EVALUATION SUBJECT: DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING PLUMBING FIXTURES.

Size: px
Start display at page:

Download "EVALUATION SUBJECT: DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING PLUMBING FIXTURES."

Transcription

1 ICC-ES Report PMG-1095 Reissued 08/2017 This report is subject to renewal 08/2018 EVALUATION SUBJECT: WATER CLOSET,VITREOUS CHINA WATER CLOSET WITH DUAL FLUSH DEVICE, VITREOUS CHINA LAVATORIES, VITREOUS CHINA URINALS, VITREOUS CHINA DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING PLUMBING FIXTURES Report Holder: MEGABRAND KITCHEN AND BATH INC MARQUARDT AVENUE CERRITOS, CA 90703

2 ICC-ES PMG Certificate PMG-1095 Effective Date: August 2017 This listing is subject to re-examination in one year. (800) (562) A Subsidiary of the International Code Council CSI: DIVISION: PLUMBING Section: Plumbing Fixtures Section: Instrumentation and Control for Plumbing certification system: The ICC-ES product certification system includes testing samples taken from the market or supplier s stock, or a combination of both, to verify compliance with applicable codes and standards. The system also involves factory inspections, and assessment and surveillance of the supplier s quality system : Listee: Water Closet, Vitreous China Water Closet with Dual Flush Device, Vitreous China, Vitreous China Urinals, Vitreous China Megabrand Kitchen and Bath Inc Marquardt Ave. Cerritos, CA Additional listees: Cascadian Marketing, Inc Shannon Ave. Ferndale, WA Compliance with the following codes: 2015, 2012 and 2009 International Plumbing Code (IPC) 2015, 2012 and 2009 International Residential Code (IRC) 2015, 2012 and 2009 Uniform Plumbing Code (UPC)* 2015, 2010 and 2005 National Plumbing Code of Canada ** 2011 Uniform Plumbing Code - India (UPC-1)* *Uniform Plumbing Code is a copyrighted publication of the International Association of Plumbing and Mechanical Officials **National Plumbing Code of Canada is a copyrighted publication of National Research Council Canada Compliance with the following standards: ASME A /CSA B Plumbing Fixtures ASME A Six-Liter Water Closets Equipped with a Dual Flushing Device Listings are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the listing or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this listing, or as to any product covered by the listing. Copyright 2017 ICC Evaluation Service, LLC. All rights reserved. Page 1 of 6

3 PMG-1095 Most Widely Accepted and Trusted Page 2 of 6 Identification: Installation: Each fixture or fixture component (except for pedestal lavatories) must be permanently and legibly marked with the Cascadian Marketing LLC or registered trademark and the date of manufacture. Water closets shall be permanently and visibly marked with the model number and gravity flush tanks shall be permanently marked with a water level mark. Water closets and urinals shall be marked with the water consumption in GPF and LPF. Each fixture must bear the ICC-ES PMG listing mark. The ICC-ES PMG listing number (PMG-1095) is optional. All packaging must be marked with the Cascadian Marketing LLC or registered trademark; or in case of private labeling, the name of the customer for whom the fixture was manufactured. Packaging for water closets and urinals shall be marked with the water consumption in GPF and LPF. Fixtures are to be installed in accordance with the manufacturer's instructions and the applicable code. A water closet, urinal, lavatory or bidet shall not be set closer than 15 inches (381 mm) from its center to any side wall, partition, vanity or other obstruction, or closer than 30 inches (762 mm) center to center between adjacent fixtures. There shall be not less than a 21-inch (533 mm) clearance in front of the water closet, urinal, lavatory or bidet to any wall, fixture or door. Water closet compartments shall be not less than 30 inches (762 mm) in width and not less than 60 inches (1524 mm) in depth for floor- mounted water closets and not less than 30 inches (762 mm) in width and 56 inches (1422 mm) in depth for wall- hung water closets. Model: Megabrand Kitchen and Bath Inc. Megabrand Kitchen and Bath Brand name and Woodbridge Brand name have the same model numbers as following: Water Closets Urinals Pedestal Model No. Model No. Model No. Model No. B01101/W01102 B0501/W0501 V2901 U580 H1801/D1801 B06100/W06100 B0502/W0501 L2902 H1802/D1802 B0710 B0501/W0703 V2905 H1803/D1803 B0701/W0701 B0502/W0703 V21290 H11250/D11106 B01101/W01200 B0601/W0601 V21292 H13280/D13202 B02800/W02800 B0602/W0601 V21390 H12800/D12800 B02806/W02806 B0601/W0704 V21392 H12880/D12880 B04000/W04000 B0602/W0704 V21490 H14080/D14080 B0600 B06101/W06100 V21506 H140601/D14333 B0203/W0201 B0920 V21560 H14000/D14000 B03430/W01102 B0750 V21920 H11930/D11930 B0721/W0701 B0940 V21922 H0801/D0801 B0702/W0701 B0630/W0704 V22010 H0802/D0801 B0703/W0703 B0730/W0703 V22280 H12030/D1230 B0705/W0702 F0101 V23510 B0706/W0761 F0130 V235A0 B0730/W0701 B0201/W0201 V23541 B0204/W0201 B0202/W0201 V23550 B0740/W0701 V23560 B0761/W0761 V23580 B0830/W0801 V24090 B0830/W0881 V00211 B0920/W0901 B0920/W0981 B0930/W0901 B0930/W0981 B0341 B0500

4 PMG-1095 Most Widely Accepted and Trusted Page 3 of 6 B0340 B0910 Additional Listee: CASCADIAN SANITARY WARE Drop-In Pedestal L1290 Victor 20.25" x 17.25" Oval Drop-In Lavatory 4", 8", SH L1292 Ovala 20.3" x 17.1" Oval Drop-In Lavatory 4", 8", SH L1390 Reo 19" Round Drop-In Lavatory 4", 8", SH L1392 Rondo 19.2" Round Drop-In Lavatory 4", 8", SH L1920 Vogue 22.8" x 19.1" Oval Drop-In Lavatory 4", 8", SH L1922 Galaxy 22.8" x 19.0" Oval Drop-In Lavatory 4", 8", SH L4090 Regent II 22.4" x 18.1" Drop-In Lavatory 4", 8", SH L2010 Royal 23.2" x 18.1" Drop-In Lavatory 4", 8", SH L1490 Victorian 16.7" x 13.8" Drop-In Lavatory 4", 8", SH L1250 P1106 Prestige 23.3" x 18.8" x 35.4" Pedestal Lavatory 4", 8", SH L1830 P1830 Lincoln 26.0" x 20.9" x 37.2" Pedestal Lavatory 8" L1930 P1930 Chicago 28.0" x 20.3" x 34.5" Pedestal Lavatory 4", 8", SH L3280 P3202 Nostalgia 31.9" x 21.5" x 39.8" Console Lavatory with Legs 4", 8", SH L3900 P3910 Classical 26.4" x 21.3" x 34.3" Pedestal Lavatory 4", 8", SH L801 P801 Petite II 19.3" x 17.3" x 35.6" Pedestal Lavatory 4", SH L802 P802 Classic II 21.6" x 18.3" x 36.4" Pedestal Lavatory 4", 8", SH L803 P803 Chelsea 23.0" x 18.1" x 35.2" Pedestal Lavatory 4", 8", SH L4000 P4000 Regent II 27.0" x 20.1" x 35.6" Pedestal Lavatory 4", 8", SH L4060 P4333 Regent II 24.8" x 19.9" x 36.4" Corner Pedestal Lavatory 4" L4080 P4080 Regent II 22.4" x 17.5" x 35.7" Mini Pedestal Lavatory 4" 26.4" x 19.6" x 33.7" Square Pedestal L2030 P2030 Royal Lavatory 4", 8", SH L2800 P2800 Victorian 26.0" x 21.1" x 34.0" Pedestal Lavatory 4", 8", SH L2880 P2880 Victorian 21.9" x 18.2" x 34.5" Mini Pedestal Lavatory 4" Under Mount L1506 L1560 Marsala Bristol 20.2" x 14.3" Rectangular Under Mount Lavatory with Installation Clips 19.8" x 16.6" Oval Under Mount Lavatory with Installation Clips Vessel

