ULC S636 System. PolyPro. PolyPro Flex. Terminations

Transcription

1 PolyPro Polypropylene venting products for high-efficiency condensing appliance installations. Chloride free, environmentally safe. Listed to ULC-S636.

2 Specifications pplications PolyPro is a polypropylene vent pipe for use with NSI Category II and IV gas-burning appliances, including highefficiency water heaters, condensing boilers and warm air furnaces. Poly Pro is listed by Intertek to the ULC S636 standard in Canada as a Class II, II and IIC vent system suitable for exhaust temperatures up to 230 F / 110 C, and a maximum positive pressure of 15 in-w.c. Materials and Construction Rigid pipe constructed of 2.2mm (minimum) thick polypropylene. Flex is double-wall polypropylene. EPDM or Viton gaskets. Clearances 0 clearance to combustibles for exhaust temperatures up to 194 F / 90 C, and 0 clearance for vertical installations up to exhaust temperatures of 230 F / 110 C and ¼ / 6mm clearance to combustibles for horizontal installations at exhaust temperatures up to 230 F / 110 C. PolyPro concentric vent system components, including concentric Horizontal Termination and Vertical Termination, are listed at 0 clearance to combustibles for exhaust temperatures up to 230 F / 110 C. Diameters 2" (60mm), 3" (80mm), 4" (100mm), 5" (130mm), 6" (150mm), and 8" (200mm). Listings Listed with the appliance in the US, check with appliance manufacturer. Intertek / Warnock-Hersey listed to ULC-S636 Listed as a Class II, II, and IIC vent system. ULC S636 System. PolyPro PolyPro and PVC/CPVC PVC pipes are commonly used for venting water heaters, condensing boilers and warm air furnaces, yet PVC was never designed for such use. n environmentally safe and engineered alternative is PolyPro, for condensing gas appliances. Engineered for venting, it is 100% recyclable, and contains no toxic or carcinogenic materials, chlorides, or heavy metals. PolyPro does not release hazardous gases during combustion, and has been used safely throughout Europe for over fifteen years. Polypropylene has a higher operating temperature limit of 230 F/110 C (PVC is 149 F/65 C max and CPVC is 194 F/90 C). PolyPro is engineered with a corrosion-free, condensation management system. PolyPro Flex PolyPro Flex through Vent as a Chase. Retrofit venting for new, high-efficiency appliances When replacing a mid-efficiency appliance with a new condensing 90+ appliance, you can use the existing vent (any brand) as a chase for the new appliance with PolyPro. The perfect solution for utilizing the Vent already in place, just insert double-wall PolyPro Flex through the Vent pipe, utilizing the convenient pull cone and terminate the system with PolyPro s Skyline Vertical Termination Cap. t the other end is the unique Vent/PolyPro Support Cap, allowing for the connection of flex to rigid PolyPro lengths and elbows to finish the installation. Terminations DuraVent s concentric PolyPro terminations are lab tested to handle harsh weather and remain icicle free in freezing temperatures. ir circulation and weather conditions like rain, wind and ice have the potential to reduce the efficiency of a units performance and the operation of it's venting system. M&G DuraVent has designed its terminations for a tight, leak-free system that does not allow icicle formations. PolyPro complies with LEED credit IEQc4.1 on VOC limits. PolyPro is certified by CS International ISO 9001 Registered by GasTec. PolyPro is approved by the Massachusetts Plumbers oard. pproval code G DuraVent

