Pricelist Heating Prices and technical information for Heating products

Transcription

1 Pricelist Prices and technical information for products

2 Table of contents Overview split heat pumps 4 Air-to-water heat pump 6 Daikin Altherma LT compact 6 Daikin Altherma LT wall mounted 13 Daikin Altherma LT integrated 18 Daikin Altherma LT outdoor unit 23 Daikin Altherma HT 24 Heat pump convector 28 Hygienic storage tank 29 Daikin Altherma ground source heat pump 34 Daikin Altherma hybrid heat pump 36 Daikin Altherma monobloc 41 Daikin Altherma Flex type 46 Rotex combustion and system components 51 Boiler 53 A1 oil condensing 53 GCU compact 56 Flue gas systems 60 Thermal store 105 Sanicube / HybridCube 105 Solar heating system 115 Material combinations 115 Solaris 118 Heat distribution 127 Monopex, System Room control 135 Fuel oil tanks 139 Variosafe 139 Variosystem / highcube 141 Rainwater storage tanks 145 Variocistern 145 Energy efficiency class overview 146 Daikin Services 155 Commercial Terms & Conditions 167 NOTES The pricelist is valid from 1. April All prior pricelists are not valid anymore. All prices are list prices in Euro and excl. VAT. The Daikin Commercial Terms and Conditions apply (see last page or We reserve the right for printing errors and model changes. An overview of ROTEX spare parts is available at > Service > Spare Parts. For more information please consult your local Daikin contact person. 2

3 Heat Pump Highlights p.6 Daikin Altherma Low Temperature compact heat pump Integrated solar unit, maximising renewable energy and offering top comfort in heating and hot water Solar support for domestic hot water and space heating Drain-Back solar (standard version) or pressurized solar (Biv Version) Lightweight plastic tank with separate benefits App control possible p.13 Daikin Altherma Low Temperature wall mounted heat pump Perfect fit for new built and for low energy houses Best seasonal efficiencies, providing the highest savings on running costs Flexible configuration with respect to heat emitters Energy efficient heating only system based on air to water heat pump technology p.18 Daikin Altherma Low Temperature integrated heat pump Two different temperature zones automatically regulated by the same indoor unit as option Integrated heating and hot water unit, saving installation space and time Higher efficiencies at every ambient and flow temperature p.34 Daikin Altherma ground source heat pump Ground source heat pump technology uses stable geothermal energy, unaffected by the outside temperature Highest seasonal efficiency thanks to our inverter heat pump technology Quick and easy installation thanks to factory- fitted piping on top of the unit and reduced overall weight p.36 Daikin Altherma hybrid heat pump The ideal solution for the replacement of a gas boiler and domestic hot water Automatically selects the most economic mode for operation depending on outdoor temperature, energy prices and the internal heat load Upt to 35% efficiency increase compared to condensing boilers COP in heat pump operation: 5,04 3

4 Smart Heat Pumps Smart Heat Pumps Heat pump Overview DAIKIN heat pumps Altherma LT compact Altherma LT wall mounted Altherma LT integrated Altherma high temperature Air-to-water heat pump for combination with solar (Solaris Drain Back or pressurised solutions with Biv. models) Air-to-water heat pump Ait-to-water heat pump for qickest installation, with integrated domestic hot water tank. Air-to-water heat pump SG Ready Advantages Maximum flow temperature 55 C Output-modulating operation, inverter technology Content of storage tank 300 or 500 litres and cooling Smart Grid Ready For hot water, heating and cooling Maximum flow temperature 55 C Output range 4 to 16 kw Output-modulating operation, inverter technology For hot water, heating and cooling Maximum flow temperature 55 C Output range 4 to 16 kw Includes a stainless steel domestic hot water tank For hot water and heating Maximum flow temperature 80 C Output range 11 to 16 kw Output-modulating operation, inverter technology Maximum flow temperature 55 C 80 C New-build applications Existing building underfloor heating or Low-temperature radiators (50 C) Existing buildings with radiators above 50 C Bivalency option integrated second heat generator can be connected and hot water Combination with solar (can also be retro-fitted) / Cooling (Comfort 365) The components outdoor unit indoor unit Hygienic storage facility with solar option Stainless steel storage tank standard optional not available SG Ready The SG Ready label is issued exclusively in Germany. It indicates that the control technology of the individual heat pump allows incorporation of an intelligent mains power network. 4

5 Altherma ground source Altherma hybrid Altherma monobloc Advantages Ground source heat pump Compact ground source heat pump with integrated domestic hot water tank For space heating and domestic hot water Stainless steel domstic hot water tank 180 liter Maximum flow temperature (heat pump operation) 60 C Modulating operation, Inverter-Technology Hybrid heat pump (Air-to-water) Combination of heat pump split system outdoor unit, indoor unit and gas-fired condensing boiler and cooling Maximum flow temperature 80 C Performance modulating operation, inverter technology Air-to-water heat pump Solo unit for installation outdoors (installation without coolant line) Maximum flow temperature 55 C Output-modulating operation, inverter technology and cooling Maximum flow temperature (with BUH) 65 C 80 C 55 C New-build applications Existing building underfloor heating or Low-temperature radiators (50 C) Existing buildings with radiators above 50 C Bivalency option integrated second heat generator can be connected and hot water Combination with solar (can also be retro-fitted) * Cooling (Comfort 365) The components outdoor unit indoor unit Hygienic storage facility with solar option Stainless steel storage tank standard optional not available * only for domestic water heating 5

6 Air-to-water heat pump Daikin Altherma LT Split wall mounted Split air-to-water heat pumps up to 55 C flow Daikin Altherma LT split wall mounted indoor unit For outdoor unit 4 16 kw. Hydraulically equipped with high-efficiency pump, expansion vessel, safety module with pressure gauge and safety valve, flow monitor and filling and evacuation valves and brass dirt trap. Electrical equipment with load contactors for 3/6/9 kw auxiliary electric heating and heat circulating pump. User Interface is not included, EKRUCBL* is mandatory for system operation. please order it additionally according to your needed languages. Dimensions (W x D x H) 502 x 361 x 922 mm. only: EHBH 4 kw indoor unit with 3 kw electric immersion heater 1~230 V for 4 kw outdoor unit. (4 kw only available as 1~ 230 V) EHBH 8 kw indoor unit with 3 kw electric immersion heater 1~230 V for 6 8 kw outdoor unit. EHBH 11 kw indoor unit with 3 kw electric immersion heater 1~230 V for 11 kw outdoor unit. EHBH 16 kw indoor unit with 3 kw electric immersion heater 1~230 V for kw outdoor unit. EHBH 8 kw indoor unit with 9 kw electric immersion heater 3~400 V for 6 8 kw outdoor unit. EHBH 11 kw indoor unit with 9 kw electric immersion heater 3~400 V for 11 kw outdoor unit. EHBH 16 kw indoor unit with 9 kw electric immersion heater 3~400 V for kw outdoor unit. and cooling: EHBX 4 kw indoor unit with 3 kw electric immersion heater 1~230 V for 4 kw outdoor unit. (4 kw only available as 1~ 230 V) EHBX 8 kw indoor unit with 3 kw electric immersion heater 1~230 V for 6 8 kw outdoor unit. EHBX 11 kw indoor unit with 3 kw electric immersion heater 1~230 V for 11 kw outdoor unit. EHBX 16 kw indoor unit with 3 kw electric immersion heater 1~230 V for kw outdoor unit. EHBX 8 kw indoor unit with 9 kw electric immersion heater 3~400 V for 6 8 kw outdoor unit. EHBX 11 kw indoor unit with 9 kw electric immersion heater 3~400 V for 11 kw outdoor unit. EHBX 16 kw indoor unit with 9 kw electric immersion heater 3~400 V for kw outdoor unit. Type / Order Nr. EHBH04CB3V EHBH08CB3V EHBH11CB3V EHBH16CB3V EHBH08CB9W EHBH11CB9W EHBH16CB9W EHBX04CB3V EHBX08CB3V EHBX11CB3V EHBX16CB3V EHBX08CB9W EHBX11CB9W EHBX16CB9W Price HUF , , , , , , , , , , , , , ,- For the price of the outdoor unit, please check page

7 Air-to-water heat pump, LT Split wall mounted Accessories user interface as remote control of the hybrid gas heat pump including room thermostat function. A maximum of 2 control and display units are used. Languages: German, French, Italian, Dutch Languages: English, Swedish, Norwegian, Finnish Languages: English, Spanish, Greek, Potuguese Languages: English, Turkish, Polish, Romanian Languages: German, Czech, Slovenian, Slovak Languages: English, Croatian, Hungarian, Bulgarian Languages: English, German, Russian, Danish Remote indoor sensor Temperature measurement remotely from user interface. By default the internal user interface sensor will be used as room temperature sensor. As an option the remote indoor sensor can be installed to measure the room temperature on another location. EKRUCBL1 EKRUCBL2 EKRUCBL3 EKRUCBL4 EKRUCBL5 EKRUCBL6 EKRUCBL7 Type / Order Nr. EKRUCBL1 EKRUCBL2 EKRUCBL3 EKRUCBL4 EKRUCBL5 EKRUCBL6 EKRUCBL7 Price HUF , , , , , , ,- NetAtmo room thermostat For heating use only! Take control of your home's temperature with the Thermostat for smartphones, tablets and laptops. RTRNETA2AA RTRNETA2AA not relevant Option 1: Cabled room thermostat EKRTWA Option 2: Wireless room thermostat EKRTR KRCS , , ,- Floor screed temperature sensor EKRTETS 5.166,- 14

8 Air-to-water heat pump, LT Split wall mounted Accessories Booster heater supplementary heating for Altherma LT wall mounted in combination with hygienic storage tank Electric immersion heater 230 V-50 Hz / 3000 Watt to support the heat pumps as a booster heater. 900 mm long. incl. contactor/fuse assembly for LT wall mounted Storage tank sensor for Altherma LT wall mounted For use if no E-Pac is being used and the heat pump is directly connected to the storage tank (by customer). 3-way switch valve 1" male 3-way switch valve 1" male thread with motor drive 240 V, switching time 6 sec. including connection cable 2 m. Type Order No. Price HUF EKBH3S EKBH3S ,- SF LT ,- 3-W SV ,- Kit for connection of third party domestic hot water tanks contains 3 way valve, contactor/fuse assembly for dhw tank booster heater of max. 3 kw, LT thermistor Digital I/O PCB Communication unit for Altherma LT wall mounted, Altherma HT for several use cases eg. status and alarm signal. EKUMBPART EKUMBPART ,- for commuication to SOLARIS order SOL-PAC LT/HT EKRP1HBA EKRP1HBA ,- Burner blocking contact connection cable For RPS2, RPS3, RPS3 M, RPS3 25 M. BSKK RTX 5.812,- Condensate drain pan for Internal Unit EKHBDPC2 EKHBDPC ,- Interface cable for configuration of the heat pump controller EKPCCAB3 EKPCCAB ,- Via PC, for LT wall mounted, LT ground source and Altherma hybrid Decentalised outdoor temperature sensor Ambient temperature measurement remotely from outdoor unit Demand PCB (4-8 kw) Power consumption limitation with 4 digital inputs on hydrobox Demand PCB (11-16 kw) Power consumption limitation via outdoor unit Electricity meter Single phase electricity meter Electricity meter Three phase electricity meter Overflow valve Overflow valve DN 20 or DN 25 with fitting with angle body. Necessary component of an Altherma LT heat pump system excluding Altherma LT compact, in order to the minimum flow rate on the indoor unit. EKRSC1 EKRSC ,- EKRP1AHT EKRP1AHT ,- KRP58M51 KRP58M ,- K.ELECMETV K.ELECMETV ,- UESV 20 UESV K.ELECMETW K.ELECMETW , , ,- Hydraulic diverter DN 125 for LT compact, LT wall mounted and HT Consisting of DN125 round pipe sub-divided into four zones (using perforated separator discs, length approx mm), equipped with 8 x heating circuit connections 1" male thread, and a 1 x ½" sleeve and standing foot. Max. permissible operating pressure: 6 bar, max. permissible temperature: 110 C. Thermal insulation for hydraulic diverter Thermal insulation, consisting of 60 mm PUR foam in a galvanised sheet steel casing. Sludge and magnetite separator Compact sludge separator with drain cock and thermal insulation. Input G1-IG (union nut), outlet G1-lG. HWC not relevant WHWC not relevant SAS not relevant * Delivery period available on request. 15

9 Technical data Air-to-water heat pump, LT Split wall mounted LT wall mounted indoor unit Basic data Altherma LT wall mounted 4 kw 6 8 kw 11 kw kw EHBH(X)04CB3V EHBH(X)08CB9W EHBH(X)11CB9W EHBH(X)16CB9W / and cooling Sound pressure level db(a) Colour white (RAL 9010) Unit dimesnsions (W x D x H) mm 480 x 344 x 890 Unit weight kg Operating range, flow temperature (heating) Connection refrigerant line C Min: 15 / Max: 55 Min: 15 / Max: 55 Min: 15 / Max: 55 Min: 15 / Max: 55 Gas lines " (mm) 5/8 (15,9) 5/8 (15,9) 5/8 (15,9) 5/8 (15,9) Liquid line " (mm) 1/4 (6,4) 1/4 (6,4) 3/8 (9,5) 3/8 (9,5) Type Backup Heater 3V 9W output kw 3 9 Power supply, phase 1~ 3~ Power supply Frequency Hz Power supply Voltage V Operating current A

10 Technical data Air-to-water heat pump, LT Split wall mounted LT outdoor unit for LT wall mounted indoor unit ~1 / 230 V ~1/230 V ~3 / 400 V 4 kw 6 kw 8 kw 11 kw 14 kw 16 kw 11 kw 14 kw 16 kw ERLQ004CV3 ERLQ006CV3 ERLQ008CV3 ERLQ011CV3 ERLQ014CV3 ERLQ016CV3 ERLQ011CW1 ERLQ014CW1 ERLQ016CW1 Basic data Nominal heat output A-7 / W35 kw 4,37 5,31 5,46 8,6 10,0 11,1 8,6 10,0 11,1 Nominal heat output A2 / W35 kw 3,27 4,58 5,8 8,56 10,3 11,1 8,56 10,3 11,1 Nominal heat output A7 / W35 kw 4,4 6 7,4 11,2 14,5 16,0 11,2 14,5 16,0 Nominal COP A-7 / W35 2,81 2,84 2,71 2,75 2,65 2,64 2,75 2,65 2,64 Nominal COP A2 / W35 4,02 3,66 3,53 3,6 3,41 3,35 3,6 3,41 3,35 Nominal heat output A7 / W35 5,04 4,74 4,45 4,6 4,3 4,25 4,6 4,3 4,25 Nominal COP A10 / W35 5,12 5,07 4,75 4,85 4,7 4,5 4,85 4,7 4,5 Nominal EER A35 / W18 1) 4,55 3,89 3,79 3,32 3,96 3,69 3,32 3,96 3,69 Max. heat output A-7 / W35 kw 4,6 5,3 6,4 8,8 11,7 12,3 8,8 11,7 12,3 Max. heat output A2 / W35 kw 4,8 6,4 7,7 9,1 10,9 11,4 9,1 10,9 11,4 Max. heat output A7 / W35 kw 5,1 8,4 10,2 11,4 14,6 16,1 11,4 14,6 16,1 Max. cooling output A35 / W18 1) kw 5,9 7,3 8,4 15,1 16,1 16,8 15,1 16,1 16,8 Max. cooling output A35 / W7 1) kw 4,5 5,5 6,4 11,7 12,6 13,1 11,7 12,6 13,1 Unit dimesnsions (W x D x H) mm 832 x 307 x x 320 x x 320 x 1345 Unit weight kg Operating range outdoor temperature () C Min: -25 / Max: 25 Min: -25 / Max: 35 Min: -25 / Max: 35 Operating range outdoor temperature Min: 10 / Max: 46 Min: 10 / Max: 46 C Min: 10 / Max: 43 (Cooling) 2) Operating range outdoor temperature (tap water) C Min: -25 / Max: 35 Min: -20 / Max: 35 Min: -20 / Max: 35 Sound pressure level (heating) * db (A) Sound pressure level (cooling)* 1) db (A) Sound power level (heating) db (A) Sound power level (cooling) 1) db (A) Power supply, phase 1 ~ 1 ~ 3 ~ Power supply Frequency Hz Power supply Voltage V Inrush current A 18 34,2 13,5 Operating current (maximum) A 15,7 16,3 16,3 Refrigerant R410A R410A R410A Coolant volume (prefilled) kg 1,45 1,6 3,4 3,4 GWP 2087,5 2087,5 2087,5 TCO2eq 3,03 3,3 7,1 7,1 Connection refrigerant line Gas lines " (mm) 5 / 8 (15,9) 5 / 8 (15,9) 5 / 8 (15,9) Liquid line " (mm) 1 / 4 (6,4) 3 / 8 (9,5) 3 / 8 (9,5) Refrigerant line length max. 2) m Refrigerant line length min. m * at 1 m separation 1) Only for devices heating and cooling 2) The pre-filled amount of refrigerant in the outdoor unit is sufficient for a maximum refrigerant line length of 10 m. 17

