Manual & Technical Documentation V1.1
|
|
- Clarence Dickerson
- 6 years ago
- Views:
Transcription
1 Manual & Technical Documentation V1.1 tado Smart Thermostat tado Extension Kit ENGLISH
2 Content Product Packages Compatibility Intelligence & Security Functions Smart Thermostat Usage Menu Structure Special States Pairing & Reset Interfaces Correct placement of the Smart Thermostat as a Sensor Extension Box Usage Pairing & Reset Mechanical Design Interfaces Bridge Installation Support Technical Specifications Regulatory Conformity tado Manual & Technical Documentation V1.2 2
3 Product Packages 1 tado Smart Thermostat 2 tado Extension Kit Measures temperature, humidity, noise & luminosity Displays the measured temperature and allows the adjustment of operation and set point Controls heating when wired to the heating system Acts as a sensor and remote control when installed in combination with the Extension Box (depends on the existing heating setup) Required for the replacement of hot water controlling programmers (UK only) Recommended for heating system setups without a room thermostat. The Extension Box acts as a reciever; the Smart Thermostat as a wireless sensor and remote control Controls heating based on sensor data from the tado Smart Thermostat Typically installed next to the boiler or replacing an existing external controller Compatible with the UK standard backplate TADO BRIDGE & ACCESSORIES SMART THERMOSTAT & ACCESSORIES TADO EXTENSION BOX & ACCESSORIES Screws x2 Dowels x2 Insulating Caps x4 Dowels x2 tado Bridge Power Adapter tado Smart Thermostat Lea ve he ating set to al wa ys on! Your tado Smart Thermostat turns the heating on and off. Place this sticker on the control panel of your heating as a reminder. RU-CL-01 tado Extension Box USB Cable Ethernet Cable Screwdriver Sticky Pads x2 Housing Screw NO NC COM A + NL A + Use the stickers to label the cables as specified in the instructions. BU-CL-01 Screws x2 Screw Terminal AAA Batteries x3 Labels Labels 4-Wire Cable Euroblock-2 Plug RAST5-2 Plug tado Manual & Technical Documentation V1.2 1
4 Compatibility Intelligence & Security Compatibility tado is compatible with almost all central heating systems, including: combi, system and heat-only boilers conventional and condensing boilers common Y-, S- and W-plan setups hydronic underfloor systems electric underfloor systems with a maximum switching current of 6 A air source and ground source heat pumps (heating only) zoned systems (one Smart Thermostat per zone) switched live systems potential free (dry contact) systems low voltage systems with analog interfaces low voltage systems with digital bus interfaces tado s compatibility with specific heating systems can be checked at COMPATIBILITY CHECK If tado is bought online the compatibility is checked during the installation process. Model Predictive Control tado does not require presence or absence time programming. Patents have been filed for the algorithms which automatically adjust the heating output to the user s needs. A building model is automatically created for each household which allows tado s proprietary model of predictive control to include weather forecasts in the control strategy and therefore optimize energy usage and comfort at home. Location Based Heating The tado Smart Thermostat controls the temperature automatically depending on the residents location and distance from home and will only heat when it is really needed. Encryption of Communication Any communication between web browsers or smartphones and the tado application servers is encrypted with TLS 1.2 (SSL) Encryption with a 2048-bit Extended Validation Certificate. The communication between the tado Bridge and the tado Application Servers is encrypted with TLS 1.2 (SSL) using 256-bit elliptical curve encryption. The radio communication between the tado devices uses AES-CCM encryption. The key is exchanged by pairing the devices as part of the initial installation procedure. In cases where tado is bought from an installer, they will check the compatibility. tado Manual & Technical Documentation V1.2 2
5 Functions Functions Meaning of Selected Symbols tado has been developed for mobile phone and web use. The settings are most easily controlled using the tado mobile app. It is available for ios (> Version 7.1), Android (> Version 2.3) and Window Phone (> Version 8.1). The app is free. Besides the control of settings and management of data, the tado app also provides a detailed report of the heating history and a feature to compute a savings estimate. The tado web app is accessible on computers and tablets and contains the same features as the mobile app. When a flame is shown, tado is requesting heat from the heating system. This does not necessarily mean that the boiler will start immediately or that a flame is present. Modern boilers apply additional control logic regarding when to switch on or off in response to a heat request. Similiar to a greenhouse, sunshine can significantly increase the inside temperature of a room. Possible solar influence is shown using the sun symbol in the report. Heating Operations There are three different heating operations. Off Auto Off: When set to Off, tado only heats when the room temperature drops below 5 C to avoid frost damage. Auto: When set to Auto, tado controls the heating based on the residents location and schedule. It can be adjusted to the preferred home and sleep temperatures. The optimal away temperature is set by tado automatically depending on the residents location. Manual: When set to Manual, tado keeps the room temperature at the selected set point temperature. Hot Water Operations Manual The hot water functions of tado are not supported by all heating systems. In the application, the hot water functions are displayed only if the heating system supports hot water control. For hot water there are four operations. Off Auto Schedule Manual Off: When set to Off, no hot water is prepared. Auto: When set to Auto, tado prepares hot water according to anticipated need, eg. based on the residents location and statistical data about expected need. Schedule: When set to Schedule, tado prepares hot water according to the settings in the dedicated hot water schedule. It can be set in the web application. Manual: When set to Manual, tado prepares hot water constantly. tado Manual & Technical Documentation V1.2 3