3 PolyPro GreenVent Only Venting M&G DuraVent is dedicated to one thing...focusing on the design and manufacture of venting products. s experts in this industry, our team is passionate about creating innovative, quality products. We invest in equipment with the latest technology to develop and test venting products that are engineered to one standard, excellence. ll measuring equipment is calibrated to the same levels as used by testing agencies, and are compliant with ISO 17025, the testlaboratory standard. Wind Tunnel Laboratory The wind tunnel lab allows us to gather precise data with 270 degrees of measurement on terminations. ll data is analyzed for product performance under rigorous conditions before going to market. Rain Testing M&G labs test the vapor/moisture barrier of products by subjecting them to extreme rain and wind conditions. These tests are compliant with both the US and Canadian requirements, as well as the stringent European standards. Climate Testing M&G labs have developed a patented ice testing system in the climate room. Tests run to -4 F (-20 C). PolyPro terminations are engineered to remain icicle free. Commercial and OEM Product Development M&G DuraVent engineers are expertly skilled to develop venting components to OEM specs. To satisfy specific venting requirements, DuraVent has the experience to provide custom design, prototyping and testing of vent systems and components engineered to the demands of specific appliances. The most versatile system for venting boiler and tankless water heater appliances. ULC S636. The robust Duravent PolyPro Commercial system is easily configured for most any design layout of condensing appliances. This modular system consists of an extensive set of components allowing construction of a commercial vent system in no-time. Configurable For Most Common Designs In-line Installation ack to ack Installation Extension kits for both basic systems Fast Lightweight and designed for quick and easy assembly. Safe.no sharp metal edges. Clean..no corrosion of metals or chlorides. Sustainable corrosive condensate resistant and 100% recyclable. The PolyPro Commercial Difference vailable in 5in.(130mm), 6in.(150mm) and 8in. (200mm) diameter. For overpressure and under pressure systems. Designed for up to eight appliances. Number of appliances can be expanded utilizing extension components. Completely smooth inner wall for optimal flow performance. Components design for complete discharge of condensate. Design allows for system distance adjustment from the back of the appliance. Superior back flow valve design operates effectively with almost no flow restriction. Sizing services available to help in calculating required vent size DuraVent 284

4 Skyline Termination djustable Flashing Locking and Skyline Termination Elbow Horizontal Termination Kit Co-Linear dapter Locking and UV Resistant Elbow Locking and Elbow Wall Strap Pipe Length UV Resistant Wall Plate Locking and Single-Wall Pipe Wall Strap Pipe Length 45 Elbow ppliance dapter & dapter Connector ppliance dapter & dapter Connector Locking and (both set of pipes) ppliance dapter dapter Connector Vertical Horizontal Twin Pipe Elbow Termination Horizontal Twin Pipe Concentric Flex Chimney Cap Support racket Flex Through Chimney Locking and Female Flex dapter Flex Length Spacer Male Flex dapter Support Elbow Wall Plate Single-Wall Pipe Locking and 90º Elbow ppliance dapter dapter Connector Elbow Twin Pipe Termination Locking and Skyline Vertical Termination Flex Female dapter -Vent Storm Collar -Vent Flashing Double-wall PolyPro Flex -Vent Pipe ttic Insulation Shield Square Firestop Support Wall Strap Flex Male dapter -Vent /PolyPro Support Cap Wall Strap Elbow PolyPro pipe length Pipe Length djustable Pipe Length ppliance dapter & dapter Connector Flex Through vent as a chase dapter Connector ppliance dapter Horizontal elow Grade 285 DuraVent

