDE IN HEATING Water flow (3) m 3 /h Pressure drop (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Source (side) heat exchanger water (in/out) 30 o C/35 o C. 2. Values in compliance with EN : Plant (side) heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger water (in/out) 10 o C /* o C- (flow rate as in cooling). 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 34

35 WWR MTD2 - Application Floor Heating WWR MTD2 0011ms 0025ms 0031ms 0041ms Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 COOLING ONLY (GROSS VALUE) Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) COOLING ONLY (EN14511 VALUE) Cooling capacity (1)(2) kw EER (1)(2) ESEER (1)(2) Cooling energy class F F G F HEATING ONLY (GROSS VALUE) Total heating (3) kw capacity Total power input (3) kw COP (3) HEATING ONLY (EN14511 VALUE) Total heating capacity (3)(2) kw COP (3)(2) Cooling energy class D D E D Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (3) m 3 /h Available unit's head (3) kpa HEAT EXCHANGER SOURCE SIDE IN REFRIGERATION Water flow (1) m 3 /h Pressure drop (1) kpa HEAT EXCHANGER SOURCE SIDE IN HEATING Water flow (3) m 3 /h Pressure drop (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 23 o C/18 o C; Source (side) heat exchanger water (in/out) 30 o C/35 o C. 2. Values in compliance with EN : Plant (side) heat exchanger water (in/out) 45 o C/50 o C; Source (side) heat exchanger water (in/out) 10 o C /* o C- (flow rate as in cooling). 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 35

36 WWR MTD2/S 0025ts 0031ts 0041ts 0061ts 0071ts 0091ts 01011ts 0121ts Power supply V/ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 COOLING ONLY (GROSS VALUE) Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) COOLING ONLY (EN14511 VALUE) Cooling capacity (1)(2) kw EER (1)(2) ESEER (1)(2) Cooling energy class E F F E E E E E HEATING ONLY (GROSS VALUE) Total heating (3) kw capacity Total power input (3) kw COP (3) HEATING ONLY (EN14511 VALUE) Total heating capacity (3)(2) kw COP (3)(2) Cooling energy class C D C B C C C C Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (3) m 3 /h Available unit's head (3) kpa HEAT EXCHANGER SOURCE SIDE IN REFRIGERATION Water flow (1) m 3 /h , Pressure drop (1) kpa HEAT EXCHANGER SOURCE SIDE IN HEATING Water flow (3) m 3 /h , Pressure drop (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Source (side) heat exchanger water (in/out) 30 o C/35 o C. 2. Values in compliance with EN : Plant (side) heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger water (in/out) 10 o C /* o C- (flow rate as in cooling). 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 36

37 WWR DHW2 Reversible, water source heat pump with heat recovery 5.10kW kW Versions WWR DHW2 Reversible water source unit for the production of domestic hot water. Unit Description These units are designed for all year round operation in any operating mode; single cycle (air conditioning, heating, domestic hot water) as well as combined cycle in total heat recovery (domestic hot water together with cooling). The summer cycle allows the unit to make the most of the natural heat, allowing the domestic water to be heated for free. Combining the free heating with the compressor allows the heat pump to reach temperatures of up to 65 C. Advanced electronic regulation provides high operational flexibility along with fast working conditions allow high COP levels to achieve maximum energy savings. Features Commands Nadi System electronic control system provides great flexibility offering: Back light Outdoor temperature sensor for water on the plant side Six daily time bands Up to four heat pumps in cascade control User friendly management system A zone for direct heating for radiator, floor heating or fan coil A zone with mix valve for floor heating Electrical heating element for possible integration and anti-legionellosis cycle for cylinder Boiler or electric heater Case panels are insulated with low noise material Rubber vibration damper Hermetic scroll compressor Stainless steel plate type heat exchanger Soft starter Phase sequencer control replay for three phase models Accessories Wired room terminal with back light display and humidity and temperature probe Extrusion module for system configuration Three-way valve for domestic hot water Electric heater for the integration of a heating system Electric heater for hot water cylinder with integration for anti-legionella Cascade management kit Serial card RS485 for ModBus Buffer tank Hot water cylinder 37

38 WWR DHW2 - Application Hydronic Terminal WWR DHW2 0011ms 0025ms 0031ms 0041ms 0025t 0031t 0041t 0061t 0071t 0091t 0101t 0121t Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 COOLING ONLY Cooling capacity (1) kw , Total power input (1) kw EER (1) ESEER (1) HEATING ONLY Total heating capacity (2) kw Total power input (2) kw COP (2) COOLING WITH TOTAL HEAT RECOVERY Cooling capacity with total heat recovery (3) kw Total power input (3) kw Recovery heat exchanger capacity (3) kw TOTAL RECOVERY ONLY Total heating capacity (2) kw Total power input (2) kw Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (2) m 3 /h Available unit's head (2) kpa HEAT EXCHANGER SOURCE SIDE IN REFRIGERATION Water flow (1) m 3 /h Pressure drop (1) kpa HEAT EXCHANGER SOURCE SIDE IN HEATING Water flow (2) m3/h Pressure drop (2) kpa HEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATION Water flow (3) m3/h Pressure drop (3) kpa HEAT EXCHANGER RECOVERY USER SIDE IN HEATING Water flow (3) m3/h Pressure drop (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Source (side) heat exchanger water (in/out) 30 o C/35 o C. 2. Plant (side) heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger water (in/out) 10 o C/* o C (flow rate as in cooling). 3. Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45 o C/50 o C. 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 38

39 WWR DHW2 - Application Floor Heating WWR DHW2 0011ms 0025ms 0031ms 0041ms 0025t 0031t 0041t 0061t 0071t 0091t 0101t 0121t Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 COOLING ONLY Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) HEATING ONLY Total heating capacity (2) kw Total power input (2) kw COP (2) COOLING WITH TOTAL HEAT RECOVERY Cooling capacity with total heat recovery (3) kw Total power input (3) kw Recovery heat exchanger capacity (3) kw TOTAL RECOVERY ONLY Total heating capacity (2) kw Total power input (2) kw Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (2) m 3 /h Available unit's head (2) kpa HEAT EXCHANGER SOURCE SIDE IN REFRIGERATION Water flow (1) m 3 /h Pressure drop (1) kpa HEAT EXCHANGER SOURCE SIDE IN HEATING Water flow (2) m3/h Pressure drop (2) kpa HEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATION Water flow (3) m3/h Pressure drop (3) kpa HEAT EXCHANGER RECOVERY USER SIDE IN HEATING Water flow (3) m3/h Pressure drop (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 23 o C/18 o C; Source (side) heat exchanger water (in/out) 30 o C/35 o C. 2. Plant (side) heat exchanger water (in/out) 30 o C/35 o C; Source (side) heat exchanger water (in/out) 10 o C/* o C (flow rate as in cooling). 3. Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45 o C/50 o C. 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 39

40 40 Source

41 BWR MTD2 Reversible, geothermal source heat pump 5.10kW kW Versions BWR MTD2 Ground, reversible heat pump for heating water up to 55 C with domestic hot water production. Unit Description The BWR MTD2 is optimised for ground energy sources offering reversible heating, cooling and domestic hot water by an external three-way valve (accessory). These units are suitable for traditional heating systems and radiant panels. Working with traditional systems at lower temperatures, the unit produces higher yields which work well for new buildings with low energy consumption. Advanced electronic regulation provides high operational flexibility along with fast working conditions allowing for high COP levels to be achieved maximising energy savings. Commands Nadi System electronic control system provides great flexibility offering: Back light Outdoor temperature sensor for water on the plant side Six daily time bands Up to four heat pumps in cascade control User friendly management system A zone for direct heating for radiator, floor heating or fan coil A zone with mix valve for floor heating Electrical heating element for possible integration and anti-legionellosis cycle for cylinder Boiler or electric heater Features High efficiency plate type heat exchangers in stainless steel with low pressure drops Hermetic scroll compressors equipped with crankcase heater and thermal protection Case panels are insulated with low noise material for super silent operation Rubber vibration damper Soft starter Phase sequencer control replay for three phase models Accessories Wired room terminal with back light display and humidity and temperature probe Extrusion module for system configuration Three-way valve for domestic hot water Electric heater for the integration of a heating system Electric heater for hot water cylinder with integration for anti-legionella Cascade management kit Serial card RS485 for ModBus Buffer tank Hot water cylinder 41

