SHANGHAI ZHONGDA WINCOME CO.,LTD UPWARDS BLOWN MACHINES SETS CONFIGURATION
|
|
- Ronald Cook
- 5 years ago
- Views:
Transcription
1 SHANGHAI ZHONGDA WINCOME CO.,LTD MFG OF PVC SHRINK FILM & FILM MACHINERY Add: TOWER A ZHONGDA PLAZA HANGZHOU CHINA Tel: 086(57) service@zhongdafilm.com Fax: 086(57) UPWARDS BLOWN MACHINES SETS CONFIGURATION WITH UPPER ROTATING - ROLLING PART ROTATING & WATER TANK HOISTING FOR PVC SHRINK FILM-HIGH QUALITY PRINTING GRADE A. Extruding Section:. Electric Apparatus: Frequency Converting Motor with ABB controlling transducer; Fuji Command Switches; RKC Temperature controlling Meter; Siemens Contactor; Circuit Breaker; Thermostat; Yangming Meters 2. Machinery : Hard Tooth Surface Gear Box; Screw and Screw Barrel(made from 38 Chrome CrMoAl Alloy Steel Nitride); Heated by Cast Aluminum Heater, Auto-Controlled by Temperature Meter, and with Wind Cooling System. Associated with Hopper of material. B. Die and Wind Ring. Die: made from superb Mirror Steel(stainless steel) 2. Wind Ring: Cast Aluminum big Ring, Adjustable Wind Volume and equipped with Blower and Drum C. Auxiliary section Original Film come out from Die, go through the small steel clamp Water Tank- Water Mould-Big Traction-Rolling. Traction: Each set of Traction composed by one rubber roller and one steel roller, run through a drawing roll connected by chain with Gear Box, speed controlled by Frequency Converting Motor with ABB controlling transducer. 2. Water Tank: Welded by Stainless Steel of thickness 5mm, added Insulating layer and temperature controlled by Temperature Meter. The couple of roller inside the water Tank is controlled by Electric Motor. 3. Shaping Water Mold: Tank interior is Stainless Steel, outside is composed by Steel Plate 4. Broached Groove shaping Water Mould: adapted for Dewatered Film shaping.
2 5. Rolling: Inflatable axle with two-position rolling, rolling tension controlled by torque motor. D. Auxiliary machine for back traction with Up-Rotating Back traction with Up-Rotating----With the stationary mold while it is rotating when the film drawn after it going through the water tank. Two Up and down Rotary Table(fluted disc) with steel ball between them 2. Run by Double Cycloid reducer 3. Associated with Hoisting machines that can put down the film rolls. 4. the water tank is lifting adjusted. E. Main Characteristic The main characteristic of this new modified machine: Film by back traction and UP-rotative after it is shaped in specialized water mould, with this way it eliminated exposed rib phenomenon but with excellent flatness and linearity. Its advance has been in the first level in the same Blown Industry. F. Styles of UPPER ROTATING UPWARDS BLOWN MACHINES # Style-55 Extruder quantity: 50-60KG/hour, mainly produce width mm # Style-65 Extruder quantity: 60-80KG/hour, mainly produce width mm # Style-75 Extruder quantity: 80-00KG/hour, mainly produce width mm MACHINERY ENGINEERING DEPARTMENT SHANGHAI ZHONGDA WINCOME CO.,LTD
3 PVC UPWARDS BLOWN MACHINE SJ75-SMX480 WITH UPPER ROTATING - ROLLING PART ROTATING & WATER TANK HOISTING ITEM DETAILED STANDARD CONFIGURATION COMPONENTS UNIT QUANTITY 一 MAINFRAME 75*29KB Frequency converting motor 2 Hard Tooth Surface Gear Box SPECIFICATION 6: 55KW Reduction ratio: 3 Screw barrel () dia:75mm 4 Heating and cooling method for barrel (2) length-dia ratio:29: (3) compression ratio:2.5: () Al-clamp ferrule (2) Wind cooling system (3) Heating plate power:: 2KW 2 5sections set set Set Set 5 hopper mm set mixing 0.25KW motor 5 5 Set 6 Inlet cable VV3*70+*25 piece 7 Cooling for Gear Inner dia: 20mm line 2 Box flexible hose 二 machine head 8 die ()die dia.:50mm set 0 REMARK 9 Wind cooling system ( ) air blower: set 6.5KW (2)air ring set (3)air drum suit 0 Heating power ( ) mouth mold.5kw