5 Single-Wall Venting System PolyPro PolyPro Venting System Single-Wall Pipe Use to vent condensing appliances. 2 60mm of overlap at the joint. Listed to ULC-S636. Locking bands are required at all joint connec tions 2"-4" diameters. LENGTH Ø mm mm mm ORDER # STOCK # ORDER # STOCK # ORDER # STOCK # 2 60mm 2PPS PPS PPS mm 3PPS PPS PPS mm 4PPS PPS PPS mm 5PPS PPS PPS mm 6PPS PPS PPS mm mm ORDER # STOCK # ORDER # STOCK # 8 200mm 8PPS PPS lack UV Resistant Single-Wall Pipe LENGTH Ø Use to vent condensing appliances. 2 60mm of overlap at the joint. Listed to ULC-S636. Made of UV resistant polypropylene ORDER # STOCK # ORDER # STOCK # 2 60mm 2PPS PPS mm 3PPS PPS mm 4PPS PPS mm 6PPS PPS djustable Pipe Use to add length to straight length of PolyPro pipe. Slips over standard single-wall pipe length. 4 ½ 114mm of adjustment. djustable pipe not available in 8 200mm diameter mm 2PPS-VL mm 5PPS-VL mm 3PPS-VL mm 6PPS-VL mm 4PPS-VL Test Port 10 Ø Use to test for proper appliance operation without penetrating or disconnecting the vent wall. Install immediately above the appliance. 2 60mm 2PPS-TP mm 5PPS-TP mm 3PPS-TP mm 6PPS-TP mm 4PPS-TP mm 8PPS-TP DuraVent 286

6 PolyPro Single-Wall Venting System 45 Elbow Offsets around obstructions as needed. 2 60mm 2PPS-E mm 2 11/16 69mm 3 80mm 3PPS-E mm mm 4 100mm 4PPS-E /16 78mm 2 13/16 78mm 5 130mm 5PPS-E ¾" 95mm 3 4/5" 98mm 6 150mm 6PPS-E /5" 98mm 3 9/10" 101mm 8 200mm 8PPS-E /5" 111mm 5 2/5" 131mm lack UV Resistant 45 Elbow Offsets around obstructions as needed. Made of UV resistant polypropylene. May be used for terminations, order ird Guard Screen to protect opening. 2 60mm 2PPS-E mm 2 11/16 69mm 3 80mm 3PPS-E mm mm 4 100mm 4PPS-E /16 78mm 2 ½ 65mm 90 Elbow Offsets around obstructions as needed. 2 60mm 2PPS-E mm 4 100mm 3 80mm 3PPS-E mm mm 4 100mm 4PPS-E mm mm 5 130mm 5PPS-E /10" 169mm 5 9/10" 152mm 6 150mm 6PPS-E /5" 183mm 6 ½" 166mm 8 200mm 8PPS-E /10" 227mm 7 7/10" 195mm lack UV Resistant 90 Elbow Offsets around obstructions as needed. Made of UV resistant polypropylene. May be used for terminations, order ird Guard Screen to protect opening. 2 60mm 2PPS-E mm 4 100mm 3 80mm 3PPS-E mm mm 4 100mm 4PPS-E mm mm 287 DuraVent

7 Single-Wall Venting System PolyPro lack UV Resistant Extended 90 Elbow Made of UV resistant polypropylene. May be used for terminations, order ird Guard Screen to protect opening. 2 60mm 2PPS-E90E mm mm 3 80mm 3PPS-E90E ¼ 360mm mm 4 100mm 4PPS-E90E ¼ 360mm 16 ½ 420mm Condensate Drain 87º Use to properly manage corrosive condensates common with high efficiency gas appliances. Reference 8PPS-CD for 8" Tee Cap with integrated drain. 2 50mm 2PPS-CD mm 3 80mm 3PPS-CD mm 4 100mm 4PPS-CD mm 5 130mm 5PPS-CD " 180mm 6 150mm 6PPS-CD " 180mm Tee Cap Use cap on Tees, Condensate Drain or on other components where a cap is needed. 2 60mm 2PPS-C mm 5PPS-C mm 3PPS-C mm 6PPS-C mm 4PPS-C Tee Cap with Condensate Drain Use cap on Tees, Condensate Drain or on other components where a cap is needed mm 8PPS-CD Tee with Cap Use for a 90 offset or to combine connections. 8" diameter includes cap. 2 60mm 2PPS-T mm 3 80mm 3PPS-T mm 4 100mm 4PPS-T mm 5 130mm 5PPS-T " 280mm 6 150mm 6PPS-T " 280mm 8 200mm 8PPS-T /5" 350mm DuraVent 288