42 BWR MTD2 - Application Hydronic Terminal Ground Source BWR MTD2 0011ms 0025ms 0031ms 0041ms Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 COOLING ONLY (GROSS VALUE) Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) COOLING ONLY (EN14511 VALUE) Cooling capacity (1)(2) kw EER (1)(2) ESEER (1)(2) Cooling energy class G F G G HEATING ONLY (GROSS VALUE) Total heating (3) kw capacity Total power input (3) kw COP (3) HEATING ONLY (EN14511 VALUE) Total heating capacity (3) kw COP (3) Cooling energy class (3) G G G G Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (3) m 3 /h Available unit's head (3) kpa HEAT EXCHANGER SOURCE SIDE IN REFRIGERATION Water flow (1) m 3 /h Pressure drop (1) kpa HEAT EXCHANGER SOURCE SIDE IN HEATING Water flow (3) m 3 /h Pressure drop (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Source (side) heat exchanger water (in/out) 30 o C/35 o C. 2. Values in compliance with EN : Plant (side) heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger water (in/out) 0 o C/3 o C (Gly 225%). 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 42

43 BWR MTD2 - Application Floor Heating Ground Source BWR MTD2 0011ms 0025ms 0031ms 0041ms Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 COOLING ONLY (GROSS VALUE) Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) COOLING ONLY (EN14511 VALUE) Cooling capacity (1)(2) kw EER (1)(2) ESEER (1)(2) Cooling energy class G F G G HEATING ONLY (GROSS VALUE) Total heating (3) kw capacity Total power input (3) kw COP (3) HEATING ONLY (EN14511 VALUE) Total heating capacity (3) kw COP (3) Cooling energy class (3) G G G G Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (3) m 3 /h Available unit's head (3) kpa HEAT EXCHANGER SOURCE SIDE IN REFRIGERATION Water flow (1) m 3 /h Pressure drop (1) kpa HEAT EXCHANGER SOURCE SIDE IN HEATING Water flow (3) m 3 /h Pressure drop (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 23 o C/18 o C; Source (side) heat exchanger water (in/out) 30 o C/35 o C. 2. Values in compliance with EN : Plant (side) heat exchanger water (in/out) 30 o C/35 o C; Source (side) heat exchanger water (in/out) 0 o C/3 o C (Gly 225%). 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 43

44 BWR MTD2/S - Application Hydronic Terminal Ground Source BWR MTD2/S 0025ts 0031ts 0041ts 0061ts 0071ts 0091ts 01011ts 0121ts Power supply V/ph/Hz 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 COOLING ONLY (GROSS VALUE) Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) COOLING ONLY (EN14511 VALUE) Cooling capacity (1)(2) kw EER (1)(2) ESEER (1)(2) Cooling energy class F G G F F F F E HEATING ONLY (GROSS VALUE) Total heating (3) kw capacity Total power input (3) kw COP (3) HEATING ONLY (EN14511 VALUE) Total heating capacity (3)(2) kw COP (3)(2) Cooling energy class G G G F G F G F Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (3) m 3 /h Available unit's head (3) kpa HEAT EXCHANGER SOURCE SIDE IN REFRIGERATION Water flow (1) m 3 /h Pressure drop (1) kpa HEAT EXCHANGER SOURCE SIDE IN HEATING Water flow (3) m 3 /h Pressure drop (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Source (side) heat exchanger water (in/out) 30 o C/35 o C. 2. Values in compliance with EN : Plant (side) heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger water (in/out) 0 o C/3 o C (Gly 225%). 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 44

45 BWR DHW2 Reversible ground heat pump with total heat recovery 5kW - 34kW Versions BWR DHW2 Reversible heat pump with domestic hot water production and total heat recovery. Unit Description Designed specifically for ground systems, these reversible heat pumps offer year round operation in any mode; single cycle (air conditioning, heating, domestic hot water) as well as combined cycle in total heat recovery. In summer months, the production of hot water is free thanks to the full recovery of heat which can achieve water temperatures of up to 65 C. The advanced electronic regulation ensures high operational flexibility with fast working conditions for a significant increase in overall COP levels. This unit offers, the possibility to completely eliminate the use of a traditional boiler, making the BWR DHW2 the ideal energy saving application for commercial and residential applications. Commands Nadi System electronic control system provides great flexibility offering: Back light Outdoor temperature sensor for water on the plant side Six daily time bands Up to four heat pumps in cascade control User friendly management system A zone for direct heating for radiator, floor heating or fan coil A zone with mix valve for floor heating Electrical heating element for possible integration and anti-legionellosis cycle for cylinder Boiler or electric heater Features Case panels insulated with low noise material for super silent operation Rubber vibration damper Hermetic scroll compressors equipped with crankcase heater and thermal protection High efficiency stainless steel plate type heat exchanger with low pressure drop Soft starter Phase sequencer control Accessories Wired room terminal with back light display, humidity and temperature probe Extension module for system configuration Three-way valve for domestic hot water Electric heater for the integration of a heating system Electric heater for hot water cylinder with integration for anti-legionella Cascade management kit Serial card RS485 for ModBus Buffer tank Hot water cylinder 45

46 BWR DHW2 - Application Hydronic Terminal - Ground Source BWR DHW2 0011ms 0025ms 0031ms 0041ms 0025t 0031t 0041t 0061t 0071t 0091t 0101t 0121t Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 COOLING ONLY Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) HEATING ONLY Total heating capacity (2) kw Total power input (2) kw COP (2) COOLING WITH TOTAL HEAT RECOVERY Cooling capacity with total heat recovery (3) kw Total power input (3) kw Recovery heat exchanger capacity (3) kw TOTAL RECOVERY ONLY Total heating capacity (2) kw Total power input (2) kw Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (2) m 3 /h Available unit's head (2) kpa HEAT EXCHANGER SOURCE SIDE IN REFRIGERATION Water flow (1) m 3 /h Pressure drop (1) kpa HEAT EXCHANGER SOURCE SIDE IN HEATING Water flow (2) m 3 /h Pressure drop (2) kpa HEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATION Water flow (3) m 3 /h Pressure drop (3) kpa HEAT EXCHANGER RECOVERY USER SIDE IN HEATING Water flow (3) m 3 /h Pressure drop (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Source (side) heat exchanger water (in/out) 30 o C/35 o C. 2. Plant (side) heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger water (in/out) 0 o C/-3 o C (Gly 225%). 3. Plant (side) cooling exchanger water (in/out) 12 o C/7 o C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45 o C/50 o C. 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 46