5 PMG-1095 Most Widely Accepted and Trusted Page 4 of 6 Wall Hung L3510 Alape 18.1" Round Vessel Lavatory No Drill L3541 Tri-Layer 18.1" Round Vessel Lavatory Closed Back SH L3550 Tiffany 16.2" Round Bowl Vessel Lavatory No Drill L3560 Avanti 17.0" Round Vessel Lavatory No Drill L3580 Tango 18.4" x 14.6" Rectangular Vessel Lavatory SH L35AO Torema 20" Square Vessel Lavatory 4", 8", SH L901 Sonrio 18.25" Round In/Out Vessel Lavatory No Drill L902 Modena 17.5" Hexagon Vessel Lavatory No Drill L905 Adria Bucket 16 1/2" Round Vessel Lavatory No Drill L2280 Universal ADA' 20.3" x 18.1" Wall Hung Lavatory 4", 8", SH LT11 Prescott 19.1" x 16.9" Wall Hung Lavatory 4", 8", SH One-Piece Toilets GPF Class C710 Elite Elongated 3 1/4" Flush Valve One Piece Toilet with Deluxe Fittings 1.60 L/C C720 Roma Elongated 3 1/4" Flush Valve One Piece Toilet 1.28 HET C750 Roma II Elongated 3 1/4" Flush Valve One Piece Toilet, Dual Flush 1.55 / 0.95 HET C940 Ramada Comfort Height 16 1/2" Elongated, 3 1/4" Flush Valve One Piece Toilet, Dual Flush 1.55 / 1.05 HET Two-Piece Toilets GPF Class C201 T201 Enviro RF 2 Siphon Jet with 3 Flapper 1.0 HET C202 T201 Enviro EL 2 Siphon Jet with 3 Flapper 1.0 HET C501 T501 Distinction Round Front, 2" Siphon Jet 1.55 L/C C502 T501 Distinction Elongated, 2" Siphon Jet 1.50 L/C C501 T703 Distinction Round Front, 2 Siphon Jet 1.50 L/C C502 T703 Distinction Elongated, 2" Siphon Jet 1.55 L/C C730 T703 Distinction Jet 1.55 L/C C601 T601 Epic Round Front, 2" Siphon Jet with 3 Flapper 1.28 HET C602 T601 Epic Elongated, 2" Siphon Jet with 3 Flapper 1.28 HET C601 T704 Epic Round Front, 2" Siphon Jet with 3 Flapper 1.28 HET C602 T704 Epic Elongated, 2" Siphon Jet with 3 Flapper 1.28 HET C630 T704 Epic Comfort Height 17 1/8" Elongated, 2" Siphon Jet with 3 Flapper 1.28 HET C701 T701 Athena Round Front, 2" Siphon Jet 1.60 L/C C702 T701 Athena Round Front, 2" Siphon Jet, 10" Rough-In 1.60 L/C C703 T701 Athena Round Front, 2" Siphon Jet, 14" Rough-In 1.60 L/C C721 T701 Athena Elongated, 2" Siphon Jet 1.60 L/C Two-Piece Toilets cont. C730 T701 Athena Jet 1.60 L/C C740 T701 Athena 'ADA' 18" Elongated, 2" Siphon Jet 1.60 L/C C705 T702 Econo Round Front, 2" Siphon Jet 1.60 L/C

6 PMG-1095 Most Widely Accepted and Trusted Page 5 of 6 C706 T761 Conserver Round Front, 2" Siphon Jet, 1.28 Gallon 1.28 HET C736 T761 Conserver Jet, 1.21 Gallon 1.28 HET C761 T761 Conserver Elongated, 2" Siphon Jet, 1.28 Gallon 1.28 HET C830 T801 Venezia Jet Toilet with 3" Flapper 1.60 L/C C830 T881 Venezia Jet with 3" Flapper, Dual Flush 1.28 / 1.0 HET C840 T801 Venezia ADA' 18" Elongated, 2" Siphon Jet with 3" Flapper 1.60 L/C C920 T901 Toscano Comfort Height 16 1/2" Round Front, 2 1/8" C920 T981 Toscano Comfort Height 16 1/2" Round Front, 2 1/8" Valve, Dual Flush 1.28 / 1.0 HET C930 T901 Toscano Comfort Height 16 1/2" Elongated, 2 1/8" C930 T981 Toscano Comfort Height 16 1/2" Elongated, 2 1/8" Valve, Dual Flush 1.28 / 1.0 HET C4000 T4000 Regent II Elongated Toilet 1.60 L/C C2800 T2800 Victorian Round Front Toilet with Flat Lid 1.60 L/C C2806 T2806 Victorian Elongated Toilet with Back Splash Lid 1.60 L/C C1101 T1102 Grande Round Front 1.60 L/C C3400 T1102 Grande Comfort Height 16 1/2" Elongated 1.60 L/C C3430 T1102 Grande 'ADA' 18" Elongated 1.60 L/C C1101 T1200 Econo Round Front 1.60 L/C C3400 T2700 Euro Comfort Height 16 1/2" Elongated 1.60 L/C C5000 T5000 Dynamic Power Flush Elongated, 3 1/4" Flush Valve 1.60 L/C C5100 T5100 Dominion Round Front, 3 1/4" Flush Valve 1.60 L/C C6100 T6100 The Champ Elongated 1.60 L/C C6101 T6100 The Champ Round Front 1.60 L/C C2050 T2050 Royal Elongated, 2 Siphon Jet with 3 Flapper 1.28 HET Ready-To-Go Toilets CTR 720 Roma Elongated 3 1/4" Flush Valve One Piece Toilet 1.28 HET CTR 750 Roma II Elongated 3 1/4" Flush Valve One Piece Toilet, Dual Flush 1.55 / 0.95 HET CTR Grande 'ADA' High Boy Ht. 18" Elongated, Siphon Jet 1.60 L/C CTR Enviro RF 2 Siphon Jet with 3 Flapper 1.0 HET CTR Enviro EL 2 Siphon Jet with 3 Flapper 1.0 HET CTR Distinction Round Front, 2" Siphon Jet 1.55 L/C CTR Distinction Elongated, 2" Siphon Jet 1.50 L/C CTR Distinction Round Front, 2" Siphon Jet 1.50 L/C CTR Distinction Elongated, 2" Siphon Jet 1.55 L/C Ready-To-Go Toilets cont. CTR Epic Round Front, 2" Siphon Jet with 3 Flapper 1.28 HET

7 PMG-1095 Most Widely Accepted and Trusted Page 6 of 6 CTR Epic Elongate, 2" Siphon Jet with 3 Flapper 1.28 HET CTR Epic Round Front, 2" Siphon Jet with 3 Flapper 1.28 HET CTR Epic Elongated, 2" Siphon Jet with 3 Flapper 1.28 HET CTR Epic Comfort Height 17 1/8" Elongated, 2" Siphon Jet with 3 Flapper 1.28 HET CTR Athena Round Front, 2" Siphon Jet 1.60 L/C CTR Distinction Jet 1.55 L/C CTR Econo Round Front, 2" Siphon Jet 1.60 L/C CTR Conserver Round Front, 2" Siphon Jet 1.28 HET CTR Athena Elongated, 2" Siphon Jet 1.60 L/C CTR Athena Comfort Height 16½ Elongated, 2" Siphon Jet 1.60 L/C CTR Conserver Comfort Height 16½" Elongated, 2" Siphon Jet, 1.21 Gallon 1.28 HET CTR Athena 'ADA' 18" Elongated, 2" Siphon Jet 1.60 L/C CTR Conserver Elongated, 2" Siphon Jet 1.28 HET CTR Venezia Comfort Height 16½" Elongated, 2" Siphon Jet Toilet with 3" Flapper 1.60 L/C CTR Venezia Comfort Height 16½" Elongated, 2" Siphon Jet with 3" Flapper, Dual Flush 1.24 / 0.92 HET CTR Venezia ADA' 18" Elongated, 2" Siphon Jet with 3" Flapper 1.60 L/C CTR Toscano Comfort Height 16½" Round Front, 2-1/8" CTR CTR CTR Toscano Toscano Toscano Comfort Height 16½" Round Front, 2-1/8" Valve, Dual Flush 1.24 / 0.95 HET Comfort Height 16½" Elongated, 2-1/8" Comfort Height 16 1/2" Elongated, 2 1/8" Valve, Dual Flush 1.24 / 1.03 HET Flush Valve Toilets FB101HE Elongated Flush Valve Toilet 1.28 HET FB130HE Comfort Height 16 3/4 Elongated Flush Valve Toilet 1.28 HET Urinals U101HE Washout Wall Hung Siphon Jet Urinal with ¾ Inlet Spud & 2 Outlet Spud 0.13 HET Conditions of Listing: 1. The Megabrand kitchen and bath Inc. models recognized in this listing must be installed in accordance with the manufacturer s published installation instructions and the applicable code. 2. The Megabrand kitchen and bath Inc. models recognized in this listing are manufactured by under a quality control program with annual surveillance inspections by ICC-ES.

EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS EXTRA HEAVY OR SERVICE

EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS EXTRA HEAVY OR SERVICE ICC-ES Report PMG-1083 Reissued 05/2017 This report is subject to renewal 05/2018 EVALUATION SUBJECT: CAST IRON SOIL PIPE AND FITTINGS EXTRA HEAVY OR SERVICE DIVISION: 22 00 00 PLUMBING SECTION: 22 13

More information

EVALUATION SUBJECT: PLUMBING SUPPLY FITTING

EVALUATION SUBJECT: PLUMBING SUPPLY FITTING ICC-ES Report PMG-1130 Reissued 04/2017 This report is subject to renewal 04/2018 EVALUATION SUBJECT: PLUMBING SUPPLY FITTING DIVISION: 22 00 00 PLUMBING SECTION: 22 40 00 PLUMBING FIXTURES 22 09 00 INSTRUMENTATION

More information

EVALUATION SUBJECT: DIVISION: HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: HYDRONIC PIPING.

EVALUATION SUBJECT: DIVISION: HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: HYDRONIC PIPING. ICC-ES Report Reissued 08/2016 This report is subject to renewal 08/2017 EVALUATION SUBJECT: UNIPIPE PEX-AL-PEX DIVISION: 23 00 00 HEATING, VENTILATING AND AIR CONDITIONING (HVAC) SECTION: 23 21 13 HYDRONIC

More information

EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING.

EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING. ICC-ES Report PMG-1367 Reissued 02/2018 This report is subject to renewal 02/2019 EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 09 00 INSTRUMENTATION AND CONTROL

More information

EVALUATION SUBJECT: FIRE SUPPRESSION RANGE HOOD DIVISION: MECHANICAL SECTION: COMMERCIAL-KITCHEN HOODS.

EVALUATION SUBJECT: FIRE SUPPRESSION RANGE HOOD DIVISION: MECHANICAL SECTION: COMMERCIAL-KITCHEN HOODS. ICC-ES Report PMG-1293 Reissued 12/2016 This report is subject to renewal 12/2017 EVALUATION SUBJECT: FIRE SUPPRESSION RANGE HOOD DIVISION: 23 00 00 MECHANICAL SECTION: 23 38 13 COMMERCIAL-KITCHEN HOODS

More information

EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS

EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS ICC-ES Report PMG-1280 Reissued 10/2016 This report is subject to renewal 10/2017 EVALUATION SUBJECT: PLUMBING SUPPLY FITTINGS DIVISION: 22 00 00 PLUMBING SECTION: 22 40 00 PLUMBING FIXTURES SECTION: 22

More information

EVALUATION SUBJECT: EPA WATERSENSE - PLUMBING SUPPLY FITTING DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING

EVALUATION SUBJECT: EPA WATERSENSE - PLUMBING SUPPLY FITTING DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING ICC-ES Report PMG-1132 Reissued 04/2018 This report is subject to renewal 04/2019 EVALUATION SUBJECT: EPA WATERSENSE - PLUMBING SUPPLY FITTING DIVISION: 22 00 00 PLUMBING SECTION: 22 09 00 INSTRUMENTATION

More information

EVALUATION SUBJECT: FIREPLACES DIVISION: SPECIALTIES SECTION: FIREPLACES AND STOVES. Report Holder:

EVALUATION SUBJECT: FIREPLACES DIVISION: SPECIALTIES SECTION: FIREPLACES AND STOVES. Report Holder: ICC-ES Report PMG-1290 Reissued 02/2017 This report is subject to renewal 02/2018 EVALUATION SUBJECT: FIREPLACES DIVISION: 10 00 00 SPECIALTIES SECTION: 10 30 13 FIREPLACES AND STOVES Report Holder: CF+D

More information

Effective Date: October 2016 Void After: October Product: Air Admittance Valves File No. C-3803

Effective Date: October 2016 Void After: October Product: Air Admittance Valves File No. C-3803 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

EVALUATION SUBJECT: DIVISION: PLUMBING SECTION: FACILITY WATER DISTRIBUTION INSTRUMENTATION AND CONTROL FOR PLUMBING

EVALUATION SUBJECT: DIVISION: PLUMBING SECTION: FACILITY WATER DISTRIBUTION INSTRUMENTATION AND CONTROL FOR PLUMBING ICC-ES Report PMG-1360 Reissued 10/2017 This report is subject to renewal 10/2018 EVALUATION SUBJECT: LOW LEAD - PRESSURE REDUCING VALVE, TEMPERATURE ACTUATED MIXING VALVE, WATER TEMPERATURE LIMITING DEVICE,

