Which reflector is the right one for your growing situation?

Size: px

Start display at page:

Download "Which reflector is the right one for your growing situation?"

Aleesha Randall
6 years ago
Views:

1 Which reflector is the right one for your growing situation? RAPTOR, DAYSTAR & RADIANT VS OTHER BRANDS Our premium Raptor, Daystar, and Radiant series feature full, four-sided specular aluminum to deliver maximum light to your plants Engineered interior shape allows bright, uniform light distribution without diffusers Ultra premium reflective materials, 99.85% pure with 95% reflectivity, best on the market Unique and patented built-in double-wall cooling runs cooler than all others High temperature premium powder-coated surface will last a lifetime of use Top-of-the-line pre-galvanized steel housing prevents corrosion Sealed air-cooled units have exclusive easy access with captive hardware; high density, high temperature, fully sealing foam allows efficient air cooling Two-sided specular with flat white ends loses up to 25% of light Poor interior makes hot spots, wastes light, needs texture and add-ons to compensate Inferior reflective aluminum typically 75-85% Single-wall construction is hot to the touch and not efficient for air cooling Many knockoffs have inferior wet paint which fades and oxidizes Cheaper cold-rolled steel housings will rust and weaken over time Old slide-in lens and weak foam designs do not seal for air cooling Fully lined with 95% reflective, 99.85% pure specular aluminum best reflective in the world High intensity for compact spaces The Daystar offers nearly 90% efficiency delivered in a broad and uniform pattern. Daystar reflectors are directly based on our top performing GLX, the best 1000 watt reflector in commercial greenhouses today. Recommended for: High intensity/low clearance or broad spread/medium high light intensity at higher mounting clearances. Big, broad, even light spread The Raptor is our largest reflector series, offering big, broad, bright light coverage over the entire plant canopy at 90% efficiency. It's engineered to drive light directly down to your plants on both sides not outside the growing area. Recommended for: Maximum light delivery in lowclearance locations. Wide, even light spread allows close placement to plant canopy, and it's fully gasketed and sealed for effective heat isolation and cooling. Deep, concentrated light penetration The Radiant Series also puts out nearly 90% efficiency in the most powerful and even, deep light penetration pattern in its class. It's the ultimate in concentrated growing power! Recommended for: Ideal for closely spaced arrays to deliver sun-like light intensities that will make your plants jump out of their planters. hydrofarm.com 15

2 TM The biggest and best drives the light directly down to your plants. SIZE: 13"H x 33"W x 43"L Easy access hinges RP8AC 5 Hinged lens for easy access Safety catch keeps lens secure 15' pre-wired lamp cord included Aerodynamic built-in 5KV socket Size matters! Hydrofarm's Raptor mega reflectors were designed with your needs in mind. You wanted bigger, broader, brighter light coverage... our engineers designed it. Maximum air cooling with built-in flanges. Comes complete with cord set, hinged frame, tempered glass, and wire hangers. Exclusive engineered design BRIGHT Full four-sided specular 95% reflective German Hammertone interior Broad light spread allows close placement to plants for maximum light delivery in low-clearance locations LIGHT DIRECTED TO PLANTS on both sides, not outside the growing area Add a raptor 8 heat shield! (See PG 25) RP8AC and RP6AC only 16 hydrofarm.com

TM Not only is it big, but unlike many other large reflectors, the Raptor is built right to deliver performance.

interior BEST IN CLASS Engineered design delivers optimum light efficiency SsTRONGER & MORE DURABLE Multi-point reinforced pre-galvanized steel

sealed for effective heat isolation and cooling Ccomes with sealed lens, built-in aerodynamic socket, instructions, and hanging hardware TM Run

Comes complete with two 15' cord sets, hinged frame, tempered glass, and wire hangers.

