Sentinel KalGUARD. Product Facts. Water Treatment Equipment to Manage Hard Water Limescale. Features & Benefits. Overview

Transcription

1 Sentinel KalGUARD Water Treatment Equipment to Manage Hard Water Limescale Features & Benefits Provides whole system protection: Provides protection to water heaters Taps, showers and valves free of lime scale means fewer sites for hidden bacteria Heating systems are free of lime scale, reducing energy bills Safe to be included in drinking water, no need for complex plumbing to divert KalGUARD away from drinking water streams - meaning less complex installation Can be fitted to rising main, which is often smaller bore than the hot water distribution system, with resultant cost savings Metering system controls the operating parameters of the KalGUARD meaning it delivers the right amount of zinc for the intended application: Maximises life expectancy of the KalGUARD anode Provides the correct amount of protection for the intended system Complies with Part L Building Services Compliance Guide. WRAS approved. Overview Sentinel KalGUARD is an electrolytic scale inhibitor package for commercial hot water systems, an independently-proven, lowmaintenance way to protect a property against the damaging and expensive impact of limescale. Where a Sentinel KalGUARD replaces a brine water softener, a return on investment can be delivered usually within 12 months. The system is effective in all mains hard water areas found in the UK. KalGUARD is an environmentally friendly and non-polluting means of permanent water treatment. The anode is designed to be replaced after a 5-8 year service period on continuous dosing applications but can last up to years with intermittent usage. It will protect complete H&C systems by eliminating the formation of limescale encrustation, thereby ensuring continued maximum thermal efficiency and long major equipment life. This will also assist towards compliance with carbon emission regulations. The KalGUARD system does not use any chemicals or salt, nor any temporary electrical or electronic effects. Each system kit consists of the following components: Anode Unit the zinc alloy electrode unit Controller provides low voltage DC output to the anode (< 9 V DC) Flow Meter supplies water flow data to the controller Water filters and a pulse splitter unit are also available as optional accessories to the basic kit (see details below). Page 1 of 5

2 Schematic System Diagram The basic elements of the KalGUARD system are illustrated below (Fig.1). Anode Unit The KalGUARD anode is plumbed directly into the main water supply to the building. It is constructed from a copper body with solid brass fittings and is therefore very robust - a bright plated finish also ensures long lasting protection. The sizing is based on individual site requirements and KalGUARD kits are available in sizes 22, 28, 35, 42, 54, 67, 76 and 108 mm, providing complete coverage. Dimensions, flow rates and other technical data can be found below in the Specification Table. Important Note: The use of delayed action ball valves, or other similar water level control systems, is strongly recommended in order to avoid trickle flow conditions which can potentially compromise the efficacy of a KalGUARD installation. Controllers Mk 1 Mk 2 Alternative controllers are supplied with the KalGUARD system, depending on the anode sizing. The Mk 1 and Mk 2 controllers both have BMS connection capability and the facility to identify / alert regarding any potential faults with the installation. The Mk 2 unit is supplied with the smaller KalGUARDs from 22 through to 54 mm, whilst the original Mk 1 controller is supplied with KalGUARDs 67, 76 and 108 mm. Page 2 of 5

3 The units are both mains powered (240 VAC 50 Hz Single Phase) and designed to be wall mounted near to the KalGUARD system. A special anode connection cable and full instructions are supplied with each unit. Refer to the Specification Table for details of dimensions and other technical data. Water Meter Each KalGUARD kit is supplied with a water flow meter, providing a digital signal designed to regulate the output of the KalGUARD controller. The water flow meters feature a dry dial design and are constructed with brass bodies. Dimensions, flow rates and other technical data can be found below in the Specification Table. Filter Filters are recommended in instances where there is a risk of debris entering the water supply, which is a common problem on new build installations. Manual disc filters are supplied by Sentinel as accessories to the standard KalGUARD kits. The filters are available in a range of sizes to suit the installation. All units are manufactured from robust engineering plastics to ensure that they remain corrosion free. Durable disc filter elements are used across the range - they are easily cleaned and can be immediately reinstalled after cleaning. Dimensions, weights and other technical data can be found below in the Specification Table. KalGUARD Pulse Splitter The KalGUARD Pulse Splitter is an optional accessory to the Sentinel KalGUARD system. It is designed to take an electrical feed from the KalGUARD water meter and split the signal into two separate, isolated outputs. One of the outputs is fed into the KalGUARD controller and the second to supply a separate Building Management System (BMS) in order to monitor water flow rate or water usage. It can be used with any size of KalGUARD anode and either version of controller. The Pulse Splitter can be directly mounted on standard DIN rail. See Specification Table for further details. Page 3 of 5

4 Anode Units Product Code KalGUARD Specification Table Diameter (Main Body) Weight (kg) Flow (l/m) Flow Connection KALG /4" BSP Female 0.15 KALG " BSP Female 0.13 KALG / 4" BSP Female 0.23 KALG / 2" BSP Female 0.26 KALG " BSP Female 0.26 KALG / 2" 8 bolt DIN/ANSI Flange 0.20 KALG " 8 bolt DIN/ANSI Flange 0.23 KALG " 8 bolt DIN/ANSI Flange 0.20 Flow Water Meters KG Size Water Meters (in) mm Width Height Weight (kg) Connections Qmax Qn Qmin (l/h) Max Pres. (bar) 22 3/4" /4" BSP Male " " BSP Male / 4" / 4" BSP Male / 2" / 2" BSP Male " " BSP Male / 2" PN16 Flanges PN16 Flanges PN16 Flanges K Value (litre) Qn Qmax = Qn = Max flow (short period) nominal flow Filters For Width Height Weight (kg) Connection Diam. Average Flow 55u 1" Short 22 mm KG " Super 28 mm KG /2" Super mm KG " Leader 42 & 54 mm KG " Leader 67 mm KG " Leader 76 mm KG " Leader 108 mm KG Flow Page 4 of 5

5 Controllers Version For Width Height Depth Display Power Supply BMS Connectivity IP Rating Mk 1 67, 76, 108 mm KG LCD 240 V AC Fault Alert, Optional Pulse Splitter 65 Mk 2 22, 28, 35, 42 & 54 mm KG OLED 240 V AC Fault Alert, Remote Switching (on/off), Optional Pulse Splitter 65 Page 5 of 5