47 BWR DHW2 - Application Floor Heating - Ground Source BWR DHW2 0011ms 0025ms 0031ms 0041ms 0025t 0031t 0041t 0061t 0071t 0091t 0101t 0121t Power supply V/ph/Hz 230/1/50 230/1/50 230/1/50 230/1/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 400/3/50 COOLING ONLY Cooling capacity (1) kw Total power input (1) kw EER (1) ESEER (1) HEATING ONLY Total heating capacity (2) kw Total power input (2) kw COP (2) COOLING WITH TOTAL HEAT RECOVERY Cooling capacity with total heat recovery (3) kw Total power input (3) kw Recovery heat exchanger capacity (3) kw TOTAL RECOVERY ONLY Total heating capacity (2) kw Total power input (2) kw Water flow (1) m 3 /h Available unit's head (1) kpa HEAT EXCHANGER USER SIDE IN HEATING Water flow (2) m 3 /h Available unit's head (2) kpa HEAT EXCHANGER SOURCE SIDE IN REFRIGERATION Water flow (1) m 3 /h Pressure drop (1) kpa HEAT EXCHANGER SOURCE SIDE IN HEATING Water flow (2) m3/h Pressure drop (2) kpa HEAT EXCHANGER RECOVERY USER SIDE IN REFRIGERATION Water flow (3) m3/h Pressure drop (3) kpa HEAT EXCHANGER RECOVERY USER SIDE IN HEATING Water flow (3) m3/h Pressure drop (3) kpa Compressors nr. N No. circuits N Noise power (4) db(a) Noise pressure (5) db(a) A (6) mm B (6) mm H (6) mm Operating weight (6) kg Plant (side) cooling exchanger water (in/out) 23 o C/18 o C; Source (side) heat exchanger water (in/out) 30 o C/35 o C. 2. Plant (side) heat exchanger water (in/out) 40 o C/45 o C; Source (side) heat exchanger water (in/out) 0 o C/-3 o C (Gly 225%). 3. Plant (side) cooling exchanger water (in/out) 23 o C/18 o C; Plant (auxiliary side) heat exchanger recovery water (in/out) 45 o C/50 o C. 4. Sound power on the basis of measurements made in compliance with ISO 9614 and Eurovent 8/1 for Eurovent certified units; in compliance with ISO 3744 for non-certified units. 5. Average sound pressure level at 1m distance, unit in a free field on a reflective surface; non-binding value obtained from the sound power level. 6. Unit in standard configuration/execution, without optional accessories. 47

48 Contact Us Group Companies Head Office South ICS House Stephenson Road Calmore Industrial Estate Totton, Southampton SO40 3RY Freephone: T +44 (0) F +44 (0) London London NW9 8UA T +44 (0) Midlands Birmingham B46 1HT T +44 (0) F +44 (0) North Bradford BD1 5EP T +44 (0) F +44 (0) Scotland Glasgow G72 0XB T +44 (0) F +44 (0) Ireland Kells, Co Meath T +353 (0) M+353 (0) Heat Pump Brochure V1 Oct 013

AWR MTD2 XE. Versions

AWR MTD2 XE. Versions Versions ETING COOLING OT WTER ETING COOLING OT WTER ir/water reversible heat pump for water heating up to 58 C and operating limits down to -15 C external air temperature and domestic hot water production.

More information

AIR COOLED HEAT PUMP FOR OUTDOOR INSTALLATION FROM 4,2 TO 35,1 kw

AIR COOLED HEAT PUMP FOR OUTDOOR INSTALLATION FROM 4,2 TO 35,1 kw COMFORT HEAT PUMPS AIR COOLED HEAT PUMP FOR OUTDOOR INSTALLATION FROM 4,2 TO 35,1 kw climaveneta.com COMFORT HEAT PUMPS PERFECT COMFORT AND MAXIMUM EFFICIENCY Air to water heat pump for outdoor installation,

More information

HYDRONIC RESIDENTIAL

HYDRONIC RESIDENTIAL HYDRONIC RESIDENTIAL Chillers, reversible heat pumps and modular units for small and medium applications. Climaveneta. brand of Mitsubishi Electric Hydronics & IT Cooling Systems, presents the mini chiller

More information

AIR-COOLED LIQUID CHILLER FOR OUTSIDE INSTALLATION FROM 4,3 TO 35,1 kw

AIR-COOLED LIQUID CHILLER FOR OUTSIDE INSTALLATION FROM 4,3 TO 35,1 kw COMFORT CHILLERS AIR-COOLED LIQUID CHILLER FOR OUTSIDE INSTALLATION FROM 4,3 TO 35,1 kw climaveneta.com COMFORT CHILLERS PERFECT COMFORT AND MAXIMUM EFFICIENCY Air-cooled liquid chiller for outside installation

More information

i-nrg 0061m 0061t Reversible heat pump with inverter compressor, total heat recovery, air source for indoor/outdoor installation 16,3 kw PRANA

i-nrg 0061m 0061t Reversible heat pump with inverter compressor, total heat recovery, air source for indoor/outdoor installation 16,3 kw PRANA RANA i-nrg 0061m 0061t Versioni i-nrg Reversible heat pump with inverter compressor, total heat recovery, air source for indoor/outdoor installation Features Reversible heat pump with inverter compressor,

More information

AIR COOLED CHILLER FOR OUTDOOR INSTALLATION FROM 4,3 TO 35,1 kw

AIR COOLED CHILLER FOR OUTDOOR INSTALLATION FROM 4,3 TO 35,1 kw PROCESS CHILLERS AIR COOLED CHILLER FOR OUTDOOR INSTALLATION FROM 4,3 TO 35,1 kw climaveneta.com PROCESS CHILLERS MAXIMUM EFFICIENCY IN EVERY TYPE OF PROCESS APPLICATION Air cooled liquid chiller for outdoor

More information

LZT High efficiency air to water heat pumps with E.V.I. compressors

LZT High efficiency air to water heat pumps with E.V.I. compressors High efficiency air to water heat pumps with E.V.I. compressors -20 C +43 C +65 C E.V.I. C.O.P. 4,1 The series of high efficiency heat pumps has been specifically designed for use with radiant floor heating

More information

TOTAL HEAT RECOVERY MULTI-PURPOSE HEAT PUMPS

TOTAL HEAT RECOVERY MULTI-PURPOSE HEAT PUMPS TOTAL HEAT RECOVERY MULTI-PURPOSE HEAT PUMPS Energy saving thanks to a total recovery p Cooling Heating/DHW h Galletti multi-purpose heat pumps are total recovery units used for a simultaneous hot and

More information

SMART. 4,9 49,5 kw. Air cooled liquid chillers and heat pumps equipped with scroll compressor and axial fans T_SMT_0609_GB

SMART. 4,9 49,5 kw. Air cooled liquid chillers and heat pumps equipped with scroll compressor and axial fans T_SMT_0609_GB T_SMT_0609_GB 4,9 49,5 kw Air cooled liquid chillers and heat pumps equipped with scroll compressor and axial fans INDEX SERIES IDENTIFICATION... 3 MODEL IDENTIFICATION... 3 CE CONFORMITY... 3 WORKING

More information

CZT CZT. High efficiency air to water heat pumps with E.V.I. compressors E.V.I. HP OTHER VERSIONS ACCESSORIES

CZT CZT. High efficiency air to water heat pumps with E.V.I. compressors E.V.I. HP OTHER VERSIONS ACCESSORIES High efficiency air to water heat pumps with E.V.I. compressors infolinia: +48 691 262 691-15 C +63 C +43 C E.V.I. HP The series of high efficiency heat pumps has been specifically designed for use with

More information

Modular Air-cooled Chillers

Modular Air-cooled Chillers Modular Air-cooled Chillers High Seasonal Efficiency (HSE) version Cooling capacity 48-232 kw Trane Flex Series Modular air/water chillers with axial EC fans, inverter driven scroll compressors and microchannel

More information

CMA TECHNICAL MANUAL CONDENSING UNITS FOR OUTDOOR INSTALLATION O L S A F RA N

CMA TECHNICAL MANUAL CONDENSING UNITS FOR OUTDOOR INSTALLATION O L S A F RA N E S A RE F R E IG RA N T G TECHNICAL MANUAL -FRIEND Y CONDENSING UNITS FOR OUTDOOR INSTALLATION O L CMA C 2 The manufacturer declines all the responsabilities regarding inaccuracies contained in this manual,