Change mounting positions easily MIX & MATCH SPECTRUMS Sodium and halide, lower wattage/higher wattage BRIGHT Full four-sided highly reflective

3 TM Not only is it big, but unlike many other large reflectors, the Raptor is built right to deliver performance. SIZE: 8½"H x 26¾"W x 37½"L Easy access hinges RP8AC and RP6AC only RP6AC BRIGHT Full four-sided specular 95% reflective German Hammertone interior BEST IN CLASS Engineered design delivers optimum light efficiency SsTRONGER & MORE DURABLE Multi-point reinforced pre-galvanized steel construction and corrosion-proof electro coating Tempered, sealed glass lens Wide, even light distribution to plant canopy Fully gasketed and sealed for effective heat isolation and cooling Ccomes with sealed lens, built-in aerodynamic socket, instructions, and hanging hardware TM Run up to two 1000 watt lamps simultaneously and mix and match HPS and MH lamps for balanced output. Maximum air cooling with built-in 8" flanges. Comes complete with two 15' cord sets, hinged frame, tempered glass, and wire hangers. SIZE: 13"H x 33"W x 43"L 5 raptor SERIES Use one or two bulbs Instructions, hangers, & lighting recommendations included RP8ACD AaDJUSTABLE Change mounting positions easily MIX & MATCH SPECTRUMS Sodium and halide, lower wattage/higher wattage BRIGHT Full four-sided highly reflective specular Hammertone interior BIGGER & BROADER Run up to 2,000 watts in one reflector RP8AC 8" Flange AC Raptor Reflector $ RP6AC 6" Flange AC Raptor Reflector RP8ACD 8" Flange Dual Lamp AC Raptor Reflector $ hydrofarm.com 17

Best downward delivery, brightest light, coolest performance series 6 or 8" flange Easy access hinges RD8AC SIZE: 9 3 8"H

The Radiant's generous reflective cavity is designed to deliver the brightest possible light down to your plants, while

Its heavy duty pre-galvanized steel construction is lined with high purity German aluminum for years of dependable growing

Radiant Reflector SERIES 15' pre-wired lamp cord included COVERAge Recommendations 8' x 8' 5' x 5' 6' x 6' 4' x 4' 4' x 4'

5' 1000W Bulb 400W Bulb Optimal Light Primary Light Supplementary Area coverage varies depending on mounting height

with a high efficiency design built around a premium German specular aluminum interior.

Instructions, hangers & lighting recommendations included RD6AC Radiant AC 6" Air Coolable $189.

95 RDLENSYS Radiant Lens System $39.95 LGCKT2 4" Flange Cooling Kit 21.

4 Best downward delivery, brightest light, coolest performance series 6 or 8" flange Easy access hinges RD8AC SIZE: 9 3 8"H x 21"W x 25"L RD6AC Patented 3-Way Convection Air Cooling (US Pat 6,595,662 B2, D456,938 S) Built-in aerodynamic socket The Radiant's generous reflective cavity is designed to deliver the brightest possible light down to your plants, while its patented double-wall design makes it the coolest running fixture on the market. Its heavy duty pre-galvanized steel construction is lined with high purity German aluminum for years of dependable growing performance. Radiant Reflector SERIES 15' pre-wired lamp cord included COVERAge Recommendations 8' x 8' 5' x 5' 6' x 6' 4' x 4' 4' x 4' 2.5' x 2.5' 1000W Bulb 400W Bulb Optimal Light Primary Light Supplementary Area coverage varies depending on mounting height Completely sealed lens system with safety catch Radiant Air Cooled Reflectors are large sized, aircooled, lensed units with a high efficiency design built around a premium German specular aluminum interior. This means more light from the coolest running design ever offered by Hydrofarm. Instructions, hangers & lighting recommendations included RD6AC Radiant AC 6" Air Coolable $ Reflector Unit w/lens RD8AC Radiant AC 8" Air Coolable Reflector Unit w/lens RDUN Radiant Reflector RDLENSYS Radiant Lens System $39.95 LGCKT2 4" Flange Cooling Kit Hinged lens with latch for convenience Use LGCKT2 to air cool RDUN Multi-faceted computer-designed aluminum interior for maximum efficiency Made from premium German materials, 99.85% pure with 95% reflectivity Hangers and lighting recommendations included Built-in cord set and socket ac version includes 6" or 8" flanges that enable higher air flow for cooler temperatures and more reflectors in-line Tempered hinged glass lens with sealing foam included Ccomes with built-in socket and 15' pre-wired lamp cord 5 SIZE: 9 3 8"H x 21"W x 21"L RDUN 18 hydrofarm.com

Brightest, most uniform ultra-wide delivery The Daystar was designed by the finest reflector engineers in the country, utilizing the purest, most efficient German

Compare the Daystar with other reflectors on the market and find out why our design is the leading choice for 1000W sodiums and halides in the competitive commercial

With the same design and reflective material as our flagship Daystar unit, the "AC" adds built-on 6" flanges for cooling air flow with an optional fan coupling high

This combination lets you control growing area temperatures, so you can place lighting closer to plants for better growth and higher yields.