11 Air-to-water heat pump Daikin Altherma LT Split integrated Split air-to-water heat pumps up to 55 C flow Daikin Altherma LT split integrated indoor unit For outdoor unit 4 16 kw. Hydraulically equipped with integrated domestic hot water tank (180 l for 4 16 kw; 260 l for 6 kw 16 kw), high-efficiency pump, expansion vessel, safety module with pressure gauge and safety valve, flow monitor and filling and evacuation valves and brass dirt trap. Electrical equipment with load contactors for 3/6/9 kw auxiliary electric heating and heat circulating pump. User Interface is not included, EKRUCBL* is mandatory for system operation. please order it additionally according to your needed languages. Dimensions (W x D x H) 600 x 728 x 1732 mm. only: EHVH 4 kw indoor unit with 180 l tank and 3 kw electric immersion heater 1~230 V for 4 kw outdoor unit. EHVH 8 kw indoor unit with 180 l tank and 3 kw electric immersion heater 1~230 V for 6 8 kw outdoor unit. EHVH 11 kw indoor unit with 180 l tank and 3 kw electric immersion heater 1~230 V for 11 kw outdoor unit. EHVH 16 kw indoor unit with 180 l tank and 3 kw electric immersion heater 1~230 V for kw outdoor unit. EHVH 8 kw indoor unit with 260 l tank and 9 kw electric immersion heater 3~400 V for 6 8 kw outdoor unit. EHVH 11 kw indoor unit with 260 l tank and 9 kw electric immersion heater 3~400 V for 11 kw outdoor unit. EHVH 16 kw indoor unit with 260 l tank and 9 kw electric immersion heater 3~400 V for kw outdoor unit. and cooling: EHVX 4 kw indoor unit with 180 l tank and 3 kw electric immersion heater 1~230 V for 4 kw outdoor unit. EHVX 8 kw indoor unit with 180 l tank and 3 kw electric immersion heater 1~230 V for 6 8 kw outdoor unit. EHVX 11 kw indoor unit with 180 l tank and 3 kw electric immersion heater 1~230 V for 11 kw outdoor unit. EHVX 16 kw indoor unit with 180 l tank and 3 kw electric immersion heater 1~230 V for kw outdoor unit. EHVX 8 kw indoor unit with 260 l tank and 9 kw electric immersion heater 3~400 V for 6 8 kw outdoor unit. EHVX 11 kw indoor unit with 260 l tank and 9 kw electric immersion heater 3~400 V for 11 kw outdoor unit. EHVX 16 kw indoor unit with 260 l tank and 9 kw electric immersion heater 3~400 V for kw outdoor unit. Type / Order Nr. EHVH04S18CB3V EHVH08S18CB3V EHVH11S18CB3V EHVH16S18CB3V EHVH08S26CB9W EHVH11S26CB9W EHVH16S26CB9W EHVX04S18CB3V EHVX08S18CB3V EHVX11S18CB3V EHVX16S18CB3V EHVX08S26CB9W EHVX11S26CB9W EHVX16S26CB9W Price HUF , , , , , , , , , , , , , ,- For the price of the outdoor unit, please check page

12 Air-to-water heat pump, LT Split integrated bizone indoor units, 1 phase 230 V Split air-to-water heat pumps up to 55 C flow Daikin Altherma LT split integrated indoor unit For outdoor unit 4 16 kw. Hydraulically equipped with integrated 180 l domestic hot water tank and all additional hydraulic acessories to realize systems with 1 unmixt zone and 1 mixing zone. High-efficiency pump, expansion vessel, safety module with pressure gauge and safety valve, flow monitor and filling and evacuation valves and brass dirt trap. Electrical equipment with load contactors for 3 kw auxiliary electric heating and heat circulating pump. User Interface is not included, EKRUCBL* is mandatory for system operation. please order it additionally according to your needed languages. Dimensions (W x D x H) 600 x 728 x 1732 mm. only: EHVZ 4 kw indoor unit with 180 l tank and 3 kw electric immersion heater 1~230 V for 4 kw outdoor unit. EHVZ 8 kw indoor unit with 180 l tank and 3 kw electric immersion heater 1~230 V for 6 8 kw outdoor unit. EHVZ 16 kw indoor unit with 180 l tank and 3 kw electric immersion heater 1~230 V for kw external unit. Type / Order Nr. EHVZ04S18CB3V EHVZ08S18CB3V EHVZ16S18CB3V Price HUF , , ,- For the price of the outdoor unit, please check page

13 Air-to-water heat pump, LT Split integrated bizone indoor units, 1 phase 230 V Accessories user interface as remote control of the hybrid gas heat pump including room thermostat function. A maximum of 2 control and display units are used. Languages: German, French, Italian, Dutch Languages: English, Swedish, Norwegian, Finnish Languages: English, Spanish, Greek, Potuguese Languages: English, Turkish, Polish, Romanian Languages: German, Czech, Slovenian, Slovak Languages: English, Croatian, Hungarian, Bulgarian Languages: English, German, Russian, Danish Remote indoor sensor Temperature measurement remotely from user interface. By default the internal user interface sensor will be used as room temperature sensor. As an option the remote indoor sensor can be installed to measure the room temperature on another location. EKRUCBL1 EKRUCBL2 EKRUCBL3 EKRUCBL4 EKRUCBL5 EKRUCBL6 EKRUCBL7 Type / Order Nr. EKRUCBL1 EKRUCBL2 EKRUCBL3 EKRUCBL4 EKRUCBL5 EKRUCBL6 EKRUCBL7 Price HUF , , , , , , ,- NetAtmo room thermostat For heating use only! Take control of your home's temperature with the Thermostat for smartphones, tablets and laptops. RTRNETA2AA RTRNETA2AA not relevant Option 1: Cabled room thermostat EKRTWA Option 2: Wireless room thermostat EKRTR KRCS , , ,- Floor screed temperature sensor EKRTETS 5.166,- Decentalised outdoor temperature sensor Ambient temperature measurement remotely from outdoor unit Demand PCB (4-8 kw) Power consumption limitation with 4 digital inputs on hydrobox Demand PCB (11-16 kw) Power consumption limitation via outdoor unit Electricity meter Single phase electricity meter Electricity meter Three phase electricity meter Overflow valve Overflow valve DN 20 or DN 25 with fitting with angle body. Necessary component of an Altherma LT heat pump system excluding Altherma LT compact, in order to the minimum flow rate on the indoor unit. EKRSC1 EKRSC ,- EKRP1AHT EKRP1AHT ,- KRP58M51 KRP58M ,- K.ELECMETV K.ELECMETV ,- UESV 20 UESV K.ELECMETW K.ELECMETW , , ,- Sludge and magnetite separator Compact sludge separator with drain cock and thermal insulation. Input G1-IG (union nut), outlet G1-lG. SAS not relevant 20

14 Technical data Air-to-water heat pump, LT Split integrated LT integrated indoor unit Basic data Altherma LT integrated 4 kw 6 8 kw 11 kw kw 6 8 kw 11 kw kw EHVH(X)04S18CB3V EHVH(X)08S18CB3V EHVH(X)11S18CB3V EHVH(X)16S18CB3V EHVH(X)08S26CB9W EHVH(X)11S26CB9W EHVH(X)16S26CB9W / and cooling Sound pressure level db(a) Colour white (RAL 9010) Unit dimesnsions (W x D x H) mm 600 x 728 x 1732 Unit weight kg Operating range, flow temperature (heating) Connection refrigerant line C Min: 15 / Max: 55 Min: 15 / Max: 55 Min: 15 / Max: 55 Min: 15 / Max: 55 Min: 15 / Max: 55 Min: 15 / Max: 55 Min: 15 / Max: 55 Gas lines " (mm) 5/8 (15,9) 5/8 (15,9) 5/8 (15,9) 5/8 (15,9) 5/8 (15,9) 5/8 (15,9) 5/8 (15,9) Liquid line " (mm) 1/4 (6,4) 1/4 (6,4) 3/8 (9,5) 3/8 (9,5) 1/4 (6,4) 3/8 (9,5) 3/8 (9,5) Dom. Hot Water Tank (l) Type Backup Heater 3V 9W output kw 3 9 Power supply, phase 1~ 3~ Power supply Frequency Hz Power supply Voltage V Operating current A

15 Technical data Air-to-water heat pump, LT Split integrated LT outdoor unit for LT integrated indoor unit ~1 / 230 V ~1/230 V ~3 / 400 V 4 kw 6 kw 8 kw 11 kw 14 kw 16 kw 11 kw 14 kw 16 kw ERLQ004CV3 ERLQ006CV3 ERLQ008CV3 ERLQ011CV3 ERLQ014CV3 ERLQ014CV3 ERLQ011CW1 ERLQ014CW1 ERLQ016CW1 Basic data Nominal heat output A-7 / W35 kw 4,37 5,31 5,46 8,6 10,0 11,1 8,6 10,0 11,1 Nominal heat output A2 / W35 kw 3,27 4,58 5,8 8,56 10,3 11,1 8,56 10,3 11,1 Nominal heat output A7 / W35 kw 4,4 6 7,4 11,2 14,5 16,0 11,2 14,5 16,0 Nominal COP A-7 / W35 2,81 2,84 2,71 2,75 2,65 2,64 2,75 2,65 2,64 Nominal COP A2 / W35 4,02 3,66 3,53 3,6 3,41 3,35 3,6 3,41 3,35 Nominal heat output A7 / W35 5,04 4,74 4,45 4,6 4,3 4,25 4,6 4,3 4,25 Nominal COP A10 / W35 5,12 5,07 4,75 4,85 4,7 4,5 4,85 4,7 4,5 Nominal EER A35 / W18 4,55 3,89 3,79 3,32 3,96 3,69 3,32 3,96 3,69 Max. heat output A-7 / W35 kw 4,6 5,3 6,4 8,8 11,7 12,3 8,8 11,7 12,3 Max. heat output A2 / W35 kw 4,8 6,4 7,7 9,1 10,9 11,4 9,1 10,9 11,4 Max. heat output A7 / W35 kw 5,1 8,4 10,2 11,4 14,6 16,1 11,4 14,6 16,1 Max. cooling output A35 / W18 1) kw 5,9 7,3 8,4 15,1 16,1 16,8 15,1 16,1 16,8 Max. cooling output A35 / W7 1) kw 4,5 5,5 6,4 11,7 12,6 13,1 11,7 12,6 13,1 Unit dimesnsions (W x D x H) mm 832 x 307 x x 320 x x 320 x 1345 Unit weight kg Operating range outdoor temperature () C Min: -25 / Max: 25 Min: -25 / Max: 35 Min: -25 / Max: 35 Operating range outdoor temperature Min: 10 / Max: 46 Min: 10 / Max: 46 C Min: 10 / Max: 43 (Cooling) 2) Operating range outdoor temperature (tap water) C Min: -25 / Max: 35 Min: -20 / Max: 35 Min: -20 / Max: 35 Sound pressure level (heating) * db (A) Sound pressure level (cooling)* 1) db (A) Sound power level (heating) db (A) Sound power level (cooling) 1) db (A) Power supply, phase 1 ~ 1 ~ 3 ~ Power supply Frequency Hz Power supply Voltage V Inrush current A 18 34,2 13,5 Operating current (maximum) A 15,7 16,3 16,3 Refrigerant R410A R410A R410A Coolant volume (prefilled) kg 1,45 1,6 3,4 3,4 GWP 2087,5 2087,5 2087,5 TCO2eq 3,03 3,3 7,1 7,1 Connection refrigerant line Gas lines " (mm) 5 / 8 (15,9) 5 / 8 (15,9) 5 / 8 (15,9) Liquid line " (mm) 1 / 4 (6,4) 3 / 8 (9,5) 3 / 8 (9,5) Refrigerant line length max. 2) m Refrigerant line length min. m * at 1 m separation 1) Only for devices heating and cooling 2) The pre-filled amount of refrigerant in the outdoor unit is sufficient for a maximum refrigerant line length of 10 m. 22

16 Outdoor unit Air-to-water heat pump, for LT wall mounted, integrated and compact indoor units Split air -to- water heat pumps up to 55 C flow Daikin Altherma low temperature outdoor unit 4 8 kw ( and cooling) Inverter split heat pump outdoor unit as an inverter-controlled compressor- / evaporator unit with extended modulation range. Located in a weatherproof galvanized sheet steel casing, primed, resin and powder coated. Integrated outdoor temperature sensor. Application range: to -25 C external temperature. Dimensions (W x D x H) 825 x 300 x 735 mm. Daikin Altherma LT 4 kw outdoor unit 1~230 V Daikin Altherma LT 6 kw outdoor unit 1~230 V Daikin Altherma LT 8 kw outdoor unit 1~230 V Daikin Altherma low temperature outdoor unit kw ( and cooling) Inverter split heat pump outdoor unit as an inverter-controlled compressor- / evaporator unit with extended modulation range. Located in a weatherproof galvanized sheet steel casing, primed, resin and powder coated. Integrated outdoor temperature sensor. Application range heating to -25 C external temperature. Dimensions (W x D x H) 900 x 320 x 1,345 mm. Daikin Altherma LT 11 kw outdoor unit 3~400 V Daikin Altherma LT 14 kw outdoor unit 3~400 V Daikin Altherma LT 16 kw outdoor unit 3~400 V Daikin Altherma LT 11 kw outdoor unit 1~230 V Daikin Altherma LT 14 kw outdoor unit 1~230 V Daikin Altherma LT 16 kw outdoor unit 1~230 V Type / Order Nr. ERLQ004CV3 ERLQ006CV3 ERLQ008CV3 ERLQ011CW1 ERLQ014CW1 ERLQ016CW1 ERLQ011CV3 ERLQ014CV3 ERLQ016CV3 Price HUF , , , , , , , , ,- Accessories Wall bracket Wall bracket for mounting the outdoor unit, including rubber buffer for noise de-coupling. Type Order No. Price HUF Wall bracket for 4 8 kw outdoor unit Wall bracket for kw outdoor unit Standing bracket Optional, for mounting the outdoor unit, Dimensions 4-8 kw (B x T x H) 62 x 30 x 30 cm, Weight 6,5 kg Dimensions kw (B x T x H) 66 x 40 x 30 cm, Weight 7,5 kg WKS 1 WKS , ,- Standing bracket for outdoor unit 4 8 kw Standing bracket for outdoor unit kw Mounting feet, for external units 4 8 kw, Height 10 cm recommended for socket and wall bracket mounting for use with WKS 1 SKS 4-8 SKS , ,- EKFT008CA EKFT008CA ,- Drain pan for 4 8 kw outdoor unit With central drain for collecting and removal of the melt water. Heater for drain pan trough for 4 8 kw outdoor unit Heater tape to install in central hole of drain pan to prevent ice blockage EKDP008C EKDP008C ,- EKDPH008C EKDPH008C ,- Article Coolant line copper tharmally insulated. The thermal insulation of the coolant line meets Euro Class E (fire behaviour / material class) in accordance with DIN EN Copper thermally insulated Copper thermally insulated Copper thermally insulated Copper thermally insulated Copper thermally insulated Copper thermally insulated 1 / 4" 1 / 4" 3 / 8" 3 / 8" 5 / 8" 5 / 8" 12 m 25 m 12 m 25 m 12 m 25 m Size VPE Order No. Price HUF , , , , , ,- 23

17 Air-to-water heat pump Daikin Altherma high temperature Split air -to- water heat pumps up to 80 C flow Daikin Altherma high temperature, indoor unit For outdoor unit 11, 14 and 16 kw () Equipped with speed-controlled heating circulation pump, expansion vessel, safety module with pressure gauge and safety valve, filling and evacuation valves and brass dirt trap. Including external control unit which can also be used as a room thermostat. Dimensions (W x D x H) 600 x 695 x 705 mm. Daikin Altherma HT 11 kw indoor unit 3~400V Daikin Altherma HT 14 kw indoor unit 3~400V Daikin Altherma HT 16 kw indoor unit 3~400V Daikin Altherma HT 11 kw indoor unit 1~230V Daikin Altherma HT 14 kw indoor unit 1~230V Daikin Altherma HT 16 kw indoor unit 1~230V Type / Order No. EKHBRD011ADY1 EKHBRD014ADY1 EKHBRD016ADY1 EKHBRD011ADV1 EKHBRD014ADV1 EKHBRD016ADV1 Price HUF , , , , , ,- Accessories Backup heater Altherma HT Supplementary heating Electric supplementary heating with 230/400 V-50 Hz / 6000 Watt for Altherma HT for wall-mounting. Comprises backup heater with flow monitor, bleeder valve, overcurrent protection and cable bushing. For connection to the Altherma HT you will need the communication board EKRP1AHT. 1-phase connection 3-phase connection Communication board Required for the connection of max. 2 additional room thermostats or max. 2 additional self-contained mixer units. Supplementary user interface Can be used as a second user interface (master/slave) besides the one delivered with the indoor unit Type Order No. Price HUF EKBUHA6V3 EKBUHA6V ,- EKBUHA6W1 EKBUHA6W ,- EKRP1AHT EKRP1AHT ,- EKRUAHTB EKRUAHTB ,- E-Pac HT switching unit Switching unit for mounting on the hygienic storage tank (300 / 500 l). Includes three-way switch valve, connection cable and storage tank sensor. Required for connecting the hygienic storage tank to the Altherma HT. EP HT 3H (for 300 l tank) EP HT 5H (for 500 l tank) Digital I/O PCB Communication unit for Altherma LT wall mounted, Altherma HT for several use cases eg. status and alarm signal. EP HT 3H EP HT 5H not relevant not relevant for commuication to SOLARIS order SOL-PAC LT/HT EKRP1HBA EKRP1HBA ,- Burner blocking contact connection cable For RPS2, RPS3, EPS3 M, RPS3 25 M. BSKK RTX 5.812,- 3-way switch valve 1" male Three-way swithc valve 1" male thread with motor drive 240 V, Switch time 6 seconds, including 2 m connection cable. 3-W SV ,- 24