6 Smart Thermostat Smart Thermostat Usage tado Smart Thermostat! The tado Smart Thermostat replaces existing thermostats or acts as a wireless thermostat together with the tado Extension Box for heating systems that didn t have a wired thermostat before. It measures room temperature and allows the user to modify operation and set point temperature. If it is wired to the boiler it directly controls the heating. If it is not wired, it communicates with the boiler via the tado Extension Box. The tado Smart Thermostat is powered by three AAA batteries which are included in the packaging. The paper strip must be removed from the battery case to activate the power supply. Batteries typically last for two years. tado informs the user via and/or push notification when it is time to replace the batteries. Please read the chapter Installation before installing. Usage The tado Smart Thermostat has a user interface which is activated by pressing the button in the bottom right corner. First, the current temperature is displayed. The mechanical button on the bottom right can be used to flip through the menu. The next press switches to the Operation/Mode screen. After pressing the button once more, the setpoint temperature is displayed and can be adjusted using the touch arrow buttons, which light up when settings can be changed. Setting changes are stored after 3 seconds which is indicated by a flashing of the setting. Saving the setting can also be achieved by pushing the mechanical push button. The setting is stored and the UI switches to the next menu point. On heating systems that support hot water preparation, the current hot water state (on/off or temperature on specific systems) and hot water operation are accessible by pressing the mechanical push button again. The activation notifications are shown immediately after pressing the mechanical push button for activating the UI. Mechanical Design Wiring Diagram Battery Case LED matrix display Serial Number & Authentication Code Mechanical push button Touch arrows Terminal Blocks CONTROL ELEMENTS Wall mounted Backplate Back of the Device The mechanical push button activates and moves through the menu The touch arrows switch operation and adjust setpoint temperature tado Manual & Technical Documentation V1.2 4
7 Smart Thermostat Menu Structure HEATING Hot Water (not supported HOT by WATER all heating systems) (not supported by all heating systems) 1. State (1x button push) 2. Operation / Mode (2x button push) 3. Change Settings (3x button push) 4. State (4x button push) 5. Hot Water Operation (5x button push) Auto Operation Shown for relay hot water systems Shown for digital bus hot water systems Home Home Temperature Hot Water Auto Operation Sleep Sleep Temperature Hot Water On Away Not setable Away Temperature Hot Water Current Temperature Hot Water Schedule Operation Current Temperature Preheat (Animation) Manual Operation Home Temperature Hot Water Off Manual Temperature Hot Water Manual Operation (On) Off Auto Operation Presence & absence not visible Hot water Off tado Manual & Technical Documentation V1.2 5
8 Smart Thermostat Special States Activation Notifications The activation notifications are shown immediately after pressing the mechanical button to activate the user interface. FLASH NOTIFICATIONS The states and behaviour are different if an Extension Kit is used. POSSIBLE ERROR STATES SMART THERMOSTAT + EXTENSION KIT Empty battery Update Legionnaires protection Open window Flash once in sequence before the possible error states loop starts No connection to Smart Thermostat has no radio to Bridge Fallback operation The error states display any connection error. POSSIBLE ERROR STATES SMART THERMOSTAT Extension Kit has no radio to Bridge Confirmation required by a press of the button If the installation is not yet finished the wrench icon is displayed. No connection to Smart Thermostat has no radio to Bridge NOT CONFIGURED Confirmation required by a press of the button Not configured tado Manual & Technical Documentation V1.2 6
9 Smart Thermostat Pairing & Reset As part of the installation the Smart Thermostat and the Bridge need to be paired. PAIRING The Smart Thermostat can be reset for troubleshooting. RESET Pressing and holding the button until pairing symbol flashes Releasing the button Pairing for 1 minute Pressing and holding the button until the pairing symbol has appeared and turned off Pairing Symbol Screen turns off Waiting until successfully paired Successfully paired Releasing the button Screen turns off Reboot screen appears after 3 seconds tado Manual & Technical Documentation V1.2 7
10 Smart Thermostat Interfaces Interfaces The tado Smart Thermostat supports both 230V and extra low voltage interfaces. The wiring diagram on the back of the device shows the wiring for the relay operation, three isolated parking slots for excess wiring (from the thermostat which is to be replaced) and three low voltage terminals for analog and bus connection. When replacing a relay thermostat, COM and NO (and NC if present in the current thermostat) should be connected. Any additional wires, such as a neutral wire are placed into the parking slots without labeling next to the relay terminals. They do not have any function other than safely parking excess wires. To replace an analog thermostat, the three extra low voltage terminals on the right hand side are used. The analog output is connected to A, ground (GND) to - and the positive input (Vcc) to +. Correct Placement of the Smart Thermostat as a Sensor In cases where the tado Smart Thermostat does not replace an existing wired thermostat, it can be placed in any appropriate location. When installing the Smart Thermostat the following points should be observed: The Smart Thermostat should be placed in a location which is representative for the temperature which should be set. This is usually the living room The Smart Thermostat should be placed on an inside wall at approx 1.5 m from the ground Areas where the Smart Thermostat is exposed to direct sunlight at any time of the day should be avoided The Smart Thermostat should be placed away from any draft (near a door or window) or heating sources such as radiators or electric devices When replacing a two-wired digital thermostat, the two extra low voltage terminals labeled with - and + are used. Digital bus interfaces are typically protected against polarity reversal, thus the order of connection does not matter. 1,50 m When replacing wireless thermostats, the additional purchase of the tado Extension Kit is recommended. The tado Extension Box replaces an existing external receiver or external controller; or is connected directly to the boiler. The tado Smart Thermostat can then be placed in any suitable location without a wired connection being required. tado Manual & Technical Documentation V1.2 8
11 Extension Box Extension Box Usage tado Extension Box Usage The tado Extension Box acts as a communication between the tado Smart Thermostat and the boiler. It replaces external controllers, external receivers or is directly connected to the boiler. The Extension Box has one mechanical button and one white LED that shines through the front housing. The LED pulses slowly during normal operation. The Extension Box is powered by a 230V mains connection for relays or by a low voltage power supply when connected to analog or digital interfaces. For potential free relay wiring, an additional two wire power supply cable maybe required which is provided by tado upon request. LED Display LED ACTION MEANING! Please read the chapter Installation before installing. Off Bing No Power Connecting Bing (Fast) Pairing Pulsing (Slow) Normal Operation Pairing & Reset During installation the Extension Box needs to be paired with the Bridge. The Extension Box can be set into pairing mode by pressing the mechanical button for around 4-5 seconds (until the LED starts bing fast) and subsequently releasing it. The Extension Box automatically pairs with the Bridge. The LED willl start pulsing slowly when it has contacted our servers (normal operation). The Extension Box can be reset by pressing the mechanical button for more than 8 seconds until the LED turns off. The Extension Box then restarts when the button is released. tado Manual & Technical Documentation V1.2 9