8 PolyPro Single-Wall Venting System lack UV Resistant Tee Use as a termination. Made of UV resistant polypropylene. Gasket not included. Order ird Guard Screen to protect opening. 2 60mm 2PPS-T mm 3 80mm 3PPS-T mm 4 100mm 4PPS-T mm lack UV Resistant Termination Tee *new product offering* Use as a termination. Manufactured with two female ends to accept ird Screen on both ends. Use bird screen to protect openings. Made of UV resistant polypropylene mm 6PPS-TT lack Wall Plate Use to trim wall penetration. Painted black metal with gasket. 2 60mm 2PPS-WP mm 3PPS-WP mm 4PPS-WP lack Wall Plate for Twin Pipes Use to trim wall penetration when using two pipes. Painted black metal with gasket. C C 2 60mm 2PPS-WPT mm 11 7/10" 297mm 8 ½" 216mm 3 80mm 3PPS-WPT mm 11 7/10" 297mm 8 ½" 216mm 4 100mm 4PPS-WPT mm 12 7/10" 323mm 8 ½" 216mm Tee with Drain Cap Use to manage condensates at the bottom of a vertical run. 2 60mm 2PPS-TCD mm 5PPS-TCD mm 3PPS-TCD mm 6PPS-TCD mm 4PPS-TCD mm 8PPS-TCD DuraVent

9 Single-Wall Venting System PolyPro Reducer Use to transition the vent system to a smaller diameter mm 3PPS-R mm mm 4PPS-R mm mm 5PPS-R /5" 193mm mm 6PPS-R ¾" 197mm mm 8PPS-R /10" 150mm Increaser Use to transition the vent system to a larger diameter. Install in vertical orientation. 2" - 3" 60-80mm 2PPS-X mm mm 3PPS-X mm mm 4PPS-X mm mm 5PPS-X mm mm 6PPS-X /10" 145mm ppliance dapter Stainless Steel to PolyPro*updated photo* Use to connect PolyPro vent system to an appliance outlet. Made of L29-4C with built-in locking band. 3 80mm 3PPS-D-M mm 4PPS-D-M ppliance dapter, PVC to PolyPro Use to connect rigid PolyPro pipe length to PVC/CPVC coupler, or appliance outlet. Must be used with dapter Connector for flue gas. 2 60mm 2PPS-D mm 3PPS-D mm 4PPS-D Male PVC to PolyPro Pipe dapter Use to connect PP vent system to an appliance outlet which accepts PVC pipe. 3 80mm 3PPS-03PVCM-3PPF mm 6PPS-06PVCM-6PPF mm 4PPS-04PVCM-4PPF mm 8PPS-08PVCM-8PPF DuraVent 290

10 PolyPro Single-Wall Venting System Over PVC to PolyPro Pipe dapter Use to connect PP to an appliance which has PVC pipe as the appliance outlet mm 5PPS-05PVCF-5PPF mm 6PPS-06PVCF-6PPF mm 8PPS-08PVCF-8PPF FasNSeal to PolyPro Pipe dapter Use to transition from FasNSeal vent system to PP vent system. 3 80mm FS-03M-2PPF mm FS-05M-5PPF mm FS-03M-3PPF mm FS-06M-6PPF mm FS-04M-4PPF mm FS-08M-8PPF PolyPro to FasNSeal Pipe dapter Use to transition from PP vent system to FasNSeal vent system. 3 80mm 3PPS-DM-03FNSF mm 6PPS-DM-06FNSF mm 4PPS-DM-04FNSF mm 8PPS-DM-08FNSF mm 5PPS-DM-05FNSF FasNSeal Universal to PolyPro Use to connect FasNSeal vent system to PP vent system mm FSU6-6PP mm FSU3-3PP dapter Connector 3⅝ Use to secure PolyPro pipe to PVC/CPVC coupler or appliance outlet. Universal size for 2-4 inch and 5-8 inch systems. M&G DuraVent requires it s use with flue gas applications, and recommend s it with air intake applications. 2-4 PPS-PC " - 8 PPS-PCL DuraVent

