Cincinnati Industrial Auctioneers Inc.

Transcription

1 PUBLIC PLANT CLOSED Select Items To Be Offered Online See Instructions on Page 2 To Become a Qualified Bidder on the Internet PUBLIC 1997 Makino Model A77-A40 Two-Pallet Four-Axis Heavy Die Mold CNC Horizontal Machining Center 2007 Mazak Model VTC-300C Traveling Column CNC Vertical Machining Center INSTALLED 2000 EXCEPTIONAL OFFERING TWO COMPLETE PLANTS CNC TOOL & MOLD BUILDING FACILITY AND PLASTIC INJECTION MOLDING PLANT Featuring: (4) Mikron & Mazak CNC VMC s (New as 2007), (3) Makino CNC Mills (New as 2004), Makino CNC HMC, Mazak CNC Turning Center, (6) Mitsubishi & Charmilles EDM s, (15) Surface Grinders, (5) Lathes, Other Toolroom Machinery, Heat Treat, Inspection Equipment, Over (20) Plastic Injection Molding Machines by Toshiba, Mitsubishi & Van Dorn, Up to 500 Ton Capacity, Robots, Plastic Auxiliary, Pad Printers, Related Equipment, Cranes, Welders TOOL & MOLD AND PLASTICS DIVISIONS 125 Glenn Bridge Road & 149 Old Shoals Road Arden, North Carolina Just South of Asheville, NC Near Airport Thursday, March 17th Starting at 9:00 AM INSPECTION: WEDNESDAY, MARCH 16TH FROM 9:00 AM TO 4:00 PM AS ,000 RPM 2008 (20) Plastic Injection Molding Machines By Toshiba, Mitsubishi and Van Dorn Up To 500 Tons 2000 Mitsubishi Model FA-20 CNC Wire Cut EDM Mikron Model HSM-800 Bridge Type High Speed CNC Vertical Machining Center Brown & Sharpe Model Global Performance CNC Coordinate Measuring Machine SALE UNDER THE MANAGEMENT OF Cincinnati Industrial Auctioneers Inc DUNLAP ST., CINCINNATI, OHIO PHONE (513) / FAX (513) INTERNET: cia-auction.com for printable brochures, catalog, terms and proxy-bidding

2 ALLIANCE-CAROLINA TOOL & MOLD AND PLASTICS DIVISIONS / ARDEN, NORTH CAROLINA ,000 RPM 1997 INSTALLED 2000 Makino Model SNC-64-A15 High Speed CNC Vertical Machining Center AS 2004 Bank View (3) Makino KE-55 CNC Vertical Milling Machines Mazak Model AJV-25/405N Bridge Type CNC Vertical Machining Center Makino Model A77-A40 Two-Pallet Four-Axis Heavy Die Mold CNC Horizontal Machining Center HIGH SPEED CNC VMC Mikron Model HSM-800 Bridge Type High Speed CNC Vertical Machining Center; S/N H, Heidenhain Type ITNC-530 Control, 23-1/2 X 31-1/2 Meca Tool C Drilled & Tapped Table, X-Axis, Y-Axis, Z- Axis, 2,200 LB Max Work Piece Weight, HSK Type E40 Spindle, 30-Position ATC, 30,000 RPM, Steptec Type HVC-170-S-24-15/36-3F-HSK Spindle, Spindle Replaced Approx. 1 Year Ago by SPS Only 600 on Hours Since, Chip Conveyor, Burn WK-5805 Spindle Cooler, Pendant Control, Set Up for Probe (New 2003) (50) HSK Type E40 Holders of All Types Including; M&H 32.0 Mini Probe Head, Collet Type & Others CNC HMC & TOMBSTONES Makino Model A77-A40 Two-Pallet Four-Axis Heavy Die Mold CNC Horizontal Machining Center; S/N A97-484, Fanuc Pro 3 Control w/ Pendant,.001 Degree Full 4th Axis Pallet Rotation, (2) 24-3/4 X 24-3/4 Pallets, X-Axis, 29.5 Y- Axis, 30.3 Z-Axis, No. 50 Taper Spindle, 40-Position ATC, 18,000 RPM Spindle, Coolant Thru Spindle, Chip Conveyor, Overhead Wash Coolant, Purchased w/ Mold Makers Package, Scales, Tool Changer, Probe Capable, Oilmatic Spindle Coolers, New Ball Screw Approx. 1-1/2 Years Ago, Spindle Needs Replaced - Will Be Sold As-Is (New Not Installed Until 2000) (2) 20 X 20 X 34 H AND (2) 31 X 10 X 34 H Drilled & Tapped Tombstones CNC VMC S Mazak Model VTC-300C Traveling Column CNC Vertical Machining Center; S/N , Mazatrol 640MN Control, 30 X 78 T-Slotted Table, 65 X-Axis, 30 Y-Axis, 26 Z-Axis, No. 40 Taper Spindle, Spindle Speeds to 10,000 RPM, 24-Position ATC, 25 HP Spindle Motor, Chip Conveyor, Coolant System, Renishaw Tool Measurement Station (New 2007) Mazak Model VTC-160A Traveling Column CNC Vertical Machining Center; S/N , Mazak Fusion 640M Control, 16 X 36 T-Slotted Table, 22 X-Axis, 16 Y-Axis, 20 Z-Axis, No. 40 Taper Spindle, Spindle Speeds to 4,500 RPM, 24-Position ATC, Coolant System (New 12/1999) Mazak Model AJV-25/405N Bridge Type CNC Vertical Machining Center; S/N , Mazatrol M-32 Control, 21-1/2 X 48 T-Slotted Table, 39 X-Axis, 20 Y-Axis, 18 Z-Axis, No. 50 taper Spindle, Spindle Speeds to 3,150 RPM, 30-Position (Approx) ATC, Coolant System (New 1991) (2) Makino Model KE-55 CNC Vertical Milling Machines; S/N s KE-318/DA9P3 (1/1998) & KE342/DA9130 (6/1998), Fanuc Pro JN CNC Control, 14-3/4 X 31-1/2 Table, 21.7 X-Axis, 12.6 Y-Axis, 13.8 Z-Axis, No. 40 Taper Spindle, 4,000 RPM Spindle, Coolant System (New 1998) Makino Model KE-55 CNC Vertical Milling Machine; S/N KE3148/MM53829, Fanuc Pro JN CNC Control, 14-3/4 X 31-1/2 Table, 21.7 X-Axis, 12.6 Y-Axis, 13.8 Z-Axis, No. 40 Taper Spindle, 4,000 RPM Spindle, Coolant System (New 2004) Mazak Quickturn 28N-Univ Two-Axis CNC Turning Center ,000 RPM WEBCAST BIDDER INSTRUCTIONS All Internet bidders must register for this auction at at least 48-Hours Prior to the Sale Date, if you do not you will not be approved. All Internet bidders must Post a Deposit of Approx. 25% of Your Planned Spending Budget or $5, Minimum with Cincinnati Industrial Auctioneers in Order to be approved to Bid. Those who do Not Post the Deposit Will Not be Approved. Period. Only Major Items Will be Available for Online Bidding. Please refer to the Listing on for Available Online Items. 2 Techni-Drill Model CNC Gun Drill Mikron Model HSM-800 Bridge Type High Speed CNC Vertical Machining Center There is a 15% Buyer s Premium in Effect for All Online Purchases. We Highly Recommend that Potential Buyers Attend this Auction & Bid Live Onsite. This will give you the Ability to Inspect the Items & Fully Appreciate Their Condition, Along with Saving You 3% of the Buyer s Premium. No Last Minute Registrations will be accepted. Make Sure to Register & Post Your Deposit No Later than 48-Hours Prior to the Start of the Auction.