18 Air-to-water heat pump, Daikin Altherma high temperature Accessories Hydraulic diverter DN 125 Consisting of DN125 round pipe sub-divided into four zones (using perforated separator discs, length approx mm), equipped with 8 x heating circuit connections 1" male thread, and a 1 x ½" sleeve and standing foot. Max. permissible operating pressure: 6 bar, max. permissible temperature: 110 C. Type Order No. Price HUF HWC not relevant Thermal insulation for hydraulic diverter Thermal insulation, consisting of 60 mm PUR foam in a galvanised sheet steel casing. Sludge and magnetite separator Compact sludge separator with drain cock and thermal insulation. Input G1-IG (union nut), outlet G1-lG. WHWC not relevant SAS not relevant Split air -to- water heat pumps up to 80 C flow Daikin Altherma high temp outdoor unit () Inverter split heat pump outdoor unit as an inverter-controlled compressor / condenser unit. Accommodated in a weatherproof, galvanized sheet steel housing, primed and synthetic resin and powder coated. Application for high temperatures up to 80 C without electrical heating. Operation of the appliance down to -25 C. Dimensions (W x D x H) 900 x 320 x 1,345 mm. Altherma HT 11 kw outdoor unit 3~400 V Altherma HT 14 kw outdoor unit 3~400 V Altherma HT 16 kw outdoor unit 3~400 V Altherma HT 11 kw outdoor unit 1~230 V Altherma HT 14 kw outdoor unit 1~230 V Altherma HT 16 kw outdoor unit 1~230 V Type /Order No. ERRQ011AY1 ERRQ014AY1 ERRQ016AY1 ERRQ011AV1 ERRQ014AV1 ERRQ016AV1 Price HUF , , , , , ,- Accessories air -to- water heat pumps up to 80 C flow Wall bracket Wall bracket for mounting the outdoor unit, including rubber buffer for noise de-coupling. Wall bracket external units kw. Standing bracket Optional, for mounting the outdoor unit, Dimensions kw (B x T x H) 66 x 40 x 30 cm, Weight 7,5 kg Type Order No. Price HUF WKS ,- Article Coolant line copper tharmally insulated. The thermal insulation of the coolant line meets Euro Class E (fire behaviour / material class) in accordance with DIN EN Copper thermally insulated Copper thermally insulated Copper thermally insulated Copper thermally insulated 3 / 8" 3 / 8" 5 / 8" 5 / 8" 12 m 25 m 12 m 25 m Size VPE Order No. Price HUF Standing bracket for outdoor unit kw SKS , , , , ,- 25

19 Technical data Air-to-water heat pump, Altherma high temperature Altherma HT outdoor unit ~3 / 400 V ~1 / 230 V 11 kw 14 kw 16 kw 11 kw 14 kw 16 kw ERRQ011AY1 ERRQ014AY1 ERRQ016AY1 ERRQ011AV1 ERRQ014AV1 ERRQ016AV1 Performance data Max. heat output A2 / W65 kw 9,6 11,9 13,5 9,6 11,9 13,5 Power consumption A2 / W65 kw 3,9 5 5,8 3,9 5 5,8 COP A2 / W65 2,48 2,38 2,33 2,48 2,38 2,33 Max. heat output A7 / W65 kw Power consumption A7 / W65 kw 3,6 4,7 5,6 3,6 4,7 5,6 COP A7 / W65 3,08 3 2,88 3,08 3 2,88 Dimensions Unit dimesnsions (W x D x H) 900 x 320 x 1345 Weight Mass Net kg 120 Mass Gross kg 130 Compressor Motor Type Fully hermetic scroll compressor Operating range applications C -25 to +20 Domestic hot water generation C -25 to +35 Flow max. C Flow min. C HW temperature min. C HW temperature max. C Sound level Sound pressure level* db (A) Sound power level db (A) Refrigerant Type R410A Coolant volume (prefilled) kg 4,5 GWP 2087,5 TCO2eq 9,4 Control Electronic expansion valve Max. line length m 50 Max. height difference m 30 Defrost method Process inversion Output control Inverter controlled Power supply Y1 V1 Phases 3~ 1~ Frequency Hz Voltage V Power consumption Maximum operating current A 13,5 13,5 13,5 23,8 23,8 23,8 Recommended fuses A Pump Nominal ESP kpa Pump Power input w Water side Nominal flow rate l / min * at 1m separation 26

20 Technical data Air-to-water heat pump, Altherma high temperature Altherma HT indoor unit ~3 / 400 V ~1 / 230 V 11 kw 14 kw 16 kw 11 kw 14 kw 16 kw EKHBRD011ADY1 EKHBRD014ADY1 EKHBRD016ADY1 EKHBRD011ADV1 EKHBRD014ADV1 EKHBRD016ADV1 Performance data Max. heat output A2 / W65 kw 9,6 11,9 13,5 9,6 11,9 13,5 Power consumption A2 / W65 kw COP A2 / W65 Max. heat output A7 / W65 kw Power consumption A7 / W65 kw COP A7 / W65 Dimensions Unit dimesnsions (W x D x H) 600 x 695 x 705 Weight Mass Net kg 147 Mass Gross kg 156 Compressor Motor Type Fully hermetic scroll compressor Operating range applications C -25 to +20 Domestic hot water generation C -25 to +35 Flow max. C 80 Flow min. C 25 HW temperature min. C 25 HW temperature max. C 75 Sound level Sound pressure level* db (A) Sound power level db (A) Refrigerant Type R134a Coolant volume (prefilled) kg 3,2 GWP 1430 TCO2eq 4,6 Control Electronic expansion valve Max. line length m Max. height difference m Defrost method Output control Inverter controlled Power supply Y1 V1 Phases 3~ 1~ Frequency Hz Voltage V Power consumption Maximum operating current A 12,5 12,5 12,5 22,5 23,8 23,8 Recommended fuses A Pump Nominal ESP kpa Pump Power input w Water side Nominal flow rate l / min 15,8 20,1 22,9 15,8 20,1 22,9 * at 1m separation 27

21 HP convector HP convector Blower convector for room heating and cooling with compact dimensions and very quiet operation. The convector can be used both for heating and cooling and is ideally suited for operation with a heat pump. It can be used both in combination with underfloor heating and a space-saving replacement for low-temperature radiators. The remote control with integrated temperature regulation facilitates problem-free and rapid adaption to various different requirements. The integrated air filter provides clean and pleasant room air. HP convector 1.5 kw HP convector 2.0 kw HPc connection package Thermally insulated flexible connecting line with fittings. Type Order No. Price HUF FWXV15A FWXV20A FWXV15A FWXV20A , ,- HPc-AP ,- HPc regulation package This is required if the HPc is not connected via a heating circuit distributor. Includes electrical 2-way valve, section regulation valve and connecting fittings. HPc-RP ,- HPc connecting cable Cable for extension of the output signals of the LT compact for connection of a HPc with cooling and heating function or actuation of an external valve for bypassing the heating support exchanger. HPc-VK ,- Technical data HP convector HP convector FWXV15A FWXV20A Performance data output kw 1,5 2 Cooling capacity kw 1,2 1,7 Application range Water temperature min. C 6 / 18* 6 / 18* Water temperature max. C Dimensions (W x D x H) mm 700 x 210 x x 210 x 600 Weight kg Noise level Noise level (mid-range ventilation)* db (A) Power supply Phases 1-1- Frequency Hz 50 / / 60 Voltage V * In combination with underfloor heating (connected in the same circuit). 28

22 Thermal store and solar storage tank Daikin Hygienic storage tank EKHWP300PB EKHWP500PB EKHWP300B EKHWP500B Hygienic hot water generation in instantaneous through-flow principle Solar heating support 1) Electric immersion heater Heat pump combinations Altherma LT wall mounted up to 8 kw Altherma LT wall mounted up to 16 kw Altherma HT Altherma hybrid Solar combination Pressurised solar combination Drain-Back combination 1) support not in combination with Altherma hybrid. EKHWP300PB High-performance 300 litre energy store for domestic hot water generation. Dimensions (W x D x H) 595 x 615 x 1646 mm, weight 58 kg Type Order No. Price HUF EKHWP300PB EKHWP300PB ,- EKHWP500PB High-performance 500 litre stratified storage tank for hot water generation and heating support*. Dimensions (W x D x H) 790 x 790 x 1,658 mm, weight 89 kg EKHWP500PB EKHWP500PB ,- EKHWP300B High-performance 300 litre energy store for hot water generation. Dimensions (W x D x H) 595 x 615 x 1,646 mm, weight 58 kg. EKHWP300B EKHWP300B ,- EKHWP500B High-performance 500 litre stratified storage tank for hot water generation and heating support*. Dimensions (W x D x H) 790 x 790 x 1658 mm, weight 82 kg. EKHWP500B EKHWP500B ,- 29

23 Thermal store and solar storage tank Article Type Order No. Price HUF Stainless steel hot water storage tank For combination with Altherma HT indoor unit or Altherma LT wall mounted (from Version BB of indoor unit onwards). WithAltherma HT Mounting on the indoor unit is possible. With individual installation next to the indoor unit you will need the mounting unit EKFMAHTB for the Altherma HT. With a capacity of 200 litres Dimensions (W x D x H) 600 x 695 x 1,335 mm, weight 70 kg. With a capacity of 260 litres Dimensions (W x D x H) 600 x 695 x 1,610 mm, weight 78 kg. EKHTS200AC EKHTS260AC EKHTS200AC EKHTS260AC , ,- Hot water storage tank installation kit For individual installation of the stainless steel hot water storage tank EKHTS200AC and EKHTS260AC next to the Altherma HT indoor unit. Hot water storage tank sensors, LowTemp To measure the water temperature in the storage tank. Needed for storage tank EKHWE300A3V3 for the automatic control at the heat pump device. Cable length: 12 metres. EKFMAHTB EKFMAHTB ,- SF LT ,- Domestic Hot Water Tank Sets for Daikin Altherma LT wall mounted (consists of tank, booster heater, contactor/fuse assembly for BH, tanksensor + 12 m connection wire, 3 Way Valve + motor) Type Order No. Price HUF Stainless Steel Domestic Hot Water Tank 150 l EKHWS150B3V ,- incl. 3 kw booster heater 1 ~ 230 V, height 900 mm, diameter 580 mm, weight 37 kg Wallbracket for 150 l stainless steel tank EKWBSWW ,- Stainless Steel Domestic Hot Water Tank 200 l incl. 3 kw booster heater 1 ~ 230 V, height 1150 mm, diameter 580mm, weight 45kg Stainless Steel Domestic Hot Water Tank 200 l incl. 3 kw booster heater 2 ~ 400 V, height 1150 mm, diameter 580 mm, weight 45 kg Stainless Steel Domestic Hot Water Tank 300 l incl. 3 kw booster heater 1 ~ 230 V, height 1600 mm, diameter 580 mm, weight 59 kg Stainless Steel Domestic Hot Water Tank 300 l incl. 3 kw booster heater 2 ~ 400 V, height 1600 mm, diameter 580 mm, weight 59 kg Enameled Domestic Hot Water Tank 150 l incl. 3 kw booster heater 1 ~ 230 V, height 1205 mm, diameter 545 mm, weight 80 kg Enameled Domestic Hot Water Tank 150 l (wallmounted) incl. 3 kw booster heater 1 ~ 230 V, height 1205 mm, diameter 545 mm, weight 82 kg Enameled Domestic Hot Water Tank 200 l incl. 3 kw booster heater 1 ~ 230 V, height 1580 mm, diameter 545 mm, weight 104 kg Enameled Domestic Hot Water Tank 200 l incl. 3 kw booster heater 2 ~ 400 V, height 1580 mm, diameter 545 mm, weight 104 kg Enameled Domestic Hot Water Tank 300 l incl. 3 kw booster heater 1 ~ 230 V, height 1572 mm, diameter 660 mm, weight 140 kg Enameled Domestic Hot Water Tank 300 l incl. 3 kw booster heater 2 ~ 400 V, height 1572 mm, diameter 660 mm, weight 140 kg EKHWS200B3V ,- EKHWS200B3Z ,- EKHWS300B3V ,- EKHWS300B3Z ,- EKHWE150A3V ,- EKHWET150A3V ,- EKHWE200A3V ,- EKHWE200A3Z ,- EKHWE300A3V ,- EKHWE300A3Z ,- 30

24 Technical data Thermal store and solar storage tank Domestic hot water tank EKHWP-B Plastic domestic hot water tank with solar support Tank designed for connection with thermal solar collectors (Drain-Back). Available in 300 and 500 liters Large hot water storage tank to provide domestic hot water at any time Heat loss is reduced to a minimum thanks to the high quality insulation Space heating support possible (500l tank only) EKHWP300B EKHWP500B Accessory EKHWP 300B 500B Casing Colour Traffic white (RAL9016) / Dark grey (RAL7011) Material Impact resistant polypropylene Dimensions Unit Width mm Depth mm Weight Unit Empty kg Tank Water volume l Material Polypropylen Maximum water temperature C 85 Insulation Heat loss kwh/24h Energy efficiency class B Standing heat loss W Storage volume l Heat exchanger Domestic hot water Quantity 1 Tube material Stainless steel (DIN ) Surface m² Internal coil volume l Operating pressure bar 6 Average specifc thermal output W/K 2,790 2,825 Charging Quantity 1 Tube material Stainless steel (DIN ) Surface m² 3 4 Internal coil volume l Operating pressure bar 3 Average specifc thermal output W/K 1,300 1,800 Auxiliary solar heating Tube material - Stainless steel (DIN ) Surface m² - 1 Internal coil volume l - 2 Operating pressure bar - 3 Average specifc thermal output W/K Domestic hot water tank EKHWP-PB Pressureless domestic hot water tank with solar support Tank designed for connection with pressurised thermal solar system (pressurised). Available in 300 and 500 liters Large hot water storage tank to provide domestic hot water at any time Heat loss is reduced to a minimum thanks to the high quality insulation Space heating support possible (500l tank only) EKHWP300PB EKHWP500PB Accessory EKHWP 300PB 500PB Casing Colour Traffic white (RAL9016) / Dark grey (RAL7011) Material Impact resistant polypropylene Dimensions Unit Width mm Depth mm Weight Unit Empty kg Tank Water volume l Material Polypropylen Maximum water temperature C 85 Insulation Heat loss kwh/24h Energy efficiency class B Standing heat loss W Storage volume l Heat exchanger Domestic hot water Quantity 1 Tube material Stainless steel (DIN ) Surface m² Internal coil volume l Operating pressure bar 6 Average specifc thermal output W/K 2,790 2,825 Charging Quantity 1 Tube material Stainless steel (DIN ) Surface m² 3 4 Internal coil volume l Operating pressure bar 3 Average specifc thermal output W/K 1,300 1,800 Auxiliary solar heating Tube material - Stainless steel (DIN ) Surface m² - 1 Internal coil volume l - 2 Operating pressure bar - 3 Average specifc thermal output W/K

25 EKHTS-AC Domestic hot water tank Stackable stainless steel domestic hot water tank Stainless steel domestic hot water tank The indoor unit and domestic hot water tank can be stacked to save space, or installed next to each other, if only limited height is available Available in 200 and 260 liters Heat loss is reduced to a minimum thanks to the high quality insulation EKHTS200AC EKHTS260AC Accessory EKHTS 200AC 260AC Casing Colour Metallic grey Material Galvanised steel (precoated sheet metal) Dimensions Unit Height Integrated on mm indoor unit 2,010 2,285 Width mm 600 Depth mm 695 Weight Unit Empty kg Tank Water volume l Material Stainless steel (EN ) Maximum water temperature C 75 Insulation Heat loss kwh/24h Energy efficiency class B Standing heat loss W Storage volume l Heat exchanger Quantity 1 Tube material Duplex steel (EN ) Face area m² Internal coil volume l

26 Technical data Thermal store and solar storage tank Domestic hot water tank EKHWE-A3V3/Z2 Enameled domestic hot water tank Enameled domestic hot water tank Available in 150, 200 and 300 liters EKHWE-A3V3/Z2 Accessory EKHWE 150A3V3 200A3V3 300A3V3 200A3Z2 300A3Z2 Casing Colour RAL9010 Material Epoxy coated steel Dimensions Unit Diameter mm Weight Unit Empty kg Tank Water volume l Material Enamel coated steel acc. DIN4753TL2 Maximum water temperature C 75 Insulation Heat loss kwh/24h Energy efficiency class C D C D Standing heat loss W Storage volume l Heat exchanger Quantity 1 Booster heater Capacity kw 3 Power supply Phase/Frequency/Voltage Hz/V 1~/50/230 2~/50/400 Domestic hot water tank EKHWS-B3V3/Z2 Stainless steel domestic hot water tank Stainless steel domestic hot water tank Available in 150, 200 and 300 liters EKHWS-B3V3/Z2 Accessory EKHWS 150B3V3 200B3V3 300B3V3 200B3Z2 300B3Z2 Casing Colour Neutral white Material Epoxy-coated mild steel Dimensions Unit Width mm 580 Depth mm 580 Weight Unit Empty kg Tank Water volume l Material Stainless steel (DIN ) Maximum water temperature C 85 Insulation Heat loss kwh/24h Energy efficiency class C Standing heat loss W Storage volume l Heat exchanger Quantity 1 Tube material Duplex steel LDX 2101 Booster heater Capacity kw 3 Power supply Phase/Frequency/Voltage Hz/V 1~/50/230 2~/50/400 33