11 PPS-WSM Single-Wall Venting System PolyPro Wall Strap - metal Use to support for offsets, vertical and horizontal runs. Wall Strap legs can be rotated 360 to conceal screw. ccepts 1/4 all-thread. vailable in galvanized or stainless steel metals. Supporting Wall Straps are required at least every 10 feet 3 meters for vertical vent pipe sections, and horizontal or sloped sections of vent pipe require one supporting Wall Strap for each pipe section. GLVNIZED ORDER # STOCK # 2 60mm 2PPS-WSM /8" 92mm 4 7/8"" 124mm 3 80mm 3PPS-WSM mm mm 4 100mm 4PPS-WSM mm mm 5 130mm 5PPS-WSM mm mm 6 150mm 6PPS-WSM mm mm 8 200mm 8PPS-WSM mm mm STINLESS STEEL ORDER # STOCK # 2 60mm 2PPS-WSM-SS /8" 92mm 4 7/8" 124mm 3 80mm 3PPS-WSM-SS mm mm 4 100mm 4PPS-WSM-SS mm mm 5 130mm 5PPS-WSM-SS mm mm 6 150mm 6PPS-WSM-SS mm mm 8 200mm 8PPS-WSM-SS mm mm Locking and Use to secure two sections of pipe together. Required to comply with ULC-S636 listed installations for 2 to 4 diamaters. Locking ands optional for 5 diameter. 2 60mm 2PPS-L mm 4PPS-L mm 3PPS-L mm 5PPS-L Locking and Clamp *updated offering* Use to secure two sections of pipe together. Locking ands optional for 5-8" diameters. Use to secure two large diameter sections of PolyPro pipe together. Typically used in vertical installations. 2 60mm 2PPS-LC /8" 60mm 2 ½" 64mm 3 80mm 3PPS-LC /8" 80mm 2 ½" 64mm 4 100mm 4PPS-LC " 100mm 2 ½" 64mm 5 130mm 5PPS-LC /8" 130mm mm 6 150mm 6PPS-LC /8" 156mm mm 8 200mm 8PPS-LC /8" 207mm mm DuraVent 292

12 PolyPro Single-Wall Venting System Firestop Spacer Use when penetrating floor levels. Two piece design for easier installation. SINGLE-WLL PIPE ORDER # STOCK # 2 60mm 2PPS-FSS mm 7 178mm 3 80mm 3PPS-FSS mm 7 178mm 4 100mm 4PPS-FSS mm 7 178mm 5 130mm 5PPS-FSS mm mm 6 150mm 6PPS-FSS mm mm 8 200mm 8PPS-FSS mm mm CONCENTRIC PIPE ORDER # STOCK # 2 60mm 2PPS-FS " 178mm 8 ¾" 223mm 3 80mm 3PPS-FS /8" 200mm 9 7/8" 251mm 4 100mm 4PPS-FS /8" 200mm 9 7/8" 251mm Flat Roof Flashing 6 Use to weather-proof the penetration of vent pipe through the roof. For concentric pipe. 2 60mm 2PPS-FF /8 120mm 13 ¾ 350mm 3 80mm 3PPS-FF ½ 140mm mm 4 100mm 4PPS-FF ¼ 170mm mm 5 130mm 5PPS-FF ½" 140mm mm 6PPS-FF ¼" 160mm mm 8PPS-FF ¼" 210mm -- djustable Roof Flashing, 0/12-5/12 pitch 0 º - 25º Use to weather proof penetration of vent through the roof. For concentric pipe. Made of aluminum. djusts from 0-25 (0/12 to 5/12) ½ 2 x mm 2PPS-F mm 3 x mm 3PPS-F mm 4 x mm 4PPS-F mm 293 DuraVent