12 Extension Box Mechanical Design Mechanical Design Contact pins Serial number & authentication code Jumper Backplate wiring diagrams 1. Hook the device into the backplate and press it down Back of the Device Terminal blocks Holes for wall mounting Screws to fasten housing 2. Tighten the screws at the bottom to fasten the device Wall Mounted Backplate Mounting tado Manual & Technical Documentation V1.2 10
13 1 2 2 Extension Box Interfaces Interfaces The tado Extension Box has connectors for relays (labeled 1-4) as well as analog and digital interfaces (labeled A, -, +). Two relay wiring configurations are possible and are distinguished by two different jumper positions NLNL A 3 3 Switching the Jumper Position UK Standard Backplate Relay Wiring Diagrams Jumper Position 1: Potential Free Wiring Connection The power supply is separated from the relays. This wiring option is to connect low voltage single relays. In case a UK standard backplate is present some rewiring might be required such that the wires correspond to tado s Relay Wiring 1 as indicated on the back of the Extension Box. Jumper Position 2: Switched Live This wiring option corresponds to a 230V dual relay programmer. In case a UK standard backplate is present and wired as a 230V dual relay (central heating and hot water) the tado Extension Box can simply be mounted on the existing backplate and does not require any rewiring. Analog and Digital Connection To connect an analog thermostat, the analog output is connected to A, ground (GND) to - and the positive input (Vcc) to +. To connect a two-wired digital thermostat, the two extra low voltage terminals labeled with - and + are used. Digital bus interfaces are typically protected against polarity reversal, thus the order of connection does not matter. tado Manual & Technical Documentation V1.2 11
14 Bridge Bridge LED Actions tado Bridge The tado Bridge is the intermediary device between the Smart Thermostat, the Extension Box (if present) and the tado Servers. It is connected to a via an ethernet cable and communicates wirelessly with the Smart Thermostat and the Extension Box. LINK LED ACTION Off Bing (Fast) MEANING No power Pairing Connecting the Bridge ROUTER LED ACTION Off MEANING No ethernet detected USB POWER ADAPTER Connect the ethernet port to the and the USB port to power via the power adapter. USB JACK ON ROUTER Connect the ethernet port to the and the USB port to power via the. Bing On Ethernet detected. Awaiting DHCP IP address assignment IP address assigned successfully INTERNET LED ACTION MEANING Off Off until IP address has been assigned Bing Establishing connection to tado Server On Connection to tado Server has been established INFO: Upon plugging in the Bridge, all three LEDs should light up once. If this doesn t happen, the Bridge is either not sufficiently supplied with power or is defective. tado Manual & Technical Documentation V1.2 12
15 Installation Support tado Installation tado provides installation instructions specific to every heating setup. These instructions are provided via an interactive installation assistant. The documentation at hand is not a replacement for these instructions and is a general documentation of tado devices and features, not of the installation process itself. For online support, please visit: support.tado.com INSTALLATION PROCESS For phone support, please call: UK: +44 (0) DE: +49 (0) Have the tado products at hand Create an account Select the heating system Register devices Self installation with tado installation instructions Professional installer booking WARNING: While self installation of the tado system is possible, tado strongly recommends booking a professional installation through one of our tado installation professionals. tado Manual & Technical Documentation V1.2 13
16 Technical Specifications Regulatory Conformity tado Smart Thermostat (Model RU01) EU Declaration of Conformity Dimensions: circa 104 x 104 x 19 mm (L x W x H) / circa 132 g Operating voltage: 5-36V DC 0.2A / 4.5V DC (3xAAA batteries, 1,200 ma/h) Battery Life (when operating on batteries) : ~ 2 years Relay: max. 240V AC 6(4)A / max. 36V DC 6(4)A Radio: 868 MHz, Mesh (6LoWPAN) Display: 10 x 19 LEDs, 32 x 20 mm Button: 1x Mechanical; 2x Capacitive Touch Material: PC + ABS Colour: white, matte tado Extension Box (Model BU01) Dimensions: circa 102 x 150 x 28 mm (L x W x H) / circa 210 g Operating Voltage: 5-36V DC 0.2A / V AC 0.2A Relay: max. 240V AC 6(4)A / max. 36V DC 6(4)A Radio: 868 MHz, Mesh (6LoWPAN) Display: 1 x LED Buttons: 1 x mechanical Material: PC + ABS Colour: white, matte tado hereby declares that the tado devices are in compliance with the essential requirements and other relevant provisions of the following EU Directives: Low Voltage Directive 2014/35/EU EMC Directive 2004/108/EC R&TTE Directive 1999/5/EC RoHS Directive 2011/65/EU A copy of the EU Declaration of Conformity is available at: tado.com/conformity The WEEE symbol means that the tado devices must be disposed of separately from general household waste. When tado devices reach the end of their lifespan, they must be taken to a designated waste collection point for safe disposal or recycling. tado Bridge (Model GW02) This conserves natural resources, protects human health and helps the environment Dimensions: circa 89 x 52.5 x 25.5 mm (L x W x H) / circa 61 g Operating voltage: 5 V Radio: 868 MHz, Mesh (6LoWPAN) Material: PC + ABS Colour: white, matte tado Manual & Technical Documentation V1.2 14
Smart Thermostat. User Guide
Smart Thermostat User Guide WELCOME 1 GET STARTED Self-installation Professional Installer OR Self-installation Get customised step-by-step instructions for your specific heating system online Professional
United Kingdom. Smart Thermostat 230 V Relay Installations. Guide for Professional Installers
United Kingdom Part 1 of 2 Smart Thermostat 230 V Relay Installations Guide for Professional Installers If you are not a professional installer and want to install tado yourself, get step-by-step instructions
Thermostat install guide
Thermostat install guide 74_Hive Thermostat Install Guide_97mmx97mm_v3.indd 1 23/11/2015 14:0 Install Guide For Hive Active Heating the thermostat, receiver and hub are installed together so heating and
United Kingdom. Smart Thermostat Low Voltage Digital Installations. Guide for Professional Installers
United Kingdom Part 2 of 2 Smart Thermostat Low Voltage Digital Installations Guide for Professional Installers If you are not a professional installer and want to install tado yourself, get step-by-step
Cloudwarm W i- Fi Thermostat Comfort Anywhere Anytime MANUAL
Cloudwarm W i-fi Thermostat Comfort Anywhere Anytime MANUAL Content Content 1.Packing List 2.Compatibility 3.RF Coupling 4.App Setup And Wi-Fi Configuration 5.Room Thermostat (Transmitter) 6.Receiver 7.Technical
Hive Active Heating. Thermostat installation guide
Hive Active Heating Thermostat installation guide Status Hot Central water heating Status Hot Central water heating Here s what you ll need to install Hive Active Heating A working gas central heating
Installation Guide. DEVIreg Smart. Intelligent Electronic Timer Thermostat with Wi-Fi connectivity and App control.