More information

EVALUATION SUBJECT: DIVISION: PLUMBING SECTION: FACILITY WATER DISTRIBUTION INSTRUMENTATION AND CONTROL FOR PLUMBING

EVALUATION SUBJECT: DIVISION: PLUMBING SECTION: FACILITY WATER DISTRIBUTION INSTRUMENTATION AND CONTROL FOR PLUMBING ICC-ES Report PMG-1360 Reissued 01/18/2018 This report is subject to renewal 10/2018 EVALUATION SUBJECT: LOW LEAD - PRESSURE REDUCING VALVE, TEMPERATURE ACTUATED MIXING VALVE, WATER TEMPERATURE LIMITING

More information

EVALUATION SUBJECT: LOW LEAD - PLUMBING SUPPLY FITTINGS, FLEXIBLE WATER CONNECTOR

EVALUATION SUBJECT: LOW LEAD - PLUMBING SUPPLY FITTINGS, FLEXIBLE WATER CONNECTOR ICC-ES Report PMG-1368 Reissued 02/2018 This report is subject to renewal 02/2019 EVALUATION SUBJECT: LOW LEAD - PLUMBING SUPPLY FITTINGS, FLEXIBLE WATER CONNECTOR DIVISION: 22 00 00 PLUMBING SECTION:

More information

EVALUATION SUBJECT: DIVISION: PLUMBING SECTION: FACILITY WATER DISTRIBUTION INSTRUMENTATION AND CONTROL FOR PLUMBING

EVALUATION SUBJECT: DIVISION: PLUMBING SECTION: FACILITY WATER DISTRIBUTION INSTRUMENTATION AND CONTROL FOR PLUMBING ICC-ES Report PMG-1360 Reissued 10/2018 This report is subject to renewal 10/2019 EVALUATION SUBJECT: LOW LEAD - PRESSURE REDUCING VALVE, TEMPERATURE ACTUATED MIXING VALVE, WATER TEMPERATURE LIMITING DEVICE,

More information

EVALUATION SUBJECT: EPA WATERSENSE PLUMBING SUPPLY FITTINGS DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING

EVALUATION SUBJECT: EPA WATERSENSE PLUMBING SUPPLY FITTINGS DIVISION: PLUMBING SECTION: INSTRUMENTATION AND CONTROL FOR PLUMBING ICC-E Report PMG-1410 Reissued 11/2017 This report is subject to renewal 11/2018 EVALUATION UBJECT: EPA WATERENE PLUMBING UPPLY FITTING DIVIION: 22 00 00 PLUMBING ECTION: 22 09 00 INTRUMENTATION AND CONTROL

More information

EVALUATION SUBJECT: OUTDOOR DECORATIVE GAS FIRE PIT AND FIREPLACES DIVISION: SPECIALTIES SECTION: FIREPLACE SPECIALTIES

EVALUATION SUBJECT: OUTDOOR DECORATIVE GAS FIRE PIT AND FIREPLACES DIVISION: SPECIALTIES SECTION: FIREPLACE SPECIALTIES ICC-ES Report PMG-1213 Reissued 06/2017 This report is subject to renewal 03/2018 EVALUATION SUBJECT: OUTDOOR DECORATIVE GAS FIRE PIT AND FIREPLACES DIVISION: 10 00 00 SPECIALTIES SECTION: 10 32 00 FIREPLACE

More information

EVALUATION SUBJECT: OUTDOOR DECORATIVE GAS FIRE PIT AND FIREPLACES DIVISION: SPECIALTIES SECTION: FIREPLACE SPECIALTIES

EVALUATION SUBJECT: OUTDOOR DECORATIVE GAS FIRE PIT AND FIREPLACES DIVISION: SPECIALTIES SECTION: FIREPLACE SPECIALTIES ICC-ES Report PMG-1213 Reissued 03/2018 This report is subject to renewal 03/2019 EVALUATION SUBJECT: OUTDOOR DECORATIVE GAS FIRE PIT AND FIREPLACES DIVISION: 10 00 00 SPECIALTIES SECTION: 10 32 00 FIREPLACE

More information

INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS MATERIAL AND PROPERTY STANDARD FOR

INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS MATERIAL AND PROPERTY STANDARD FOR INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS MATERIAL AND PROPERTY STANDARD FOR EARLY-CLOSURE REPLACEMENT FLAPPERS OR EARLY-CLOSURE REPLACEMENT FLAPPER WITH MECHANICAL ASSEMBLIES IAPMO

More information

Effective Date: May Rev. 1/31/2018- Void After: May Product: Plumbing Fixtures (Stainless Steel) File No. 6088

Effective Date: May Rev. 1/31/2018- Void After: May Product: Plumbing Fixtures (Stainless Steel) File No. 6088 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

EVALUATION SUBJECT: GILES RECIRCULATING (VENTLESS) HOODS

EVALUATION SUBJECT: GILES RECIRCULATING (VENTLESS) HOODS ICC-ES Report PMG-1004 Reissued 08/2017 This report is subject to renewal 08/2018 EVALUATION SUBJECT: GILES RECIRCULATING (VENTLESS) HOODS DIVISION: 23 00 00 HEATING, VENTILATING AND AIR CONDITIONING (HVAC)

More information

PRICE BOOK 2018 ICERA USA ST. THOMAS CREATIONS. P. O. Box 4238 Westminster, CA T: F: E:

PRICE BOOK 2018 ICERA USA ST. THOMAS CREATIONS. P. O. Box 4238 Westminster, CA T: F: E: PRICE BOOK 2018 ICERA USA ST. THOMAS CREATIONS P. O. Box 4238 Westminster, CA 92684 T: 855.444.2372 F: 855.447.0344 E: contact@icerausa.com Table of Contents Product Index... 2 General Terms and Conditions

More information

A. Section Joint Sealants: Seal fixtures to walls and floors.

A. Section Joint Sealants: Seal fixtures to walls and floors. SECTION 224000 - PLUMBING FIXTURES PART 1 GENERAL 1.1 SECTION INCLUDES A. Water closets. B. Urinals. C. Lavatories. D. Sinks. E. Service sinks. F. Showers. G. Wash fountains. H. Eye wash fountains. 1.2

More information

DUKE UNIVERSITY CONSTRUCTION STANDARDS

DUKE UNIVERSITY CONSTRUCTION STANDARDS 1 22 40 00 Plumbing Fixtures 1. General A. Definitions 1. Section includes a. Water closets and urinals b. Lavatories, sinks, and service sinks c. Electric water coolers, drinking fountains, d. Showers

More information

The Water Efficiency Company. Vitreous China Fixtures

The Water Efficiency Company. Vitreous China Fixtures The Water Efficiency Company Vitreous China Fixtures A Reputation for Quality, Performance and Sustainability Long before LEED and the sustainability movement emerged, Sloan was developing and producing

More information

Kitchen & Bath Products

Kitchen & Bath Products Kitchen & Bath Products The Contractor Solutions plumbing collection is an outstanding line of plumbing products which are made to meet and exceed expectations. This collection offers a full line of Toilets,

More information

Effective Date: June 2017 Void After: June Product: Plumbing Fixture Fittings File No. 4995

Effective Date: June 2017 Void After: June Product: Plumbing Fixture Fittings File No. 4995 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Wholesalers List Price Book. Effective Date: February 1, Fixtures WEP. Manual Products WLP HEALTHMINDER. Products HM. Genuine MicroPlumb

Wholesalers List Price Book. Effective Date: February 1, Fixtures WEP. Manual Products WLP HEALTHMINDER. Products HM. Genuine MicroPlumb Fixtures WEP Sensor-Activated Optima Systems OLP Manual Products WLP Manual Repair Parts & Kits CLP Electronic Repair Parts & Kits ELP 2015 HEALTHMINDER Products HM Headquarters 10500 Seymour Avenue Franklin

More information

DESIGN STANDARDS SECTION PLUMBING FIXTURES AND EQUIPMENT. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.