5 Brightest, most uniform ultra-wide delivery The Daystar was designed by the finest reflector engineers in the country, utilizing the purest, most efficient German aluminum to create an unsurpassed combination of uniformity and efficiency. Compare the Daystar with other reflectors on the market and find out why our design is the leading choice for 1000W sodiums and halides in the competitive commercial greenhouse. With the same design and reflective material as our flagship Daystar unit, the "AC" adds built-on 6" flanges for cooling air flow with an optional fan coupling high performance with maximum air cooling potential. The tunnel-like interior ensures more complete air flow than common air-cooled units. This combination lets you control growing area temperatures, so you can place lighting closer to plants for better growth and higher yields. series 15' pre-wired lamp cord included SIZE: Built-in socket 7 3 8"H x "W x "L DA6AC DA6AC comes with completely sealed lens system World s finest German reflective specular aluminum; 99.85% pure with 95% reflectivity Designed exclusively for Hydrofarm by America s foremost lighting design engineers Super efficiency with both 1000W sodium and halide Low profile design for lower clearance areas Patented cool running double-wall design Compact and lightweight; easy to hang Built-in socket and 15' lamp cord Excellent in hotter growing areas Enclosed wire channel protects wiring Fully sealed tempered glass lens, hangers, and lighting recommendations included Cooling allows closer-toplant positioning for best results Patented 3-Way Convection Air Cooling (US Pat 6,595,662 B2) 5 DAUN SIZE: 7 3 8"H x "W x "L Use LGCKT2 to air cool DAUN DaySTar Reflector Instructions, hangers, & lighting recommendations included DA6AC Daystar AC Reflector- $ " Flanges w/lens DAUN Daystar Reflector $ RFLENSYS Daystar Lens System for Daun PLHS5000 Heat Stopper $ LGCKT2 4" Flange Cooling Kit hydrofarm.com 19

series The Xtrasun series offers excellent performance at a cost effective price.

removable lens system for easy bulb exchange 6 and 8" flange XT6AC with sealed lens Use LGCKT2 to

x 21" W x 25" L xtrasun Reflectors XT8AC with easy-access hinged lens XT1AC Xtrasun AC Reflector

95 XTLENSYS Xtrasun Lens System for XT1AC $18.50 LGCKT2 4" Flange Cooling Kit for XT1AC 21.

95 Value 6" AC Reflector This value reflector offers excellent performance at a cost effective

Compatible with all Hydrofarm ballasts, the Value 6" AC reflector features solid construction and

for easy bulb exchange RF6AC SIZE: 8"H x 21"W x 23¾"L Super Large Reflector series Aerodynamic 5kv

6 series The Xtrasun series offers excellent performance at a cost effective price. Solidly built, compatible with all Hydrofarm or Xtrasun ballasts, and priced to fit any budget. Bright & broad light delivery Super air coolable Built-in 6" or 8" flanges Low-profile design Highly reflective specular aluminum Built-in socket and 15' prewired cord set Ccompletely sealed removable lens system for easy bulb exchange 6 and 8" flange XT6AC with sealed lens Use LGCKT2 to air cool XT1AC XT1AC SIZE: XT1AC: 8" H x 21" W x 19 ½" L XT6AC: 8" H x 21" W x 23 ¾" L XT8AC: 9¾" H x 21" W x 25" L xtrasun Reflectors XT8AC with easy-access hinged lens XT1AC Xtrasun AC Reflector $80.95 XT6AC Xtrasun 6" AC Reflector w/lens XT8AC Xtrasun 8" AC Reflector w/lens XTLENSYS Xtrasun Lens System for XT1AC $18.50 LGCKT2 4" Flange Cooling Kit for XT1AC SOLA6 Solar Cooling Kit for XT6AC & RF6AC Value 6" AC Reflector This value reflector offers excellent performance at a cost effective price. Compatible with all Hydrofarm ballasts, the Value 6" AC reflector features solid construction and is priced to fit any budget. Bright & broad light delivery Super air coolable Built-in 6" flanges Low profile design Highly reflective specular aluminum Built-in socket & cord set Ccompletely sealed removable lens system for easy bulb exchange RF6AC SIZE: 8"H x 21"W x 23¾"L Super Large Reflector series Aerodynamic 5kv socket, cord set & adapter included 4-sided hammertone specular 15' power cord Full sealed lens Safety catch lens system for easy cleaning Works with all common ballasts Mega size value! RFB8 VALUE REFLECTORS RF6AC Value 6 Air Cooled Reflector $79.95 RFB8 Super Large Reflector, 8 $ RFB6 Super Large Reflector, SIZE: 11½"H x 29¼"W x 35¼"L RFB6 20 hydrofarm.com

LUMii AC Reflectors For those that need efficient

air-cool fittings for maximum air movement.

