REPORT OF THE UMC VENTILATION TASK GROUP

Transcription

1 REPORT OF THE UMC VENTILATION TASK GROUP THE TASK GROUP PROPOSES TO REVISE CHAPTER 4, VENTILATION AIR SUPPLY OF THE UMC AS FOLLOWS: General. This chapter contains requirements for ventilation air supply and exhaust, evaporative cooling systems and make-up air requirement for direct gas fired heaters, industrial air heaters, and miscellaneous heaters. Ventilation (outdoor) air for occupants shall be designed in accordance with ANSI/ASHRAE Ventilation air supply requirements for specific occupancies are found in the Building Code Makeup Air Ventilation Air. Part I Ventilation Air General Requirements. All rooms and occupied spaces listed in Table 4-1 shall be designed to have ventilation (outdoor) air for occupants in accordance with this chapter Construction Documents. The outdoor air ventilation rate and air distribution assumptions made in the design of the ventilation system shall be clearly identified on the construction documents Natural Ventilation. Use of natural ventilation systems designed in accordance with this section shall be permitted in lieu of or in conjunction with mechanical ventilation systems. [ASHRAE 62.1:5.1] Exception to 402.2: An engineered natural ventilation system when approved by the authority having jurisdiction need not meet the requirements of and [ASHRAE 62.1:5.1] Location and Size of Openings. Naturally ventilated spaces shall be permanently open to and within 25 ft (8 m) of operable wall or roof openings to the outdoors, the openable area of which is a minimum of 4% of the net occupiable floor area. Where openings are covered with louvers or otherwise obstructed, openable area shall be based on the free unobstructed area through the opening. Where interior spaces without direct openings to the outdoors are ventilated through adjoining rooms, the opening between rooms shall be permanently unobstructed and have a free area of not less than 8% of the area of the interior room nor less than 25 ft 2 (2.3 m 2 ). [ASHRAE 62.1:5.1.1] Control and Accessibility. The means to open required operable openings shall be readily accessible to building occupants whenever the space is occupied. [ASHRAE 62.1:5.1.2] Mechanical Ventilation. Where natural ventilation is not permitted by this section or the building code, mechanical ventilation systems shall be designed, constructed and installed to provide a method of supply air and exhaust air. The system shall operate so that all rooms and spaces are continuously provided with the required ventilation rate while occupied Ventilation Rates The design outdoor air intake flow rate for a ventilation system shall be determined in accordance with sections through Zone Calculations. Zone parameters shall be determined in accordance with Sections through [ASHRAE 62.1:6.2.2]

2 Breathing Zone Outdoor Airflow. The design outdoor airflow required in the breathing zone of the occupiable space or spaces in a zone, i.e., the breathing zone outdoor airflow (Vbz), shall be determined in accordance with Equation 4-1. [ASHRAE 62.1: ] Vbz = RpPz + RaAz (4-1) where: Az = zone floor area: the net occupiable floor area of the zone ft 2 (m 2 ). Pz = zone population: the largest number of people expected to occupy the zone during typical usage. If the number of people expected to occupy the zone fluctuates, Pz shall be permitted to be estimated based on averaging approaches described in Section If Pz cannot be accurately predicted during design, it shall be estimated based on the zone floor area and the default occupant density listed in Table 4-1. Rp = outdoor airflow rate required per person as determined from Table 4-1. Ra = outdoor airflow rate required per unit area as determined from Table 4-1. [ASHRAE 62.1: ] Zone Air Distribution Effectiveness. The zone air distribution effectiveness (Ez) shall be determined using Table 4-2. [ASHRAE 62.1: ] Zone Outdoor Airflow. The design zone outdoor airflow (Voz), i.e., the outdoor airflow that must be provided to the zone by the supply air distribution system, shall be determined in accordance with Equation 4-2. [ASHRAE 62.1: ] Voz = Vbz/Ez (4-2) Single-Zone Systems. When one air handler supplies a mixture of outdoor air and recirculated air to only one zone, the outdoor air intake flow (Vot) shall be determined in accordance with Equation 4-3. [ASHRAE 62.1:6.3] Vot = Voz (4-3) % Outdoor Air Systems. When one air handler supplies only outdoor air to one or more zones, the outdoor air intake flow (Vot) shall be determined in accordance with Equation 4-4. [ASHRAE 62.1:6.2.4] Vot = _Σall zonesvoz (4-4) Multiple-Zone Recirculating Systems. When one air handler supplies a mixture of outdoor air and recirculated return air to more than one zone, the outdoor air intake flow (Vot) shall be determined in accordance with Sections through [ASHRAE 62.1:6.2.5] Primary Outdoor Air Fraction. When Table 4-3 is used to determine system ventilation efficiency, the zone primary outdoor air fraction (Zp) shall be determined in accordance with Equation 4-5. [ASHRAE 62.1: ] Zp = Voz/Vpz (4-5) Vpz is the primary airflow to the zone from the air handler including outdoor air and recirculated return air. [ASHRAE 62.1: ] System Ventilation Efficiency. The system ventilation efficiency (Ev) shall be determined using Table 4-3 or Appendix A of ASHRAE [ASHRAE 62.1: ]