DEVIreg Smart Intelligent Electronic Timer Thermostat with Wi-Fi connectivity and App control www.devi.com Table of Contents 1 Introduction................... 2 2 Technical Specifications............ 4
ENTOUCH ONE USER GUIDE
ENTOUCH ONE USER GUIDE v4.0 MEASURE. MANAGE. SAVE. Contents Getting Started 3 Installation 7 Using the Setup Wizard 11 Using the Home Screen 12 Using the Main Menu 16 The Setup Menu 19 Using the Web Management
User start guide Connected wireless room thermostat Logic Combi C / Vogue Gen 2 Combi Logic Max Combi C / Vogue Max Combi Vogue Combi C / Logic Combi
User start guide Connected wireless room thermostat Logic Combi C / Vogue Gen Combi Logic Max Combi C / Vogue Max Combi Vogue Combi C / Logic Combi Contents Introduction... Ideal Touch kit contents...
Model: RT310i. Smartphone Controlled Thermostat. Installation Manual
Model: RT310i Smartphone Controlled Thermostat Installation Manual Contents Product Compliance... 3 Safety Information... 3 Introduction... 4 Overview... 5 Box contents... 5 Features... 5 Connecting the
SMART THERMOSTAT WITH HOT WATER CONTROL
T6R-HW SMART THERMOSTAT WITH HOT WATER CONTROL PRODUCT SPECIFICATION SHEET FEATURES Attractive, ultra-modern styling makes it ideal for any location in any type of home. Table stand thermostat to fit a
Room Sensor [RBT-3C] Installation Instructions
Room Sensor [RBT-3C] Installation Instructions Room Sensor to replace existing wired room thermostat. Provides programmer / time clock functionality. Requires Network OWL to operate. IN THE BOX: Room Sensor
Heating is great when you control it. USER MANUAL. Wireless Programmable Room Thermostat. Model No.: LS Scan for App
Heating is great when you control it. USER MANUAL Wireless Programmable Room Thermostat Model No.: LS99111010 Scan for App Contents 1. Overview... 01 2. System Installation... 02 2.1 Install and Wiring
Installation manual Anna. In combination with the Smile T230. Manual PW version 2.0
Installation manual Anna. In combination with the Smile T230. Manual PW version 2.0 Hello Anna. Before there were thermostats. Now there is Anna. Anna works for you and does what she is supposed to do:
2-zone application 2X T6R SMART THERMOSTAT & 2-CHANNEL RECEIVER BOX FEATURES APPLICATION MANUAL
2-zone application 2X T6R SMART THERMOSTAT & 2-CHANNEL RECEIVER BOX APPLICATION MANUAL FEATURES With the new 2-channel Receiver box (R6H911RF) and 2x a T6R wireless smart thermostats (T6H700RW) automatic
- Schedule with up to 3 ON periods per day to suit the comfort needs. - Hot water Boost function for temporary override
LYRIC T6R-HW SMART THERMOSTAT PRODUCT SPECIFICATION SHEET The Lyric T6R-HW smart thermostat is designed to provide automatic time and temperature control of heating and stored Hot water systems in homes
Table of Contents. Product Image 1 Locking/Unlocking the neoair 24 Table of Contents 2 Frost Protection 25 What is a Programmable Room Thermostat?