3 SALE DATE: THURSDAY, MARCH 17TH STARTING AT 9:00 AM /1999 Mazak Model VTC-160A Traveling Column CNC Vertical Machining Center 2000 Mazak Model VTC-300C Traveling Column CNC Vertical Machining Center CNC GRAPHITE MILL & 3R ROBOT Makino Model SNC-64-A15 High Speed CNC Vertical Machining Center; S/N , Fanuc Pro-A Control, 15-3/4 X 29 Table, 23.6 X-Axis, 15.7 Y-Axis, 15.7 Z-Axis, No. 40 Taper Spindle, Spindle Speeds to 20,000 RPM, 15-Position ATC, Daikin Inverter Spindle Cooler, Super Dusmic Dust Collector - To Be Sold Separate (New 1999) System 3R Workmaster Type K Position Automatic Tool Loading Robot; S/N 0011-V04-R070, 78-Position Rack, Control Cabinet w/ Pendant (New 1999) CNC GUN DRILL Techni-Drill Model CNC Gun Drill; S/N 7107, Techni-Drill CNC Control, 26 X 32 T-Slotted Table, 30 Approx. Stroke, 16 X-Axis, 10 Y-Axis, 25 Z-Axis, Spindle Speeds: RPM, Model Coolant System, 5 HP Spindle Motor (New 1/1996) Numerous Gun Drills in Sizes to 3/4 X 40 CNC TURNING CENTER Mazak Quickturn 28N-Univ Two-Axis CNC Turning Center; S/N , Mazatrol T32-2 Control, 10 Kitagawa Chuck, 20.8 Max Swing, 40 Max Between Centers, 7.87 X-Axis, 40 Z-Axis, Spindle Speeds to 3,000 RPM, 3.15 Spindle Bore, 22 KW Spindle Motor, 16-Position Turret, Tool Measure Arm, Tailstock, Chip Conveyor, Coolant (New 2/1994) CNC Lathe Tooling Consisting of; End Turret Tools w/ Indexable Drills, Boring Bars & Lathe Tools, Indexable OD & ID Tools, Indexable Drills, Chuck Jaws, Centers, Carbide Inserts & Other Related Items CNC WIRE EDM S Mitsubishi Model FA-20 CNC Wire Cut EDM; S/N21067, Mitsubishi WA-31 FA-1 Control / Power Supply; S/N (11/2000), 30 X 40 X 20 Tank Area, 24-1/2 X 31 Table Area, 19.6 X-Axis, 13.7 Y-Axis, 11.8 Z-Axis, AT Auto Threading Head, Dielectric Fluid System (New 2000) Mitsubishi Model DWC-90C CNC Wire Cut EDM; S/N 039D1162 (1/1993), Mitsubishi CNC Control, Power Supply, 16 X 20 Table, 13.7 X-Axis, 15.7 Y-Axis, 6.3 Z-Axis, Acu-Rite DRO, Dielectric Fluid System (New 1993) System 3R Model Table Clamping System; Other Various Table Components, Clamps & Hardware CNC DIE SINKER EDM S Mitsubishi Model EX-30 Four-Axis CNC Die Sinker EDM; S/N 06E30014, Mitsubishi EP-100E Power Supply & Control, 30 X 48 X 18 Tank Area, 27 X 38 Table, 27.5 X-Axis, 19.6 Y- Axis, 13.7 Z-Axis, System 3R C-Axis Rotary Ram Head, 24- Position 3R Robomatic ATC, Dielectric Fluid Tank, FP40B Booster Power Supply, Transformer (New 9/1996) Mitsubishi Model EX-8 Four-Axis CNC Die Sinker EDM; S/N 56E08238, Mitsubishi FP60E Power Supply & Control, 18 X 24 X 10 Tank Area, 14 X 20 T-Slotted Table, 11.7 X-Axis, 9.7 Y-Axis, 9.7 Z-Axis, System 3R C-Axis Rotary Ram, 16-Position 3R Robomatic ATC, Dielectric Fluid System (New 12/1996) (4) 12 X 18 AND (2) 8 X 15 Suburban Tool Permanent Magnetic Chucks EDM DRILL & SINKER Charmilles Model HD-30 CNC EDM Drill; S/N , Digital Keypad Control, 300 MM X 400 MM Worktable Dimensions, 300 MM X-Axis, 200 MM Y-Axis, 300 MM Z-Axis,.3-3 MM Hole Dia., 3/PE-380V Power Supply, Tank, 5 KVA Transformer (New 2004) Charmilles Model Form 20 Four-Axis Die Sinker EDM; S/N , 18 X 24 X 8 Tank Area, 12 X 16 Table, System 3R C-Axis Rotary Ram w/ Isocut Control System, Form 20 Power Supply, Dielectric Fluid System, Hiedenhain DRO (New 1994) EDM TOOLING Huge Quantity System 3R Sinker EDM Tooling Consisting of; Approx. 1,000 Straight Shank Graphite Holders, Cube Type & Square Graphite Holders & Machining Blocks, Small Button Type Attachments, Various Graphite, Hardware, Tools, (2) System 3R Tooling Cabinets, & Many Other Related Items HEAT SHRINK SYSTEM Seco EPB Model Easy Shrink 20 Shrink Fit System; S/N M , (3) Heating Stations, Digital Keypad Control MACHINE ACCESSORIES Large Quantity Machine Accessories and Tooling Consisting of; (200) No. 40 Taper Toolholders, (100) No. 50 Taper Toolholders Consisting of; Renishaw MP-700 Probe Head, Collet Type, Straight Drill & End Mill Type, Hypro Type HS-B Heat System, 12 X 17 Earth Chain Electric Magnetic Machining Chuck w/ Model EEPM-CI Control, (15) 6 Various Model Kurt Machine Vises, (6) 8 Kurt Machine Vises, 12 X 22 Heavy Duty Sine Table w/ Accessories, Large Quantity Morse Taper Drills to 2 Dia., 8 Haas T-Slotted 4th Axis Table w/ Servo Control, 12 X 12 & 12 X 20 Heavy Duty Sine Plates, Stambach Model CH-4802 Hand Beveller, (20) Various Size Angle Plates to 12 X 20, Hold Down Hardware, Cast Iron Parallels, Toolholder Carts, Flex Collets for Toolholders, R8 Collets & Toolholders, V-Blocks, Set-Up Blocks, Rotary Tables, Perishable And Indexable Tooling, Carbide Inserts, End Mills, Reamers, Taps, Drills Counterbores And Other Related Items System 3R Workmaster Type K Position Automatic Tool Loading Robot Mitsubishi Model FA-20 CNC Wire Cut EDM Mitsubishi Model EX-30 Four-Axis CNC Die Sinker EDM C-AXIS Mitsubishi Model EX-8 Four-Axis CNC Die Sinker EDM C-AXIS Charmilles Model HD- 30 CNC EDM Drill Partial View Huge Quantity System 3R EDM Tooling Including 1,000+ Straight Type Holders