Completely sealed, with hinged lens frame Efficient

tempered glass lens, aerodynamic built-in socket, and

LU64AC LU84AC SIZE: 26"H x 21"W x 10¾"L LU64AC Lumii 6"

95 LUMII MAXI REFLECTORS The LUMii Maxi Reflector is a

The reflective surface is made from highly reflective

7 LUMii AC Reflectors For those that need efficient air-cooling, LUMii series AC reflectors have integrated air-cool fittings for maximum air movement. The internal surface is made from a highly reflective imported aluminum. The socket assembly and 15' lamp cord are built into the reflector. It comes complete with a hinged frame, tempered glass and wire hangers. Highly reflective hammertone aluminum interior Completely sealed, with hinged lens frame Efficient integrated flange for 6" or 8" ducting Includes tempered glass lens, aerodynamic built-in socket, and 15' lamp cord 4-sided specular Easy access hinges LU64AC LU84AC SIZE: 26"H x 21"W x 10¾"L LU64AC Lumii 6" AC Reflector $99.95 LU84AC Lumii 8" AC Reflector LUMII MAXI REFLECTORS The LUMii Maxi Reflector is a value priced wing style reflector. The reflective surface is made from highly reflective hammertone aluminum. The socket assembly and 15' lamp cord are built into the reflector. It comes complete with wire hangers. Lightweight Ppre-wired with lamp cord and socket Heavy duty galvanized steel mounting bracket Pre-wired cord Hangers Bulb support Value 6 pack SIZE: 123/8"H x 17¼"W x 20"L LUMX6 Lumii Maxi Reflector $33.33 hydrofarm.com 21

solar cool kit The easy-to-install Sola Cool Solar Powered Fan works with Hydrofarm's XT6AC and RF6AC reflectors, and consists of a

The unit easily mounts inside the reflector, which positions the fan in the center of one of the flanges.

90 CFM fan works with 600W and 1000W lamps Rreduces energy consumption silent operation Easy to install no hardware needed Mounts

fan Zero energy consumption Works with xt6ac/rf6ac (See PG 20) HAMMERHEAD LITE The new Hammerhead Lite features wide light delivery in

Patterned after our Raptor reflector, the Hammerhead Lite is made from highly-reflective hammertone aluminum and is compatible with HID

Includes wing nuts and instructions for easy assembly.

Solar Cooling Kit (for XT6AC and RF6AC) $59.

Lightweight aluminum (40% lighter than steel) for easy hanging Includes 6" flanges and gasketed lens Aaccepts all popular bulb sizes

8 solar cool kit The easy-to-install Sola Cool Solar Powered Fan works with Hydrofarm's XT6AC and RF6AC reflectors, and consists of a solar panel array (56 mini solar panels) and a fan. The unit easily mounts inside the reflector, which positions the fan in the center of one of the flanges. When your bulb turns on, the fan springs to life and propels a cooling breeze through your reflector. 90 CFM fan works with 600W and 1000W lamps Rreduces energy consumption silent operation Easy to install no hardware needed Mounts inside the reflector using 4 magnetic nuts (included) Solar cells are powered by bulb for super energy efficiency Ultra quiet running fan Zero energy consumption Works with xt6ac/rf6ac (See PG 20) HAMMERHEAD LITE The new Hammerhead Lite features wide light delivery in a super lightweight reflector. Patterned after our Raptor reflector, the Hammerhead Lite is made from highly-reflective hammertone aluminum and is compatible with HID lamps and HID ballasts up to 1000W. Comes flat in a compact box, and it's lightweight too only 9 lbs! Includes wing nuts and instructions for easy assembly. Includes built-in socket and 15' cord set Folded and rounded corners Does not accept glass SIZE: 9"H x 29"W x 32"L great value SOLA6 Solar Cooling Kit (for XT6AC and RF6AC) $59.95 XTRASUN Mondo Reflector Super size 23"x 31" for super broad diffused light Includes built-in socket, bulb support, and lamp cord set Lightweight aluminum (40% lighter than steel) for easy hanging Includes 6" flanges and gasketed lens Aaccepts all popular bulb sizes Cord set included Easy to assemble PROHHL Hammerhead Lite $ XTRASUN Aluminum Wing Reflector Value six pack SIZE: 9.25"H x 23"W x 31"L Highly reflective, high-performance specular aluminum Incredible value Super lightweight Lamp holder and lamp cord are pre-installed and ready to use Wide and bright light delivery High-performance reflective aluminum insert Super versatile use with or without ducting XTMD6AC Xtrasun Mondo Reflector $ w/flange & Lens Kit SIZE: 12.5"H x 19.75"W x 6.5"L XT2AW Xtrasun Aluminum Wing $40.95 Reflector XT2AW6 Xtrasun Aluminum Wing Reflector 6-pack hydrofarm.com

Xtrasun 49" Parabolic HV Reflector Xtrasun parabolic HV

delivery Lightweight and easy to assemble Built-in socket and

Position bulb horizontal or vertical The XT49HV comes with

XT49HV: 49"D x 9"H Xtrasun 42" Vertical/HORIZONTAL Reflector

horizontal configuration spreads light broadly and evenly.

45"D x 12"H Xtrasun 45" Vertical Reflector 45" Vertical

distributes light very broadly. Assembles easily.

9 Xtrasun 49" Parabolic HV Reflector Xtrasun parabolic HV reflectors deliver all the light down to the plants, with a wide, even light distribution. Bulb can be used horizontally or vertically for maximum light delivery Lightweight and easy to assemble Built-in socket and 15' cord set Accepts sodium or halide bulbs parabolic series Position bulb horizontal or vertical The XT49HV comes with easy to assemble slide panels! No tools needed. XT49HV: 49"D x 9"H Xtrasun 42" Vertical/HORIZONTAL Reflector 42" Vertical/Horizontal with included mogul and socket assembly. Bright white finish with included diffuse panel for horizontal configuration spreads light broadly and evenly. The XT42HV comes with all hardware for easy assembly of your desired lamp orientation. Easy to assemble XT42HV: 42"D x 16"H Cord set included XT45V: 45"D x 12"H Xtrasun 45" Vertical Reflector 45" Vertical Reflector with slotted housing and 4 piece white reflector distributes light very broadly. Assembles easily. Comes with housing, 4 reflective pieces and hardware. XT49HV Xtrasun 49" Parabolic (Horiz/Vertical) Reflector $ XT42HV 42" Parabolic (Horiz/Vertical) Reflector XT45V 45" Vertical Reflector and Housing Unit hydrofarm.com 23

Dual Max Tube Expander TM doubles the light!

This long, two-bulb design is available in two sizes great for use over flood tables up to 4' x 8'.

Exclusive adjustable socket rings allow for various bulb positions within the tube 6" diameter; 48" or 60" long Ccompatible with all major lamp brands Attach your own cord This item does NOT come

Easy to assemble RFDUCOOL60 RFDUCOOL48 Light up smaller spaces with Max Tube Expander 24! The Max Tube Expander now comes in a 24" model with an adjustible reflector.

Includes 15' lamp cord and mogul socket 6" diameter flanges Compatible with all major lamp brands Borosilicate glass SIZE: CS53506 for Dual Cool Tube RFDUCOOL24 6"D x 33"L RFDUCOOL48 6"D x 48"L

95 RFDUCOOL60 Dual Max Tube Expander 60" 269.95 CS53506 15' 16/3 600V Lock & Seal $16.95 Cord for Dual Max Tube RFDUSAM Socket Assembly 49.95 6 and 8" Cool Tube TM cool, compact & efficient!