27 Ground source heat pump Daikin Altherma ground source heat pump Ground source heat pump up to 65 C flow Plug & Play Inverter ground source with integrated 180 Litre stainless steel domstic hot water tank. Hydraulically equipped with high-efficiency pump, safety module safety valve, flow monitor, expansion vessel, water filter and pressure gauge for space heating and brine circuit. Electrical equipment with load contactors for integrated 9 kw auxiliary electrical heater and circulating pump. Dimensions (W x D x H) 600 x 728 x 1732 mm. ground source HP 10 kw 3~400V Type Order-No. Price HUF EGSQH10S18A9W EGSQH10S18A9W ,- Accessories user interface as remote control of the hybrid gas heat pump including room thermostat function. A maximum of 2 control and display units are used. Languages: German, French, Italian, Dutch Languages: English, Swedish, Norwegian, Finnish Languages: English, Spanish, Greek, Potuguese Languages: English, Turkish, Polish, Romanian Languages: German, Czech, Slovenian, Slovak Languages: English, Croatian, Hungarian, Bulgarian Languages: English, German, Russian, Danish Brine Filling Kit Kit to fill the brine circuit Option 1: Cabled room thermostat Type Order No. Price HUF EKRUCBL1 EKRUCBL2 EKRUCBL3 EKRUCBL4 EKRUCBL5 EKRUCBL6 EKRUCBL7 EKRUCBL1 EKRUCBL2 EKRUCBL3 EKRUCBL4 EKRUCBL5 EKRUCBL6 EKRUCBL , , , , , , ,- EKRTWA EKRTWA KGSFILL KGSFILL , ,- Option 2: Wireless room thermostat EKRTR EKRTR ,- Additional board, Digital I/O PCB for signaling operating states and fault indication EKRP1HBA EKRP1HBA ,- Communication board Power consumption limitation with 4 digital inputs on hydrobox. Reqired for the connection of max. 2 additional room thermostats (EKRTRW) or max. 2 additional self-contained mixer units. Interface cable for configuration of the heat pump controller Via PC, for LT wall mounted, LT ground source and Altherma hybrid Overflow valve Overflow valve DN 20 with fitting with angle body. Necessary component of an Altherma LT heat pump system excluding LT compact, in order to the minimum flow rate on the indoor unit. EKRP1AHT EKRP1AHT ,- EKPCCAB3 EKPCCAB ,- UESV ,- Sludge and magnetite separator Compact sludge separator with drain cock and thermal insulation. Input G1-IG (union nut), outlet G1-lG SAS not relevant 34

28 Technical data Ground source heat pump Basic data Daikin ground source HP EGSQH10S18A9W Nominal heat output B0/W35 kw 10,2 Nominal COPB0/W35 4,35 Max. heat output B0/W35 kw 13 Min. heat output B0/W35 kw 3,11 Dimesnsions (B x T x H) mm 600 x 728 x 1732 Weight kg 210 Operating range flow temperature (with BH) C Min: 24 / Max: 60 (65) Domestic hot water generation (with BH) C Min: 25 / Max: 55 (60) Sound power level db(a) 46 Sound pressure level db(a) 32 Power supply phase ~3 Power supply frequency Hz 50 Power supply voltage V 400 Inrush current A 4,8 Operating current (maximum) A 20,4 Refrigerant Coolant volume (prefilled) kg 1,8 GWP 2087,5 TCO2eq 3,8 Backup Heater Heat output (normal operation) kw 6 Heat output (emergency operation ) kw 9 Steps - 2 Power supply voltage V 400 Power supply Frequency Hz 50 Operating current (maximal) A 13 Storage tank data Total storage capacity Liters 180 Max. permissible storage water temperature C 60 Heat consumption at readiness and EN kwh / 24h 1,36 Material of domestic hot water tank Drinking water heating R410A stainless steel Drinking water capacity Liters 171 Maximum operating pressure bar 10 Storage tank charging / discharging heat exchanger Water capacity heat exchanger Liters 8,9 Surface of charging heat exchanger m² 1,9 Thermal output data Hot water volume without reheating at 8 l / min / 12 l / min draw-off rate (TKW = 10 C / TWW = 40 C / TSP = 50 C)* Hot water volume without reheating with 8 l / min / 12 l / min draw-off rate (TKW = 10 C / TWW = 40 C / TSP = 60 C)* Reheating time draw-off volume 140 l -> 5820 Wh (bath draw off) Pipe connections Liters 210 Liters 260 Min. 35 Cold and hot water mm 22 inflow and return flow mm 22 Brine inflow and return flow mm 28 35

29 Hybrid heat pump Daikin Altherma hybrid heat pump Hybrid heat pump Daikin hybrid heat pump indoor unit for outdoor unit 5-8 kw. () Hybrid inddor unit heating for combination with Altherma hybrid gas condensing unit. Hydraulically equipped with high-efficiency pump, Diaphragm expansion vessel, safety module with safety valve, flow monitor, dirt trap. Dimensions (W x D x H*) 450 x 164 x 902 mm. * Total height with automatic air bleeder and connecting lines: 1075 mm User Interface is not included, EKRUCBL* is mandatory for system operation. Please order it additionally according to your needed languages. Please order the cover plate accessory optional. hybrid 5 kw heat pump indoor unit (heating) 1~230 V hybrid 8 kw heat pump indoor unit (heating) 1~230 V Daikin hybrid heat pump indoor unit for outdoor unit 5-8 kw. (/Cooling) Hybrid inddor unit heating/cooling for combination with Altherma hybrid gas condensing unit. Hydraulically equipped with high-efficiency pump, Diaphragm expansion vessel, safety module with safety valve, flow monitor, dirt trap, condensate pan and supplementary user interface EKRUCBL. Dimensions (W x D x H*) 450 x 164 x 902 mm. * Total height with automatic air bleeder and connecting lines: 1075 mm User Interface is not included, EKRUCBL* is mandatory for system operation. Please order it additionally according to your needed languages. Please order drain pan kit for indoor units additionally and the cover plate accessory optional. Type / Order No. EHYHBH05AV32 EHYHBH08AV32 Price HUF hybrid 8 kw heat pump indoor unit (/Cooling) 1~230 V EHYHBX08AV ,- Daikin hybrid gas condensing unit 32 kw for Daikin hybrid heat pump indoor unit Gas combi condensing boiler with a special 2-in-1 heat exchanger for heating and domestic hot water in hygienic continuous flow principle, for natural gas and LPG*, incl. cover, plumbing connections. Dimensions without cover (B x T x H) 450 x 240 x 710 mm *For LPG conversion kit EKHY necessary hybrid Gas condensing unit 8,2-26,6 kw (80 / 60 C) (Please check with local sales staff the specific country compliance) hybrid Gas condensing unit 8,2-26,6 kw (80 / 60 C) (Please check with local sales staff the specific country compliance) EHYKOMB33AA2 EHYKOMB33AA3 not relevant , , ,- Accessories user interface as remote control of the hybrid gas heat pump including room thermostat function. A maximum of 2 control and display units are used. Languages: German, French, Italian, Dutch Languages: English, Swedish, Norwegian, Finnish Languages: English, Spanish, Greek, Potuguese Languages: English, Turkish, Polish, Romanian Languages: German, Czech, Slovenian, Slovak Languages: English, Croatian, Hungarian, Bulgarian Languages: English, German, Russian, Danish Type Order No. Price HUF EKRUCBL1 EKRUCBL2 EKRUCBL3 EKRUCBL4 EKRUCBL5 EKRUCBL6 EKRUCBL7 EKRUCBL1 EKRUCBL2 EKRUCBL3 EKRUCBL4 EKRUCBL5 EKRUCBL6 EKRUCBL , , , , , , ,- LPG conversion kit EKHY EKHY ,- 36

30 Hybrid heat pump Accessories Double-walled test adapter, reducing DN 60/100 to DN 80/125 Alternative to Please note: When using Set GW 1 or Set GW 2 a double-walled reduction piece from DN 80 / 125 to DN 60 / 100, Sleeve DN 80 / 125 is included. 3-way switch valve 1" male 3-way switch valve 1" male thread with motor drive 240 V, switching time 6 sec. including connection cable 2 m. Interface cable for configuration of the heat pump controller Via PC, for LT wall mounted, Altherma ground source and Altherma hybrid Type Order No. Price HUF EKHY EKHY ,- 3-W SV ,- EKPCCAB3 EKPCCAB ,- Decentalised outdoor temperature sensor EKRSC1 EKRSC ,- Overflow valve Overflow valve DN 20 with fitting with angle body. Necessary component of an LT heat pump system excluding LT compact, in order to the minimum flow rate on the indoor unit. UESV ,- Note: Please check before ordering if Daikin Altherma hybrid is available in your country. Accessories Sludge and magnetite separator Compact sludge separator with drain cock and thermal insulation. Input G1-IG (union nut), outlet G1-lG. Type Order No. Price HUF SAS not relevant Storage tank sensor for Altherma hybrid SF Hybrid ,- Digital I/O PCB Communication unit for Altherma LT wall mounted, Altherma HT for several use cases eg. status and alarm signal. for commuication to SOLARIS order SOL-PAC LT/HT EKRP1HBA EKRP1HBA ,- Burner blocking contact connection cable For RPS2, RPS3, RPS3 M, RPS3 25 M. BSKK RTX 5.812,- Hybrid heat pump Daikin Altherma hybrid outdoor unit 5-8 kw (heating and cooling) Inverter split heat pump outdoor unit as an inverter-controlled compressor- / evaporator unit with extended modulation range. Located in a weatherproof galvanized sheet steel casing, primed, resin and powder coated. Integrated outdoor temperature sensor. Application range: to -25 C external temperature. Dimensions (W x D x H) 825 x 300 x 735 mm. Type Order No. Price HUF Daikin Altherma hybrid 5 kw outdoor unit 1~230V Daikin Altherma hybrid 8 kw outdoor unit 1~230V EVLQ05CV3 EVLQ08CV3 EVLQ05CV3 EVLQ08CV , ,- 37

31 Hybrid heat pump Accessories Wall bracket Wall bracket for mounting the outdoor unit, including rubber buffer for noise de-coupling. Type Order No. Price HUF Wall bracket for 4 8 kw outdoor unit WKS ,- Standing bracket Optional, for mounting the outdoor unit, Dimensions 4-8 kw (B x T x H) 62 x 30 x 30 cm, Weight 6,5 kg Dimensions kw (B x T x H) 66 x 40 x 30 cm, Weight 7,5 kg Standing bracket for outdoor unit 4 8 kw SKS ,- Mounting feet, for external units 4 8 kw, Height 10 cm recommended for socket and wall bracket mounting for use with WKS 1 EKFT008CA EKFT008CA ,- Drain pan for 4 8 kw outdoor unit With central drain for collecting and removal of the melt water. EKDP008C EKDP008C ,- Coolant line copper tharmally insulated. The thermal insulation of the coolant line meets Euro Class E (fire behaviour / material class) in accordance with DIN EN Copper thermally insulated Copper thermally insulated Copper thermally insulated Copper thermally insulated 1 / 4" 1 / 4" 5 / 8" 5 / 8" 12 m 25 m 12 m 25 m Size VPE Order No. Price HUF Heater for drain pan trough for 4 8 kw outdoor unit EKDPH008C EKDPH008C , , , , ,- Cover plate Cover plate to hide the pipe connections underneath the unit Valve kit Valves for space heating, domestic hot water an gas connection Mounting jig Jig to help mount the indoor unit onto the wall Drain pan kit for indoor unit Collect and drain condensate during cooling operation Type Order No. Price HUF EKHY EKHY ,- EKVK1A EKVK1A ,- EKHYMNT1A EKHYMNT1A ,- EKHYDP EKHYDP ,- Possible combinations Hybrid operating mode 5 kw 8 kw 8 kw / Cooling Combination Outdoor unit Heat pump indoor unit Gas condensing unit (Please note country compliance) Outdoor unit Heat pump indoor unit Gas condensing unit (Please note country compliance) Outdoor unit Heat pump indoor unit Gas condensing unit (Please note country compliance) Type / Order No. EVLQ05CV3 EHYHBH05AV32 EHYKOMB33AA2 EHYKOMB33AA3 EVLQ08CV3 EHYHBH08AV32 EHYKOMB33AA2 EHYKOMB33AA3 EVLQ08CV3 EHYHBX08AV3 EHYKOMB33AA2 EHYKOMB33AA3 38

32 Hybrid heat pump Technical data Hybrid heat pump indoor unit 5 kw 8 kw Hybrid heat pump inddor unit / Cooling EHYHBH05AV32 EHYHBH08AV32 EHYHBX08AV3 Basic data Color white Dimensions (W x D x H*) mm 450 x 164 x 902 Weight kg 30 / 32 Operating range flow temperature (heating, heat pump only) C Min: 25 / Max: 55 Min: 15 / Max: 55 Operating range flow temperature (Cooling) C - - Min: 5 / Max: 22 Connection refrigerant line Gas lines " (mm) 5/8 (15,9) 5/8 (15,9) Liquid line " (mm) 1/4 (6,4) 1/4 (6,4) * Total height with automatic air bleeder and connecting lines: 1075 mm Technical data hybrid gas condensing unit Basic data hybrid gas condensing unit EHYKOMB33A2/EHYKOMB33A3 Weight kg 36 Dimensions (W x D x H) mm 450 x 240 x 710 Heat generator data Nominal output (80/60 C) kw 8,2-26,6 Rated thermal load1) kw 7,6-27,0 Device type C13 / C33 / C43 / C53 / C63 / C83 Electrical data V/Hz 230 / 50 Protection type IP 44 Maximum permissible operating pressure bar 3 Operating temperature C Maximum boiler efficiency % 107 Flue gas / air infeed connection diameter mm DN 60 / 100 (with connecting kit No DN 80 / 125) 1) For maximum performance of the gas-condensing boiler please note the maximum pump discharge head. 39

33 Hybrid heat pump Technical data Altherma hybrid heat pump outdoor unit ~1/230 V Altherma hybrid outdoor unit 5 kw 8 kw EVLQ05CV3 EVLQ08CV3 Basic data Nominal heat output A-7 / W35 kw 4,37 5,46 Nominal heat output A2/W35 kw 3,27 5,8 Nominal heat output A7/W35 kw 4,4 7,4 Nominal COP A-7/W35 2,81 2,71 Nominal COP A2/W35 4,02 3,53 Nominal COP A7/W35 5,04 4,45 Nenn-EER A35/W35 3,42 Max. heat output A-7/W35 kw 4,6 6,4 Max. heat output A2/W35 kw 4,8 7,7 Max. heat output A7/W35 kw 5,1 10,2 Max. cooling output A35/W18 kw 5,9 8,43 Max. cooling output A35/W7 kw 4,5 6,35 Dimensions (B x T x H) mm 832 x 307 x 735 Weight kg Operating range outdoor temperature () C Min: -25 / Max: 25 Operating range outdoor temperature (Cooling) C Min: 10 / Max: 43 Sound pressure level (heating) * db (A) Sound pressure level (cooling)* db (A) - 50 Sound power level (heating) db (A) Sound power level (cooling) db (A) - 63 Power supply, phase 1 ~ Power supply Frequency Hz 50 Power supply Voltage V 230 Inrush current A 18 Operating current (maximum) A 18 Refrigerant R410a Coolant volume (prefilled) kg 1,45 1,6 GWP 2087,5 TCO2eq 3,03 3,3 Connection refrigerant line Gas lines " (mm) 5/8 (15,9) Liquid line " (mm) 1/4 (6,4) Refrigerant line length max. 1) m 20 Refrigerant line length min. m 3 * at 1 m separation 1) The pre-filled amount of refrigerant in the outdoor unit is sufficient for a maximum refrigerant line length of 10 m. 40

34 Air-to-water heat pump Daikin Altherma monobloc Split air -to- water heat pumps up to 55 C flow Daikin Altherma monobloc Type Order No. Price HUF and cooling monobloc 11 kw 3~400 V monobloc 14 kw 3~400 V monobloc 16 kw 3~400 V EBLQ011BB6W1 EBLQ014BB6W1 EBLQ016BB6W1 EBLQ011BB6W1 EBLQ014BB6W1 EBLQ016BB6W , , ,- monobloc 11 kw 1~230 V monobloc 14 kw 1~230 V monobloc 16 kw 1~230 V EBLQ011BB6V3 EBLQ014BB6V3 EBLQ016BB6V3 EBLQ011BB6V3 EBLQ014BB6V3 EBLQ016BB6V , , ,- monobloc 5 kw 1~230 V monobloc 7 kw 1 ~230 V EBLQ05CV3 EBLQ07CV3 EBLQ05CV3 EBLQ07 CV , ,- monobloc 11 kw 3~400 V monobloc 14 kw 3~400 V monobloc 16 kw 3~400 V EDLQ011BB6W1 EDLQ014BB6W1 EDLQ016BB6W1 EDLQ011BB6W1 EDLQ014BB6W1 EDLQ016BB6W , , ,- monobloc 11 kw 1~230 V monobloc 14 kw 1~230 V monobloc 16 kw 1~230 V EDLQ011BB6V3 EDLQ014BB6V3 EDLQ016BB6V3 EDLQ011BB6V3 EDLQ014BB6V3 EDLQ016BB6V , , ,- monobloc 5 kw 1~230 V monobloc 7 kw 1 ~230 V EDLQ05CV3 EDLQ07CV3 EDLQ05CV3 EDLQ07 CV , ,- Accessories Option 1: Cabled room thermostat Type Order No. Price HUF EKRTWA EKRTWA ,- Option 2: Wireless room thermostat EKRTR EKRTR ,- Screed temperature sensor EKRTETS EKRTETS 5.166,- 41