DESIGN STANDARDS SECTION PLUMBING FIXTURES AND EQUIPMENT. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type. PART 1 - GENERAL 1.1 Toilet rooms and utility rooms to have floor drains at lowest point. 1.2 Utilize Exposed Flushometers. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.

More information

ASME STANDARDS IN MODEL CODES

ASME STANDARDS IN MODEL CODES STANDARDS IN MODEL CODES ASME Name Model Code With Year of Referenced IPC IRC UPC 2009 NSPC A112.1.2 Air Gaps in Plumbing 2004 2004 2004 2004 A112.1.3 Air Gap Fittings For Use With Plumbing, Appliances

More information

GENERAL PLUMBING REQUIREMENTS

GENERAL PLUMBING REQUIREMENTS 22 00 00 GENERAL PLUMBING REQUIRMENTS i. 00 00 07 Design Professional Design Process Requirements ii. 00 00 08 Design Professional Documentation Requirements and Deliverables iii. 01 81 00 Facility Performance

More information

B. Shop Drawings: Include diagrams for power, signal, and control wiring.

B. Shop Drawings: Include diagrams for power, signal, and control wiring. SECTION 224213.13 - COMMERCIAL WATER CLOSETS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification

More information

SW2014. Washlet A100 FEATURES MODELS COLORS/FINISHES PRODUCT SPECIFICATION CODES/STANDARDS

SW2014. Washlet A100 FEATURES MODELS COLORS/FINISHES PRODUCT SPECIFICATION CODES/STANDARDS SW2014 Washlet A100 FEATURES Gentle Aerated, Warm Water, Dual Action Spray with oscillating feature Adjustable water temperature and volume Docking Station Easy to Install and Clean Convenient arm control

More information

Wholesalers List Price Book. Effective Date: March 4, Fixtures WEP. Faucets, Soap Dispensers. Manual Products WLP. Parts PWT. Genuine MicroPlumb

Wholesalers List Price Book. Effective Date: March 4, Fixtures WEP. Faucets, Soap Dispensers. Manual Products WLP. Parts PWT. Genuine MicroPlumb Fixtures WEP Sensor-Activated Optima Systems OLP Faucets, Soap Dispensers & Sinks OLP Manual Products WLP Manual Repair Parts & Kits CLP Electronic Repair Parts & Kits ELP Headquarters 10500 Seymour Avenue

More information

REPORT HOLDER: SMOKE GUARD, INC. 287 NORTH MAPLE GROVE ROAD BOISE, IDAHO EVALUATION SUBJECT:

REPORT HOLDER: SMOKE GUARD, INC. 287 NORTH MAPLE GROVE ROAD BOISE, IDAHO EVALUATION SUBJECT: 0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1136 Reissued 10/2017 This report is subject to renewal 10/2018. DIVISION: 07 00

More information

Effective Date: October Rev. 5/21/2018- Void After: October Product: Plumbing Fixture Fittings File No. 5840

Effective Date: October Rev. 5/21/2018- Void After: October Product: Plumbing Fixture Fittings File No. 5840 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

HWC NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS.

HWC NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS. ELECTRIC WATER HEATER SCHEDULE DESIGNATION MODEL MANUFACTURER STORAGE RECOVERY TEMPERATURE LEAVING ELECTRICAL CHARACTERISTICS REMARKS/SPECIAL INSTRUCTIONS NUMBER GALLONS RATE RISE WATER K.W. VOLTAGE PHASE

More information

A. All fixtures shall meet the requirements of ANSI A117.1, ANSI Z124.2 and the State of Texas Accessibility Standards (TAS).

A. All fixtures shall meet the requirements of ANSI A117.1, ANSI Z124.2 and the State of Texas Accessibility Standards (TAS). PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

More information

2). Crane Co. 4). Kohler Co. 5). Universal-Rundle Corp. Revised September 29, 2017 Commercial Plumbing Fixtures

2). Crane Co. 4). Kohler Co. 5). Universal-Rundle Corp. Revised September 29, 2017 Commercial Plumbing Fixtures PART 1: GENERAL A. This Section provides design standards for plumbing fixtures and trim. Certification of compliance with specified ANSI, UL, and ASHRAE Standards will be required, as appropriate, for

More information

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: FIRE RETARDANT WOOD TREATMENT REPORT HOLDER:

DIVISION: WOOD, PLASTICS AND COMPOSITES SECTION: FIRE RETARDANT WOOD TREATMENT REPORT HOLDER: 0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 2666 Reissued 02/2018 This report is subject to renewal 02/2019. DIVISION: 06 00

More information

MATERIALS Traps TRAPS. No. IPC IRC Description

MATERIALS Traps TRAPS. No. IPC IRC Description MATERIALS Traps TRAPS MAX " MAX 0" No. IPC IRC Description 00. P0.6 00. P0.6 00. P0. 00. () P0.6 Exc. Vertical distance from fixture to the trap weir can not exceed ". Horizontal distance from the fixture

More information

University of Rochester October 17, 2008 Brooks Landing Business Center

University of Rochester October 17, 2008 Brooks Landing Business Center SECTION 224200 COMMERCIAL PLUMBING FIXTURES PART 1 - GENERAL 1.1 WORK INCLUDED A. Provide all labor, materials, equipment and services to perform operations required for the complete installation and related

More information

LAV FCO WCO NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS.

LAV FCO WCO NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS. ELECTRIC WATER HEATER SCHEDULE DESIGNATION MODEL MANUFACTURER STORAGE RECOVERY TEMPERATURE LEAVING ELECTRICAL CHARACTERISTICS REMARKS/SPECIAL INSTRUCTIONS NUMBER GALLONS RATE RISE WATER K.W. VOLTAGE PHASE

More information

Wholesalers List Price Book. Effective Date: February 5, Fixtures WEP OLP. Faucets & Sinks. Manual Products WLP. Genuine MicroPlumb.

Wholesalers List Price Book. Effective Date: February 5, Fixtures WEP OLP. Faucets & Sinks. Manual Products WLP. Genuine MicroPlumb. Fixtures WEP Sensor-Activated Optima Systems OLP Faucets & Sinks OLP Manual Products WLP Manual Repair Parts & Kits CLP 2017 Electronic Repair Parts & Kits ELP Headquarters 10500 Seymour Avenue Franklin

More information

Effective Date: July 2017 Void After: July Product: Plumbing Fixture Fittings File No. 4472

Effective Date: July 2017 Void After: July Product: Plumbing Fixture Fittings File No. 4472 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

B. Shop Drawings: Include diagrams for power, signal, and control wiring.

B. Shop Drawings: Include diagrams for power, signal, and control wiring. SECTION224213.13 -COMMERCIAL WATERCLOSETS PART 1- GENERAL 1.1 SUMMARY Section Includes: 1. Water closets. 2. Flushometer valves. 3. Toilet seats. 1.2 ACTION SUBMITTALS Product Data: For each type of product.