Table of Contents Product Image 1 Locking/Unlocking the neoair 24 Table of Contents 2 Frost Protection 25 What is a Programmable Room Thermostat? 3-4 Power ON/OFF 26 Holiday Programming 27 Installation
Phone: * Website: wiser.draytoncontrols.co.uk /DraytonHome
Wiser Thermostat Kit 1 Wiser Thermostat Kit 2 Wiser Thermostat Kit 3 Wiser Multi-zone Kit 1 Wiser Multi-zone Kit 2 Phone: 0333 6000 622* Website: wiser.draytoncontrols.co.uk E-mail: customer.care@draytoncontrols.co.uk
Installation manual Anna. In combination with the Smile T. Manual PW version 2.0
Installation manual Anna. In combination with the Smile T. Manual PW version 2.0 Hello Anna. Before there were thermostats. Now there is Anna. Anna works for you and does what she is supposed to do: create
4iE Smart WiFi Thermostat Operating Guide
4IE-01-XX-01/4IE-01-XX-02 4iE Smart WiFi Thermostat Operating Guide See reverse for Installation Guide Smartphone control Use your smartphone, tablet or computer to control your heating online Self-adjusting
Operating Instructions Model: PRT-TS WiFi RF. 01/13 Version 1 Ref: PRT-TSWIFI RF
Operating Instructions Model: PRT-TS WiFi RF 01/13 Version 1 Ref: PRT-TSWIFI RF Contents Page Setting up your WiFi Thermostat 2-6 Remote Connection Setup 6-8 Pairing with the Receiver 8-12 Display Symbols
IntelliSync Thermostat / Mobile App Frequently Asked Questions
IntelliSync Thermostat / Mobile App Frequently Asked Questions This FAQ page addresses the most common questions on Deriva IntelliSync. Why bother setting a heating and cooling schedule? What is ENERGY
Contents 1 Set Up 2 Gateway information 3 Operation of the App 4 Troubleshooting Description of sensors. 1 Set Up. 1.1 Connect the Gateway
Contents 1 Set Up 2 Gateway information 3 Operation of the App 4 Troubleshooting Description of sensors 1 Set Up After downloading the Weatherhub app, follow these steps: 1.1 Connect the Gateway Connect
RF Programmable Room Thermostat Installation Instructions
ESRTP4RF RF Programmable Room Thermostat Installation Instructions Thank you for choosing ESi Controls. All our products are tested in the UK so we are confident this product will reach you in perfect
Model: RT310RF. Installation Manual
Model: RT310RF Installation Manual Contents Product Compliance... 3 Safety Information... 3 Box Content... 3 Introduction... 4 Features... 5 Installation... 5 Button functions and keys... 7 Installer mode...
status AW1 WiFi Alarm System Printed in China PA : AW1-UM-EN-V1.0 User Manual 2016 Chuango. All Rights Reserved.
status 2016 Chuango. All Rights Reserved. Printed in China PA : AW1-UM-EN-V1.0 AW1 WiFi Alarm System User Manual Foreword Contents Congratulations on your purchase of the AW1 Alarm system. Before you commence
Lyric T6 & T6R Smart Thermostat
Lyric T6 & T6R Smart Thermostat EN User Guide Lyric T6 Programmable Thermostat Lyric T6R Wireless Programmable Thermostat Lyric T6 & T6R Smart Thermostat Features Connects to the Internet so you can control
SmartLINK Module Ei3000MRF for Mains Powered Multi-Sensor Fire / Smoke / Heat / CO Alarms - Ei3000 Series
SmartLINK Module Ei3000MRF for Mains Powered Multi-Sensor Fire / Smoke / Heat / CO Alarms - Ei3000 Series Instruction Manual Read and retain carefully for as long as the product is being used. It contains
Replacing a wall-mounted thermostat
Replacing a wall-mounted thermostat You can watch this installation at: http://netatmo.com/video Warning Warning! Read these instructions carefully before starting the installation. The Netatmo Thermostat
ComfortNet CTK04 Featuring the RedLINK Suite of Home Comfort Solutions
ComfortNet CTK04 Featuring the RedLINK Suite of Home Comfort Solutions Agenda Comfort Advantage System Configurations Installing ComfortNet ComfortNet Control Set up Dehumidification and Defrost Settings
Quick start guide. Connected wireless room thermostat. Logic Combi C / Logic Max Combi C / Vogue Gen 2 Combi / Vogue Max Combi
Quick start guide Connected wireless room thermostat Logic Combi C / Logic Max Combi C / Vogue Gen 2 Combi / Vogue Max Combi Introduction Welcome to the Ideal Touch quick start guide. This guide is designed
Underfloor Catalogue Heating products that define the market
YEAR 5 WARRANTY Underfloor Catalogue Heating products that define the market By Underfloor Heating Control We provide a range of room temperature controls (thermostats) to optimize the operating efficiency
Installer and User Manual. BeSMART. Thermostat WiFi Box and boiler RF receiver. Installer and User Manual ESC MODE SET PROG RESET
Installer and User Manual BeSMART Thermostat WiFi Box and boiler RF receiver Installer and User Manual EN Dear Customer, Thank you for choosing the BeSMART control. This control device for heating (and
T6 and T6R SMART THERMOSTAT FEATURES PRODUCT SPECIFICATION SHEET
T6 and T6R SMART THERMOSTAT PRODUCT SPECIFICATION SHEET The T6/T6R smart thermostats are designed to provide automatic time and temperature control of heating systems in homes and apartments. It s compatible
Wireless Controls System Guide
Wireless Controls System Guide As of September 6, 2018 Table of Contents 1.0 Introduction Why SALUS?... 1.1 Using this Manual.... 1.1 2.0 System Overview SALUS Wireless System Components with Internet
Register the Gateway via PC. Package Content. Gateway Installation. 1 x Gateway 1 x Voice Siren 1 x IP Camera*
Package Content 1 x Gateway 1 x Voice Siren 1 x IP Camera* Register the Gateway via PC Create a new account at www.elro-smartalarm.com 1. Click on Create a new account 1 x PIR Motion 1 x Magnetic 1 x Remote