3 Uncorrected Outdoor Air Intake. The design uncorrected outdoor air intake (Vou) shall be determined in accordance with Equation 4-6. [ASHRAE 62.1: ] Vou = D _Σall zones RpPz + _Σall zones RaAz (4-6) The occupant diversity, D, shall be permitted to be used to account for variations in occupancy within the zones served by the system. [ASHRAE 62.1: ] The occupancy diversity is defined as D = Ps/_Σall zones Pz (4-7) where the system population (Ps) is the total population in the area served by the system. Alternative methods shall be permitted to be used to account for population diversity when calculating Vou, provided that the resulting value is no less than that determined by Equation 4-6. [ASHRAE 62.1: ] Outdoor Air Intake. The design outdoor air intake flow (Vot) shall be determined in accordance with Equation 4-8. [ASHRAE 62.1: ] Vot = Vou/Ev (4-8) Design for Varying Operating Conditions Variable Load Conditions. Ventilation systems shall be designed to be capable of providing the required ventilation rates in the breathing zone whenever the zones served by the system are occupied, including all full- and part-load condition. [ASHRAE 62.1: ] TABLE 4-1 MINIMUM VENTILATION RATES IN BREATHING ZONE 2, 3 [ASHRAE 62.1:Table 6-1] Occupancy Category 6 Correctional Facilities People Outdoor Air Rate R P (cfm/person) Area Outdoor Air rate R A (cfm/ft 2 ) Default Occupant Density 4 (people/1000 ft 2 ) Cell Day room Guard stations Booking/waiting Educational Facilities Daycare (through age 4) Classrooms (ages 5-8) Classrooms (age 9 plus) Lecture classroom Lecture hall (fixed seats) Art classroom

4 Science laboratories E Wood/metal shop Computer lab TABLE 4-1 MINIMUM VENTILATION RATES IN BREATHING ZONE 2, 3 (Continued) Occupancy Category People Outdoor Air Rate R P (cfm/person) Area Outdoor Air Rate R A (cfm/ft 2 ) Default Occupant Density 4 (people/1000 ft 2 ) Media center A Music/theater/dance Multi-use assembly University/College Laboratories Food and Beverage Service Restaurant dining rooms Cafeteria/fast food dining Bars, cocktail lounges General Conference/meeting Corridors Storage rooms B Hotels, Motels, Resorts, Dormitories Bedroom/living Room Barracks sleeping areas Lobbies/pre-function Multi-purpose assembly Office Buildings Office space Reception areas Telephone/data entry Main entry lobbies Miscellaneous spaces Bank vaults/safe deposit

5 deposit Computer (not printing) Pharmacy (prep. area) Photo studios TABLE 4-1 MINIMUM VENTILATION RATES IN BREATHING ZONE 2, 3 (Continued) Occupancy Category 6 People Outdoor Air Rate R P (cfm/person) Area Outdoor Air Rate R A (cfm/ft 2 ) Default Occupant Density 4 (people/1000 ft 2 ) Shipping/receiving B Transportation waiting Warehouses B Public Assembly Spaces Auditorium seating area Places of religious worship Courtrooms Legislative chambers Libraries Lobbies Museums (children s) Museums/galleries Retail Sales (except as below) Mall common areas Barber shop Beauty and nail salons Pet shops (animal areas) Supermarket Coin-operated laundries Sports and Entertainment

6 Sports arena (play area) Gym, stadium (play area) Spectator areas Swimming (pool & deck) C TABLE 4-1 MINIMUM VENTILATION RATES IN BREATHING ZONE 2, 3 (Continued) Occupancy Category 6 People Outdoor Air Rate R P (cfm/person) Area Outdoor Air Rate R A (cfm/ft 2 ) Default Occupant Density 4 (people/1000 ft 2 ) Disco/dance floors Health club/aerobics room Health club/weight rooms Bowling alley (seating) Gambling casinos Game arcades Stages, studios D GENERAL NOTES FOR TABLE Smoking: This table applies to no-smoking areas. Rates for smoking-permitted spaces must be determined using other methods. 3 Air Density: Volumetric airflow rates are based on an air density of 1.2 kgda/m3 (0.075 lbda/ft3), which corresponds to dry air at a barometric pressure of kpa (1 atm) and an air temperature of 21 C (70 F). Rates shall be permitted to be adjusted for actual density but such adjustment is not required for compliance with this chapter. 4 Default Occupant Density: The default occupant density shall be used when actual occupant density is not known. 6 Unlisted Occupancies: If the occupancy category for a proposed space or zone is not listed, the requirements for the listed occupancy category that is most similar in terms of occupant density, activities and building construction shall be used. ITEM-SPECIFIC NOTES FOR TABLE 4.1 A For high school and college libraries, use values shown for Public Spaces Library. B Rate may not be sufficient when stored materials include those having potentially harmful emissions. C Rate does not allow for humidity control. Additional ventilation or dehumidification may be required to remove moisture. D Rate does not include special exhaust for stage effects, e.g., dry ice vapors, smoke. E No class of air has been established for this occupancy category Short-Term Conditions. If it is known that peak occupancy will be of short duration or the ventilation rate will be varied or interrupted for a short period of time, the design shall be permitted to be based on the average conditions over a time period T determined by Equation 4-9 [ASHRAE 62: Section ]: T = 3 v / Vbz (4-9) IP