More information

DESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point.

DESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point. PART 1 - GENERAL 1.01 Toilet rooms and utility rooms to have floor drains at lowest point. 1.02 Utilize Exposed Flushometers. 1.03 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.

More information

GENERAL PLUMBING REQUIREMENTS

GENERAL PLUMBING REQUIREMENTS 22 00 00 GENERAL PLUMBING REQUIRMENTS 1. GENERAL A. Related sections: i. 00 00 07 Design Professional Design Process Requirements ii. 00 00 08 Design Professional Documentation Requirements and Deliverables

More information

Product Bulletin. Washlet C200 SW2043 & SW2044. March 10, 2015 Volume 2015 Issue 03. Sales Conditions

Product Bulletin. Washlet C200 SW2043 & SW2044. March 10, 2015 Volume 2015 Issue 03. Sales Conditions Bulletin Page 2 of 7 TOTO USA Spring 2015 Launch Inside this issue: Washlet C100 Pg. 3 Washlet C200 Pg. 4 Atherton Series Undercounter Lavatory Oberon Series Single-Handle Faucets Pg. 5 Pg. 6 Universal

More information

DOMESTIC WATER PACKAGED BOOSTER PUMPS

DOMESTIC WATER PACKAGED BOOSTER PUMPS DIVISION 22 PLUMBING 22 11 16 DOMESTIC WATER PIPING 22 11 19 DOMESTIC WATER PIPING SPECIALTIES 1. To facilitate landscape and other maintenance operations, exterior hose bibs shall be provided at 150 foot

More information

Plumbing Fixtures CEU 251. Continuing Education from the American Society of Plumbing Engineers. September ASPE.

Plumbing Fixtures CEU 251. Continuing Education from the American Society of Plumbing Engineers. September ASPE. Plumbing Fixtures Continuing Education from the American Society of Plumbing Engineers September 2017 ASPE.ORG/ReadLearnEarn CEU 251 READ, LEARN, EARN Note: In determining your answers to the CE questions,

More information

Wall Hung Closet Series. Floor Mount Closets Series 1 & 3 4 & 5. Vitreous. Fixtures. Repair Parts and Maintenance Guide ST-2000 WALL HUNG SERIES

Wall Hung Closet Series. Floor Mount Closets Series 1 & 3 4 & 5. Vitreous. Fixtures. Repair Parts and Maintenance Guide ST-2000 WALL HUNG SERIES Wall Hung Closet Series & & ST-000 WALL HUNG SERIES. 009 ST-09-A Top Spud. to. gpf (. to.0 Lpf) Universal Wall Hung Closet. 000 ST-00-A HET Rear Spud.8 gpf (.8 Lpf) Wall Hung Closet 00 ST-0-A Rear Spud.

More information

Effective Date: January 2018 Void After: January Product: Plumbing Fixture Fittings File No. 6354

Effective Date: January 2018 Void After: January Product: Plumbing Fixture Fittings File No. 6354 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

1. Division 22 Section "Emergency Plumbing Fixtures." 2. Division 22 Section "Drinking Fountains and Water Coolers."

1. Division 22 Section Emergency Plumbing Fixtures. 2. Division 22 Section Drinking Fountains and Water Coolers. Page 224000-1 SECTION 224000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,

More information

ARCHERTM ORDERING INFORMATION NOTES T01-C INSTALLATION INSTRUCTIONS VITREOUS CHINA ONE-PIECE TOILET K-3639T/K-3639T-C

ARCHERTM ORDERING INFORMATION NOTES T01-C INSTALLATION INSTRUCTIONS VITREOUS CHINA ONE-PIECE TOILET K-3639T/K-3639T-C ARCHER TM INSTALLATION INSTRUCTIONS VITREOUS CHINA ONE-PIECE TOILET K-3639T/K-3639T-C Please read these instructions carefully to familiarize yourself with the required tools, materials, and installation

More information

500H TOILET VESSEL LAVATORY FREESTANDING TUB

500H TOILET VESSEL LAVATORY FREESTANDING TUB 500H TOILET VESSEL LAVATORY FREESTANDING TUB NEOREST 500H NEOREST 500H DUAL FLUSH TOILET MS952CUMG Tornado Flush siphon jet flushing system, ultra high-efficiency (1.0GPF/3.8LPF and 0.8GPF/3.0LPF) CeFiONtect

More information

MS950CG Neorest 500 Elongated Toilet/Bidet

MS950CG Neorest 500 Elongated Toilet/Bidet MS950CG Neorest 500 Elongated Toilet/Bidet FEATURES Cyclone siphon jet flushing system, low consumption (1.2GPF/4.5LPF and 1.6GPF/6.0LPF) SanaGloss ceramic glaze - SanaGloss glaze prevents debris, and

More information

SECTION PLUMBING

SECTION PLUMBING SECTION 22 10 00 PLUMBING PART 1 GENERAL 1.1 WORK INCLUDED A. Furnish all labor, material and equipment necessary for the complete installation of the sanitary sewer system (including soil and vent piping),

More information

Effective Date: not available Void After: Product: Plumbing Fixture Fittings File No. 4079

Effective Date: not available Void After: Product: Plumbing Fixture Fittings File No. 4079 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

DESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point.

DESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point. PART 1 - GENERAL 1.01 Toilet rooms and utility rooms to have floor drains at lowest point. 1.02 Utilize Exposed Flushometers. 1.03 Utilize wall hung toilet room fixtures. Urinals for handicapped may be

More information

SECTION PLUMBING FIXTURES

SECTION PLUMBING FIXTURES CSUEB Pioneer Heights Phase r 15410 Page 1 SECTION 15410 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division

More information

SUBCOURSE EDITION EN US ARMY ENGINEER SCHOOL PLUMBING FIXTURES (PLUMBING IV)

SUBCOURSE EDITION EN US ARMY ENGINEER SCHOOL PLUMBING FIXTURES (PLUMBING IV) SUBCOURSE EDITION EN5113 5 US ARMY ENGINEER SCHOOL PLUMBING FIXTURES (PLUMBING IV) US ARMY PLUMBER MOS 51K SKILL LEVELS 1 AND 2 COURSE PLUMBING FIXTURES (PLUMBING IV) SUBCOURSE NO. EN5113 US Army Engineer

More information

Additions & Alterations to Ascension Parish Library Galvez Prairieville, Louisiana Project No. 1401

Additions & Alterations to Ascension Parish Library Galvez Prairieville, Louisiana Project No. 1401 Henry L. Chauvin, Architect, LLC 9429 Highway 941 Gonzales, Louisiana 70737 (225) 612-0707 Fax: (224) 612-4565 Email: henry.chauvin@outlook.com Additions & Alterations to Ascension Parish Library Galvez

More information

DESIGN AND CONSTRUCTION STANDARDS July 2011

DESIGN AND CONSTRUCTION STANDARDS July 2011 PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design for new construction and renovations.