35 Daikin Altherma monobloc Accessories E-Pac LT switching unit Switching unit for mounting on the hygienic storage tank (300 l, 500 l). Includes three-way switching valve, connection cable and storage tank sensor. Required for connecting the hygienic storage tank to the LT. Please order the immersion heater separately if you want additional heating output. Type Order No. Price HUF EP LT 3H (for 300 L tank, LT heating/heating and cooling) EP LT 5X (for 500 L tank, LT heating and cooling) SOL-PAC LT/HT Communication unit between the LT wall mounted/ LT monobloc / HT and ROTEX Solaris. Consisting of connecting cable and circuit board. DVCPLT3H / X DVCPLT5X not relevant not relevant Supplementary package SOLARIS Sol-Pac Connection cable for burner blocking contact for RPS2, RPS3, RPS3 M, RPS3 25 M Return flow temperature limitation Thermal return flow temperature limitation to max 55 C. Component required for connecting a solar system to the LT. Choice depends on pipework design and flow rates. RLB 300 with 1 male thread and Kvs 3.2 (only 5 7 kw LT) RLB 500 with 1 1 / 4 male thread and Kvs 9 (11 16 kw LT) 3-way switch valve 1 male Three-way swithc valve 1" male thread with motor drive 240 V, Switch time 6 seconds, including 2 m connection cable. Overflow valve Overflow valve DN 25 with screw fitting in angle body. Necessary component of an heat pump system excluding LT compact, in order to the minimum flow rate on the indoor unit. SOL-PAC LT/HT not relevant RLB 300 RLB BSKK RTX 5.812, , ,- 3-W SV ,- UESV ,- Hydraulic diverter DN 125 Consisting of DN125 round pipe sub-divided into four zones (using perforated separator discs, length approx mm), equipped with 8 x heating circuit connections 1 male thread, and a 1 x ½ sleeve and standing foot. Max. permissible operating pressure: 6 bar, max. permissible temperature: 110 C. Thermal insulation for hydraulic diverter Thermal insulation, consisting of 60 mm PUR foam in a sheet steel casing. Sludge and magnetite separator Compact sludge separator with drain cock and thermal insulation. Input G1-IG (union nut), outlet G1-lG. HWC not relevant WHWC not relevant SAS not relevant Accessories Altherma LT monobloc 5-7 kw Type Order No. Price HUF Outdoor unit guard K.CG750S K.CG750S ,- Base panel to cover bottom of guard if mounted at high level K.CG750FPS K.CG750FPS ,- Part guard to cover exposed side coil K.CGSIDE K.CGSIDE ,- Base plate for K.CG750S K.CG750BPML K.CG750BPML ,- Fixings for steel drip tray to flexi feet K.DTFB K.DTFB ,- Flexi foot narrow K.FF600ASN K.FF600ASN ,- Flexi foot standard K.FF600S K.FF600S ,- Through wall insulation sleeve kit K.SLEEVE K.SLEEVE ,- Flexible hose 750mm K.HOSE750 K.HOSE ,- Flexible hose 500mm K.HOSE500 K.HOSE ,- Flexible hose 750mm with elbow K.HOSE750EL K.HOSE750EL ,- Wall brackets (250kg, 660mm long) K.CWBXL K.CWBXL ,- Stainless steel wall brackets (250kg, 660mm long) K.CWBXLSS K.CWBXLSS ,- Condensate drip tray to use with K.CWBXL K.DT2 K.DT ,- By pass kit option necessary for BUH in combination with H/C unit and use of fan coils when the BUH is located in humid room EKMBHBP1 EKMBHBP ,- 42

36 Technical data air-to-water heat pump Daikin Altherma low temperature monobloc Small capacity air to water monobloc system, ideal when indoor space is limited Compact monobloc for space heating and cooling with optional domestic hot water Fuss-free installation : only water connections required Reliable operation even when -25 C outside thanks to frost protection features such as free hanging coil COP up to 5 with typical annual efficiencies up to 300% E(D/B)LQ-CV3 Single Unit EDLQ/EBLQ 05CV3 07CV3 05CV3 07CV3 capacity Nom. kw 4.40 (1) / 4.03 (2) 7.00 (1) / 6.90 (2) 4.40 (1) / 4.03 (2) 7.00 (1) / 6.90 (2) Cooling capacity Nom. kw (1) / 4.17 (2) 5.20 (1) / 5.36 (2) Power input Cooling Nom. kw (1) / 1.80 (2) 1.37 (1) / 2.34 (2) Nom. kw (1) / 1.13 (2) 1.55 (1) / 2.02 (2) (1) / 1.13 (2) 1.55 (1) / 2.02 (2) COP 5.00 (1) / 3.58 (2) 4.52 (1) / 3.42 (2) 5.00 (1) / 3.58 (2) 4.52 (1) / 3.42 (2) EER (1) / 2.32 (2) 3.80 (1) / 2.29 (2) Dimensions Unit Height mm 735 Width mm 1,090 Depth mm 350 Weight Unit kg Operation range Ambient Min.~Max. CDB -25.0~25.0 Water side Min.~Max. C 15~55.0 Cooling Ambient Min.~Max. CDB -~- 10.0~43.0 Water side Min.~Max. C -~- 5.0~22.0 Domestic hot Ambient Min.~Max. CDB -25.0~35.0 water Water side Min.~Max. C 25~80 Refrigerant Type R-410A GWP 2,087.5 Charge kg TCO2eq Control Expansion valve (electronic type) Sound power level Nom. db(a) 61 Cooling Nom. db(a) - 62 Sound pressure Nom. db(a) 50 level Cooling Nom. db(a) - 50 Space heating Average climate water outlet 55 C Average climate water outlet 35 C General General ηs (Seasonal space heating efficiency) % SCOP Seasonal space heating eff. class A++ ηs (Seasonal % space heating efficiency) SCOP Seasonal space heating eff. class A++ (1) cooling Ta 35 C - LWE 18 C (DT = 5 C); heating Ta DB/WB 7 C/6 C - LWC 35 C (DT = 5 C) (2) cooling Ta 35 C - LWE 7 C ( DT = 5 C); heating Ta DB/WB 7 C/6 C - LWC 45 C ( DT = 5 C ) (3) Contains fluorinated greenhouse gases Wiring centre EKCB07CV3 EK2CB07CV3 Dimensions Unit Height mm 360 Width mm 340 Depth mm 97 Weight Unit kg 4 Operation range Ambient Min.~Max. - Indoor Ambient Min. CDB 5 installation Max. CDB 35 Refrigerant Charge/ Control/ GWP TCO2eq - Back-up heater kit EKMBUHC3V3 EKMBUHC9W1 Dimensions Unit Height mm 560 Width mm 250 Depth mm 210 Weight Unit kg Operation range Ambient Min.~Max. - Indoor Ambient Min. CDB 5 installation Max. CDB 30 Refrigerant Charge/ Control/ GWP TCO2eq - 43

37 Technical data air-to-water heat pump Daikin Altherma low temperature monobloc Reversible air to water monobloc system, ideal when indoor space is limited Energy efficient heating and cooling system based on air to water heat pump technology Low energy bills and low CO 2 emissions H 2 O piping between outdoor unit and indoor heat emitters Inverter controlled scroll compressor Built-in electric back-up heater as additional heating during extremely cold outdoor temperature Outdoor unit extracts heat from the outdoor air, even at -20 C EBLQ-BB Single Unit EBLQ 011BB6V3 014BB6V3 016BB6V3 011BB6W1 014BB6W1 016BB6W1 capacity Nom. kw (1) / (2) (1) / (2) (1) / (2) (1) / (2) (1) / (2) (1) / (2) Cooling capacity Nom. kw 12.9 (1) / 10.0 (2) 16.0 (1) / 12.5 (2) 16.7 (1) / 13.1 (2) 12.9 (1) / 10.0 (2) 16.0 (1) / 12.5 (2) 16.7 (1) / 13.1 (2) Power input Cooling Nom. kw 3.87 (1) / 3.69 (2) 5.75 (1) / 5.39 (2) 6.36 (1) / 5.93 (2) 3.87 (1) / 3.69 (2) 5.40 (1) / 5.06 (2) 6.15 (1) / 5.75 (2) Nom. kw 2.56 (1) / 3.31 (2) 3.29 (1) / 4.01 (2) 3.88 (1) / 4.71 (2) 2.60 (1) / 3.21 (2) 3.30 (1) / 4.07 (2) 3.81 (1) / 4.66 (2) COP 4.38 (1) / 3.28 (2) 4.25 (1) / 3.27 (2) 4.12 (1) / 3.20 (2) 4.31 (1) / 3.38 (2) 4.24 (1) / 3.22 (2) 4.20 (1) / 3.23 (2) EER 3.32 (1) / 2.71 (2) 2.78 (1) / 2.32 (2) 2.63 (1) / 2.21 (2) 3.32 (1) / 2.71 (2) 2.96 (1) / 2.47 (2) 2.72 (1) / 2.28 (2) Dimensions Unit Height mm 1,418 Width mm 1,435 Depth mm 382 Weight Unit kg 180 Hydraulic component 44 Back-up heater current Type 6V3 6W1 Power Phase/Frequency/ Hz/V supply Voltage 1~/50/230 3~/50/400 Operation range Ambient Min.~Max. CWB -20~40 Water side Min.~Max. C 15 (3)~55 (3) Cooling Ambient Min.~Max. CDB 10~46 Water side Min.~Max. C 5~22 Domestic hot Ambient Min.~Max. CDB -20~43 water Water side Min.~Max. C 25~80 Refrigerant Type R-410A Charge kg 3.0 TCO2eq 6.2 Control Expansion valve (electronic type) GWP 2,088 Sound power level Nom. db(a) Cooling Nom. db(a) Sound pressure Nom. db(a) level Cooling Nom. db(a) Compressor component Space heating Main power supply Average General climate water outlet 55 C Average General climate water outlet 35 C Name V3 W1 Phase 1~ 3N~ Frequency Hz 50 Voltage V ηs (Seasonal space heating efficiency) % SCOP Seasonal space heating A+ eff. class ηs (Seasonal space heating efficiency) % SCOP Seasonal space heating A+ eff. class (1) cooling Ta 35 C - LWE 18 C (DT = 5 C); heating Ta DB/WB 7 C/6 C - LWC 35 C (DT = 5 C) (2) cooling Ta 35 C - LWE 7 C ( DT = 5 C); heating Ta DB/WB 7 C/6 C - LWC 45 C ( DT = 5 C ) (3) 15 C-25 C: BUH only, no heat pump operation = during commissioning

38 Technical data air-to-water heat pump Daikin Altherma low temperature monobloc only air to water monobloc system, ideal when indoor space is limited EDLQ-BB Single Unit EDLQ 011BB6V3 014BB6V3 016BB6V3 011BB6W1 014BB6W1 016BB6W1 capacity Nom. kw (1) / (2) (1) / (2) (1) / (2) (1) / (2) (1) / (2) (1) / (2) Power input Nom. kw 2.56 (1) / 3.31 (2) 3.29 (1) / 4.01 (2) 3.88 (1) / 4.71 (2) 2.60 (1) / 3.21 (2) 3.30 (1) / 4.07 (2) 3.81 (1) / 4.66 (2) COP 4.38 (1) / 3.28 (2) 4.25 (1) / 3.27 (2) 4.12 (1) / 3.20 (2) 4.31 (1) / 3.38 (2) 4.24 (1) / 3.22 (2) 4.20 (1) / 3.23 (2) Dimensions Unit Height mm 1,418 Width mm 1,435 Depth mm 382 Weight Unit kg 180 Hydraulic component Back-up heater current Type 6V3 6W1 Power Phase/ Hz/V supply Frequency/ Voltage 1~/50/230 3~/50/400 Operation range Ambient Min.~Max. CWB -20~40 Water side Min.~Max. C 15 (3)~55 (3) Domestic hot Ambient Min.~Max. CDB -20~43 water Water side Min.~Max. C 25~80 Refrigerant Type R-410A Charge kg 3.0 TCO2eq 6.2 Control Expansion valve (electronic type) GWP 2,088 Sound power level Nom. db(a) Sound pressure level Nom. db(a) Compressor Main power Name V3 W1 component supply Phase 1~ 3N~ Frequency Hz 50 Voltage V Space heating Average climate water outlet 55 C Average climate water outlet 35 C General General ηs (Seasonal space heating efficiency) % SCOP Seasonal space A+ heating eff. class ηs (Seasonal space heating efficiency) % SCOP Seasonal space A+ heating eff. class (1) cooling Ta 35 C - LWE 18 C (DT = 5 C); heating Ta DB/WB 7 C/6 C - LWC 35 C (DT = 5 C) (2) cooling Ta 35 C - LWE 7 C ( DT = 5 C); heating Ta DB/WB 7 C/6 C - LWC 45 C ( DT = 5 C ) (3) 15 C-25 C: BUH only, no heat pump operation = during commissioning 45

39 Air-to-water heat pump Daikin Altherma Flex type Daikin Altherma Flex Type outdoor units Daikin Altherma Flex Type outdoor units Nominal heating capacity is measured at Ta 7 C and nominal cooling capacity at Ta 35 C with a 100% connection ratio. Daikin Altherma Flex outdoor unit 8HP Outdoor unit with 22,4kW heating and 20kW cooling capacity, power suppy 3~ 400V Daikin Altherma Flex outdoor unit 10HP Outdoor unit with 28 kw heating and 25kW cooling capacity, power suppy 3~ 400V Daikin Altherma Flex outdoor unit 12HP Outdoor unit with 33,6kW heating and 30kW cooling capacity, power suppy 3~ 400V Daikin Altherma Flex outdoor unit 14HP Outdoor unit with 39,2kW heating and 35kW cooling capacity, power suppy 3~ 400V Daikin Altherma Flex outdoor unit 16HP Outdoor unit with 44,8kW heating and 40kW cooling capacity, power suppy 3~ 400V Type / Order No. EMRQ8A EMRQ10A EMRQ12A EMRQ14A EMRQ16A Daikin Altherma Flex Type indoor units Daikin Altherma Flex Type indoor units (floorstanding) for heating& cooling and heating only applications. All basic necessary hydraulic components included. Daikin Altherma Flex 5kW indoor unit heating only Power Supply 1~ 230V Daikin Altherma Flex 5kW indoor unit heating & cooling Power Supply 1~ 230V Daikin Altherma Flex 8kW indoor unit heating Power Supply 1~ 230V Daikin Altherma Flex 8kW indoor unit heating & cooling Power Supply 1~ 230V Daikin Altherma Flex 11kW indoor unit heating only Power Supply 1~ 230V Daikin Altherma Flex 14kW indoor unit heating only Power Supply 1~ 230V Daikin Altherma Flex 16kW indoor unit heating only Power Supply 1~ 230V Daikin Altherma Flex 11kW indoor unit heating only Power Supply 3~400V Daikin Altherma Flex 14kW indoor unit heating only Power Supply 3~400V Daikin Altherma Flex 16kW indoor unit heating only Power Supply 3~400V Type / Order No. EKHVMRD50AB EKHVMYD50AB EKHVMRD80AB EKHVMYD80AB EKHBRD011ADV1 EKHBRD014ADV1 EKHBRD016ADV1 EKHBRD011ADY1 EKHBRD014ADY1 EKHBRD016ADY1 Price HUF , , , , ,- Price HUF , , , , , , , , , ,- 46

40 Daikin Altherma Flex Type Options & accessories applicable for: kw Wired room thermostat Wired digital room thermostat Wireless room thermostat monitoring and control ModBus interface Digital I/O PCB Remote alarm / operation status Modbus Interface monitoring and control ModBus interface Sequencing Controller master/slave control kit that can control and monitor up to 16 hydroboxes, connected through RTD-W Thermostat external sensor Temperature measurement remotely from wireless room thermostat (e.g. floor temperature) Demand PCB for connection of room thermostat or backup heater required when EKRTWA or EKRTR is used as a room thermostat or if a backup heater is installed Remote user interface can be used as a second user interface (master/slave) besides the one delivered with the indoor unit In-line backup heater 1~, 230V, 6 kw Electrical backup heater for space heating support only In-line backup heater 3~, 400V, 6 kw Electrical backup heater for space heating support only Option kit for standalone tank Kit required when EKHTS tanks are to be placed next to the indoor unit Optionional billing kit Option kit for billing of tank mounted on indoor unit Central drainpan kit for outdoor unit drain pan kit to collect the condensate after defrost operation Domestic hot water connection kit for EKHWP300(P)B connection kit for HT in combination with EKHWP300(P)B Domestic hot water connection kit for EKHWP500(P)B connection kit for HT in combination with EKHWP500(P)B Type / Order No. Price HUF EKRTWA ,- EKRTR ,- EKRP1HBA ,- RTD-W ,- EKCC-W ,- EKRTETS 5.166,- EKRP1AHT ,- EKRUAHTB ,- EKBUHA6V ,- EKBUHA6W ,- EKFMAHTB ,- EKMBIL ,- KWC25C ,- EKEPHT3H ,- EKEPHT5H ,- Domestic hot water tanks applicable for: kw Stainless steel domestic hot water tank 200 l Domestic hot water tank 200 l, Dimensions H x B x T = 1335 x 600 x 695, height increases to 2010 if mounted on top of indoor unit Stainless steel domestic hot water tank 260 l Domestic hot water tank 200 l, Dimensions H x B x T = 1610 x 600 x 695, height increases to 2285 if mounted on top of indoor unit Pressureless 300 l domestic hot water tank pressureless hygienic domestic hot water tank with solar option Pressureless 500 l domestic hot water tank pressureless hygienic domestic hot water tank with solar option Pressureless 300 l domestic hot water tank pressureless hygienic domestic hot water tank with pressurised solar option Pressureless 500 l domestic hot water tank pressureless hygienic domestic hot water tank with pressurised solar option Type / Order No. Price HUF EKHTS200AC ,- EKHTS260AC ,- EKHWP300B ,- EKHWP500B ,- EKHWP300PB ,- EKHWP500PB ,- 47