More information

PRODUCT GUIDE

PRODUCT GUIDE PRODUCT GUIDE 01.2017 Cooling Heating CHAPTER 1 AIRCOOLED LIQUID CHILLERS AND HEAT PUMPS FOR RESIDENTIAL & LIGHT COMMERCIAL APPLICATION Power (kw) Page IACAK/II/WP 101.5 106 0 58 115 A CLASS energy efficiency

More information

NRP MULTIPURPOSE HEAT PUMPS 2 AND 4-PIPE SYSTEMS PLUS PRODUCTION OF DOMESTIC HOT WATER

NRP MULTIPURPOSE HEAT PUMPS 2 AND 4-PIPE SYSTEMS PLUS PRODUCTION OF DOMESTIC HOT WATER NRP MULTIPURPOSE HEAT PUMPS AND 4-PIPE SYSTEMS PLUS PRODUCTION OF DOMESTIC HOT WATER Multipurpose air cooled units with axial fans. For external installation. High efficiency version. NRP MULTIPURPOSE

More information

Technical Catalogue. Air-Cooled Liquid Chillers with screw compressors Nominal cooling capacity: kw 50 Hz

Technical Catalogue. Air-Cooled Liquid Chillers with screw compressors Nominal cooling capacity: kw 50 Hz EN Technical Catalogue Air-Cooled Liquid Chillers with screw compressors Nominal cooling capacity: 321-1308 kw 50 Hz EKV/BS business Air cooled water chillers for outdoor installation. Flexibility in the

More information

EASY_R R407C. Air cooled liquid chillers and heat pumps equipped with scroll compressor and axial fans. 5,2 41,5 kw T_ESY_R_0508_GB

EASY_R R407C. Air cooled liquid chillers and heat pumps equipped with scroll compressor and axial fans. 5,2 41,5 kw T_ESY_R_0508_GB R407C EASY_R Air cooled liquid chillers and heat pumps equipped with scroll compressor and axial fans 5,2 41,5 kw T_ESY_R_0508_GB EASY_R R407C INDEX WORKING LIMITS... 3 SERIES IDENTIFICATION... 4 MODEL

More information

Epsilon Echos kw. General information Air-Water unit with scroll compressors driven by DC inverter. Unique selling points

Epsilon Echos kw. General information Air-Water unit with scroll compressors driven by DC inverter. Unique selling points Epsilon Echos+ 5 38 kw General information Air-Water unit with scroll compressors driven by DC inverter Configuration /LN: Low noise unit /HP: Reversible heat pump /LE /HP: Reversible condensing unit Unique

More information

> HGA AIR - WATER HEAT PUMPS FOR OUTDOOR INSTALLATION. Available range. Unit description. Options. Accessories

> HGA AIR - WATER HEAT PUMPS FOR OUTDOOR INSTALLATION. Available range. Unit description. Options. Accessories > HGA AIR - WATER HEAT PUMPS FOR OUTDOOR INSTALLATION Available range Unit type IP Reversible heat pump (reversible on the refrigerant side) ECO-FRIENDLY REFRIGERANT GAS Versions (heat recovery) VB Base

More information

Multi-pipe Units with Scroll Compressors. Model CMAA Cooling capacity kw Heating capacity kw

Multi-pipe Units with Scroll Compressors. Model CMAA Cooling capacity kw Heating capacity kw Multi-pipe Units with Scroll Compressors Model CMAA Cooling capacity 45-485 kw Heating capacity 50-670 kw CMAA multi-pipe units Simultaneous heating and cooling with one product Standard versions Acoustic

More information

Saving energy comes naturally to us.

Saving energy comes naturally to us. Domestic Heat Pumps Saving energy comes naturally to us. Low carbon solutions for heating and hot water The sustainable heating solution for today and tomorrow Home heating with lashings of hot water Whether

More information

LZA High efficiency air to water heat pumps with HP compressor

LZA High efficiency air to water heat pumps with HP compressor High efficiency air to water heat pumps with HP compressor -10 C +43 C +60 C HP C.O.P. 4,1 The series of high efficiency heat pumps has been specifically designed for use with radiant floor heating systems

More information

CZT CZT E.V.I. High efficiency air to water heat pumps with E.V.I. compressors OTHER VERSIONS ACCESSORIES

CZT CZT E.V.I. High efficiency air to water heat pumps with E.V.I. compressors OTHER VERSIONS ACCESSORIES High efficiency air to water heat pumps with E.V.I. compressors -15 C +63 C E.V.I. The series of high efficiency heat pumps has been specifically designed for use with radiant floor heating systems or

More information

i-chiller 181 to 210 kw ic770 to ic780 ABOUT THE i-chiller RANGE RELIABILITY: ENERGY & PROCESS EFFICIENCY: EASE OF OPERATION & MAINTENANCE:

i-chiller 181 to 210 kw ic770 to ic780 ABOUT THE i-chiller RANGE RELIABILITY: ENERGY & PROCESS EFFICIENCY: EASE OF OPERATION & MAINTENANCE: ABOUT THE i-chiller RANGE The fully packaged, EcoDesign compliant, air-cooled i-chiller range is designed specifically for reliable and efficient process cooling. The unique evaporator is immersed within

More information

EKS/HE. MultiScroll Air-cooled liquid chillers High efficiency. Solution B - Base I - Integrata

EKS/HE. MultiScroll Air-cooled liquid chillers High efficiency. Solution B - Base I - Integrata EKS/HE Refrigerant R410A GWP=2.088 Scroll Compressor Shell & Tube exchanger Axial fan Brazed plate heat exchanger MultiScroll Air-cooled liquid chillers High efficiency Solution B - Base I - Integrata

More information

ELFOEnergy Duct Inverter

ELFOEnergy Duct Inverter Technical Bulletin BT14E002GB-02(EC1) ELFOEnergy Duct Inverter Air-water ductable liquid chiller for indoor or outdoor installation SERIES WSA-XIN 21-141 Nominal cooling capacity (A35/W7) da 4 a 31 kw

More information

WZT High Efficiency Air to Water Split System Heat Pumps With E.V.I. Compressors

WZT High Efficiency Air to Water Split System Heat Pumps With E.V.I. Compressors High Efficiency ir to Water Split System Heat Pumps With E.V.I. ompressors -20 +43 +65 HP E.V.I..O.P. 4,1 The series of high efficiency heat pumps has been specifically designed for use with radiant floor

More information

LZT LZT E.V.I. High efficiency air to water heat pumps with E.V.I. compressors OTHER VERSION ACCESSORIES

LZT LZT E.V.I. High efficiency air to water heat pumps with E.V.I. compressors OTHER VERSION ACCESSORIES High efficiency air to water heat pumps with E.V.I. compressors -15 +63 E.V.I..O.P. 4,1 The series of high efficiency heat pumps has been specifically designed for use with radiant floor heating systems

More information

THE HEAT PUMP CHOICE OF PROFESSIONALS

THE HEAT PUMP CHOICE OF PROFESSIONALS THE HEAT PUMP CHOICE OF PROFESSIONALS T H E E N E R G Y E F F I C I E N T H E AT I N G S Y S T E M TIME FOR ENERGY EFFICIENT AND INNOVATIVE SOLUTIONS Expectations of consumers are changing. With the high

More information

black Thermal power (A7:W45) kw Cooling power (A35;W7) kw

black Thermal power (A7:W45) kw Cooling power (A35;W7) kw black Thermal power (A7:W45) 35 60 kw Cooling power (A35;W7) 32 56 kw High efficiency and high temperature air/water heat pump with axial fans and scroll compressors 134a H 2 O 80 CONTROL MINIBOSS black