More information

Union County Vocational - Technical Schools Scotch Plains, New Jersey

Union County Vocational - Technical Schools Scotch Plains, New Jersey SECTION 22 40 00 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Faucets for lavatories, bathtubs, bathtub/showers, showers and sinks. 2. Flushometers. 3. Toilet

More information

Bathroom remodeling Dictionary

Bathroom remodeling Dictionary Bathroom remodeling Dictionary Anti Scald Pressure balance Valve Allows water temperature to stay constant even with changes in the water pressure. Backsplash Vertical extension to a counter which will

More information

Willoughby Industries - Security Products

Willoughby Industries - Security Products TOILET WASTE LOCATION (ETW)- WALL OUTLET, BLOWOUT (ETF)- FLOOR OUTLET, SIPHON JET (ETWS)- WALL OUTLET, SIPHON JET FIXTURE MOUNTING (FM)- FLOOR MOUNTED (OF)- OFF FLOOR MOUNTED (OW)- OFF WALL MOUNTED INLET

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS Fitzgerald 1.28 gpf / 4.8 Lpf 2-Piece Toilet Elongated with Seat - Model# D2205CA101 Round Front with Seat - Model# D2205DA101 Thank you for selecting. To ensure this product

More information

Mechanical Inspection Plumbing

Mechanical Inspection Plumbing 0811 Fixtures Sinks, drinking fountains, water closets, showers, etc. Classroom Sinks. Classroom sinks (19) are enameled cast iron self rimming side ledge with gooseneck faucet trim with index handles,

More information

Plumbing Fixtures CEU 216. Continuing Education from the American Society of Plumbing Engineers. October ASPE.

Plumbing Fixtures CEU 216. Continuing Education from the American Society of Plumbing Engineers. October ASPE. Plumbing Fixtures Continuing Education from the American Society of Plumbing Engineers October 2014 ASPE.ORG/ReadLearnEarn CEU 216 READ, LEARN, EARN Note: In determining your answers to the CE questions,

More information

2015 Ferguson Enterprises, Inc. Effective Date: February 1, 2015 PL MIR-PRICE

2015 Ferguson Enterprises, Inc. Effective Date: February 1, 2015 PL MIR-PRICE US PRICE BOOK 2015 Ferguson Enterprises, Inc. Effective Date: February 1, 2015 PL MIR-PRICE 0215 24137 These prices supersede previous price lists and are subject to change without notice. WHAT'S NEW PENDLETON

More information

Systems and Fixtures

Systems and Fixtures Systems and Fixtures PSD 182 Continuing Education from Plumbing Systems & Design NOVEMBER 2011 PSDMAGAZINE.ORG CONTINUING EDUCATION The American Society of Plumbing Engineers defi nes plumbing systems

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS St. George / Wyatt / Seagram One-Piece Toilets St. George 1.28 gpf / 4.8 Lpf - Model# D22000C101 Wyatt 1.28 gpf / 4.8 Lpf - Model# D22005C101 Seagram 1.28 gpf / 4.8 Lpf - Model#

More information

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS INSTALLATION INSTRUCTIONS ARCHIVE 1.6 gpf/6 Lpf One-Piece Toilet Model 97920-60 ARCHIVE 1.28 gpf/4.8 Lpf One-Piece Toilet Model 97920-28 CHAPEAU 1.6 gpf / 6 Lpf One-Piece Toilet Model 97820-60 CHAPEAU

More information

A. General: comply with appropriate standards. 1. International Association of Plumbing and Mechanical Officials: IAPMO. 2. California State AB 1953.

A. General: comply with appropriate standards. 1. International Association of Plumbing and Mechanical Officials: IAPMO. 2. California State AB 1953. SECTION 22 40 00 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Water closets. 2. Urinals. 3. Lavatories. 4. Sinks. 5. Service sinks. 6. Electric water coolers. 7. Wash fountains.

More information

Trade of Plumbing. Module 2: Domestic Hot and Cold Water Service Unit 11: Sanitary Appliances Phase 2

Trade of Plumbing. Module 2: Domestic Hot and Cold Water Service Unit 11: Sanitary Appliances Phase 2 Trade of Plumbing Module 2: Domestic Hot and Cold Water Service Unit 11: Sanitary Appliances Phase 2 Table of Contents List of Figures... 4 List of Tables... 5 Document Release History... 6 Module 2 Domestic

More information

Sanitary Drainage Systems

Sanitary Drainage Systems 11.1 MATERIALS See Section 3.1. Sanitary Drainage Systems 11.2 BUILDING SEWERS AND BUILDING DRAINS 11.2.1 Sewer or Drain in Filled Ground Chapter 11 Building sewers or building drains that are installed

More information

Effective Date: July Rev. 1/26/2018- Void After: July Product: Plumbing Fixture Fittings File No. 3474

Effective Date: July Rev. 1/26/2018- Void After: July Product: Plumbing Fixture Fittings File No. 3474 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

RECREATIONAL VEHICLE PLUMBING COMPONENTS PROGRAM

RECREATIONAL VEHICLE PLUMBING COMPONENTS PROGRAM RECREATIONAL VEHICLE PLUMBING COMPONENTS PROGRAM Customer: Ameri-Kart Corp. Class: Potable Water Holding Tanks, Waste Holding Tanks, Shower Pans, Bathtubs, Sinks Location: Cassopolis, Michigan Bristol,

More information

SECTION PLUMBING FIXTURES AND TRIM. A. Types of plumbing fixtures required for the project include the following:

SECTION PLUMBING FIXTURES AND TRIM. A. Types of plumbing fixtures required for the project include the following: SECTION 15440 PART I - GENERAL 1.01 WORK INCLUDED A. Types of plumbing fixtures required for the project include the following: 1. Water Closets 2. Urinals 3. Lavatories 4. Mop Sink 5. Sinks 6. Electric

More information

Moen Commercial Products Eco-Performance Product Guide

Moen Commercial Products Eco-Performance Product Guide Moen Commercial Products Eco-Performance Product Guide Learn how the use of MOEN Commercial Products What is LEED? The Leadership in Energy and Environmental Design (LEED) Green Building Rating System

More information

Plumbing Guidelines 2012 IBC/ANSI A

Plumbing Guidelines 2012 IBC/ANSI A Plumbing Guidelines 2012 IBC/ANSI A117.1-2009 This document provides basic and fundamental information for accessible plumbing fixtures, toilet rooms and bathing facilities. It is not intended to replace

More information

PLUMBING FIXTURES CHAPTER 27

PLUMBING FIXTURES CHAPTER 27 CHAPTER 27 PLUMBING FIXTURES SECTION P2701 FIXTURES, FAUCETS AND FIXTURE FITTINGS P2701.1 Quality of fixtures. Plumbing fixtures, faucets and fixture fittings shall be constructed of approved materials,

More information

DXV 2016 Bathroom Images and Captions

DXV 2016 Bathroom Images and Captions DXV 2016 Bathroom Images and Captions DXV by American Standard has transformed faucet design and engineering with the production of the first residential faucets created with 3D printing. While this manufacturing

More information

The world has changed. Pretty is no longer enough. Standard is no longer enough. The world wants more. I want more.