4 三 assistant partsmx300 8 First haulage 9 Second haulage (water tank) 0 third haulage (2)bottom mold:.3kw (3)elbow::.0KW ( ) steel roller/rubber roller suit ( 2 ) manual set (3)driving motor: 3.0kw set transducer ( 4 ) Inverted V set shape stainless steel rollers ( ) steel suit roller/rubber roller ( 2 ) manual set (3)driving motor: set transducer 3.0KW (4)stainless steel set water tank (5)heating pipes 6 4KW ( ) steel set roller/rubber roller ( 2 ) manual suit (3)driving motor: set transducer 5.5KW (4) rotating motor set 0.75KW ( 5 ) Inverted V set shape stainless steel clam (6) top haulage Set torque motor 0 N M
5 Rolling part 三 electric cabinet 2 transducer 3 Temperature-controlled meter 4 Alternating contactor ampere meter switch etc. ( ) Inflatable axle roller ( 2 ) torque motor.50n M suit 2 set 2 () 3KW set 2 FUJI 0.75KW set (2) 5.5KW set FUJI (3) 55KW set FUJI set 6 Whole machine MACHINERY ENGINEERING DEPARTMENT SHANGHAI ZHONGDA WINCOME CO.,LTD
Rigid Sheet Extrusion Line Rigid Sheet Extrusion Line Feature :
Rigid Sheet Extrusion Line Rigid Sheet Extrusion Line Feature : 1. Extruder is driven by AC Inverter duty motor, with excellent efficiency and lowest power consumption. 2. Extruder hopper with low-level
More informationSR10. Rotative blowing for large mass productionof packagings from 0,1 L to 0,75 L
SR10 Rotative blowing for large mass productionof packagings from 0,1 L to 0,75 L SR10 PRODUCTION : Maxi Dimensions : Closing force : 0,7 T Volume : 750 cm3 Height : 195 mm Diameter : 100 mm MAXIMUM USUAL
More informationSR4. Rotative blowing for large mass productionof packagings from 0,1 L to 1 L
SR4 Rotative blowing for large mass productionof packagings from 0,1 L to 1 L SR4 PRODUCTION : Maxi Dimensions : Closing force : 1 T Volume : 2000 cm3 Height : 320 mm Diameter : 100 mm MAXIMUM USUAL DIMENSIONS
More informationMODEL SP2 w.w mm
Officina Meccanica Carding sets and carding machines producers since 1947 Via S.M. di Campagnate, 14 13900 - BIELLA (BI) - ITALY tel. +39-015-401755 fax +39-015-8492807 www.ramellapietro.com e-mail ramella@ramellapietro.com
More informationZhangjiagang Golden Far East Machinery Co., Ltd
Zhangjiagang Golden Far East Machinery Co., Ltd Golden Far East Machinery Co., Ltd (CGFE) is specialized in the research and manufacture of pipe production line, profile production line, plate extruding
More informationPROJECT REPORT. HYT 4 Color Flexo graphic Printing Machine
RADIANCE INDIA 115 B Empire State Building, Ring Road Surat-395002 (Guj) INDIA Mobil :- 919687611676, 02616642006 Email id :-info@radianceindia.co Web site:- www.radianceindia.co PROJECT REPORT HYT 4 Color
More informationHaitian MarsⅡSeries. Haitian Mars. Series
Haitian MarsⅡSeries HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 level 11 Metroplaza Tower 3 Hing fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY CO.,LTD.
More informationBALE BREAKER AND OPENERS
BALE BREAKER AND OPENERS 13 Automatic Bale Plucker is used to mechanically strip fibres from pressed bales and automatically drop the fibre on to the feed table of the opening machinery at the beginning
More information1.6M PP SPUNBOND NONWOVEN PRODUCTION LINE
JINGCHENG INDIA Unit Price of Model FM-1600 SPUN BONDED NON-WOVEN PRODUCTION LINE: US$ 2,90,000.00 per set 1.. Packing: Wooden/open Cases Packing 2. Terms of Delivery: 120 days upon receipt of the prepayment
More informationشرکت حامیان صنعت کیمیا
شرکت حامیان صنعت کیمیا 200) تا 250 kg چینی) خط تولید ظروف یکبار مصرف گیاهی یک خط کامل تولید ورق با مواد نشاسته براي تولید ظروف یکبار مصرف گیاهی 1) جریان مواد فرمینگ وکیوم کستروژن ورق گرانول ساز اختلاط
More informationZhangjiagang Haibin Machinery Co.,Ltd
Zhangjiagang Haibin Machinery Co.,Ltd Zhangjiagang Haibin Machinery Co.,Ltd is located in the beautiful national sanitation city, Zhangjiagang. The company is adjacent to Shanghai on the east and Nanjing
More informationMIXOMAT C Tilting drum blender for l containers
MIXOMAT C Tilting drum blender for 100 400 l containers GENERAL REMARKS MIXOMAT C type drum blenders are available in two electrically tilting versions: MIXOMAT C-SE: Economic version with tilting housing,
More informationPELLET MILL. construction s prescriptions and safety. Besides, Nova Pellet S.r.l. has obtained in 2007 the Italian