13 Single-Wall Venting System PolyPro djustable Roof Flashing, 5/12-12/12 pitch 25º - 45º Use to weather proof penetration of vent through the roof. For concentric pipe. Made of polypropylene. djusts from 25 to 45 (5/12 to 12/12). lack or terra-cotta. UV resistant. LCK ORDER # STOCK # 2 x mm 2PPS-F mm 3 x mm 3PPS-F mm 4 x mm 4PPS-F mm TERR-COTT ORDER # STOCK # 2 x mm 2PPS-F12-TC mm 3 x mm 3PPS-F12-TC mm 4 x mm 4PPS-F12-TC mm Twin Pipe Termination ø ø 8½ Use to terminate horizontally with two single wall PolyPro pipes for intake and exhaust. ir intakes between the black metal Exterior plates. lack UV resistant polypropylene exhaust nozzle with ird Guard Screen. Interior Wall Plate of paintable metal. 14 pipe lengths mm 2PPS-HTP mm 3PPS-HTP Single Horizontal Termination 8½ 8½ Use for horizontal terminations. Termination elbow and plate may be rotated. Termination Elbow is UV resistant black with ird Guard Screen. Interior Wall Plate paintable metal, Exterior Wall Plate painted black. 14 pipe length. 2 60mm 2PPS-HST mm 3PPS-HST Lochinvar Horizontal Termination Kit Use to adapt PolyPro to the Ipex 636 low profile termination. Kit includes 14 pipe welded to an adapter and metal backing plate. Check with appliance manufacturer for approval. (Ipex termination not included.) 2 60mm 2PPS-HLK mm mm 3 80mm 3PPS-HLK mm mm 4 100mm 4PPS-HLK mm mm DuraVent 294

14 PolyPro Single-Wall Venting System Vertical Termination Cap Kit - Concentric Use for concentric vertical terminations. Includes 2 appliance adapters, co-linear adapter. lack or terra-cotta cap. UV resistant. LCK ORDER # STOCK # 2 x 4 60 x 100mm 2PPS-VK mm mm 3 x 5 80 x 125mm 3PPS-VK mm mm 4 x x 150mm 4PPS-VK mm mm TERR-COTT ORDER # STOCK # 2 x 4 60 x 100mm 2PPS-VK-TC mm mm 3 x 5 80 x 125mm 3PPS-VK-TC mm mm 4 x x 150mm 4PPS-VK-TC mm mm Horizontal Termination Kit - Concentric MX LENGTH Use for concentric horizontal terminations. Includes 2 appliance adapters, white wall plate, white firestop, co-linear adapter. White, Termination with ird Guard Screen. UV resistant mm 2PPS-HK ¾ 350mm 3 x mm 3PPS-HK mm 4 x mm 4PPS-HK ¾ 350mm ird Guard Screen *updated offering* Use to protect venting system from birds and rodents. Position inside pipe in place of gasket. Stainless steel. Pack of mm 2PPS-G mm 4PPS-G mm 3PPS-G " 150mm 6PPS-G EPDM Replacement Gasket Use as a replacement gasket for rigid PolyPro products. Pack of 12. ORDER # # STOCK # ORDER # # STOCK # 2 60mm 2PPS-G mm 5PPS-G mm 3PPS-G mm 6PPS-G mm 4PPS-G mm 8PPS-G Viton Replacement Gasket Use as a gasket for oil fuel appliances. 2 60mm 2PPS-GV mm 5PPS-GV mm 3PPS-GV mm 6PPS-GV mm 4PPS-GV mm 8PPS-GV DuraVent