ALSET-2000 WIRELESS SECURITY SYSTEM
SECURITY PLUS-LINE ALSET-2000 QUICK INSTALL GUIDE MULTI LANGUAGE Item 71116 Version 1.0 Visit www.trust.com for the latest instructions ALSET-2000 WIRELESS SECURITY SYSTEM 1 On Off u v w x 2 3 Learn button
EWR2 WIRELESS SIGNAL REPEATER
SIGNAL REPEATER User manual v1.0 Compatible with: ESIM364 Ver.02.07.11 and up EPIR3 Ver.01.01.00 and up EWP1 Ver.16 and up EKB3W Ver.8 and up EW1 Ver.33 and up EWS1 Ver.16 and up EWD1 Ver.19 and up EWK1
Floor Heating Control with Homematic IP
Floor Heating Control with Homematic IP WHAT MAKES HOMEMATIC IP SO SPECIAL Homematic IP is the next generation of the successful smart home system Homematic by eq-3. The constantly growing product range
Sync. Smart Home Alarm
Sync. Smart Home Alarm Installation Manual IA-30 IA-320 IA-330 IA-340 Thank you for choosing the Yale Sync Smart Home Alarm. This simple to install system has been designed with the user in mind, just
Smart Thermostat. tado GmbH Lindwurmstr Munich tado.com
Smart Thermostat tado GmbH Lindwurmstr. 76 80337 Munich tado.com Smart Thermostat tado GmbH Lindwurmstr. 76 80337 Munich tado.com Introduction We are tado We believe that every home should have an intelligent
Electronic Thermostat With RF
Electronic Thermostat With RF Model No: ERT20RF INSTRUCTION MANUAL 2 ERT20RF PRODUCT COMPLIANCE SALUS Controls Plc hereby declares that this product is in compliance with Directives 2004/108/EC, 2006/95/EEC
WIRELESS MEASUREMENT SYSTEM OF GAS BOTTLES FILLING LEVEL WITH GAS LEAK DETECTION GMS 300. User Manual
EN WIRELESS MEASUREMENT SYSTEM OF GAS BOTTLES FILLING LEVEL WITH GAS LEAK DETECTION GMS 300 User Manual EN Wireless measuring pad Wireless measurement display Michal Provázek s.r.o. I.P. Pavlova 126 779
Getting started with
Getting started with The Heating Hub Unit sits at the heart of your Polypipe system and makes your home cloud connected for both monitoring and control. IN THE BOX: Heating Hub Unit Plug top mains power
ALARM OUTPUT MODULE. Product #7736
ALARM OUTPUT MODULE The Alarm Output Module (AOM) enables you to use weather station alarms or commands from your computer to automatically start or stop external devices such as indicator lights, audio
Smart Wireless Sensor
Smart Wireless Sensor G7 G7 creates the IoT platform of sensor data exchange and integration 64 wireless sensors each station * temperature, humidity, analog sensors, or digital alarm Windows / ios / Android
PRO Installation. Touch Wi-Fi Thermostat
PRO Installation Touch Wi-Fi Thermostat 1 Designed by the pros for the pros There are a lot of choices when it comes to buying a thermostat, but only one combines 125 years of experience and the latest
Skyport Wi-Fi Installation for the ColorTouch in 5 Easy Steps
Skyport Wi-Fi Installation for the ColorTouch in 5 Easy Steps Secure Internet Connection Computer Update ColorTouch to firmware version 2.0 or higher* Install the Wi-Fi Key and connect to a local router
Smart Wireless Sensor
Smart Wireless Sensor G7 G7 creates the IoT platform of sensor data exchange and integration 64 wireless sensors each station * temperature, humidity, analog sensors, or digital alarm Windows / ios / Android
Connected Control (BCC100)
Connected Control (BCC100) Wi-Fi Thermostat. Bosch Thermotechnology (625) PRODUCT CATEGORY: Controls and Instrumentation DATE PRODUCT WAS INTRODUCED TO THE CANADIAN MARKET: October 2017 IS THIS PRODUCT
PRO Installation. Thermostat Wi-Fi
PRO Installation Thermostat Wi-Fi 1 Designed by the pros for the pros There are a lot of choices when it comes to buying a thermostat, but only one combines 125 years of experience and the latest connected
The easier, smarter heating system. Multi-zone heating made easy. User guide Setup and control
The easier, smarter heating system Multi-zone heating made easy User guide Setup and control Getting to know the Wiser system Wiser system Smart heating for your home Wiser is designed to be simple to
Installation Guide. DEVIreg Smart. Intelligent Electronic Timer Thermostat with Wi-Fi connectivity and App control.
DEVIreg Smart Intelligent Electronic Timer Thermostat with Wi-Fi connectivity and App control www.devi.com Table of Contents 1 Introduction................... 2 2 Technical Specifications............ 4
Netatmo Thermostat user manual Netatmo Thermostat V1.0 / December 2013 You can nd an interactive version of this user manual in your Netatmo app
Netatmo Thermostat user manual Netatmo Thermostat V1.0 / December 2013 You can nd an interactive version of this user manual in your Netatmo app (iphone/ipad/android). It is also available for computer
Instructions for the fan motor control system with integrated wiring terminals SILVER C
Instructions for the fan motor control system with integrated wiring terminals SILVER C 1. General The motor control system is used for controlling the type EC, 0.41-10 kw fan motors in the SILVER C units.
Wi-Fi Thermostat. Sensi TM INSTALLATION GUIDE. Models: 1F86U-42WF, UP500W Version: October Emerson Electric Co. All rights reserved.
Sensi TM Wi-Fi Thermostat INSTALLATION GUIDE Models: 1F86U-42WF, UP500W Version: October 2017 2017 Emerson Electric Co. All rights reserved. CONTENTS Installation guide Downloading the Sensi app 3 Creating
User Manual - Energenie MiHome etrv
User Manual - Energenie MiHome etrv Thank you for buying the MiHome etrv (electronic Thermostatic Radiator Valve). Please read through this manual before using the product, and follow the instructions.