More information

Neosys Product catalogue

Neosys Product catalogue 00/0 Neosys Product catalogue Providing indoor climate comfort NEOSYS 00 0 kw Air cooled chiller/heat pump YEAR WARRANTY* Quality makes the difference* Introduction to the range NEOSYS is providing chilled

More information

Galletti Water chillers and heat pumps catalogue

Galletti   Water chillers and heat pumps catalogue Galletti www.galletti.it Water chillers and heat pumps catalogue Table of Contents/SMALL SYSTEMS MPI DC Water chillers and heat pumps with inverter compressor 6 models page 6 MCE MPE Air condensed water

More information

LZT High efficiency air to water heat pumps with E.V.I. compressors

LZT High efficiency air to water heat pumps with E.V.I. compressors High efficiency air to water heat pumps with E.V.I. compressors -20 +43 +65 E.V.I..O.P. 4,1 The series of high efficiency heat pumps has been specifically designed for use with radiant floor heating systems

More information

ELFOEnergy Extended Inverter

ELFOEnergy Extended Inverter Technical Bulletin BT14F009GB-03 ELFOEnergy Extended Inverter AIR-COOLED INVERTER CHILLER FOR OUTDOOR INSTALLATION WSAT-XIN 21-171 RANGE PREMIUM Version Nominal cooling capacity (A35/W7) from 4 to 30 kw

More information

GPE Kc UNITS FOR 4-PIPE SYSTEMS WITH SCROLL COMPRESSORS. COOLING CAPACITY FROM 77 TO 426 kw - 2 COOLING CIRCUITS. GPE 802 Kc + CF + GP + MV + P1

GPE Kc UNITS FOR 4-PIPE SYSTEMS WITH SCROLL COMPRESSORS. COOLING CAPACITY FROM 77 TO 426 kw - 2 COOLING CIRCUITS. GPE 802 Kc + CF + GP + MV + P1 UNITS FOR 4-PIPE SYSTEMS WITH SCROLL COMPRESSORS COOLING CAPACITY FROM 77 TO 426 kw - 2 COOLING CIRCUITS GPE 802 Kc + CF + GP + MV + P1 130 Above picture is only indicative and is not binding. AIR R-410A

More information

COMFORT HYDRONIC TERMINALS

COMFORT HYDRONIC TERMINALS COMFORT HYDRONIC TERMINALS i i-chd NEW GENERATION CASSETTE WITH EC HIGH EFFICIENCY MOTOR. CENTRIFUGAL FAN WITH CONTINUOUS AIR FLOW REGULATION AND SPEED MODULATION. ENERGY CONSUMPTION REDUCED BY MORE THAN

More information

CMA CONDENSING UNITS FOR OUTDOOR INSTALLATION INSTALLATION AND OPERATION MANUAL

CMA CONDENSING UNITS FOR OUTDOOR INSTALLATION INSTALLATION AND OPERATION MANUAL CMA CONDENSING UNITS FOR OUTDOOR INSTALLATION ECO-FRIENDLY REFRIGERANT GAS INSTALLATION AND OPERATION MANUAL Dear Customer, Thank you for having purchased a FERROLI product. It is the result of many years

More information

PRODUCT RANGE HEAT PUMPS 2012

PRODUCT RANGE HEAT PUMPS 2012 PRODUCT RANGE HEAT PUMPS 2012 TABLE OF CONTENTS Product range...4 Heat pump system benefits...6 Is the heat pump considered as a "RENEWABLE SOURCE"?...8 ENERGETIC advantage of the heat pump...10 ECONOMIC

More information

Air Cooled Chillers & Heat Pumps WinPACK HE-A

Air Cooled Chillers & Heat Pumps WinPACK HE-A Air Cooled Chillers & Heat Pumps WinPACK HE-A TCAEY-THAEY 2110-4340 1 Air Cooled Chillers & Heat Pumps WinPACK HE-A TCAEY-THAEY 2110-4340 Cooling capacity: 91,6-345 kw Heating capacity: 110,5-357 kw Class

More information

CHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 47 to 78 kw

CHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 47 to 78 kw TECHNICAL INSTRUCTIONS CHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 47 to 78 kw CHGV CHGV 64 CHGV 72 CHGV 80 PHRV heat pump model also available May 2006 10 12 167 - GB - 00 MARKING

More information

AIR TO WATER UNITS WITH SCROLL COMPRESSORS AND CENTRIFUGAL FANS (PLUG FAN), FOR INDOOR INSTALLATION kw

AIR TO WATER UNITS WITH SCROLL COMPRESSORS AND CENTRIFUGAL FANS (PLUG FAN), FOR INDOOR INSTALLATION kw PROCESS CHILLERS HEAT PUMPS AIR TO WATER UNITS WITH SCROLL COMPRESSORS AND CENTRIFUGAL FANS (PLUG FAN), FOR INDOOR INSTALLATION 17-290 kw climaveneta.com PROCESS CHILLERS HEAT PUMPS A TRULY UNIQUE SOLUTION

More information

EWAD-TZ. Air cooled chiller with R-134a inverter driven screw compressor

EWAD-TZ. Air cooled chiller with R-134a inverter driven screw compressor Air cooled chiller with R-134a inverter driven screw compressor New inverter compressor technology Today, Daikin is leading the way towards more efficient and cost-effective comfort solutions. All Daikin

More information

ELFOEnergy Extended Inverter

ELFOEnergy Extended Inverter Technical Bulletin BT14F008GB-00 ELFOEnergy Extended Inverter Air cooled inverter heat pump for outdoor installation WSAN-XIN 21-171 RANGE PREMIUM Version Nominal heating capacity (A7/W45) from 5 to 32

More information

BETA ECHOS. Air/water cooled chillers and heat pumps kw. General BETA ECHOS is a range of chillers and ductable air-water heat pumps.

BETA ECHOS. Air/water cooled chillers and heat pumps kw. General BETA ECHOS is a range of chillers and ductable air-water heat pumps. Air/water cooled chillers and heat pumps 41 303 kw General BETA ECHOS is a range of chillers and ductable air-water heat pumps. Configurations HP: Reversible heat pump LE: For connection to remote evaporator

More information

FOCS. Climaveneta Technical Bulletin FOCS_0751_1301_200909_GB. Air-cooled water chiller with helical fans kw

FOCS. Climaveneta Technical Bulletin FOCS_0751_1301_200909_GB. Air-cooled water chiller with helical fans kw Climaveneta Technical Bulletin _0751_1301_200909_GB 0751-1301 145-516 kw Air-cooled water chiller with helical fans (The photo of the unit is indicative and may change depending on the model) Flexibility

More information

LCP kw. Outdoor monobloc air-water unit. Total heat recovery multi-purpose units LCP PLUS

LCP kw. Outdoor monobloc air-water unit. Total heat recovery multi-purpose units LCP PLUS Total heat recovery multi-purpose units LCP Outdoor monobloc air-water unit LCP - kw Heating, cooling, domestic hot water one single system to meet all kinds of needs. Total heat recovery multi-purpose

More information

SPECIFICATION GUIDE NEOSYS. Air-cooled Liquid Chiller for outdoor installation (NAC) Nominal cooling capacity: 200 to 460 kw

SPECIFICATION GUIDE NEOSYS. Air-cooled Liquid Chiller for outdoor installation (NAC) Nominal cooling capacity: 200 to 460 kw SPECIFICATION GUIDE NEOSYS Air-cooled Liquid Chiller for outdoor installation (NAC) Nominal cooling capacity: 200 to 460 kw Air-to-water Heat Pump for outdoor installation (NAH) Nominal cooling capacity:

More information

SA 1 INDEX Available versions...pag. 4 Structure of electro-galvanized and painted steel sheet...pag. 5 Ecological refrigerant R410A...pag. 5 Scroll compressors...pag. 6 Condenser coils...pag. 6 Brazed

More information

Air cooled industrial chillers

Air cooled industrial chillers Air cooled industrial chillers Main features R410A refrigerant Cooling capacity 5 175 kw Air cooled industrial chillers Models Versions HE High Efficiency Finned coil evaporators submerged in the storage

More information

30RB Air-Cooled Liquid Chillers. Nominal cooling capacity 8-14 kw. Features. Quiet operation

30RB Air-Cooled Liquid Chillers. Nominal cooling capacity 8-14 kw. Features. Quiet operation Air-Cooled Liquid Chillers www.eurovent-certification.com www.certiflash.com Quality Management Systems 0RB 008-05 Nominal cooling capacity 8- The new generation of Aquasnap liquid chillers was designed

More information

NEOSYS. AIR TO WATER LIQUID CHILLER kw. AIR TO WATER HEAT PUMP kw. lennoxemea.com

NEOSYS. AIR TO WATER LIQUID CHILLER kw. AIR TO WATER HEAT PUMP kw. lennoxemea.com NEOSYS AIR TO WATER LIQUID CHILLER 200-1000 kw AIR TO WATER HEAT PUMP 200-500 kw lennoxemea.com NEOSYS, winning ENERGY PERFORMANCE The NEOSYS delivers energy efficiency at full and partial load by the

More information

BRAN. Climaveneta Technical Bulletin BRAN_0011_0121_201211_EN ,6-31,3 kw. Reversible unit, air source for outdoor installation

BRAN. Climaveneta Technical Bulletin BRAN_0011_0121_201211_EN ,6-31,3 kw. Reversible unit, air source for outdoor installation Climaveneta Technical Bulletin BRAN_0011_0121_201211_EN BRAN r HFC R-410A 0011-0121 4,6-31,3 kw Reversible unit, air source for outdoor installation (The photo of the unit is indicative and may change

More information

BRH. Climaveneta Technical Bulletin. Water-cooled liquid chillers ,5-35,1 kw. Versatile High efficiency Maximum silent-running

BRH. Climaveneta Technical Bulletin. Water-cooled liquid chillers ,5-35,1 kw. Versatile High efficiency Maximum silent-running Climaveneta Technical Bulletin BRH_0011_0121_201211_EN BRH r HFC R-410A 0011-0121 5,5-35,1 kw Water-cooled liquid chillers (The photo of the unit is indicative and may change depending on the model) Versatile

More information

Chillers, air and water cooled, featuring centrifugal compressors with magnetic levitation, from 200 to kw

Chillers, air and water cooled, featuring centrifugal compressors with magnetic levitation, from 200 to kw Chillers, air and water cooled, featuring centrifugal compressors with magnetic levitation, from 200 to 1.99 kw Centrifugal compressor with magnetic levitation This is a miniaturized, highly innovative

More information

LZT LZT. High efficiency air to water heat pumps with E.V.I. compressors E.V.I. A + A + VERSIONS ACCESSORIES

LZT LZT. High efficiency air to water heat pumps with E.V.I. compressors E.V.I. A + A + VERSIONS ACCESSORIES High efficiency air to water heat pumps with E.V.I. compressors + + -0 +43 +65 E.V.I. The series of high efficiency heat pumps has been specifically designed for use with radiant floor heating systems

More information

Kälte Klima. Air cooled liquid chiller Free-Cooling from 45 kw to 385 kw. Scroll Compressors SCAEY-FC DE 98

Kälte Klima. Air cooled liquid chiller Free-Cooling from 45 kw to 385 kw. Scroll Compressors SCAEY-FC DE 98 Air cooled liquid chiller Free-Cooling from 45 kw to 385 kw Scroll Compressors Series: SCAEY-FC Leaflet: DE 98 Issue: 01/16 Supersedes: 12/13 Identification code Index Index... pag. 2 Identification code...»

More information

Air-Cooled Variable Speed Drive Screw Chillers. Super Efficient Super Quiet. Cooling Capacity Range kw R134a

Air-Cooled Variable Speed Drive Screw Chillers. Super Efficient Super Quiet. Cooling Capacity Range kw R134a Air-Cooled Variable Speed Drive Screw Chillers Super Efficient Super Quiet Cooling Capacity Range 540-1405 kw R134a World s first low sound Air-Cooled variable speed drive screw chiller The recognition

More information

Blue Box Epsilon Echos +

Blue Box Epsilon Echos + Blue Box Epsilon Echos + 5 38 kw General information Air-Water unit with scroll compressors driven by DC inverter Packaged version in 5 sizes Nominal cooling capacity (A35;W7): 6 26 kw Nominal heating

More information

NECS-N. Climaveneta Technical Bulletin. Reversible unit, air source for outdoor installation. 0202T T kw

NECS-N. Climaveneta Technical Bulletin. Reversible unit, air source for outdoor installation. 0202T T kw Climaveneta Technical Bulletin NECS_N_0202T_0612T_201211_EN r HFC R-410A 0202T - 0612T 53-159 kw Reversible unit, air source for outdoor installation (The photo of the unit is indicative and may change

More information

CRIMSON & CRIMSON MAX

CRIMSON & CRIMSON MAX High efficiency water/water and geothermal heat pumps 5 114 General High efficiency water/water and geothermal heat pumps. Ideal for heating, cooling and production of domestic hotwater with total or partial

More information

AIR TO WATER HEAT PUMPS. Hot water and comfortable ambient temperature all year round

AIR TO WATER HEAT PUMPS. Hot water and comfortable ambient temperature all year round AIR TO WATER HEAT PUMPS Hot water and comfortable ambient temperature all year round HEAT PUMP PRINCIPLE CARRIER. A UNITED TECHNOLOGIES COMPANY Whether you need air conditioning for a new building or a

More information

Kälte Klima. Air cooled liquid chiller Free-Cooling from 45 kw to 365 kw. Scroll Compressors SCAEY-FC DE 98

Kälte Klima. Air cooled liquid chiller Free-Cooling from 45 kw to 365 kw. Scroll Compressors SCAEY-FC DE 98 Air cooled liquid chiller Free-Cooling from 45 kw to 365 kw Scroll Compressors Series: SCAEY-FC Leaflet: DE 98 Issue: 04/11 Supersedes: 12/10 Identification code Index Index... pag. 2 Identification code...»

More information

MPE 4-76 kw. Outdoor monobloc unit. Air chillers and heat pumps MPE PLUS. Efficiency under all operating conditions. 152 galletti.

MPE 4-76 kw. Outdoor monobloc unit. Air chillers and heat pumps MPE PLUS. Efficiency under all operating conditions. 152 galletti. Air chillers and heat pumps MPE Outdoor monobloc unit MPE - kw Efficiency under all operating conditions Rotary compressor PLUS Scroll compressor R-0A R-0A refrigerant Cooling only Cooling / Heating Monobloc

More information

Conditioning your ambient, maximising your comfort.

Conditioning your ambient, maximising your comfort. High efficiency water cooled chillers, heat pumps and evaporating units with screw compressors and R134a refrigerant gas. Cooling capacity 378 1554 kw Heating capacity 425 1744 kw Cooling capacity evaporating

More information

H4T R410A. refrigerant

H4T R410A. refrigerant H4T INDEX Polyvalent unit working modes...pag. 4 Available versions...pag. 4 Structure of electro-galvanized and painted steel sheet...pag. 5 Ecological refrigerant R410A...pag. 5 Scroll compressors...pag.