15 Commercial Venting Systems PolyPro PolyPro Commercial Venting System ir Intake Grill Use when exhausting flue gases through a PolyPro system and combustion air is supplied from within. DESCRIPTION C Single-Wall 3 80mm 3PPS-IG mm 3 ¼" 83mm -- Single-Wall 4 100mm 4PPS-IG mm 3 ¼" 83mm -- C Concentric Concentric 3 X 5 80mm X 130mm 3PPS-X5IG mm mm 5 129mm 4 x 6 100mm x 6 4PPS-X6IG mm mm 152mm 154mm ack Flow Valve 3⅛ 79 mm 8¼ 210 mm 9¼ 235 mm Use to regulate flow when there may be too much pressure in a system mm 4PPS-FV mm Siphon - Condensate Discharge with Trap 1¼ Use to capture condensates from system. Fits the Condensate Drain. ORDER # STOCK # PPS-SIPHON ranch Tee Use for inline configurations requiring cascading of appliances. 45 degree single and double feeders are 4 100mm. Cascade systems must be OEM pproved mm mm DESCRIPTION Single Feeder 6 180mm 6PPS-C mm Single Feeder 8 200mm 8PPS-C mm Double Feeder 6 180mm 6PPS-C mm Double Feeder 8 200mm 8PPS-C mm DuraVent 296

16 PolyPro Commercial Venting Systems Wye dapter dapts an 8" Line to Two 6" Lines 6 150mm 8 200mm 6 150mm 10⅛ 259mm Use to adapt from an 8 ranch Tee to two 6 lines. 45 degrees mm 8PPS-Y ¼ 312mm Variable Pitch Roof Flashing Use to weather-proof the penetration of vent pipe through the roof. For use with VTM. For pitches of 0/12-6/12. Made of galvalume mm FSVPF mm FSVPF mm FSVPF Support Clamp *updated description* Use to support vertical and horizontal runs using threaded rod. Recommended every 10 on vertical runs and every 6 in horizontals. For use with PolyPro Commercial Vent Lengths. Use additional Support Clamps as needed mm FSCL mm FSCL mm FSCL Storm Collar Use to create a weather tight seal between the pipe and flashing. For use with VTM mm FSCPP mm FSCPP mm FSCPP Horizontal Termination for Commercial Systems Use to terminate through-the-wall applications. L29-4C stainless steel. PolyPro pipe not included mm 5PPS-HST mm 6PPS-HST mm 8PPS-HST DuraVent

17 Flex Venting System PolyPro Vertical Termination for Commercial Systems Use to terminate through-the-roof applications. Made of metal mm 5PPS-VTM mm mm 6 150mm 6PPS-VTM mm mm 8 200mm 8PPS-VTM mm mm PolyPro Flex Venting System Flex Chimney Lining Kit Use for a vertical flex lining system. Includes black, UV resistant chimney cap, rigid flue vent, flex support bracket, 4 spacers in 3 & 4 kits, male and female flex adapters with gaskets, extended support elbow, wall plate and appliance adapter. Flex sold separately. 2 60mm 2PPS-FK mm 3PPS-FK mm 4PPS-FK mm 5PPS-FK Chimney Cap Use to vertically terminate a flex system. lack, UV resistant chimney cap with rigid steel flue vent. 2 60mm 2PPS-FCT mm 3PPS-FCT mm 4PPS-FCT mm 5PPS-FCT Vertical Flex Termination Cap Use to vertically terminate a flex system when using the -vent retrofit adapters. Includes male and female flex adapers and gaskets. lack, UV resistant. 2 60mm 2PPS-VFT ¾" 349mm 3 80mm 3PPS-VFT " 432mm DuraVent 298