4 ALLIANCE-CAROLINA TOOL & MOLD AND PLASTICS DIVISIONS / ARDEN, NORTH CAROLINA APPROX X 96 Mattison Hydraulic Surface Grinder 12 X 16 X 12 H (Approx.) Free-Standing Modular Panel Temperature Controlled Room Brown & Sharpe Model Global Performance CNC Coordinate Measuring Machine 4 12 X 24 Okamoto Model Accugar 124-N Hydraulic Surface Grinder (2) 6 X 18 Chevalier Model FSG-618M Hand Feed Surface Grinders Partial View Large Quantity Grinding Accessories Moore Model G-18 Precision Jig Grinder (6) 6 X 12 Okamoto Model Linear 6-12/14 Hand Feed Surface Grinders (2) 6 X 18 Parker Majestic Hand Feed Surface Grinders 26 /36 X 120 Summit Model 20-4X120 Gap Bed Geared Head Engine Lathe CMM / CLEAN ROOM & INSPECTION Brown & Sharpe Model Global Performance CNC Coordinate Measuring Machine; S/N , 34 X 65 Drilled & Tapped Black Granite Table, 27.6 X-Axis, 40 Y-Axis, 27.5 Z-Axis, Renishaw PH10MQ Probe, Renishaw PHC10-2 Probe Head Controller, PT-200 Probe Interface, Dell PC System, PC-DMIS Ca++ Software (If Transferable), Pendant Control (New 2008) 12 X 16 X 12 H (Approx.) Free-Standing Modular Panel Temperature Controlled Room; Air Ease HVAC System, Walk In Doors on 16 Walls, Windows on All Walls, Electric & Ethernet Outlets (New Approx. 2008) Other Misc. Inspection Tools Consisting of; Brown & Sharpe Tesahite 350 Model Digital Height Gauge; S/N 00021, OPG Model Qualifier 30 Optical Comparator; S/N , 8 X 32 Table, Di-Metric Precision Digital Keypad Control, Rockwell Model 4JR Hardness Tester, (2) Mitutoyo Toolmakers Microscopes, (15) Various Size & Style Surface Plates to 36 X 48 Some Free-Standing, (3) Mitutoyo Cadillac Height Gauges, Multi-Piece OD Mic Sets to 18, Vernier Calipers to 40, Pin Gauge Sets, Dial & Mic Type Bore Gauges, Gauge Blocks, Ring Gauges & Other Related Items SURFACE GRINDERS & ACCESSORIES 24 X 96 Mattison Hydraulic Surface Grinder; S/N 16897, Walker Interloc Electric Chuck, 6 W X 18 Dia. Wheel, Angular Dresser, 30 HP Spindle Motor, 10 HP Hydraulics Motor, Coolant 12 X 40 Thompson Model 3B Hydraulic Surface Grinder; S/N 3B , Electric Chuck, Wheel Dresser, 2 Wide Wheel, Coolant, PB Control 12 X 24 Okamoto Model Accugar 124-N Hydraulic Surface Grinder; S/N 7872, Late Model Walker Electric Chuck, Dresser, 1-1/2 Wide Wheel, Coolant, PB Control (2) 6 X 18 Chevalier Model FSG-618M Hand Feed Surface Grinders; S/N A , w/ Acu-Rite DRO & Manual Chuck, S/N A , w/ Acu-Rite DRO, Magnetic Chuck, Over the Wheel Dresser & Coolant Pump Partial View Large Quantity Machine Accessories (2) 6 X 18 Parker Majestic Hand Feed Surface Grinders; S/N s 5077-ZVE84 & 3517-ZBS78, Walker Electric Chuck, Acu-Rite DRO, PB Control, Coolant 6 X 18 Boyar Schultz Hand Feed Surface Grinder; S/N 1307, Manual Chuck (6) 6 X 12 Okamoto Model Linear 6-12/14 Hand Feed Surface Grinders; S/N s 3818, 3817, 3507, 3502, w/ Acu-Rite DRO s & Manual Chucks, S/N s 3887T & 21114, w/ Acu-Rite DRO s & Electric Chucks, Some w/ Coolant Tank & Pumps 6 X 12 Boyar Schultz Challenger Hand Feed Surface Grinder; S/N N/A, Manual Chuck, Acu-Rite DRO Grinding Accessories Consisting of; (2) Harig Grind All Attachments, (8) 6 X 6 Magnetic Sine Chucks, 6 X 18 Permanent Magnetic Sine Chuck, (5) 6 X 6 Magnetic Chucks, 3 X 3 Magnetic Sine Chucks, Newbould Model 202 Grinding Fixture, (2) Kuhn Schmidt Diamond Radius Dressers, Numerous Other Various Diamond Dressers, Harig 5C Spin Fixture, (3) 5C Collet Spin Fixtures, V-Blocks, Set-Up Blocks, Precision Vises, 6 X 12 Magnetic Chucks, & Other Related Items LATHES ALL TYPES 26 /36 X 120 Summit Model 20-4X120 Gap Bed Geared Head Engine Lathe; S/N , Taper Attachment, 14-Spindle Speeds: RPM, Inch & Metric Threading, 4-1/4 Hole Thru Spindle, Steady & Follow Rests, 12 3-Jaw Chuck, Jaw Chuck, 24 Faceplate, Coolant 16 X 60 Martin Model KM-40 Geared Head Engine Lathe; S/N 18619, 12-Spindle Speeds: RPM, Inch & Metric Threading, 7 6-Jaw Chuck, 12 3-Jaw & 4-Jaw Chucks, Steady Rest, Sokki DRO Hardinge Model DV-59 Precision Lathe; S/N N/A, Turret Toolpost, Cross Slide Post, Collet Chucks, Misc. Tooling Hardinge Model HSL-59 Speed Lathe; S/N SLC Lathe Tooling Consisting of; Large & Small Aloris HD Toolposts w/ Numerous Holders, Boring Bars, Lathe Tools, Chuck Jaws, Centers & Other Related Items MILLING MACHINES (3) 2 HP Bridgeport Variable Speed Vertical Milling Machines; S/N s , & , 9 X 48 Power Feed Tables, Acu-Rite Mile-Rate DRO s (Late) JIG MILL 3 Devlieg Spiramatic 3H-48 Jig Mill; S/N 8495, 35 X 48 Table, No. 40 Taper, 16-Spindle Speeds: 25-1,200 RPM, 48 Vertical Head Travel, PB Control, Coolant Devlieg Tooling Consisting of; (30) No. 40 Taper Holders, (2) 16 X 30 Devlieg 2-Pc. Cast Iron T-Slotted Angle Plates, (2) SPC Spindle Increaser Tool Holders, Hold Downs & Many Other Related Items JIG GRINDERS Moore Model G-18 Precision Jig Grinder; S/N 63203, 11 X 24 Table, PB Control Moore Precision Jig Grinder; S/N 7411, 10 X 19 Table, PB Control Jig Grinder Accessories Consisting of; (4) Moore Grinding Spindles w/ Boots, (2) Moore Toolmaker s Benches, 10 Dia. M&M Motorized Rotary Table, 10 X 12 Sine Plate, 10 Moore Precision Rotary Table, 6 X 6 Magnetic Sine Chuck, Positive Stop, 10 Pneumatic Rotary Table, Set-Up & Hold Down Tools MISC. TOOLROOM MACHINERY 200 Ton Dake Model Electric Hydraulic H-Frame Press; S/N , Elec-Draulic Control, 24 X 48

5 SALE DATE: THURSDAY, MARCH 17TH STARTING AT 9:00 AM Bank View 2007 Chevrolet Pick-Up and 2007 Ford Cargo Van Hansford Model 1020 Die Flipper; S/N 393, 24 X 42 Table 4 Arm X 12 Column Fosdick Sensitive Radial Arm Drill; S/N N/A, 24 X 48 Table, Coolant 12 X 30 Brown & Sharpe No. 13 Universal Cylindrical Grinder; s/n , Motorized Workhead, Various Chucks & Accessories (5) Various Flex Shaft Die Grinders & Related Consisting of; Gessewein Veramax DF, Foredom SR Type, (3) Foredom Units, 2-Door Storage Cabinets w/ Stones Other Misc. Toolroom Machinery Consisting of; S.O. Deckel Single Lip Tool Grinder, Sunnen Model MBB-1600 Precision Hone, Adrian Oliver Model 600 Drill Sharpener, Darex D.E. Drill Grinder STEEL & HEAT TREAT DEPARTMENT Approx. 20,000 LB Various Cut-Out Tool Steel & Bar Stock Inventory Lindberg Type 11-R A Natural Gas Fired Furnace; S/N 25482, 2000 Degree Max Temperature, Slide Up Front Door, Ipsen Atmosphere Generator, Honeywell Digital Temperature Control (2) C.I. Hayes Model PELR Natural Gas Fired Furnace; S/N 13141, Digital Controls Lindberg Type 73-EL Electric Fired Batch Oven; S/N , 850 Degree Max Temperature, 36 X 36 X 60 Chamber, Digital Temperature Control Ajax Model TS Electric Melting Furnace; S/N 3431, 10 KW, 38 Amp, 18 X 18 Tank Area MISC. MACHINERY 30 HP Sullair Model 2209/A Rotary Screw Horizontal Tank Mount Air Compressor; S/N , 125/135 PSIG (New 2007) 20 DoAll Model A Vertical Band Saw; S/N , Pneumatic Table Feed, Blade Welder / Grinder 20 Powermatic Model 87 Vertical Band Saw; S/N , Blade Welder / Grinder Marvel Model 8M8 Tilt Frame Vertical Band Saw; S/N Miller Dynasty 300DX Tig Welding Power Supply; Coolmate Cooler, Tig Leads (Late) Miller Maxstar 152 Arc Welder; PC-3000 Gtan Pulser & Arc Leads Other Misc. Machinery Consisting of; Anderson Shaft Straightening Press, DME 12-Zone Hot Runner Controller, 2 HP Dayton Cart Mounted Hydraulic Unit, 8 Sunstrand H.D. Belt Grinder, 6 Rockwell Belt Sander, 14 Kamro Heavy Duty Sliding Table Panel Saw, Kasto Model OS-320 Hack Saw, (5) D.E. Grinders of All Types And Many Other Related Items JIB CRANES & RELATED 1 Ton X 12 Arm Gorbel Free-Standing Jib Crane; 12 Under Arm, Electric Hoist (10) 1 Ton & 2 Ton X 10 & 12 Arm Column Mount Jib Cranes; Most w/ Budgit Electric Hoists IMPORTANT NOTICE This Auction Consists of Two Complete Facilities approx. 1/4 Mile Apart. The Tool & Mold Shop is housed in One Building at 125 Glenn Bridge Road and the Plastic Injection Molding Division in a Building at 149 Old Shoals Road. The Start of the Sale, Auction Office and Bidder Registration will be located at the Tool & Mold Shop on Glenn Bridge Rd., all Bidders Should Proceed there to Register Before going to the Plastics Division. Bank View 1995 Ford Flat Bed and 1995 Mitsubishi Box Truck (7) Monorail Hoists and Rails Consisting Of; 2 Ton Coffing Electric Chain Hoist w/ Power Trolley, 2 Ton P&H Electric Cable Hoist w/ Power Trolley, 2 Ton & 4 Ton Budgit Manual Chain Hoists, 1 Ton Coffing & Budgit Electric Chain Hoists, 100 & 60 Run Ceiling Hung I-Beam Monorails Large Quantity Misc. Lifting Equipment Consisting of; Lifting Eyes Standard & Swivel Type, Lifting Chains, Slings, Straps, Clamps & Other Related Items LIFT TRUCKS & RELATED (2) 7,250 LB Toyota Model 7FGCU35 LP Gas Solid Tire Lift Trucks; Standard Mast, Lever Shaft, Side Shift, ROPS (New 2006) 6,000 LB Hyster Model S60XM LP Gas Solid Tire Lift Truck; S/N D187V23894Y, Lever Shift, 3-Stage Mast, 189 Lift Height, 4- Way Valve, ROPS 4,000 LB Nissan Model CYB02L2SS Sit-Down Electric Lift Truck; S/N , 3-Stage Mast, 236 Max Lift 4,000 LB Yale Model L LP Gas Solid Tire Lift Truck; S/N , 2-Stage Mast Tennant Model 6200 Electric Floor Sweeper; 36 Volts, 1,231 LB Shipping Weight VEHICLES 2007 Chevrolet Silverado 1500 Four-Door Pick-Up