41 Technical data Daikin Altherma Flex Type Daikin Altherma Flex Type Low energy bills and low CO 2 emissions Easy installation and maintenance Integrated heat recovery system The ultimate heating solution for residential and commercial applications based on air to water heat pump technology Customised to meet your building s needs: up to 10 indoor units can be connected to 1 outdoor unit EMRQ-A Outdoor Unit EMRQ 8A (1) 10A (2) 12A (3) 14A (4) 16A (5) capacity Nom. kw 22.4 (6) 28 (6) 33.6 (6) 39.2 (6) 44.8 (6) Cooling capacity Nom. kw 20 (7) 25 (7) 30 (7) 35 (7) 40 (7) Seasonal efficiency Domestic hot water heating 48 Average climate water outlet 55 C General Declared load profile XL Average ηwh % climage (water heating efficiency) Water heating energy efficiency A class General ηs % (Seasonal space heating efficiency) SCOP Seasonal space heating A+ eff. Class Casing Colour Daikin White Material Painted galvanized steel plate Dimensions Unit HeightxWidthxDepth mm 1,680x1,300x765 Weight Unit kg Operation range Min. CWB -15 Max. CWB 20 Domestic hot water Ambient Min.~Max. CDB -15~35 Cooling Min. CDB 10 Max. CDB 43 Refrigerant Type / GWP R-410A / 2,087.5 Charge kg Charge TCO 2 Eq Piping connections Liquid OD mm Suction OD mm High and low pressure gas OD mm Piping length OU - IU Max. m 100 System Equivalent m 120 Total piping length System Actual m 300 Sound power level Nom. db(a) Sound pressure level Nom. db(a) Power supply Phase/Voltage V 3~/ Current Recommended fuses A (1) 100% connection ratio of EMRQ8A / 4x EKHVMYD50AB / 4x EKHTS260AC (2) 100% connection ratio of EMRQ10A / 2x EKHBRD014AD / 2x EKHTS260AC (3) 100% connection ratio of EMRQ12A / 2x EKHBRD016AD / 2x EKHTS260AC (4) 100% connection ratio of EMRQ14A / 7x EKHVMYD50AB / 7x EKHTS260AC (5) 100% connection ratio of EMRQ16A / 4x EKHBRD016AD / 4x EKHTS260AC (6) Condition: Ta=7 CDB/6 CWB, 100% connection ratio (7) Condition: Ta=35 CDB, 100% connection ratio (8) Contains fluorinated greenhouse gases

42 Technical data Daikin Altherma Flex Type 5 kw - 8 kw, only EKHVMYD are for heating and cooling EKHVMRD50A EKHVMRD80A EKHVMYD50A EKHVMYD80A Basic data Casing Colour Metallic grey Material Precoated sheet metal Dimensions Unit HxWxD mm 705x600x695 Weight Unit kg Ambient Min.~Max. C -15~20 Water side Min.~Max. C 25~80 Operation range Cooling Ambient Min.~Max. CDB -~- 10~43 Water side Min.~Max. C -~- 5~20 Domestic hot water Ambient Min.~Max. CDB -15~35 Water side Min.~Max. C 45~75 Refrigerant Type R-134a Charge kg 2 Sound pressure level Nom. db(a) 40 1 / 43 (2) 42 1 / 43 (2) 40 1 / 43 (2) 42 1 / 43 (2) Night quiet mode Level 1 db(a) 38 1 Name V1 Power supply Phase 1~ Frequency Hz 50 Voltage V Current Recommended fuses A kw - 16 kw only for heating EKHBRD011ADV1 EKHBRD014ADV1 EKHBRD016ADV1 EKHBRD011ADY1 EKHBRD014ADY1 EKHBRD016ADY1 Basic data Casing Colour Metallic grey Material Precoated sheet metal Dimensions Unit HxWxD mm 705x600x695 Weight Unit kg 144,25 147,25 Ambient Min.~Max. C -20~20 Water side Min.~Max. C 25~80 Operation range Cooling Ambient Min.~Max. CDB -~- Water side Min.~Max. C -~- Domestic hot water Ambient Min.~Max. CDB -20~35 Water side Min.~Max. C 25~80 Refrigerant Type R-134a Charge kg 3,2 Sound pressure level Nom. db(a) 43 (1) / 46 (2) 45 (1) / 46 (2) 46 (1) / 46 (2) 43 (1) / 46 (2) 45 (1) / 46 (2) 46 (1) / 46 (2 Night quiet mode Level 1 db(a) Name V1 Y1 Power supply Phase 1~ 3~ Frequency Hz 50 Voltage V Current Recommended fuses A (1) Sound levels are measured at: EW 55 C; LW 65 C (2) Sound levels are measured at: EW 70 C; LW 80 C 49

43 Refrigerant branch kits for outdoor units 3 pipes 2 pipes Outdoor unit capacity type (HP) imperial metric imperial metric KHRQ23M29T9 KHRQM23M29T KHRQ22M29T9 KHRQM22M29T Price HUF , , , ,- 12 ~ 16 KHRQ23M64T KHRQM23M64T KHRQ22M64T KHRQM22M64T Price HUF , , , ,- Refnet joints for indoor units 3 pipes 2 pipes capacity index imperial metric imperial metric < 200 KHRQ23M20T KHRQM23M20T KHRQ22M20T KHRQM22M20T Price HUF , , , ,- 200 x < 290 KHRQ23M29T9 KHRQM23M29T KHRQ22M29T9 KHRQM22M29T Price HUF , , , ,- 290 x < 520 KHRQ23M64T KHRQM23M64T KHRQ22M64T KHRQM22M64T Price HUF , , , ,- Refnet headers for indoor units 3 pipes 2 pipes capacity index imperial metric imperial metric < 200 and 200 x < 290 KHRQ23M29H KHRQM23M29H KHRQ22M29H KHRQM22M29H Price HUF , , , ,- 290 x < 520 KHRQ23M64H KHRQM23M64H KHRQ22M64H KHRQM22M64H Price HUF , , , ,- 50

44 Solar system Overview V21P Material list for standard Solaris systems for hot water preparation and heating support V26P Solar panel V26P Number of solar panels Type of installation Article 2 On-roof Quantity 2 In-roof Quantity 2 Flat roof Quantity 3 On-roof Quantity Order Type No. Solaris flat collector Solaris V26P Solar panel connection FIX-VBP RTX Mounting rail FIX single collector MP On-roof installation pack for one solar panel DB) (4 roof hook per kit) Standard roof hook pressurised solar P) (1 roof hook per kit) In-roof installation kit, basic flashing for two solar panels In-roof installation pack, additional flashing for central solar panel Flat-roof frame, basic pack for two solar panels Flat-roof frame, expansion pack additional solar panel FIX-ADP RTX FIX ADD IB V26P IE V26P FB V26P FE V26P Sum gross 1) Drain-Back system in HUF Sum gross 1) Pressurised system in HUF 3 In-roof Quantity 3 Flat roof Quantity 4 On-roof Quantity 4 In-roof Quantity 4 Flat roof Quantity 5 On-roof Quantity 5 In-roof Quantity 2 3) ) ) ) ) ) ) ) Flat roof Quantity , , , , , , , , , , , , , , , , , , , , , , , ,- List of materials Solaris Drain-Back standard systems Number of solar panels Installation type / item Type Order No. On-roof Quantity In-roof Quantity Sanicube Solaris SCS 538/16/0-DB SCS 538/16/0-DB Control and pump unit RPS Additional support troughs for Solaris connection line TS Solaris connection pipe CON Roof penetration pack Solaris on-roof RCAP RCRP Anthracite Red Flat roof Quantity Installation accessories, Solaris in-roof RCIP RTX Roof penetration pack flat roof RCFP RTX Sum gross 1) in HUF , , ,- Material listing Solaris pressurised installations 2) Number of solar panels Article Type Order No. up to 2 Quantity up to 3 Quantity 4 to 5 Quantity Sanicube Solaris SCS 538/16/0-P SCS 538/16/0-P Solaris pressurised solar regulator DSR ROTEX Solaris pressure station RDS Solaris pressurised solar line DN16 15m CON 15P Solaris pressurrised solar connection kit DN16 CON CP Solaris pressurised solar line DN20 15m CON 15P Solaris pressurised solar connection kit DN20 CON CP Diaphragm expansion vessel Solaris 12l MAG S Diaphragm expansion vessel Solaris 25l * MAG S Diaphragm expansion vessel Solaris 35l ** MAG S RTX Installation material Solaris pressurised system 2) RCP Sum gross 1) in HUF not relevant ,- not relevant Nominal volume, complete system Number of solar panels Connecting line 15 m Nominal volume Entire system (l) DN 16 DN 16 Observe footmotes on page 115! DN 20 DN ,7 24,4 26,1 116

45 Solar system Overview V26P Material list for standard Solaris systems for hot water generation and heating support H26P Solar panel H26 P Number of solar panels Type of installation Article Solaris flat collector Solar panel connection Type Solaris H26P FIX-VBP Installation rail guide for FIX MP individual solar panel 200 Standard roof hook pressurised solar P) (1 roof hook per kit) Flat roof support frame basic kit for one solar panel Flat roof trestle Extension pack for one additional solar panel Sum gross 1) Drain-Back system in HUF Sum gross 1) Pressurised system in HUF Order No. 1 On-roof Quantity 1 Flat roof Quantity 2 On-roof Quantity 2 Flat roof Quantity 3 On-roof Quantity 3 Flat roof Quantity 4 On-roof Quantity 4 Flat roof Quantity 5 On-roof Quantity RTX RTX 5 Flat roof Quantity FIX-ADD ) 0 6 2) ) ) ) 0 FB H26P FE H26P , , , , , , , , , , , , , , , , , , , ,- Nominal volume, complete system Number of solar panels Connecting line 15 m Nominal volume System (I) DN 16 DN 16 DN 20 DN 20 21,6 23, ,1 Material listing Solaris pressurised installations 1) Number of solar panels Article Sanicube Solaris SCS 538/16/0-P Type SCS 538/16/0-P Order No. up to 3 Quantity 4 to 5 Quantity Solaris pressurised solar regulator DSR ROTEX Solaris pressure station RDS Solaris pressurised solar line DN16 15m CON 15P Solaris pressurrised solar connection kit DN16 CON CP Solaris pressurised solar line DN20 15m CON 15P Solaris pressurised solar connection kit DN20 CON CP Diaphragm expansion vessel Solaris 12l MAG S Diaphragm expansion vessel Solaris 25l ** MAG S Diaphragm expansion vessel Solaris 35l ** MAG S RTX 0 1 Installation material Solaris pressurised system 2) RCP Sum gross in HUF ,- not relevant Pressurised system (-P) P) Only required for pressurised installations. * Optional accessories not included in price. ** Simply a standard recommendation, after detailed MAG layout, in accordance with the individual framework conditions, other MAG types may be required. 1) The roof penetration for on-roof and flat roof installation is to be provided by the customer. The solar fluid must be ordered separately. 2) The number of roof hooks must be checked if necessary (see installation instructions ADM). List of materials for solar components that connect several storage tanks Total number of storage tanks Article Type Order No. 2 Quantity Sanicube Solaris SCS 538/16/0-DB SCS 538/16/0-DB Solaris storage tank extension kit CON SX Solaris storage tank extension kit 2 CON SXE Quantity Sum gross in HUF not relevant not relevant 117

46 Solar heating system Solaris high-efficiency flat solar panel Stable watertight solar panel frame made of black anodised aluminium, highly selective coating, special safety glass, low-reflexion, efficient heat insulation of the solar panel back plane with mineral wool. Minimum collector yield over 525 kwh / m2 per year (location Würzburg, Germany). Suitable for drain-back and pressurised systems. Solaris high-efficiency flat solar panel V21P (2000 x 1006 x 85 mm), opening area 1.79 m², Weight 35 kg, water content 1.3 l. Max. 6 bar Type Order No. Price HUF V21P RTX ,- Solaris high-efficiency flat solar panel V26P (2000 x 1300 x 85 mm), opening area 2.35 m², Weight 42 kg, water content 1.7 l. Max. 6 bar V26P ,- Solaris high-efficiency flat solar panel H26P (1300 x 2000 x 85 mm), opening area 2.35 m², Weight 42 kg, water content 2.1 l. Max. 6 bar Solaris solar panel connection Installation profile connector, expansion joints and double clamping blocks H26P RTX ,- FIX-VBP RTX ,- Installation profile rail for V21P Consisting of installation profile rails and Solar panel securing clip Installation profile rail for V26P Consisting of installation profile rails and Solar panel securing clip FIX MP ,- FIX MP ,- Installation profile rail for H26P Consisting of installation profile rails and Solar panel securing clip Support trough for Solaris connection line Support troughs (5 in number, length, in each case, 1.3 m) for support of the Solaris plastic connection lines in Drain-Back. On-roof installation pack slate 4 roof ties for flat roofing, e.g. slate, for one solar panel FIX MP ,- TS ,- FIX ADS ,- On-roof installation kit MULTI for one solar panel 4 double height-adjustable roof ties for drainback system including fixing materials for one solar panel FIX-ADP RTX ,- Standard roof ties for pressurised solar 1 roof tie incl. attachment material Note: Standardsystem V21P / V26P 6 roof hooks per two panels. For more details and design fundamentals, please see manual. Roof holder for corrugated covering 4 holders including fixing material for one solar panel FIX-ADD ,- FIX-WD RTX ,- Roof holder for welted sheet metal covering 4 holders including fixing material for one solar panel. Note: for on-roof installation only. FIX-BD RTX ,- 118

47 Solar heating system Solar system for pressurised use and Drain-Back, ROTEX Solaris Article Type Order No. Price HUF Basic in-roof mounting pack V21P Basic flashing for two solar panels, Covering sheets complete with installation material. Minimum roof gradient 15 IB V21P ,- Expansion in-roof mounting pack V21P Additional flashing for another solar panel, Covering sheets complete with installation material. Minimum roof gradient 15 IE V21P ,- Basic in-roof mounting pack V26P Basic flashing for two solar panels, Covering sheets complete with installation material. Minimum roof gradient 15 IB V26P ,- Expansion in-roof mounting pack V26P Additional flashing for another solar panel, Covering sheets complete with installation material. Minimum roof gradient 15 IE V26P ,- In-roof covering slate supplementary pack 30 layer pieces for flat coverings, e.g. slate (per basic in-roof pack you will need one supplementary pack.) FIX-IES RTX ,- Basic pack flat-roof frame for mounting of two V26P solar panels on flat roofs Pre-assembled system for simple and rapid installation, stepwise adjustable erection angle (30 to 60 ). Suitable for wind load zone WLZ 2 (only to a limited extent for WLZ 3) Extension pack flat-roof frame for one additional V26P solar panel Extension for FB V26P FB V26P ,- FE V26P ,- Basic pack flat-roof frame for mounting of one H26P collector on flat roofs Pre-assembled system for simple and rapid installation, stepwise adjustable erection angle (30 to 60 ). Suitable for wind load zone WLZ 2 (only to a limited extent for WLZ 3) Extension pack flat-roof frame for one additional H26P solar panel Extension for FB H26P FB H26P ,- FE H26P ,- Detaching tool FIX LP RTX 2.583,- Pressurised system (-P) Drain-Back system (-DB) 119

48 Solar heating system Solar system for pressure use, ROTEX Solaris Solaris pressurised solar regulator Solar differential temperature regulator for the ROTEX Solaris pressurised system. Regulator with graphic display for representation of hydraulic schematics and yield balances, for example. Including return flow and storage tank temperature sensor and housing for wall mounting. ROTEX pressure station Consists of: Pipe connection ø 22 mm including pipe compression fittings and support sleeves (5x), Flow measurement unit with 2 x KFE cock, integrated air separator, ball-cocks with integrated back-flow prevention, Safety group with pressure gauge, including insulation and installation accessories. Type Order No. Price HUF DSR On Request RDS ,- Solaris pressurised solar line DN m thermally-insulated stainless steel corrugated pipe line for solar pressurised systems with inserted sensor line nominal size DN 16. For systems up to 3 solar panels and a line length of up to 25 m. Without connection fittings. Solaris pressurised solar connection kit DN 16 All necessary fittings for connecting the pressurised solar line DN 16. Required together with CON 15P16. CON 15P ,- CON CP ,- Solaris pressurised solar line connector DN 16 Fittings for connecting two pressurised solar lines DN 16. CON XP ,- Solaris pressurised solar line DN m thermally-insulated stainless steel corrugated pipe line for solar pressurised systems with inserted sensor line nominal size DN 20. For systems up to 5 solar panels and a line length of up to 25 m. Without connection fittings Solaris pressurised solar connection kit DN 20 All necessary fittings for connecting the pressurised solar line DN 20. Always required together with CON 15P20. CON 15P ,- CON CP ,- Solaris pressurised solar line connector DN 20 Fittings for connecting two pressurised solar lines DN 20 CON XP ,- Installation material Solaris pressurised system Connection fittings for pressurised systems and solar panel installation material, consisting of installation material for solar panel and connection pipe, 2 m UV-proof thermal insulation for the outer area, connection fittings and panel temperature sensor. The roof penetration must be provided to the customer Solar panel series connector for Solaris pressure system Connection kit for connecting two rows of solar panels in parallel. Consisting of solar panel installation material, equipotential bonding terminals, end caps, pressure connection elbows and 1 m thermally-insulated connectiong pipe RCP On Request CON LCP ,- Diaphragm expansion tank 12l with connection group For ROTEX Solaris pressurised installations up to max. 2 x V21P / V26P - solar panels MAG S ,- 120