More information

Zeta Rev LN HP Prochill Bluebox Print Date: 07/17/2017

Zeta Rev LN HP Prochill Bluebox Print Date: 07/17/2017 Zeta Rev LN HP 10.2 Configured unit accessories 1PS - One user-side pump with tank LN - Low noise RG - Condensation control with fan speed regulator CSP - Set point compensation depending on external air

More information

Geolo THE GROUND SOURCE HEAT PUMP PLUSES

Geolo THE GROUND SOURCE HEAT PUMP PLUSES Geolo THE GROUND SOURCE HEAT PUMP PLUSES RENEWABLE TECHNOLOGIES Geolo is able to exploit the Energy present in the water and underground thanks to the geothermal exchangers. Soil and water absorb the solar

More information

WZH Ground source heat pumps

WZH Ground source heat pumps Ground source heat pumps infolinia: +48 691 262 691 +60 C C.O.P. 5,1 HP heat pumps are particularly suitable for applications that utilise well water or ground source probes. These units have been designed

More information

30RB Air-Cooled Liquid Chillers PRODUCT SELECTION DATA. Easy and fast installation. Compact, reliable and efficient

30RB Air-Cooled Liquid Chillers PRODUCT SELECTION DATA. Easy and fast installation. Compact, reliable and efficient PRODUCT SELECTION DATA Easy and fast installation Compact, reliable and efficient Class A variable speed circulator available Air-Cooled Liquid Chillers 0RB 008-015 CARRIER participates in the ECP programme

More information

EVI + INVERTER MODELS A Q U A P U R A

EVI + INVERTER MODELS A Q U A P U R A W W W L V P R E N E W A B L E S I E A Q U A P U R A H E A T I N G & C O O L I N G AIR TO WATER HEAT PUMPS A++ 35ºC A+ 55ºC EVI + INVERTER MODELS REPLACE YOUR OIL / GAS BOILER IDEAL FOR UNDERFLOOR HEATING

More information

Air cooled chillers. Air cooled chillers with brushless oil-free compressors. RAC. Ka Series - 1 or 2 cooling circuits capacity from 300 to 1400 kw

Air cooled chillers. Air cooled chillers with brushless oil-free compressors. RAC. Ka Series - 1 or 2 cooling circuits capacity from 300 to 1400 kw Air cooled chillers with brushless oil-free compressors R-134a RAC. Ka Series - 1 or 2 cooling circuits capacity from 300 to 1400 kw External installation with very low sound level Cooling circuit with

More information

30GH Air-Cooled Liquid Chillers 30GH Nominal cooling capacity kw

30GH Air-Cooled Liquid Chillers 30GH Nominal cooling capacity kw Air-Cooled Liquid Chillers Nominal cooling capacity 21-94 kw Carrier is participating in the Eurovent Certification Programme. Products are as listed in the Eurovent Directory of Certified Products. The

More information

Reinventing Energy Efficiency WARMNESS.

Reinventing Energy Efficiency WARMNESS. Residential WATER2WATER WT SERIES Reinventing Energy Efficiency WARMNESS www.fhp-mfg.com Environmental stewardship is a core philosophy for FHP Manufacturing from design to production to the reduction

More information

The Energy Solutions of Withair Heat Pumps Catalogue 2017 Take Control of Your Energy Future!

The Energy Solutions of Withair Heat Pumps Catalogue 2017 Take Control of Your Energy Future! www.withairmall.com The Energy Solutions of Withair Heat Pumps Catalogue 2017 Take Control of Your Energy Future! Withair offers a wide range of clean energy products and solutions to meet the needs of

More information

AIR COOLED CHILLERS FOR OUTDOOR INSTALLATION WITH INTEGRATED FREE COOLING MULTISCROLL SERIES

AIR COOLED CHILLERS FOR OUTDOOR INSTALLATION WITH INTEGRATED FREE COOLING MULTISCROLL SERIES AIR COOLED CHILLERS FOR OUTDOOR INSTALLATION WITH INTEGRATED FREE COOLING MULTISCROLL SERIES COOLING CAPACITY FROM 76 TO 612 Kw 1 AND 2 COOLING CIRCUITS RAE 1702 F Kc + P2 28 Above picture is only indicative

More information

LSA LSA A + Air cooled water chillers with axial fans VERSIONS ACCESSORIES

LSA LSA A + Air cooled water chillers with axial fans VERSIONS ACCESSORIES LS ir cooled water chillers with axial fans + LS The LS water chiller range has been designed for small and medium residential and commercial applications. They are suitable for generating chilled water

More information

SOLUTIONS DE TRAITEMENT HEATING SOLUTIONS. Comfort Module 5-20 kw. Choose the easy heating solution!

SOLUTIONS DE TRAITEMENT HEATING SOLUTIONS. Comfort Module 5-20 kw. Choose the easy heating solution! SOLUTIONS DE TRAITEMENT HEATING SOLUTIONS DE L AIR Comfort Module 5-2 kw Choose the easy heating solution! Comfort Module: heating with Carrier system innovation Proper control of heat pumps is key to

More information

your comfort. our world. Altherma Flex Type Renewable heat pump system for every environment

your comfort. our world. Altherma Flex Type Renewable heat pump system for every environment your comfort. our world. Altherma Flex Type Renewable heat pump system for every environment Outdoor One or more indoor or outdoor units Indoor 1 Domestic hot water 2 Heating 3 Cooling Daikin Altherma

More information

pyxis hp "u" pyxis hp "u" IDEA NEW rcgroupairconditioning

pyxis hp u pyxis hp u IDEA NEW rcgroupairconditioning Comfort PYXIS HP U : ir / water reversible heat pumps for outdoor installation, equipped with scroll compressors and axial fans Cooling Capacity: 42,3 195,0 Heating Capacity: 47,1 222,0 NEW IDE R410 rcgroupairconditioning

More information

30AW. Reversible Air to Water Heat Pump PRODUCT SELECTION DATA. Monobloc inverter. Compact, reliable and efficient. More than a Heat Pump

30AW. Reversible Air to Water Heat Pump PRODUCT SELECTION DATA. Monobloc inverter. Compact, reliable and efficient. More than a Heat Pump PRODUCT SELECTION DATA Monobloc inverter Compact, reliable and efficient More than a Heat Pump Reversible Air to Water Heat Pump 0AW CARRIER participates in the ECP programme for LCP/HP Check ongoing validity

More information

RMA AIR-WATER CHILLERS AND HEAT PUMPS FOR OUTDOOR INSTALLATION INSTALLATION AND OPERATION MANUAL

RMA AIR-WATER CHILLERS AND HEAT PUMPS FOR OUTDOOR INSTALLATION INSTALLATION AND OPERATION MANUAL RMA ECO-FRIENDLY REFRIGERANT GAS AIR-WATER CHILLERS AND HEAT PUMPS FOR OUTDOOR INSTALLATION INSTALLATION AND OPERATION MANUAL Dear Customer, Thank you for having purchased a FERROLI product. It is the

More information

Why Vaillant? Home Heating Guide. Because they can reduce our heating bills and our carbon footprint

Why Vaillant? Home Heating Guide. Because they can reduce our heating bills and our carbon footprint Home Heating Guide Why Vaillant? Because they can reduce our heating bills and our carbon footprint Because we re here to help If you have any questions, please call 01634 292300. We can also give you

More information

AIR COOLED ROOFTOP UNITS, COOLING CAPACITY FROM 50 TO 240 kw, AIRFLOW FROM TO m3/h

AIR COOLED ROOFTOP UNITS, COOLING CAPACITY FROM 50 TO 240 kw, AIRFLOW FROM TO m3/h COMFORT ROOFTOP UNITS AIR COOLED ROOFTOP UNITS, COOLING CAPACITY FROM 50 TO 240 kw, AIRFLOW FROM 10000 TO 45000 m3/h climaveneta.com COMFORT ROOFTOP UNITS ENGINEERED FOR MAXIMUM EFFICIENCY AND VERSATILITY

