Pet blow Molding Machine 4KVT

Size: px

Start display at page:

Download "Pet blow Molding Machine 4KVT"

Rosanna Long
5 years ago
Views:

1 Pet blow Molding Machine 4KVT 1. TECHANICAL SPECIFICATION 2. SCOPE OF SUPPLY 3. TECHANICAL SPECIFICATIONS OF EQUIPMENTS 4. ADDITIONAL FEATURES 5. MATERIAL USED

2 APPLICATION- PET BOTTLES FOR WATER, JUICE, AND SODA ETC. OUTPUT RATE: BOTTLES/HR OUTPUT RATE MAY VARY DEPENDING ON BOTTLE CAPACITY & APPLICATION

3 TECHANICAL SPECIFICATION MACHINE UNIT ASBM -4C OUTPUT RATE Pcs/hr 4000/4400 MOULDING UNIT MOULD THICKNESS MAX. Mm 165 MOULD LENGTH MAX. Mm 350 VOLUME MAX ML 1000 NECK SIZE MAXIMUM Mm 30 NUMBER OF CAVITY 4 CAVITY CENTRE DISTANCE Mm 100 STRETCHING STROKE (DOUBLE) Mm CLAMPING UNIT CLAMPING SYSTEM MECHANICAL CLAMPING FORCE Ton 25 CYL. STROKE Mm 50 ELECTRICAL NUMBER OF IR HEATERS 6x4=24 IR HEATER SPEC. 415v,2 Kw TOTAL MACHINE POWER Kw 50 POWER WITH OTHER ACCESSORIES Kw 165 MACHINE CONSUMPTION LOAD Kw 65% GENERALS MACHINE LENGTH Mm 3350 MACHINE WIDTH Mm 1850 MACHINE HEIGHT mm 2000 MACHINE WEIGHT Ton 7 1.AIR COMPRESSOR HIGH PRESSURE Hp HIGH PRESSURE CFM Cfm 200 LOW PRESSURE Hp LOW PRESSURE CFM Cfm AIR DRYER HIGH PRESSURE cfm 200 LOW PRESSURE cfm CHILLER Tr 5 4.COOLING TOWER Tr 50 6.HEAVY DUTY SWITCH (for machine only) Amp 125

4 SCOPE OF SUPPLY PET STRETCH BLOW MOLDING MACHINE ONLINE BOTTLE EJECTION UNIT PREFORM LOADER UNIT ELECTRIC CONTROL PANEL

5 TECHANICAL SPECIFICATIONS & FEATURES OF EQUIPMENTS USED: LOADER UNIT MATERIAL USED: MILD STEEL BODY. MOTORS USED FOR LOADING,ROLLING & FEATURES: PREFORM DISTIBUTING PURPOSE. COMPACT, RHOBUST,FAST OPERATION AT A TIME 4 PREFORMS LOADING.

6 HYDRAULIC SYSTEM MATERIAL USED: HYDRAULIC SOLENOID VALVES,INDUCTION MOTORS.MAKE: YUKEN FEATURES: PROVIDE REQUIRED TONNAGE AFTER MOULD CLOSING WITHOUT LOSS OF PRESSURE FAST OPERATION

7 UNIQUE ONLINE BOTTLE EJECTION MATERIAL USED: PNEUMATIC CYLINDERS- MAKE: CAMOZZI (ITALY)/FESTO (GERMAN) GRIPPERS FOR HOLDING BOTTLES FEATURES: BOTTLE EJECTION AS SUITABLE FOR BOTTLE FILLING UNIT FAST OPERATION

DESIGNED FOR HEATING UNIFIRMITY ON PET PREFORMS LESS LOSS OF

8 INFRARED HEATING SYSTEM FEATURES: IR HEATING SYSTEM EMPLOYS IR TUBES COMBINED WITH PREFORM ROTATION DRIVEN BY MOTOR DESIGNED FOR HEATING UNIFIRMITY ON PET PREFORMS LESS LOSS OF HEAT TEMPERATURE CONTROLLER FOR MAINTAINING HEAT IN HEATER ZONES.