10 Dual Max Tube Expander TM doubles the light! Hydrofarm's popular Dual Cool Tube is now the Dual Max Tube Expander featuring an adjustable reflector with side wings that can be independently adjusted to 4 different positions! This long, two-bulb design is available in two sizes great for use over flood tables up to 4' x 8'. At the narrowest setting your light casts a 36" wide footprint and at the widest setting the footprint is 72" wide (... at 16" height from the top of the canopy). Exclusive adjustable socket rings allow for various bulb positions within the tube 6" diameter; 48" or 60" long Ccompatible with all major lamp brands Attach your own cord This item does NOT come prewired and will require (2) CS53506 (sold separately). Two bulbs give more even light and allow for blended spectrum Choose from four different configurations! Easy to assemble RFDUCOOL60 RFDUCOOL48 Light up smaller spaces with Max Tube Expander 24! The Max Tube Expander now comes in a 24" model with an adjustible reflector. The compact 24" unit holds one bulb and features the same quality materials and construction as the 48" and 60" units. Includes 15' lamp cord and mogul socket 6" diameter flanges Compatible with all major lamp brands Borosilicate glass SIZE: CS53506 for Dual Cool Tube RFDUCOOL24 6"D x 33"L RFDUCOOL48 6"D x 48"L RFDUCOOL60 6"D x 60"L Dual Max Tube Expander & Max Tube Expander 24 RFDUCOOL24 RFDUCOOL24 Max Tube Expander 24" $ RFDUCOOL48 Dual Max Tube Expander 48" $ RFDUCOOL60 Dual Max Tube Expander 60" CS ' 16/3 600V Lock & Seal $16.95 Cord for Dual Max Tube RFDUSAM Socket Assembly and 8" Cool Tube TM cool, compact & efficient! The quality construction features a highly reflective specular aluminum interior reflector, for directing light more precisely over a growing area. The securely mounted 5KV mogul socket is completely prewired inside a protective junction box. The multi-point hanging system allows the unit to be hung horizontally or vertically for different growing applications. Now included is the patented Lock and Seal 15' heavy duty lamp cord allowing you to conveniently plug into any Hydrofarm or Xtrasun ballast. 6" or 8" diameter by 20" long accommodates most lamp types up to 1000W Internal and external reflectors included Highest quality specular aluminum 15' 600V cord and mogul socket included; easily attaches to any Hydrofarm ballast The most compact and effective way to get bright light over, or in your growing area Sstreamlined design allows cooling airflow to move unimpeded, keeping growing area temperatures lower and allowing you to position your lamp very close to your plants Ccan hang vertically down into the plant canopy and is ideal for enclosed growth chambers Works with a variety of bulb brands and sizes SIZE: RFCOOL6 6"D x 20"L RFCOOL8 8"D x 20"L Hangs vertically or horizontally! RFCOOL6 Includes cord & exterior wing reflectors COOL TUBE 6 and 8 RFCOOL6 6" Cool Tube $94.95 RFCOOL8 8" Cool Tube hydrofarm.com

FResca Sol plantinum system & Wing Reflector These innovative fixtures remove 93% of the heat from your HPS bulbs by transferring it through water to a designated cooling reservoir.

Order alone or add Fresca Sol Wing for greater light dispersal. Vertical brackets allow for vertical mounting.

hand tested in America Uuse instead of (or in combination with) chiller to lower power consumption Pro Reflector A high performance reflector designed to deliver the brightest light at a budget

SIZE: 7"D x 24"L WEIGHT: 8 LBS FSPL with FSPLW FSPLVB SIZE: 19 3 4"L x 19 1 8"W x 5 3 4"H Built-in cord set FSPL PROLTUN Pro Reflector, Bracket w/hardware $59.

95 heat stopper Blocks radiant (infrared) heat away from your plants with minimal impact on light efficiency, so you can move reflectors closer to plants.

Works with all bulbs & reflectors PLHS5000 Heat Stopper $169.