More information

SLS 1202 to With or without total heat recovery. u Air Cooled Screw Chillers. 262 to 916 kw. Engineering Data Manual

SLS 1202 to With or without total heat recovery. u Air Cooled Screw Chillers. 262 to 916 kw. Engineering Data Manual u Air Cooled Screw Chillers SLS 1202 to 4004 With or without total heat recovery 262 to 916 kw Engineering Data Manual EDM SLS407-A.4GB Date : December 2008 Supersedes : TM SLS407-A.3GB/11.06 Specifications

More information

Aquaflair TRAC-TRAF-TRAH

Aquaflair TRAC-TRAF-TRAH Aquaflair TRAC-TRAF-TRAH 110 400 kw Air-cooled chillers, free-cooling chillers and heat pumps for mission critical applications Air-cooled chillers, free-cooling chillers and heat pumps with scroll compressors

More information

Advance Split

Advance Split Engineering Data Manual Aqu@Scop Advance Split Air-to-Water DC Inverter Split Heat Pumps Models 005, 008, 012 & 014 2 to 16 kw Strength Points Most efficient heating technology with variable speed compressor.

More information

RAS Kp AIR COOLED CHILLERS WITH RECIPROCATING COMPRESSORS AND AXIAL FANS REFRIGERANT R290 LIQUID CHILLERS - AIR COOLED AIR

RAS Kp AIR COOLED CHILLERS WITH RECIPROCATING COMPRESSORS AND AXIAL FANS REFRIGERANT R290 LIQUID CHILLERS - AIR COOLED AIR AIR COOLED CHILLERS WITH RECIPROCATING COMPRESSORS AND AXIAL FANS REFRIGERANT R290 46 Above picture is only indicative and is not binding AIR FC The packaged air cooled chillers of RAS Kp series are suitable

More information

MPI DC 8-29 kw. Outdoor monobloc unit with BLDC compressor. Air chillers and heat pumps MPI DC PLUS

MPI DC 8-29 kw. Outdoor monobloc unit with BLDC compressor. Air chillers and heat pumps MPI DC PLUS Air chillers and heat pumps MPI DC Outdoor monobloc unit with BLDC compressor MPI DC - 9 kw Large operating range and energy efficiency under every condition BLDC scroll compressor PLUS BLDC rotary compressor

More information

F series close control air conditioners exploit the indirect FREE COOLING system with adiabatic cooling to ensure high system energy savings.

F series close control air conditioners exploit the indirect FREE COOLING system with adiabatic cooling to ensure high system energy savings. F series close control conditioners exploit the indirect FREE COOLING system with adiabatic cooling to ensure high system energy savings. 38 The F series units are the ideal solution to cool in systems

More information

30RQV NEW. Nominal cooling capacity kw Nominal heating capacity kw AIR-TO-WATER HEAT PUMPS HEATING. Easy and fast installation

30RQV NEW. Nominal cooling capacity kw Nominal heating capacity kw AIR-TO-WATER HEAT PUMPS HEATING. Easy and fast installation AIR-TO-WATER HEAT PUMPS 30RQV 017-021 NEW Nominal cooling capacity 15-18 kw Nominal heating capacity 17-21 kw greenspeed Easy and fast installation Hydronic module available Inverter technology compressor

More information

ELFOEnergy SHEEN. Technical Bulletin. Air source inverter heat pump for outdoor installation. WSAN-XSi RANGE HIGH SEASONAL EFFICIENCY

ELFOEnergy SHEEN. Technical Bulletin. Air source inverter heat pump for outdoor installation. WSAN-XSi RANGE HIGH SEASONAL EFFICIENCY Technical Bulletin BT17I022GB-00 ELFOEnergy SHEEN Air source inverter heat pump for outdoor installation WSAN-XSi 10.1 22.2 RANGE Nominal heating capacity (A7/W45) from 23,3 to 61 kw Nominal cooling capacity

More information

CHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 21 to 39 kw

CHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 21 to 39 kw TECHNICAL INSTRUCTIONS CHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 21 to 39 kw CHGV 22 CHGV 2 CHGV 32 CHGV 40 PHRV heat pump model also available September 2007 10 12 11 - GB - 02

More information

CHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 47 to 78 kw

CHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 47 to 78 kw TECHNICAL INSTRUCTIONS CHGV AIR COOLED WATER CHILLER WITH HYDRAULIC EQUIPMENT AIR / WATER 47 to 78 kw CHGV 50 CHGV 64 CHGV 72 CHGV 80 PHRV heat pump model also available November 2007 10 12 167 - GB -

More information

NECS-N. Climaveneta Technical Bulletin. Reversible unit, air source for outdoor installation. 0202T T kw

NECS-N. Climaveneta Technical Bulletin. Reversible unit, air source for outdoor installation. 0202T T kw Climaveneta Technical Bulletin NECS_N_0202T_0612T_201007_GB r HFC R-410A 0202T - 0612T 53-159 kw Reversible unit, air source for outdoor installation (The photo of the unit is indicative and may change

More information

WATER COOLED HEAT PUMP VERTICAL UNIT CONSOLE TYPE OR RECESSED

WATER COOLED HEAT PUMP VERTICAL UNIT CONSOLE TYPE OR RECESSED EQV R-407C WATER COOLED HEAT PUMP VERTICAL UNIT CONSOLE TYPE OR RECESSED Size Cooling Heating [kw] [kw] 5 1,9 2,2 7 2,4 2,5 9 2,6 2,5 15 3,3 3,2 17 3,7 3,7 REPLACE: BT02E008GB-01 The Versatemp EQV units

More information

Technical description. Atec.

Technical description. Atec. www.thermia.com Thermia Värmepumpar is not liable or bound by warranty if these instructions are not adhered to during installation or service. The English language is used for the original instructions.

More information

OMNIA RADIANT FAN COIL WITH RADIANT HEATING PANEL THE FAN COIL FEATURING 3 HEATING MODES

OMNIA RADIANT FAN COIL WITH RADIANT HEATING PANEL THE FAN COIL FEATURING 3 HEATING MODES OMNIA RADIANT FAN COIL WITH RADIANT HEATING PANEL THE FAN COIL FEATURING 3 HEATING MODES Floor & ceiling installation On/off & inverter versions, applicable with VMF management system OMNIA RADIANT AND

More information

Packaged air cooled liquid chillers for outdoor installation kw. technicalcatalogue T_EGL_1012_GB

Packaged air cooled liquid chillers for outdoor installation kw. technicalcatalogue T_EGL_1012_GB Packaged air cooled liquid chillers for outdoor installation 42 574 kw technicalcatalogue T_EGL_1012_GB INDEX EUROVENT CERTIFICATION... 3 GENERAL CHARACTERISTICS... 3 SERIES IDENTIFICATION... 3 MODEL IDENTIFICATION...

More information

BLUEWAY DC INVERTER AIR TO WATER HEAT PUMP

BLUEWAY DC INVERTER AIR TO WATER HEAT PUMP BLUEWAY DC INVERTER AIR TO WATER HEAT PUMP 1 Enjoy comfortable life with BLUEWAY DC Inverter Air to Water Heat Pump is an innovative system of house heating, domestic hot water and even space cooling,

More information

Efficient heating that won t cost the earth

Efficient heating that won t cost the earth Product Range Guide Efficient heating that won t cost the earth CTC is an international manufacturer of innovative renewable heating solutions. For over 90 years our ranges of high performance products

More information