49 Solar heating system Solar system for pressure use, ROTEX Solaris Diaphragm expansion vessel 25 l with connection block For ROTEX Solaris pressure systems with up to max. 3 solar panels Type Order No. Price HUF MAG S ,- Diaphragm expansion vessel 35 l with connection block For ROTEX Solaris pressure systems with up to max. 5 solar panels MAG S RTX ,- ROTEX SOLARFLUID CORACON SOL 5F 20 l can of pre-mixed solar fluid, Functional range up to -28 C CORACON SOL 5F RTX ,- ROTEX SOLARFLUID CORACON SOL 5 1 l of solar fluid concentrate for extension of the frost range. With 20 l of solar fluid with 1 l additive, the use range extends down to -33 C For 20 l of solar fluid with 2x 1 l of additive, the functional range is extended to -38 C Circulation lance For energetically-optimised incorporation of the domestic water circulation in the hot water connection to the ROTEX storage tank. CORACON SOL ,- ZKL ,- Thermostatic mixer as scalding protector Thermal safety device for the domestic water pipe. Setting range C Screw connection kit 1" For connection of the scald protection VTA32 Thermostatic regulator 230 V With capillary tube temperature sensor, setting range C 3-way switching valve 1" male With motor drive 230 V, switchover time 6 sec. VTA , ,- SCS-TR ,- 3 W-UV ,- 121

50 Solar heating system Solar system for Drain-Back, ROTEX Solaris RPS4 regulation and pump unit Ready to plug in unit (230 V), with digital differential temperature regulation, return and storage tank temperature sensors, operational pump and pressure increase pump. Complete, in casing, for installation on all Solaris storage tanks and HYC storage tanks from Type Order No. Price HUF RPS not relevant INFO: The flow sensor (FLS 20), included in the supply, provides more effective operation of the RPS4. In addition to direct calculation of the heat output, the sensor allows modulation of the operating pump and thus an additional saving in electrical energy. Retrofitting older storage tanks: Please contact our service department. Fill and drain connection For RPS3/RPS4 and tanks from 2013, for easy filling and emptying through the fill and drain valve Fill and drain connection DB-Solar For easy filling of drainback solar systems from 2013 through the solar flow connector Burner blocking contact connection cable For RPS2, RPS3, RPS3 M, RPS3 25M. KFE BA not relevant KFE DB BA not relevant BSKK RTX 5.812,- FlowGuard regulating valve with flow rate indicator 2-16 l / min FLG RTX ,- Solaris connection pipe Ready to connect connection line 15 m between solar panel and pump station, consisting of thermally-insulated flow and return line with integrated sensor cable Solaris connection pipe Ready to connect connection line 20 m between solar panel and pump station, consisting of thermally-insulated flow and return line with integrated sensor cable CON ,- CON ,- 122

51 Solar heating system Solar system for Drain-Back, ROTEX Solaris Solaris connection pipe extension Ready to plug in including installation material and connection fittings L = 2.5 m L = 5.0 m L = 10.0 m Type Order No. Price HUF CON X 25 CON X 50 CON X RTX RTX , , ,- Maximum possible length of the connection pipe: Number of solar panels Max. length 2 45 m 3 30 m 4 17 m 5 15 m Extension of the inflow pipe UV-resistant thermally-insulated, length = 8 m, including cable connecting fitting for the solar panel sensor line On-roof roof penetration, anthracite Roof penetration pack with connection fittings and solar panel installation material, consisting of anthracite roof penetration, installation material for solar panel and connection pipe, 2 m UVproof heat insulation for the outer area, connection fittings with detaching tools and panel temperature sensor CON XV ,- RCAP ,- On-roof roof penetration, tile red Roof penetration pack with connection fittings and solar panel installation material, consisting of tile red roof penetration, installation material for solar panel and connection pipe, 2 m UVproof heat insulation for the outer area, connection fittings with detaching tools and panel temperature sensor RCRP ,- Solaris solar panel row connector Connection kit for connecting two rows of solar panels one above the other. Consisting of solar panel installation material, equipotential bonding terminals, end caps, connection elbows and 1 m thermally-insulated piping CON RVP RTX ,- Installation material, Solaris in-roof Ready to plug in including installation material and connection fittings RCIP RTX ,- Roof penetration, flat roof Roof penetration pack with connection fittings and solar panel installation material, consisting of flat-roof roof penetration, installation material for solar panel and connection pipe, 8.5 m UV-proof heat insulation for the outer area, connection fittings with detaching tools and panel temperature sensor Roof penetration flat-roof for alternate side solar panel connection Flat roof penetration with screw connections and blind plugs for penetration openings which are not used RCFP RTX ,- CON FE ,- Solaris storage tank extension kit Connection kit for linking two Sanicube Solaris storage tanks (from storage tank model 201 3), consisting of a return flow connection pipe and an flow distributor line CON SX not relevant 123

52 Solar heating system Solar system for Drain-Back, ROTEX Solaris Solaris storage tank extension kit 2 Connection kit for linking additional Sanicube Solaris storage tanks (from storage tank model 201 3), consisting of a return flow connection pipe and an flow connection line Circulation lance For energetically-optimised incorporation of the domestic water circulation in the hot water connection to the ROTEX storage tank Type Order No. Price HUF CON SXE not relevant ZKL ,- Thermostatic mixer as scalding protector Thermal safety device for the domestic water pipe. Setting range C Screw connection kit 1" For connection of the scald protection VTA32 Thermostatic regulator 230 V With capillary tube temperature sensor, setting range C VTA , ,- SCS-TR ,- 3-way switching valve 1" male With motor drive 230 V, switchover time 6 sec. 3 W-UV ,- 124

53 Solar heating system Technical data Solar system for pressurised use and Drain-Back, ROTEX Solaris Solaris flat collectors V 21 P V 26 P H 26 P Dimensions (W x D x H) mm 1006 x 85 x x 85 x x 85 x 1300 Net surface area m2 2,01 2,60 2,60 Aperture surface area m2 1,79 2,35 2,35 Absorbing surface area m2 1,80 2,36 2,36 Weight kg Water content Litres 1,3 1,7 2,1 Absorber Harp-shaped Cu pipe matrix with welded on highly selective coated aluminium plate Coating Miro-Therm (absorption max. 96%, emission approx. 5%± 2%) Glazing Single pane safety glass, Transmission approx. 92% Heat insulation Rock wool 50 mm Max. pressure drop at 100 l / h mbar 3,5 3,0 0,5 Possible pitch min. - max. On-roof and flat roof Possible pitch min. - max. In-roof Max. standstill temperature C approx. 200 Max. operating pressure: bar 6 The solar panels are standstill resistant over a long period and are tested for thermal shock. Minimum collector yield over 525 kwh / m2 per year with 40 % cloud coverage (location Würzburg, Germany) 125

54 Solar heating system Technical data Solar system for Drain-Back, ROTEX Solaris Control and pump unit RPS4 Dimensions (W x D x H) mm 230 x 142 x 815 Operating voltage V / Hz 230 / 50 Max. electrical power consumption W 65 (modulating 15-65) Control Digital differential temperature controller with clear text display Collector sensor Pt 1000 Storage tank and return sensor Feed temperature and flow sensor PTC voltage signal (3.5 V DC) Control and pump unit RPS4 Dimensions (W x D x H) mm 230 x 142 x 815 Operating voltage V / Hz 230 / 50 Max. electrical power consumption W 65 (modulating 15-65) Control Digital differential temperature controller with clear text display Collector sensor Pt 1000 Storage tank and return sensor Feed temperature and flow sensor PTC voltage signal (3.5 V DC) Control and pump unit RPS4 Dimensions (W x D x H) mm 230 x 142 x 815 Operating voltage V / Hz 230 / 50 Max. electrical power consumption W 65 (modulating 15-65) Control Digital differential temperature controller with clear text display Collector sensor Pt 1000 Storage tank and return sensor Feed temperature and flow sensor PTC voltage signal (3.5 V DC) 126

55 Energy efficiency class overview It s all about A Daikin Altherma LT Split compact for heating & cooling Air-to-water heat pump Daikin Altherma LT Split compact (heating & cooling) Leaving water temp. 55 C Leaving water temp. 35 C DHW heating (tapping profile) Type Product nr. Outdoor unit ERLQ004CV3 4 kw H / H Biv H & C / H & C Biv 300 l tank EHSH04P30B / EHSHB04P30B EHSX04P30B / EHSXB04P30B A++ - A(L) Outdoor unit ERLQ006CV3 6 kw H / H Biv H & C / H & C Biv H / H Biv H & C / H & C Biv 300 l tank EHSH08P30B / EHSHB08P30B EHSX08P30B / EHSXB08P30B 500 l tank EHSH08P50B / EHSHB08P50B EHSX08P50B / EHSXB08P50B A++ A++ - A(L) A(XL) Outdoor unit ERLQ008CV3 8 kw H / H Biv H & C / H & C Biv H / H Biv H & C / H & C Biv 300 l tank EHSH08P30B / EHSHB08P30B EHSX08P30B / EHSXB08P30B 500 l tank EHSH08P50B / EHSHB08P50B EHSX08P50B / EHSXB08P50B A++ A++ - A(L) A(XL) Outdoor unit (3 phase) ERLQ011CW1 11 kw H / H Biv H & C / H & C Biv Outdoor unit (1 phase) 500 l tank EHSH16P50B / EHSHB16P50B EHSX16P50B / EHSXB16P50B A++ - A(XL) ERLQ011CV3 H / H Biv H & C / H & C Biv 500 l tank EHSH16P50B / EHSHB16P50B EHSX16P50B / EHSXB16P50B A++ - A(XL) Outdoor unit (3 phase) ERLQ014CW1 14 kw H / H Biv H & C / H & C Biv Outdoor unit (1 phase) 500 l tank EHSH16P50B / EHSHB16P50B EHSX16P50B / EHSXB16P50B A++ - A(XL) ERLQ014CV3 H / H Biv H & C / H & C Biv 500 l tank EHSH16P50B / EHSHB16P50B EHSX16P50B / EHSXB16P50B A++ - A(XL) Outdoor unit (3 phase) ERLQ016CW1 16 kw H / H Biv H & C / H & C Biv Outdoor unit (1 phase) 500 l tank EHSH16P50B / EHSHB16P50B EHSX16P50B / EHSXB16P50B A++ - A(XL) ERLQ016CV3 H / H Biv H & C / H & C Biv 500 l tank EHSH16P50B / EHSHB16P50B EHSX16P50B / EHSXB16P50B A++ - A(XL) For the product and package labels and the technical fiches for all our heating products and systems, please visit the Daikin Energy Label Generator free access website: 146

56 Energy efficiency class overview Daikin Altherma LT Split wall mounted Air-to-water heat pump Daikin Altherma LT split wall mounted (heating & cooling) Leaving water temperature 55 C Leaving water temperature 35 C Type Product nr. Outdoor unit ERLQ004CV3 4 kw 6 kw 8 kw 11 kw 14 kw 16 kw and cooling Outdoor unit and cooling and cooling Outdoor unit and cooling and cooling Outdoor unit (3 phase) and cooling Outdoor unit (1 phase) and cooling Outdoor unit (3 phase) and cooling Outdoor unit (1 phase) and cooling Outdoor unit (3 phase) and cooling Outdoor unit (1 phase) and cooling 1 phase EHBH04CB3V EHBX04CB3V 3 phase EHBH08CB9W EHBX08CB9W 1 phase EHBH08CB3V EHBX08CB3V 3 phase EHBH08CB9W EHBX08CB9W 1 phase EHBH08CB3V EHBX08CB3V 3 phase EHBH11CB9W EHBX11CB9W 1 phase EHBH11CB3V EHBX11CB3V 3 phase EHBH16CB9W EHBX16CB9W 1 phase EHBH16CB3V EHBX16CB3V 3 phase EHBH16CB9W EHBX16CB9W 1 phase EHBH16CB3V EHBX16CB3V A++ A++ ERLQ006CV3 A++ A++ A++ A++ ERLQ008CV3 A++ A++ A++ A++ ERLQ011CW1 A+ A++ ERLQ011CV3 A+ A++ ERLQ014CW1 A+ A++ ERLQ014CV3 A+ A++ ERLQ016CW1 A+ A+ ERLQ016CV3 A+ A+ For the product and package labels and the technical fiches for all our heating products and systems, please visit the Daikin Energy Label Generator free access website: 147

57 Energy efficiency class overview Daikin Altherma LT Split integrated indoor Air-to-water heat pump Daikin Altherma LT split integrated (heating & cooling) Leaving water temp. 55 C Leaving water temp. 35 C DHW heating (tapping profile) Type Product nr. Outdoor unit ERLQ004CV3 4 kw and cooling 1 phase EHVH04S18CB3V EHVX04S18CB3V A++ A++ A(L) 1 phase bizone EHVZ04S18CB3V A++ A++ A(L) Outdoor unit ERLQ006CV3 6 kw and cooling and cooling 3 phase EHVH08S26CB9W EHVX08S26CB9W 1 phase EHVH08S18CB3V EHVX08S18CB3V A++ A++ A(XL) A++ A++ A(L) 1 phase bizone EHVZ08S18CB3V A++ A++ A(L) Outdoor unit ERLQ008CV3 8 kw and cooling and cooling 3 phase EHVH08S26CB9W EHVX08S26CB9W 1 phase EHVH08S18CB3V EHVX08S18CB3V A++ A++ A(XL) A++ A++ A(L) 1 phase bizone EHVZ08S18CB3V A++ A++ A(L) Outdoor unit (3 phase) ERLQ011CW1 and cooling 3 phase EHVH11S26CB9W EHVX11S26CB9W A+ A++ A(XL) 11 kw Outdoor unit (1 phase) and cooling 1 phase EHVH11S18CB3V EHVX11S18CB3V ERLQ011CV3 A+ A++ A(L) 1 phase bizone EHVZ16S18CB3V A+ - A(L) Outdoor unit (3 phase) ERLQ014CW1 and cooling 3 phase EHVH16S26CB9W EHVX16S26CB9W A+ A++ A(XL) 14 kw Outdoor unit (1 phase) and cooling 1 phase EHVH16S18CB3V EHVX16S18CB3V ERLQ014CV3 A+ A++ A(L) 1 phase bizone EHVZ16S18CB3V A+ - A(L) Outdoor unit (3 phase) ERLQ016CW1 and cooling 3 phase EHVH16S26CB9W EHVX16S26CB9W A+ A+ A(XL) 16 kw Outdoor unit (1 phase) and cooling 1 phase EHVH16S18CB3V EHVX16S18CB3V ERLQ016CV3 A+ A+ A(L) 1 phase bizone EHVZ16S18CB3V A+ - A(L) 148

58 Energy efficiency class overview Daikin Altherma high temperature Air-to-water heat pump Daikin Altherma HT heat pump (heating) Leaving water temperature 55 C Leaving water temperature 35 C 11 kw Type Outdoor unit (3 phase) Outdoor unit (1 phase) Product nr. ERRQ011AY1 EKHBRD011ADY1 A+ B ERRQ011AV1 EKHBRD011ADV1 A+ B 14 kw Outdoor unit (3 phase) Outdoor unit (1 phase) ERRQ014AY1 EKHBRD014ADY1 A+ B ERRQ014AV1 EKHBRD014ADV1 A+ B 16 kw Outdoor unit (3 phase) Outdoor unit (1 phase) ERRQ016AY1 EKHBRD016ADY1 A+ B ERRQ016AV1 EKHBRD016ADV1 A+ B Daikin Altherma ground source heat pump Ground source heat pump Daikin Altherma Ground source heat pump Leaving water temp. 55 C Leaving water temp. 35 C DHW heating (tapping profile) 10 kw Type Product nr. EGSQH10S18A9W A++ A++ A (L) For the product and package labels and the technical fiches for all our heating products and systems, please visit the Daikin Energy Label Generator free access website: 149

59 Energy efficiency class overview Daikin Altherma hybrid heat pump Hybrid heat pump Daikin Altherma Hybrid heat pump Leaving water temp. 55 C Leaving water temp. 35 C DHW heating (tapping profile) Type Product nr. Outdoor unit EVLQ05CV3 5 kw Heat pump indoor unit Gas condensing unit (Note country compliance) EHYHBH05AV32 EHYKOMB33AA2 EHYKOMB33AA3 A++ - A (XL) Outdoor unit EVLQ08CV3 8 kw Heat pump indoor unit Gas condensing unit (Note country compliance) EHYHBH08AV32 EHYKOMB33AA2 EHYKOMB33AA3 A++ - A (XL) and cooling Heat pump indoor unit Gas condensing unit (Note country compliance) EHYHBX08AV3 EHYKOMB33AA2 EHYKOMB33AA3 For the product and package labels and the technical fiches for all our heating products and systems, please visit the Daikin Energy Label Generator free access website: 150

60 Energy efficiency class overview Daikin Altherma LT monobloc Heat pump Daikin Altherma LT monobloc Leaving water temperature 55 C Leaving water temperature 35 C Type Product nr. 11 kw 1 phase unit and cooling 3 phase unit and cooling EDLQ011BB6V3 EBLQ011BB6V3 EDLQ011BB6W1 EBLQ011BB6W1 A+ A+ 14 kw 1 phase unit and cooling 3 phase unit and cooling EDLQ014BB6V3 EBLQ014BB6V3 EDLQ014BB6W1 EBLQ014BB6W1 A+ A+ 16 kw 1 phase unit and cooling 3 phase unit and cooling EDLQ016BB6V3 EBLQ016BB6V3 EDLQ016BB6W1 EBLQ016BB6W1 A+ A+ Heat pump Daikin Altherma LT monobloc Leaving water temperature 55 C Leaving water temperature 35 C Type Product nr. 5 kw Single unit and cooling EDLQ05CV3 EBLQ05CV3 A++ A++ 7 kw Single unit and cooling EDLQ07CV3 EBLQ07CV3 A++ A++ For the product and package labels and the technical fiches for all our heating products and systems, please visit the Daikin Energy Label Generator free access website: 151