Truck; Vin #2GCEC13C , Miles: 97, Ford E350 Cargo Van; Vin #1FTSE34LX7DB01548, Miles: 96, Ford 12 Flat Bed Truck; Vin #1FDNF80CXSVA35272, Miles: 193,000 Showing, 5-Speed, Diesel Engine 1995 Mitsubishi Fuso 16 Box Van Truck; Vin #JW6CEG1G5SL002203, Miles: 137,523, Allison Automatic Transmission, Diesel Engine SHOP EQUIPMENT Large Quantity Shop Equipment Consisting of; Yale Walk- Behind Electric Stacker, (6) 5,500 LB Little Mule Pallet Jacks, (60) 3 H X 3 W Heavy Duty Channel Iron Saw Horses, 50 X 70 Heavy Duty Cast Iron Slotted Table, 36 X 78 & 30 X 50 Heavy Duty Cast Iron Surface Plates, (50+) Heavy Duty 24 X 36 Steel Carts, (2) Lista Sliding Drawer Tooling Cabinets, (30+) 30 X 60 Maple Top Steel Leg Workbenches, Kennedy Workmate Toolbox / Portable Workbench, (5) Various Multi- Drawer Vidmar & Lista Cabinets, Hand & Power Tools, Mold Repair Parts & Hardware, Heavy Duty Welding Table, Welding Tools & Supplies, Heavy Duty Mold Storage Racks, Shipping Department, Heavy Duty C-Clamps, Spraytech Apex Airless Paint Sprayer, Ridgid Hand Threading Set, Hydraulic & Cable Lift Die Carts, Wax Dipping Pots, (50+) Rubber Fatigue Mats, Various Carts, Step & Extension Ladders, Shop Vac, Arbor Parts, Steel Storage Cabinets, Fireproof Cabinets, Oily Rag Cans, Self Dumping Hopper, Various Shop Furniture And Other Related Items BLUEPRINT PRINTER 36 Wide Xerox Model 6204 Wide Format Blueprint Printer; S/N N/A, w/ Dell Optiplex PC Hardinge Model DV-59 Precision Lathe (3) 2 HP Bridgeport Variable Speed Vertical Milling Machines 3 Devlieg Spiramatic 3H-48 Jig Mill Lindberg Type 11-R A Natural Gas Fired Furnace Ipsen Atmosphere Generator 200 Ton Dake Model Electric Hydraulic H-Frame Press Lindberg Type 73-EL Electric Fired Batch Oven HP Sullair Model 2209/A Rotary Screw Horizontal Tank Mount Air Compressor 5

6 ALLIANCE-CAROLINA TOOL & MOLD AND PLASTICS DIVISIONS / ARDEN, NORTH CAROLINA / Ton X 10.2 Oz Toshiba Model ISG150V10-5B Hydraulic Clamp Plastic Injection Molding Machine 500 Ton X 63 Oz. Toshiba Model IGS500V10-27 Hydraulic Clamp Plastic Injection Molding Machine Ton X 2.9 Oz. Toshiba Model ISG90V10-2B Hydraulic Clamp Plastic Injection Molding Machine Ton X 2.3 Oz. Toshiba Model ISP60V B Hydraulic Clamp Plastic Injection Molding Machine (2) 170 Ton X 15.9 Oz. Toshiba ISE170-9A Hydraulic Clamp Plastic Injection Molding Machines (2) 170 Ton X 9.3 Oz. Mitsubishi Model 170MSII-B Hydraulic Clamp Plastic Injection Molding Machines PLASTIC INJECTION MOLDING MACHINES & ROBOTS 500 Ton X 63 Oz. Toshiba Model IGS500V10-27 Hydraulic Clamp Plastic Injection Molding Machine; S/N , No. 22, Injectvisor V10 Control, 31 V X 34 H Tie Bar Space, 45 H Platen, 16 Min Max Daylight, Hydraulic Core Pull & Knock Out (New 7/1999) Star Automation Model TW-1200FMIII-3 Rectilinear Motion Robot; S/N 450MK-0220, Teach Pendant 500 Ton X 48 Oz. Toshiba Model ISE500 Hydraulic Clamp Plastic Injection Molding Machine; S/N , No. 10, Injectvisor 500 Control, 31 X 31 Tie Bar Space, 45 H Platen, 13.8 Min Max Daylight, Hydraulic Core Pull & K.O. (New 1987) 390 Ton X 41 Oz. Toshiba IGS390S10-19B Hydraulic Clamp Plastic Injection Molding Machine; S/N , No. B1-19, Injectvisor V10 Control, 28 X 28 Tie Bar Space, 40 H Platen, 11.9 Min Max Daylight, Hydraulic K.O. & CP (New 1995) Star Automation Model TW-1000FMIII-3 Rectilinear Motion Robot; S/N N/A, STEC 450 Pendant Control 390 Ton X 36 Oz. Mitsubishi Model 390MG-40 Hydraulic Clamp Plastic Injection Molding Machine; S/N G304180, No. 15, Digital & PB Control, 28 X 28 Tie Bar Space, 40 H Platen, 11.8 Min Max Daylight, Hydraulic Core Pull & K.O. (New 7/1989) 350 Ton X 30 Oz. Van Dorn Model 350RS-30F Toggle Clamp Plastic Injection Molding Machine; S/N 767, No. 3, Relay Controls Updated w/ Digital Zone Control Units, 27 X 27 Tie Bar Space, 41 H Platen, 8 Min Max Daylight, Hydraulic Core Pull & K.O. (New 1975) 250 Ton X 15.9 Oz. Toshiba Model ISE250N-9A Hydraulic Clamp Plastic Injection Molding Machine; S/N , No. 6, Injectvisor 300 Provisor Control, 22 X 22 Tie Bar Space, 32 H Platen, 9.4 Min Max. Daylight, Hydraulic CP & K.O. (New 1986) (2) 170 Ton X 15.9 Oz. Toshiba ISE170-9A Hydraulic Clamp Plastic Injection Molding Machines; S/N (New 1984), No. 4 Provisor Digital & PB Control, S/N (New 1986), No. 5, Injectvisor 300 Digital & PB Control, 20 X 20 Tie Bar Space, 28 H Platen, 7.5 Min Max Daylight, Hydraulic CP & K.O. (2) 170 Ton X 9.3 Oz. Mitsubishi Model 170MSII-B Hydraulic Clamp Plastic Injection Molding Machines; S/N 2S (New 1989), No. 13, Digital / PB Control, S/N 2S (New 1989), No. 14, Digital / PB Control, 20 X 20 Tie Bar Space, 22 H Platen, 8.7 Min Max Daylight, Hydraulic CP & K.O. 250 Ton X 15.9 Oz. Toshiba Model ISE250N-9A Hydraulic Clamp Plastic Injection Molding Machine 150 Ton X 10.2 Oz Toshiba Model ISG150V10-5B Hydraulic Clamp Plastic Injection Molding Machine; S/N732502, No. 20, Injectvisor V10 Control, 18 X 18 Tie Bar Space, 26 H Platen, 7.5 Min Max Daylight, Hydraulic K.O. & CP (New 1997) 150 Ton X 8 Oz. Van Dorn Model 150-RS-8F Toggle Clamp Plastic Injection Molding Machine; S/N 1372, No. 5-1, Relay Control w/ Updated Digital Zone Control, 15 H X 18 V Tie Bar Space, 26 H Platen, 6 Min Max. Daylight Hydraulic CP & K.O. (New 1979) 90 Ton X 2.9 Oz. Toshiba Model ISG90V10-2B Hydraulic Clamp Plastic Injection Molding Machine; S/N , No. 1-21, Injectvisor V10 Control, 14.8 X 14.8 Tie Bar Space, 22 H Platen, 6.7 Min Max Daylight, Hydraulic CP & K.O. (New 1996) 90 Ton X 4.8 Oz. Toshiba Model IS90PN-2B Hydraulic Clamp Plastic Injection Molding Machine; S/N , No. 2-11, Injectvisor 300 & Provisor PMC Control, 14 V X 16 H Tie Bar Space, 21 H Platen, 6-7 Min Max Daylight, Hydraulic CP & K.O. (New 1987) 85 Ton X 4.6 Oz. Toshiba Model ISE85-2B Hydraulic Clamp Plastic Injection Molding Machine; S/N , No. 3-2, Injectrol V & Provisor PMC Control, 14 X 14 Tie Bar Space, 21 H Platen, 6.7 Min Max. Daylight, Hydraulic CP & K.O. 85 Ton X 6.5 Oz. Engel Model EJ330/85 Toggle Clamp Plastic Injection Molding Machine; S/N , No. 4-17, EC88 Control, 13 V X 15 H Tie Bar Space, 20 H Platen, 5.9 Min Max. Daylight, Hydraulic K.O. & CP (New 1992) 75 Ton X 5 Oz. Van Dorn Model 75RS-5F Toggle Clamp Plastic Injection Molding Machine; S/N 75RS5F2261, No. 4-6, Relay Control w/ Updated Digital Zone Controls, 13 V X 16 V Tie Bar Space, 22 HP, 4 Min Max. Daylight, Hydraulic CP & K.O. (New 1989) 60 Ton X 2.3 Oz. Toshiba Model ISP60V B Hydraulic Clamp Plastic Injection Molding Machine; S/N , No. 2-24, Injectvisor V20 Control, 12 X 12 Tie Bar Space, 18 H Platen, 6.3 Min Max. Daylight, Hydraulic CP & K.O. (New 1998) 30 Ton X 1.8 Oz. Toshiba Model ISP30PV10-1 Hydraulic Clamp Plastic Injection Molding Machine; S/N , No. 1-23, Injectvisor V10 Control, 10 X 10 Tie Bar Space, 16 H Platen, 5.9 Min Max. Daylight, Hydraulic K.O. (New 1999) VERTICAL PLASTIC INJECTION MOLDING MACHINES 80 Ton X 6.7 Oz. Engel Model ES240/80VRO Rotary Table Vertical Plastic Injection Molding Machine; S/N , No. 5-16, EC88 Control, 38 Dia. 4-Station Rotary Table, Spectra Light Curtains, 13 X 15 Max. Mold Size, Hydraulic K.O. (New 1992) 75 Ton X 6 Oz. Newbury Model V6-76RS Shuttle Table Vertical Plastic Injection Molding Machine; S/N , No. 6-7, PB & Relay Control, 7 X 36 Table Area, 8 Min Max. Daylight, Hydraulic K.O. GRANULATORS (5) 15 HP Polymer Systems Model 1116 SPL Granulator; S/N & N/A, 460-Volt, SPL, , 21403F 14 HP Cumberland Model 3KN Granulator; S/N HP Polymers Systems Model 912SPC Granulator; S/N PL (4) 7.5 HP Polymer Systems Model 912SPL Granulators; S/N , 460-Volt, , , (3) 5 HP Cumberland Model 3KN Granulators; S/N 85593, 86576, & N/A 5 HP Polymer Systems Model 665PL Granulator; S/N N/A HP Whitman Model SJM2 Granulator; S/N W2827, Top Load (New 5/2008)

7 SALE DATE: THURSDAY, MARCH 17TH STARTING AT 9:00 AM Ton X 48 Oz. Toshiba Model ISE500 Hydraulic Clamp Plastic Injection Molding Machine DEHUMIDIFYING DRYERS (3) Una Dyn Model UDC-100 Dehumidifying Dryer & Hopper System; S/N , & Conair Model RS-101 Dehumidifying Dryer w/ Model CH26-14 Hopper Dri-Air Model HPD-3 Dehumidifying Dryer & Hopper System; S/N D12778 (Late Model) Dri-Air Model HPD-2 Dehumidifying Dryer & Hopper System; S/N S12777 (Late Model) (5) SHD Model SHD-25T Machine Mount Dehumidifying Dryer & Hopper SHD Model SHD-100T Machine Mount Dehumidifying Dryer & Hopper (2) PPE Comemore Machine Mount Dehumidifying Dryer & Hopper Matsui Model HD-100NR-OB Machine Mount Hopper Dryer TFW Chinese Model Machine Mount Dehumidifying Dryer & Hopper (3) Conair Cartridge Dryers ZONE CONTROLLERS (10) Hot Runner Zone Controllers Consisting of; Husky Model 9034; S/N , Husky Model 932; S/N , Athena 12-Zone, Mold Control Systems 12-Zone, Koma 12- Zone, ITC 8-Zone, DME 4-Zone, Koma 4-Zone, (3) PPC 2-Zone Hot Runner Zone Controllers MOLD TEMP CONTROLLERS (7) Whittman Tempro Model Basic 200 Mold Temperature Controllers (New 2007) (10) Sterlco Model M2B9412, S8412 & M29412 Mold Temperature Controllers CONVEYORS (5) Various Size Belt Type Portable Horizontal Motorized Conveyors in Sizes to 24 Wide & 20 Long (4) Crizaf 22 W X 10 L Aluminum Frame Portable Incline Conveyors Various Sections 12 W Skate Conveyor Approx. 100 CHILLER UNITS AEC Model DSA-5-CH Portable Chiller; S/N 83D167 AEC Model NXFW-5 Portable Chiller; S/N 98L0110 Cooling Tech Model MPCW-05 Portable Chiller; S/N , 5 HP (New 11/1993) Conair Portable Chiller COOLING TOWERS Cooling Tower Systems Consisting of; (1) Metal & (1) Fiberglass Cell, (2) Steel Pump Tanks PLASTICS SUPPORT EQUIPMENT Plastic Support Equipment Consisting of; Various Machine Mount Electric Loader Units, PPE Model DTS-5502 Dual 55-Gal. Drum Tumbler, Hydraulic Fluid Filter Pump, (Lot) Mold Hold Down Hardware, Various Water Hose, Manifolds, Electric Zone Controller Cables, Extension Cords, Hydraulic Hose, Hydraulic & Water Hose, Heater Bands, Misc. Parts & Other Related Items ULTRASONIC WELDERS Branson Model 2000 AE 2.5 Ultrasonic Welder; S/N WAB A (Late Model) Sonitek Model TS500 Thermal Press; S/N 50C-0476 (New 2000 s) (2) Branson Model 910iw Ultrasonic Welders; S/N N/A, KE10176B 390 Ton X 41 Oz. Toshiba IGS390S10-19B Hydraulic Clamp Plastic Injection Molding Machine Branson Model 834 Ultrasonic Welder Various Branson Power Supplies & Horns PAD PRINTERS (3) Reusch Model SP / 8110 Pad Printers; S/N , , , 10 X 17 Tables, Super Printer Digital Control Kent Model KIPP-200 Pad Printer; S/N (New 2004/2007) Kent Model KIPP-150E Pad Printer; S/N C , 8 X 13 Table, Digital Keypad Control (10/1995) Kent Model KIPP-100 Pad Printer; S/N 05-45, 4 X 11 Table Area, PB Control (New 12/2003) Franklin Hot Foil Stamping Press TOOLROOM MACHINERY (2) 2 HP Bridgeport Series I Variable Speed Vertical Milling Machines; S/N & N/A, 9 X 42 Table, ACU-Rite Dro 6 X 12 Boyar Schultz Challenger Hand Feed Surface Grinder; S/N 28627, Manual Chuck, ACU-Rite Dro Mold Shop Accessories Consisting of; Westhoff Horizontal Carbon Drill, 24 Fosdick Box Column Drill, (2) 6 Kurt Machine Vises, Bridgeport Vise, Mill Tooling, Standard & Swing Lifting Eyes, Heavy Duty Steel Tables, Double End Grinders & Sanders & Many Other Related Items BRIDGE CRANES (2) 3 Ton X 45 Approx. Span CMH P&H Single Girder Bottom Running Overhead Bridge Cranes; S/N & 49391, 3 Ton BR Chain Hoist, 6-Way Pendant - (2) Runs 120 Ceiling Hung Crane Rails -To Be Sold Separate (2) 1 Ton X 25 Approx. Span Acco Single Girder Bottom Running Overhead Bridge Cranes; (1) w/ 1 Ton CM Lodestar Electric Hoist, Manual Travel - 50 Run Ceiling Hung Crane Rail of Raceway-To Be Sold Separate 2 Ton X 23 Approx. Span Manufacturer Unknown Single Girder Bottom Running Overhead Bridge Crane; 2 Ton Dayton Bottom Running Electric Hoist LIFT TRUCKS & RELATED 4,000 Lb Hyster Model E40XL Electric Lift Truck; S/N C108V17136N, 202 Max Lift, Side Shaft 3,000 Lb Approx. Toyota Sit Down Electric Lift Truck; S/N N/A, Three-Stage, Side Shift 3,000 Lb Crown Model 30RCTT Stand Up Electric Lift Truck; S/N 85993, 196 Max Lift 80 Ton X 6.7 Oz. Engel Model ES240/80VRO Rotary Table Vertical Plastic Injection Molding Machine Partial View (2 of 16) Dehumidifying Dryers 390 Ton X 36 Oz. Mitsubishi Model 390MG-40 Hydraulic Clamp Plastic Injection Molding Machine Partial View (16) Granulators To 15 HP AS 2007 Partial View (17) Mold Temperature Controllers Partial View (4 of 7) Pad Printers 7

8 2008 (2) 3 Ton X 45 Approx. Span CMH P&H Single Girder Bottom Running Overhead Bridge Cranes (2) 7,250 LB Toyota Model 7FGCU35 LP Gas Solid Tire Lift Trucks (2) 3 Ton X 45 Approx. Span CMH P&H Single Girder Bottom Running Overhead Bridge Cranes 4/2007 6,000 LB Hyster Model S60XM LP Gas Solid Tire Lift Truck 14 KMT Model Velox 350 Mitre Base Cold Saw Mach 1 Model GL-3000 Rotary Pallet Stretch Wrap Machine CMM & INSPECTION TOOLS Mitutoyo Bright Apex 710 CNC Coordinate Measuring Machine; S/N , 38 X 64 Drilled & Tapped Granite Table, Renishaw PH9 Probe, 6-Sta. Probe Rack, PHC-9 Probe Head Controller, Tri-Star PC System 18 X 18 Rayco Drilled & Tapped Table w/ Set-Up Hardware Inspection Tools Consisting of; Arizona Instrument Computer Max- 2000XL Moisture Analyzer, Mitutoyo Tool Makers Microscope, Bausch & Lomb Microscope, Nikon Model V16 Profile Projector w/ Dro, 12 Mitutoyo Absolute Digimatic Height Gage, 36 X 48 GSP w/ Stand, Pin Gage Sets, 24 Mitutoyo Digimatic Height Gage, Indicator Bases & Many Other Related Items AIR COMPRESSOR & DRYER 30 HP Atlas Copco Model GA22 Rotary Screw Horizontal Tank Air Compressor; S/N WUX582520, 125 PSI, 118 CFM (New 3/2010) Sullair Model SR-175 Air Dryer; S/N MISC. MACHINERY Mach 1 Model GL-3000 Rotary Pallet Stretch Wrap Machine; S/N , 4,000 Lb Cap., 58 Dia. Table, 6 Approx. Max. Height (New 4/2007) 14 KMT Model Velox 350 Mitre Base Cold Saw; S/N N/A, Pneumatic Clamps 8 W X 6 D X 6 H Approx. Binks Walk-In Galvanized Panel Rear Draft Spray Booth (10) Custom Built Assembly Machines w/ Aluminum Components 1 Ton Danly Bench Top Air Press; S/N , 3 Stroke, 10 X 10 Die Space, 1 Belt Conveyor Feed 15 HP Fluid Energy Portable Hydraulic Unit SHOP EQUIPMENT Shop Equipment Consisting of; (50) Sections Various Size Pallet Rack; Most 42 X 9 X 16 H w/ Wire Decking, 5 X 5 Digital Platform Scale w/ Readout, Binks Pneumatic Paint Pot & Gun, Cable & Hydraulic Die Lifts, Maint. Crib w/ (10) Storage Cabinets of Misc. Parts, Gas Power Pressure Washer, Portable A-Frame Crane w/ Manual Hoist, Tape Shooters, Hand Staking Presses, Metro Racks, Pallet Trucks, Bench Top Digital Scales, Formica Top Assembly Tables, Shop Vacs, Pedestal Fans, Banding Outfits, Ladders, Fireproof Storage Cabinets, Trash Cans, Portable StepSets, Cabinets, Shelving, (20) Hand Trucks, Rubber Fatigue Mats, Misc. Power & Hand Tools, and Many Other Related Items Toyota and Hyster Electric Lift Trucks HP Atlas Copco Model GA22 Rotary Screw Horizontal Tank Air Compressor Partial View Branson and Sonitek Ultrasonic Welders Mitutoyo Bright Apex 710 CNC Coordinate Measuring Machine Branson Model 2000 AE 2.5 Ultrasonic Welder

9 PUBLIC PLANT CLOSED PUBLIC EXCEPTIONAL OFFERING TWO COMPLETE PLANTS CNC TOOL & MOLD BUILDING FACILITY AND PLASTIC INJECTION MOLDING PLANT Plant Closed Cincinnati Industrial Auctioneers Inc DUNLAP STREET CINCINNATI, OHIO Makino A77 CNC HMC (20) Injection Molders PRE-SORT FIRST CLASS U.S. POSTAGE PAID CINCINNATI, OHIO PERMIT NO FIRST CLASS MAIL! TOOL & MOLD AND PLASTICS DIVISIONS 125 Glenn Bridge Road & 149 Old Shoals Road Arden, North Carolina Just South of Asheville, NC Near Airport THURSDAY, MARCH 17TH STARTING AT 9:00 AM INSPECTION: Wednesday, March 16th from 9:00 AM 4:00 PM Brown (7) CNC VMC s (To 2007) & Sharpe (6) Wire & Sinker EDM s CMM Important Mail TO BE DIRECTED TO THE ATTENTION OF EXECUTIVE 1984 PERSONNEL IMPORTANT NOTICE This Auction Consists of Two Complete Facilities approx. 1/4 Mile Apart. The Tool & Mold Shop is housed in One Building at 125 Glenn Bridge Road and the Plastic Injection Molding Division in a Building at 149 Old Shoals Road. The Start of the Sale, Auction Office and Bidder Registration will be located at the Tool & Mold Shop on Glenn Bridge Rd., all Bidders Should Proceed there to Register Before going to the Plastics Division. PUBLIC Plant Closed TOOL & MOLD AND PLASTICS DIVISIONS 125 Glenn Bridge Road & 149 Old Shoals Road Arden, North Carolina Just South of Asheville, NC Near Airport IMPORTANT NOTICE: Although information has been obtained from sources deemed reliable, the auctioneer makes no warranty or guarantee, expressed or implied, as to the accuracy of the information herein contained. It is for this reason that buyers should avail themselves of the opportunity to make inspection prior to the sale. This brochure is intended to provide general information of the equipment being offered and is subject to errors, omissions, additions or deletions. Please check with the Auctioneer s Office for a final listing. Items offered may or may not necessarily be sold as described and/or photographed in this brochure. MAIL BIDS ACCEPTED WITH A 25% DEPOSIT PLANT CLOSED TERMS OF SALE All equipment described herein will be sold as is, where is to the highest bidder or bidders for cash in accordance with our regular terms and conditions of sale. Unless other satisfactory arrangements are made, a 25% deposit in cash, certified or cashier s check payable to Cincinnati Industrial Auctioneers, Inc., is required on all purchases. Firm and personal checks accepted only if accompanied by a letter from your bank guaranteeing your funds. All sales are subject to state and/or local taxes unless a signed exemption form is presented at the time of purchase. All balances are due at the conclusion of the sale. No merchandise may be removed while the sale is in progress. All bidders must comply with our Standard Terms of Sale, copies of which will be available at the sale site or can be obtained from our website. 12% buyer s premium in effect for this sale. AUCTIONEERS Cincinnati Industrial Auctioneers, Inc. License No Jeffrey L. Luggen License No PUBLIC DIRECTIONS Directions to Mold Shop: From I-26 Just South of Asheville, Exit at No. 40, Hwy. 280 North Towards Arden, Proceed North on Hwy. 280 for 1-1/2 Miles to Light at Old Shoals Road. Turn Left & Proceed 1/2 Mile to 4-Way Stop at Glenn Bridge Road. Turn Left & Proceed to Sale Site Almost Immediately on Left. Watch For Auction Parking Signs & Arrows. Directions from Main Plant to Plastics Plant: Turn Right out of Parking Lot to Proceed to Almost an Immediate 4-Way Stop at Old Shoals Rd. Turn Left and Proceed 1/2 Mile to Sale Site on Right. 12% ONSITE BUYERS PREMIUM 15% ONLINE BUYERS PREMIUM SALE UNDER THE MANAGEMENT OF Cincinnati Industrial Auctioneers Inc DUNLAP ST., CINCINNATI, OHIO PHONE (513) / FAX (513) INTERNET: cia-auction.com for printable brochures, catalog, terms and proxy-bidding