ABOUT THIS DOCUMENT AND THE DOCUMENT STRUCTURE WE USE
ABOUT THIS DOCUMENT AND THE DOCUMENT STRUCTURE WE USE isocket Smart Relay is a complex Smart House system which is installed in the fuse cabinet (electric cabinet) in the house. We therefore assume that
Replacing a wall-mounted thermostat
1 Replacing a wall-mounted thermostat You can watch this installation at: http://netatmo.com/video1 Warning Warning! Read these instructions carefully before starting the installation. The Netatmo Thermostat
Installation Guide for. Energate Thermostats. Pioneer release 2.3 and HōlHōm/Foundation release 3.5
Installation Guide for Energate Thermostats Pioneer release 2.3 and HōlHōm/Foundation release 3.5 Table of Contents 1 Introduction... 4 1.1 Operating the HōlHōm/Foundation Thermostat... 5 1.2 Operating
A WLAN compatible router Valid address Smartphone. 1. Select a language. Tap the language to select. Tap to view more languages. Tap.
Quick guide Smart Thermostat RDS120 en Welcome! This Quick guide walks you through: o Steps to connect the thermostat to the Internet. o Steps to configure the thermostat to work with your heating or AC
Q3200 Smart Home Alarm. Kit Content and Installation Guide
Q3200 Smart Home Alarm Kit Content and Installation Guide Table of Contents 1. Introduction 1 2. Installation 4 3. Troubleshooting & Factory Reset 7 4. Specifications 9 Information and illustrations are
Thermostats & smart controls. neohub+ UNDERFLOOR HEATING HEAT PUMPS SOLAR THERMAL
Thermostats & smart controls neohub+ UNDERFLOOR HEATING HEAT PUMPS SOLAR THERMAL GS UFH s thermostat range controls with area zoning can save up to 40% on energy bills.* *When compared to an unzoned radiator
Q3000 Smart Home Alarm. Kit Content and Installation Guide
Q3000 Smart Home Alarm Kit Content and Installation Guide Table of Contents 1. Introduction 1 2. Installation 4 3. Troubleshooting & Factory Reset 7 4. Specifications 9 Information and illustrations are
Salusfin Smart heating control: Installation Guide
Salusfin Smart heating control: Installation Guide Detailed instruction can be found on our web site on all installation phases: FAQ s, Technical user guides and manufacturer s manuals. Video links can
Home. evohome WiFi MULTI-ZONE SYSTEM
Home evohome WiFi MULTI-ZONE SYSTEM evohome is a sophisticated heating system that ensures you can create and individually control up to 12 heating zones in domestic properties. evohome will also control
evohome controls evohome consists of a number of quality components manufactured by the UK s leading manufacturer of home heating controls.
evohome controls evohome consists of a number of quality components manufactured by the UK s leading manufacturer of home heating controls. Radiator controllers The radiator controllers use two-way communication
Security designed for your lifestyle
Security designed for your lifestyle The Paradox Insight : The Big Picture A single CAT5 or higher cable can be used to wire a single HD77 camera. Camera Detector Module HD 720p camera Quad PIR with auto
Added password for IP setup page : Password must be in IP format!
NETWORK POWER MONITOR Release : 21 August 2014 Hardware Version : Version 7 Firmware version 1.00 PC Application Software : Version (latest)...2 Added password for IP setup page : Password must be in IP
COMPUTHERM Q3 digital room thermostat
COMPUTHERM Q3 digital room thermostat Operating Instructions NEW design! GENERAL DESCRIPTION OF THE THERMOSTAT The COMPUTHERM Q3 type switched-mode room thermostat is suitable to regulate the overwhelming
evohome multi-zone system evohome
evohome evohome multi-zone system evohome is a sophisticated heating system that ensures you can create and individually control up to 12 heating zones in domestic properties. evohome will also control
Home. evohome multi-zone, Lyric T6 programmable thermostat and Single Zone thermostat. Smart Heating Controls THE COMPLETE CONNECTED CHOICE
Home evohome multi-zone, Lyric T6 programmable thermostat and Single Zone thermostat Smart Heating Controls THE COMPLETE CONNECTED CHOICE A smart heating solution for all Honeywell offers a truly smart
Telemetry Communications Device. Installation Guide. Interface for the Emizon managed network. Issue 1: February 2008
TCD Telemetry Communications Device Installation Guide Interface for the Emizon managed network Issue 1: February 2008 This guide sets out a simple check list together with a step-by-step guide to the
Esmi Sense FDP Fire detection panel with ALC2 loop controller
Esmi Sense FDP Fire detection panel The intelligent and modular Esmi Sense FDP fire detection panel provides multiple new features for efficient and reliable fire safety. The Esmi Sense FDP fire detection
PRO Installation. Touch Wi-Fi Thermostat
PRO Installation Touch Wi-Fi Thermostat 1 Designed by the pros for the pros There are a lot of choices when it comes to buying a thermostat, but only one combines 125 years of experience and the latest
Learning Thermostat Installation Guide. Installation step by step
Learning Thermostat Installation Guide Installation step by step First, a word about privacy. We re committed to being open and honest about how we use data. We will always ask for permission before sharing
GSM Alarm System. User s Manual. Profile. MOBILE CALL GSM Alarm System
MOBILE CALL GSM Alarm System GSM Alarm System System disarmed 11/26/2013 User s Manual Profile For a better understanding of this product, please read this user manual thoroughly before using it. CONTENTS
PRT-TS WiFi PRT-TS WiFi
Model: PRT-TS WiFi Model: PRT-TS WiFi 1 Model: PRT-TS WiFi Table Of Contents Product Image 1 Frost Protection 16 Table of Contents 2 Heating ON/OFF 16 What is a Programmable Room Thermostat? Installation
CentaurPlus ZW and HRT4-ZW
CentaurPlus ZW and HRT4-ZW Installation Instructions The Horstmann CentaurPlus ZW combined wireless room stat and timeswitch allows a combi boiler system to have a room thermostat added without the need