The world has changed. Pretty is no longer enough. Standard is no longer enough. The world wants more. I want more. Commercial Products The world has changed. Pretty is no longer enough. Standard is no longer enough. The world wants more. I want more. PERFORMANCE WITH PURPOSE. D E S I G N W I T H A C O N S C I E N

More information

LC500. Patient Care Unit, 29", Fixed Water Closet. Specifi cations Standard Equipment

LC500. Patient Care Unit, 29, Fixed Water Closet. Specifi cations Standard Equipment Combination Lavatory Water Closet Module Durable Epoxy-coated Stainless Steel Cabinetry Large, Conveniently Located s for Easy Installation and Maintenance Specifi cations Standard Equipment Cabinet Stationary

More information

Yale University Design Standards

Yale University Design Standards Change History Date Description of Change Pages / Sections Modified Change Approver Initials 3/26/13 Add text encouraging discussion of innovation in 2 15410, A (Summary) SO newly available products. 3/26/13

More information

Sunset Point Building 2 BRUSHED NICKEL UPGRADE CONTEMPORARY PACKAGE. Christine Mullineaux th St. North Pinellas Park, FL

Sunset Point Building 2 BRUSHED NICKEL UPGRADE CONTEMPORARY PACKAGE. Christine Mullineaux th St. North Pinellas Park, FL Sunset Point Building 2 BRUSHED NICKEL UPGRADE CONTEMPORARY PACKAGE Christine Mullineaux 6600 49th St. North Pinellas Park, FL 33781 727-521-2691 TABLE OF CONTENTS Master Bath 3 Guest Bath 1 6 Guest Bath

More information

3/4.8 AERODYNE 3/4.8L CLASS FIVE+

3/4.8 AERODYNE 3/4.8L CLASS FIVE+ 3/4.8 AERODYNE 3/4.8L CLASS FIVE+ INSTALLATION INSTRUCTIONS VITREOUS CHINA SKIRTED TRAPWAY ONE-PIECE TOILET S-TRAP 305mm K-3869T/K-3869T-S S-TRAP 400mm K-4165T/K-4165T-S Please read these instructions

More information

Karess ORDERING INFORMATION NOTES T01-A INSTALLATION INSTRUCTIONS

Karess ORDERING INFORMATION NOTES T01-A INSTALLATION INSTRUCTIONS Karess INSTALLATION INSTRUCTIONS VITREOUS CHINA TWO-PIECE TOILET S-TRAP 305mm K-5331T-S S-TRAP 400mm K-5471T-S Please read these instructions carefully to familiarize yourself with the required tools,

More information

Plumbing Guidelines 2015 Minnesota Accessibility Code Based on the 2012 IBC and 2009 ANSI A117.1

Plumbing Guidelines 2015 Minnesota Accessibility Code Based on the 2012 IBC and 2009 ANSI A117.1 Plumbing Guidelines 2015 Minnesota Accessibility Code Based on the 2012 IBC and 2009 ANSI A117.1 This document provides basic and fundamental information for accessible plumbing fixtures, toilet rooms

More information

TRUMAN STATE UNIVERSITY PRESIDENT S RESIDENCE RENOVATION

TRUMAN STATE UNIVERSITY PRESIDENT S RESIDENCE RENOVATION SECTION 224100 - RESIDENTIAL PLUMBING FIXTURES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01

More information

SAN RAPHAEL GRANDE ORDERING INFORMATION NOTES T01-B INSTALLATION INSTRUCTIOINS 4.8L SKIRTED CLASS FIVE ONE-PIECE TOILET 4.

SAN RAPHAEL GRANDE ORDERING INFORMATION NOTES T01-B INSTALLATION INSTRUCTIOINS 4.8L SKIRTED CLASS FIVE ONE-PIECE TOILET 4. SAN RAPHAEL GRANDE INSTALLATION INSTRUCTIOINS 4.8L SKIRTED CLASS FIVE ONE-PIECE TOILET 4.8 S-TRAP 305mm K-8688T-S S-TRAP 400mm K-18728T-S Please read these instructions carefully to familiarize yourself

More information

TABLE OF CONTENTS. BARIATRIC SINKS & TOILETS Specially engineered fixtures designed to withstand loads typical in bariatric care environments.

TABLE OF CONTENTS. BARIATRIC SINKS & TOILETS Specially engineered fixtures designed to withstand loads typical in bariatric care environments. OPT DWG DXF RFA SHOWERS Revit PDF files CSI available on our website HEALTHCARE PRODUCT GUIDE PLUMBING FIXTURES & ACCESSORIES MADE IN THE USA 800.428.4065 www.willoughby-ind.com 1 TABLE OF CONTENTS Products

More information

REVE ORDERING INFORMATION NOTES T01-E INSTALLATION INSTRUCTIONS ELONGATED TWO-PIECE TOILET K-17178T-S2/K-17178T-SBG2/K-17178T-SP2

REVE ORDERING INFORMATION NOTES T01-E INSTALLATION INSTRUCTIONS ELONGATED TWO-PIECE TOILET K-17178T-S2/K-17178T-SBG2/K-17178T-SP2 REVE INSTALLATION INSTRUCTIONS ELONGATED TWO-PIECE TOILET K-17178T-S2/K-17178T-SBG2/K-17178T-SP2 Please read these instructions carefully to familiarize yourself with the required tools, materials, and

More information

2012 Virginia Plumbing Code & VRC (Plumbing) Update Training

2012 Virginia Plumbing Code & VRC (Plumbing) Update Training 2012 Virginia Plumbing Code & VRC (Plumbing) Update Training ----------------------------- Henrico County Department of Building Construction and Inspections Introduction This presentation was prepared

More information

Effective Date: October 2018 Void After: October 2019

Effective Date: October 2018 Void After: October 2019 IAPMO Research and Testing, Inc. is a product certification body which tests and inspects samples taken from the supplier's stock or from the market or a combination of both to verify compliance to the

More information

Water Evolution The Best of Design and Technology

Water Evolution The Best of Design and Technology Water Evolution The Best of Design and Technology Experience The Best of Design and Technology Right Here. Water Evolution Inspired by form and simplicity, Acacia Evolution s design exhibits soft, thin

More information

CHAPTER VI BUILDING PLUMBING

CHAPTER VI BUILDING PLUMBING CHAPTER VI BUILDING PLUMBING 6.1. INTRODUCTION The chapter covers questions related to water demand, distribution and drainage. The basic principles for planning and installing common plumbing systems

More information

INSIDE THE TANK. Dual Flush Technology

INSIDE THE TANK. Dual Flush Technology Toilets have been using the same crude mechanics for 200 years. That s why they re prone to breaking, clogging, partial flushes and other nastiness. Worst of all, they waste an obscene amount of water.

More information

JETS VACUUM SANITARY SYSTEMS TOILETS ALWAYS TO BE TRUSTED

JETS VACUUM SANITARY SYSTEMS TOILETS ALWAYS TO BE TRUSTED JETS VACUUM SANITARY SYSTEMS TOILETS ALWAYS TO BE TRUSTED WALL-MOUNTED TOILETS BY JETS JETS CHARM JETS JADE WALL JETS PEARL JETS 59 JETS 609SS JETS OPAL - USPA JETS OPAL - TOTO ELECTRONIC BIDET ELECTRONIC

More information

IPC Plumbing Exam. Name: Carefully read each question and then circle the letter of the best answer.

IPC Plumbing Exam. Name: Carefully read each question and then circle the letter of the best answer. IPC Plumbing Exam Name: Date: Score: Carefully read each question and then circle the letter of the best answer. 1. A vent stack handling 25 dfu s with a developed length of 35 feet shall be inches minimum

More information