PELLET MILL N-MIDI pellet mill machine is projected and manufactured in accordance with CE norm about construction s prescriptions and safety. Besides, Nova Pellet S.r.l. has obtained in 2007 the Italian
More informationRoll Heated Flatwork Finisher
Roll Heated Flatwork Finisher 20 Inch (500 mm) Roll Heated Models Refer to Page 3 for Model Numbers Parts FWF1N_1300577 www.alliancelaundry.com Part No. 1300577R14 January 2018 Table of Contents Title
More information2.2 Drawing and Parts List
2.2 Drawing and Parts List 2.2.1 Structural Drawing (SHD-20U~750U) Names of Parts: 1. Main switch 2. Insulated layer 3. Blower 4. Material storage tank 5. Electric heating box 6. Control box 7. Overheat
More informationDRI-AIR INDUSTRIES, INC. AHM-1C HOPPER MOUNT DRYER OPERATING MANUAL
AHM-1C HOPPER MOUNT DRYER OPERATING MANUAL Page 1 DRI-AIR INDUSTRIES, INC. 16 THOMPSON ROAD P.O. BOX 1020 EAST WINDSOR, CT 06088-1020 Tel. (860) 627-5110 FAX (860) 623-4477 Internet http://www.dri-air.com
More informationLaboratory Twin-Screw Kneader Modular design easy to use versatile in application
Laboratory machines for the processing of polymers Laboratory Twin-Screw Kneader Modular design easy to use versatile in application ZK 25 ZK 35 ZK-D The flexible laboratory machine for co-rotation and
More information+91-8048718892 H. K. Industries http://www.hikonindia.org/ We at, "Hikon" are well known extrusion plants manufacturer in India. Our range is highly recognized and appreciated by the clients across the
More information300kg/hr PP PE film washing line
MODELO: VM-LAVFIL300 LAVADORA, SECADORA, MOLEDORA DE POLIETILENO Project name Summarize 1. Electricity power use :440V,60Hz,3phase 2. Material: waste PP PE film, PP woven bag and etc 3. Final size of scraps:
More informationMIXOMAT C Tilting drum blender for 100 to 400 l containers
MIXOMAT C MIXOMAT C Tilting drum blender for 100 to 400 l containers GENERAL REMARKS MIXOMAT C type drum blenders are available in two electrically tilting versions: MIXOMAT C-SE: Economic version with
More informationBEIER MACHINERY SRL-Z MIXING UNIT BEIER MACHINERY JIANGSU BEIER MACHINERY CO., LTD SUZHOU BESTAR BLOW MOLDING TECHNOLOGY CO.
BEIER MACHINERY JIANGSU BEIER MACHINERY CO., LTD SUZHOU BESTAR BLOW MOLDING TECHNOLOGY CO., LTD FT1705172 SRL-Z800/ 2000L Mixing Unit Instruction Book Page 1 of 11 Preface Thank you for using our product,
More informationLDDC Series Double-Deck Drum Pre-cleaner. Instruction Manual LAMBTON MACHINERY(ZHENGZHOU)CO. LTD
LDDC Series Double-Deck Drum Pre-cleaner Instruction Manual LAMBTON MACHINERY(ZHENGZHOU)CO. LTD. 2015.08 Index Double-Deck Drum Pre-cleaner... 1 Instruction Manual... 1 Ⅰ. General Introduction... 3 Ⅱ.
More informationPREMIER SERIES BY P1255RBL-18 P2339RBL-18
PREMIER SERIES BY P1255RBL-18 P2339RBL-18 P2339RBL-18 P1255RBL-18 P2339RBL- P1255RB- P2339RBL- 1. P2339RBL 18 Machine casting components Line Part Number Description Qt. Notes 1 300 1002 Machine
More informationDRI-AIR INDUSTRIES, INC. AHM & HPHM 2-4 HOPPER MOUNT DRYERS OPERATING MANUAL
AHM & HPHM 24 HOPPER MOUNT DRYERS OPERATING MANUAL OPERATING MANUAL AHM/HPHM 24 HOPPER MOUNT DRYERS Page 1 DRIAIR INDUSTRIES, INC. 16 THOMPSON ROAD P.O. BOX 1020 EAST WINDSOR, CT 060881020 Tel. (860) 6275110
More informationHaitian IapetusⅡSeries
Haitian IapetusⅡSeries HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 level 11 Metroplaza Tower 2 223 Hing fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com NINGBO HAITIAN HUAYUAN MACHINERY
More informationINDIAN PLASTICS INSTITUTE CHENNAI CHAPTER DEVELOPMENTS IN MACHINERY FOR FILM MANUFACTURING
INDIAN PLASTICS INSTITUTE CHENNAI CHAPTER One Day Seminar on FLEXIBLE PLASTICS FILM LAMINATES 20th September 2004 - Hotel Savera DEVELOPMENTS IN MACHINERY FOR FILM MANUFACTURING Presented by : Shri I Chakravarthy
More informationHAND-OPERATED GREASE PUMPS 181
HAND-OPERATED GREASE PUMPS 181 182 MANUAL GREASE PUMPS Art.68012 Art.68113 Pedal and hand-operated portable grease pumps. For practical and safe greasing anywhere, and on any motor vehicle and/or machinery.