ZIPAMINI. Smart Home Controller. make your home smart. Control your home from anywhere in the world. find out more at
ZIPAMINI Smart Home Controller Control your home from anywhere in the world ZIPAMINI Connect everything Makes every home safe, comfortable and energy efficient MAKES EVERY HOME SMART Everyone likes the
The easier, smarter heating system. Multi-zone heating made easy. User guide Setup and control
The easier, smarter heating system Multi-zone heating made easy User guide Setup and control Getting to know the Wiser system Wiser system Smart heating for your home Wiser is an advanced home heating
600 Range Dialer Installation Manual. Version 1.0
600 Range Dialer Installation Manual Version 1.0 The information contained is supplied without liability for any errors or omissions. No part may be reproduced or used except as authorised by contract
Smart Temp. ApolloP/n Installation Manual. Version 1.0
Smart Temp ApolloP/n 44-800 Installation Manual Version 1.0 TABLE OF CONTENTS Introduction...6 Getting started...7 Installing the thermostat...8 Disassembly...8 Thermostat location...8 Mounting the subbase...8,
Roth Touchline. German quality since Quick and easy user manual 1/10
Roth Touchline Quick and easy user manual German quality since 197 1/10 230 V Pump N N L L 230 V 230 V 2 V 2 V c/o in %H c/o out c/o in Trafo out /TB in N L eco 2V CH 1 CH 2 CH 3 CH 2V 2V 2V 2V 2V Touchline,
Operating instructions
Operating instructions Migo GB, IE Contents Contents 1 Safety... 3 1.1 Action-related warnings... 3 1.2 Intended use... 3 1.3 General safety information... 4 2 Notes on the documentation... 5 2.1 Observing
Curv-infrared.com. The Smarter Way. To Heat Your Home. Installation & Operating Instructions For Cürv, Flat, Towel Rail and Mirror Infrared Heaters
Curv-infrared.com The Smarter Way To Heat Your Home Installation & Operating Instructions For Cürv, Flat, Towel Rail and Mirror Infrared Heaters Safety Precautions Important Notice To Purchaser Before
Ontech GSM 9040/50. Reference Manual English -1 -
Ontech GSM 9040/50 Reference Manual English -1 - Content Welcome... 5 This manual... 5 Text styles... 5 Support... 5 Disclaimer... 5 Overview... 6 Accessories... 6 External temperature sensor 9901... 7
English. Doro CareIP Mobile. User Guide
English Doro CareIP Mobile User Guide 1. Read first: Safety information Always read and follow the safety information accompanied by this symbol. User s should pay particular attention to the potential
PWM. Solar Charge controller with Ethernet. Solar Smart PWM 20Amp. Hardware Description : Release : 19 June 2014
Solar Charge controller with Ethernet Release : 19 June 2014 Hardware Version : Version 1 Firmware version 1 PC Application Software : Version 1.0.0.0 Hardware Description : The Solar Smart regulator was
Control-R Wi-Fi Module
ENGLISH Control-R Wi-Fi Module Installation Manual For Your Records If you have support questions, please call Customer Care and have your Control-R Wi-Fi module s AYLA ID and Water Heater Serial Number
Digimax 210. Programmable Thermostat Compatible with Maxi Controller. User Guide
Digimax 210 Programmable Thermostat Compatible with Maxi Controller User Guide Schema of the thermostat RF DigiMax 210 Ambient temperature Set Key Up Key Down Key The RF DigiMax 210 thermostat does not
Applications: 27. NETIChome mobile ios 28. NETIChome mobile Android. NETIChome basic elements
INDEX 1 NETIC... 2 2 Door/Window detector MINI... 2 3 FOUR sensor... 3 4 Smoke detector... 3 5 Flood detector... 4 6 ILLumination sensor... 4 7 Lamp holder... 5 8 Siren... 5 9 Power meter & switch... 6
Instructions for the fan motor control system, SILVER C
Instructions for the fan motor control system, SILVER C 1. General The motor control system is used for controlling the type EC, 0.41-10 kw fan motors in the SILVER C units. The motor control system is
Contents. Most Trusted and Best Rated Quality Products. PX-1 Stand-Alone Smoke Alarm. PX-1C Radiolink Smoke Alarm.
Product Line 2018 PX-I Stand-Alone Smoke Alarm PX- IC Radiolink Smoke Alarm PX-AR Alarm Relay PX-iP Wi-Fi Smoke Alarm System Pyrexx Web-App Design Variety EN Contents 04 05 06 07 08 09 10 11 12 21 22 23
IndigoVision Alarm Panel. User Guide
IndigoVision Alarm Panel User Guide THIS MANUAL WAS CREATED ON 2/21/2017. DOCUMENT ID: IU-AP-MAN002-4 Legal considerations LAWS THAT CAN VARY FROM COUNTRY TO COUNTRY MAY PROHIBIT CAMERA SURVEILLANCE. PLEASE
CPS3200U Technical Support Guide
CPS3200U Technical Support Guide Product Manual Comcode CC848853457 Issue 1 September 2008 7 1 COMPACT POWER LINE SHELVES MODELS J85480S1 AND J2007001 Ordering Guide June 2008 Matrix File # CC848849397-MAN
Integrated Security Solutions
Integrated Security Solutions Table of Contents Control Panels 4 Keypads 8 Communication Modules 16 I/O Expanders 20 Door Control 24 Home Automation 25 RF Receivers 26 3 Our integrated security solutions
Package Included. Bobbie. template. stickers
Installation manual Package Included Bobbie Temperature sensors Fasteners Installation template 1m cable 3x2,5m2 2x brackets Installation stickers Compatibility Bobbie connects to your home Wi-Fi network
With Magictrl, you can control MatiGard anytime & anywhere via your smartphone, even without data network.
MatiGard User Guide 02 Menu Feature-------------------------------------------------------------- 05 Overviews---------------------------------------------------------- 07 Read Before Using-----------------------------------------------
System. For a better understanding of this product, please read this user manual thoroughly before using it.
GSM Alarm System User s Manual For a better understanding of this product, please read this user manual thoroughly before using it. Chapter 1. Features Chapter 2. Control Panel Introduction Chapter 3.