7 where: T = averaging time period, (min) v = the volume of the zone for which averaging is being applied, ft 3 (m 3 ). Vbz = the breathing zone outdoor airflow calculated using Equation 6-1 and the design value of the zone population Pz, cfm (L/s). TABLE 4-2 Zone Air Distribution Effectiveness Air Distribution Configuration Ez Ceiling supply of cool air 1.0 Ceiling supply of warm air and floor return 1.0 Ceiling supply of warm air at least 15 F (8 C) above 0.8 space temperature and ceiling return. Ceiling supply of warm air less than 15 F (8 C) above space temperature and ceiling return provided that the 150 fpm (0.8 m/s) supply air jet reaches to within 4.5 ft (1.4 m) of floor level. 1.0 Floor supply of cool air and ceiling return provided that the 150 fpm (0.8 m/s) supply jet reaches at least 4.5 ft (1.4 m) above the floor. Floor supply of cool air and ceiling return, provided low- velocity displacement ventilation achieves unidirectional flow and thermal stratification Floor supply of warm air and floor return 1.0 Floor supply of warm air and ceiling return 0.7 Makeup supply drawn in on the opposite side of the room from the exhaust or return 0.8 Makeup supply drawn in near to the exhaust or 0.5 return location Notes for Table Cool air is air cooler than space temperature. 2. Warm air is air warmer than space temperature. 3. Ceiling includes any point above the breathing zone. 4. Floor includes any point below the breathing zone. 5. As an alternative to using the above values, determine Ez in accordance with ASHRAE Standard 129 for all air distribution configurations except unidirectional flow.

8 403.6 Dynamic Reset. The system shall be permitted to be designed to vary the design outdoor air intake flow (Vot), or the space or zone airflow as operating conditions change. TABLE 4-3 System Ventilation Efficiency Max (ZP) EV > 0.55 Use ASHRAE 62.1, Appendix A Notes for Table Max Zp refers to the largest value of Zp, calculated using Equation 4-5, among all the zones served by the system. 2. Interpolating between table values is permitted Exhaust Ventilation. Exhaust airflow shall be provided in accordance with the requirements in Table 4-4. Exhaust makeup air shall be permitted to be any combination of outdoor air, recirculated air, and transfer air. TABLE 4-4 Minimum Exhaust Rates Occupancy Category Exhaust Rate cfm/unit Exhaust Rate cfm/ft 2 Exhaust Rate L/s-unit Exhaust Rate L/s-m2 Art classrooms Auto repair rooms Barber shop Beauty and nail salons Cell with toilet Darkrooms Arena Kitchen commercial Kitchenettes Locker rooms

9 Locker/dressing rooms Parking garages Janitor, trash, recycle Pet shops (animal areas) Copy, printing rooms Science lab classrooms Toilets public 4 50/70-25/35 - Toilet private 5 25/ /25 - Woodwork shop/classroom Notes For Table Stands where engines are run shall have exhaust systems that directly connect to the engine exhaust and prevent escape of fumes. 2 The rates do not include exhaust from vehicles or equipment with internal combustion engines. 3 Exhaust not required if two or more sides comprise walls that are at least 50% open to the outside. 4 Rate is per water closet or urinal. Provide the higher rate where periods of heavy use are expected to occur, e.g., toilets in theatres, schools, and sports facilities. 5 Rate is for a toilet room intended to be occupied by one person at a time. For continuous system operation during normal hours of use, the lower rate may be used. Otherwise use the higher rate. [ASHRAE 62.2: Table 6-4] Makeup Air. Makeup-air requirements for direct gas-fired heaters, industrial air heaters, and miscellaneous heaters are found in Chapters 5 and 9. Delete heading Part II and renumber remaining sections in chapter 4. Example: Determine the outdoor air rate required for a single zone AC unit serving an interior 2000 ft 2 meeting/conference room with a design occupancy of 100 people. The system supplies and returns air from the ceiling. Per Table 4-2, the zone air distribution effectiveness is 1.0 since the system supplies cooling only from the ceiling. Using the rates from Table 4-1 for a meeting/conference room, the minimum system outdoor air rate is calculated to be: V ot = R p P z + R a A z E z = 5 x x = 620 cfm