More informationDRI-AIR INDUSTRIES, INC. AHM-1B HOPPER MOUNT DRYER OPERATING MANUAL
AHM-1B HOPPER MOUNT DRYER OPERATING MANUAL Page 1 DRI-AIR INDUSTRIES, INC. 16 THOMPSON ROAD P.O. BOX 1020 EAST WINDSOR, CT 06088-1020 Tel. (860) 627-5110 FAX (860) 623-4477 Internet http://www.dri-air.com
More informationPELLET MILL. developed properly for pellet production and all technologies and mechanical solutions are chosen to
PELLET MILL N-ECO pellet mill machine is projected and manufactured in accordance with CE norm about construction s prescriptions and safety. With N-ECO you will save money and get lower pellet production
More informationCOMPOUNDING & REPROCESSING EXTRUSION SYSTEMS
COMPOUNDING & REPROCESSING EXTRUSION SYSTEMS 6-inch Scrap Reclaim Extruder Application Film Scrap APPLICATION GUIDE Design Standard Ram Stuffer Dual Diameter Scrap Reclaimer Hot Melt Foam Scrap Davis-Standard
More informationSPC Floor Tile Turnkey Project
Date: 28/11/2018 SPC Floor Tile Turnkey Project Part Ι Project Evaluation Profit Estimate Reference(All calculation should based on local marketing price): Item Data SPC Sheet Production Output Production
More informationEAGLE 2000B EAGLE 2000BE EAGLE 2000EBT MUST READ MANUAL PRIOR TO INSTALLING MACHINE
EAGLE 2000B EAGLE 2000BE EAGLE 2000EBT MUST READ MANUAL PRIOR TO INSTALLING MACHINE Contents 1 Machine Safety Information 3 1.5 Safety Precautions Prior to Operating Machine 6 2 Machine Installation 7
More informationMODEL CMA-130VL PARTS MANUAL Rev 1.00
MODEL CMA-130VL PARTS MANUAL Rev 1.00 DISTRIBUTED EXCLUSIVELY BY CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com TABLE OF CONTENTS
More informationWAL-RICH CORPORATION SINCE 1950
HOSES 3/8 ID DOUBLE FEMALE HOSE - BAGGED BAGGED# SIZE Box 0802002 3/4 FHT x 4' 1 25 0802004 3/4 FHT x 5' 1 25 0802006 3/4 FHT x 6' 1 25 0802008 3/4 FHT x 8' 1 25 0802010 3/4 FHT x 10' 1 25 0802012 3/4
More informationCompfitt Group- A strong partner for the industry
Compfitt Group- A strong partner for the industry Things are developing with rapid speed. Changes are happening at a tremendous rate for each industrial company; changes that demand actions for the daily
More informationDrain Cleaning Machine K-39
Drain Cleaning Machine K- 0 A- AUTOFEED Cable Chuck Pan Head Screw #0 - () Chuck Adapter Nose Piece Spiral Ring () Hand Grip Sleeve Clamp Springs () See Service Notes 0 Spacer Clips () Gasket Drum Front
More informationRANDCASTLE S Taskmaster
Taskmaster The 36:1 L/D Taskmaster can do more than any other single screw extruder mixing and devolatilizing like a twin with triple vents. The patent pending mixing technology, previously available only
More informationMADE IN THE USA FOUNDRY & FORGING AIRLESS SHOT BLAST & PARTS WASHING EQUIPMENT
MADE IN THE USA FOUNDRY & FORGING AIRLESS SHOT BLAST & PARTS WASHING EQUIPMENT 06-2011 CHAINBELT FLOW THROUGH BLASTERS CB 3624 This type of system offers the potential for reducing blaster operation and
More informationMD-S7000. All Electric Injection Molding Machine NIIGATA MACHINE TECHNO CO.,LTD.
MD-S7000 All Electric Injection Molding Machine NIIGATA MACHINE TECHNO CO.,LTD. MD-S7000Series Specifications External Dimension Diagram(MD200S7000) Injection Unit Item Unit MD200S7000 MD310S7000 MD385S7000
More informationPet blow Molding Machine 4KVT
Pet blow Molding Machine 4KVT 1. TECHANICAL SPECIFICATION 2. SCOPE OF SUPPLY 3. TECHANICAL SPECIFICATIONS OF EQUIPMENTS 4. ADDITIONAL FEATURES 5. MATERIAL USED APPLICATION- PET BOTTLES FOR WATER, JUICE,
More informationCOMPLETE LINE FOR NON SINTERED PTFE TAPE. 1-Mixing tumbler
COMPLETE LINE FOR NON SINTERED PTFE TAPE 1-Mixing tumbler This machine is used for mixing powders and additives to obtain after a certain amount of time, an amalgamated product with a pasty consistency.