18 90 PolyPro Flex Venting System -vent Retrofit dapters Use to retrofit any -vent pipe as a chase for PolyPro flex when an old appliance has been replaced with a new condensing 90+ appliance. Includes adapter to cap and flex/-vent support. For venting a single appliance (not for common-venting). See page 5 for more details. 2 60mm in a 4 100mm chase 2PPS-V mm in a 5 130mm chase 2PPS-V mm in a 5 130mm chase 3PPS-V mm in a 6 150mm chase 2PPS-V mm in a 6 150mm chase 3PPS-V Flex Length Use to line masonry chimneys that vent condensing appliances. Double-wall construction. Can be cut to precise length in the field. vailable in 25, 35 or 50 foot lengths. 5 diameter flex comes in rolls of 98 feet only. 25 FEET 35 FEET ORDER # STOCK # ORDER # STOCK # 2 60mm 2PPS-FLEX PPS-FLEX mm 3PPS-FLEX PPS-FLEX mm 4PPS-FLEX PPS-FLEX FEET 82 FEET ORDER # STOCK # ORDER # STOCK # 2 60mm 2PPS-FLEX mm 3PPS-FLEX mm - - 4PPS-FLEX FEET ORDER # STOCK # 5 130mm 5PPS-FLEX Support Elbow Use the support elbow to stabilize the vertical termination. Elbow has integrated support bracket. Elbow support must be ordered separately 5 130mm 5PPS-SE mm 8PPS-SE mm 6PPS-SE Universal Elbow Support racket Use to secure the Support Elbow or the Extended Support Elbow inside a masonry chimney. Heavy Duty. ORDER # STOCK# 2"-8" 60mm - 200mm PPS-SUP DuraVent

19 Flex Venting System PolyPro Flex dapter Kit Use to terminate PolyPro flex lining system. Includes two adpaters: one adapter for the base of the system and one for back to a rigid system. Flex gasket included. 3 80mm 3PPS-FS mm 4PPS-FS mm 5PPS-FS Flex Male dapter Use to connect PolyPro rigid pipe to PolyPro flex at the base of the system. Flex gasket included. 2 60mm 2PPS-FM mm 4PPS-FM mm 3PPS-FM mm 5PPS-FM Flex Female dapter Use to terminate PolyPro flex lining system back to a rigid system. Flex gasket included. 2 60mm 2PPS-FF mm 4PPS-FF mm 3PPS-FF mm 5PPS-FF Flex Coupler dapter Use to tightly connect one length of PolyPro flex to another. Flex gasket included. 2 60mm 2PPS-FC mm 4PPS-FC mm 3PPS-FC mm 5PPS-FC Flex Support racket Use to support PolyPro Flex from top of masonry chimney. ø 15 ¾ 2 60mm 2PPS-FS mm 4PPS-FS mm 3PPS-FS mm 5PPS-FS Spacer Use to center PolyPro flex. Universal for all diameters. Simple installation and ratchet adjustment. 3 & 4 use 3PPS-S. 2 60mm 2PPS-S mm 4PPS-S mm 3PPS-S DuraVent 300

20 PolyPro Flex Venting System Support Elbow, Extended Use the extended support elbow to stabilize the vertical termination. Extended horizontal length can be trimmed to size. Comes with integrated support bracket that is field connected to the metal Support SUP that is ordered separately. 2 60mm 2PPS-SE90X mm 3 80mm 3PPS-SE90X ¼ 565mm 4 100mm 4PPS-SE90X mm 5 130mm 5PPS-SE90X mm Flex Chimney Support Use to support the Support Elbow inside a masonry chimney. Comes with mounting hardware and pipe support clamp. 2 60mm 2PPS-SUP mm 4PPS-SUP mm 3PPS-SUP mm 5PPS-SUP Wall Plate Use to trim wall penetration. luminum. Can be painted mm square plate. 2 60mm 2PPS-WP mm 4PPS-WP mm 3PPS-WP mm 5PPS-WP Viton Replacement Gasket, Flex Use as a replacement gasket for PolyPro flex products. 2 60mm 2PPS-GF mm 4PPS-GF mm 3PPS-GF mm 5PPS-GF Flex Puller Use with the provided rope to guide PolyPro flex lengths down masonry chimney. 2 version snaps onto flex, 3-5 version twistlocks onto the male flex adapter. 2 60mm 2PPS-FP mm 4PPS-FP mm 3PPS-FP mm 5PPS-FP DuraVent