11 FResca Sol plantinum system & Wing Reflector These innovative fixtures remove 93% of the heat from your HPS bulbs by transferring it through water to a designated cooling reservoir. This lets you place lights closer to the plant canopy, so you can get the same growth with a lower wattage bulb. Saves energy and money! Order alone or add Fresca Sol Wing for greater light dispersal. Vertical brackets allow for vertical mounting. Quality components for long-lasting performance Fits all 6" and 8" air-cooled reflectors Fits 1000, 600 or two 400 watt bulbs Wing nuts for easy assembly and cleaning no tools required Every unit hand tested in America Uuse instead of (or in combination with) chiller to lower power consumption Pro Reflector A high performance reflector designed to deliver the brightest light at a budget price. It accepts virtually all wattages and types of halide or sodium bulbs, including our exclusive Agrosun enhanced halides and sodiums. Patented worldwide: US, Canada, Australia and UK. SIZE: 7"D x 24"L WEIGHT: 8 LBS FSPL with FSPLW FSPLVB SIZE: "L x "W x 5 3 4"H Built-in cord set FSPL PROLTUN Pro Reflector, Bracket w/hardware $59.95 PROLT6PL Pro Reflectors, 6 sets in bulk FSPL Fresca Sol Plantinum System $ FSPLW Fresca Sol Wing Reflector SPO FSPLVB Fresca Sol Vertical Brackets heat stopper Blocks radiant (infrared) heat away from your plants with minimal impact on light efficiency, so you can move reflectors closer to plants. Helps cool Air Cooled (ac) reflectors by re-directing radiant heat into the airstream. Installs easily on all popular Hydrofarm reflectors with no obstruction of airflow. Works with all bulbs & reflectors PLHS5000 Heat Stopper $ Reflector Heat Shield A sturdy, custom-fitted cover that double insulates your existing air-cooled hood against the heat your lights generate for a cooler environment, happier plants and higher energy savings! Heavy duty insulation reduces air flow noise Soft, durable, and machine washable Strong, high quality construction Made in the USA 95% reflective exterior Add heat shield ducting covers (See PG 259) HSXT6 Heat Shield for XT6AC $62.95 HSDA6 Heat Shield for DA6AC HSRD6 Heat Shield for RD6AC HSSS6 Heat Shield for LU64C HSRD8 Heat Shield for RD8AC HSRP8 Heat Shield for RP8AC hydrofarm.com 25

Smallest, best all-in-one grow light system on the market.

Magnetic 150 & 175W Super-quiet operation Easy to hang, lightweight and compact Includes

Super compact! Digital Sunburst Weighs 1 3 less than magnetics!

halide Air cooling options Includes instructions, hangers and lighting recommendations

8"W x 22.5"L SB Silent digital ballast built-in! Add jump start stand!

35"H x 9"W x 19"L Sunburst SERIES accessories Add-on accessories to create an air cooled

Use with Mega Garden for great results! SBM150S Mini Sunburst w/150w HPS Lamp $89.

95 BUSD150MSB Replacement Bulb for SBM150S $18.

95 SBSYST SBLENSYS Lens for Digital & Convertible $16.

95 SBSYST Cooling Fan System for Sunburst 29.95 SBE250 250W Sod/Hal Electronic * $219.

12 Smallest, best all-in-one grow light system on the market. MINI Sunburst This all-in-one magnetic ballast/reflector system keeps it simple, giving you more room to grow. The bright light/cool design gives optimum results in a compact package. Magnetic 150 & 175W Super-quiet operation Easy to hang, lightweight and compact Includes bulb, instructions, hangers and lighting recommendations Includes lamp & built-in ballast Super compact! Digital Sunburst Weighs 1 3 less than magnetics! Digital 250 & 400W Virtually silent operation Automatically converts from sodium to halide Air cooling options Includes instructions, hangers and lighting recommendations SBE * *pro-rated 3+2 SBM175H Highly reflective specular aluminum SIZE: 9.25"H x 14.8"W x 22.5"L SB Silent digital ballast built-in! Add jump start stand! (Stand sold on PG 38) SIZE: 7.35"H x 9"W x 19"L Sunburst SERIES accessories Add-on accessories to create an air cooled system! Order lamps separately see above. SBLENSYS Perfect starter! Use with Mega Garden for great results! SBM150S Mini Sunburst w/150w HPS Lamp $89.95 SBM175H Mini Sunburst w/175w MH Lamp BUSD150MSB Replacement Bulb for SBM150S $18.95 BUHL175MSB Replacement Bulb for SBM175H SBSYST SBLENSYS Lens for Digital & Convertible $16.00 Sunburst Systems SBMLENS Lens for Mini Sunburst (not shown) SBSYST Cooling Fan System for Sunburst SBE W Sod/Hal Electronic * $ SBE W Sod/Hal Electronic* * Order bulbs separately see pp Convertible SUNBURST All the features plus a convenient switch from sodium to halide! Convertible 250 & 400W Air cooling options Includes instructions, hangers and lighting recommendations More vents for extra efficient cooling SIZE: 9"H x 14.5"W x22.5"l Cooling system & lens available (See Sunburst accessories at left) SBC W Sod/Hal Convertible* $ SBC W Sod/Hal Convertible* * Order bulbs separately see pp SBC 26 hydrofarm.com

Fully Flexible Lighting Systems

Fully Flexible Lighting Systems LUMii is a range of quality lighting products for growing plants. The range has been designed by growers, for growers and is packed with unique features to make your life