More informationANNEXURE-A SPECIFICATIONS FOR HOT MIX PLANT
ANNEXURE-A SPECIFICATIONS FOR HOT MIX PLANT COLD AGGREGATE BIN FEEDER FEEDING HOPPERS Four Nos. Cold aggregates hopper with a heaped capacity of approx. 52 T. Wide opening bin width to accommodate different
More informationProduct Specification RobExtractSpray 2400/4400
Product Specification RobExtractSpray 2400/4400 3HXC 7111-1 December 1999 ABB Flexible Automation The information in this document can be subject to change without prior notice and should not be regarded
More informationSECTION COMPRESSED AIR SYSTEM. A. Pipe and pipe fittings, including valves, unions and couplings.
SECTION 15481 COMPRESSED AIR SYSTEM PART 1 - GENERAL 1.1 SECTION INCLUDES A. Pipe and pipe fittings, including valves, unions and couplings. B. Air compressor. C. After cooler. D. Refrigerated air dryer.
More informationVacuum filters. Established for industrial dewatering
Vacuum filters Established for industrial dewatering Vacuum filters Vacuum filters Vacuum filtration is a well established technique used in industrial dewatering. Metso has successfully delivered and
More informationInstallation and operation Manual
SJZ51/105 Conic Twin Screw Extruder Installation and operation Manual JIANGSU FAYGO UNION MACHINERY CO., LTD Address: No.8 FeiXIANG Road TEL: +86-512-56762818 Economic Development Zone FAX: +86-512-56762800
More informationPARTS MANUAL Rev 1.00B DISTRIBUTED EXCLUSIVELY BY CMA DISHMACHINES KNOTT AVENUE GARDEN GROVE, CALIFORNIA FAX
MODEL UC 60e PARTS MANUAL Rev 1.00B DISTRIBUTED EXCLUSIVELY BY CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854- 6417 FAX 714-895-2141 www.cmadishmachines.com TABLE OF CONTENTS
More informationTechnical description M 30-3C. Three compressions baler. The baler has continuing feeding and automatic working cycle
Technical description M 30-3C Three compressions baler The baler has continuing feeding and automatic working cycle CONTENTS What makes GPS balers the best in the world? M 30-3C baler in summary Choosing
More informationDRI-AIR INDUSTRIES, INC. ARID-X10C FLOOR MOUNT DRYER OPERATING MANUAL
ARID-X10C FLOOR MOUNT DRYER OPERATING MANUAL Page 1 DRI-AIR INDUSTRIES, INC. 16 THOMPSON ROAD P.O. BOX 1020 EAST WINDSOR, CT 06088-1020 Tel. (860) 627-5110 FAX (860) 623-4477 Internet http://www.dri-air.com
More informationPRE-BATCHER UNIT DRYER UNIT. Model: RM 350. Year of construction: Composed of:
Asphalt Plant INTRAME 350 RM Alicante, 24.10.2017 Asphalt Plant INTRAME 350 RM Offer number: A-160509-1994-01 Brand: INTRAME Model: RM 350 Capacity: 350 t/h Year of construction: 1994 Refurbished: 2004
More informationMade in the USA. The front and rear cover of each fan is anodized. This electrochemical process protects aluminum parts from corrosion and oxida on.
Vacuum Fans A 3 diameter fan assembly is a replacement part for Vactor machines. These fans are constructed to meet exact dimensional speciþ caon and each part in the fan assembly is coated with a protectant
More informationHD2 SPARE PARTS. Hot Air Dryer : TEMP. CONTROLLER TEMP. CONTROLLER CODE NO. PART NAME MACHINE MODEL PRICE (THB)
SPARE PARTS Hot Air Dryer : TEMP. CONTROLLER 105988 TEMP. CONTROLLER UNIT MR90HDA WITH : NYLON CONNECTOR 10~300 7, 106057 105990 TEMP. CONTROLLER PANEL PLATE MR90HD FOR STICKER MR90N1 (HDN01) STICKER MR90N1
More informationVENCO - STANDARD PUGMILL ( NON DE-AIR )
VENCO - STANDARD PUGMILL ( NON DE-AIR ) AVAILABLE SIZES: 75mm (3") nozzle 136m (5.3") barrel 180kg/hr (400lb/hr) production Hopper opening 115x100mm [4½x4 ] L x W x H [crated] 1.08 x 0.34 x 0.37 m [43
More informationS p u e p r e Pr P e r s e s s u s r u e r Tr T a r p a e p z e i z u i m G i r n i d n i d n i g n Mi M l i l
Super Pressure Trapezium Grinding Mill TGM Series Super Pressure Trapezium Mill is the latest grinding mill. TGM Series Supper Pressure Trapezium Mill is researched and designed by our experts basing on
More informationGroup-1 Agitators. Group-2 Air Conditioning Plant. Group-3 Air Handling Plant / Air Pressurisation System. Group-4 Belts (Conveyor, V & Wedge Belts)
Group-1 Agitators Group-2 Air Conditioning Plant Group-3 Air Handling Plant / Air Pressurisation System Group-4 Belts (Conveyor, V & Wedge Belts) Group-5 Boiler Pressure Parts / Bowl Mills Parts (Developed
More informationBITUMINOUS DIGITRAC AUTO STABILITY PRESS MARSHALL AUTOMATIC DIGITAL TESTER MARSHALL TESTING MACHINE W/ RECORDER MODELS
18 BITUMINOUS DIGITRAC AUTO STABILITY PRESS The DigiTrac stability press for the Marshall method allows the operator to initially set up the platen and then the load and flow values are digitally tracked
More information1600 Series Rotating Suction Screen
INTRODUCTION The 1600 Series Rotating Suction Screen is an Electric Motor (Hydraulic Option Available) driven, Self-Cleaning Suction Screen. It is ideally used for pumping water from canals, reservoirs,
More informationPlant Closed CONTINENTAL POLYMER CORP. 25 Patriot Circle Leominster, Massachusetts Approx. 40 Miles Northwest of Boston
Plastic Compounding and Extrusion Facility Including Pelletizing Lines to 6 Dia., Beringer Style Pelletizers, Carter Day Style Spin Dryers, Blenders, Wash Lines, Stainless Steel Hoppers, Granulators, Auxiliary
More information5 GALLON STRETCH BLOW MOLDING MACHINE MirageIndustries.com. 322 Breesport San Antonio, TX
5 GALLON STRETCH BLOW MOLDING MACHINE MirageIndustries.com 322 Breesport San Antonio, TX 78216 210.374.7433 210.473.4513 5 Gallon Stretch Blow Molding Machine Features 1. Special design for PET Gallon
More informationOPERATING INSTRUCTIONS. Automatic welding machine LARON Version 2.1
OPERATING INSTRUCTIONS Automatic welding machine LARON Version 2.1 Please read the operating instructions carefully before use and keep for further reference! Before start-up these operating instructions
More informationPLASMAC Ltd. Units 11&12 Aylesbury Business Centre Chamberlain Road Aylesbury Bucks. HP19 8DY. UK
PLASMAC Ltd. Units 11&12 Aylesbury Business Centre Chamberlain Road Aylesbury Bucks. HP19 8DY. UK Phone +44 (0)1296 398 698 Fax +44 (0)1296 395 110 Web www.plasmac.co.uk E-Mail sales@plasmac.co.uk Plasmac
More informationThe rotary type compressor consists of an integrally formed rotor and shaft, five vanes, and a cylinder.
W1860BE.book Page 12 Tuesday, January 28, 2003 11:01 PM 2. Cooling System A: COMPRESSOR The rotary type compressor consists of an integrally formed rotor and shaft, five vanes, and a cylinder. As the rotor
More informationQuality & Service Since For the Reduction of Metal Turnings to Shoveling Chips for Briquetting or Pneumatic Conveying
Quality & Service Since 1908 For the Reduction of Metal Turnings to Shoveling Chips for Briquetting or Pneumatic Conveying Features & Benefits Why it will pay you to have our Metal Turnings Crusher in
More informationPARTS BOOK. From S/N:
PARTS BOOK From S/N: 2786017 All spares available from The Engine Shed Top Station Road Brackley NN1 7UG Tel: 0845 108060 Fax: 01280 84545 Web: www.caterparts.com Copyright Notice: All rights reserved.
More informationAmeristar SUBMITTAL M4AH4E26B1A00AA. 2.0 Ton Multi-position Air Handler M4AH4E26B1A00AA TAG:
Ameristar TAG: M4AH4E26B1A00AA SUBMITTAL 2.0 Ton Multi-position Air Handler M4AH4E26B1A00AA ELECTRICAL CONNECTIONS MAY EXIT TOP OR EITHER SIDE NOTE: 2 CLEARANCE IS REQUIRED IN THE FRONT OF THE UNIT FOR
More informationCompfitt Group- A strong partner for the industry
Compfitt Group- A strong partner for the industry Things are developing with rapid speed. Changes are happening at a tremendous rate for each industrial company; changes that demand actions for the daily
More informationPT9600. Cable Actuated Encoder Reel. General. Environmental
Cable Actuated Encoder Reel Converts ANY Rotary Encoder to a Linear Position Sensor Linear Stroke Range up to 550 inches (14 m) Mates Virtually ANY Customer Supplied Encoder Factory Supplied Encoder Available
More informationVacuum and Pressure Solutions for the Plastics Industry
Vacuum and Pressure Solutions for the Plastics Industry Elmo Rietschle. Leading the Field. Why Elmo Rietschle? From our point of view, of course, we see many reasons why you should work with our company
More informationPortable honeycomb matrix compact dryer, with loading, combines dehumidifying plastic resin and conveying into a single unit.
Portable honeycomb matrix compact dryer, with loading, combines dehumidifying plastic resin and conveying into a single unit. Comet s CCD series compact honeycomb matrix dryers incorporate drying and dehumidifying
More informationParts and Service Manual
Section II Parts and Service Manual (70241A) CLARKE TECHNOLOGY Operator's Manual - MINI MAX Page -29- Frame and Front Cover Assembly Drawing 2/01 Page -30- CLARKE TECHNOLOGY Operator's Manual -MINI MAX
More informationMTM. Trapezium Mill. Shanghai Shibang Machinery Co., Ltd
MTM Trapezium Mill Shanghai Shibang Machinery Co., Ltd Shanghai Shibang Machinery Co., Ltd. Overview MTM Medium Speed Trapezium Mill adopts numbers of national patents, such as trapezium working surface,
More informationschoen + sandt machinery GmbH Lemberger Stra e 82 D Pirmasens Tel:
Technical Catalog Cutting Machines More than 150 years of perfect solutions www.schoen-sandt.de schoen + sandt machinery GmbH Lemberger Stra e 82 D-66955 Pirmasens Tel: +49 63 31 713 100 info@schoen-sandt.de
More informationOperating Instruction SAND MAKING MACHINE. Henan Hongxing Heavy Machinery Co., Ltd.
Operating Instruction SAND MAKING MACHINE Henan Hongxing Heavy Machinery Co., Ltd. Overview Vertical shaft impact crusher is also called sand maker which is highly efficient stone crushing equipment with
More informationCMA Dishmachines Knott Avenue Garden Grove, CA Undercounter High Temperature Dishwasher. Service Replacement Parts.
CMA Dishmachines 1700 Knott Avenue Garden Grove, CA 981 Toll Free: 1- (800) 8-617 Fax: 1- (71) 89-11 Service Replacement Parts Undercounter High Temperature Dishwasher Model: UC6e M Machine Serial No.
More informationChocolate Cooling Tunnel
Chocolate Cooling Tunnel Instruction Manual AMC-CT600 AMC SYSTEM TECHNOLOGY USA, INC. 1. Equipment Application AMC cooling tunnel is mainly used for cooling food industry. Such as the chocolate,candy,biscuit,
More informationUsed Fluid Handling Portable Used Oil Gravity Drains
Portable Used Oil Gravity Drains Choose the fluid handling equipment that fits your needs. Traditional Drain: the traditional method for handling used fluids allows gravity to drain fluids from vehicle(s)
More informationPLANAR GRINDING DIGIPREP PLAN FORCI PLAN
PLANAR GRINDING DIGIPREP PLAN FORCI PLAN DIGIPREP Plan DIGIPREP Plan Automatic Planar Grinder is designed for first step initial planar grinding of very large specimens or a high volume of specimens in
More informationBand Heaters. Rectangular Band Heaters, Strip, Ring and Flat Heaters. Contact Accessories, Connection Boxes, Clamping Devices
Band Heaters Mica Insulated Band Heaters (HM) Ceramic Insulated Band Heaters (KHM) Rectangular Band Heaters, Strip, Ring and Flat Heaters Protection Housings (WSM) Cast Heaters, Band, Flat or Custom Insulating
More informationMODEL UC50e PARTS MANUAL Rev 1.02
MODEL UC50e PARTS MANUAL Rev 1.02 DISTRIBUTED EXCLUSIVELY BY CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 www.cmadishmachines.com TABLE OF CONTENTS MODEL
More informationMachines and plant for tube and profile production
Gummi Fasern Kunststoffe, No. 10, 2007, pp. 659 663 Machines and plant for tube and profile production T. Pohl and F. Podzelny Process Development, Rubber Machines and Plant, Troester GmbH & Co. KG, Hanover,
More informationKelvin air conditioning. KELVIN Clim W280. Cooling Capacity: 280 ~ 1840 kw
Cooling Capacity: 280 ~ 1840 kw Water cooled liquid chillers in A class energy efficiency for indoor installation, equipped with oil-free centrifugal compressors with magnetic levitation bearings, flooded
More informationOPERATING MANUAL. BAK Thermoplastic Welding Technology AG 1
OPERATING MANUAL BAK Thermoplastic Welding Technology AG 1 SAFETY Danger to life Unplug the tool before opening it as live components and connections are exposed. Danger of fire and explosion in case of
More informationPRESS RELEASE PRIOR TO ELMIA POLYMER
PRESS RELEASE PRIOR TO ELMIA POLYMER THE FOLLOWING SUPPLIERS WILL BE REPRESENTED AND PRESENT IN OUR STAND 2015 Barwell Preformers Barwell is currently the leading manufacturer of performers for the rubber
More informationHakki Pilke Raven spare parts manual
1 ENGLISH Hakki Pilke Raven spare parts manual Valimotie 1, FI-85800 Haapajärvi, FINLAND Tel. +358 8 772 7300, Fax +358 8 772 732 info@maaselankone.fi, www.maaselankone.fi 2 Table of contents 1 Upper section
More informationMotor/Frame Assembly. Drain Cleaning Machine K Position Fan as Shown. Fan Mounting Detail
Drain Cleaning Machine K-0 Motor/Frame Assembly 0 0. Position Fan as Shown. Fan Mounting Detail Frame Assembly 0 Screw #0 - () Rubber Foot () 0 Carriage Bolt /" - x /" Flange Bearing () 0 Bracket 0 /"
More informationControl unit PPT/RS,, Controls the functions of the conveyor. Fully pneumatic. The maximum recommended distance between the conveyor and contr
Control unit PPT/RS,, 0111636 Controls the functions of the conveyor. Fully pneumatic. The maximum recommended distance between the conveyor and control unit is 10 metres when feed pressure is 0.6 MPa.
More informationSPARE PARTS LIST - VTA 6S - 400V 50Hz 3~ Version 2.1
Valid from 23rd June 2014 Supersedes all previously issued spare parts lists Subject to change without prior notice. 10c 10a 10b 303809 302754 302760 302759 305517 305544 302730 300422 305621 304845 302370
More informationLaminator II.WARM User Manual
Laminator II.WARM User Manual Eastsign International Limited Room 1818, 18/F., Shatin Galleria, 18-24 Shan Mei Street, Fotan, Shatin, N.T., Hong Kong TEL: + 852-2117 0098 FAX: + 852-2117 0099 Website:
More informationSSM-U Series Storage Mixers
SSM-U Series Storage Mixers Date: Oct, 2013 Version: Ver.A (English) Contents 1. General Description... 7 1.1 Coding Principle... 8 1.2 Feature... 8 1.3 Technical Specifications... 10 1.3.1 Technical
More informationAccuBrine automated brine maker Technical Specifications
Cargill Deicing Technology AccuBrine automated brine maker Technical Specifications All 4 models included Automated Blending System Model (ABM) Automated Blending Remote Truck Fill Model (ABRTF) Automated
More informationTechnical description
Rail profile grinding machine NRG Technical description Nencki Ltd Railway Technology Gaswerkstrasse 27 4901 Langenthal Switzerland Tel. +41 62 919 93 93 Fax +41 62 919 93 90 railway@nencki.ch www.nencki.ch
More informationPUMPKIN SEED HARVESTING TECHNOLOGY 2019
PUMPKIN SEED HARVESTING TECHNOLOGY 2019 Moty GmbH Piesing 20, AT 4846 Redlham office@moty.at www.moty.at Engineering changes, literal mistakes and prices are subjects to change Your reliable partner for
More informationThe equipment and materials shall be designed and constructed in accordance with the ASME code section I 2001 ED A02 and Chinese Standards.
Steam Boiler Type S50-3.82/450 Traveling grate stoker 50t/h x 3.82 pa x 450 Degree C 1. Basic use of the boiler The boiler can be used for industrial power generation, or thermal power station for enterprises
More informationVibratory and Centrifugal Surface Finishing Machinery and Systems
Finishing For The World Vibratory and Centrifugal Surface Finishing Machinery and Systems Round and Trough Vibratory Machines Continuous and Linked Automation Systems Centrifugal Disc Finishing Machines
More informationSection 8. Packaging Machinery. Contents. Stretch Wrap Machiery Strapping Machinery Shrink Wrap Machines...
Section 8 Contents Stretch Wrap Machiery...206 209 Strapping Machinery...210 215 Shrink Wrap Machines...216 217 Carton Sealing Machines...218-219 Paper Banding Machine...220 Stretch Wrap Machinery Extend
More informationHickory Rotisseries. Machine Type N / 5. 5 E 200ºF - 550ºF. Final Inspection:
Installation Manual USA Hickory Rotisseries Models: N/5.5 E Machine Type N / 5. 5 E Total Power Rating Elements / Spits Electrical Rating Temperature Range Timer Delivery Date: 6000 or 8400 Watts 4 Elements
More informationParts List. Stackable Crescent Cuber. Models KM-1601SAJ/3 KM-1601SWJ/3 KM-1601SRJ/3. hoshizakiamerica.com
Parts List Stackable Crescent Cuber Models KM-1601SAJ/3 KM-1601SWJ/3 KM-1601SRJ/3 hoshizakiamerica.com Number: 71375 Issued: 5-15-017 Revised: 10-3-018 CONTENTS Auxiliary Codes... 3 Note About Ordering
More informationC. ASSE 1013: Performance Requirements for Reduced Pressure Principle Backflow Preventers.
SECTION 22 10 00 PLUMBING PIPING AND PUMPS PART 1 - GENERAL 1.1 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design.
More informationUltimate energy saving technology
Ultimate energy saving technology CWT Chiller Series CWt purestream series water chillers The new CWT Purestream chiller range is specifically designed to meet the stringent cooling requirements of today
More informationSELF-CONTAINED VERTICAL AIR COOLED PACKAGE AIR-CONDITIONERS
SELF-CONTAINED VERTICAL AIR COOLED PACKAGE AIR-CONDITIONERS Cooling Capacity from 115,000 to 670,000 Btu/hr Btu/hr Smartwise Innovations... Towards Green, Quality & Reliability Solutions SERIES INTRODUCTION
More information