61 Energy efficiency class overview Daikin Altherma Flex Type Air-to-water heat pump Daikin Altherma Flex Type (heating & cooling) Leaving water temperature 55 C DHW heating (tapping profile) Type Product nr. Outdoor unit EMRQ8AAY1 Set 1 4 x EKHVMYD50ABV1 4 x EKHTS260AC A+ A(XL) Outdoor unit EMRQ10AAY1 Set 2 2 x EKHBRD014AD 2 x EKHTS260AC A+ A(XL) Outdoor unit EMRQ12AAY1 Set 3 2 x EKHBRD016AD 2 x EKHTS260AC A+ A(XL) Outdoor unit EMRQ14AAY1 Set 4 7 x EKHVMYD50ABV1 7 x EKHTS260AC A+ A(XL) Outdoor unit EMRQ16AAY1 Set 5 4 x EKHBRD011AD 4 x EKHTS260AC A+ A(XL) For the product and package labels and the technical fiches for all our heating products and systems, please visit the Daikin Energy Label Generator free access website: 152

62 Notes 157

63 Commercial terms and conditions I. GENERAL These commercial terms and conditions (hereinafter 'Terms') shall apply to all of our deliveries of goods to companies (B2B). Any individual agreements deviating from these Terms shall be valid only if confirmed by us in writing and duly signed. Any informal statements are invalid. Any commercial terms and conditions of the ordering party shall not be applicable. Acceptance of the goods is in any event deemed to constitute acknowledgment of our Terms. Our customer services shall be subject to separate commercial terms and conditions. Our commercial terms and conditions can be found at II. OFFER Our offers are without engagement and non-binding. Any representation of models and any information about dimensions, weights and technical data are non-binding and subject to production-related and model-related changes. Such changes shall not constitute a defect. III. PLACING OF AN ORDER, CHANGE OF THE DELIVERABLE 1. Orders must be placed in writing (by letter, fax or or online ordering system). When Daikin confirms receipt of the order, this does not constitute an acceptance of the order. We are deemed to have accepted an order not until after we have explicitly confirmed acceptance in writing or actually executed that order. Any arrangement and agreement reached verbally and by phone must be confirmed in writing. 2. We reserve the right to rescind the contract even after having accepted an order if information we have obtained about the customer s liquidity in the meantime suggests that the customer will not be able to pay for the entire or for part of the order. 3. Having accepted an order, we also reserve the right to change and improve the deliverable, e.g. in respect of its type and design, to the extent the customer can be reasonably expected to accept such changes and improvements in consideration of our interests (e.g. delivery of an equivalent or more sophisticated device). Such changes and improvements are deemed approved in advance. 4. The customer s cancellation or change of an entire or of part of an order requires our written consent and entitles us to charge the customer - in addition to the services already provided and costs accrued - a (cancellation) fee equal to 20 % of the order value and at least HUF 250. For certain product groups (e.g. multiple scroll, screw chiller), separate cancellation rules apply, which can be found at IV. PRICES AND TERMS OF PAYMENT 1. Prices are based on the price list, as amended from time to time, which is usually issued once a year. We reserve the right to change prices also during the year. 2. Prices are understood to be net prices without any taxes, duties or charges in the quoted currency including packaging, unless otherwise indicated. We will not take back packaging and packing material. 3. We will not accept any objections to invoices which are received more than two weeks after receipt of an invoice. Unless otherwise indicated, invoices are due net 30 days from the invoice date; the payment date is the date on which a payment is received by us. In case of late payment, we will charge default interest at a rate of 12% p.a. In case of default, we may also demand all costs related to the collection of our claim, including, without limitation, dunning and collection charges. 4. If payment by instalments has been agreed, the maturity date will be accelerated if the customer is in default in respect of only one instalment. 5. We may make deliveries dependent on advance payment. 6. The customer may not withhold or offset payments in reliance on warranty or other claims. V. DELIVERY TIME 1. Indicated delivery times are non-binding and for reference only, although we endeavour to meet indicated deadlines. The customer has no right to insist on compliance with a certain delivery time. As a consequence, delays in delivery will not entail any claims for damages and do not entitle the customer to rescind the contract. The same holds true if delivery deadlines are not met due to force majeure, strike or other events outside our control. 2. We will not accept penalty claims asserted by the customer under any circumstances. 3. Partial deliveries are permitted. 4. If the ordering party is in arrears on an earlier delivery, Daikin may withhold deliveries pending payment of the earlier delivery and is not required to pay to the ordering party any damages in this respect. VI. ACCEPTANCE OF DELIVERIES, TRANSFER OF RISK, DELAYED ACCEPTANCE 1. Unless otherwise agreed, deliveries are made CIP (Incoterms 2010) to the named destination 2. In principle, delivery CIP covers only minimum transport insurance. Additional transport insurance will be purchased only if explicitly requested by customer and subject to a separate agreement and at the customer s cost and expense. 3. The customer must immediately check deliverables received by him or directly by his customers for any transport damage and he must record any damage to the packaging or the device in the delivery note and shall refuse delivery towards the forwarding agent. If the customer finds out only later that goods are damaged, the customer shall report any such damage to us immediately, in no case later than three working days after delivery; otherwise, any insurance claim may expire. 4. If the customer is in delay with acceptance, we - notwithstanding our other rights - may charge the goods as delivered or may otherwise dispose of them without setting a time limit. If we otherwise dispose of the goods, the delivery time will recommence on the day we receive the customer s written request calling for delivery of the goods. 5. We may charge the customer for any costs incurred due to late acceptance, including, without limitation, any storage costs. VII. RESERVATION OF TITLE 1. We will retain title to goods delivered pending full payment of all claims arising from our business relationship with the customer, even if the purchase price for specifically designated claims was paid. If our conditional goods are processed, we will acquire title to the new item without consideration. If the goods delivered by us are mixed, processed or combined with other items, the customer hereby assigns to us in proportion of the value of our invoices an ownership or coownership right of the combined or new item, both in respect of the interim and the final products. 2. The customer may resell goods delivered by us and the items created by processing, mixing or combining these only in the ordinary course of business. The customer hereby assigns to us any claims arising from such resale or from any other legal ground toward third parties, including, ancillary rights, in order to secure our - future - claims that may arise from our business relationship. The customer must record the assignment of these claims in his books not later than when the goods are resold. 3. Before having paid the purchase price of an item, the customer may resell that item only if he simultaneously informs the second buyer (end customer) that the resale proceeds have previously been assigned. 4. The customer may collect the assigned claims as long as he fulfils his payment obligations towards us according to the terms of the contract. The customer may not otherwise dispose of the conditional goods (e.g.: transfer of property by way of security, pledging). 5. The customer must immediately inform us of any attachment or other impairment of the conditional goods and/or the assigned claims and explain to the third party that we have retained title to those goods. Any related cost will be borne by the customer. VIII. WARRANTY AND LIABILITY A. Unless otherwise agreed and excluding any further claims, we are liable for any defects and the absence of warranted qualities of the goods at the time of delivery as follows: 1. Unless otherwise indicated below, the warranty period is 36 months of the delivery date (delivery to the forwarding agent). The customer bears the burden of proof that a defect had existed already at the time of delivery. 2. The customer may assert a warranty claim only if the equipment is both installed and put into operation by Daikin or a company trained by Daikin according to the Daikin installation instructions and regularly maintained according to the Daikin service notes. Unless otherwise agreed, Goods of "Daikin Applied Systems", which are manufactured on the basis of a specific order, such as chillers, heat pumps, condensing units (equipped with scroll, screw or centrifugal compressor), fan coil units (FCU) and air handling units / rooftop units under Daikin brand, generally include a 12-month warranty claim, provided that the machine was put into operation by Daikin itself or by a person certified by Daikin. In case of products designated J&E Hall International for Daikin the customer may assert an 18-month warranty claim. For Rotex branded products generally a 24-month warranty period is valid except for following variations: 10 years for underfloor heating pipes and system plates, VA-piping and variosafe oil storage tanks. 5 years for solar panels, variosystem and highcube oil tanks and variocistern rainwater tanks. 3 years for HPSU heat pump solar unit and hot water storage tanks HYC, SCS and SC. 3. In a warranty event, we undertake, at our election, to repair the defective goods or components or to make available faultless goods or components. There are no other warranty claims whatsoever. Labour cost, travel times, supplies, such as freezing agents and lubricants, or other costs (e.g. for installation, retrofitting) will not be reimbursed. Daikin, at its own discretion, will provide software updates from time to time. Updates may include error corrections, improvements as well as upgrades. Updates are provided to the customer in machine-readable and installable form, including installation instructions. The customer is required to install updates at his own cost and expense within a reasonable period of time. Any damage caused by a failure to install updates shall be the customer's sole responsibility, and Daikin does not accept any liability in this respect. 4. No warranty and/or liability is accepted, unless the customer reports visible defects by giving written notice within 3 working days of delivery and other defects are reported without delay after initial discovery. 5. In addition to paragraphs 2 to 4, no warranty and/or liability is accepted for 158

64 defects that have been caused by inadequate or improper use or treatment, failure to observe operating conditions or maintenance instructions, excessive use or inadequate operating materials or substitute materials or spare parts not provided by Daikin. In addition, no warranty is accepted for usual wear and tear of wearing parts, including, but not limited to, filters, burner nozzles, carbon brushes of engines, couplings, electrodes, protection anodes, UV probes and grids. 6. Unless we are granted the required time and opportunity to take all necessary warranty measures, we are released from any warranty claims and damages. If the customer continues to use defective goods, we warrant and/or are liable only for the original defect. We will not reimburse any cost of repairs which are carried out without our express prior consent. We disclaim any liability for the consequences of such repairs. 7. The warranty period for spare parts and other improvements is 6 months of delivery (delivery to the forwarding agent). 8. If a defect is remedied, the warranty period will not recommence for the replaced or repaired components. 9. We may refuse to remedy defects as long as the customer is in default with his payment obligations. 10. If third-party products are delivered and installed, warranty is restricted to assigning the warranty claims we may assert against the supplier of the thirdparty product. The customer may not assert any other warranty claims and does not qualify for any claims for a price reduction. B. We are liable for damage only if we demonstrably acted with intent or gross negligence. We disclaim any liability for slight negligence. We are particularly not liable for consequential damage (e.g. idle times due to wrong deliveries) and financial loss, lost profit, unachieved savings, loss of interest and any damage suffered from third-party claims against the customer, unless the foregoing is attributable to our intent or gross negli gence. If damage is attributable to the defective condition of goods delivered to us, we are liable only to the extent the producer or upstream supplier is liable to us. Our liability does in any case not exceed the invoice value of the incriminated goods. IX. GUARANTEE 1. In addition to warranty, within the warranty period as described in VIII A, we guarantee for proper functioning and the agreed performance. Daikin's guarantee covers both materials as well as working and travel times. The guarantee does not create any claims other than those for free removal of defects, such as damages. The guarantee shall be valid only if all of the following requirements have been satisfied: (1) Payment in full by the customer within the agreed performance period; (2) Professional installation by a licensed business; (3) Use under the specified conditions (fuel, fireplace, ambient conditions, etc.); (4) Putting into operation by the Daikin Service or by authorized Daikin service partners. 2. The guarantee shall expire if maintenance work as required by Daikin was not carried out at all, not in due time or not by a company authorized by Daikin and if the customer did not comply with the cleaning intervals as required by Daikin. The burden of proof for proper and timely conduct of maintenance and cleaning work lies with the customer. The guarantee shall also expire if the customer uses any accessories not authorized by Daikin or if a company not authorized by Daikin interferes with and makes changes to the delivered item. Any wearing parts are not covered by the guarantee. X. RETURNED GOODS 1. Goods can be returned and exchanged only upon our express and written consent. We accept returned goods only with a minimum net value of HUF per item and a maximum net value of HUF 50, per item and only provided that those goods are not damaged, have not been used, are in original packaging and are fit for resale. In particular, returns of already installed units (including chillers) and returns of any made to order units as well as spare parts are not permitted. 2. The customer shall complete the Request for Goods Return -form (available at the Daikin Business Portal and send it to us to the fax number or address provided by us within 10 calendar days after delivery, otherwise we will not accept the return. 3. Goods must be returned freight paid at the risk of customer to the destination indicated by us. 4. In every case of a return, a maximum of 80% of the net price charged by us to the customer will be credited. All standard returns will be subject to a restocking / administration charge of 20 % of the net price. 5. All returns will be inspected by us. If goods are returned wrongly (i.e. not in compliance with paragraph 1. above), we may refuse the returns and have them returned back to the customer at the customer s risk and costs. Alternatively, we may charge a higher restocking / administration fee than the above mentioned 20%. 6. Credit notes of any nature whatsoever will exclusively be offset against future deliveries. XI. INSTALLATION It is the responsibility of the customer to install and commission the goods and to ensure its employees, agents and subcontractors or any other persons used by the customer to install and commission the goods are fully trained to do so and that the terms of any instructions or manuals provided with the goods are followed. XII. ENVIRONMENT, LICENCES 1. The customer shall be responsible for all costs, charges, and expenses arising from or in connection with the decommissioning, recovery, recycling and disposal of all or part of the goods and shall not seek to recover such expenses or contribution from us. 2. The customer is responsible for obtaining and complying with all relevant licenses, permissions, permits and consents from appropriate regulatory bodies and for complying with any other lawful authority in connection with the storage, installation, operation, use, maintenance, repair, transportation, decommissioning, recovery and eventual disposal of the goods. 3. Where the customer sells all or part of the goods to another party, the customer may enter into a similar covenant with that party. XIII. CONFIDENTIALITY 1. All information and/or advice, whether written or oral, whether in relation to the goods or to our business, given by us to the customer, shall not be disclosed to any third party without our prior written consent, save to the extent that such information and/or advice is in the public domain otherwise than by virtue of a breach of this condition or that the disclosure is required by law. 2. The customer shall promptly give notice to us of any disclosure required by law and we may seek an appropriate remedy to prevent such disclosure. The customer undertakes to fully co-operate with us (at the customer s own expense) if we reject the validity of such a requirement. XIV. INTELLECTUAL PROPERTY RIGHTS 1. The customer shall have no rights to any intellectual property owned by or licensed to us. 2. The customer shall not allow any trademark or instruction or warning applied to the goods to be obliterated or obscured. 3. All designs, samples, models, experimental equipment, marketing devices, accessories and other items relating to the goods or their development or creation shall remain our property, shall be treated as confidential and shall not be copied, reproduced or disclosed to any person without our prior written consent. XV. PERSONAL DATA 1. The customer s personal data, which we received on the occasion of an order, will be electronically stored and processed for the purposes of fulfilling the order, providing goods and services to the customer, managing the relationship with the customer, for our internal accounting and processes and for legal or regulatory purposes. For some of these purposes we may need to share the customer s data with third parties but we always ensure that the data are kept confidential and protected by third parties. 2. The customer agrees that we may ask credit reference agencies and/or credit insurance companies to run credit searches or checks against the customer in order to assess the customer s financial performance and that we may pass on the customer information (name, address, contact details, name of owner, order details, order history, payment behavior, customer balance) to Atradius Credit Insurance N.V., Zweigniederlassung Österreich for this purpose. 3. The customer further agrees that we and other members of our group (as mentioned at may use the customer s personal data (name, address, contact details, order details and history) also for our own marketing purposes and contact the customer by phone, or SMS or other messaging service about our products and services which may be of interest to the customer. The customer may revoke his consent at any time. XVI. PLACE OF JURISDICTION, APPLICABLE LAW 1. All disputes arising from or in connection with this Agreement shall be exclusively referred to the courts in Vienna. 2. All contracts concluded by us and all disputes arising in connection with those contracts shall be governed by and construed in accordance with Austrian law without giving effect to its conflict of law rules and the UN Sales Convention. XVII. SEVERABILITY Should any term of these commercial terms and conditions or of the contract concluded between us and the customer be invalid or ineffective, this shall not affect the remaining terms hereof or thereof. Invalid terms shall be replaced by lawful terms which closest reflect the parties intent. The Daikin Commercial terms and conditions are also available in the internet at Campus 21, Europaring F12 / 402 A-2345 Brunn am Gebirge, Austria phone , fax , office@daikin-ce.com, 159

65 The new compact Daikin Altherma Four seasons, one feel-good climate Cosy warmth in winter, refreshing coolness in summer. The versatile Daikin LT compact air-to-water heat pump reduces your heating costs to a minimum. DAIKIN AIRCONDITIONING CENTRAL EUROPE HandelsgmbH campus 21, Europaring F12/402, A 2345 Brunn am Gebirge Tel.: +43 / 2236 / Fax: +43 / 2236 / office@daikin.at Daikin products are distributed by: Daikin Europe N.V. participates in the Eurovent Certification programme for Air conditioners (AC), Liquid Chilling Packages (LCP), Air handling units (AHU) and Fan coil units (FCU), Check ongoing validity of certificate online: or using: The present publication is drawn up by way of information only and does not constitute an offer binding upon Daikin Europe N.V. / Daikin Central Europe HandelsGmbH. Daikin Europe N.V. / Daikin Central Europe HandelsGmbH have compiled the content of this publication to the best of their knowledge. No express or implied warranty is given for the completeness, accuracy, reliability or fitness for particular purpose of its content and the products and services presented therein. Specifications are subject to change without prior notice. Daikin Europe N.V. / Daikin Central Europe HandelsGmbH explicitly rejects any liability for any direct or indirect damage, in the broadest sense, arising from or related to the use and/or interpretation of this publication. All content is copyrighted by Daikin Europe N.V. DACE Pricelist We reserve the right for printing errors & model changes 160