9 PNEUMATIC SYSTEM ITALY (CAMOZZI) & GERMAN (FESTO) PRODUCTS ARE USED IN PNEUMATIC SYSTEM SOLENOID VALVES, DOUBLE ACTING MAGNETIC CYLINDERS ETC.

10 ELECTRICAL CONTROL PANEL FEATURES: PLC CONTROL PANEL WITH DISPLAY FOR CONTROLLING THE MACHINE BUTTONS ARE PROVIDED FOR THE MANUAL CHECKING OF THE VARIOUS OPERATIONS. R Y B INDICATORS FOR ELECTRIC SUPPLY PHASE INDICATION. STANDARD ARRANGEMENT OF COMPONENTS IN CONTROL PANEL ELECTRICAL CONTROL PANEL

CHILLER CONNECTION FOR MOULD COOLING WHICH GIVES BETTER

11 MOULD SECTION FEATURES: FAST OPENING AND CLOSING OF THE MOULD HYDRAULIC SYSTEM FOR OPENING AND CLOSING OF MOULD. CHILLER CONNECTION FOR MOULD COOLING WHICH GIVES BETTER QUALITY OF BOTTLES HIGH QUALITY ALUMINIUM MOULD WITH UNIQUE POLYMER NECK.

PNUMATIC CYLINDERS CAMOZZI (ITALY)/FESTO (GERMAN 2.

12 ADDITIONAL FEATURES 1. SINGLE ROW LINEAR CONVEYOR INDEXING PROVIDED FOR FAST OPERATION MATERIAL USED: PNUMATIC CYLINDERS CAMOZZI (ITALY)/FESTO (GERMAN 2. DOUBLE STRETCHING UNIT MATERIAL USED: PNEUMATIC CYLINDERS- CAMOZZI (ITALY)/FESTO (GERMAN) FEATURES: DESIGN FOR FAST OPERATION WITH BETTER QUALITY BOTTLE OUTPUT

13 3. MOULD BOTTOM UNIT IS DESIGNED WITH SINGLE PLATE BOTTOM FITTING WHICH ENABLES EASY MOULD CHANGING. VACUUM RELAEASE EJECTION FOR MOULD BOTTOM BASE

14 MATERIAL USED: PNEUMATIC: DOUBLE ACTING MAGNETIC CYLINDERS & FITTINGS: CAMOZZI (ITALY)/FESTO (GERMAN) SOLENOID VALVES: CAMOZZI (ITALY)/FESTO (GERMAN) FILTER, LUBRICATOR, REGULATOR: CAMOZZI (ITALY)/FESTO (GERMAN) ELECTRICAL: MCCB (MAINS)-125 A: L & T MCB USED: SIEMENS VFD (L SERIES): DELTA PLC WITH DISPLAY: SARIKA TECHNOLOGY (INDIA) SOLID STATE RELAYS: SARIKA TECHNOLOGY (INDIA) IR SHORT WAVE HEATERS: ANUPAM HEATERS & CONTROLS PVT LTD. (INDIA) DC GEARED MOTOR: BONFIGLIOLI ELECTRIC CABLES: POLYCAB HYDRAULIC: HYDRAULIC CYLINDERS, HYDRAULIC BLOCK: INHOUSE HYDRAULIC SOLENOID VALVES, HYDRAULIC PUMP: YUKEN INDIA RUBBER HOSE PIPE: PARKER HYDRAULIC MOTOR: HINDUSTAN ELECTIC (INDIA) MECHANICAL: ALUMINIUM PREFORM HOLDERS, MS MOULD PLATEN, GUN METAL BUSH, DIAMOND CHAIN, CAST IRON CHAIN SPOCKET, MS CHROME SHAFT, MS PIPE, MS CHANNEL MS MACHINE BODY, SS REFLECTOR SHEET, ALUMINIUM COOLING RAMP, MS AIR TANK SS BALL VALVE: INHOUSE

Semi Auto Bottle-blowing Machine Mode: JND-880

Semi Auto Bottle-blowing Machine Mode: JND-880 (Blow PET bottle size from 100ml to 2500ml bottles) Option 1: one blowing machine with one heating oven (Production Capacity per hour: 0.1-2.5L: 850pcs, 3-5L: